Showing 2,019 of 2,019 total issues
Function exports
has a Cognitive Complexity of 18 (exceeds 5 allowed). Consider refactoring. Open
module.exports = function(sequelize, DataTypes) {
var User = sequelize.define('User', {
id: { type: DataTypes.BIGINT, autoIncrement: true, primaryKey: true },
email: { type: DataTypes.STRING, unique: true, allowNull: false },
login: { type: DataTypes.STRING, allowNull: false },
- Read upRead up
Cognitive Complexity
Cognitive Complexity is a measure of how difficult a unit of code is to intuitively understand. Unlike Cyclomatic Complexity, which determines how difficult your code will be to test, Cognitive Complexity tells you how difficult your code will be to read and comprehend.
A method's cognitive complexity is based on a few simple rules:
- Code is not considered more complex when it uses shorthand that the language provides for collapsing multiple statements into one
- Code is considered more complex for each "break in the linear flow of the code"
- Code is considered more complex when "flow breaking structures are nested"
Further reading
Identical blocks of code found in 2 locations. Consider refactoring. Open
return new Promise(function(resolve, reject) {
fs.stat(fullDstPath, function (err) {
if (!err) {
return reject(new Error('Requested file to create already exists: ' + fullDstPath));
} else if (err.code === 'ENOENT') {
- Read upRead up
Duplicated Code
Duplicated code can lead to software that is hard to understand and difficult to change. The Don't Repeat Yourself (DRY) principle states:
Every piece of knowledge must have a single, unambiguous, authoritative representation within a system.
When you violate DRY, bugs and maintenance problems are sure to follow. Duplicated code has a tendency to both continue to replicate and also to diverge (leaving bugs as two similar implementations differ in subtle ways).
Tuning
This issue has a mass of 83.
We set useful threshold defaults for the languages we support but you may want to adjust these settings based on your project guidelines.
The threshold configuration represents the minimum mass a code block must have to be analyzed for duplication. The lower the threshold, the more fine-grained the comparison.
If the engine is too easily reporting duplication, try raising the threshold. If you suspect that the engine isn't catching enough duplication, try lowering the threshold. The best setting tends to differ from language to language.
See codeclimate-duplication
's documentation for more information about tuning the mass threshold in your .codeclimate.yml
.
Refactorings
- Extract Method
- Extract Class
- Form Template Method
- Introduce Null Object
- Pull Up Method
- Pull Up Field
- Substitute Algorithm
Further Reading
- Don't Repeat Yourself on the C2 Wiki
- Duplicated Code on SourceMaking
- Refactoring: Improving the Design of Existing Code by Martin Fowler. Duplicated Code, p76
Identical blocks of code found in 2 locations. Consider refactoring. Open
return Promise.join(new Promise(function(resolve, reject) {
fs.stat(fullDstPath, function (err) {
if (!err) {
return reject(new Error('Requested file to create already exists: ' + fullDstPath));
} else if (err.code === 'ENOENT') {
- Read upRead up
Duplicated Code
Duplicated code can lead to software that is hard to understand and difficult to change. The Don't Repeat Yourself (DRY) principle states:
Every piece of knowledge must have a single, unambiguous, authoritative representation within a system.
When you violate DRY, bugs and maintenance problems are sure to follow. Duplicated code has a tendency to both continue to replicate and also to diverge (leaving bugs as two similar implementations differ in subtle ways).
Tuning
This issue has a mass of 83.
We set useful threshold defaults for the languages we support but you may want to adjust these settings based on your project guidelines.
The threshold configuration represents the minimum mass a code block must have to be analyzed for duplication. The lower the threshold, the more fine-grained the comparison.
If the engine is too easily reporting duplication, try raising the threshold. If you suspect that the engine isn't catching enough duplication, try lowering the threshold. The best setting tends to differ from language to language.
See codeclimate-duplication
's documentation for more information about tuning the mass threshold in your .codeclimate.yml
.
