Sign upLogin

FNNDSC/ami

View on GitHub
Star

Showing 390 of 665 total issues

Similar blocks of code found in 2 locations. Consider refactoring.
Open

    } else if (this._header.ElementType === 'MET_SHORT') {
      frameOffset = frameOffset * 2;
      return new Int16Array(buffer, frameOffset, numPixels);
    } else if (this._header.ElementType === 'MET_USHORT') {
      frameOffset = frameOffset * 2;
Severity: Major
Found in src/parsers/parsers.mhd.js and 1 other location - About 6 hrs to fix
src/parsers/parsers.nrrd.js on lines 278..293

Duplicated Code

Duplicated code can lead to software that is hard to understand and difficult to change. The Don't Repeat Yourself (DRY) principle states:

Every piece of knowledge must have a single, unambiguous, authoritative representation within a system.

When you violate DRY, bugs and maintenance problems are sure to follow. Duplicated code has a tendency to both continue to replicate and also to diverge (leaving bugs as two similar implementations differ in subtle ways).

Tuning

This issue has a mass of 160.

We set useful threshold defaults for the languages we support but you may want to adjust these settings based on your project guidelines.

The threshold configuration represents the minimum mass a code block must have to be analyzed for duplication. The lower the threshold, the more fine-grained the comparison.

If the engine is too easily reporting duplication, try raising the threshold. If you suspect that the engine isn't catching enough duplication, try lowering the threshold. The best setting tends to differ from language to language.

See codeclimate-duplication's documentation for more information about tuning the mass threshold in your .codeclimate.yml.

Refactorings

Further Reading

Similar blocks of code found in 2 locations. Consider refactoring.
Open

    } else if (this._dataSet.type === 'int16' || this._dataSet.type === 'short') {
      frameOffset = frameOffset * 2;
      return new Int16Array(buffer, frameOffset, numPixels);
    } else if (this._dataSet.type === 'uint16') {
      frameOffset = frameOffset * 2;
Severity: Major
Found in src/parsers/parsers.nrrd.js and 1 other location - About 6 hrs to fix
src/parsers/parsers.mhd.js on lines 172..187

Duplicated Code

Duplicated code can lead to software that is hard to understand and difficult to change. The Don't Repeat Yourself (DRY) principle states:

Every piece of knowledge must have a single, unambiguous, authoritative representation within a system.

When you violate DRY, bugs and maintenance problems are sure to follow. Duplicated code has a tendency to both continue to replicate and also to diverge (leaving bugs as two similar implementations differ in subtle ways).

Tuning

This issue has a mass of 160.

We set useful threshold defaults for the languages we support but you may want to adjust these settings based on your project guidelines.

The threshold configuration represents the minimum mass a code block must have to be analyzed for duplication. The lower the threshold, the more fine-grained the comparison.

If the engine is too easily reporting duplication, try raising the threshold. If you suspect that the engine isn't catching enough duplication, try lowering the threshold. The best setting tends to differ from language to language.

See codeclimate-duplication's documentation for more information about tuning the mass threshold in your .codeclimate.yml.

Refactorings

Further Reading

Identical blocks of code found in 3 locations. Consider refactoring.
Open

      if (this._active) {
        const prevPosition = this._moveHandle.worldPosition.clone();

        this._dragged = true;
        this._moveHandle.onMove(evt, true);
Severity: Major
Found in src/widgets/widgets.crossRuler.js and 2 other locations - About 6 hrs to fix
src/widgets/widgets.angle.js on lines 132..145
src/widgets/widgets.ruler.js on lines 117..130

Duplicated Code

Duplicated code can lead to software that is hard to understand and difficult to change. The Don't Repeat Yourself (DRY) principle states:

Every piece of knowledge must have a single, unambiguous, authoritative representation within a system.

When you violate DRY, bugs and maintenance problems are sure to follow. Duplicated code has a tendency to both continue to replicate and also to diverge (leaving bugs as two similar implementations differ in subtle ways).

Tuning

This issue has a mass of 156.

We set useful threshold defaults for the languages we support but you may want to adjust these settings based on your project guidelines.

The threshold configuration represents the minimum mass a code block must have to be analyzed for duplication. The lower the threshold, the more fine-grained the comparison.

If the engine is too easily reporting duplication, try raising the threshold. If you suspect that the engine isn't catching enough duplication, try lowering the threshold. The best setting tends to differ from language to language.

