frontend/constants.ts
/* eslint-disable @typescript-eslint/quotes */
import { trim } from "./util";
export namespace ToolTips {
// Farm Designer: Groups
export const SORT_DESCRIPTION =
trim(`When executing a sequence over a Group of locations, FarmBot will
travel to each group member in the order of the chosen sort method.
If the random option is chosen, FarmBot will travel in a random order
every time, so the ordering shown below will only be representative.`);
export const CRITERIA_SELECTION_COUNT =
trim(`Manually add group members by clicking in the map. Group members
selected by filters can only be removed by changing the filters.
Filters will be applied at the time of sequence execution.
Group members at that time may differ from those currently displayed.`);
export const DOT_NOTATION_TIP =
trim(`Tip: Use dot notation (i.e., 'meta.color') to access meta fields.`);
// Controls
export const MOVE =
trim(`Use these manual control buttons to move FarmBot in realtime.
Press the arrows for relative movements or type in new coordinates
and press GO for an absolute movement.
Tip: Press the Home button when you are done so FarmBot is ready to
get back to work.`);
export const WEBCAM =
trim(`If you have a webcam, you can view the video stream in this widget.
Press the edit button to update and save your webcam URL.
Note: Some webcam services do not allow webcam feeds to be embedded in
other sites. If you see a web browser error after adding a webcam feed,
there is unfortunately nothing FarmBot can do to fix the problem.
Please contact your webcam's customer support to see if the security
policy for embedding feeds into other sites can be changed.`);
export const PERIPHERALS =
trim(`Use these toggle switches to control FarmBot's peripherals in
realtime. To edit and create new peripherals, press the EDIT button.
Make sure to turn things off when you're done!`);
export const PINNED_SEQUENCES =
trim(`Pin a sequence in the sequence editor to add it to this list.`);
export const SENSORS =
trim(`Add sensors here to monitor FarmBot's sensors.
To edit and create new sensors, press the EDIT button.`);
export const SENSOR_HISTORY =
trim(`View and filter historical sensor reading data.`);
// FarmBot OS
export const VOLTAGE_STATUS =
trim(`Raspberry Pi power status since last reboot. If supply voltage
drops below the standard operational threshold the indicator will turn
red. Once the voltage level recovers the status will turn yellow,
indicating that a low voltage event has occurred. Low voltage may
adversely affect WiFi and camera functionality.`);
// FarmBot OS Settings: Firmware
export const FIRMWARE_VALUE_API =
trim(`Firmware value from your choice in the dropdown to the right, as
understood by the Web App.`);
export const FIRMWARE_VALUE_FBOS =
trim(`Firmware value reported from the firmware, as understood by
FarmBot OS.`);
export const FIRMWARE_VALUE_MCU =
trim(`Firmware value reported from the firmware.`);
export const RPI_VALUE_API =
trim(`Raspberry Pi model from your choice in the dropdown to the right,
as understood by the Web App.`);
export const RPI_VALUE_FBOS =
trim(`Raspberry Pi model reported from your device, as understood by
FarmBot OS.`);
// Hardware Settings
export const HW_SETTINGS =
trim(`Caution: Changing these settings to extreme values can cause
hardware malfunction. Make sure to test any new settings to verify
that everything works as expected before letting your FarmBot use
them unsupervised.`);
// Hardware Settings: Axes
export const FIND_HOME_ENCODERS =
trim(`If encoders or limit switches are enabled, find home for
an axis (set zero position).`);
export const FIND_HOME_STALL_DETECTION =
trim(`If stall detection or limit switches are enabled, find home for
an axis (set zero position).`);
export const FIND_LENGTH_ENCODERS =
trim(`If encoders or limit switches are enabled, home axis and determine
maximum. Will set axis length value.`);
export const FIND_LENGTH_STALL_DETECTION =
trim(`If stall detection or limit switches are enabled, home axis and
determine maximum. Will set axis length value.`);
export const SET_AXIS_LENGTH =
trim(`Set axis length to the current FarmBot axis position.`);
export const SET_HOME_POSITION =
trim(`Set the current location as home (zero).`);
export const FIND_HOME_ON_BOOT_ENCODERS =
trim(`If encoders or limit switches are enabled, find the home position
when the device powers on. Warning! This will perform homing on all
axes when the device powers on. Encoders or limit switches must be enabled.
It is recommended to make sure homing works properly before enabling
this feature. (default: x: {{ x }}, y: {{ y }}, z: {{ z }})`);
export const FIND_HOME_ON_BOOT_STALL_DETECTION =
trim(`If stall detection or limit switches are enabled, find the home
position when the device powers on. Warning! This will perform homing
on all axes when the device powers on. Stall detection or limit switches
must be enabled. It is recommended to make sure homing works properly
before enabling this feature. (default: x: {{ x }}, y: {{ y }}, z: {{ z }})`);
export const STOP_AT_HOME =
trim(`Stop at the home (zero) location of the axis. If enabled, moving
past zero is disallowed. (default: x: {{ x }}, y: {{ y }}, z: {{ z }})`);
export const STOP_AT_MAX =
trim(`Don't allow movement past the maximum value provided in AXIS LENGTH
(for AXIS LENGTH values other than '0').
(default: x: {{ x }}, y: {{ y }}, z: {{ z }})`);
export const NEGATIVE_COORDINATES_ONLY =
trim(`Restrict travel to negative coordinate locations.
Overridden by disabling STOP AT HOME.
(default: x: {{ x }}, y: {{ y }}, z: {{ z }})`);
export const CALIBRATION_RETRIES =
trim(`Number of times to retry calibration.
(default: x: {{ x }}, y: {{ y }}, z: {{ z }})`);
export const CALIBRATION_TOTAL_RETRIES =
trim(`Total number of times to retry calibration.
(default: x: {{ x }}, y: {{ y }}, z: {{ z }})`);
export const CALIBRATION_RETRY_RESET_DISTANCE =
trim(`Distance in millimeters to group calibration retries. If the
distance traveled while detecting the axis end location exceeds this
value, the calibration retry counter is reset.
(default: x: {{ x }}, y: {{ y }}, z: {{ z }})`);
export const AXIS_LENGTH =
trim(`Set the length of each axis to provide software limits.
Used only if STOP AT MAX is enabled.
(default: x: {{ x }}, y: {{ y }}, z: {{ z }} (disabled))`);
export const GANTRY_HEIGHT =
trim(`The **GANTRY HEIGHT** is the distance in millimeters between the
bottom of FarmBot's tool head and the bottom of the gantry main beam
when the Z-axis is fully raised. It is used to determine if a plant is
too tall for the gantry to pass over it. (default: {{ distance }})`);
export const SAFE_HEIGHT =
trim(`Z axis coordinate (millimeters) to which the z axis should be
retracted during Safe Z moves. It is recommended to choose a value at
which the z axis is all of the way up to provide as much clearance as
possible. (default: 0)`);
export const FALLBACK_SOIL_HEIGHT =
trim(`Z axis coordinate (millimeters) of soil level. This value will
only be used if there are no soil height measurements available. To add
soil height measurements, run a sequence with the MEASURE SOIL HEIGHT
command in a grid over your garden. Alternatively, use a ruler to
manually measure the height at various locations in the garden and add
corresponding soil height points from the points panel. (default: 0)`);
// Hardware Settings: Motors
export const MAX_SPEED =
trim(`Maximum travel speed after acceleration in millimeters per second.
(default: x: {{ x }}mm/s, y: {{ y }}mm/s, z: {{ z }}mm/s)`);
export const MAX_SPEED_Z_TOWARD_HOME =
trim(`Maximum travel speed after acceleration in millimeters per second.
(default: {{ z }}mm/s)`);
export const HOME_SPEED =
trim(`Home position adjustment travel speed (homing and finding axis length)
in millimeters per second.
(default: x: {{ x }}mm/s, y: {{ y }}mm/s, z: {{ z }}mm/s)`);
export const MIN_SPEED =
trim(`Minimum movement speed in millimeters per second.
Also used for homing and finding axis length.
(default: x: {{ x }}mm/s, y: {{ y }}mm/s, z: {{ z }}mm/s)`);
export const MIN_SPEED_Z_TOWARD_HOME =
trim(`Minimum movement speed in millimeters per second.
Also used for homing and finding axis length.
(default: {{ z }}mm/s)`);
export const ACCELERATE_FOR =
trim(`Number of millimeters used for acceleration and deceleration.
(default: x: {{ x }}mm, y: {{ y }}mm, z: {{ z }}mm)`);
export const ACCELERATE_FOR_Z_TOWARD_HOME =
trim(`Number of millimeters used for acceleration and deceleration.
(default: {{ z }}mm)`);
export const STEPS_PER_MM =
trim(`The number of motor steps required to move the axis one millimeter.
(default: x: {{ x }}, y: {{ y }}, z: {{ z }})`);
export const MICROSTEPS_PER_STEP =
trim(`The number of microsteps required to move the motor one step.
(default: x: {{ x }}, y: {{ y }}, z: {{ z }})`);
export const MICROSTEP_WARNING =
trim(`A microstep value of 1 is recommended for best performance when
quiet motor mode is enabled.`);
export const ALWAYS_POWER_MOTORS =
trim(`Keep power applied to motors. Prevents slipping from gravity in
certain situations. (default: x: {{ x }}, y: {{ y }}, z: {{ z }})`);
export const INVERT_MOTORS =
trim(`Invert direction of motor while finding axis length.
(default: x: {{ x }}, y: {{ y }}, z: {{ z }})`);
export const MOTOR_CURRENT =
trim(`Motor current as a percent of maximum.
(default: x: {{ x }}%, y: {{ y }}%, z: {{ z }}%)`);
export const QUIET_MODE =
trim(`Enable quiet motors.
(default: x: {{ x }}, y: {{ y }}, z: {{ z }})`);
export const ENABLE_X2_MOTOR =
trim(`Enable use of a second x-axis motor. Connects to E0 on RAMPS.
(default: {{ x2Motor }})`);
export const INVERT_X2_MOTOR =
trim(`Invert direction of motor. (default: {{ x }})`);
// Hardware Settings: Encoders / Stall Detection
export const ENABLE_ENCODERS =
trim(`Enable use of rotary encoders for stall detection,
finding axis length, and homing.
(default: x: {{ x }}, y: {{ y }}, z: {{ z }})`);
export const ENABLE_STALL_DETECTION =
trim(`Enable use of motor stall detection for detecting missed steps,
finding axis length, and homing.
(default: x: {{ x }}, y: {{ y }}, z: {{ z }})`);
export const STALL_SENSITIVITY =
trim(`Motor stall sensitivity. Most sensitive: -63.
Least sensitive: +63. (default: x: {{ x }}, y: {{ y }}, z: {{ z }})`);
export const USE_ENCODERS_FOR_POSITIONING =
trim(`Use the encoders for calculating movements in addition to using
encoders for stall detection.
(default: x: {{ x }}, y: {{ y }}, z: {{ z }})`);
export const INVERT_ENCODERS =
trim(`Reverse the direction of encoder position reading.
(default: x: {{ x }}, y: {{ y }}, z: {{ z }})`);
export const MAX_MISSED_STEPS_ENCODERS =
trim(`Number of steps missed (determined by encoder) before motor is
considered to have stalled. (default: x: {{ x }}, y: {{ y }}, z: {{ z }})`);
export const MAX_MISSED_STEPS_STALL_DETECTION =
trim(`Maximum motor load (determined by stepper driver) before
motor is considered to have stalled.
(default: x: {{ x }}, y: {{ y }}, z: {{ z }})`);
export const MISSED_STEP_DECAY_ENCODERS =
trim(`Reduction to missed step total for every good step.
(default: x: {{ x }}, y: {{ y }}, z: {{ z }})`);
export const MISSED_STEP_DECAY_STALL_DETECTION =
trim(`Travel in millimeters for stall detection to ignore during acceleration.
(default: x: {{ x }}, y: {{ y }}, z: {{ z }})`);
export const ENCODER_SCALING =
trim(`encoder scaling factor = 10000 * (motor resolution)
/ (encoder resolution).
(default: x: {{ x }}, y: {{ y }}, z: {{ z }} (10000*200/360))`);
// Hardware Settings: Limit Switches
export const ENABLE_LIMIT_SWITCHES =
trim(`Enable use of electronic limit switches for end detection,
finding axis length, and homing. Limit switches are contact switches or
momentary push buttons that can be added to the end of each axis to
be engaged when an axis reaches the end.
(default: x: {{ x }}, y: {{ y }}, z: {{ z }})`);
export const SWAP_LIMIT_SWITCHES =
trim(`Swap axis minimum and maximum limit switches.
