Block has too many lines. [50/25] Open
describe UserPolicy do
subject { UserPolicy }
let (:current_user) { FactoryBot.create :user }
let (:other_user) { FactoryBot.create :user }
- Read upRead up
- Exclude checks
This cop checks if the length of a block exceeds some maximum value. Comment lines can optionally be ignored. The maximum allowed length is configurable. The cop can be configured to ignore blocks passed to certain methods.
Similar blocks of code found in 3 locations. Consider refactoring. Open
permissions :show? do
it 'denies access if viewed user is private' do
expect(UserPolicy).not_to permit(current_user, private_user)
end
- Read upRead up
Duplicated Code
Duplicated code can lead to software that is hard to understand and difficult to change. The Don't Repeat Yourself (DRY) principle states:
Every piece of knowledge must have a single, unambiguous, authoritative representation within a system.
When you violate DRY, bugs and maintenance problems are sure to follow. Duplicated code has a tendency to both continue to replicate and also to diverge (leaving bugs as two similar implementations differ in subtle ways).
Tuning
This issue has a mass of 31.
We set useful threshold defaults for the languages we support but you may want to adjust these settings based on your project guidelines.
The threshold configuration represents the minimum mass a code block must have to be analyzed for duplication. The lower the threshold, the more fine-grained the comparison.
If the engine is too easily reporting duplication, try raising the threshold. If you suspect that the engine isn't catching enough duplication, try lowering the threshold. The best setting tends to differ from language to language.
See codeclimate-duplication
's documentation for more information about tuning the mass threshold in your .codeclimate.yml
.
Refactorings
- Extract Method
- Extract Class
- Form Template Method
- Introduce Null Object
- Pull Up Method
- Pull Up Field
- Substitute Algorithm
Further Reading
- Don't Repeat Yourself on the C2 Wiki
- Duplicated Code on SourceMaking
- Refactoring: Improving the Design of Existing Code by Martin Fowler. Duplicated Code, p76
Similar blocks of code found in 3 locations. Consider refactoring. Open
permissions :edit? do
it 'denies edit if viewed user is not current user' do
expect(UserPolicy).not_to permit(current_user, other_user)
end
it 'grants edit if user is current user' do
- Read upRead up
Duplicated Code
Duplicated code can lead to software that is hard to understand and difficult to change. The Don't Repeat Yourself (DRY) principle states:
Every piece of knowledge must have a single, unambiguous, authoritative representation within a system.
When you violate DRY, bugs and maintenance problems are sure to follow. Duplicated code has a tendency to both continue to replicate and also to diverge (leaving bugs as two similar implementations differ in subtle ways).
Tuning
This issue has a mass of 31.
We set useful threshold defaults for the languages we support but you may want to adjust these settings based on your project guidelines.
The threshold configuration represents the minimum mass a code block must have to be analyzed for duplication. The lower the threshold, the more fine-grained the comparison.
If the engine is too easily reporting duplication, try raising the threshold. If you suspect that the engine isn't catching enough duplication, try lowering the threshold. The best setting tends to differ from language to language.
See codeclimate-duplication
's documentation for more information about tuning the mass threshold in your .codeclimate.yml
.
Refactorings
- Extract Method
- Extract Class
- Form Template Method
- Introduce Null Object
- Pull Up Method
- Pull Up Field
- Substitute Algorithm
Further Reading
- Don't Repeat Yourself on the C2 Wiki
- Duplicated Code on SourceMaking
- Refactoring: Improving the Design of Existing Code by Martin Fowler. Duplicated Code, p76
Similar blocks of code found in 3 locations. Consider refactoring. Open
permissions :update? do
it 'denies updating if viewed user is not current user' do
expect(UserPolicy).not_to permit(current_user, other_user)
end
it 'grants update if user is current user' do
- Read upRead up
Duplicated Code
Duplicated code can lead to software that is hard to understand and difficult to change. The Don't Repeat Yourself (DRY) principle states:
Every piece of knowledge must have a single, unambiguous, authoritative representation within a system.
When you violate DRY, bugs and maintenance problems are sure to follow. Duplicated code has a tendency to both continue to replicate and also to diverge (leaving bugs as two similar implementations differ in subtle ways).
Tuning
This issue has a mass of 31.
We set useful threshold defaults for the languages we support but you may want to adjust these settings based on your project guidelines.
The threshold configuration represents the minimum mass a code block must have to be analyzed for duplication. The lower the threshold, the more fine-grained the comparison.
If the engine is too easily reporting duplication, try raising the threshold. If you suspect that the engine isn't catching enough duplication, try lowering the threshold. The best setting tends to differ from language to language.
See codeclimate-duplication
's documentation for more information about tuning the mass threshold in your .codeclimate.yml
.
Refactorings
- Extract Method
- Extract Class
- Form Template Method
- Introduce Null Object
- Pull Up Method
- Pull Up Field
- Substitute Algorithm
Further Reading
- Don't Repeat Yourself on the C2 Wiki
- Duplicated Code on SourceMaking
- Refactoring: Improving the Design of Existing Code by Martin Fowler. Duplicated Code, p76
(...)
interpreted as grouped expression. Open
let (:other_user) { FactoryBot.create :user }
- Read upRead up
- Exclude checks
Checks for space between the name of a called method and a left parenthesis.
Example:
# bad
do_something (foo)
# good
do_something(foo)
do_something (2 + 3) * 4
do_something (foo * bar).baz
Space missing inside }. Open
let (:private_user) { FactoryBot.create :user, is_private: true}
- Read upRead up
- Exclude checks
Checks that block braces have or don't have surrounding space inside them on configuration. For blocks taking parameters, it checks that the left brace has or doesn't have trailing space depending on configuration.
