Sign upLogin

HazyResearch/numbskull

View on GitHub
Star

Showing 497 of 497 total issues

Identical blocks of code found in 2 locations. Consider refactoring.
Open

    for e in hyperedges:
        for i in range(len(e)):
            for j in range(i + 1, len(e)):
                newedge = (e[i], e[j])
                G.add_edge(*e)
Severity: Major
Found in salt/src/messages.py and 1 other location - About 3 hrs to fix
salt/src/messages.py on lines 606..610

Duplicated Code

Duplicated code can lead to software that is hard to understand and difficult to change. The Don't Repeat Yourself (DRY) principle states:

Every piece of knowledge must have a single, unambiguous, authoritative representation within a system.

When you violate DRY, bugs and maintenance problems are sure to follow. Duplicated code has a tendency to both continue to replicate and also to diverge (leaving bugs as two similar implementations differ in subtle ways).

Tuning

This issue has a mass of 70.

We set useful threshold defaults for the languages we support but you may want to adjust these settings based on your project guidelines.

The threshold configuration represents the minimum mass a code block must have to be analyzed for duplication. The lower the threshold, the more fine-grained the comparison.

If the engine is too easily reporting duplication, try raising the threshold. If you suspect that the engine isn't catching enough duplication, try lowering the threshold. The best setting tends to differ from language to language.

See codeclimate-duplication's documentation for more information about tuning the mass threshold in your .codeclimate.yml.

Refactorings

Further Reading

Identical blocks of code found in 2 locations. Consider refactoring.
Open

    for e in hyperedges:
        for i in range(len(e)):
            for j in range(i + 1, len(e)):
                newedge = (e[i], e[j])
                G.add_edge(*e)
Severity: Major
Found in salt/src/messages.py and 1 other location - About 3 hrs to fix
salt/src/messages.py on lines 556..560

Duplicated Code

Duplicated code can lead to software that is hard to understand and difficult to change. The Don't Repeat Yourself (DRY) principle states:

Every piece of knowledge must have a single, unambiguous, authoritative representation within a system.

When you violate DRY, bugs and maintenance problems are sure to follow. Duplicated code has a tendency to both continue to replicate and also to diverge (leaving bugs as two similar implementations differ in subtle ways).

Tuning

This issue has a mass of 70.

We set useful threshold defaults for the languages we support but you may want to adjust these settings based on your project guidelines.

The threshold configuration represents the minimum mass a code block must have to be analyzed for duplication. The lower the threshold, the more fine-grained the comparison.

If the engine is too easily reporting duplication, try raising the threshold. If you suspect that the engine isn't catching enough duplication, try lowering the threshold. The best setting tends to differ from language to language.

See codeclimate-duplication's documentation for more information about tuning the mass threshold in your .codeclimate.yml.

Refactorings

Further Reading

Cyclomatic complexity is too high in function find_metis_parts. (17)
Open

def find_metis_parts(conn, cur, parts):
    """TODO"""
    # Open a cursor to perform database operations
    (factor_view, variable_view, weight_view) = get_views(cur)
    # Obtain graph
Severity: Minor
Found in salt/src/messages.py by radon

Cyclomatic Complexity

Cyclomatic Complexity corresponds to the number of decisions a block of code contains plus 1. This number (also called McCabe number) is equal to the number of linearly independent paths through the code. This number can be used as a guide when testing conditional logic in blocks.

Radon analyzes the AST tree of a Python program to compute Cyclomatic Complexity. Statements have the following effects on Cyclomatic Complexity:

Construct Effect on CC Reasoning
if +1 An if statement is a single decision.
elif +1 The elif statement adds another decision.
else +0 The else statement does not cause a new decision. The decision is at the if.
for +1 There is a decision at the start of the loop.
while +1 There is a decision at the while statement.
except +1 Each except branch adds a new conditional path of execution.
finally +0 The finally block is unconditionally executed.
with +1 The with statement roughly corresponds to a try/except block (see PEP 343 for details).
assert +1 The assert statement internally roughly equals a conditional statement.
Comprehension +1 A list/set/dict comprehension of generator expression is equivalent to a for loop.
Boolean Operator +1 Every boolean operator (and, or) adds a decision point.