Refactorings
- Extract Method
- Extract Class
- Form Template Method
- Introduce Null Object
- Pull Up Method
- Pull Up Field
- Substitute Algorithm
Further Reading
- Don't Repeat Yourself on the C2 Wiki
- Duplicated Code on SourceMaking
- Refactoring: Improving the Design of Existing Code by Martin Fowler. Duplicated Code, p76
Function has too many statements (36). Maximum allowed is 30. Open
return promise.then(function(answers) {
- Read upRead up
- Exclude checks
enforce a maximum number of statements allowed in function blocks (max-statements)
The max-statements
rule allows you to specify the maximum number of statements allowed in a function.
function foo() {
var bar = 1; // one statement
var baz = 2; // two statements
var qux = 3; // three statements
}
Rule Details
This rule enforces a maximum number of statements allowed in function blocks.
Options
This rule has a number or object option:
-
"max"
(default10
) enforces a maximum number of statements allows in function blocks
Deprecated: The object property maximum
is deprecated; please use the object property max
instead.
This rule has an object option:
-
"ignoreTopLevelFunctions": true
ignores top-level functions
max
Examples of incorrect code for this rule with the default { "max": 10 }
option:
/*eslint max-statements: ["error", 10]*/
/*eslint-env es6*/
function foo() {
var foo1 = 1;
var foo2 = 2;
var foo3 = 3;
var foo4 = 4;
var foo5 = 5;
var foo6 = 6;
var foo7 = 7;
var foo8 = 8;
var foo9 = 9;
var foo10 = 10;
var foo11 = 11; // Too many.
}
let foo = () => {
var foo1 = 1;
var foo2 = 2;
var foo3 = 3;
var foo4 = 4;
var foo5 = 5;
var foo6 = 6;
var foo7 = 7;
var foo8 = 8;
var foo9 = 9;
var foo10 = 10;
var foo11 = 11; // Too many.
};
Examples of correct code for this rule with the default { "max": 10 }
option:
/*eslint max-statements: ["error", 10]*/
/*eslint-env es6*/
function foo() {
var foo1 = 1;
var foo2 = 2;
var foo3 = 3;
var foo4 = 4;
var foo5 = 5;
var foo6 = 6;
var foo7 = 7;
var foo8 = 8;
var foo9 = 9;
var foo10 = 10;
return function () {
// The number of statements in the inner function does not count toward the
// statement maximum.
return 42;
};
}
let foo = () => {
var foo1 = 1;
var foo2 = 2;
var foo3 = 3;
var foo4 = 4;
var foo5 = 5;
var foo6 = 6;
var foo7 = 7;
var foo8 = 8;
var foo9 = 9;
var foo10 = 10;
return function () {
// The number of statements in the inner function does not count toward the
// statement maximum.
return 42;
};
}
ignoreTopLevelFunctions
Examples of additional correct code for this rule with the { "max": 10 }, { "ignoreTopLevelFunctions": true }
options:
/*eslint max-statements: ["error", 10, { "ignoreTopLevelFunctions": true }]*/
function foo() {
var foo1 = 1;
var foo2 = 2;
var foo3 = 3;
var foo4 = 4;
var foo5 = 5;
var foo6 = 6;
var foo7 = 7;
var foo8 = 8;
var foo9 = 9;
var foo10 = 10;
var foo11 = 11;
}
Related Rules
- [complexity](complexity.md)
- [max-depth](max-depth.md)
- [max-len](max-len.md)
- [max-nested-callbacks](max-nested-callbacks.md)
- [max-params](max-params.md) Source: http://eslint.org/docs/rules/
Function parseQuestionsfromPost
has 58 lines of code (exceeds 25 allowed). Consider refactoring. Open
function parseQuestionsfromPost(req, survey) {
var questions = [];
for (var i = 1;;i++) {
if (!((('question_type_' + i) in req.body) && (('question_' + i) in req.body))) {
break;
Function facebookAuth
has 57 lines of code (exceeds 25 allowed). Consider refactoring. Open
function facebookAuth (req, profile, token) {
var usr;
return models.User.findOne({ where: { 'facebook_id' : profile.id } }).then(function(user) {
if (user === null) {
if (!('emails' in profile) || profile.emails.length === 0) {
Similar blocks of code found in 4 locations. Consider refactoring. Open
if (err && err.name === 'SequelizeUniqueConstraintError' &&
((err.errors && err.errors.constructor === Array && err.errors[0].path === 'email') ||
(err.message.indexOf('users_email_key') > -1))) {
req.session.error = 'email_duplicated_error_msg';
logger.debug('E-mail already exists: ' + err);
- Read upRead up
Duplicated Code
Duplicated code can lead to software that is hard to understand and difficult to change. The Don't Repeat Yourself (DRY) principle states:
Every piece of knowledge must have a single, unambiguous, authoritative representation within a system.
