Sign upLogin

FreeAllMedia/conan

View on GitHub
Star

Showing 31 of 31 total issues

Similar blocks of code found in 2 locations. Consider refactoring.
Open

describe("conanSteps.before(existingStep, beforeStep)", () => {
    let conanSteps;

    beforeEach(() => {
        conanSteps = new ConanSteps();
Severity: Major
Found in es6/spec/components/conanSteps/conanSteps.before.spec.js and 1 other location - About 1 day to fix
es6/spec/components/conanSteps/conanSteps.after.spec.js on lines 3..36

Duplicated Code

Duplicated code can lead to software that is hard to understand and difficult to change. The Don't Repeat Yourself (DRY) principle states:

Every piece of knowledge must have a single, unambiguous, authoritative representation within a system.

When you violate DRY, bugs and maintenance problems are sure to follow. Duplicated code has a tendency to both continue to replicate and also to diverge (leaving bugs as two similar implementations differ in subtle ways).

Tuning

This issue has a mass of 211.

We set useful threshold defaults for the languages we support but you may want to adjust these settings based on your project guidelines.

The threshold configuration represents the minimum mass a code block must have to be analyzed for duplication. The lower the threshold, the more fine-grained the comparison.

If the engine is too easily reporting duplication, try raising the threshold. If you suspect that the engine isn't catching enough duplication, try lowering the threshold. The best setting tends to differ from language to language.

See codeclimate-duplication's documentation for more information about tuning the mass threshold in your .codeclimate.yml.

Refactorings

Further Reading

Similar blocks of code found in 2 locations. Consider refactoring.
Open

describe("conanSteps.after(existingStep, afterStep)", () => {
    let conanSteps;

    beforeEach(() => {
        conanSteps = new ConanSteps();
Severity: Major
Found in es6/spec/components/conanSteps/conanSteps.after.spec.js and 1 other location - About 1 day to fix
es6/spec/components/conanSteps/conanSteps.before.spec.js on lines 3..36

Duplicated Code

Duplicated code can lead to software that is hard to understand and difficult to change. The Don't Repeat Yourself (DRY) principle states:

Every piece of knowledge must have a single, unambiguous, authoritative representation within a system.

When you violate DRY, bugs and maintenance problems are sure to follow. Duplicated code has a tendency to both continue to replicate and also to diverge (leaving bugs as two similar implementations differ in subtle ways).

Tuning

This issue has a mass of 211.

We set useful threshold defaults for the languages we support but you may want to adjust these settings based on your project guidelines.

The threshold configuration represents the minimum mass a code block must have to be analyzed for duplication. The lower the threshold, the more fine-grained the comparison.

If the engine is too easily reporting duplication, try raising the threshold. If you suspect that the engine isn't catching enough duplication, try lowering the threshold. The best setting tends to differ from language to language.

See codeclimate-duplication's documentation for more information about tuning the mass threshold in your .codeclimate.yml.

Refactorings

Further Reading

Function upsertLambdaByNameStep has 63 lines of code (exceeds 25 allowed). Consider refactoring.
Open

export default function upsertLambdaByNameStep(conan, context, done) {
    const lambda = new context.dependencies.aws.Lambda({"region": conan.config.region});
    if(context.results.lambda && context.results.lambda.found === true) {
        let lambdaParameters = {
            "FunctionName": context.parameters.name,
Severity: Major
Found in pseudo/upsertLambdaByNameStep.js - About 2 hrs to fix

    Similar blocks of code found in 2 locations. Consider refactoring.
    Open

    gulp.task("build-lib", ["copy-source"], () => {
    return gulp.src(paths.source.lib)
        .pipe(babel())
        .pipe(gulp.dest(paths.build.directories.lib));
});
    Severity: Major
    Found in tasks/build-lib.js and 1 other location - About 2 hrs to fix
    tasks/build-spec.js on lines 6..10

    Duplicated Code

    Duplicated code can lead to software that is hard to understand and difficult to change. The Don't Repeat Yourself (DRY) principle states:

    Every piece of knowledge must have a single, unambiguous, authoritative representation within a system.