Source: http://radon.readthedocs.org/en/latest/intro.html

Function prepare_db has a Cognitive Complexity of 25 (exceeds 5 allowed). Consider refactoring.
Open

    def prepare_db(self, cur):
        """TODO."""
        # Run deepdive to perform candidate extraction
        self.run_deepdive()
Severity: Minor
Found in salt/src/numbskull_master.py - About 3 hrs to fix

Cognitive Complexity

Cognitive Complexity is a measure of how difficult a unit of code is to intuitively understand. Unlike Cyclomatic Complexity, which determines how difficult your code will be to test, Cognitive Complexity tells you how difficult your code will be to read and comprehend.

A method's cognitive complexity is based on a few simple rules:

  • Code is not considered more complex when it uses shorthand that the language provides for collapsing multiple statements into one
  • Code is considered more complex for each "break in the linear flow of the code"
  • Code is considered more complex when "flow breaking structures are nested"

Further reading

Cyclomatic complexity is too high in function compute_var_map. (16)
Open

@jit(nopython=True, cache=True)
def compute_var_map(variables, factors, fmap, vmap, factor_index, domain_mask,
                    factors_to_skip=np.empty(0, np.int64)):
    """TODO."""
    # Fill in domain values (for mapping when dumping marginals)
Severity: Minor
Found in numbskull/dataloading.py by radon

Cyclomatic Complexity

Cyclomatic Complexity corresponds to the number of decisions a block of code contains plus 1. This number (also called McCabe number) is equal to the number of linearly independent paths through the code. This number can be used as a guide when testing conditional logic in blocks.

Radon analyzes the AST tree of a Python program to compute Cyclomatic Complexity. Statements have the following effects on Cyclomatic Complexity:

Construct Effect on CC Reasoning
if +1 An if statement is a single decision.
elif +1 The elif statement adds another decision.
else +0 The else statement does not cause a new decision. The decision is at the if.
for +1 There is a decision at the start of the loop.
while +1 There is a decision at the while statement.
except +1 Each except branch adds a new conditional path of execution.
finally +0 The finally block is unconditionally executed.
with +1 The with statement roughly corresponds to a try/except block (see PEP 343 for details).
assert +1 The assert statement internally roughly equals a conditional statement.
Comprehension +1 A list/set/dict comprehension of generator expression is equivalent to a for loop.
Boolean Operator +1 Every boolean operator (and, or) adds a decision point.

Source: http://radon.readthedocs.org/en/latest/intro.html

File inference.py has 311 lines of code (exceeds 250 allowed). Consider refactoring.
Open

"""TODO."""

from __future__ import print_function, absolute_import
import numba
from numba import jit
Severity: Minor
Found in numbskull/inference.py - About 3 hrs to fix

    File distributed.py has 308 lines of code (exceeds 250 allowed). Consider refactoring.
    Open

    #!/usr/bin/env python

"""TODO."""

from __future__ import print_function
    Severity: Minor
    Found in numbskull/distributed.py - About 3 hrs to fix

      Cyclomatic complexity is too high in method inference. (15)
      Open

          def inference(self, epochs=1, learn=False):
        """TODO."""
        mode = "Learning" if learn else "Inference"
        print("BEGINNING " + mode.upper())
        begin = time.time()
      Severity: Minor
      Found in salt/src/numbskull_master.py by radon

      Cyclomatic Complexity

      Cyclomatic Complexity corresponds to the number of decisions a block of code contains plus 1. This number (also called McCabe number) is equal to the number of linearly independent paths through the code. This number can be used as a guide when testing conditional logic in blocks.

