return $.fn.geolocateMap = function(method) {

Close

Disallow Assignment in return Statement (no-return-assign)

One of the interesting, and sometimes confusing, aspects of JavaScript is that assignment can happen at almost any point. Because of this, an errant equals sign can end up causing assignment when the true intent was to do a comparison. This is especially true when using a return statement. For example:

function doSomething() {
    return foo = bar + 2;
}

It is difficult to tell the intent of the return statement here. It's possible that the function is meant to return the result of bar + 2, but then why is it assigning to foo? It's also possible that the intent was to use a comparison operator such as == and that this code is an error.

Because of this ambiguity, it's considered a best practice to not use assignment in return statements.

Rule Details

This rule aims to eliminate assignments from return statements. As such, it will warn whenever an assignment is found as part of return.

Options

The rule takes one option, a string, which must contain one of the following values:

• except-parens (default): Disallow assignments unless they are enclosed in parentheses.
• always: Disallow all assignments.

except-parens

This is the default option. It disallows assignments unless they are enclosed in parentheses.

Examples of incorrect code for the default "except-parens" option:

/*eslint no-return-assign: "error"*/

function doSomething() {
    return foo = bar + 2;
}

function doSomething() {
    return foo += 2;
}

Examples of correct code for the default "except-parens" option:

/*eslint no-return-assign: "error"*/

function doSomething() {
    return foo == bar + 2;
}

function doSomething() {
    return foo === bar + 2;
}

function doSomething() {
    return (foo = bar + 2);
}

always

This option disallows all assignments in return statements. All assignments are treated as problems.

Examples of incorrect code for the "always" option:

/*eslint no-return-assign: ["error", "always"]*/

function doSomething() {
    return foo = bar + 2;
}

function doSomething() {
    return foo += 2;
}

function doSomething() {
    return (foo = bar + 2);
}

Examples of correct code for the "always" option:

/*eslint no-return-assign: ["error", "always"]*/

function doSomething() {
    return foo == bar + 2;
}

function doSomething() {
    return foo === bar + 2;
}

When Not To Use It

If you want to allow the use of assignment operators in a return statement, then you can safely disable this rule. Source: http://eslint.org/docs/rules/

      user, review, _helpful, _unhelpful = retrieve_both

Close

This cop checks for underscore-prefixed variables that are actually used.

Example:

# bad

[1, 2, 3].each do |_num|
  do_something(_num)
end

Example:

# good

[1, 2, 3].each do |num|
  do_something(num)
end

Example:

# good

[1, 2, 3].each do |_num|
  do_something # not using `_num`
end

      user, review, _helpful, _unhelpful = retrieve_both

Close

This cop checks for underscore-prefixed variables that are actually used.

Example:

# bad

[1, 2, 3].each do |_num|
  do_something(_num)
end

Example:

# good

[1, 2, 3].each do |num|
  do_something(num)
end

Example:

# good

[1, 2, 3].each do |_num|
  do_something # not using `_num`
end

  (function($) {

Close

Require IIFEs to be Wrapped (wrap-iife)

You can immediately invoke function expressions, but not function declarations. A common technique to create an immediately-invoked function expression (IIFE) is to wrap a function declaration in parentheses. The opening parentheses causes the contained function to be parsed as an expression, rather than a declaration.

// function expression could be unwrapped
var x = function () { return { y: 1 };}();

// function declaration must be wrapped
function () { /* side effects */ }(); // SyntaxError

Rule Details

This rule requires all immediately-invoked function expressions to be wrapped in parentheses.

Options

This rule has two options, a string option and an object option.

String option:

• "outside" enforces always wrapping the call expression. The default is "outside".
• "inside" enforces always wrapping the function expression.
• "any" enforces always wrapping, but allows either style.

Object option:

• "functionPrototypeMethods": true additionally enforces wrapping function expressions invoked using .call and .apply. The default is false.

outside

Examples of incorrect code for the default "outside" option:

/*eslint wrap-iife: ["error", "outside"]*/

var x = function () { return { y: 1 };}(); // unwrapped
var x = (function () { return { y: 1 };})(); // wrapped function expression

Examples of correct code for the default "outside" option:

/*eslint wrap-iife: ["error", "outside"]*/

var x = (function () { return { y: 1 };}()); // wrapped call expression

inside

Examples of incorrect code for the "inside" option:

/*eslint wrap-iife: ["error", "inside"]*/

var x = function () { return { y: 1 };}(); // unwrapped
var x = (function () { return { y: 1 };}()); // wrapped call expression