See codeclimate-duplication's documentation for more information about tuning the mass threshold in your .codeclimate.yml.

Refactorings

Further Reading

Identical blocks of code found in 3 locations. Consider refactoring.
Open

      if (this._active) {
        const prevPosition = this._moveHandle.worldPosition.clone();

        this._dragged = true;
        this._moveHandle.onMove(evt, true);
Severity: Major
Found in src/widgets/widgets.ruler.js and 2 other locations - About 6 hrs to fix
src/widgets/widgets.angle.js on lines 132..145
src/widgets/widgets.crossRuler.js on lines 134..147

Duplicated Code

Duplicated code can lead to software that is hard to understand and difficult to change. The Don't Repeat Yourself (DRY) principle states:

Every piece of knowledge must have a single, unambiguous, authoritative representation within a system.

When you violate DRY, bugs and maintenance problems are sure to follow. Duplicated code has a tendency to both continue to replicate and also to diverge (leaving bugs as two similar implementations differ in subtle ways).

Tuning

This issue has a mass of 156.

We set useful threshold defaults for the languages we support but you may want to adjust these settings based on your project guidelines.

The threshold configuration represents the minimum mass a code block must have to be analyzed for duplication. The lower the threshold, the more fine-grained the comparison.

If the engine is too easily reporting duplication, try raising the threshold. If you suspect that the engine isn't catching enough duplication, try lowering the threshold. The best setting tends to differ from language to language.

See codeclimate-duplication's documentation for more information about tuning the mass threshold in your .codeclimate.yml.

Refactorings

Further Reading

Identical blocks of code found in 3 locations. Consider refactoring.
Open

      if (this._active) {
        const prevPosition = this._moveHandle.worldPosition.clone();

        this._dragged = true;
        this._moveHandle.onMove(evt, true);
Severity: Major
Found in src/widgets/widgets.angle.js and 2 other locations - About 6 hrs to fix
src/widgets/widgets.crossRuler.js on lines 134..147
src/widgets/widgets.ruler.js on lines 117..130

Duplicated Code

Duplicated code can lead to software that is hard to understand and difficult to change. The Don't Repeat Yourself (DRY) principle states:

Every piece of knowledge must have a single, unambiguous, authoritative representation within a system.

When you violate DRY, bugs and maintenance problems are sure to follow. Duplicated code has a tendency to both continue to replicate and also to diverge (leaving bugs as two similar implementations differ in subtle ways).

Tuning

This issue has a mass of 156.

We set useful threshold defaults for the languages we support but you may want to adjust these settings based on your project guidelines.

The threshold configuration represents the minimum mass a code block must have to be analyzed for duplication. The lower the threshold, the more fine-grained the comparison.

If the engine is too easily reporting duplication, try raising the threshold. If you suspect that the engine isn't catching enough duplication, try lowering the threshold. The best setting tends to differ from language to language.

See codeclimate-duplication's documentation for more information about tuning the mass threshold in your .codeclimate.yml.

Refactorings

Further Reading

Identical blocks of code found in 2 locations. Consider refactoring.
Open

      if (this._units === 'units' && !this._label.hasAttribute('title')) {
        this._label.setAttribute('title', 'Calibration is required to display the area in cm²');
        this._label.style.color = this._colors.error;
      } else if (this._units !== 'units' && this._label.hasAttribute('title')) {
        this._label.removeAttribute('title');
Severity: Major
Found in src/widgets/widgets.rectangle.js and 1 other location - About 5 hrs to fix
src/widgets/widgets.ellipse.js on lines 369..375

Duplicated Code

Duplicated code can lead to software that is hard to understand and difficult to change. The Don't Repeat Yourself (DRY) principle states:

Every piece of knowledge must have a single, unambiguous, authoritative representation within a system.

When you violate DRY, bugs and maintenance problems are sure to follow. Duplicated code has a tendency to both continue to replicate and also to diverge (leaving bugs as two similar implementations differ in subtle ways).

Tuning

This issue has a mass of 150.

We set useful threshold defaults for the languages we support but you may want to adjust these settings based on your project guidelines.

The threshold configuration represents the minimum mass a code block must have to be analyzed for duplication. The lower the threshold, the more fine-grained the comparison.