      Radon analyzes the AST tree of a Python program to compute Cyclomatic Complexity. Statements have the following effects on Cyclomatic Complexity:

      Construct Effect on CC Reasoning
      if +1 An if statement is a single decision.
      elif +1 The elif statement adds another decision.
      else +0 The else statement does not cause a new decision. The decision is at the if.
      for +1 There is a decision at the start of the loop.
      while +1 There is a decision at the while statement.
      except +1 Each except branch adds a new conditional path of execution.
      finally +0 The finally block is unconditionally executed.
      with +1 The with statement roughly corresponds to a try/except block (see PEP 343 for details).
      assert +1 The assert statement internally roughly equals a conditional statement.
      Comprehension +1 A list/set/dict comprehension of generator expression is equivalent to a for loop.
      Boolean Operator +1 Every boolean operator (and, or) adds a decision point.

      Source: http://radon.readthedocs.org/en/latest/intro.html

      Cyclomatic complexity is too high in function _set_tcp_keepalive. (15)
      Open

      def _set_tcp_keepalive(sock, opts):
    """Ensure that TCP keepalives are set for the socket."""
    if hasattr(socket, 'SO_KEEPALIVE'):
        if opts.get('tcp_keepalive', False):
            sock.setsockopt(socket.SOL_SOCKET, socket.SO_KEEPALIVE, 1)
      Severity: Minor
      Found in salt/src/numbskull_minion_server.py by radon

      Cyclomatic Complexity

      Cyclomatic Complexity corresponds to the number of decisions a block of code contains plus 1. This number (also called McCabe number) is equal to the number of linearly independent paths through the code. This number can be used as a guide when testing conditional logic in blocks.

      Radon analyzes the AST tree of a Python program to compute Cyclomatic Complexity. Statements have the following effects on Cyclomatic Complexity:

      Construct Effect on CC Reasoning
      if +1 An if statement is a single decision.
      elif +1 The elif statement adds another decision.
      else +0 The else statement does not cause a new decision. The decision is at the if.
      for +1 There is a decision at the start of the loop.
      while +1 There is a decision at the while statement.
      except +1 Each except branch adds a new conditional path of execution.
      finally +0 The finally block is unconditionally executed.
      with +1 The with statement roughly corresponds to a try/except block (see PEP 343 for details).
      assert +1 The assert statement internally roughly equals a conditional statement.
      Comprehension +1 A list/set/dict comprehension of generator expression is equivalent to a for loop.
      Boolean Operator +1 Every boolean operator (and, or) adds a decision point.

      Source: http://radon.readthedocs.org/en/latest/intro.html

      Function sample_and_sgd has a Cognitive Complexity of 23 (exceeds 5 allowed). Consider refactoring.
      Open

      def sample_and_sgd(var_samp, step, regularization, reg_param, truncation,
                   var_copy, weight_copy, weight, variable, factor, fmap,
                   vmap, factor_index, Z, fids, var_value, var_value_evid,
                   weight_value, learn_non_evidence):
    """TODO."""
      Severity: Minor
      Found in numbskull/learning.py - About 3 hrs to fix

      Cognitive Complexity

      Cognitive Complexity is a measure of how difficult a unit of code is to intuitively understand. Unlike Cyclomatic Complexity, which determines how difficult your code will be to test, Cognitive Complexity tells you how difficult your code will be to read and comprehend.

      A method's cognitive complexity is based on a few simple rules:

      • Code is not considered more complex when it uses shorthand that the language provides for collapsing multiple statements into one
      • Code is considered more complex for each "break in the linear flow of the code"
      • Code is considered more complex when "flow breaking structures are nested"

      Further reading

      Function find_metis_parts has a Cognitive Complexity of 23 (exceeds 5 allowed). Consider refactoring.
      Open

      def find_metis_parts(conn, cur, parts):
    """TODO"""
    # Open a cursor to perform database operations
    (factor_view, variable_view, weight_view) = get_views(cur)
    # Obtain graph
      Severity: Minor
      Found in salt/src/messages.py - About 3 hrs to fix

      Cognitive Complexity

      Cognitive Complexity is a measure of how difficult a unit of code is to intuitively understand. Unlike Cyclomatic Complexity, which determines how difficult your code will be to test, Cognitive Complexity tells you how difficult your code will be to read and comprehend.