When you violate DRY, bugs and maintenance problems are sure to follow. Duplicated code has a tendency to both continue to replicate and also to diverge (leaving bugs as two similar implementations differ in subtle ways).
Tuning
This issue has a mass of 80.
We set useful threshold defaults for the languages we support but you may want to adjust these settings based on your project guidelines.
The threshold configuration represents the minimum mass a code block must have to be analyzed for duplication. The lower the threshold, the more fine-grained the comparison.
If the engine is too easily reporting duplication, try raising the threshold. If you suspect that the engine isn't catching enough duplication, try lowering the threshold. The best setting tends to differ from language to language.
See codeclimate-duplication
's documentation for more information about tuning the mass threshold in your .codeclimate.yml
.
Refactorings
- Extract Method
- Extract Class
- Form Template Method
- Introduce Null Object
- Pull Up Method
- Pull Up Field
- Substitute Algorithm
Further Reading
- Don't Repeat Yourself on the C2 Wiki
- Duplicated Code on SourceMaking
- Refactoring: Improving the Design of Existing Code by Martin Fowler. Duplicated Code, p76
Similar blocks of code found in 4 locations. Consider refactoring. Open
if (err && err.name === 'SequelizeUniqueConstraintError' &&
((err.errors && err.errors.constructor === Array && err.errors[0].path === 'login') ||
(err.message.indexOf('users_login_key') > -1))) {
req.session.error = 'username_duplicated_error_msg';
logger.debug('Login already in use: ' + err);
- Read upRead up
Duplicated Code
Duplicated code can lead to software that is hard to understand and difficult to change. The Don't Repeat Yourself (DRY) principle states:
Every piece of knowledge must have a single, unambiguous, authoritative representation within a system.
When you violate DRY, bugs and maintenance problems are sure to follow. Duplicated code has a tendency to both continue to replicate and also to diverge (leaving bugs as two similar implementations differ in subtle ways).
Tuning
This issue has a mass of 80.
We set useful threshold defaults for the languages we support but you may want to adjust these settings based on your project guidelines.
The threshold configuration represents the minimum mass a code block must have to be analyzed for duplication. The lower the threshold, the more fine-grained the comparison.
If the engine is too easily reporting duplication, try raising the threshold. If you suspect that the engine isn't catching enough duplication, try lowering the threshold. The best setting tends to differ from language to language.
See codeclimate-duplication
's documentation for more information about tuning the mass threshold in your .codeclimate.yml
.
Refactorings
- Extract Method
- Extract Class
- Form Template Method
- Introduce Null Object
- Pull Up Method
- Pull Up Field
- Substitute Algorithm
Further Reading
- Don't Repeat Yourself on the C2 Wiki
- Duplicated Code on SourceMaking
- Refactoring: Improving the Design of Existing Code by Martin Fowler. Duplicated Code, p76
Similar blocks of code found in 4 locations. Consider refactoring. Open
} else if (err && err.name === 'SequelizeUniqueConstraintError' &&
((err.errors && err.errors.constructor === Array && err.errors[0].path === 'login') ||
(err.message.indexOf('users_login_key') > -1))) {
req.session.error = 'username_duplicated_error_msg';
logger.debug('Login already in use: ' + err);
- Read upRead up
Duplicated Code
Duplicated code can lead to software that is hard to understand and difficult to change. The Don't Repeat Yourself (DRY) principle states:
Every piece of knowledge must have a single, unambiguous, authoritative representation within a system.