If the engine is too easily reporting duplication, try raising the threshold. If you suspect that the engine isn't catching enough duplication, try lowering the threshold. The best setting tends to differ from language to language.

See codeclimate-duplication's documentation for more information about tuning the mass threshold in your .codeclimate.yml.

Refactorings

Further Reading

Similar blocks of code found in 4 locations. Consider refactoring.
Open

      if (distanceData.units === 'units' && !this._label.hasAttribute('title')) {
        this._label.setAttribute('title', title);
        this._label.style.color = this._colors.error;
      } else if (distanceData.units !== 'units' && this._label.hasAttribute('title')) {
        this._label.removeAttribute('title');
Severity: Major
Found in src/widgets/widgets.biruler.js and 3 other locations - About 5 hrs to fix
src/widgets/widgets.biruler.js on lines 316..322
src/widgets/widgets.crossRuler.js on lines 343..349
src/widgets/widgets.crossRuler.js on lines 350..356

Duplicated Code

Duplicated code can lead to software that is hard to understand and difficult to change. The Don't Repeat Yourself (DRY) principle states:

Every piece of knowledge must have a single, unambiguous, authoritative representation within a system.

When you violate DRY, bugs and maintenance problems are sure to follow. Duplicated code has a tendency to both continue to replicate and also to diverge (leaving bugs as two similar implementations differ in subtle ways).

Tuning

This issue has a mass of 150.

We set useful threshold defaults for the languages we support but you may want to adjust these settings based on your project guidelines.

The threshold configuration represents the minimum mass a code block must have to be analyzed for duplication. The lower the threshold, the more fine-grained the comparison.

If the engine is too easily reporting duplication, try raising the threshold. If you suspect that the engine isn't catching enough duplication, try lowering the threshold. The best setting tends to differ from language to language.

See codeclimate-duplication's documentation for more information about tuning the mass threshold in your .codeclimate.yml.

Refactorings

Further Reading

Similar blocks of code found in 4 locations. Consider refactoring.
Open

      if (distanceData.units === 'units' && !this._label.hasAttribute('title')) {
        this._label.setAttribute('title', title);
        this._label.style.color = this._colors.error;
      } else if (distanceData.units !== 'units' && this._label.hasAttribute('title')) {
        this._label.removeAttribute('title');
Severity: Major
Found in src/widgets/widgets.crossRuler.js and 3 other locations - About 5 hrs to fix
src/widgets/widgets.biruler.js on lines 309..315
src/widgets/widgets.biruler.js on lines 316..322
src/widgets/widgets.crossRuler.js on lines 350..356

Duplicated Code

Duplicated code can lead to software that is hard to understand and difficult to change. The Don't Repeat Yourself (DRY) principle states:

Every piece of knowledge must have a single, unambiguous, authoritative representation within a system.

When you violate DRY, bugs and maintenance problems are sure to follow. Duplicated code has a tendency to both continue to replicate and also to diverge (leaving bugs as two similar implementations differ in subtle ways).

Tuning

This issue has a mass of 150.

We set useful threshold defaults for the languages we support but you may want to adjust these settings based on your project guidelines.

The threshold configuration represents the minimum mass a code block must have to be analyzed for duplication. The lower the threshold, the more fine-grained the comparison.

If the engine is too easily reporting duplication, try raising the threshold. If you suspect that the engine isn't catching enough duplication, try lowering the threshold. The best setting tends to differ from language to language.

See codeclimate-duplication's documentation for more information about tuning the mass threshold in your .codeclimate.yml.

Refactorings

Further Reading

Similar blocks of code found in 4 locations. Consider refactoring.
Open

      if (distanceData2.units === 'units' && !this._label2.hasAttribute('title')) {
        this._label2.setAttribute('title', title);
        this._label2.style.color = this._colors.error;
      } else if (distanceData2.units !== 'units' && this._label2.hasAttribute('title')) {
        this._label2.removeAttribute('title');
Severity: Major
Found in src/widgets/widgets.crossRuler.js and 3 other locations - About 5 hrs to fix
src/widgets/widgets.biruler.js on lines 309..315
src/widgets/widgets.biruler.js on lines 316..322
src/widgets/widgets.crossRuler.js on lines 343..349

Duplicated Code

Duplicated code can lead to software that is hard to understand and difficult to change. The Don't Repeat Yourself (DRY) principle states:

Every piece of knowledge must have a single, unambiguous, authoritative representation within a system.