      A method's cognitive complexity is based on a few simple rules:

      • Code is not considered more complex when it uses shorthand that the language provides for collapsing multiple statements into one
      • Code is considered more complex for each "break in the linear flow of the code"
      • Code is considered more complex when "flow breaking structures are nested"

      Further reading

      Identical blocks of code found in 3 locations. Consider refactoring.
      Open

              head = value if (fmap[ftv_end - 1]["vid"] == var_samp) \
            else var_value[var_copy][fmap[ftv_end - 1]["vid"]]
      Severity: Major
      Found in numbskull/inference.py and 2 other locations - About 3 hrs to fix
      numbskull/inference.py on lines 214..215
      numbskull/inference.py on lines 224..225

      Duplicated Code

      Duplicated code can lead to software that is hard to understand and difficult to change. The Don't Repeat Yourself (DRY) principle states:

      Every piece of knowledge must have a single, unambiguous, authoritative representation within a system.

      When you violate DRY, bugs and maintenance problems are sure to follow. Duplicated code has a tendency to both continue to replicate and also to diverge (leaving bugs as two similar implementations differ in subtle ways).

      Tuning

      This issue has a mass of 65.

      We set useful threshold defaults for the languages we support but you may want to adjust these settings based on your project guidelines.

      The threshold configuration represents the minimum mass a code block must have to be analyzed for duplication. The lower the threshold, the more fine-grained the comparison.

      If the engine is too easily reporting duplication, try raising the threshold. If you suspect that the engine isn't catching enough duplication, try lowering the threshold. The best setting tends to differ from language to language.

      See codeclimate-duplication's documentation for more information about tuning the mass threshold in your .codeclimate.yml.

      Refactorings

      Further Reading

      Identical blocks of code found in 3 locations. Consider refactoring.
      Open

              head = value if (fmap[ftv_end - 1]["vid"] == var_samp) \
            else var_value[var_copy][fmap[ftv_end - 1]["vid"]]
      Severity: Major
      Found in numbskull/inference.py and 2 other locations - About 3 hrs to fix
      numbskull/inference.py on lines 203..204
      numbskull/inference.py on lines 224..225

      Duplicated Code

      Duplicated code can lead to software that is hard to understand and difficult to change. The Don't Repeat Yourself (DRY) principle states:

      Every piece of knowledge must have a single, unambiguous, authoritative representation within a system.

      When you violate DRY, bugs and maintenance problems are sure to follow. Duplicated code has a tendency to both continue to replicate and also to diverge (leaving bugs as two similar implementations differ in subtle ways).

      Tuning

      This issue has a mass of 65.

      We set useful threshold defaults for the languages we support but you may want to adjust these settings based on your project guidelines.

      The threshold configuration represents the minimum mass a code block must have to be analyzed for duplication. The lower the threshold, the more fine-grained the comparison.

      If the engine is too easily reporting duplication, try raising the threshold. If you suspect that the engine isn't catching enough duplication, try lowering the threshold. The best setting tends to differ from language to language.

      See codeclimate-duplication's documentation for more information about tuning the mass threshold in your .codeclimate.yml.

      Refactorings

      Further Reading

      Identical blocks of code found in 3 locations. Consider refactoring.
      Open

              head = value if (fmap[ftv_end - 1]["vid"] == var_samp) \
            else var_value[var_copy][fmap[ftv_end - 1]["vid"]]
      Severity: Major
      Found in numbskull/inference.py and 2 other locations - About 3 hrs to fix
      numbskull/inference.py on lines 203..204
      numbskull/inference.py on lines 214..215

      Duplicated Code

      Duplicated code can lead to software that is hard to understand and difficult to change. The Don't Repeat Yourself (DRY) principle states:

      Every piece of knowledge must have a single, unambiguous, authoritative representation within a system.

      When you violate DRY, bugs and maintenance problems are sure to follow. Duplicated code has a tendency to both continue to replicate and also to diverge (leaving bugs as two similar implementations differ in subtle ways).

      Tuning

      This issue has a mass of 65.

      We set useful threshold defaults for the languages we support but you may want to adjust these settings based on your project guidelines.

      The threshold configuration represents the minimum mass a code block must have to be analyzed for duplication. The lower the threshold, the more fine-grained the comparison.

