Sign upLogin

Dragoniasty/NewsWorldFront

View on GitHub
Star

Showing 1,772 of 1,772 total issues

Identical blocks of code found in 2 locations. Consider refactoring.
Open

    var Swiper = function (container, params) {
        if (!(this instanceof Swiper)) return new Swiper(container, params);

        var defaults = {
            direction: 'horizontal',
Severity: Major
Found in src/bower_components/swiper/dist/js/swiper.js and 1 other location - About 7 mos to fix
src/bower_components/swiper/dist/js/swiper.jquery.js on lines 20..3015

Duplicated Code

Duplicated code can lead to software that is hard to understand and difficult to change. The Don't Repeat Yourself (DRY) principle states:

Every piece of knowledge must have a single, unambiguous, authoritative representation within a system.

When you violate DRY, bugs and maintenance problems are sure to follow. Duplicated code has a tendency to both continue to replicate and also to diverge (leaving bugs as two similar implementations differ in subtle ways).

Tuning

This issue has a mass of 33100.

We set useful threshold defaults for the languages we support but you may want to adjust these settings based on your project guidelines.

The threshold configuration represents the minimum mass a code block must have to be analyzed for duplication. The lower the threshold, the more fine-grained the comparison.

If the engine is too easily reporting duplication, try raising the threshold. If you suspect that the engine isn't catching enough duplication, try lowering the threshold. The best setting tends to differ from language to language.

See codeclimate-duplication's documentation for more information about tuning the mass threshold in your .codeclimate.yml.

Refactorings

Further Reading

Identical blocks of code found in 2 locations. Consider refactoring.
Open

    var Swiper = function (container, params) {
        if (!(this instanceof Swiper)) return new Swiper(container, params);

        var defaults = {
            direction: 'horizontal',
Severity: Major
Found in src/bower_components/swiper/dist/js/swiper.jquery.js and 1 other location - About 7 mos to fix
src/bower_components/swiper/dist/js/swiper.js on lines 20..3015

Duplicated Code

Duplicated code can lead to software that is hard to understand and difficult to change. The Don't Repeat Yourself (DRY) principle states:

Every piece of knowledge must have a single, unambiguous, authoritative representation within a system.

When you violate DRY, bugs and maintenance problems are sure to follow. Duplicated code has a tendency to both continue to replicate and also to diverge (leaving bugs as two similar implementations differ in subtle ways).

Tuning

This issue has a mass of 33100.

We set useful threshold defaults for the languages we support but you may want to adjust these settings based on your project guidelines.

The threshold configuration represents the minimum mass a code block must have to be analyzed for duplication. The lower the threshold, the more fine-grained the comparison.

If the engine is too easily reporting duplication, try raising the threshold. If you suspect that the engine isn't catching enough duplication, try lowering the threshold. The best setting tends to differ from language to language.

See codeclimate-duplication's documentation for more information about tuning the mass threshold in your .codeclimate.yml.

Refactorings

Further Reading

Similar blocks of code found in 2 locations. Consider refactoring.
Open

    var Dom7 = (function () {
        var Dom7 = function (arr) {
            var _this = this, i = 0;
            // Create array-like object
            for (i = 0; i < arr.length; i++) {
Severity: Major
Found in src/bower_components/swiper/dist/js/swiper.js and 1 other location - About 1 mo to fix
src/bower_components/swiper/src/js/dom.js on lines 4..650

Duplicated Code

Duplicated code can lead to software that is hard to understand and difficult to change. The Don't Repeat Yourself (DRY) principle states:

Every piece of knowledge must have a single, unambiguous, authoritative representation within a system.

When you violate DRY, bugs and maintenance problems are sure to follow. Duplicated code has a tendency to both continue to replicate and also to diverge (leaving bugs as two similar implementations differ in subtle ways).

Tuning

This issue has a mass of 6625.

We set useful threshold defaults for the languages we support but you may want to adjust these settings based on your project guidelines.

The threshold configuration represents the minimum mass a code block must have to be analyzed for duplication. The lower the threshold, the more fine-grained the comparison.

If the engine is too easily reporting duplication, try raising the threshold. If you suspect that the engine isn't catching enough duplication, try lowering the threshold. The best setting tends to differ from language to language.

See codeclimate-duplication's documentation for more information about tuning the mass threshold in your .codeclimate.yml.