When you violate DRY, bugs and maintenance problems are sure to follow. Duplicated code has a tendency to both continue to replicate and also to diverge (leaving bugs as two similar implementations differ in subtle ways).
Tuning
This issue has a mass of 80.
We set useful threshold defaults for the languages we support but you may want to adjust these settings based on your project guidelines.
The threshold configuration represents the minimum mass a code block must have to be analyzed for duplication. The lower the threshold, the more fine-grained the comparison.
If the engine is too easily reporting duplication, try raising the threshold. If you suspect that the engine isn't catching enough duplication, try lowering the threshold. The best setting tends to differ from language to language.
See codeclimate-duplication
's documentation for more information about tuning the mass threshold in your .codeclimate.yml
.
Refactorings
- Extract Method
- Extract Class
- Form Template Method
- Introduce Null Object
- Pull Up Method
- Pull Up Field
- Substitute Algorithm
Further Reading
- Don't Repeat Yourself on the C2 Wiki
- Duplicated Code on SourceMaking
- Refactoring: Improving the Design of Existing Code by Martin Fowler. Duplicated Code, p76
Similar blocks of code found in 4 locations. Consider refactoring. Open
if (err && err.name === 'SequelizeUniqueConstraintError' &&
((err.errors && err.errors.constructor === Array && err.errors[0].path === 'login') ||
(err.message.indexOf('users_login_key') > -1))) {
user.login = originalLogin;
return nextLoginUserSignup(user, tryNr + 1);
- Read upRead up
Duplicated Code
Duplicated code can lead to software that is hard to understand and difficult to change. The Don't Repeat Yourself (DRY) principle states:
Every piece of knowledge must have a single, unambiguous, authoritative representation within a system.
When you violate DRY, bugs and maintenance problems are sure to follow. Duplicated code has a tendency to both continue to replicate and also to diverge (leaving bugs as two similar implementations differ in subtle ways).
Tuning
This issue has a mass of 80.
We set useful threshold defaults for the languages we support but you may want to adjust these settings based on your project guidelines.
The threshold configuration represents the minimum mass a code block must have to be analyzed for duplication. The lower the threshold, the more fine-grained the comparison.
If the engine is too easily reporting duplication, try raising the threshold. If you suspect that the engine isn't catching enough duplication, try lowering the threshold. The best setting tends to differ from language to language.
See codeclimate-duplication
's documentation for more information about tuning the mass threshold in your .codeclimate.yml
.
Refactorings
- Extract Method
- Extract Class
- Form Template Method
- Introduce Null Object
- Pull Up Method
- Pull Up Field
- Substitute Algorithm
Further Reading
- Don't Repeat Yourself on the C2 Wiki
- Duplicated Code on SourceMaking
- Refactoring: Improving the Design of Existing Code by Martin Fowler. Duplicated Code, p76
Function parseAnswersFromPost
has 55 lines of code (exceeds 25 allowed). Consider refactoring. Open
function parseAnswersFromPost(req, questions, oldAnswers) {
var answers = [];
oldAnswers = oldAnswers || null;
for (var i = 1, iLen = questions.length; i<=iLen; i++) {
var question = questions[i-1];
Function has too many statements (34). Maximum allowed is 30. Open
app.post('/profile', function(req, res) {
- Read upRead up
- Exclude checks
enforce a maximum number of statements allowed in function blocks (max-statements)
The max-statements
rule allows you to specify the maximum number of statements allowed in a function.
function foo() {
var bar = 1; // one statement
var baz = 2; // two statements
var qux = 3; // three statements
}
Rule Details
This rule enforces a maximum number of statements allowed in function blocks.