When you violate DRY, bugs and maintenance problems are sure to follow. Duplicated code has a tendency to both continue to replicate and also to diverge (leaving bugs as two similar implementations differ in subtle ways).

Tuning

This issue has a mass of 150.

We set useful threshold defaults for the languages we support but you may want to adjust these settings based on your project guidelines.

The threshold configuration represents the minimum mass a code block must have to be analyzed for duplication. The lower the threshold, the more fine-grained the comparison.

If the engine is too easily reporting duplication, try raising the threshold. If you suspect that the engine isn't catching enough duplication, try lowering the threshold. The best setting tends to differ from language to language.

See codeclimate-duplication's documentation for more information about tuning the mass threshold in your .codeclimate.yml.

Refactorings

Further Reading

Similar blocks of code found in 4 locations. Consider refactoring.
Open

      if (distanceData2.units === 'units' && !this._label2.hasAttribute('title')) {
        this._label2.setAttribute('title', title);
        this._label2.style.color = this._colors.error;
      } else if (distanceData2.units !== 'units' && this._label2.hasAttribute('title')) {
        this._label2.removeAttribute('title');
Severity: Major
Found in src/widgets/widgets.biruler.js and 3 other locations - About 5 hrs to fix
src/widgets/widgets.biruler.js on lines 309..315
src/widgets/widgets.crossRuler.js on lines 343..349
src/widgets/widgets.crossRuler.js on lines 350..356

Duplicated Code

Duplicated code can lead to software that is hard to understand and difficult to change. The Don't Repeat Yourself (DRY) principle states:

Every piece of knowledge must have a single, unambiguous, authoritative representation within a system.

When you violate DRY, bugs and maintenance problems are sure to follow. Duplicated code has a tendency to both continue to replicate and also to diverge (leaving bugs as two similar implementations differ in subtle ways).

Tuning

This issue has a mass of 150.

We set useful threshold defaults for the languages we support but you may want to adjust these settings based on your project guidelines.

The threshold configuration represents the minimum mass a code block must have to be analyzed for duplication. The lower the threshold, the more fine-grained the comparison.

If the engine is too easily reporting duplication, try raising the threshold. If you suspect that the engine isn't catching enough duplication, try lowering the threshold. The best setting tends to differ from language to language.

See codeclimate-duplication's documentation for more information about tuning the mass threshold in your .codeclimate.yml.

Refactorings

Further Reading

Identical blocks of code found in 2 locations. Consider refactoring.
Open

      if (this._units === 'units' && !this._label.hasAttribute('title')) {
        this._label.setAttribute('title', 'Calibration is required to display the area in cm²');
        this._label.style.color = this._colors.error;
      } else if (this._units !== 'units' && this._label.hasAttribute('title')) {
        this._label.removeAttribute('title');
Severity: Major
Found in src/widgets/widgets.ellipse.js and 1 other location - About 5 hrs to fix
src/widgets/widgets.rectangle.js on lines 344..350

Duplicated Code

Duplicated code can lead to software that is hard to understand and difficult to change. The Don't Repeat Yourself (DRY) principle states:

Every piece of knowledge must have a single, unambiguous, authoritative representation within a system.

When you violate DRY, bugs and maintenance problems are sure to follow. Duplicated code has a tendency to both continue to replicate and also to diverge (leaving bugs as two similar implementations differ in subtle ways).

Tuning

This issue has a mass of 150.

We set useful threshold defaults for the languages we support but you may want to adjust these settings based on your project guidelines.

The threshold configuration represents the minimum mass a code block must have to be analyzed for duplication. The lower the threshold, the more fine-grained the comparison.

If the engine is too easily reporting duplication, try raising the threshold. If you suspect that the engine isn't catching enough duplication, try lowering the threshold. The best setting tends to differ from language to language.

See codeclimate-duplication's documentation for more information about tuning the mass threshold in your .codeclimate.yml.

Refactorings

Further Reading

Identical blocks of code found in 2 locations. Consider refactoring.
Open

        if (this._newHandleRequired && !this._initialized) {
          this._handles[this._handles.length - 1].hovered = false;
          this._handles[this._handles.length - 1].active = false;
          this._handles[this._handles.length - 1].tracking = false;
Severity: Major
Found in src/widgets/widgets.polygon.js and 1 other location - About 5 hrs to fix
src/widgets/widgets.freehand.js on lines 126..154

Duplicated Code

Duplicated code can lead to software that is hard to understand and difficult to change. The Don't Repeat Yourself (DRY) principle states:

Every piece of knowledge must have a single, unambiguous, authoritative representation within a system.