Refactorings

Further Reading

Similar blocks of code found in 2 locations. Consider refactoring.
Open

var Dom7 = (function () {
    var Dom7 = function (arr) {
        var _this = this, i = 0;
        // Create array-like object
        for (i = 0; i < arr.length; i++) {
Severity: Major
Found in src/bower_components/swiper/src/js/dom.js and 1 other location - About 1 mo to fix
src/bower_components/swiper/dist/js/swiper.js on lines 3086..3732

Duplicated Code

Duplicated code can lead to software that is hard to understand and difficult to change. The Don't Repeat Yourself (DRY) principle states:

Every piece of knowledge must have a single, unambiguous, authoritative representation within a system.

When you violate DRY, bugs and maintenance problems are sure to follow. Duplicated code has a tendency to both continue to replicate and also to diverge (leaving bugs as two similar implementations differ in subtle ways).

Tuning

This issue has a mass of 6625.

We set useful threshold defaults for the languages we support but you may want to adjust these settings based on your project guidelines.

The threshold configuration represents the minimum mass a code block must have to be analyzed for duplication. The lower the threshold, the more fine-grained the comparison.

If the engine is too easily reporting duplication, try raising the threshold. If you suspect that the engine isn't catching enough duplication, try lowering the threshold. The best setting tends to differ from language to language.

See codeclimate-duplication's documentation for more information about tuning the mass threshold in your .codeclimate.yml.

Refactorings

Further Reading

Similar blocks of code found in 2 locations. Consider refactoring.
Open

function $StateProvider(   $urlRouterProvider,   $urlMatcherFactory) {

  var root, states = {}, $state, queue = {}, abstractKey = 'abstract';

  // Builds state properties from definition passed to registerState()
Severity: Major
Found in src/bower_components/angular-ui-router/src/state.js and 1 other location - About 1 mo to fix
src/bower_components/angular-ui-router/release/angular-ui-router.js on lines 2208..3651

Duplicated Code

Duplicated code can lead to software that is hard to understand and difficult to change. The Don't Repeat Yourself (DRY) principle states:

Every piece of knowledge must have a single, unambiguous, authoritative representation within a system.

When you violate DRY, bugs and maintenance problems are sure to follow. Duplicated code has a tendency to both continue to replicate and also to diverge (leaving bugs as two similar implementations differ in subtle ways).

Tuning

This issue has a mass of 6162.

We set useful threshold defaults for the languages we support but you may want to adjust these settings based on your project guidelines.

The threshold configuration represents the minimum mass a code block must have to be analyzed for duplication. The lower the threshold, the more fine-grained the comparison.

If the engine is too easily reporting duplication, try raising the threshold. If you suspect that the engine isn't catching enough duplication, try lowering the threshold. The best setting tends to differ from language to language.

See codeclimate-duplication's documentation for more information about tuning the mass threshold in your .codeclimate.yml.

Refactorings

Further Reading

Similar blocks of code found in 2 locations. Consider refactoring.
Open

function $StateProvider(   $urlRouterProvider,   $urlMatcherFactory) {

  var root, states = {}, $state, queue = {}, abstractKey = 'abstract';

  // Builds state properties from definition passed to registerState()
Severity: Major
Found in src/bower_components/angular-ui-router/release/angular-ui-router.js and 1 other location - About 1 mo to fix
src/bower_components/angular-ui-router/src/state.js on lines 23..1466

Duplicated Code

Duplicated code can lead to software that is hard to understand and difficult to change. The Don't Repeat Yourself (DRY) principle states:

Every piece of knowledge must have a single, unambiguous, authoritative representation within a system.

When you violate DRY, bugs and maintenance problems are sure to follow. Duplicated code has a tendency to both continue to replicate and also to diverge (leaving bugs as two similar implementations differ in subtle ways).

Tuning

This issue has a mass of 6162.

We set useful threshold defaults for the languages we support but you may want to adjust these settings based on your project guidelines.

The threshold configuration represents the minimum mass a code block must have to be analyzed for duplication. The lower the threshold, the more fine-grained the comparison.

If the engine is too easily reporting duplication, try raising the threshold. If you suspect that the engine isn't catching enough duplication, try lowering the threshold. The best setting tends to differ from language to language.

See codeclimate-duplication's documentation for more information about tuning the mass threshold in your .codeclimate.yml.

