Blank line inside blockquote Open
- Read upRead up
- Exclude checks
MD028 - Blank line inside blockquote
Tags: blockquote, whitespace
Aliases: no-blanks-blockquote
This rule is triggered when two blockquote blocks are separated by nothing except for a blank line:
> This is a blockquote
> which is immediately followed by
> this blockquote. Unfortunately
> In some parsers, these are treated as the same blockquote.
To fix this, ensure that any blockquotes that are right next to each other have some text in between:
> This is a blockquote.
And Jimmy also said:
> This too is a blockquote.
Alternatively, if they are supposed to be the same quote, then add the blockquote symbol at the beginning of the blank line:
> This is a blockquote.
>
> This is the same blockquote.
Rationale: Some markdown parsers will treat two blockquotes separated by one or more blank lines as the same blockquote, while others will treat them as separate blockquotes.
Ordered list item prefix Open
3. The page now shows advanced configuration for the integration. The most
- Read upRead up
- Exclude checks
MD029 - Ordered list item prefix
Tags: ol
Aliases: ol-prefix
Parameters: style ("one", "ordered"; default "one")
This rule is triggered on ordered lists that do not either start with '1.' or do not have a prefix that increases in numerical order (depending on the configured style, which defaults to 'one').
Example valid list if the style is configured as 'one':
1. Do this.
1. Do that.
1. Done.
Example valid list if the style is configured as 'ordered':
1. Do this.
2. Do that.
3. Done.
Spaces after list markers Open
1. Define the `EHIVE_SLACK_WEBHOOK` environment variable when running your
- Read upRead up
- Exclude checks
MD030 - Spaces after list markers
Tags: ol, ul, whitespace
Aliases: list-marker-space
Parameters: ulsingle, olsingle, ulmulti, olmulti (number, default 1)
This rule checks for the number of spaces between a list marker (e.g. '-
',
'*
', '+
' or '1.
') and the text of the list item.
The number of spaces checked for depends on the document style in use, but the default is 1 space after any list marker:
* Foo
* Bar
* Baz
1. Foo
1. Bar
1. Baz
1. Foo
* Bar
1. Baz
A document style may change the number of spaces after unordered list items and ordered list items independently, as well as based on whether the content of every item in the list consists of a single paragraph, or multiple paragraphs (including sub-lists and code blocks).
For example, the style guide at http://www.cirosantilli.com/markdown-styleguide/#spaces-after-marker specifies that 1 space after the list marker should be used if every item in the list fits within a single paragraph, but to use 2 or 3 spaces (for ordered and unordered lists respectively) if there are multiple paragraphs of content inside the list:
* Foo
* Bar
* Baz
vs.
* Foo
Second paragraph
* Bar
or
1. Foo
Second paragraph
1. Bar
To fix this, ensure the correct number of spaces are used after list marker for your selected document style.
Lists should be surrounded by blank lines Open
3. You should be on a page that gives an introduction about WebHooks and
- Read upRead up
- Exclude checks
MD032 - Lists should be surrounded by blank lines
Tags: bullet, ul, ol, blank_lines
Aliases: blanks-around-lists
This rule is triggered when lists (of any kind) are either not preceded or not followed by a blank line:
Some text
* Some
* List
1. Some
2. List
Some text
To fix this, ensure that all lists have a blank line both before and after (except where the block is at the beginning or end of the document):
Some text
* Some
* List
1. Some
2. List
Some text
Rationale: Aside from aesthetic reasons, some parsers, including kramdown, will not parse lists that don't have blank lines before and after them.
Note: List items without hanging indents are a violation of this rule; list items with hanging indents are okay:
* This is
not okay
* This is
okay
Lists should be surrounded by blank lines Open
1. You first need to choose the channel eHive will write too. Although
- Read upRead up
- Exclude checks
MD032 - Lists should be surrounded by blank lines
Tags: bullet, ul, ol, blank_lines
Aliases: blanks-around-lists
This rule is triggered when lists (of any kind) are either not preceded or not followed by a blank line:
Some text
* Some
* List
1. Some
2. List
Some text
To fix this, ensure that all lists have a blank line both before and after (except where the block is at the beginning or end of the document):
Some text
* Some
* List
1. Some
2. List
Some text
Rationale: Aside from aesthetic reasons, some parsers, including kramdown, will not parse lists that don't have blank lines before and after them.
Note: List items without hanging indents are a violation of this rule; list items with hanging indents are okay:
* This is
not okay
* This is
okay
Ordered list item prefix Open
2. Click "Add Incoming WebHooks Integration"
- Read upRead up
- Exclude checks
MD029 - Ordered list item prefix
Tags: ol
Aliases: ol-prefix
Parameters: style ("one", "ordered"; default "one")
This rule is triggered on ordered lists that do not either start with '1.' or do not have a prefix that increases in numerical order (depending on the configured style, which defaults to 'one').
Example valid list if the style is configured as 'one':
1. Do this.
1. Do that.
1. Done.
Example valid list if the style is configured as 'ordered':
1. Do this.
2. Do that.
3. Done.
Ordered list item prefix Open
3. Use the WebHook in eHive
- Read upRead up
- Exclude checks
MD029 - Ordered list item prefix
Tags: ol
Aliases: ol-prefix
Parameters: style ("one", "ordered"; default "one")
This rule is triggered on ordered lists that do not either start with '1.' or do not have a prefix that increases in numerical order (depending on the configured style, which defaults to 'one').