Examples of correct code for the "inside" option:

/*eslint wrap-iife: ["error", "inside"]*/

var x = (function () { return { y: 1 };})(); // wrapped function expression

any

Examples of incorrect code for the "any" option:

/*eslint wrap-iife: ["error", "any"]*/

var x = function () { return { y: 1 };}(); // unwrapped

Examples of correct code for the "any" option:

/*eslint wrap-iife: ["error", "any"]*/

var x = (function () { return { y: 1 };}()); // wrapped call expression
var x = (function () { return { y: 1 };})(); // wrapped function expression

functionPrototypeMethods

Examples of incorrect code for this rule with the "inside", { "functionPrototypeMethods": true } options:

/* eslint wrap-iife: [2, "inside", { functionPrototypeMethods: true }] */

var x = function(){ foo(); }()
var x = (function(){ foo(); }())
var x = function(){ foo(); }.call(bar)
var x = (function(){ foo(); }.call(bar))

Examples of correct code for this rule with the "inside", { "functionPrototypeMethods": true } options:

/* eslint wrap-iife: [2, "inside", { functionPrototypeMethods: true }] */

var x = (function(){ foo(); })()
var x = (function(){ foo(); }).call(bar)

Source: http://eslint.org/docs/rules/

  belongs_to  :user

Close

Checks that exactly one space is used between a method name and the first argument for method calls without parentheses.

Alternatively, extra spaces can be added to align the argument with something on a preceding or following line, if the AllowForAlignment config parameter is true.

Example:

# bad
something  x
something   y, z
something'hello'

# good
something x
something y, z
something 'hello'

            if (typeof _mouseClick == "function") {

Close

Require === and !== (eqeqeq)

It is considered good practice to use the type-safe equality operators === and !== instead of their regular counterparts == and !=.

The reason for this is that == and != do type coercion which follows the rather obscure Abstract Equality Comparison Algorithm. For instance, the following statements are all considered true:

• [] == false
• [] == ![]
• 3 == "03"

If one of those occurs in an innocent-looking statement such as a == b the actual problem is very difficult to spot.

Rule Details

This rule is aimed at eliminating the type-unsafe equality operators.

Examples of incorrect code for this rule:

/*eslint eqeqeq: "error"*/

if (x == 42) { }

if ("" == text) { }

if (obj.getStuff() != undefined) { }

The --fix option on the command line automatically fixes some problems reported by this rule. A problem is only fixed if one of the operands is a typeof expression, or if both operands are literals with the same type.

Options

always

The "always" option (default) enforces the use of === and !== in every situation (except when you opt-in to more specific handling of null [see below]).

Examples of incorrect code for the "always" option:

/*eslint eqeqeq: ["error", "always"]*/

a == b
foo == true
bananas != 1
value == undefined
typeof foo == 'undefined'
'hello' != 'world'
0 == 0
true == true
foo == null

Examples of correct code for the "always" option:

/*eslint eqeqeq: ["error", "always"]*/

a === b
foo === true
bananas !== 1
value === undefined
typeof foo === 'undefined'
'hello' !== 'world'
0 === 0
true === true
foo === null

This rule optionally takes a second argument, which should be an object with the following supported properties:

• "null": Customize how this rule treats null literals. Possible values:
  • always (default) - Always use === or !==.
  • never - Never use === or !== with null.
  • ignore - Do not apply this rule to null.

smart

The "smart" option enforces the use of === and !== except for these cases:

• Comparing two literal values
• Evaluating the value of typeof
• Comparing against null

Examples of incorrect code for the "smart" option:

/*eslint eqeqeq: ["error", "smart"]*/

// comparing two variables requires ===
a == b

// only one side is a literal
foo == true
bananas != 1

// comparing to undefined requires ===
value == undefined

Examples of correct code for the "smart" option:

/*eslint eqeqeq: ["error", "smart"]*/

typeof foo == 'undefined'
'hello' != 'world'
0 == 0
true == true
foo == null

allow-null

Deprecated: Instead of using this option use "always" and pass a "null" option property with value "ignore". This will tell eslint to always enforce strict equality except when comparing with the null literal.

["error", "always", {"null": "ignore"}]

When Not To Use It

If you don't want to enforce a style for using equality operators, then it's safe to disable this rule. Source: http://eslint.org/docs/rules/

   end

Close

This cop checks whether the end keywords are aligned properly for do end blocks.