When you violate DRY, bugs and maintenance problems are sure to follow. Duplicated code has a tendency to both continue to replicate and also to diverge (leaving bugs as two similar implementations differ in subtle ways).

Tuning

This issue has a mass of 149.

We set useful threshold defaults for the languages we support but you may want to adjust these settings based on your project guidelines.

The threshold configuration represents the minimum mass a code block must have to be analyzed for duplication. The lower the threshold, the more fine-grained the comparison.

If the engine is too easily reporting duplication, try raising the threshold. If you suspect that the engine isn't catching enough duplication, try lowering the threshold. The best setting tends to differ from language to language.

See codeclimate-duplication's documentation for more information about tuning the mass threshold in your .codeclimate.yml.

Refactorings

Further Reading

Similar blocks of code found in 4 locations. Consider refactoring.
Open

    addEventListeners() {
      this._container.addEventListener('wheel', this.onMove);

      this._line.addEventListener('mouseenter', this.onHover);
      this._line.addEventListener('mouseleave', this.onHover);
Severity: Major
Found in src/widgets/widgets.angle.js and 3 other locations - About 5 hrs to fix
src/widgets/widgets.angle.js on lines 76..85
src/widgets/widgets.ellipse.js on lines 69..78
src/widgets/widgets.ellipse.js on lines 80..89

Duplicated Code

Duplicated code can lead to software that is hard to understand and difficult to change. The Don't Repeat Yourself (DRY) principle states:

Every piece of knowledge must have a single, unambiguous, authoritative representation within a system.

When you violate DRY, bugs and maintenance problems are sure to follow. Duplicated code has a tendency to both continue to replicate and also to diverge (leaving bugs as two similar implementations differ in subtle ways).

Tuning

This issue has a mass of 148.

We set useful threshold defaults for the languages we support but you may want to adjust these settings based on your project guidelines.

The threshold configuration represents the minimum mass a code block must have to be analyzed for duplication. The lower the threshold, the more fine-grained the comparison.

If the engine is too easily reporting duplication, try raising the threshold. If you suspect that the engine isn't catching enough duplication, try lowering the threshold. The best setting tends to differ from language to language.

See codeclimate-duplication's documentation for more information about tuning the mass threshold in your .codeclimate.yml.

Refactorings

Further Reading

Similar blocks of code found in 4 locations. Consider refactoring.
Open

    removeEventListeners() {
      this._container.removeEventListener('wheel', this.onMove);

      this._line.removeEventListener('mouseenter', this.onHover);
      this._line.removeEventListener('mouseleave', this.onHover);
Severity: Major
Found in src/widgets/widgets.angle.js and 3 other locations - About 5 hrs to fix
src/widgets/widgets.angle.js on lines 65..74
src/widgets/widgets.ellipse.js on lines 69..78
src/widgets/widgets.ellipse.js on lines 80..89

Duplicated Code

Duplicated code can lead to software that is hard to understand and difficult to change. The Don't Repeat Yourself (DRY) principle states:

Every piece of knowledge must have a single, unambiguous, authoritative representation within a system.

When you violate DRY, bugs and maintenance problems are sure to follow. Duplicated code has a tendency to both continue to replicate and also to diverge (leaving bugs as two similar implementations differ in subtle ways).

Tuning

This issue has a mass of 148.

We set useful threshold defaults for the languages we support but you may want to adjust these settings based on your project guidelines.

The threshold configuration represents the minimum mass a code block must have to be analyzed for duplication. The lower the threshold, the more fine-grained the comparison.

If the engine is too easily reporting duplication, try raising the threshold. If you suspect that the engine isn't catching enough duplication, try lowering the threshold. The best setting tends to differ from language to language.

See codeclimate-duplication's documentation for more information about tuning the mass threshold in your .codeclimate.yml.