    When you violate DRY, bugs and maintenance problems are sure to follow. Duplicated code has a tendency to both continue to replicate and also to diverge (leaving bugs as two similar implementations differ in subtle ways).

    Tuning

    This issue has a mass of 78.

    We set useful threshold defaults for the languages we support but you may want to adjust these settings based on your project guidelines.

    The threshold configuration represents the minimum mass a code block must have to be analyzed for duplication. The lower the threshold, the more fine-grained the comparison.

    If the engine is too easily reporting duplication, try raising the threshold. If you suspect that the engine isn't catching enough duplication, try lowering the threshold. The best setting tends to differ from language to language.

    See codeclimate-duplication's documentation for more information about tuning the mass threshold in your .codeclimate.yml.

    Refactorings

    Further Reading

    Similar blocks of code found in 2 locations. Consider refactoring.
    Open

    gulp.task("build-spec", ["build-lib"], () => {
    return gulp.src(paths.source.spec)
        .pipe(babel())
        .pipe(gulp.dest(paths.build.directories.spec));
});
    Severity: Major
    Found in tasks/build-spec.js and 1 other location - About 2 hrs to fix
    tasks/build-lib.js on lines 6..10

    Duplicated Code

    Duplicated code can lead to software that is hard to understand and difficult to change. The Don't Repeat Yourself (DRY) principle states:

    Every piece of knowledge must have a single, unambiguous, authoritative representation within a system.

    When you violate DRY, bugs and maintenance problems are sure to follow. Duplicated code has a tendency to both continue to replicate and also to diverge (leaving bugs as two similar implementations differ in subtle ways).

    Tuning

    This issue has a mass of 78.

    We set useful threshold defaults for the languages we support but you may want to adjust these settings based on your project guidelines.

    The threshold configuration represents the minimum mass a code block must have to be analyzed for duplication. The lower the threshold, the more fine-grained the comparison.

    If the engine is too easily reporting duplication, try raising the threshold. If you suspect that the engine isn't catching enough duplication, try lowering the threshold. The best setting tends to differ from language to language.

    See codeclimate-duplication's documentation for more information about tuning the mass threshold in your .codeclimate.yml.

    Refactorings

    Further Reading

    File upsertLambdaByNameStep.spec.js has 252 lines of code (exceeds 250 allowed). Consider refactoring.
    Open

    import sinon from "sinon";
import chai from "chai";
import upsertLambdaByNameStep from "../../steps/upsertLambdaByNameStep.js";

describe("upsertLambdaByNameStep", () => {
    Severity: Minor
    Found in pseudo/upsertLambdaByNameStep.spec.js - About 2 hrs to fix

      Similar blocks of code found in 3 locations. Consider refactoring.
      Open

              it("should return the response data for the lambda", done => {
            findLambdaByNameStep(conan, context, (error, result) => {
                result.lambda.response.should.eql(responseData);
                done();
            });
      Severity: Major
      Found in pseudo/findLambdaByNameStep.spec.js and 2 other locations - About 1 hr to fix
      pseudo/upsertLambdaByNameStep.spec.js on lines 122..127
      pseudo/upsertLambdaByNameStep.spec.js on lines 228..233

      Duplicated Code

      Duplicated code can lead to software that is hard to understand and difficult to change. The Don't Repeat Yourself (DRY) principle states:

      Every piece of knowledge must have a single, unambiguous, authoritative representation within a system.

      When you violate DRY, bugs and maintenance problems are sure to follow. Duplicated code has a tendency to both continue to replicate and also to diverge (leaving bugs as two similar implementations differ in subtle ways).

      Tuning

      This issue has a mass of 59.

      We set useful threshold defaults for the languages we support but you may want to adjust these settings based on your project guidelines.