Refactorings

Further Reading

Similar blocks of code found in 2 locations. Consider refactoring.
Open

function MdTabsController ($scope, $element, $window, $mdConstant, $mdTabInkRipple,
                           $mdUtil, $animateCss, $attrs, $compile, $mdTheming) {
  // define private properties
  var ctrl      = this,
      locked    = false,
Severity: Major
Found in src/bower_components/angular-material/modules/js/tabs/tabs.js and 1 other location - About 1 mo to fix
src/bower_components/angular-material/modules/closure/tabs/tabs.js on lines 215..978

Duplicated Code

Duplicated code can lead to software that is hard to understand and difficult to change. The Don't Repeat Yourself (DRY) principle states:

Every piece of knowledge must have a single, unambiguous, authoritative representation within a system.

When you violate DRY, bugs and maintenance problems are sure to follow. Duplicated code has a tendency to both continue to replicate and also to diverge (leaving bugs as two similar implementations differ in subtle ways).

Tuning

This issue has a mass of 5661.

We set useful threshold defaults for the languages we support but you may want to adjust these settings based on your project guidelines.

The threshold configuration represents the minimum mass a code block must have to be analyzed for duplication. The lower the threshold, the more fine-grained the comparison.

If the engine is too easily reporting duplication, try raising the threshold. If you suspect that the engine isn't catching enough duplication, try lowering the threshold. The best setting tends to differ from language to language.

See codeclimate-duplication's documentation for more information about tuning the mass threshold in your .codeclimate.yml.

Refactorings

Further Reading

Similar blocks of code found in 2 locations. Consider refactoring.
Open

function MdTabsController ($scope, $element, $window, $mdConstant, $mdTabInkRipple,
                           $mdUtil, $animateCss, $attrs, $compile, $mdTheming) {
  // define private properties
  var ctrl      = this,
      locked    = false,
Severity: Major
Found in src/bower_components/angular-material/modules/closure/tabs/tabs.js and 1 other location - About 1 mo to fix
src/bower_components/angular-material/modules/js/tabs/tabs.js on lines 215..978

Duplicated Code

Duplicated code can lead to software that is hard to understand and difficult to change. The Don't Repeat Yourself (DRY) principle states:

Every piece of knowledge must have a single, unambiguous, authoritative representation within a system.

When you violate DRY, bugs and maintenance problems are sure to follow. Duplicated code has a tendency to both continue to replicate and also to diverge (leaving bugs as two similar implementations differ in subtle ways).

Tuning

This issue has a mass of 5661.

We set useful threshold defaults for the languages we support but you may want to adjust these settings based on your project guidelines.

The threshold configuration represents the minimum mass a code block must have to be analyzed for duplication. The lower the threshold, the more fine-grained the comparison.

If the engine is too easily reporting duplication, try raising the threshold. If you suspect that the engine isn't catching enough duplication, try lowering the threshold. The best setting tends to differ from language to language.

See codeclimate-duplication's documentation for more information about tuning the mass threshold in your .codeclimate.yml.

Refactorings

Further Reading

Similar blocks of code found in 2 locations. Consider refactoring.
Open

function MdAutocompleteCtrl ($scope, $element, $mdUtil, $mdConstant, $mdTheming, $window,
                             $animate, $rootElement, $attrs, $q) {
  //-- private variables
  var ctrl                 = this,
      itemParts            = $scope.itemsExpr.split(/ in /i),
Severity: Major
Found in src/bower_components/angular-material/modules/closure/autocomplete/autocomplete.js and 1 other location - About 1 mo to fix
src/bower_components/angular-material/modules/js/autocomplete/autocomplete.js on lines 32..801

Duplicated Code

Duplicated code can lead to software that is hard to understand and difficult to change. The Don't Repeat Yourself (DRY) principle states:

Every piece of knowledge must have a single, unambiguous, authoritative representation within a system.

When you violate DRY, bugs and maintenance problems are sure to follow. Duplicated code has a tendency to both continue to replicate and also to diverge (leaving bugs as two similar implementations differ in subtle ways).

Tuning

This issue has a mass of 5190.

We set useful threshold defaults for the languages we support but you may want to adjust these settings based on your project guidelines.

The threshold configuration represents the minimum mass a code block must have to be analyzed for duplication. The lower the threshold, the more fine-grained the comparison.