Options
This rule has a number or object option:
-
"max"
(default10
) enforces a maximum number of statements allows in function blocks
Deprecated: The object property maximum
is deprecated; please use the object property max
instead.
This rule has an object option:
-
"ignoreTopLevelFunctions": true
ignores top-level functions
max
Examples of incorrect code for this rule with the default { "max": 10 }
option:
/*eslint max-statements: ["error", 10]*/
/*eslint-env es6*/
function foo() {
var foo1 = 1;
var foo2 = 2;
var foo3 = 3;
var foo4 = 4;
var foo5 = 5;
var foo6 = 6;
var foo7 = 7;
var foo8 = 8;
var foo9 = 9;
var foo10 = 10;
var foo11 = 11; // Too many.
}
let foo = () => {
var foo1 = 1;
var foo2 = 2;
var foo3 = 3;
var foo4 = 4;
var foo5 = 5;
var foo6 = 6;
var foo7 = 7;
var foo8 = 8;
var foo9 = 9;
var foo10 = 10;
var foo11 = 11; // Too many.
};
Examples of correct code for this rule with the default { "max": 10 }
option:
/*eslint max-statements: ["error", 10]*/
/*eslint-env es6*/
function foo() {
var foo1 = 1;
var foo2 = 2;
var foo3 = 3;
var foo4 = 4;
var foo5 = 5;
var foo6 = 6;
var foo7 = 7;
var foo8 = 8;
var foo9 = 9;
var foo10 = 10;
return function () {
// The number of statements in the inner function does not count toward the
// statement maximum.
return 42;
};
}
let foo = () => {
var foo1 = 1;
var foo2 = 2;
var foo3 = 3;
var foo4 = 4;
var foo5 = 5;
var foo6 = 6;
var foo7 = 7;
var foo8 = 8;
var foo9 = 9;
var foo10 = 10;
return function () {
// The number of statements in the inner function does not count toward the
// statement maximum.
return 42;
};
}
ignoreTopLevelFunctions
Examples of additional correct code for this rule with the { "max": 10 }, { "ignoreTopLevelFunctions": true }
options:
/*eslint max-statements: ["error", 10, { "ignoreTopLevelFunctions": true }]*/
function foo() {
var foo1 = 1;
var foo2 = 2;
var foo3 = 3;
var foo4 = 4;
var foo5 = 5;
var foo6 = 6;
var foo7 = 7;
var foo8 = 8;
var foo9 = 9;
var foo10 = 10;
var foo11 = 11;
}
Related Rules
- [complexity](complexity.md)
- [max-depth](max-depth.md)
- [max-len](max-len.md)
- [max-nested-callbacks](max-nested-callbacks.md)
- [max-params](max-params.md) Source: http://eslint.org/docs/rules/
Identical blocks of code found in 3 locations. Consider refactoring. Open
headerStyle = wb.createStyle({
font: {
color: '#000000',
size: 11,
bold: true
- Read upRead up
Duplicated Code
Duplicated code can lead to software that is hard to understand and difficult to change. The Don't Repeat Yourself (DRY) principle states:
Every piece of knowledge must have a single, unambiguous, authoritative representation within a system.
When you violate DRY, bugs and maintenance problems are sure to follow. Duplicated code has a tendency to both continue to replicate and also to diverge (leaving bugs as two similar implementations differ in subtle ways).
Tuning
This issue has a mass of 77.
We set useful threshold defaults for the languages we support but you may want to adjust these settings based on your project guidelines.
The threshold configuration represents the minimum mass a code block must have to be analyzed for duplication. The lower the threshold, the more fine-grained the comparison.
If the engine is too easily reporting duplication, try raising the threshold. If you suspect that the engine isn't catching enough duplication, try lowering the threshold. The best setting tends to differ from language to language.
See codeclimate-duplication
's documentation for more information about tuning the mass threshold in your .codeclimate.yml
.