Refactorings

Further Reading

Similar blocks of code found in 4 locations. Consider refactoring.
Open

    removeEventListeners() {
      this._container.removeEventListener('wheel', this.onMove);

      this._rectangle.removeEventListener('mouseenter', this.onHover);
      this._rectangle.removeEventListener('mouseleave', this.onHover);
Severity: Major
Found in src/widgets/widgets.ellipse.js and 3 other locations - About 5 hrs to fix
src/widgets/widgets.angle.js on lines 65..74
src/widgets/widgets.angle.js on lines 76..85
src/widgets/widgets.ellipse.js on lines 69..78

Duplicated Code

Duplicated code can lead to software that is hard to understand and difficult to change. The Don't Repeat Yourself (DRY) principle states:

Every piece of knowledge must have a single, unambiguous, authoritative representation within a system.

When you violate DRY, bugs and maintenance problems are sure to follow. Duplicated code has a tendency to both continue to replicate and also to diverge (leaving bugs as two similar implementations differ in subtle ways).

Tuning

This issue has a mass of 148.

We set useful threshold defaults for the languages we support but you may want to adjust these settings based on your project guidelines.

The threshold configuration represents the minimum mass a code block must have to be analyzed for duplication. The lower the threshold, the more fine-grained the comparison.

If the engine is too easily reporting duplication, try raising the threshold. If you suspect that the engine isn't catching enough duplication, try lowering the threshold. The best setting tends to differ from language to language.

See codeclimate-duplication's documentation for more information about tuning the mass threshold in your .codeclimate.yml.

Refactorings

Further Reading

Similar blocks of code found in 4 locations. Consider refactoring.
Open

    addEventListeners() {
      this._container.addEventListener('wheel', this.onMove);

      this._rectangle.addEventListener('mouseenter', this.onHover);
      this._rectangle.addEventListener('mouseleave', this.onHover);
Severity: Major
Found in src/widgets/widgets.ellipse.js and 3 other locations - About 5 hrs to fix
src/widgets/widgets.angle.js on lines 65..74
src/widgets/widgets.angle.js on lines 76..85
src/widgets/widgets.ellipse.js on lines 80..89

Duplicated Code

Duplicated code can lead to software that is hard to understand and difficult to change. The Don't Repeat Yourself (DRY) principle states:

Every piece of knowledge must have a single, unambiguous, authoritative representation within a system.

When you violate DRY, bugs and maintenance problems are sure to follow. Duplicated code has a tendency to both continue to replicate and also to diverge (leaving bugs as two similar implementations differ in subtle ways).

Tuning

This issue has a mass of 148.

We set useful threshold defaults for the languages we support but you may want to adjust these settings based on your project guidelines.

The threshold configuration represents the minimum mass a code block must have to be analyzed for duplication. The lower the threshold, the more fine-grained the comparison.

If the engine is too easily reporting duplication, try raising the threshold. If you suspect that the engine isn't catching enough duplication, try lowering the threshold. The best setting tends to differ from language to language.

See codeclimate-duplication's documentation for more information about tuning the mass threshold in your .codeclimate.yml.

Refactorings

Further Reading

Similar blocks of code found in 2 locations. Consider refactoring.
Open

  _initRenderer(containerId) {
    // renderer
    this._container = document.getElementById(containerId);
    this._renderer = new THREE.WebGLRenderer({
      antialias: true,
Severity: Major
Found in src/helpers/x/helpers.x.renderer2d.js and 1 other location - About 5 hrs to fix
src/helpers/x/helpers.x.renderer3d.js on lines 72..82

Duplicated Code

Duplicated code can lead to software that is hard to understand and difficult to change. The Don't Repeat Yourself (DRY) principle states:

Every piece of knowledge must have a single, unambiguous, authoritative representation within a system.

When you violate DRY, bugs and maintenance problems are sure to follow. Duplicated code has a tendency to both continue to replicate and also to diverge (leaving bugs as two similar implementations differ in subtle ways).

Tuning

This issue has a mass of 140.

We set useful threshold defaults for the languages we support but you may want to adjust these settings based on your project guidelines.

The threshold configuration represents the minimum mass a code block must have to be analyzed for duplication. The lower the threshold, the more fine-grained the comparison.

If the engine is too easily reporting duplication, try raising the threshold. If you suspect that the engine isn't catching enough duplication, try lowering the threshold. The best setting tends to differ from language to language.

See codeclimate-duplication's documentation for more information about tuning the mass threshold in your .codeclimate.yml.