If the engine is too easily reporting duplication, try raising the threshold. If you suspect that the engine isn't catching enough duplication, try lowering the threshold. The best setting tends to differ from language to language.

See codeclimate-duplication's documentation for more information about tuning the mass threshold in your .codeclimate.yml.

Refactorings

Further Reading

Similar blocks of code found in 2 locations. Consider refactoring.
Open

function MdAutocompleteCtrl ($scope, $element, $mdUtil, $mdConstant, $mdTheming, $window,
                             $animate, $rootElement, $attrs, $q) {
  //-- private variables
  var ctrl                 = this,
      itemParts            = $scope.itemsExpr.split(/ in /i),
Severity: Major
Found in src/bower_components/angular-material/modules/js/autocomplete/autocomplete.js and 1 other location - About 1 mo to fix
src/bower_components/angular-material/modules/closure/autocomplete/autocomplete.js on lines 33..808

Duplicated Code

Duplicated code can lead to software that is hard to understand and difficult to change. The Don't Repeat Yourself (DRY) principle states:

Every piece of knowledge must have a single, unambiguous, authoritative representation within a system.

When you violate DRY, bugs and maintenance problems are sure to follow. Duplicated code has a tendency to both continue to replicate and also to diverge (leaving bugs as two similar implementations differ in subtle ways).

Tuning

This issue has a mass of 5190.

We set useful threshold defaults for the languages we support but you may want to adjust these settings based on your project guidelines.

The threshold configuration represents the minimum mass a code block must have to be analyzed for duplication. The lower the threshold, the more fine-grained the comparison.

If the engine is too easily reporting duplication, try raising the threshold. If you suspect that the engine isn't catching enough duplication, try lowering the threshold. The best setting tends to differ from language to language.

See codeclimate-duplication's documentation for more information about tuning the mass threshold in your .codeclimate.yml.

Refactorings

Further Reading

Similar blocks of code found in 2 locations. Consider refactoring.
Open

function SelectProvider($$interimElementProvider) {
  selectDefaultOptions.$inject = ["$mdSelect", "$mdConstant", "$mdUtil", "$window", "$q", "$$rAF", "$animateCss", "$animate", "$document"];
  return $$interimElementProvider('$mdSelect')
    .setDefaults({
      methods: ['target'],
Severity: Major
Found in src/bower_components/angular-material/modules/js/select/select.js and 1 other location - About 1 mo to fix
src/bower_components/angular-material/modules/closure/select/select.js on lines 902..1490

Duplicated Code

Duplicated code can lead to software that is hard to understand and difficult to change. The Don't Repeat Yourself (DRY) principle states:

Every piece of knowledge must have a single, unambiguous, authoritative representation within a system.

When you violate DRY, bugs and maintenance problems are sure to follow. Duplicated code has a tendency to both continue to replicate and also to diverge (leaving bugs as two similar implementations differ in subtle ways).

Tuning

This issue has a mass of 4593.

We set useful threshold defaults for the languages we support but you may want to adjust these settings based on your project guidelines.

The threshold configuration represents the minimum mass a code block must have to be analyzed for duplication. The lower the threshold, the more fine-grained the comparison.

If the engine is too easily reporting duplication, try raising the threshold. If you suspect that the engine isn't catching enough duplication, try lowering the threshold. The best setting tends to differ from language to language.

See codeclimate-duplication's documentation for more information about tuning the mass threshold in your .codeclimate.yml.

Refactorings

Further Reading

Similar blocks of code found in 2 locations. Consider refactoring.
Open

function SelectProvider($$interimElementProvider) {
  selectDefaultOptions.$inject = ["$mdSelect", "$mdConstant", "$mdUtil", "$window", "$q", "$$rAF", "$animateCss", "$animate", "$document"];
  return $$interimElementProvider('$mdSelect')
    .setDefaults({
      methods: ['target'],
Severity: Major
Found in src/bower_components/angular-material/modules/closure/select/select.js and 1 other location - About 1 mo to fix
src/bower_components/angular-material/modules/js/select/select.js on lines 902..1490

Duplicated Code

Duplicated code can lead to software that is hard to understand and difficult to change. The Don't Repeat Yourself (DRY) principle states:

Every piece of knowledge must have a single, unambiguous, authoritative representation within a system.

When you violate DRY, bugs and maintenance problems are sure to follow. Duplicated code has a tendency to both continue to replicate and also to diverge (leaving bugs as two similar implementations differ in subtle ways).