      The threshold configuration represents the minimum mass a code block must have to be analyzed for duplication. The lower the threshold, the more fine-grained the comparison.

      If the engine is too easily reporting duplication, try raising the threshold. If you suspect that the engine isn't catching enough duplication, try lowering the threshold. The best setting tends to differ from language to language.

      See codeclimate-duplication's documentation for more information about tuning the mass threshold in your .codeclimate.yml.

      Refactorings

      Further Reading

      Similar blocks of code found in 3 locations. Consider refactoring.
      Open

                  it("should return the response data in the results", done => {
                upsertLambdaByNameStep(conan, context, (error, result) => {
                    result.lambda.response.should.eql(responseData);
                    done();
                });
      Severity: Major
      Found in pseudo/upsertLambdaByNameStep.spec.js and 2 other locations - About 1 hr to fix
      pseudo/findLambdaByNameStep.spec.js on lines 101..106
      pseudo/upsertLambdaByNameStep.spec.js on lines 228..233

      Duplicated Code

      Duplicated code can lead to software that is hard to understand and difficult to change. The Don't Repeat Yourself (DRY) principle states:

      Every piece of knowledge must have a single, unambiguous, authoritative representation within a system.

      When you violate DRY, bugs and maintenance problems are sure to follow. Duplicated code has a tendency to both continue to replicate and also to diverge (leaving bugs as two similar implementations differ in subtle ways).

      Tuning

      This issue has a mass of 59.

      We set useful threshold defaults for the languages we support but you may want to adjust these settings based on your project guidelines.

      The threshold configuration represents the minimum mass a code block must have to be analyzed for duplication. The lower the threshold, the more fine-grained the comparison.

      If the engine is too easily reporting duplication, try raising the threshold. If you suspect that the engine isn't catching enough duplication, try lowering the threshold. The best setting tends to differ from language to language.

      See codeclimate-duplication's documentation for more information about tuning the mass threshold in your .codeclimate.yml.

      Refactorings

      Further Reading

      Similar blocks of code found in 2 locations. Consider refactoring.
      Open

      describe("conan.steps", () => {
    it("should return an instance of ConanSteps", () => {
        const conan = new Conan();
        conan.steps.should.be.instanceOf(ConanSteps);
    });
      Severity: Major
      Found in es6/spec/conan/conan.steps.spec.js and 1 other location - About 1 hr to fix
      es6/spec/conan/conan.plugins.spec.js on lines 3..8

      Duplicated Code

      Duplicated code can lead to software that is hard to understand and difficult to change. The Don't Repeat Yourself (DRY) principle states:

      Every piece of knowledge must have a single, unambiguous, authoritative representation within a system.

      When you violate DRY, bugs and maintenance problems are sure to follow. Duplicated code has a tendency to both continue to replicate and also to diverge (leaving bugs as two similar implementations differ in subtle ways).

      Tuning

      This issue has a mass of 59.

      We set useful threshold defaults for the languages we support but you may want to adjust these settings based on your project guidelines.

      The threshold configuration represents the minimum mass a code block must have to be analyzed for duplication. The lower the threshold, the more fine-grained the comparison.

      If the engine is too easily reporting duplication, try raising the threshold. If you suspect that the engine isn't catching enough duplication, try lowering the threshold. The best setting tends to differ from language to language.

      See codeclimate-duplication's documentation for more information about tuning the mass threshold in your .codeclimate.yml.

      Refactorings

      Further Reading

      Similar blocks of code found in 2 locations. Consider refactoring.
      Open

      describe("conan.plugins", () => {
    it("should return an instance of Array", () => {
        const conan = new Conan();
        conan.plugins.should.be.instanceOf(Array);
    });
      Severity: Major
      Found in es6/spec/conan/conan.plugins.spec.js and 1 other location - About 1 hr to fix
      es6/spec/conan/conan.steps.spec.js on lines 4..9

      Duplicated Code

      Duplicated code can lead to software that is hard to understand and difficult to change. The Don't Repeat Yourself (DRY) principle states:

      Every piece of knowledge must have a single, unambiguous, authoritative representation within a system.