(default: x: {{ x }}, y: {{ y }}, z: {{ z }})`);
export const INVERT_LIMIT_SWITCHES =
trim(`Invert axis limit switches. Enable for normally closed (NC),
disable for normally open (NO).
(default: x: {{ x }}, y: {{ y }}, z: {{ z }})`);
// Hardware Settings: Error Handling
export const TIMEOUT_AFTER =
trim(`Amount of time to wait for a command to execute before stopping.
(default: x: {{ x }}, y: {{ y }}, z: {{ z }} seconds)`);
export const MAX_MOVEMENT_RETRIES =
trim(`Number of times to retry a movement before stopping.
(default: {{ retries }})`);
export const E_STOP_ON_MOV_ERR =
trim(`Emergency stop if movement is not complete after the maximum
number of retries. (default: {{ eStopOnError }})`);
// Hardware Settings: Pin Bindings
export const PIN_BINDINGS =
trim(`Assign an action or sequence to execute when a Raspberry Pi
GPIO pin is activated.`);
export const PIN_BINDING_WARNING =
trim(`Warning: Binding to a pin without a physical button and
pull-down resistor connected may put FarmBot into an unstable state.`);
// Hardware Settings: Pin Guard
export const PIN_GUARD_PIN_NUMBER =
trim(`The number of the pin to guard. This pin will be set to the specified
state after the duration specified by TIMEOUT.`);
// Hardware Settings: Pin Reporting
export const PIN_REPORTING_PIN_NUMBER =
trim(`The number of the pin to report. Analog pin values will be
reported every 500ms.`);
// Hardware Parameter Management
export const PARAMETER_LOAD_PROGRESS =
trim(`FarmBot adoption of hardware parameter changes. Tip: If progress
does not reach 100% within a few minutes, press RESEND.`);
export const PARAMETER_IMPORT =
trim(`Paste the output from EXPORT PARAMETERS into the text field and
press IMPORT to import new hardware parameters to your FarmBot.`);
// Photos
export const WEED_DETECTOR =
trim(`Detect weeds using FarmBot's camera and display them on the
Farm Designer map.`);
export const SOIL_HEIGHT_DETECTION =
trim(`Detect soil height using FarmBot's camera and display the results
on the Farm Designer map.`);
export const CAMERA_CALIBRATION =
trim(`Calibrate FarmBot's camera for use in the weed detection software.`);
export const RED_DOT_CAMERA_CALIBRATION =
trim(`Genesis v1.2 through v1.4 bots did not include the camera
calibration card. Instead, these kits included red calibration objects
and must be calibrated using an alternative method`);
export const CAMERA_CALIBRATION_CARD_SHOP_LINK =
trim(`Camera calibration cards are available in the shop and can be
used with any FarmBot version.`);
export const INVERT_HUE_SELECTION =
trim(`Invert the range of hues selected. Typically used to select the
full range of reds. (default: {{ defaultInvertState }})`);
export const OBJECT_SEPARATION =
trim(`Distance between calibration objects in millimeters. The distance
between the objects on the camera calibration card is 100mm.
(default: {{ defaultSeparation }})`);
export const CALIBRATION_OBJECT_AXIS =
trim(`The FarmBot axis along which the calibration objects are aligned.
(default: {{ defaultAxis }})`);
export const CAMERA_OFFSET =
trim(`Camera offset from the UTM position in millimeters.
Once calibrated, use these values to align photos to the Farm Designer
grid by matching the grid and locations in photos to the grid and
locations in the Farm Designer.
(default: (x: {{ defaultX }}, y: {{ defaultY }}))`);
export const IMAGE_BOT_ORIGIN_LOCATION =
trim(`FarmBot origin (home) location in images. If the origin does not
correspond to an image corner, rotate the camera until one does.
(default: {{ defaultOrigin }})`);
export const COORDINATE_SCALE =
trim(`Image pixel to FarmBot coordinate scale. Typically between
0.1 and 2, this value matches image scale with the FarmBot coordinate
system. (default: {{ defaultScale }} (uncalibrated))`);
export const IMAGE_ROTATION_ANGLE =
trim(`Camera rotation in degrees. This value should be minimized
(to near zero) by rotating the camera in its mount until it is aligned
with FarmBot's axes. (default: {{ defaultAngle }})`);
export const BLUR =
trim(`Image blur kernel size. Must be an odd number greater than 1.
(default: {{ defaultBlur }})`);
export const MORPH =
trim(`Size of the structuring element used for morphological
transformations. (default: {{ defaultMorph }})`);
export const ITERATIONS =
trim(`Number of erosion and dilation morphological transformation
cycles. (default: {{ defaultIteration }})`);
export const COLOR_HUE_RANGE =
trim(`Color range.
(default: {{ defaultLow }} - {{ defaultHigh }} ({{ defaultColor }}))`);
export const COLOR_SATURATION_RANGE =
trim(`Color saturation, 0 (white) to 255 (color).
(default: {{ defaultLow }} - {{ defaultHigh }})`);
export const COLOR_VALUE_RANGE =
trim(`Color value, 0 (black) to 255 (color)
(default: {{ defaultLow }} - {{ defaultHigh }})`);
export const SAVE_DETECTED_PLANTS =
trim(`Save detected plants as map points. (default: {{ defaultSavePlants }})`);
export const USE_BOUNDS =
trim(`Don't save weeds detected outside of garden bed.
(default: {{ defaultUseBounds }})`);
export const MIN_RADIUS =
trim(`Minimum weed size (diameter) in millimeters. Set to 0 to disable limit.
(default: {{ defaultMinDiameter }})`);
export const MAX_RADIUS =
trim(`Maximum weed size (diameter) in millimeters. Set to 0 to disable limit.
(default: {{ defaultMaxDiameter }})`);
// Sequences
export const SEQUENCE_COMMANDS =
trim(`These are the most basic commands FarmBot can execute. Drag and drop
them to create sequences for watering, planting seeds, measuring soil
properties, and more.`);
export const SEQUENCE_EDITOR =
trim(`Drag and drop commands here to create sequences for watering,
planting seeds, measuring soil properties, and more.
Press the Test button to immediately try your sequence with FarmBot.
You can also edit, copy, and delete existing sequences;
assign a color; and give your commands custom names.`);
export const DEFAULT_VALUE =
trim(`Select a default value for this variable.
If the sequence is ever run without the variable explicitly set to
another value, the default value will be used.`);
export const USING_DEFAULT_VARIABLE_VALUE =
trim(`No location selected. Using default value.`);
export const COMPUTED_MOVE =
trim(`The Move step instructs FarmBot to move to the specified
coordinate or distance from its current location.`);
export const SAFE_Z =
trim(`If enabled, FarmBot will: (1) Move Z to the Safe Z height,
(2) Move X and Y to the new location, and (3) Move Z to the new location`);
export const MOVE_ABSOLUTE =
trim(`The Move To step instructs FarmBot to move to the specified
coordinate regardless of the current position. For example, if FarmBot is
currently at X=1000, Y=1000 and it receives a Move To where X=0 and
Y=3000, then FarmBot will move to X=0, Y=3000. If FarmBot must move in
multiple directions, it will move diagonally. If you require straight
movements along one axis at a time, use multiple Move To steps.
Offsets allow you to more easily instruct FarmBot to move to a location,
but offset from it by the specified amount. For example moving to just
above where a peripheral is located. Using offsets lets FarmBot do the
math for you.`);
export const MOVE_RELATIVE =
trim(`The Move Relative step instructs FarmBot to move the specified
distance from its current location. For example, if FarmBot is
currently at X=1000, Y=1000 and it receives a Move Relative
where X=0 and Y=3000, then FarmBot will move to X=1000, Y=4000.
If FarmBot must move in multiple directions, it will move diagonally.
If you require straight movements along one axis at a time,
use multiple Move Relative steps. Move Relative steps should be
preceded by a Move To step to ensure you are starting from a known
location.`);
export const WRITE_PIN =
trim(`The Control Peripheral step instructs FarmBot to set the
specified pin on the Arduino to the specified mode and value.
Use the digital pin mode for on (1) and off (0) control,
and analog pin mode for PWM (pulse width modulation) (0-255).`);
export const READ_PIN =
trim(`The Read Sensor step instructs FarmBot to read the
current value of the specified sensor or peripheral.
Pin Mode: Use digital for a 0 (LOW) or 1 (HIGH) response,
and analog for a voltage reading (0-1023 for 0-5V).`);
export const WAIT =
trim(`The Wait step instructs FarmBot to wait for the specified amount
of time. Use it in combination with the Control Peripheral step to
water for a length of time.`);
export const SEND_MESSAGE =
trim(`The Send Message step instructs FarmBot to send a custom message
to the logs (and toast message and/or email, if selected). This can
help you with debugging your sequences.`);
export const FIND_HOME =
trim(`The Find Home step instructs the device to perform a homing
command (using encoders, stall detection, or limit switches) to find and set
home (zero) for the chosen axis or axes.`);
export const CALIBRATE =
trim(`If encoders, stall detection, or limit switches are enabled,
home axis and determine maximum. Will set axis length value.`);
export const IF =
trim(`Execute a sequence if a condition is satisfied. If the condition
is not satisfied, chose to do nothing or execute a different sequence.`);
export const EXECUTE_SEQUENCE =
trim(`No description provided for this subsequence.`);
export const EXECUTE_SCRIPT =
trim(`The Run Farmware step runs a Farmware package.
Visit the Farmware panel to install and manage Farmware.`);
export const DETECT_WEEDS =
trim(`The Detect Weeds step takes a photo and detects any weeds in the area.
Visit the Photos panel to view results or change parameters.`);
export const MEASURE_SOIL_HEIGHT =
trim(`The Measure Soil Height step takes a photo and detects the
z-axis coordinate of the visible soil surface. Visit the Points panel
to view results or visit the Farmware panel to change parameters.`);
export const FARMWARE_CONFIGS =
trim(`The Farmware will use the parameter values set via the Farmware
panel for any parameters that are not set in this sequence step.`);
export const TAKE_PHOTO =
trim(`Snaps a photo using the device camera. Select the camera type
in the Settings panel.`);
export const EMERGENCY_LOCK =
trim(`Stops a device from moving until it is unlocked by a user.`);
export const SELECT_A_CAMERA =
trim(`Select a camera on the Settings panel to take photos.`);
export const ROTATE_IMAGE_AT_CAPTURE =
trim(`Perform camera rotation compensation when image is captured
instead of in garden map. If enabled, image files will include
adjustment for camera rotation (black angled borders may show in
viewer). Enabling this setting will slow down photo capture.`);
export const IMAGE_RESOLUTION =
trim(`The camera will capture images at the closest available resolution
to the selected size. Changing image resolution requires recalibration
of the camera. Higher quality images will take longer to process.`);
export const CALIBRATION_REQUIRED =
trim(`Calibrate your camera in the Photos panel before detecting weeds.`);
export const MARK_AS =
trim(`The Mark As step allows FarmBot to programmatically edit the
properties of the UTM, plants, and weeds from within a sequence.
For example, you can mark a plant as "planted" during a seeding
sequence or mark a weed as "removed" after removing it.`);
export const SET_SERVO_ANGLE =
trim(`Move a servo to the provided angle. An angle of 90 degrees
corresponds to the servo midpoint (or, for a continuous rotation
servo, no movement). Tip: follow with a WAIT command to allow the servo
to reach the target position.`);
export const TOGGLE_PIN =
trim(`Toggle a digital pin on or off.`);
export const MOVE_TO_HOME =
trim(`Move FarmBot to home for the provided axis.`);
export const ASSERTION =
trim(`Evaluate Lua commands. For power users and software developers.`);
export const LUA =
trim(`Execute Lua commands. For power users and software developers.`);
export const FIRMWARE_ACTION =
trim(`FarmBot OS or micro-controller firmware action.`);
export const SYSTEM_ACTION =
trim(`FarmBot OS action.`);
export const UNKNOWN_STEP =
trim(`Unable to properly display this step.`);
// Tools
export const WATER_FLOW_RATE =
trim(`To calculate **WATER FLOW RATE**, hold a measuring cup below the
watering nozzle and click the **RUN WATER FOR 5 SECONDS** button.
Measure how much water FarmBot dispensed in milliliters (mL)
and then divide this number by 5. Enter the result in the field.`);
// Logs
export const LOGS =
trim(`View and filter log messages.`);
export const SEQUENCE_LOG_BEGIN =
trim(`Send a log message upon the start of sequence execution.`);
export const SEQUENCE_LOG_STEP =
trim(`Send a log message for each sequence step.`);
export const SEQUENCE_LOG_END =
trim(`Send a log message upon the end of sequence execution.`);
}
export namespace Content {
// Account
export const CHECK_EMAIL_TO_CONFIRM =
trim(`Please check your email to confirm email address changes.`);
export const ACCOUNT_EMAIL_CHANGE =
trim(`Warning: Upon successful change of your account email or password,
FarmBot will cease to function and become inaccessible until it is
reconfigured with your new web app credentials.`);
export const ACCOUNT_PASSWORD_CHANGE =
trim(`Upon successful password change, your FarmBot will soft reset
allowing you to configure it with the updated credentials.