Refactorings
- Extract Method
- Extract Class
- Form Template Method
- Introduce Null Object
- Pull Up Method
- Pull Up Field
- Substitute Algorithm
Further Reading
- Don't Repeat Yourself on the C2 Wiki
- Duplicated Code on SourceMaking
- Refactoring: Improving the Design of Existing Code by Martin Fowler. Duplicated Code, p76
Identical blocks of code found in 3 locations. Consider refactoring. Open
headerStyle = wb.createStyle({
font: {
color: '#000000',
size: 11,
bold: true
- Read upRead up
Duplicated Code
Duplicated code can lead to software that is hard to understand and difficult to change. The Don't Repeat Yourself (DRY) principle states:
Every piece of knowledge must have a single, unambiguous, authoritative representation within a system.
When you violate DRY, bugs and maintenance problems are sure to follow. Duplicated code has a tendency to both continue to replicate and also to diverge (leaving bugs as two similar implementations differ in subtle ways).
Tuning
This issue has a mass of 77.
We set useful threshold defaults for the languages we support but you may want to adjust these settings based on your project guidelines.
The threshold configuration represents the minimum mass a code block must have to be analyzed for duplication. The lower the threshold, the more fine-grained the comparison.
If the engine is too easily reporting duplication, try raising the threshold. If you suspect that the engine isn't catching enough duplication, try lowering the threshold. The best setting tends to differ from language to language.
See codeclimate-duplication
's documentation for more information about tuning the mass threshold in your .codeclimate.yml
.
Refactorings
- Extract Method
- Extract Class
- Form Template Method
- Introduce Null Object
- Pull Up Method
- Pull Up Field
- Substitute Algorithm
Further Reading
- Don't Repeat Yourself on the C2 Wiki
- Duplicated Code on SourceMaking
- Refactoring: Improving the Design of Existing Code by Martin Fowler. Duplicated Code, p76
Identical blocks of code found in 3 locations. Consider refactoring. Open
headerStyle = wb.createStyle({
font: {
color: '#000000',
size: 11,
bold: true
- Read upRead up
Duplicated Code
Duplicated code can lead to software that is hard to understand and difficult to change. The Don't Repeat Yourself (DRY) principle states:
Every piece of knowledge must have a single, unambiguous, authoritative representation within a system.
When you violate DRY, bugs and maintenance problems are sure to follow. Duplicated code has a tendency to both continue to replicate and also to diverge (leaving bugs as two similar implementations differ in subtle ways).
Tuning
This issue has a mass of 77.
We set useful threshold defaults for the languages we support but you may want to adjust these settings based on your project guidelines.
The threshold configuration represents the minimum mass a code block must have to be analyzed for duplication. The lower the threshold, the more fine-grained the comparison.
If the engine is too easily reporting duplication, try raising the threshold. If you suspect that the engine isn't catching enough duplication, try lowering the threshold. The best setting tends to differ from language to language.
See codeclimate-duplication
's documentation for more information about tuning the mass threshold in your .codeclimate.yml
.
Refactorings
- Extract Method
- Extract Class
- Form Template Method
- Introduce Null Object
- Pull Up Method
- Pull Up Field
- Substitute Algorithm
Further Reading
- Don't Repeat Yourself on the C2 Wiki
- Duplicated Code on SourceMaking
- Refactoring: Improving the Design of Existing Code by Martin Fowler. Duplicated Code, p76
Function 'addQuestionStatsXlsxSheet' has too many statements (33). Maximum allowed is 30. Open
function addQuestionStatsXlsxSheet(wb, questions, results, i18n) {
- Read upRead up
- Exclude checks
enforce a maximum number of statements allowed in function blocks (max-statements)
The max-statements
rule allows you to specify the maximum number of statements allowed in a function.
function foo() {
var bar = 1; // one statement
var baz = 2; // two statements
var qux = 3; // three statements
}
Rule Details
This rule enforces a maximum number of statements allowed in function blocks.