Three modes are supported through the EnforcedStyleAlignWith configuration parameter:

start_of_block : the end shall be aligned with the start of the line where the do appeared.

start_of_line : the end shall be aligned with the start of the line where the expression started.

either (which is the default) : the end is allowed to be in either location. The autofixer will default to start_of_line.

Example: EnforcedStyleAlignWith: either (default)

# bad

foo.bar
   .each do
     baz
       end

# good

variable = lambda do |i|
  i
end

Example: EnforcedStyleAlignWith: startofblock

# bad

foo.bar
   .each do
     baz
       end

# good

foo.bar
  .each do
     baz
   end

Example: EnforcedStyleAlignWith: startofline

# bad

foo.bar
   .each do
     baz
       end

# good

foo.bar
  .each do
     baz
end

    user, review, _helpful, _unhelpful = retrieve_both 

Close

This cop checks for underscore-prefixed variables that are actually used.

Example:

# bad

[1, 2, 3].each do |_num|
  do_something(_num)
end

Example:

# good

[1, 2, 3].each do |num|
  do_something(num)
end

Example:

# good

[1, 2, 3].each do |_num|
  do_something # not using `_num`
end

      (e.gsub('*', '%') + '%').gsub(/%+/, '%')

Close

This cop identifies places where gsub can be replaced by tr or delete.

Example:

# bad
'abc'.gsub('b', 'd')
'abc'.gsub('a', '')
'abc'.gsub(/a/, 'd')
'abc'.gsub!('a', 'd')

# good
'abc'.gsub(/.*/, 'a')
'abc'.gsub(/a+/, 'd')
'abc'.tr('b', 'd')
'a b c'.delete(' ')

  def after_sign_in_path_for(resource)

Close

This cop checks for unused method arguments.

Example:

# bad

def some_method(used, unused, _unused_but_allowed)
  puts used
end

Example:

# good

def some_method(used, _unused, _unused_but_allowed)
  puts used
end

  GeolocateMap = (function() {

Close

Require IIFEs to be Wrapped (wrap-iife)

You can immediately invoke function expressions, but not function declarations. A common technique to create an immediately-invoked function expression (IIFE) is to wrap a function declaration in parentheses. The opening parentheses causes the contained function to be parsed as an expression, rather than a declaration.

// function expression could be unwrapped
var x = function () { return { y: 1 };}();

// function declaration must be wrapped
function () { /* side effects */ }(); // SyntaxError

Rule Details

This rule requires all immediately-invoked function expressions to be wrapped in parentheses.

Options

This rule has two options, a string option and an object option.

String option:

• "outside" enforces always wrapping the call expression. The default is "outside".
• "inside" enforces always wrapping the function expression.
• "any" enforces always wrapping, but allows either style.

Object option:

• "functionPrototypeMethods": true additionally enforces wrapping function expressions invoked using .call and .apply. The default is false.

outside

Examples of incorrect code for the default "outside" option:

/*eslint wrap-iife: ["error", "outside"]*/

var x = function () { return { y: 1 };}(); // unwrapped
var x = (function () { return { y: 1 };})(); // wrapped function expression

Examples of correct code for the default "outside" option:

/*eslint wrap-iife: ["error", "outside"]*/

var x = (function () { return { y: 1 };}()); // wrapped call expression

inside

Examples of incorrect code for the "inside" option:

/*eslint wrap-iife: ["error", "inside"]*/

var x = function () { return { y: 1 };}(); // unwrapped
var x = (function () { return { y: 1 };}()); // wrapped call expression

Examples of correct code for the "inside" option:

/*eslint wrap-iife: ["error", "inside"]*/

var x = (function () { return { y: 1 };})(); // wrapped function expression

any

Examples of incorrect code for the "any" option:

/*eslint wrap-iife: ["error", "any"]*/

var x = function () { return { y: 1 };}(); // unwrapped

Examples of correct code for the "any" option:

/*eslint wrap-iife: ["error", "any"]*/

var x = (function () { return { y: 1 };}()); // wrapped call expression
var x = (function () { return { y: 1 };})(); // wrapped function expression

functionPrototypeMethods

Examples of incorrect code for this rule with the "inside", { "functionPrototypeMethods": true } options:

/* eslint wrap-iife: [2, "inside", { functionPrototypeMethods: true }] */

var x = function(){ foo(); }()
var x = (function(){ foo(); }())
var x = function(){ foo(); }.call(bar)
var x = (function(){ foo(); }.call(bar))

Examples of correct code for this rule with the "inside", { "functionPrototypeMethods": true } options:

/* eslint wrap-iife: [2, "inside", { functionPrototypeMethods: true }] */

var x = (function(){ foo(); })()
var x = (function(){ foo(); }).call(bar)

Source: http://eslint.org/docs/rules/

  belongs_to  :clinic

Close

Checks that exactly one space is used between a method name and the first argument for method calls without parentheses.