You will also be logged out of other browser sessions. Continue?`);
export const ACCOUNT_RESET_WARNING =
trim(`WARNING! Resetting your account will permanently delete all of your
Sequences, Regimens, Events, Tools, Logs, and Farm Designer data.
All app settings and device settings will be reset to default values.
This is useful if you want to delete all data to start from scratch
while avoiding having to fully delete your account, re-signup, and
re-configure your FarmBot. Note that when FarmBot syncs
after resetting your account, your FarmBot will delete all of its
stored Sequences, etc, because your account will no longer have any
of these resources until you create new ones. Furthermore, upon reset
any customized device settings will be immediately overwritten with
the default values downloaded from the reset web app account.`);
export const TYPE_PASSWORD_TO_RESET =
trim(`If you are sure you want to reset your account, type in
your password below to continue.`);
export const ACCOUNT_DELETE_WARNING =
trim(`WARNING! Deleting your account will permanently delete all of your
Sequences, Regimens, Events, and Farm Designer data. Upon deleting your
account, FarmBot will cease to function and become inaccessible until it is
paired with another web app account. To do this, you will need to reboot
your FarmBot so that is goes back into configuration mode for pairing with
another user account. When this happens, all of the data on your FarmBot
will be overwritten with the new account's data. If the account is brand
new, then FarmBot will become a blank slate.`);
export const TYPE_PASSWORD_TO_DELETE =
trim(`If you are sure you want to delete your account, type in
your password below to continue.`);
export const EXPORT_DATA_DESC =
trim(`Export all data related to this device. Exports are delivered via
email as JSON file attachments.`);
export const EXPORT_SENT =
trim(`Export request received. Please allow up to 10 minutes for
delivery.`);
// Messages
export const SEED_DATA_SELECTION =
trim(`To finish setting up your account and FarmBot, please select which
FarmBot you have. Once you make a selection, we'll automatically add some
tools, sensors, peripherals, sequences, and more to get you up and running
faster. If you want to start completely from scratch, feel free to select
"Custom bot" and we won't change a thing.`);
export const RE_SEED_ACCOUNT =
trim(`Seeding your account without resetting it first may result in
duplicate resources. Continue?`);
export const TAKE_A_TOUR =
trim(`Since you're new around here, we recommend taking our guided tours
of the app. This is the fastest way to learn about the most important pages
and features at your fingertips.`);
export const READ_THE_DOCS =
trim(`The FarmBot web app is a powerful tool that allows you to control
and configure your FarmBot in any way you want. To give you so much power,
we've packed the app with a ton of settings, features, and pages, which
can be a lot to understand. That's why we've created comprehensive written
documentation and videos to teach you how to use everything.`);
export const WELCOME =
trim(`Let's get you familiar with the app and finish setting everything
up.`);
export const MESSAGE_CENTER_WELCOME =
trim(`Here you'll find important information about your account, your
FarmBot, and news such as new feature announcements. Look for the blue
badge in the main menu to see when new messages are available.`);
export const MESSAGE_DISMISS =
trim(`When you're finished with a message, press the x button in the
top right of the card to dismiss it.`);
export const FIRMWARE_MISSING =
trim(`Please choose a firmware version to install. Your choice should be
based on the type of electronics in your FarmBot according to the reference
table below.`);
export const DEMO_ACCOUNT =
trim(`Thanks for trying out the FarmBot web app!
This is a great way to introduce yourself to building sequences,
regimens, events, and designing a virtual garden.`);
export const DEMO_NOTE =
trim(`not all features of the app will work because there is not a
real FarmBot connected to this account. Additionally, keep in mind
that when you leave this web page, the demo account and all data will
be deleted.`);
export const MAKE_A_REAL_ACCOUNT =
trim(`If you want to play around and keep your data, feel free to make a
real account at`);
export const SETUP_INCOMPLETE =
trim(`Finish setting up your account and FarmBot using our setup wizard.
To open the setup wizard, click the **Setup: {{ percentComplete }}**
button in the main navigation bar.`);
// Support
export const PRIORITY_SUPPORT =
trim(`Get in touch with our support staff. Only available to customers
with a`);
export const STANDARD_SUPPORT =
trim(`Get in touch with our support staff. Only available to customers
who have purchased a full FarmBot kit from FarmBot Inc.`);
export const FORUM_SUPPORT =
trim(`Have a question for the greater FarmBot community? Get help by
asking our global community of users on the`);
export const FEEDBACK_NOTICE =
trim(`Feedback submitted through this form will be linked to your user
account and email so that we may follow up when necessary. If your
account email is not the best way for us to reach
you, please include your phone number or preferred means of contact.`);
export const MUST_REGISTER =
trim(`You must register your original FarmBot order number before
contacting support.`);
// App Settings
export const INTERNATIONALIZE_WEB_APP =
trim(`Turn off to set Web App to English.`);
export const TIME_FORMAT_24_HOUR =
trim(`Display time using the 24-hour notation,
i.e., 23:00 instead of 11:00pm`);
export const TIME_FORMAT_SECONDS =
trim(`Display seconds in time, i.e., 10:00:00am instead of 10:00am`);
export const HIDE_SENSORS_WIDGET =
trim(`If not using sensors, use this setting to remove the
panel from the Farm Designer.`);
export const ENABLE_3D_ELECTRONICS_BOX_TOP =
trim(`Show a 3D model of FarmBot's electronics box instead of a 2D view
in the Peripherals tab of the Controls pop-up.`);
export const BROWSER_SPEAK_LOGS =
trim(`Have the browser also read aloud log messages on the
"Speak" channel that are spoken by FarmBot.`);
export const LANDING_PAGE =
trim(`Choose the starting page that loads after logging in.`);
export const BROWSER_ACTIVITY_BEEP =
trim(`Have the browser beep when FarmBot sends a log message.
Verbosity can be adjusted using the slider; increase the value for more
frequent beeps.`);
export const DISCARD_UNSAVED_CHANGES =
trim(`Don't ask about saving work before
closing browser tab. Warning: may cause loss of data.`);
export const DISCARD_UNSAVED_CHANGES_CONFIRM =
trim(`Warning! When enabled, any unsaved changes
will be discarded when refreshing or closing the page. Are you sure?`);
export const EMERGENCY_UNLOCK_CONFIRM_CONFIG =
trim(`Confirm when unlocking FarmBot after an emergency stop.`);
export const CONFIRM_EMERGENCY_UNLOCK_CONFIRM_DISABLE =
trim(`Warning! When disabled, clicking the UNLOCK button will immediately
unlock FarmBot instead of confirming that it is safe to do so.
As a result, double-clicking the E-STOP button may not stop FarmBot.
Are you sure you want to disable this feature?`);
export const USER_INTERFACE_READ_ONLY_MODE =
trim(`Disallow account data changes. This does
not prevent Farmwares or FarmBot OS from changing settings.`);
// Sequence Settings
export const CONFIRM_STEP_DELETION =
trim(`Show a confirmation dialog when deleting a sequence step.`);
export const CONFIRM_SEQUENCE_DELETION =
trim(`Show a confirmation dialog when deleting a sequence.`);
export const SHOW_PINS =
trim(`Show raw pin lists in Read Sensor, Control Peripheral, and
If Statement steps.`);
export const EXPAND_STEP_OPTIONS =
trim(`Choose whether advanced step options are open or closed by default.`);
export const DISCARD_UNSAVED_SEQUENCE_CHANGES =
trim(`Don't ask about saving sequence work before
closing browser tab. Warning: may cause loss of data.`);
export const DISCARD_UNSAVED_SEQUENCE_CHANGES_CONFIRM =
trim(`Warning! When enabled, any unsaved changes to sequences
will be discarded when refreshing or closing the page. Are you sure?`);
export const VIEW_CELERY_SCRIPT =
trim(`View raw data representation of sequence steps.`);
// FarmBot OS Settings
export const DIFFERENT_TZ_WARNING =
trim(`Note: The selected timezone for your FarmBot is different than
your local browser time.`);
export const UNSTABLE_RELEASE_CHANNEL_WARNING =
trim(`Warning! Leaving the stable FarmBot OS release channel may reduce
FarmBot system stability. Are you sure?`);
export const DEVICE_NEVER_SEEN =
trim(`The device has never been seen. Most likely,
there is a network connectivity issue on the device's end.`);
export const TOO_OLD_TO_UPDATE =
trim(`Please re-flash your FarmBot's SD card.`);
export const OS_AUTO_UPDATE =
trim(`FarmBot OS will automatically download and install
software updates at the chosen time.`);
// FarmBot OS Settings: Firmware
export const RESTART_FIRMWARE =
trim(`Restart the Farmduino or Arduino firmware.`);
export const FIRMWARE_UPGRADED =
trim(`If you are upgrading your FarmBot, you may need to manually add
any new peripherals, sensors, and tools that your new electronics board
supports.`);
// FarmBot OS Settings: Power and Reset
export const RESTART_FARMBOT =
trim(`This will restart FarmBot's Raspberry Pi and controller
software.`);
export const SHUTDOWN_FARMBOT =
trim(`This will shutdown FarmBot's Raspberry Pi. To turn it
back on, unplug FarmBot and plug it back in.`);
export const SOFT_RESET_WARNING =
trim(`Soft resetting your FarmBot will revoke your FarmBot's ability
to connect to your web app account and your home WiFi network.
Upon soft resetting, your device will go into Configurator mode.`);
export const SOFT_RESET_ALERT =
trim(`Warning: This will erase data stored on your FarmBot's SD card,
requiring you to reconfigure FarmBot so that it can reconnect to your
WiFi network and web app account. Soft resetting the device will
not delete data stored in your web app account. Are you sure you wish
to continue?`);
export const HARD_RESET_WARNING =
trim(`Hard reset your FarmBot by reflashing the latest version of
FarmBot OS onto the microSD card. This will erase all data from the
device and allow you to start from a clean slate. This is recommended
if you are experiencing problems with your setup. Upon hard resetting,
your device will go into Configurator mode.`);
export const OS_RESET_WARNING =
trim(`{{ resetMethod }} resetting your FarmBot will not affect any of
your data or settings from your web app account, allowing you to do a
complete restore to your device once it is back online and paired with
your web app account.`);
export const NOT_HTTPS =
trim(`WARNING: Sending passwords via HTTP:// is not secure.`);
export const CONTACT_SYSADMIN =
trim(`Please contact the system(s) administrator(s) and ask them to enable
HTTPS://`);
// Hardware Settings: Limit Switches
export const LIMIT_SWITCH_WARNING =
trim(`Warning: Limit switches are NOT included with standard FarmBot
Genesis or Express kits. Do NOT enable limit switches unless you have
built your own FarmBot with them or added them to a stock kit.`);
// Hardware Settings: Parameter Management
export const RESTORE_DEFAULT_HARDWARE_SETTINGS =
trim(`Restoring hardware parameter defaults will destroy the
current settings, resetting them to default values.`);
export const MCU_RESET_ALERT =
trim(`Warning: This will reset all hardware settings to the default values.
Are you sure you wish to continue?`);
export const PARAMETER_IMPORT_CONFIRM =
trim(`Warning: This will overwrite all existing hardware settings,
replacing them with the provided values. Are you sure you wish to continue?`);
// Farm Designer Settings
export const PLANT_ANIMATIONS =
trim(`Enable plant animations in the garden map.`);
export const VIRTUAL_TRAIL =
trim(`Display a virtual trail for FarmBot in the garden map to show
movement and watering history while the map is open. Toggling this setting
will clear data for the current trail.`);
export const MAP_MISSED_STEPS =
trim(`Display high motor load warning indicators in map.
Requires TRAIL and stall detection to be enabled.`);
export const DYNAMIC_MAP_SIZE =
trim(`Change the garden map size based on axis length.
A value must be input in AXIS LENGTH and STOP AT MAX must be enabled in
the HARDWARE widget. Overrides MAP SIZE values.`);
export const MAP_SIZE =
trim(`Specify custom map dimensions (in millimeters).