      When you violate DRY, bugs and maintenance problems are sure to follow. Duplicated code has a tendency to both continue to replicate and also to diverge (leaving bugs as two similar implementations differ in subtle ways).

      Tuning

      This issue has a mass of 59.

      We set useful threshold defaults for the languages we support but you may want to adjust these settings based on your project guidelines.

      The threshold configuration represents the minimum mass a code block must have to be analyzed for duplication. The lower the threshold, the more fine-grained the comparison.

      If the engine is too easily reporting duplication, try raising the threshold. If you suspect that the engine isn't catching enough duplication, try lowering the threshold. The best setting tends to differ from language to language.

      See codeclimate-duplication's documentation for more information about tuning the mass threshold in your .codeclimate.yml.

      Refactorings

      Further Reading

      Similar blocks of code found in 2 locations. Consider refactoring.
      Open

              it("should return false for that lambda", done => {
            findLambdaByNameStep(conan, context, (error, result) => {
                result.lambda.found.should.equal(false);
                done();
            });
      Severity: Major
      Found in pseudo/findLambdaByNameStep.spec.js and 1 other location - About 1 hr to fix
      pseudo/findLambdaByNameStep.spec.js on lines 94..99

      Duplicated Code

      Duplicated code can lead to software that is hard to understand and difficult to change. The Don't Repeat Yourself (DRY) principle states:

      Every piece of knowledge must have a single, unambiguous, authoritative representation within a system.

      When you violate DRY, bugs and maintenance problems are sure to follow. Duplicated code has a tendency to both continue to replicate and also to diverge (leaving bugs as two similar implementations differ in subtle ways).

      Tuning

      This issue has a mass of 59.

      We set useful threshold defaults for the languages we support but you may want to adjust these settings based on your project guidelines.

      The threshold configuration represents the minimum mass a code block must have to be analyzed for duplication. The lower the threshold, the more fine-grained the comparison.

      If the engine is too easily reporting duplication, try raising the threshold. If you suspect that the engine isn't catching enough duplication, try lowering the threshold. The best setting tends to differ from language to language.

      See codeclimate-duplication's documentation for more information about tuning the mass threshold in your .codeclimate.yml.

      Refactorings

      Further Reading

      Similar blocks of code found in 3 locations. Consider refactoring.
      Open

                  it("should return the response data in the results", done => {
                upsertLambdaByNameStep(conan, context, (error, result) => {
                    result.lambda.response.should.eql(responseData);
                    done();
                });
      Severity: Major
      Found in pseudo/upsertLambdaByNameStep.spec.js and 2 other locations - About 1 hr to fix
      pseudo/findLambdaByNameStep.spec.js on lines 101..106
      pseudo/upsertLambdaByNameStep.spec.js on lines 122..127

      Duplicated Code

      Duplicated code can lead to software that is hard to understand and difficult to change. The Don't Repeat Yourself (DRY) principle states:

      Every piece of knowledge must have a single, unambiguous, authoritative representation within a system.

      When you violate DRY, bugs and maintenance problems are sure to follow. Duplicated code has a tendency to both continue to replicate and also to diverge (leaving bugs as two similar implementations differ in subtle ways).

      Tuning

      This issue has a mass of 59.

      We set useful threshold defaults for the languages we support but you may want to adjust these settings based on your project guidelines.

      The threshold configuration represents the minimum mass a code block must have to be analyzed for duplication. The lower the threshold, the more fine-grained the comparison.

      If the engine is too easily reporting duplication, try raising the threshold. If you suspect that the engine isn't catching enough duplication, try lowering the threshold. The best setting tends to differ from language to language.

      See codeclimate-duplication's documentation for more information about tuning the mass threshold in your .codeclimate.yml.