Example: EnforcedStyle: space (default)
# The `space` style enforces that block braces have
# surrounding space.
# bad
some_array.each {puts e}
# good
some_array.each { puts e }
Example: EnforcedStyle: no_space
# The `no_space` style enforces that block braces don't
# have surrounding space.
# bad
some_array.each { puts e }
# good
some_array.each {puts e}
Example: EnforcedStyleForEmptyBraces: no_space (default)
# The `no_space` EnforcedStyleForEmptyBraces style enforces that
# block braces don't have a space in between when empty.
# bad
some_array.each { }
some_array.each { }
some_array.each { }
# good
some_array.each {}
Example: EnforcedStyleForEmptyBraces: space
# The `space` EnforcedStyleForEmptyBraces style enforces that
# block braces have at least a space in between when empty.
# bad
some_array.each {}
# good
some_array.each { }
some_array.each { }
some_array.each { }
Example: SpaceBeforeBlockParameters: true (default)
# The SpaceBeforeBlockParameters style set to `true` enforces that
# there is a space between `{` and `|`. Overrides `EnforcedStyle`
# if there is a conflict.
# bad
[1, 2, 3].each {|n| n * 2 }
# good
[1, 2, 3].each { |n| n * 2 }
Example: SpaceBeforeBlockParameters: false
# The SpaceBeforeBlockParameters style set to `false` enforces that
# there is no space between `{` and `|`. Overrides `EnforcedStyle`
# if there is a conflict.
# bad
[1, 2, 3].each { |n| n * 2 }
# good
[1, 2, 3].each {|n| n * 2 }
(...)
interpreted as grouped expression. Open
let (:private_user) { FactoryBot.create :user, is_private: true}
- Read upRead up
- Exclude checks
Checks for space between the name of a called method and a left parenthesis.
Example:
# bad
do_something (foo)
# good
do_something(foo)
do_something (2 + 3) * 4
do_something (foo * bar).baz
(...)
interpreted as grouped expression. Open
let (:admin) { FactoryBot.create :user, admin: true }
- Read upRead up
- Exclude checks
Checks for space between the name of a called method and a left parenthesis.
Example:
# bad
do_something (foo)
# good
do_something(foo)
do_something (2 + 3) * 4
do_something (foo * bar).baz
(...)
interpreted as grouped expression. Open
let (:current_user) { FactoryBot.create :user }
- Read upRead up
- Exclude checks
Checks for space between the name of a called method and a left parenthesis.
Example:
# bad
do_something (foo)
# good
do_something(foo)
do_something (2 + 3) * 4
do_something (foo * bar).baz
Prefer single-quoted strings when you don't need string interpolation or special symbols. Open
it "should return all users on index when current_user is admin" do
- Read upRead up
- Exclude checks
Checks if uses of quotes match the configured preference.
Example: EnforcedStyle: single_quotes (default)
# bad
"No special symbols"
"No string interpolation"
"Just text"
# good
'No special symbols'
'No string interpolation'
'Just text'
"Wait! What's #{this}!"
Example: EnforcedStyle: double_quotes
# bad
'Just some text'
'No special chars or interpolation'
# good
"Just some text"
"No special chars or interpolation"
"Every string in #{project} uses double_quotes"
Prefer single-quoted strings when you don't need string interpolation or special symbols. Open
it "should only return users on index that are public" do
- Read upRead up
- Exclude checks
Checks if uses of quotes match the configured preference.
Example: EnforcedStyle: single_quotes (default)
# bad
"No special symbols"
"No string interpolation"
"Just text"
# good
'No special symbols'
'No string interpolation'
'Just text'
"Wait! What's #{this}!"
Example: EnforcedStyle: double_quotes
# bad
'Just some text'
'No special chars or interpolation'
# good
"Just some text"
"No special chars or interpolation"
"Every string in #{project} uses double_quotes"
Missing frozen string literal comment. Open
require 'spec_helper'
- Read upRead up
- Exclude checks
This cop is designed to help you transition from mutable string literals
to frozen string literals.
It will add the comment # frozen_string_literal: true
to the top of
files to enable frozen string literals. Frozen string literals may be
default in future Ruby. The comment will be added below a shebang and
encoding comment.
Note that the cop will ignore files where the comment exists but is set
to false
instead of true
.
Example: EnforcedStyle: always (default)
# The `always` style will always add the frozen string literal comment
# to a file, regardless of the Ruby version or if `freeze` or `<<` are
# called on a string literal.
# bad
module Bar
# ...
end
# good
# frozen_string_literal: true
module Bar
# ...
end
# good
# frozen_string_literal: false
module Bar
# ...
end
Example: EnforcedStyle: never
# The `never` will enforce that the frozen string literal comment does
# not exist in a file.
# bad
# frozen_string_literal: true
module Baz
# ...
end
# good
module Baz
# ...
end
Example: EnforcedStyle: always_true
# The `always_true` style enforces that the frozen string literal
# comment is set to `true`. This is a stricter option than `always`
# and forces projects to use frozen string literals.
# bad
# frozen_string_literal: false
module Baz
# ...
end
# bad
module Baz
# ...
end
# good
# frozen_string_literal: true
module Bar
# ...
end
Prefer single-quoted strings when you don't need string interpolation or special symbols. Open
context "for a user" do
- Read upRead up
- Exclude checks
Checks if uses of quotes match the configured preference.
Example: EnforcedStyle: single_quotes (default)
# bad
"No special symbols"
"No string interpolation"
"Just text"
# good
'No special symbols'
'No string interpolation'
'Just text'
"Wait! What's #{this}!"
Example: EnforcedStyle: double_quotes
# bad
'Just some text'
'No special chars or interpolation'
# good
"Just some text"
"No special chars or interpolation"
"Every string in #{project} uses double_quotes"