Example valid list if the style is configured as 'one':
1. Do this.
1. Do that.
1. Done.
Example valid list if the style is configured as 'ordered':
1. Do this.
2. Do that.
3. Done.
Ordered list item prefix Open
2. Let's now configure a webhook to use with eHive
- Read upRead up
- Exclude checks
MD029 - Ordered list item prefix
Tags: ol
Aliases: ol-prefix
Parameters: style ("one", "ordered"; default "one")
This rule is triggered on ordered lists that do not either start with '1.' or do not have a prefix that increases in numerical order (depending on the configured style, which defaults to 'one').
Example valid list if the style is configured as 'one':
1. Do this.
1. Do that.
1. Done.
Example valid list if the style is configured as 'ordered':
1. Do this.
2. Do that.
3. Done.
Ordered list item prefix Open
3. You should be on a page that gives an introduction about WebHooks and
- Read upRead up
- Exclude checks
MD029 - Ordered list item prefix
Tags: ol
Aliases: ol-prefix
Parameters: style ("one", "ordered"; default "one")
This rule is triggered on ordered lists that do not either start with '1.' or do not have a prefix that increases in numerical order (depending on the configured style, which defaults to 'one').
Example valid list if the style is configured as 'one':
1. Do this.
1. Do that.
1. Done.
Example valid list if the style is configured as 'ordered':
1. Do this.
2. Do that.
3. Done.
Ordered list item prefix Open
4. If you scroll down to "Integration Settings" you can give a description
- Read upRead up
- Exclude checks
MD029 - Ordered list item prefix
Tags: ol
Aliases: ol-prefix
Parameters: style ("one", "ordered"; default "one")
This rule is triggered on ordered lists that do not either start with '1.' or do not have a prefix that increases in numerical order (depending on the configured style, which defaults to 'one').
Example valid list if the style is configured as 'one':
1. Do this.
1. Do that.
1. Done.
Example valid list if the style is configured as 'ordered':
1. Do this.
2. Do that.
3. Done.
Ordered list item prefix Open
2. Configure the `slack_webhook` parameter in the SlackNotification Runnable
- Read upRead up
- Exclude checks
MD029 - Ordered list item prefix
Tags: ol
Aliases: ol-prefix
Parameters: style ("one", "ordered"; default "one")
This rule is triggered on ordered lists that do not either start with '1.' or do not have a prefix that increases in numerical order (depending on the configured style, which defaults to 'one').
Example valid list if the style is configured as 'one':
1. Do this.
1. Do that.
1. Done.
Example valid list if the style is configured as 'ordered':
1. Do this.
2. Do that.
3. Done.
Lists should be surrounded by blank lines Open
3. The page now shows advanced configuration for the integration. The most
- Read upRead up
- Exclude checks
MD032 - Lists should be surrounded by blank lines
Tags: bullet, ul, ol, blank_lines
Aliases: blanks-around-lists
This rule is triggered when lists (of any kind) are either not preceded or not followed by a blank line:
Some text
* Some
* List
1. Some
2. List
Some text
To fix this, ensure that all lists have a blank line both before and after (except where the block is at the beginning or end of the document):
Some text
* Some
* List
1. Some
2. List
Some text
Rationale: Aside from aesthetic reasons, some parsers, including kramdown, will not parse lists that don't have blank lines before and after them.
Note: List items without hanging indents are a violation of this rule; list items with hanging indents are okay:
* This is
not okay
* This is
okay
Ordered list item prefix Open
2. Otherwise, click on the "Install" button next to your team name
- Read upRead up
- Exclude checks
MD029 - Ordered list item prefix
Tags: ol
Aliases: ol-prefix
Parameters: style ("one", "ordered"; default "one")
This rule is triggered on ordered lists that do not either start with '1.' or do not have a prefix that increases in numerical order (depending on the configured style, which defaults to 'one').
Example valid list if the style is configured as 'one':
1. Do this.
1. Do that.
1. Done.
Example valid list if the style is configured as 'ordered':
1. Do this.
2. Do that.
3. Done.
Lists should be surrounded by blank lines Open
4. If you scroll down to "Integration Settings" you can give a description
- Read upRead up
- Exclude checks
MD032 - Lists should be surrounded by blank lines
Tags: bullet, ul, ol, blank_lines
Aliases: blanks-around-lists
This rule is triggered when lists (of any kind) are either not preceded or not followed by a blank line:
Some text
* Some
* List
1. Some
2. List
Some text
To fix this, ensure that all lists have a blank line both before and after (except where the block is at the beginning or end of the document):
Some text
* Some
* List
1. Some
2. List
Some text
Rationale: Aside from aesthetic reasons, some parsers, including kramdown, will not parse lists that don't have blank lines before and after them.
Note: List items without hanging indents are a violation of this rule; list items with hanging indents are okay:
* This is
not okay
* This is
okay
Ordered list item prefix Open
2. Find "Incoming WebHooks" via the search box and select it
- Read upRead up
- Exclude checks
MD029 - Ordered list item prefix
Tags: ol
Aliases: ol-prefix
Parameters: style ("one", "ordered"; default "one")
This rule is triggered on ordered lists that do not either start with '1.' or do not have a prefix that increases in numerical order (depending on the configured style, which defaults to 'one').
Example valid list if the style is configured as 'one':
1. Do this.
1. Do that.
1. Done.
Example valid list if the style is configured as 'ordered':
1. Do this.
2. Do that.
3. Done.