These values set the size of the garden map unless
DYNAMIC MAP SIZE is enabled.`);
export const MAP_SWAP_XY =
trim(`Swap map X and Y axes, making the Y axis horizontal and X axis
vertical. This setting will also swap the X and Y jog control buttons
in the Move widget.`);
export const MAP_ORIGIN =
trim(`Select a map origin by clicking on one of the four quadrants to
adjust the garden map to your viewing angle.`);
export const CROP_MAP_IMAGES =
trim(`Crop images displayed in the garden map to remove black borders
from image rotation. Crop amount determined by CAMERA ROTATION value.`);
export const CLIP_PHOTOS_OUT_OF_BOUNDS =
trim(`Remove portions of images that extend beyond the garden map
boundaries.`);
export const SHOW_CAMERA_VIEW_AREA =
trim(`Show the camera's field of view in the garden map.`);
export const SHOW_UNCROPPED_CAMERA_VIEW_AREA =
trim(`Show the camera's uncropped and unrotated field of view in the
garden map when CROP MAP IMAGES is enabled.`);
export const CONFIRM_PLANT_DELETION =
trim(`Show a confirmation dialog when deleting a plant.`);
export const DEFAULT_PLANT_DEPTH =
trim(`When adding plants to the map from the web app, set each new
plant's depth to this value (in millimeters).`);
// App
export const APP_LOAD_TIMEOUT_MESSAGE =
trim(`App could not be fully loaded, we recommend you try
refreshing the page.`);
export const MQTT_DISCONNECTED =
trim(`Your web browser is unable to connect to the message broker.
You might be behind a firewall or disconnected from the Internet. Check
your network settings. View the connection status for more details.`);
export const WEB_APP_DISCONNECTED =
trim(`Your web browser is unable to communicate with the
web app server. Make sure you are connected to the Internet.`);
export const MALFORMED_MESSAGE_REC_UPGRADE =
trim(`FarmBot sent a malformed message. You may need to upgrade
FarmBot OS. Please upgrade FarmBot OS and log back in.`);
export const OLD_FBOS_REC_UPGRADE =
trim(`Your version of FarmBot OS is outdated and will soon no longer
be supported. Please update your device as soon as possible.`);
export const OLD_FBOS_UNSUPPORTED =
trim(`You are running an old version of FarmBot OS that is no longer
supported.`);
export const FORCE_REFRESH_CONFIRM =
trim(`A new version of the FarmBot web app has been released.
Refresh page?`);
export const FORCE_REFRESH_CANCEL_WARNING =
trim(`You may experience data loss if you do not refresh the page.`);
export const DELETE_ALL_LOGS_CONFIRMATION =
trim(`Are you sure you want to delete all logs? A page refresh will be
required.`);
// Front Page
export const TOS_UPDATE =
trim(`The terms of service have recently changed. You must accept the
new terms of service to continue using the site.`);
export const VERIFICATION_EMAIL_RESENT =
trim(`Verification email resent. Please check your email!`);
export const VERIFICATION_EMAIL_RESEND_ERROR =
trim(`Unable to resend verification email. Are you already verified?`);
// Sequences
export const NO_SEQUENCE_SELECTED =
trim(`Click one in the Sequences panel to edit, or click "+" to create
a new one.`);
export const NO_SEQUENCES =
trim(`Click "+" to create a new sequence.`);
export const RECURSIVE =
trim(`This step executes the sequence that contains it, which may
cause an infinite loop.`);
export const END_DETECTION_DISABLED =
trim(`This command will not execute correctly because you do not have
encoders, stall detection, or limit switches enabled for the chosen axis.
Enable limit switches, encoders, or stall detection from the Settings panel
for: `);
export const REBOOT_STEP =
trim(`Power cycle FarmBot's onboard computer.`);
export const SHUTDOWN_STEP =
trim(`Power down FarmBot's onboard computer.`);
export const ESTOP_STEP =
trim(`Unlocking a device requires user intervention.`);
export const IN_USE =
trim(`Used in another resource. Protected from deletion.`);
export const INCLUDES_DEPRECATED_STEPS =
trim(`This sequence includes deprecated steps.`);
export const IS_PINNED =
trim(`This sequence is pinned.`);
export const PUBLISH_SEQUENCE_ONCE_PUBLISHED =
trim(`Once published, anyone may find and use the sequence free of
charge for tasks including but not limited to:`);
export const PUBLISH_SEQUENCE_MAY_IMPORT =
trim(`Importing the sequence into their FarmBot account to view and use
it as they deem fit`);
export const REPUBLISH_WARNING =
trim(`Republishing this sequence will prevent you from viewing public
copies and upgrading to versions from the current import source.`);
export const PUBLISH_SEQUENCE_NEW_VERSIONS =
trim(`You can publish new versions of this sequence at any time, which
other users may choose to upgrade to.`);
export const PUBLISH_SEQUENCE_UNPUBLISH =
trim(`You may also unpublish the sequence and/or delete it from your
account at any time to disable the share link. However, these actions
will not affect existing imports owned by other user accounts.`);
export const SEQUENCE_VERSIONS =
trim(`When you publish a new version, other users of the sequence may
optionally upgrade to the latest version.`);
export const SAVE_SEQUENCE_BEFORE_PUBLISHING =
trim(`You must save changes to the sequence before publishing a new
version.`);
export const IMPORT_SEQUENCE =
trim(`Importing this sequence will allow you to use it with your
FarmBot and make changes. If the original author of the sequence
publishes a new version, you will have the option to upgrade your copy.`);
export const INCLUDES_LUA_WARNING =
trim(`This sequence includes Lua code. Review carefully before executing.`);
export const IMPORTED_SEQUENCE =
trim(`This sequence was imported from a publicly shared sequence. If
the original author publishes a new version, you may upgrade your copy.
Upgrading will overwrite your copy with the contents of the new version.
It is recommended you check your FarmBot continues operating as expected
after any upgrades.`);
export const SEQUENCE_FORKED =
trim(`You have made custom modifications to this imported sequence.
Upgrading will overwrite all modifications, replacing your copy with
the chosen public version.`);
// Regimens
export const NO_REGIMEN_SELECTED =
trim(`Click one in the Regimens panel to edit, or click "+" to create
a new one.`);
export const NO_REGIMENS =
trim(`Click "+" to create a new regimen.`);
export const WITHIN_HOUR_OF_OS_UPDATE =
trim(`Warning: One or more items are scheduled to run within one hour
of the FarmBot OS update time setting.`);
// Farm Designer
export const OUTSIDE_PLANTING_AREA =
trim(`Outside of planting area. Plants must be placed within the grid.`);
export const CREATE_POINTS_DESCRIPTION =
trim(`Click and drag or use the inputs to draw a point.`);
export const CREATE_WEEDS_DESCRIPTION =
trim(`Click and drag or use the inputs to draw a weed.`);
export const BOX_SELECT_DESCRIPTION =
trim(`Drag a box around the items you would like to select.`);
export const SAVED_GARDENS =
trim(`Create a new garden from scratch or by copying plants from the
current garden.`);
export const ERROR_PLANT_TEMPLATE_GROUP =
trim(`Cannot create a group with these plants.
Try leaving the saved garden first.`);
export const NO_PLANTS =
trim(`Press "+" to add a plant to your garden.`);
export const NO_GARDENS =
trim(`Press "+" to add a garden.`);
export const NO_POINTS =
trim(`Press "+" to add a point to your garden.`);
export const NO_GROUPS =
trim(`Press "+" to add a group.`);
export const NO_WEEDS =
trim(`Press "+" to add a weed.`);
export const NO_FARMWARE =
trim(`Press "+" to add a Farmware.`);
export const NO_PERIPHERALS =
trim(`Press "edit" to add a peripheral.`);
export const NO_SENSORS =
trim(`Press "edit" to add a sensor.`);
export const NO_ZONES =
trim(`Press "+" to add a zone.`);
export const NO_CURVES =
trim(`Press "+" to add a curve.`);
export const ENTER_CROP_SEARCH_TERM =
trim(`Search for a crop to add to your garden.`);
export const CROP_NOT_FOUND_INTRO =
trim(`Would you like to`);
export const CROP_NOT_FOUND_LINK =
trim(`add this crop on OpenFarm?`);
export const NO_TOOLS =
trim(`Press "+" to add a new tool or seed container.`);
export const NO_SEED_CONTAINERS =
trim(`Press "+" to add a seed container.`);
export const MOUNTED_TOOL =
trim(`The tool currently mounted to the UTM can be set here or by using
a MARK AS step in a sequence. Use the verify button or read the tool
verification pin in a sequence to verify that a tool is attached.`);
// Farm Events
export const NOTHING_SCHEDULED =
trim(`Press "+" to schedule an event.`);
export const REGIMEN_TODAY_SKIPPED_ITEM_RISK =
trim(`You are scheduling a regimen to run today. Be aware that
running a regimen too late in the day may result in skipped
regimen tasks. Consider rescheduling this event to tomorrow if
this is a concern.`);
export const FARM_EVENT_TZ_WARNING =
trim(`Note: Times displayed according to FarmBot's local time, which
is currently different from your browser's time. Timezone data is
configurable in the Settings panel).`);
export const FIRST_PARTY_WARNING =
trim(`Are you sure you want to delete this first party farmware?
Doing so will limit the functionality of your FarmBot and
may cause unexpected behavior.`);
export const MISSING_EXECUTABLE =
trim(`You haven't made any sequences or regimens yet. To add an event,
first create a sequence or regimen.`);
// Farmware
export const NO_IMAGES_YET =
trim(`You haven't yet taken any photos with your FarmBot.
Once you do, they will show up here.`);
export const PROCESSING_PHOTO =
trim(`Processing now. Results usually available in one minute.
Check log messages for result status.`);
export const NOT_AVAILABLE_WHEN_OFFLINE =
trim(`Not available when device is offline.`);
export const NO_CAMERA_SELECTED =
trim(`No camera selected`);
export const CAMERA_NOT_CALIBRATED =
trim(`Camera calibration required`);
export const CAMERA_CALIBRATION_RED_OBJECTS =
trim(`Place the two red calibration objects 100mm apart and aligned
with FarmBot's axes on the soil underneath the camera.`);
export const CAMERA_CALIBRATION_GRID_PATTERN =
trim(`Place the camera calibration card face down on the soil
underneath the camera, with the grid of white circles facing up.
Can be in any orientation but must be fully visible to the camera.
Caution: FarmBot will make three small x-axis and y-axis movements
during calibration.`);
export const FARMWARE_ENV_EDITOR_WARNING =
trim(`Warning: Changing the values below may cause app and device errors.`);
export const FARMWARE_ENV_EDITOR_LUA =
trim(`Custom settings can be added here and accessed via the Lua env()
function.`);
export const FARMWARE_ENV_EDITOR_INFO =
trim(`Environment variables added here can be accessed via the LUA
sequence step 'env()' function.`);
// Other
export const DOWNLOAD_FBOS =
trim(`Download the version of FarmBot OS that corresponds to your
FarmBot kit and its internal computer.`);
export const SHIPPING_BOX_LABEL_PROMPT =
trim(`Check the side of the box your FarmBot came in. What is the
labeled version?`);
export const PI_POWER_CABLE_COLOR_PROMPT =
trim(`Look inside the electronics box. What color cable is plugged into
the top of the Raspberry Pi (the green circuit board)?`);
export const FEATURED_SEQUENCES =
trim(`Featured shared sequences published by FarmBot Inc.`);
export const UNSUPPORTED_BROWSER =
trim(`Your web browser may not work properly with the FarmBot Web App.
If you experience any issues, try using a recent version of Chrome,
Firefox, or Edge.`);
export const MIT_LICENSE_PART_1 =
trim(`
Permission is hereby granted, free of charge, to any person obtaining a copy
of this software and associated documentation files (the "Software"), to deal
in the Software without restriction, including without limitation the rights
to use, copy, modify, merge, publish, distribute, sublicense, and/or sell
copies of the Software, and to permit persons to whom the Software is
furnished to do so, subject to the following conditions:`);
export const MIT_LICENSE_PART_2 =
trim(`
The above copyright notice and this permission notice shall be included in
all copies or substantial portions of the Software.`);
export const MIT_LICENSE_PART_3 =
trim(`
THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR
IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY,
FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL THE
AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER
LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM,
OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN
THE SOFTWARE.`);
}
export namespace TourContent {
// Getting started
export const GETTING_STARTED =
trim(`Welcome to the FarmBot web app! In this tour you'll become
familiar with the overall organization of the app.`);
export const PLANTS_PANEL =
trim(`This is the plants panel. Here you can view and manage all of the
plants in your garden. Mousing over a plant in the list will highlight
it in the map and vice versa. Clicking a plant will open up the plant
details panel where you can edit it. Pressing the plant + button will allow
you to search for and add new crops to your garden.`);
export const GROUPS_PANEL =
trim(`This is the groups section. Here you can create and manage groups
of plants based on any criteria. Clicking a group will open up the group
details panel where you can make edits.