Tuning

This issue has a mass of 4593.

We set useful threshold defaults for the languages we support but you may want to adjust these settings based on your project guidelines.

The threshold configuration represents the minimum mass a code block must have to be analyzed for duplication. The lower the threshold, the more fine-grained the comparison.

If the engine is too easily reporting duplication, try raising the threshold. If you suspect that the engine isn't catching enough duplication, try lowering the threshold. The best setting tends to differ from language to language.

See codeclimate-duplication's documentation for more information about tuning the mass threshold in your .codeclimate.yml.

Refactorings

Further Reading

Similar blocks of code found in 2 locations. Consider refactoring.
Open

function UtilFactory($document, $timeout, $compile, $rootScope, $$mdAnimate, $interpolate, $log, $rootElement, $window) {
  // Setup some core variables for the processTemplate method
  var startSymbol = $interpolate.startSymbol(),
    endSymbol = $interpolate.endSymbol(),
    usesStandardSymbols = ((startSymbol === '{{') && (endSymbol === '}}'));
Severity: Major
Found in src/bower_components/angular-material/modules/js/core/core.js and 1 other location - About 3 wks to fix
src/bower_components/angular-material/modules/closure/core/core.js on lines 726..1365

Duplicated Code

Duplicated code can lead to software that is hard to understand and difficult to change. The Don't Repeat Yourself (DRY) principle states:

Every piece of knowledge must have a single, unambiguous, authoritative representation within a system.

When you violate DRY, bugs and maintenance problems are sure to follow. Duplicated code has a tendency to both continue to replicate and also to diverge (leaving bugs as two similar implementations differ in subtle ways).

Tuning

This issue has a mass of 4418.

We set useful threshold defaults for the languages we support but you may want to adjust these settings based on your project guidelines.

The threshold configuration represents the minimum mass a code block must have to be analyzed for duplication. The lower the threshold, the more fine-grained the comparison.

If the engine is too easily reporting duplication, try raising the threshold. If you suspect that the engine isn't catching enough duplication, try lowering the threshold. The best setting tends to differ from language to language.

See codeclimate-duplication's documentation for more information about tuning the mass threshold in your .codeclimate.yml.

Refactorings

Further Reading

Similar blocks of code found in 2 locations. Consider refactoring.
Open

function UtilFactory($document, $timeout, $compile, $rootScope, $$mdAnimate, $interpolate, $log, $rootElement, $window) {
  // Setup some core variables for the processTemplate method
  var startSymbol = $interpolate.startSymbol(),
    endSymbol = $interpolate.endSymbol(),
    usesStandardSymbols = ((startSymbol === '{{') && (endSymbol === '}}'));
Severity: Major
Found in src/bower_components/angular-material/modules/closure/core/core.js and 1 other location - About 3 wks to fix
src/bower_components/angular-material/modules/js/core/core.js on lines 724..1363

Duplicated Code

Duplicated code can lead to software that is hard to understand and difficult to change. The Don't Repeat Yourself (DRY) principle states:

Every piece of knowledge must have a single, unambiguous, authoritative representation within a system.

When you violate DRY, bugs and maintenance problems are sure to follow. Duplicated code has a tendency to both continue to replicate and also to diverge (leaving bugs as two similar implementations differ in subtle ways).

Tuning

This issue has a mass of 4418.

We set useful threshold defaults for the languages we support but you may want to adjust these settings based on your project guidelines.

The threshold configuration represents the minimum mass a code block must have to be analyzed for duplication. The lower the threshold, the more fine-grained the comparison.

If the engine is too easily reporting duplication, try raising the threshold. If you suspect that the engine isn't catching enough duplication, try lowering the threshold. The best setting tends to differ from language to language.

See codeclimate-duplication's documentation for more information about tuning the mass threshold in your .codeclimate.yml.

Refactorings

Further Reading

Similar blocks of code found in 2 locations. Consider refactoring.
Open

(function() {
  'use strict';

  // POST RELEASE
  // TODO(jelbourn): Demo that uses moment.js
Severity: Major
Found in src/bower_components/angular-material/modules/js/datepicker/datepicker.js and 1 other location - About 3 wks to fix
src/bower_components/angular-material/modules/closure/datepicker/datepicker.js on lines 1112..1742

Duplicated Code

Duplicated code can lead to software that is hard to understand and difficult to change. The Don't Repeat Yourself (DRY) principle states:

Every piece of knowledge must have a single, unambiguous, authoritative representation within a system.