Options
This rule has a number or object option:
-
"max"
(default10
) enforces a maximum number of statements allows in function blocks
Deprecated: The object property maximum
is deprecated; please use the object property max
instead.
This rule has an object option:
-
"ignoreTopLevelFunctions": true
ignores top-level functions
max
Examples of incorrect code for this rule with the default { "max": 10 }
option:
/*eslint max-statements: ["error", 10]*/
/*eslint-env es6*/
function foo() {
var foo1 = 1;
var foo2 = 2;
var foo3 = 3;
var foo4 = 4;
var foo5 = 5;
var foo6 = 6;
var foo7 = 7;
var foo8 = 8;
var foo9 = 9;
var foo10 = 10;
var foo11 = 11; // Too many.
}
let foo = () => {
var foo1 = 1;
var foo2 = 2;
var foo3 = 3;
var foo4 = 4;
var foo5 = 5;
var foo6 = 6;
var foo7 = 7;
var foo8 = 8;
var foo9 = 9;
var foo10 = 10;
var foo11 = 11; // Too many.
};
Examples of correct code for this rule with the default { "max": 10 }
option:
/*eslint max-statements: ["error", 10]*/
/*eslint-env es6*/
function foo() {
var foo1 = 1;
var foo2 = 2;
var foo3 = 3;
var foo4 = 4;
var foo5 = 5;
var foo6 = 6;
var foo7 = 7;
var foo8 = 8;
var foo9 = 9;
var foo10 = 10;
return function () {
// The number of statements in the inner function does not count toward the
// statement maximum.
return 42;
};
}
let foo = () => {
var foo1 = 1;
var foo2 = 2;
var foo3 = 3;
var foo4 = 4;
var foo5 = 5;
var foo6 = 6;
var foo7 = 7;
var foo8 = 8;
var foo9 = 9;
var foo10 = 10;
return function () {
// The number of statements in the inner function does not count toward the
// statement maximum.
return 42;
};
}
ignoreTopLevelFunctions
Examples of additional correct code for this rule with the { "max": 10 }, { "ignoreTopLevelFunctions": true }
options:
/*eslint max-statements: ["error", 10, { "ignoreTopLevelFunctions": true }]*/
function foo() {
var foo1 = 1;
var foo2 = 2;
var foo3 = 3;
var foo4 = 4;
var foo5 = 5;
var foo6 = 6;
var foo7 = 7;
var foo8 = 8;
var foo9 = 9;
var foo10 = 10;
var foo11 = 11;
}
Related Rules
- [complexity](complexity.md)
- [max-depth](max-depth.md)
- [max-len](max-len.md)
- [max-nested-callbacks](max-nested-callbacks.md)
- [max-params](max-params.md) Source: http://eslint.org/docs/rules/
Function saveFileFromPath
has 50 lines of code (exceeds 25 allowed). Consider refactoring. Open
saveFileFromPath: function(srcPath, dstPath, fileName, defaultMime) {
var cleanDstPath = dstPath;
while(cleanDstPath.charAt(0) === path.sep) {
cleanDstPath = cleanDstPath.substr(1);
}
Function googleAuth
has 50 lines of code (exceeds 25 allowed). Consider refactoring. Open
function googleAuth (req, profile, token) {
var usr;
return models.User.findOne({ where: { 'google_id' : profile.id } }).then(function(user) {
if (user === null) {
// If we don't find it by google id, we try by email
Function saveFileFromBuffer
has 47 lines of code (exceeds 25 allowed). Consider refactoring. Open
saveFileFromBuffer: function(buffer, dstPath, fileName, defaultMime) {
var cleanDstPath = dstPath;
while(cleanDstPath.charAt(0) === path.sep) {
cleanDstPath = cleanDstPath.substr(1);
}
Function getAnsweredSurveysWithAllDates
has 46 lines of code (exceeds 25 allowed). Consider refactoring. Open
User.prototype.getAnsweredSurveysWithAllDates = function() {
var userId = this.id;
return Promise.reduce(this.getVotes({
include: [
{