Refactorings

Further Reading

Similar blocks of code found in 2 locations. Consider refactoring.
Open

  _initRenderer(containerId) {
    // renderer
    this._container = document.getElementById(containerId);
    this._renderer = new THREE.WebGLRenderer({
      antialias: true,
Severity: Major
Found in src/helpers/x/helpers.x.renderer3d.js and 1 other location - About 5 hrs to fix
src/helpers/x/helpers.x.renderer2d.js on lines 61..71

Duplicated Code

Duplicated code can lead to software that is hard to understand and difficult to change. The Don't Repeat Yourself (DRY) principle states:

Every piece of knowledge must have a single, unambiguous, authoritative representation within a system.

When you violate DRY, bugs and maintenance problems are sure to follow. Duplicated code has a tendency to both continue to replicate and also to diverge (leaving bugs as two similar implementations differ in subtle ways).

Tuning

This issue has a mass of 140.

We set useful threshold defaults for the languages we support but you may want to adjust these settings based on your project guidelines.

The threshold configuration represents the minimum mass a code block must have to be analyzed for duplication. The lower the threshold, the more fine-grained the comparison.

If the engine is too easily reporting duplication, try raising the threshold. If you suspect that the engine isn't catching enough duplication, try lowering the threshold. The best setting tends to differ from language to language.

See codeclimate-duplication's documentation for more information about tuning the mass threshold in your .codeclimate.yml.

Refactorings

Further Reading

Identical blocks of code found in 2 locations. Consider refactoring.
Open

      if (this._dragged || !this._handles[this._handles.length - 1].tracking) {
        this._handles[this._handles.length - 1].tracking = false;
        this._handles[this._handles.length - 1].onEnd();
      } else {
        this._handles[this._handles.length - 1].tracking = false;
Severity: Major
Found in src/widgets/widgets.velocityTimeIntegral.js and 1 other location - About 5 hrs to fix
src/widgets/widgets.freehand.js on lines 185..190

Duplicated Code

Duplicated code can lead to software that is hard to understand and difficult to change. The Don't Repeat Yourself (DRY) principle states:

Every piece of knowledge must have a single, unambiguous, authoritative representation within a system.

When you violate DRY, bugs and maintenance problems are sure to follow. Duplicated code has a tendency to both continue to replicate and also to diverge (leaving bugs as two similar implementations differ in subtle ways).

Tuning

This issue has a mass of 139.

We set useful threshold defaults for the languages we support but you may want to adjust these settings based on your project guidelines.

The threshold configuration represents the minimum mass a code block must have to be analyzed for duplication. The lower the threshold, the more fine-grained the comparison.

If the engine is too easily reporting duplication, try raising the threshold. If you suspect that the engine isn't catching enough duplication, try lowering the threshold. The best setting tends to differ from language to language.

See codeclimate-duplication's documentation for more information about tuning the mass threshold in your .codeclimate.yml.

Refactorings

Further Reading

Identical blocks of code found in 2 locations. Consider refactoring.
Open

      if (this._dragged || !this._handles[this._handles.length - 1].tracking) {
        this._handles[this._handles.length - 1].tracking = false;
        this._handles[this._handles.length - 1].onEnd();
      } else {
        this._handles[this._handles.length - 1].tracking = false;
Severity: Major
Found in src/widgets/widgets.freehand.js and 1 other location - About 5 hrs to fix
src/widgets/widgets.velocityTimeIntegral.js on lines 205..210

Duplicated Code

Duplicated code can lead to software that is hard to understand and difficult to change. The Don't Repeat Yourself (DRY) principle states:

Every piece of knowledge must have a single, unambiguous, authoritative representation within a system.

When you violate DRY, bugs and maintenance problems are sure to follow. Duplicated code has a tendency to both continue to replicate and also to diverge (leaving bugs as two similar implementations differ in subtle ways).

Tuning

This issue has a mass of 139.

We set useful threshold defaults for the languages we support but you may want to adjust these settings based on your project guidelines.

The threshold configuration represents the minimum mass a code block must have to be analyzed for duplication. The lower the threshold, the more fine-grained the comparison.

If the engine is too easily reporting duplication, try raising the threshold. If you suspect that the engine isn't catching enough duplication, try lowering the threshold. The best setting tends to differ from language to language.

See codeclimate-duplication's documentation for more information about tuning the mass threshold in your .codeclimate.yml.

Refactorings

Further Reading

Severity
Category
Status
Source
Language