When you violate DRY, bugs and maintenance problems are sure to follow. Duplicated code has a tendency to both continue to replicate and also to diverge (leaving bugs as two similar implementations differ in subtle ways).

Tuning

This issue has a mass of 3945.

We set useful threshold defaults for the languages we support but you may want to adjust these settings based on your project guidelines.

The threshold configuration represents the minimum mass a code block must have to be analyzed for duplication. The lower the threshold, the more fine-grained the comparison.

If the engine is too easily reporting duplication, try raising the threshold. If you suspect that the engine isn't catching enough duplication, try lowering the threshold. The best setting tends to differ from language to language.

See codeclimate-duplication's documentation for more information about tuning the mass threshold in your .codeclimate.yml.

Refactorings

Further Reading

Similar blocks of code found in 2 locations. Consider refactoring.
Open

(function() {
  'use strict';

  // POST RELEASE
  // TODO(jelbourn): Demo that uses moment.js
Severity: Major
Found in src/bower_components/angular-material/modules/closure/datepicker/datepicker.js and 1 other location - About 3 wks to fix
src/bower_components/angular-material/modules/js/datepicker/datepicker.js on lines 1111..1741

Duplicated Code

Duplicated code can lead to software that is hard to understand and difficult to change. The Don't Repeat Yourself (DRY) principle states:

Every piece of knowledge must have a single, unambiguous, authoritative representation within a system.

When you violate DRY, bugs and maintenance problems are sure to follow. Duplicated code has a tendency to both continue to replicate and also to diverge (leaving bugs as two similar implementations differ in subtle ways).

Tuning

This issue has a mass of 3945.

We set useful threshold defaults for the languages we support but you may want to adjust these settings based on your project guidelines.

The threshold configuration represents the minimum mass a code block must have to be analyzed for duplication. The lower the threshold, the more fine-grained the comparison.

If the engine is too easily reporting duplication, try raising the threshold. If you suspect that the engine isn't catching enough duplication, try lowering the threshold. The best setting tends to differ from language to language.

See codeclimate-duplication's documentation for more information about tuning the mass threshold in your .codeclimate.yml.

Refactorings

Further Reading

Similar blocks of code found in 2 locations. Consider refactoring.
Open

function MenuProvider($$interimElementProvider) {
  var MENU_EDGE_MARGIN = 8;

  menuDefaultOptions.$inject = ["$mdUtil", "$mdTheming", "$mdConstant", "$document", "$window", "$q", "$$rAF", "$animateCss", "$animate"];
  return $$interimElementProvider('$mdMenu')
Severity: Major
Found in src/bower_components/angular-material/modules/closure/menu/menu.js and 1 other location - About 3 wks to fix
src/bower_components/angular-material/modules/js/menu/menu.js on lines 478..975

Duplicated Code

Duplicated code can lead to software that is hard to understand and difficult to change. The Don't Repeat Yourself (DRY) principle states:

Every piece of knowledge must have a single, unambiguous, authoritative representation within a system.

When you violate DRY, bugs and maintenance problems are sure to follow. Duplicated code has a tendency to both continue to replicate and also to diverge (leaving bugs as two similar implementations differ in subtle ways).

Tuning

This issue has a mass of 3883.

We set useful threshold defaults for the languages we support but you may want to adjust these settings based on your project guidelines.

The threshold configuration represents the minimum mass a code block must have to be analyzed for duplication. The lower the threshold, the more fine-grained the comparison.

If the engine is too easily reporting duplication, try raising the threshold. If you suspect that the engine isn't catching enough duplication, try lowering the threshold. The best setting tends to differ from language to language.

See codeclimate-duplication's documentation for more information about tuning the mass threshold in your .codeclimate.yml.