Pressing the group + button will create a new group.`);
export const SEQUENCES_PANEL =
trim(`This is the sequences panel. Here you can view and manage all of
your sequences. Clicking a sequence will open up the sequence editor
panel where you can edit it. Pressing the + button will create a new
sequence.`);
export const REGIMENS_PANEL =
trim(`This is the regimens panel. Here you can view and manage all of
your regimens which allow you to bulk schedule sequences based on the
age of a plant. Clicking a regimen will open up the regimen editor
panel where you can edit it. Pressing the + button will create a new
regimen.`);
export const FARM_EVENTS_PANEL =
trim(`This is the events panel. Here you can view and manage all of
your scheduled sequences and regimens. Clicking an event will open up
the event details panel where you can edit it. Pressing the + button
will create a new event.`);
export const POINTS_PANEL =
trim(`This is the points panel. Here you can view and manage all of the
points in your garden, including measured soil height points. Mousing
over a point in the list will highlight it in the map and vice versa.
Clicking a point will open up the point details panel where you can
edit it. Pressing the point + button will allow you to add a point or a grid
of points to the map.`);
export const WEEDS_PANEL =
trim(`This is the weeds panel. Here you can view and manage all of the
weeds in your garden. Mousing over a weed in the list will highlight
it in the map and vice versa. Newly detected weeds will appear in the
PENDING category, which you must periodically approve to be listed
in the ACTIVE category. Once a weed has been dealt with by FarmBot, it
can be moved to the REMOVED category with a Mark As sequence command.
Clicking a weed will open up the weed details panel where you can
manually edit it.`);
export const CURVES_PANEL =
trim(`This is the curves panel. Here you can view and manage all of the
water, spread, and height curves for your plants. Pressing the + button
will create a new curve.`);
export const CONTROLS_PANEL =
trim(`Here you can control your FarmBot in
realtime by pressing the movement arrow buttons, toggling peripherals,
and executing pinned sequences. You can also view current status
information about your FarmBot including its position and an optional
webcam stream.`);
export const SENSORS_PANEL =
trim(`This is the sensors panel. Here you can view and manage your
sensors and sensor readings. Click the Read Sensor buttons to read the
current value of your sensors. Create and view historical sensor
readings in the Sensor History section.`);
export const JOBS_AND_LOGS_PANEL =
trim(`Here you can view running and completed jobs as well as log messages.`);
export const PHOTOS_PANEL =
trim(`This is the photos panel. Here you can view and manage all of the
photos of your garden. Additionally, here is where you can calibrate
FarmBot's camera and weed detection settings to fine tune the
performance for your lighting conditions and soil type.`);
export const TOOLS_PANEL =
trim(`This is the tools panel. Here you can view and manage all of the
tools, seed containers, and slots in your garden. Clicking an item will
open up the details panel where you can edit it. Pressing the + buttons
will allow you to add new items.`);
export const MESSAGES_PANEL =
trim(`This is the message center. Here you can view and manage setup
cards and announcements. Dismiss items you are finished with by
pressing the X in the top right of a card. Check back often for new
feature announcements and important information about your FarmBot.`);
export const HELP_PANEL =
trim(`This is the help panel. Here you can browse the documentation or
get support if you need it. Switch between documentation hubs and the
other help resources using the dropdown at the top of the panel.`);
export const SETTINGS_PANEL =
trim(`This is the settings panel. Here you can view and manage all of
your FarmBot and account settings. Refer to the tooltips and
documentation for information about each setting.`);
export const CONNECTIVITY_POPUP =
trim(`This is the connectivity popup. View information
about the connection between your web browser, your FarmBot, and the
FarmBot web app servers. Whenever your FarmBot is online and ready for
action, you will see a green checkmark.`);
export const CURRENT_POSITION =
trim(`This is the current position indicator. FarmBot's current X, Y,
and Z coordinates in millimeters are displayed for quick viewing from
any page in the web app.`);
export const ESTOP_BUTTON =
trim(`This is the E-STOP button, allowing you to emergency stop any
movements and turn off all of FarmBot's peripherals in case something
is going wrong. After E-STOPPING FarmBot, you will need to click the
same button to UNLOCK the device before resuming execution of any
commands.`);
export const ACCOUNT_MENU =
trim(`This is the account menu, providing you with links to other pages
in the app, and for logging out.`);
export const GETTING_STARTED_END =
trim(`Thanks for taking the Getting Started Tour! You're now ready to
dive into the details of each panel and begin planting your first
garden with FarmBot. Check out our other tours for practical
step-by-step help, and refer to our in-depth documentation in case you
get stuck on anything.`);
// Planting a garden
export const PLANTING_A_GARDEN =
trim(`In this tour you'll learn how to add plants to your garden,
create filter-based groups of those plants, and snapshot your garden
layout for future growing seasons. Let's get started!`);
export const PLANT_INVENTORY =
trim(`This is the plants panel. Once you add plants to your garden,
they will be listed here for you to view and manage. To add a plant to
your garden, press the plant + button and then advance the tour.`);
export const CROP_SEARCH =
trim(`This is the crop search panel. Type in a crop name to the search
field, for example "Spinach". We recommend trying generic crop names
rather than specific varietals. Select the best search result and then
advance the tour.`);
export const ADD_PLANTS_TO_MAP =
trim(`This is the crop details panel. Here you can view factual
information about the chosen crop such as the expected spread and
height at maturity. Proceed to the next step of the tour to learn how
to add the crop to your garden.`);
export const CLICK_TO_ADD =
trim(`Click anywhere in the map to add an individual plant. If you are
on a desktop or laptop computer, you may also drag and drop the crop
icon into the map. If you want to make any location adjustments or
delete plants, you can do that in a few steps from now. Ready to add a
lot of plants at once? Go to the next step of the tour!`);
export const GRID_AND_ROW_PLANTING =
trim(`To add a grid or row of plants, press the + GRID button,
enter values into the grid and row planting fields and click PREVIEW.
The previewed plants will show in the map in grayscale. Make adjustments
as necessary and when you are happy with the preview, click SAVE.
Then advance the tour.`);
export const FILLED_PLANT_INVENTORY =
trim(`All of the plants you added to your garden are listed here in the
plants panel. Mousing over a plant will highlight it in the map and
vice versa. Go ahead and click a plant and then advance the tour.`);
export const PLANT_DETAILS =
trim(`This is the plant details panel. Here you can view and edit a
plant's coordinates and status, or delete it entirely.`);
export const ADD_MORE_PLANTS =
trim(`Go ahead and add more plants to your garden. Once you have added
at least two crop types, advance the tour.`);
export const GARDEN_PRE_GROUPS_PANEL =
trim(`Now that you have a garden with a few crops in it. Let's create
groups of plants, where each group contains all of the plants of one
crop type. Advance the tour when you're ready.`);
export const GARDEN_GROUPS_PANEL =
trim(`Groups of plants are listed in the groups section. Once you
create some groups, they will be listed here for you to view and manage.
To make your first group, press the group + button and then advance the
tour.`);
export const GROUP_FILTERS =
trim(`This is the edit group panel. To make a group of all plants of
one crop type, select the crop type you would like to include.
Check that the correct plants are listed in the
Group Members section, then advance the tour.`);
export const SORT_BY =
trim(`When you program your FarmBot to perform an operation on a group
of plants, you may want to control the ordering at which FarmBot visits
each plant in the group. To do this, click the sort icon to open the
sort menu and select one of the available Sort
By methods. Once you have chosen a method, advance the tour.`);
export const FINISH_CREATING_THE_GROUP =
trim(`Give your group a descriptive name such as "All Spinach Plants".
When you are finished editing your group press the back button and
advance the tour.`);
export const ADD_MORE_GROUPS =
trim(`Go ahead and add more groups. It is best to have a group for
every set of plants where you wish to perform the same operation (such
as watering) on each member of the group. Once you have added
additional groups, you are finished with this tour!`);
// Setting up slots
export const SETTING_UP_SLOTS_TOOLS_PANEL =
trim(`This is the tools panel. Here you can add, edit, and view your
FarmBot's tools and seed containers as well the slots they are loaded
into. Mousing over a slot will highlight it in the map and vice versa.
We've already added all of the items included with your FarmBot kit.
Your job now is to input the exact location of the slots corresponding
to where you installed them in real life. Click the first slot in the
list and then advance the tour.`);
export const EDIT_SLOT_PANEL =
trim(`This is the edit slot panel where you will let FarmBot know the
exact X, Y, and Z coordinates it must travel to when mounting and
dismounting tools or picking up seeds from a seed container. Advance
the tour to figure out the coordinates for this first slot.`);
export const EDIT_SLOT_COORDINATES_SETUP_GENESIS =
trim(`In real life, load one of FarmBot's tools (such as the watering
nozzle) into a toolbay slot. Then, using the controls popup, instruct
FarmBot to find the home position.`);
export const EDIT_SLOT_COORDINATES_SETUP_EXPRESS =
trim(`Insert a luer lock needle into the 3-in-1 tool head and place a
seed trough into the gantry-mounted seed trough holder. Then, using the
controls popup, instruct FarmBot to find the home position.`);
export const EDIT_SLOT_COORDINATES_GENESIS =
trim(`Using the manual controls, instruct FarmBot to move towards the
tool and slot. As you get closer, change the MOVE AMOUNT to a smaller
value for finer movements. Your goal is to position the UTM just above
the tool and then descend down onto it (mounting it). Once the UTM has
mounted the tool, click the blue button next to the slot's X, Y, and Z
fields to save FarmBot's current position to the slot.`);
export const EDIT_SLOT_COORDINATES_EXPRESS =
trim(`Using the manual controls, instruct FarmBot to move towards the
seed trough. As you get closer, change the MOVE AMOUNT to a smaller
value for finer movements. Your goal is to position the needle just
above the trough and then descend down into it until the tip of the
needle is 3 to 5mm from the bottom of the trough. Click the blue button
next to the slot's X, Y, and Z fields to save FarmBot's current
position to the slot.`);
export const SETTING_UP_SLOTS_MINOR_ADJUSTMENTS =
trim(`Over time you may need to make minor adjustments to the
coordinates of your slots. At any time you can come back to the edit
slot panel and manually adjust the X, Y, and Z input fields.`);
export const LOADING_SLOTS =
trim(`Once you have input the coordinate locations for every slot,
choose which tool or seed container is loaded into each slot. Remember:
the virtual configuration must always match your real-life
configuration.`);
export const SETTING_UP_SLOTS_CUSTOM_TOOLS =
trim(`If you ever purchase new tools or make your own, add them to the
app by clicking the + tool button. Once the tool has been added, load
it into an available slot to begin using it in your sequences!`);
// Monitoring
export const LOCATION_GRID =
trim(`View FarmBot's current location in the navigation bar.`);
export const VIRTUAL_FARMBOT =
trim(`Or view FarmBot's current location in the virtual garden.`);
export const VIRTUAL_FARMBOT_PROFILE =
trim(`For a profile view of FarmBot's current location in the virtual
garden, open the profile viewer.`);
export const LOGS_TABLE =
trim(`View recent log messages in the logs pop-up.
More detailed log messages can be shown by adjusting filter settings.`);
export const PHOTOS =
trim(`View photos your FarmBot has taken here.`);
}
export namespace SetupWizardContent {
export const INTRO =
trim(`Welcome to the setup wizard. This process will guide you through
the steps necessary to get your FarmBot set up and running. Each step
will include an action to perform and a question about the outcome, which
can be answered yes or no. Answering yes will continue to the next step,
while answering no will display a list of results that can be selected for
specific troubleshooting tips.`);
export const RPI =
trim(`Inspect the ports on the top edge of the Raspberry Pi and select
which Raspberry Pi model is in your FarmBot.`);
export const SEED_DATA =
trim(`Once you make a selection, we'll automatically add some
tools, sensors, peripherals, sequences, and more to get you up
and running faster.`);
export const PRE_POWER_POSITION =
trim(`With the FarmBot still powered off, manually move the gantry,
cross-slide, and Z-axis roughly 150mm away from any of its hardstops.
In other words, position the gantry partway along the tracks, position
the cross-slide partway across the gantry main beam, and position the
Z-axis halfway down.`);
export const PRE_POWER_POSITION_EXPRESS =
trim(`With the FarmBot still powered off, manually move the gantry and
cross-slide roughly 150mm away from the X and Y axis hardstops.
In other words, position the gantry partway along the tracks and position
the cross-slide partway across the gantry main beam. Rotate the
leadscrew by hand to position the Z-axis fully raised up.`);
export const DOWNLOAD_OS =
trim(`Using a desktop computer or laptop, download the latest
FarmBot OS .img file:`);
export const IMAGER =
trim(`Using a desktop computer or laptop, download and install the
official Raspberry Pi Imager program from the Raspberry Pi Foundation.