      If the engine is too easily reporting duplication, try raising the threshold. If you suspect that the engine isn't catching enough duplication, try lowering the threshold. The best setting tends to differ from language to language.

      See codeclimate-duplication's documentation for more information about tuning the mass threshold in your .codeclimate.yml.

      Refactorings

      Further Reading

      Cyclomatic complexity is too high in method prepare_db. (14)
      Open

          def prepare_db(self, cur):
        """TODO."""
        # Run deepdive to perform candidate extraction
        self.run_deepdive()
      Severity: Minor
      Found in salt/src/numbskull_master.py by radon

      Cyclomatic Complexity

      Cyclomatic Complexity corresponds to the number of decisions a block of code contains plus 1. This number (also called McCabe number) is equal to the number of linearly independent paths through the code. This number can be used as a guide when testing conditional logic in blocks.

      Radon analyzes the AST tree of a Python program to compute Cyclomatic Complexity. Statements have the following effects on Cyclomatic Complexity:

      Construct Effect on CC Reasoning
      if +1 An if statement is a single decision.
      elif +1 The elif statement adds another decision.
      else +0 The else statement does not cause a new decision. The decision is at the if.
      for +1 There is a decision at the start of the loop.
      while +1 There is a decision at the while statement.
      except +1 Each except branch adds a new conditional path of execution.
      finally +0 The finally block is unconditionally executed.
      with +1 The with statement roughly corresponds to a try/except block (see PEP 343 for details).
      assert +1 The assert statement internally roughly equals a conditional statement.
      Comprehension +1 A list/set/dict comprehension of generator expression is equivalent to a for loop.
      Boolean Operator +1 Every boolean operator (and, or) adds a decision point.

      Source: http://radon.readthedocs.org/en/latest/intro.html

      Function start has a Cognitive Complexity of 22 (exceeds 5 allowed). Consider refactoring.
      Open

      def start():
    """TODO."""
    log.debug('Initializing Numbskull Minion Engine')
    ns_minion = NumbskullMinion()
    event_bus = salt.utils.event.get_event(
      Severity: Minor
      Found in salt/src/numbskull_minion.py - About 3 hrs to fix

      Cognitive Complexity

      Cognitive Complexity is a measure of how difficult a unit of code is to intuitively understand. Unlike Cyclomatic Complexity, which determines how difficult your code will be to test, Cognitive Complexity tells you how difficult your code will be to read and comprehend.

      A method's cognitive complexity is based on a few simple rules:

      • Code is not considered more complex when it uses shorthand that the language provides for collapsing multiple statements into one
      • Code is considered more complex for each "break in the linear flow of the code"
      • Code is considered more complex when "flow breaking structures are nested"

      Further reading

      Cyclomatic complexity is too high in function client. (13)
      Open

      def client(argv=None):
    """TODO."""
    parser = argparse.ArgumentParser(
        description="Run Gibbs worker",
        epilog="")
      Severity: Minor
      Found in numbskull/distributed.py by radon

      Cyclomatic Complexity

      Cyclomatic Complexity corresponds to the number of decisions a block of code contains plus 1. This number (also called McCabe number) is equal to the number of linearly independent paths through the code. This number can be used as a guide when testing conditional logic in blocks.

      Radon analyzes the AST tree of a Python program to compute Cyclomatic Complexity. Statements have the following effects on Cyclomatic Complexity:

      Construct Effect on CC Reasoning
      if +1 An if statement is a single decision.
      elif +1 The elif statement adds another decision.
      else +0 The else statement does not cause a new decision. The decision is at the if.
      for +1 There is a decision at the start of the loop.
      while +1 There is a decision at the while statement.
      except +1 Each except branch adds a new conditional path of execution.
      finally +0 The finally block is unconditionally executed.
      with +1 The with statement roughly corresponds to a try/except block (see PEP 343 for details).
      assert +1 The assert statement internally roughly equals a conditional statement.
      Comprehension +1 A list/set/dict comprehension of generator expression is equivalent to a for loop.
      Boolean Operator +1 Every boolean operator (and, or) adds a decision point.