Refactorings

Further Reading

Similar blocks of code found in 2 locations. Consider refactoring.
Open

function MenuProvider($$interimElementProvider) {
  var MENU_EDGE_MARGIN = 8;

  menuDefaultOptions.$inject = ["$mdUtil", "$mdTheming", "$mdConstant", "$document", "$window", "$q", "$$rAF", "$animateCss", "$animate"];
  return $$interimElementProvider('$mdMenu')
Severity: Major
Found in src/bower_components/angular-material/modules/js/menu/menu.js and 1 other location - About 3 wks to fix
src/bower_components/angular-material/modules/closure/menu/menu.js on lines 478..975

Duplicated Code

Duplicated code can lead to software that is hard to understand and difficult to change. The Don't Repeat Yourself (DRY) principle states:

Every piece of knowledge must have a single, unambiguous, authoritative representation within a system.

When you violate DRY, bugs and maintenance problems are sure to follow. Duplicated code has a tendency to both continue to replicate and also to diverge (leaving bugs as two similar implementations differ in subtle ways).

Tuning

This issue has a mass of 3883.

We set useful threshold defaults for the languages we support but you may want to adjust these settings based on your project guidelines.

The threshold configuration represents the minimum mass a code block must have to be analyzed for duplication. The lower the threshold, the more fine-grained the comparison.

If the engine is too easily reporting duplication, try raising the threshold. If you suspect that the engine isn't catching enough duplication, try lowering the threshold. The best setting tends to differ from language to language.

See codeclimate-duplication's documentation for more information about tuning the mass threshold in your .codeclimate.yml.

Refactorings

Further Reading

Similar blocks of code found in 2 locations. Consider refactoring.
Open

function MdDialogProvider($$interimElementProvider) {
  // Elements to capture and redirect focus when the user presses tab at the dialog boundary.
  var topFocusTrap, bottomFocusTrap;

  advancedDialogOptions.$inject = ["$mdDialog", "$mdTheming", "$mdConstant"];
Severity: Major
Found in src/bower_components/angular-material/modules/js/dialog/dialog.js and 1 other location - About 3 wks to fix
src/bower_components/angular-material/modules/closure/dialog/dialog.js on lines 495..1079

Duplicated Code

Duplicated code can lead to software that is hard to understand and difficult to change. The Don't Repeat Yourself (DRY) principle states:

Every piece of knowledge must have a single, unambiguous, authoritative representation within a system.

When you violate DRY, bugs and maintenance problems are sure to follow. Duplicated code has a tendency to both continue to replicate and also to diverge (leaving bugs as two similar implementations differ in subtle ways).

Tuning

This issue has a mass of 3819.

We set useful threshold defaults for the languages we support but you may want to adjust these settings based on your project guidelines.

The threshold configuration represents the minimum mass a code block must have to be analyzed for duplication. The lower the threshold, the more fine-grained the comparison.

If the engine is too easily reporting duplication, try raising the threshold. If you suspect that the engine isn't catching enough duplication, try lowering the threshold. The best setting tends to differ from language to language.

See codeclimate-duplication's documentation for more information about tuning the mass threshold in your .codeclimate.yml.

Refactorings

Further Reading

Similar blocks of code found in 2 locations. Consider refactoring.
Open

function MdDialogProvider($$interimElementProvider) {
  // Elements to capture and redirect focus when the user presses tab at the dialog boundary.
  var topFocusTrap, bottomFocusTrap;

    advancedDialogOptions.$inject = ["$mdDialog", "$mdTheming", "$mdConstant"];
Severity: Major
Found in src/bower_components/angular-material/modules/closure/dialog/dialog.js and 1 other location - About 3 wks to fix
src/bower_components/angular-material/modules/js/dialog/dialog.js on lines 495..1079

Duplicated Code

Duplicated code can lead to software that is hard to understand and difficult to change. The Don't Repeat Yourself (DRY) principle states:

Every piece of knowledge must have a single, unambiguous, authoritative representation within a system.

When you violate DRY, bugs and maintenance problems are sure to follow. Duplicated code has a tendency to both continue to replicate and also to diverge (leaving bugs as two similar implementations differ in subtle ways).

Tuning

This issue has a mass of 3819.

We set useful threshold defaults for the languages we support but you may want to adjust these settings based on your project guidelines.

The threshold configuration represents the minimum mass a code block must have to be analyzed for duplication. The lower the threshold, the more fine-grained the comparison.

If the engine is too easily reporting duplication, try raising the threshold. If you suspect that the engine isn't catching enough duplication, try lowering the threshold. The best setting tends to differ from language to language.

See codeclimate-duplication's documentation for more information about tuning the mass threshold in your .codeclimate.yml.

Refactorings

Further Reading

Severity
Category
Status
Source
Language