This is necessary for installing FarmBot OS onto the microSD card in
the next step.`);
export const COMPUTER_SD_CARD_GENESIS =
trim(`Remove the microSD card from the FarmBot's Raspberry Pi.
The card slot is located on the back side of the Raspberry Pi,
on the right-hand edge. Then connect the microSD card to your computer
using a card reader. You may need to use the microSD card to SD card
adapter included with your kit.`);
export const COMPUTER_SD_CARD_EXPRESS =
trim(`Remove the microSD card from the FarmBot's Raspberry Pi.
The card slot is located on the front side of the Raspberry Pi,
on the left-hand edge. Then connect the microSD card to your computer
using a card reader. You may need to use the microSD card to SD card
adapter included with your kit.`);
export const FLASH_SD_CARD =
trim(`Open up the Raspberry Pi Imager program and click \`CHOOSE OS\`.
Then scroll to the bottom of the popup and select **Use custom** *Select a
custom .img file from your computer*. Then select the FarmBot OS \`.img\`
file you downloaded. Click the \`CHOOSE STORAGE\` button and then select
the microSD card (it should show up as a 7.9 GB option). Click \`WRITE\`
and if prompted, give your computer permission to perform this action.`);
export const INSERT_SD_CARD_GENESIS =
trim(`Remove the microSD card from your computer and insert it into
FarmBot's Raspberry Pi. The card slot is located on the back side of
the Raspberry Pi, on the right-hand edge. You do not need to remove the
Raspberry Pi from the electronics box to insert the card; we have left
enough access room.`);
export const INSERT_SD_CARD_EXPRESS =
trim(`Remove the microSD card from your computer and insert it into
FarmBot's Raspberry Pi. The card slot is located on the front side of
the Raspberry Pi, on the left-hand edge.`);
export const OFFLINE =
trim(`Unable to connect to FarmBot. Please reconnect FarmBot to continue.`);
export const CANT_CONNECT =
trim(`I can see the farmbot-xxxx network but my device will not connect`);
export const CANT_CONNECT_TIP =
trim(`Try disabling cellular data or connecting with a different device.`);
export const NO_SETUP_NETWORK =
trim(`Try waiting three minutes from power on. Check the Raspberry
Pi power LED. Check that the SD is fully inserted. Try downloading a new
FarmBot OS image, ensuring that the device model is correct. Try
re-flashing the SD card via Etcher. If possible, ensure line-of-sight
between devices when trying to connect.`);
export const MAP_ORIENTATION =
trim(`Watch the video below showing how to match the virtual FarmBot
map to your real life FarmBot. The relevant controls are available
below the video for your convenience.`);
export const PRESS_RIGHT_JOG_BUTTON =
trim(`Standing from where you will normally view the FarmBot,
**press the right arrow button**.`);
export const PRESS_UP_JOG_BUTTON =
trim(`Standing from where you will normally view the FarmBot,
**press the up arrow button**.`);
export const PRESS_DOWN_JOG_BUTTON =
trim(`Standing from where you will normally view the FarmBot,
**press the z-axis down arrow button**.`);
export const NO_MOTOR_MOVEMENT =
trim(`It made sounds like it was trying to move, but didn't move`);
export const DID_AXIS_MOVE =
trim(`Did FarmBot's {{ axis }}-axis move? (Don't worry about the
direction right now)`);
export const NO_MOTOR_ACTIVITY =
trim(`Check motor cable connections. Try again while observing
electronics box LED activity.`);
export const CONTROLS_VIDEO =
trim(`Watch the video below showing how to match the manual controls to
your real life FarmBot. Once you have finished watching, proceed to the
next setup steps to test and set the controls for each axis.`);
export const FIND_HOME =
trim(`Open the ... menu for the {{ axis }} axis and click **FIND HOME**.`);
export const FIND_HOME_Z_EXPRESS =
trim(`Automatically finding the Z-axis home position is not enabled by
default for Express FarmBots. To manually set the Z home position,
use the manual controls to move the Z-axis to the fully raised position.
If the Z-axis is not fully raised when the FarmBot reaches the Z=0
coordinate, press the E-stop button, rotate the leadscrew by hand to
fully raise the Z-axis, and then Unlock the FarmBot. With the Z-axis
fully raised, open the ... menu for the Z-axis and click **SET HOME**.`);
export const HOME_Z_EXPRESS =
trim(`Have you manually set the Z-axis home position with the Z-axis
fully raised?`);
export const HOME =
trim(`Did FarmBot reach the home position (touching the hardstop) for
this axis and set the coordinate to 0? Note: sometimes after a movement,
FarmBot will settle into place and coordinates may change by +/-0.5mm
from the desired value. If the coordinates are within 1mm of 0, that is
acceptable.`);
export const BOOT_SEQUENCE =
trim(`Select the 'Find Home' sequence in the dropdown. FarmBot will
execute this sequence every time it boots up. You can modify this
sequence or choose a different boot sequence later to have FarmBot
perform different functions when it turns on.`);
export const FIND_LENGTH =
trim(`Did FarmBot move to the end of the axis and then move back to
the home position for this axis?`);
export const FIND_LENGTH_Z_EXPRESS =
trim(`Have you manually set the Z-axis length with the Z-axis fully
lowered and then returned the Z-axis to the home position?`);
export const HOME_AXIS =
trim(`Try using the FIND HOME button a few more times. If FarmBot is
still unable to reach the home position, check the hardware for
resistance. You may also move FarmBot's {{ axis }}-axis with the controls
or manually until the plates hit the hardstop. Then open the ... menu
and click SET HOME.`);
export const MOVEMENTS_VIDEO =
trim(`Watch the video below demonstrating movements along the full
length of the axes. Once you have finished watching, proceed to the
next setup steps to test movements along the full length of each axis.`);
export const X_AXIS_MOVEMENTS =
trim(`Use the manual controls to move FarmBot along the full length of
the X-axis in both directions.`);
export const X_AXIS_MOVEMENTS_QUESTION =
trim(`Is the FarmBot able to move reliably along the full length of the
X-axis in both directions?`);
export const Y_AXIS_MOVEMENTS =
trim(`Use the manual controls to move FarmBot along the full length of
the Y-axis in both directions.`);
export const Y_AXIS_MOVEMENTS_QUESTION =
trim(`Is the FarmBot able to move reliably along the full length of the
Y-axis in both directions?`);
export const Z_AXIS_MOVEMENTS =
trim(`Use the manual controls to move FarmBot along the full length of
the Z-axis in both directions.`);
export const Z_AXIS_MOVEMENTS_QUESTION =
trim(`Is the FarmBot able to move reliably along the full length of the
Z-axis in both directions?`);
export const AXIS_LENGTH =
trim(`Manually enter a value by measuring the usable distance FarmBot
can travel along the axis.`);
export const MOVEMENT_STALLS =
trim(`Inspect the wood raised bed (Express kits) or track extrusions
(Genesis kits) for bumps. Use sand paper to smooth out imperfections.
Check the cable carrier for any snap-in tabs that are not fully snapped
into place. Tabs may be catching on the cable carrier supports or other
parts of the cable carrier.`);
export const MOVEMENT_ALL_X =
trim(`"Break in" the cable carrier, double check belt tension, and
double check the eccentric spacers (Genesis kits only).`);
export const MOVEMENT_ALL_Y_AND_Z =
trim(`"Break in" the cable carrier, double check belt tension, and
double check the eccentric spacers.`);
export const MOVEMENT_SETTINGS_DESCRIPTION =
trim(`It seems like it is trying to move too fast, or doesn't have
enough torque`);
export const MOVEMENT_SETTINGS =
trim(`Watch the video below and make small adjustments to the motor
speed and current settings.`);
export const FIND_AXIS_LENGTH =
trim(`Open the ... menu for the {{ axis }} axis and click **FIND LENGTH**.`);
export const FIND_AXIS_LENGTH_Z_EXPRESS =
trim(`Automatically finding the Z-axis length is not enabled by default
for Express FarmBots. To manually set the Z length, use the manual controls
to move the Z-axis to the fully lowered position. With the Z-axis fully
lowered, open the ... menu for the Z-axis and click **SET LENGTH**.
Then open the ... menu again and click **MOVE TO HOME**.`);
export const TOGGLE_PERIPHERAL =
trim(`Press the **{{ toggle }}** toggle, wait a few seconds, and then press
the toggle again.`);
export const ROTARY_TOOL_WARNING =
trim(`Before attaching the rotary tool or turning it on, ensure that all
hands, feet, hair, and other body parts will be kept away from the tool
and a safe distance will be maintained while the rotary tool is attached.
Be mindful of debris that may be projected and use appropriate
protective equipment. Disconnect the rotary tool when not in use.`);
export const ESTOP_BUTTON =
trim(`Press the physical E-Stop button on top of the electronics box.`);
export const ESTOP_BUTTON_QUESTION =
trim(`Are FarmBot's motors unpowered? (Try moving the Y-axis by hand)`);
export const UNLOCK_BUTTON_BOX =
trim(`Press the physical Unlock button on top of the electronics box.`);
export const UNLOCK_BUTTON_VIRTUAL =
trim(`Press the UNLOCK button below.`);
export const UNLOCK_BUTTON_QUESTION =
trim(`Did FarmBot unlock? (Check the logs or try sending a movement command)`);
export const CUSTOM_BUTTONS =
trim(`Customize which Action or Sequence you want FarmBot to execute
when you press Button 3, 4, or 5 on the electronics box. To start, we
recommend setting Button 5 to the 'Find Home' sequence. You can change
this later from the controls pop-up.`);
export const PROBLEM_GETTING_IMAGE =
trim(`There is a 'camera not detected' or 'problem getting image' error
log`);
export const CAMERA_CALIBRATION_PREPARATION =
trim(`To prepare for camera calibration, move the z-axis all the way up.`);
export const CAMERA_CALIBRATION =
trim(`Camera calibration allows correct photo rotation and placement
in the Farm Designer map. Place the camera calibration card on the soil
underneath the camera with the side shown below face up. The card must
be fully visible to the camera.`);
export const CAMERA_VOLTAGE_LOW =
trim(`Camera voltage may be low. Try a different Raspberry Pi USB
power cable.`);
export const NETWORK_PORTS =
trim(`If you are installing FarmBot at a school or enterprise where the
internet network is managed by an IT department, you must ensure that
certain ports are opened to allow FarmBot to fully connect to the web
app. If you are installing FarmBot in one of these locations, have your
IT department review the following help page to ensure FarmBot will be
able to fully connect once configured.`);
export const NETWORK_PORTS_QUESTION =
trim(`Has your IT department confirmed that the necessary ports are
opened or are you installing FarmBot at home?`);
export const ETHERNET_OPTION =
trim(`Most people connect their FarmBot to the internet over WiFi,
though you may optionally use a hardwired ethernet connection. If you
would like to use an ethernet connection, simply connect an ethernet
cable between your WiFi router and the Raspberry Pi.`);
export const ETHERNET_OPTION_QUESTION =
trim(`Are you planning on using WiFi or have you connected the ethernet
cable?`);
export const CONFIGURATOR_CONTENT =
trim(`Using another device, search for and connect to the
\`farmbot-xxxx\` WiFi network`);
export const CONFIGURATOR_CONNECTION_PROMPT =
trim(`Is your phone or computer connected to the FarmBot WiFi network?`);
export const CHECK_CAMERA_CABLE =
trim(`Check that the camera is plugged in correctly to either a
Raspberry Pi USB port (Express v1.0 kits and all Genesis kits) or into
one of the vertically oriented USB ports on the Farmduino (Express v1.1+
kits). For cameras with a 90 degree intermediary connector at the
cross-slide, ensure the connectors are fully connected.`);
export const BLACK_IMAGE =
trim(`Ensure that the camera lens is not covered and there is adequate
lighting. Try unplugging the camera and plugging it back in.`);
export const CAMERA_REPLACEMENT =
trim(`If the problem persists after performing the recommendations
above, you may have a defective camera. You can request a free
replacement`);
export const CALIBRATION_OBJECT_DETECTION =
trim(`Make sure the calibration card has been placed flat on the soil
surface and is fully and clearly visible to the camera.