      Refactorings

      Further Reading

      Similar blocks of code found in 2 locations. Consider refactoring.
      Open

              it("should return true for that lambda", done => {
            findLambdaByNameStep(conan, context, (error, result) => {
                result.lambda.found.should.equal(true);
                done();
            });
      Severity: Major
      Found in pseudo/findLambdaByNameStep.spec.js and 1 other location - About 1 hr to fix
      pseudo/findLambdaByNameStep.spec.js on lines 76..81

      Duplicated Code

      Duplicated code can lead to software that is hard to understand and difficult to change. The Don't Repeat Yourself (DRY) principle states:

      Every piece of knowledge must have a single, unambiguous, authoritative representation within a system.

      When you violate DRY, bugs and maintenance problems are sure to follow. Duplicated code has a tendency to both continue to replicate and also to diverge (leaving bugs as two similar implementations differ in subtle ways).

      Tuning

      This issue has a mass of 59.

      We set useful threshold defaults for the languages we support but you may want to adjust these settings based on your project guidelines.

      The threshold configuration represents the minimum mass a code block must have to be analyzed for duplication. The lower the threshold, the more fine-grained the comparison.

      If the engine is too easily reporting duplication, try raising the threshold. If you suspect that the engine isn't catching enough duplication, try lowering the threshold. The best setting tends to differ from language to language.

      See codeclimate-duplication's documentation for more information about tuning the mass threshold in your .codeclimate.yml.

      Refactorings

      Further Reading

      Identical blocks of code found in 2 locations. Consider refactoring.
      Open

          gulp.src(paths.source.lib)
        .pipe(istanbul()) // Covering files
        .pipe(istanbul.hookRequire()) // Force `require` to return covered files
        .on("finish", () => {
            gulp.src(paths.build.sourceSpec)
      Severity: Major
      Found in tasks/test-coverage.js and 1 other location - About 1 hr to fix
      tasks/test-es6.js on lines 10..19

      Duplicated Code

      Duplicated code can lead to software that is hard to understand and difficult to change. The Don't Repeat Yourself (DRY) principle states:

      Every piece of knowledge must have a single, unambiguous, authoritative representation within a system.

      When you violate DRY, bugs and maintenance problems are sure to follow. Duplicated code has a tendency to both continue to replicate and also to diverge (leaving bugs as two similar implementations differ in subtle ways).

      Tuning

      This issue has a mass of 56.

      We set useful threshold defaults for the languages we support but you may want to adjust these settings based on your project guidelines.

      The threshold configuration represents the minimum mass a code block must have to be analyzed for duplication. The lower the threshold, the more fine-grained the comparison.

      If the engine is too easily reporting duplication, try raising the threshold. If you suspect that the engine isn't catching enough duplication, try lowering the threshold. The best setting tends to differ from language to language.

      See codeclimate-duplication's documentation for more information about tuning the mass threshold in your .codeclimate.yml.

      Refactorings

      Further Reading

      Identical blocks of code found in 2 locations. Consider refactoring.
      Open

          gulp.src(paths.source.lib)
        .pipe(istanbul()) // Covering files
        .pipe(istanbul.hookRequire()) // Force `require` to return covered files
        .on("finish", () => {
            gulp.src(paths.build.sourceSpec)
      Severity: Major
      Found in tasks/test-es6.js and 1 other location - About 1 hr to fix
      tasks/test-coverage.js on lines 10..19

      Duplicated Code

      Duplicated code can lead to software that is hard to understand and difficult to change. The Don't Repeat Yourself (DRY) principle states:

      Every piece of knowledge must have a single, unambiguous, authoritative representation within a system.

      When you violate DRY, bugs and maintenance problems are sure to follow. Duplicated code has a tendency to both continue to replicate and also to diverge (leaving bugs as two similar implementations differ in subtle ways).

      Tuning

      This issue has a mass of 56.

      We set useful threshold defaults for the languages we support but you may want to adjust these settings based on your project guidelines.