Alternatively, extra spaces can be added to align the argument with something on a preceding or following line, if the AllowForAlignment config parameter is true.

Example:

# bad
something  x
something   y, z
something'hello'

# good
something x
something y, z
something 'hello'

      user, review, _helpful, _unhelpful = retrieve_both

Close

This cop checks for underscore-prefixed variables that are actually used.

Example:

# bad

[1, 2, 3].each do |_num|
  do_something(_num)
end

Example:

# good

[1, 2, 3].each do |num|
  do_something(num)
end

Example:

# good

[1, 2, 3].each do |_num|
  do_something # not using `_num`
end

    user, review, _helpful, _unhelpful = retrieve_both 

Close

This cop checks for underscore-prefixed variables that are actually used.

Example:

# bad

[1, 2, 3].each do |_num|
  do_something(_num)
end

Example:

# good

[1, 2, 3].each do |num|
  do_something(num)
end

Example:

# good

[1, 2, 3].each do |_num|
  do_something # not using `_num`
end

  Marker = (function() {

Close

Require IIFEs to be Wrapped (wrap-iife)

You can immediately invoke function expressions, but not function declarations. A common technique to create an immediately-invoked function expression (IIFE) is to wrap a function declaration in parentheses. The opening parentheses causes the contained function to be parsed as an expression, rather than a declaration.

// function expression could be unwrapped
var x = function () { return { y: 1 };}();

// function declaration must be wrapped
function () { /* side effects */ }(); // SyntaxError

Rule Details

This rule requires all immediately-invoked function expressions to be wrapped in parentheses.

Options

This rule has two options, a string option and an object option.

String option:

• "outside" enforces always wrapping the call expression. The default is "outside".
• "inside" enforces always wrapping the function expression.
• "any" enforces always wrapping, but allows either style.

Object option:

• "functionPrototypeMethods": true additionally enforces wrapping function expressions invoked using .call and .apply. The default is false.

outside

Examples of incorrect code for the default "outside" option:

/*eslint wrap-iife: ["error", "outside"]*/

var x = function () { return { y: 1 };}(); // unwrapped
var x = (function () { return { y: 1 };})(); // wrapped function expression

Examples of correct code for the default "outside" option:

/*eslint wrap-iife: ["error", "outside"]*/

var x = (function () { return { y: 1 };}()); // wrapped call expression

inside

Examples of incorrect code for the "inside" option:

/*eslint wrap-iife: ["error", "inside"]*/

var x = function () { return { y: 1 };}(); // unwrapped
var x = (function () { return { y: 1 };}()); // wrapped call expression

Examples of correct code for the "inside" option:

/*eslint wrap-iife: ["error", "inside"]*/

var x = (function () { return { y: 1 };})(); // wrapped function expression

any

Examples of incorrect code for the "any" option:

/*eslint wrap-iife: ["error", "any"]*/

var x = function () { return { y: 1 };}(); // unwrapped

Examples of correct code for the "any" option:

/*eslint wrap-iife: ["error", "any"]*/

var x = (function () { return { y: 1 };}()); // wrapped call expression
var x = (function () { return { y: 1 };})(); // wrapped function expression

functionPrototypeMethods

Examples of incorrect code for this rule with the "inside", { "functionPrototypeMethods": true } options:

/* eslint wrap-iife: [2, "inside", { functionPrototypeMethods: true }] */

var x = function(){ foo(); }()
var x = (function(){ foo(); }())
var x = function(){ foo(); }.call(bar)
var x = (function(){ foo(); }.call(bar))

Examples of correct code for this rule with the "inside", { "functionPrototypeMethods": true } options:

/* eslint wrap-iife: [2, "inside", { functionPrototypeMethods: true }] */

var x = (function(){ foo(); })()
var x = (function(){ foo(); }).call(bar)

Source: http://eslint.org/docs/rules/

      user, review, _helpful, _unhelpful = retrieve_both

Close

This cop checks for underscore-prefixed variables that are actually used.

Example:

# bad

[1, 2, 3].each do |_num|
  do_something(_num)
end

Example:

# good

[1, 2, 3].each do |num|
  do_something(num)
end

Example:

# good

[1, 2, 3].each do |_num|
  do_something # not using `_num`
end