The card must not be warped, bent, overexposed, or obscured in the
above image. Lighting may be improved by shading the card from direct
sunlight, trying a different time of day, or using FarmBot's lights in
the evening or at night. There must be good contrast between the white
dots and black calibration card background for calibration to
complete successfully. Trying calibration in a different location with
fewer distractions in the area surrounding the card may also help.`);
export const RED_DOTS =
trim(`Try an alternate calibration method. Two red objects spaced 100mm
apart can be used in place of the card.`);
export const CAMERA_ALIGNMENT =
trim(`Find a detail in the image at the soil level where the coordinates
are known (for example, a spot watered by FarmBot), and compare the known
coordinates against the location for the detail shown in the map.`);
export const CHECK_TOOL_CONNECTIONS =
trim(`Check the UTM to tool electrical connections. Ensure pin jumpers
are installed across the Farmduino UTM pins. Brush the top of the tool
electrical connection screws and UTM pogo pins with a cloth to clean
the surface and ensure good electrical conductivity. If a connection
still cannot be made, try loosening and tightening the tool electrical
connection M3 screws.`);
export const READ_SOIL_SENSOR =
trim(`Attach the soil sensor tool to the UTM and press the READ SENSOR
for the SOIL MOISTURE sensor.`);
export const PROVIDE_A_DESCRIPTION_PART_1 =
trim(`If you already tried the troubleshooting tips above and looked
through the`);
export const PROVIDE_A_DESCRIPTION_PART_3 =
trim(`for help, please provide a detailed description of what you need
help with and we'll get in touch.`);
}
export enum DeviceSetting {
axisHeadingLabels = ``,
// FarmBot
farmbotSettings = `FarmBot`,
name = `name`,
orderNumber = `Order Number`,
timezone = `timezone`,
time_zone = `time zone`,
farmbotLocation = `Location`,
indoor = `indoor`,
osUpdateTime = `update time`,
osAutoUpdate = `auto update`,
farmbotOS = `Farmbot OS`,
bootSequence = `Boot Sequence`,
firmware = `Firmware`,
firmwarePath = `Firmware path`,
flashFirmware = `Flash firmware`,
raspberryPiModel = `Raspberry Pi model`,
// Power and Reset
powerAndReset = `Power and Reset`,
restartFirmware = `Restart Firmware`,
restartFarmbot = `Restart Farmbot`,
shutdownFarmbot = `Shutdown Farmbot`,
softReset = `Soft Reset`,
hardReset = `Hard Reset`,
changeOwnership = `Change Ownership`,
// Axes
axisSettings = `Axes`,
findHome = `Find Home`,
setHome = `Set Home`,
findHomeOnBoot = `Find Home on Boot`,
stopAtHome = `Stop at Home`,
stopAtMax = `Stop at Max`,
negativeCoordinatesOnly = `Negative Coordinates Only`,
findAxisLength = `Find axis length`,
setAxisLength = `Set axis length`,
axisLength = `Axis Length (mm)`,
gantryHeight = `Gantry Height`,
safeHeight = `Safe Height`,
fallbackSoilHeight = `Fallback Soil Height`,
// Motors
motors = `Motors`,
maxSpeed = `Max Speed (mm/s)`,
maxSpeedTowardHome = `Max Speed toward home (mm/s)`,
homingSpeed = `Homing Speed (mm/s)`,
minimumSpeed = `Minimum Speed (mm/s)`,
minimumSpeedTowardHome = `Minimum Speed toward home (mm/s)`,
accelerateFor = `Accelerate for (mm)`,
accelerateForTowardHome = `Accelerate for toward home (mm)`,
stepsPerMm = `Steps per MM`,
microstepsPerStep = `Microsteps per step`,
alwaysPowerMotors = `Always Power Motors`,
invertMotors = `Invert Motors`,
motorCurrent = `Motor Current (%)`,
quietMode = `Quiet Mode`,
enable2ndXMotor = `Enable 2nd X Motor`,
invert2ndXMotor = `Invert 2nd X Motor`,
// Encoders / Stall Detection
encoders = `Encoders`,
stallDetection = `Stall Detection`,
stallDetectionNote = `Stall Detection note`,
enableEncoders = `Enable Encoders`,
enableStallDetection = `Enable Stall Detection`,
stallSensitivity = `Stall Sensitivity`,
useEncodersForPositioning = `Use Encoders for Positioning`,
invertEncoders = `Invert Encoders`,
maxMissedSteps = `Max Missed Steps`,
maxMotorLoad = `Max Motor Load`,
missedStepDecay = `Missed Step Decay`,
gracePeriod = `Grace Period`,
encoderScaling = `Encoder Scaling`,
// Limit Switches
limitSwitchSettings = `Limit Switches`,
limitSwitchesWarning = `Limit switches warning`,
enableLimitSwitches = `Enable limit switches`,
swapLimitSwitches = `Swap limit switches`,
invertLimitSwitches = `Invert limit switches`,
// Error Handling
errorHandling = `Error Handling`,
timeoutAfter = `Timeout after (seconds)`,
maxRetries = `Max Retries`,
calibrationRetries = `Calibration retries`,
calibrationTotalRetries = `Calibration total retries`,
calibrationRetryResetDistance = `Calibration retry reset distance (mm)`,
estopOnMovementError = `E-Stop on Movement Error`,
// Pin Bindings
pinBindings = `Pin Bindings`,
stockPinBindings = `Stock pin bindings`,
savedPinBindings = `Saved pin bindings`,
addNewPinBinding = `Add new pin binding`,
// Pin Guard
pinGuardLabels = ``,
pinGuardTitles = `pin timeout (sec) to state`,
pinGuard = `Pin Guard`,
pinGuard1 = `Pin Guard 1`,
pinGuard2 = `Pin Guard 2`,
pinGuard3 = `Pin Guard 3`,
pinGuard4 = `Pin Guard 4`,
pinGuard5 = `Pin Guard 5`,
// Pin Reporting
pinReporting = `Pin Reporting`,
pinReporting1 = `Pin Reporting 1`,
pinReporting2 = `Pin Reporting 2`,
// Parameter Management
parameterManagement = `Parameter Management`,
paramLoadProgress = `Parameter load progress`,
paramResend = `Resend parameters`,
exportParameters = `Export parameters`,
importParameters = `Import parameters`,
highlightModifiedSettings = `Highlight modified settings`,
showAdvancedSettings = `Show advanced settings`,
resetHardwareParams = `Reset hardware parameters`,
// Farm Designer
farmDesigner = `Farm Designer`,
animations = `Plant animations`,
trail = `Trail`,
mapMissedSteps = `FarmBot motor load`,
dynamicMap = `Dynamic map size`,
mapSize = `Map size`,
rotateMap = `Rotate map`,
mapOrigin = `Map origin`,
cropMapImages = `Crop map images`,
clipPhotosOutOfBounds = `Clip photos out of bounds`,
cameraView = `Camera view`,
uncroppedCameraView = `Uncropped Camera view`,
confirmPlantDeletion = `Confirm plant deletion`,
defaultPlantDepth = `Default plant depth (mm)`,
// Account
accountSettings = `Account`,
accountName = `Your Name`,
accountEmail = `Email`,
changePassword = `Change password`,
language = `Language`,
resetAccount = `Reset account`,
deleteAccount = `Delete account`,
exportAccountData = `Export data`,
otherSettings = `Other`,
customSettings = `Custom Settings`,
envEditor = `ENV Editor`,
// Map
showPlants = `Plants`,
showPlantsMapLayer = `Show Plants Map Layer`,
showPoints = `Points`,
showPointsMapLayer = `Show Points Map Layer`,
showSoil = `Soil`,
showSoilInterpolationMapLayer = `Show Soil Interpolation Map Layer`,
showWeeds = `Weeds`,
showWeedsMapLayer = `Show Weeds Map Layer`,
showRemovedWeeds = `Show removed`,
showRemovedWeedsMapLayer = `Show Removed Weeds Map Layer`,
showSpread = `Spread`,
showSpreadMapLayer = `Show Spread Map Layer`,
showFarmbot = `FarmBot`,
showFarmbotMapLayer = `Show FarmBot Map Layer`,
showPhotos = `Photos`,
showPhotosMapLayer = `Show Photos Map Layer`,
showAreas = `Areas`,
showAreasMapLayer = `Show Areas Map Layer`,
showReadings = `Readings`,
showReadingsMapLayer = `Show Readings Map Layer`,
showMoisture = `Moisture`,
showMoistureInterpolationMapLayer = `Show Moisture Interpolation Map Layer`,
// Controls
invertJogButtonXAxis = `X Axis`,
invertXAxisJogButton = `Invert X Axis Jog Button`,
invertJogButtonYAxis = `Y Axis`,
invertYAxisJogButton = `Invert Y Axis Jog Button`,
invertJogButtonZAxis = `Z Axis`,
invertZAxisJogButton = `Invert Z Axis Jog Button`,
displayScaledEncoderPosition = `Scaled encoder position`,
displayRawEncoderPosition = `Raw encoder position`,
swapJogButtonsXAndYAxis = `x and y axis`,
swapXAndYAxisJogButtons = `swap x and y axis jog buttons`,
showMotorPositionPlot = `motor position`,
showMotorLoadPlot = `motor load`,
showMotorPositionPlotDisplay = `show motor position plot display`,
showMotorLoadPlotDisplay = `show motor load plot display`,
// Sequences
confirmStepDeletion = `Confirm step deletion`,
confirmSequenceDeletion = `Confirm sequence deletion`,
showPins = `Show pins`,
openOptionsByDefault = `Open options by default`,
discardUnsavedSequenceChanges = `Discard unsaved sequence changes`,
viewCeleryScript = `View CeleryScript`,
// Logs
logFilterLevelSuccess = `show success log messages`,
logFilterLevelBusy = `show busy log messages`,
logFilterLevelWarn = `show warn log messages`,
logFilterLevelError = `show error log messages`,
logFilterLevelInfo = `show info log messages`,
logFilterLevelFun = `show fun log messages`,
logFilterLevelDebug = `show debug log messages`,
logFilterLevelAssertion = `show assertion log messages`,
sequenceBeginLogs = `Begin`,
enableSequenceBeginLogs = `Enable sequence begin logs`,
sequenceStepLogs = `Steps`,
enableSequenceStepLogs = `Enable sequence step logs`,
sequenceCompleteLogs = `Complete`,
enableSequenceCompleteLogs = `Enable sequence complete logs`,
// App
internationalizeWebApp = `Internationalize Web App`,
use24hourTimeFormat = `Use 24-hour time format`,
showSecondsInTime = `Show seconds in time`,
hideWebcamWidget = `Hide Webcam widget`,
hideSensorsPanel = `Hide Sensors panel`,
enable3dElectronicsBox = `Enable 3D electronics box`,
readSpeakLogsInBrowser = `Read speak logs in browser`,
landingPage = `Landing page`,
browserFarmbotActivityBeep = `Browser FarmBot activity beep`,
discardUnsavedChanges = `Discard Unsaved Changes`,
confirmEmergencyUnlock = `Confirm emergency unlock`,
userInterfaceReadOnlyMode = `User Interface Read Only Mode`,
// Photos: Filters
alwaysHighlightCurrentPhotoInMap = `always highlight current photo in map`,
onlyShowCurrentPhotoInMap = `only show current photo in map`,
showTakePhotoImages = `show take photo images`,
showCalibrationImages = `show calibration images`,
showWeedDetectorImages = `show weed detector images`,
showSoilHeightImages = `show soil height images`,
// Photos: Camera settings
camera = `camera`,
imageResolution = `image resolution`,
rotateDuringCapture = `rotate during capture`,
// Photos: Camera calibration
useAlternativeMethod = `use alternative method`,
calibrationHue = `calibration hue`,
calibrationSaturation = `calibration saturation`,
calibrationValue = `calibration value`,
calibrationBlur = `calibration blur`,
calibrationMorph = `calibration morph`,
calibrationIterations = `calibration iterations`,
invertHueRangeSelection = `invert hue range selection`,
calibrationObjectSeparation = `calibration object separation`,
calibrationObjectSeparationAlongAxis = `calibration object separation along axis`,
cameraOffsetX = `camera offset x`,
cameraOffsetY = `camera offset y`,
originLocationInImage = `origin location in image`,
pixelCoordinateScale = `pixel coordinate scale`,
cameraRotation = `camera rotation`,
// Photos: Weed detection
detectionHue = `detection hue`,
detectionSaturation = `detection saturation`,
detectionValue = `detection value`,
detectionBlur = `detection blur`,
detectionMorph = `detection morph`,
detectionIterations = `detection iterations`,
saveDetectedPlants = `save detected plants`,
ignoreDetectionsOutOfBounds = `ignore detections out of bounds`,
minimumWeedSize = `minimum weed size`,
maximumWeedSize = `maximum weed size`,
}
export namespace DiagnosticMessages {
export const OK = trim(`All systems nominal.`);
export const MISC = trim(`Some other issue is preventing FarmBot from
working. Please see the table above for more information.`);
export const TOTAL_BREAKAGE = trim(`There is no access to FarmBot or the
message broker. This is usually caused by outdated browsers
(Internet Explorer) or firewalls that block WebSockets on port 3002.`);
export const REMOTE_FIREWALL = trim(`FarmBot and the browser are both
connected to the internet (or have been recently). Try rebooting FarmBot
and refreshing the browser. If the issue persists, something may be
preventing FarmBot from accessing the message broker (used to communicate
with your web browser in real-time). If you are on a company or school
network, a firewall may be blocking port 5672 or port 8883. Ensure that
the blue LED communications light on the FarmBot electronics box is
illuminated.`);
export const WIFI_OR_CONFIG = trim(`Your browser is connected correctly,
but we have no recent record of FarmBot connecting to the internet.