      The threshold configuration represents the minimum mass a code block must have to be analyzed for duplication. The lower the threshold, the more fine-grained the comparison.

      If the engine is too easily reporting duplication, try raising the threshold. If you suspect that the engine isn't catching enough duplication, try lowering the threshold. The best setting tends to differ from language to language.

      See codeclimate-duplication's documentation for more information about tuning the mass threshold in your .codeclimate.yml.

      Refactorings

      Further Reading

      Similar blocks of code found in 2 locations. Consider refactoring.
      Open

          it("should add the component instance to .components[all]", () => {
        const server = conan.server("127.0.0.1");
        conan.components.all[0].should.eql(server);
    });
      Severity: Major
      Found in es6/spec/conan/conan.addComponent.spec.js and 1 other location - About 1 hr to fix
      es6/spec/conan/conan.addComponent.spec.js on lines 35..38

      Duplicated Code

      Duplicated code can lead to software that is hard to understand and difficult to change. The Don't Repeat Yourself (DRY) principle states:

      Every piece of knowledge must have a single, unambiguous, authoritative representation within a system.

      When you violate DRY, bugs and maintenance problems are sure to follow. Duplicated code has a tendency to both continue to replicate and also to diverge (leaving bugs as two similar implementations differ in subtle ways).

      Tuning

      This issue has a mass of 55.

      We set useful threshold defaults for the languages we support but you may want to adjust these settings based on your project guidelines.

      The threshold configuration represents the minimum mass a code block must have to be analyzed for duplication. The lower the threshold, the more fine-grained the comparison.

      If the engine is too easily reporting duplication, try raising the threshold. If you suspect that the engine isn't catching enough duplication, try lowering the threshold. The best setting tends to differ from language to language.

      See codeclimate-duplication's documentation for more information about tuning the mass threshold in your .codeclimate.yml.

      Refactorings

      Further Reading

      Similar blocks of code found in 2 locations. Consider refactoring.
      Open

          it("should add the component instance to .components[componentName]", () => {
        const server = conan.server("127.0.0.1");
        conan.components.server[0].should.eql(server);
    });
      Severity: Major
      Found in es6/spec/conan/conan.addComponent.spec.js and 1 other location - About 1 hr to fix
      es6/spec/conan/conan.addComponent.spec.js on lines 40..43

      Duplicated Code

      Duplicated code can lead to software that is hard to understand and difficult to change. The Don't Repeat Yourself (DRY) principle states:

      Every piece of knowledge must have a single, unambiguous, authoritative representation within a system.

      When you violate DRY, bugs and maintenance problems are sure to follow. Duplicated code has a tendency to both continue to replicate and also to diverge (leaving bugs as two similar implementations differ in subtle ways).

      Tuning

      This issue has a mass of 55.

      We set useful threshold defaults for the languages we support but you may want to adjust these settings based on your project guidelines.

      The threshold configuration represents the minimum mass a code block must have to be analyzed for duplication. The lower the threshold, the more fine-grained the comparison.

      If the engine is too easily reporting duplication, try raising the threshold. If you suspect that the engine isn't catching enough duplication, try lowering the threshold. The best setting tends to differ from language to language.

      See codeclimate-duplication's documentation for more information about tuning the mass threshold in your .codeclimate.yml.

      Refactorings

      Further Reading

      Identical blocks of code found in 3 locations. Consider refactoring.
      Open

                  it("should not return anything else", done => {
                upsertLambdaByNameStep(conan, context, (error, result) => {
                    should.not.exist(result);
                    done();
                });
      Severity: Major
      Found in pseudo/upsertLambdaByNameStep.spec.js and 2 other locations - About 50 mins to fix
      pseudo/upsertLambdaByNameStep.spec.js on lines 257..262
      pseudo/upsertLambdaByNameStep.spec.js on lines 282..287

      Duplicated Code

      Duplicated code can lead to software that is hard to understand and difficult to change. The Don't Repeat Yourself (DRY) principle states:

      Every piece of knowledge must have a single, unambiguous, authoritative representation within a system.