      Source: http://radon.readthedocs.org/en/latest/intro.html

      Cyclomatic complexity is too high in function sample_and_sgd. (13)
      Open

      @jit(nopython=True, cache=True, nogil=True)
def sample_and_sgd(var_samp, step, regularization, reg_param, truncation,
                   var_copy, weight_copy, weight, variable, factor, fmap,
                   vmap, factor_index, Z, fids, var_value, var_value_evid,
                   weight_value, learn_non_evidence):
      Severity: Minor
      Found in numbskull/learning.py by radon

      Cyclomatic Complexity

      Cyclomatic Complexity corresponds to the number of decisions a block of code contains plus 1. This number (also called McCabe number) is equal to the number of linearly independent paths through the code. This number can be used as a guide when testing conditional logic in blocks.

      Radon analyzes the AST tree of a Python program to compute Cyclomatic Complexity. Statements have the following effects on Cyclomatic Complexity:

      Construct Effect on CC Reasoning
      if +1 An if statement is a single decision.
      elif +1 The elif statement adds another decision.
      else +0 The else statement does not cause a new decision. The decision is at the if.
      for +1 There is a decision at the start of the loop.
      while +1 There is a decision at the while statement.
      except +1 Each except branch adds a new conditional path of execution.
      finally +0 The finally block is unconditionally executed.
      with +1 The with statement roughly corresponds to a try/except block (see PEP 343 for details).
      assert +1 The assert statement internally roughly equals a conditional statement.
      Comprehension +1 A list/set/dict comprehension of generator expression is equivalent to a for loop.
      Boolean Operator +1 Every boolean operator (and, or) adds a decision point.

      Source: http://radon.readthedocs.org/en/latest/intro.html

      Cyclomatic complexity is too high in function server. (13)
      Open

      def server(argv=None):
    """TODO."""
    parser = argparse.ArgumentParser(
        description="Run Gibbs worker",
        epilog="")
      Severity: Minor
      Found in numbskull/distributed.py by radon

      Cyclomatic Complexity

      Cyclomatic Complexity corresponds to the number of decisions a block of code contains plus 1. This number (also called McCabe number) is equal to the number of linearly independent paths through the code. This number can be used as a guide when testing conditional logic in blocks.

      Radon analyzes the AST tree of a Python program to compute Cyclomatic Complexity. Statements have the following effects on Cyclomatic Complexity:

      Construct Effect on CC Reasoning
      if +1 An if statement is a single decision.
      elif +1 The elif statement adds another decision.
      else +0 The else statement does not cause a new decision. The decision is at the if.
      for +1 There is a decision at the start of the loop.
      while +1 There is a decision at the while statement.
      except +1 Each except branch adds a new conditional path of execution.
      finally +0 The finally block is unconditionally executed.
      with +1 The with statement roughly corresponds to a try/except block (see PEP 343 for details).
      assert +1 The assert statement internally roughly equals a conditional statement.
      Comprehension +1 A list/set/dict comprehension of generator expression is equivalent to a for loop.
      Boolean Operator +1 Every boolean operator (and, or) adds a decision point.

      Source: http://radon.readthedocs.org/en/latest/intro.html

      Function get_factors has a Cognitive Complexity of 21 (exceeds 5 allowed). Consider refactoring.
      Open

      def get_factors(cur, views, sql_filter="True"):
    """TODO."""
    factors = 0
    edges = 0
      Severity: Minor
      Found in salt/src/messages.py - About 2 hrs to fix

      Cognitive Complexity

      Cognitive Complexity is a measure of how difficult a unit of code is to intuitively understand. Unlike Cyclomatic Complexity, which determines how difficult your code will be to test, Cognitive Complexity tells you how difficult your code will be to read and comprehend.

      A method's cognitive complexity is based on a few simple rules:

      • Code is not considered more complex when it uses shorthand that the language provides for collapsing multiple statements into one
      • Code is considered more complex for each "break in the linear flow of the code"
      • Code is considered more complex when "flow breaking structures are nested"

      Further reading

      Severity
      Category
      Status
      Source
      Language