This usually happens because of poor WiFi connectivity in the garden,
a bad password during configuration, a very long power outage, or
blocked ports on FarmBot's local network. Please refer IT staff to:`);
export const NO_WS_AVAILABLE = trim(`You are either offline, using a web
browser that does not support WebSockets, or are behind a firewall that
blocks port 3002. Do not attempt to debug FarmBot hardware until you solve
this issue first. You will not be able to troubleshoot hardware issues
without a reliable browser and internet connection.`);
export const INACTIVE = trim(`FarmBot and the browser both have internet
connectivity, but we haven't seen any activity from FarmBot on the Web
App in a while. This could mean that FarmBot has not synced in a while,
which might not be a problem. If you are experiencing usability issues,
however, it could be a sign of HTTP blockage on FarmBot's local internet
connection.`);
export const ARDUINO_DISCONNECTED = trim(`Farmduino firmware is missing.
Press the yellow FLASH FIRMWARE button to flash the firmware to your
FarmBot. Verify FIRMWARE selection matches FarmBot kit version and
check the USB cable between the Raspberry Pi and the Farmduino.
Reboot FarmBot after a reconnection. If the issue persists,
reconfiguration of FarmBot OS may be necessary.`);
}
export enum Actions {
// Resources
DESTROY_RESOURCE_START = "DESTROY_RESOURCE_START",
DESTROY_RESOURCE_OK = "DESTROY_RESOURCE_OK",
INIT_RESOURCE = "INIT_RESOURCE",
BATCH_INIT = "BATCH_INIT",
SAVE_RESOURCE_OK = "SAVE_RESOURCE_OK",
EDIT_RESOURCE = "EDIT_RESOURCE",
OVERWRITE_RESOURCE = "OVERWRITE_RESOURCE",
SAVE_RESOURCE_START = "SAVE_RESOURCE_START",
RESOURCE_READY = "RESOURCE_READY",
_RESOURCE_NO = "_RESOURCE_NO",
REFRESH_RESOURCE_START = "REFRESH_RESOURCE_START",
REFRESH_RESOURCE_OK = "REFRESH_RESOURCE_OK",
REFRESH_RESOURCE_NO = "REFRESH_RESOURCE_NO",
DELETE_POINT_OK = "DELETE_POINT_OK",
// Auth
REPLACE_TOKEN = "REPLACE_TOKEN",
// Config
CHANGE_API_PORT = "CHANGE_API_PORT",
CHANGE_API_HOST = "CHANGE_API_HOST",
LOGOUT = "LOGOUT",
// App
TOGGLE_PLANTS_PANEL_OPTION = "TOGGLE_PLANTS_PANEL_OPTION",
TOGGLE_WEEDS_PANEL_OPTION = "TOGGLE_WEEDS_PANEL_OPTION",
TOGGLE_POINTS_PANEL_OPTION = "TOGGLE_POINTS_PANEL_OPTION",
TOGGLE_SETTINGS_PANEL_OPTION = "TOGGLE_SETTINGS_PANEL_OPTION",
TOGGLE_CURVES_PANEL_OPTION = "TOGGLE_CURVES_PANEL_OPTION",
TOGGLE_SEQUENCES_PANEL_OPTION = "TOGGLE_SEQUENCES_PANEL_OPTION",
SET_METRIC_PANEL_OPTION = "SET_METRIC_PANEL_OPTION",
BULK_TOGGLE_SETTINGS_PANEL = "BULK_TOGGLE_SETTINGS_PANEL",
SET_CONTROLS_PANEL_OPTION = "SET_CONTROLS_PANEL_OPTION",
SET_JOBS_PANEL_OPTION = "SET_JOBS_PANEL_OPTION",
TOGGLE_POPUP = "TOGGLE_POPUP",
OPEN_POPUP = "OPEN_POPUP",
CLOSE_POPUP = "CLOSE_POPUP",
TOGGLE_HOTKEY_GUIDE = "TOGGLE_HOTKEY_GUIDE",
// Devices
CHANGE_STEP_SIZE = "CHANGE_STEP_SIZE",
SETTING_UPDATE_START = "SETTING_UPDATE_START",
SETTING_UPDATE_END = "SETTING_UPDATE_END",
STATUS_UPDATE = "STATUS_UPDATE",
FETCH_OS_UPDATE_INFO_OK = "FETCH_OS_UPDATE_INFO_OK",
FETCH_MIN_OS_FEATURE_INFO_OK = "FETCH_MIN_OS_FEATURE_INFO_OK",
FETCH_MIN_OS_FEATURE_INFO_ERROR = "FETCH_MIN_OS_FEATURE_INFO_ERROR",
FETCH_OS_RELEASE_NOTES_OK = "FETCH_OS_RELEASE_NOTES_OK",
FETCH_OS_RELEASE_NOTES_ERROR = "FETCH_OS_RELEASE_NOTES_ERROR",
STASH_STATUS = "STASH_STATUS",
SET_NEEDS_VERSION_CHECK = "SET_NEEDS_VERSION_CHECK",
SET_MALFORMED_NOTIFICATION_SENT = "SET_MALFORMED_NOTIFICATION_SENT",
// Draggable
PUT_DATA_XFER = "PUT_DATA_XFER",
DROP_DATA_XFER = "DROP_DATA_XFER",
// Designer
SEARCH_QUERY_CHANGE = "SEARCH_QUERY_CHANGE",
SELECT_POINT = "SELECT_POINT",
SET_SELECTION_POINT_TYPE = "SET_SELECTION_POINT_TYPE",
TOGGLE_HOVERED_PLANT = "TOGGLE_HOVERED_PLANT",
TOGGLE_HOVERED_POINT = "TOGGLE_HOVERED_POINT",
TOGGLE_HOVERED_SPREAD = "TOGGLE_HOVERED_SPREAD",
HOVER_SENSOR_READING = "HOVER_SENSOR_READING",
HOVER_IMAGE = "HOVER_IMAGE",
HOVER_PLANT_LIST_ITEM = "HOVER_PLANT_LIST_ITEM",
HOVER_TOOL_SLOT = "HOVER_TOOL_SLOT",
OF_SEARCH_RESULTS_START = "OF_SEARCH_RESULTS_START",
OF_SEARCH_RESULTS_OK = "OF_SEARCH_RESULTS_OK",
OF_SEARCH_RESULTS_NO = "OF_SEARCH_RESULTS_NO",
SET_COMPANION_INDEX = "SET_COMPANION_INDEX",
SET_PLANT_TYPE_CHANGE_ID = "SET_PLANT_TYPE_CHANGE_ID",
SET_SLUG_BULK = "SET_SLUG_BULK",
CHOOSE_LOCATION = "CHOOSE_LOCATION",
SET_DRAWN_POINT_DATA = "SET_DRAWN_POINT_DATA",
SET_DRAWN_WEED_DATA = "SET_DRAWN_WEED_DATA",
CHOOSE_SAVED_GARDEN = "CHOOSE_SAVED_GARDEN",
TRY_SORT_TYPE = "TRY_SORT_TYPE",
SET_SETTINGS_SEARCH_TERM = "SET_SETTINGS_SEARCH_TERM",
EDIT_GROUP_AREA_IN_MAP = "EDIT_GROUP_AREA_IN_MAP",
VISUALIZE_SEQUENCE = "VISUALIZE_SEQUENCE",
HOVER_SEQUENCE_STEP = "HOVER_SEQUENCE_STEP",
HIDE_MAP_IMAGE = "HIDE_MAP_IMAGE",
UN_HIDE_MAP_IMAGE = "UN_HIDE_MAP_IMAGE",
SET_SHOWN_MAP_IMAGES = "SET_SHOWN_MAP_IMAGES",
TOGGLE_SHOWN_IMAGES_ONLY = "TOGGLE_SHOWN_IMAGES_ONLY",
TOGGLE_ALWAYS_HIGHLIGHT_IMAGE = "TOGGLE_ALWAYS_HIGHLIGHT_IMAGE",
TOGGLE_SHOW_PHOTO_IMAGES = "TOGGLE_SHOW_PHOTO_IMAGES",
TOGGLE_SHOW_CALIBRATION_IMAGES = "TOGGLE_SHOW_CALIBRATION_IMAGES",
TOGGLE_SHOW_DETECTION_IMAGES = "TOGGLE_SHOW_DETECTION_IMAGES",
TOGGLE_SHOW_HEIGHT_IMAGES = "TOGGLE_SHOW_HEIGHT_IMAGES",
HIGHLIGHT_MAP_IMAGE = "HIGHLIGHT_MAP_IMAGE",
SHOW_CAMERA_VIEW_POINTS = "SHOW_CAMERA_VIEW_POINTS",
TOGGLE_GRID_ID = "TOGGLE_GRID_ID",
SET_GRID_START = "SET_GRID_START",
TOGGLE_SOIL_HEIGHT_LABELS = "TOGGLE_SOIL_HEIGHT_LABELS",
SET_PROFILE_OPEN = "SET_PROFILE_OPEN",
SET_PROFILE_AXIS = "SET_PROFILE_AXIS",
SET_PROFILE_POSITION = "SET_PROFILE_POSITION",
SET_PROFILE_WIDTH = "SET_PROFILE_WIDTH",
SET_PROFILE_FOLLOW_BOT = "SET_PROFILE_FOLLOW_BOT",
SET_CROP_WATER_CURVE_ID = "SET_CROP_WATER_CURVE_ID",
SET_CROP_SPREAD_CURVE_ID = "SET_CROP_SPREAD_CURVE_ID",
SET_CROP_HEIGHT_CURVE_ID = "SET_CROP_HEIGHT_CURVE_ID",
SET_CROP_STAGE = "SET_CROP_STAGE",
SET_CROP_PLANTED_AT = "SET_CROP_PLANTED_AT",
// Regimens
PUSH_WEEK = "PUSH_WEEK",
POP_WEEK = "POP_WEEK",
DESELECT_ALL_DAYS = "DESELECT_ALL_DAYS",
SELECT_ALL_DAYS = "SELECT_ALL_DAYS",
TOGGLE_DAY = "TOGGLE_DAY",
SELECT_REGIMEN = "SELECT_REGIMEN",
SET_SEQUENCE = "SET_SEQUENCE",
SET_TIME_OFFSET = "SET_TIME_OFFSET",
SET_SCHEDULER_STATE = "SET_SCHEDULER_STATE",
// Sequences
SELECT_SEQUENCE = "SELECT_SEQUENCE",
SET_SEQUENCE_POPUP_STATE = "SET_SEQUENCE_POPUP_STATE",
SET_SEQUENCE_STEP_POSITION = "SET_SEQUENCE_STEP_POSITION",
// Photos
SELECT_IMAGE = "SELECT_IMAGE",
SET_IMAGE_SIZE = "SET_IMAGE_SIZE",
TOGGLE_PHOTOS_PANEL_OPTION = "TOGGLE_PHOTOS_PANEL_OPTION",
BULK_TOGGLE_PHOTOS_PANEL = "BULK_TOGGLE_PHOTOS_PANEL",
// Farmware
SELECT_FARMWARE = "SELECT_FARMWARE",
FETCH_FIRST_PARTY_FARMWARE_NAMES_OK = "FETCH_FIRST_PARTY_FARMWARE_NAMES_OK",
SET_FARMWARE_INFO_STATE = "SET_FARMWARE_INFO_STATE",
// App
SET_TOUR = "SET_TOUR",
SET_TOUR_STEP = "SET_TOUR_STEP",
CREATE_TOAST = "CREATE_TOAST",
REMOVE_TOAST = "REMOVE_TOAST",
START_MOVEMENT = "START_MOVEMENT",
// Network
NETWORK_EDGE_CHANGE = "NETWORK_EDGE_CHANGE",
SET_CONSISTENCY = "SET_CONSISTENCY",
PING_START = "PING_START",
PING_OK = "PING_OK",
PING_NO = "PING_NO",
CLEAR_PINGS = "CLEAR_PINGS",
// Sequence Folders
FOLDER_TOGGLE = "FOLDER_TOGGLE",
FOLDER_TOGGLE_ALL = "FOLDER_TOGGLE_ALL",
FOLDER_TOGGLE_EDIT = "FOLDER_TOGGLE_EDIT",
FOLDER_SEARCH = "FOLDER_SEARCH"
}