      When you violate DRY, bugs and maintenance problems are sure to follow. Duplicated code has a tendency to both continue to replicate and also to diverge (leaving bugs as two similar implementations differ in subtle ways).

      Tuning

      This issue has a mass of 51.

      We set useful threshold defaults for the languages we support but you may want to adjust these settings based on your project guidelines.

      The threshold configuration represents the minimum mass a code block must have to be analyzed for duplication. The lower the threshold, the more fine-grained the comparison.

      If the engine is too easily reporting duplication, try raising the threshold. If you suspect that the engine isn't catching enough duplication, try lowering the threshold. The best setting tends to differ from language to language.

      See codeclimate-duplication's documentation for more information about tuning the mass threshold in your .codeclimate.yml.

      Refactorings

      Further Reading

      Identical blocks of code found in 3 locations. Consider refactoring.
      Open

                  it("should not return anything else", done => {
                upsertLambdaByNameStep(conan, context, (error, result) => {
                    should.not.exist(result);
                    done();
                });
      Severity: Major
      Found in pseudo/upsertLambdaByNameStep.spec.js and 2 other locations - About 50 mins to fix
      pseudo/upsertLambdaByNameStep.spec.js on lines 154..159
      pseudo/upsertLambdaByNameStep.spec.js on lines 282..287

      Duplicated Code

      Duplicated code can lead to software that is hard to understand and difficult to change. The Don't Repeat Yourself (DRY) principle states:

      Every piece of knowledge must have a single, unambiguous, authoritative representation within a system.

      When you violate DRY, bugs and maintenance problems are sure to follow. Duplicated code has a tendency to both continue to replicate and also to diverge (leaving bugs as two similar implementations differ in subtle ways).

      Tuning

      This issue has a mass of 51.

      We set useful threshold defaults for the languages we support but you may want to adjust these settings based on your project guidelines.

      The threshold configuration represents the minimum mass a code block must have to be analyzed for duplication. The lower the threshold, the more fine-grained the comparison.

      If the engine is too easily reporting duplication, try raising the threshold. If you suspect that the engine isn't catching enough duplication, try lowering the threshold. The best setting tends to differ from language to language.

      See codeclimate-duplication's documentation for more information about tuning the mass threshold in your .codeclimate.yml.

      Refactorings

      Further Reading

      Identical blocks of code found in 3 locations. Consider refactoring.
      Open

                  it("should not return anything else", done => {
                upsertLambdaByNameStep(conan, context, (error, result) => {
                    should.not.exist(result);
                    done();
                });
      Severity: Major
      Found in pseudo/upsertLambdaByNameStep.spec.js and 2 other locations - About 50 mins to fix
      pseudo/upsertLambdaByNameStep.spec.js on lines 154..159
      pseudo/upsertLambdaByNameStep.spec.js on lines 257..262

      Duplicated Code

      Duplicated code can lead to software that is hard to understand and difficult to change. The Don't Repeat Yourself (DRY) principle states:

      Every piece of knowledge must have a single, unambiguous, authoritative representation within a system.

      When you violate DRY, bugs and maintenance problems are sure to follow. Duplicated code has a tendency to both continue to replicate and also to diverge (leaving bugs as two similar implementations differ in subtle ways).

      Tuning

      This issue has a mass of 51.

      We set useful threshold defaults for the languages we support but you may want to adjust these settings based on your project guidelines.

      The threshold configuration represents the minimum mass a code block must have to be analyzed for duplication. The lower the threshold, the more fine-grained the comparison.

      If the engine is too easily reporting duplication, try raising the threshold. If you suspect that the engine isn't catching enough duplication, try lowering the threshold. The best setting tends to differ from language to language.

      See codeclimate-duplication's documentation for more information about tuning the mass threshold in your .codeclimate.yml.

      Refactorings

      Further Reading

      Severity
      Category
      Status
      Source
      Language