Sign upLogin

IRC-SPHERE/HyperStream

View on GitHub
Star
hyperstream/factor/factor.py

Summary

Maintainability
F
1 wk
Test Coverage

Function execute has a Cognitive Complexity of 80 (exceeds 5 allowed). Consider refactoring.
Open

    def execute(self, time_interval):
        """
        Execute the factor over the given time interval

        :param time_interval:
Severity: Minor
Found in hyperstream/factor/factor.py - About 1 day to fix

Cognitive Complexity

Cognitive Complexity is a measure of how difficult a unit of code is to intuitively understand. Unlike Cyclomatic Complexity, which determines how difficult your code will be to test, Cognitive Complexity tells you how difficult your code will be to read and comprehend.

A method's cognitive complexity is based on a few simple rules:

  • Code is not considered more complex when it uses shorthand that the language provides for collapsing multiple statements into one
  • Code is considered more complex for each "break in the linear flow of the code"
  • Code is considered more complex when "flow breaking structures are nested"

Further reading

Cyclomatic complexity is too high in method execute. (46)
Open

    def execute(self, time_interval):
        """
        Execute the factor over the given time interval

        :param time_interval:
Severity: Minor
Found in hyperstream/factor/factor.py by radon

Cyclomatic Complexity

Cyclomatic Complexity corresponds to the number of decisions a block of code contains plus 1. This number (also called McCabe number) is equal to the number of linearly independent paths through the code. This number can be used as a guide when testing conditional logic in blocks.

Radon analyzes the AST tree of a Python program to compute Cyclomatic Complexity. Statements have the following effects on Cyclomatic Complexity:

Construct Effect on CC Reasoning
if +1 An if statement is a single decision.
elif +1 The elif statement adds another decision.
else +0 The else statement does not cause a new decision. The decision is at the if.
for +1 There is a decision at the start of the loop.
while +1 There is a decision at the while statement.
except +1 Each except branch adds a new conditional path of execution.
finally +0 The finally block is unconditionally executed.
with +1 The with statement roughly corresponds to a try/except block (see PEP 343 for details).
assert +1 The assert statement internally roughly equals a conditional statement.
Comprehension +1 A list/set/dict comprehension of generator expression is equivalent to a for loop.
Boolean Operator +1 Every boolean operator (and, or) adds a decision point.

Source: http://radon.readthedocs.org/en/latest/intro.html

File factor.py has 432 lines of code (exceeds 250 allowed). Consider refactoring.
Open

# The MIT License (MIT)
# Copyright (c) 2014-2017 University of Bristol
# 
# Permission is hereby granted, free of charge, to any person obtaining a copy
# of this software and associated documentation files (the "Software"), to deal
Severity: Minor
Found in hyperstream/factor/factor.py - About 6 hrs to fix

Function execute has a Cognitive Complexity of 41 (exceeds 5 allowed). Consider refactoring.
Open

    def execute(self, time_interval):
        """
        Execute the factor over the given time interval. Note that this is normally done by the workflow,
        but can also be done on the factor directly
Severity: Minor
Found in hyperstream/factor/factor.py - About 6 hrs to fix

Cognitive Complexity

Cognitive Complexity is a measure of how difficult a unit of code is to intuitively understand. Unlike Cyclomatic Complexity, which determines how difficult your code will be to test, Cognitive Complexity tells you how difficult your code will be to read and comprehend.

A method's cognitive complexity is based on a few simple rules:

  • Code is not considered more complex when it uses shorthand that the language provides for collapsing multiple statements into one
  • Code is considered more complex for each "break in the linear flow of the code"
  • Code is considered more complex when "flow breaking structures are nested"

Further reading

Cyclomatic complexity is too high in method execute. (18)
Open

    def execute(self, time_interval):
        """
        Execute the factor over the given time interval. Note that this is normally done by the workflow,
        but can also be done on the factor directly
Severity: Minor
Found in hyperstream/factor/factor.py by radon

Cyclomatic Complexity

Cyclomatic Complexity corresponds to the number of decisions a block of code contains plus 1. This number (also called McCabe number) is equal to the number of linearly independent paths through the code. This number can be used as a guide when testing conditional logic in blocks.

Radon analyzes the AST tree of a Python program to compute Cyclomatic Complexity. Statements have the following effects on Cyclomatic Complexity:

Construct Effect on CC Reasoning
if +1 An if statement is a single decision.
elif +1 The elif statement adds another decision.
else +0 The else statement does not cause a new decision. The decision is at the if.
for +1 There is a decision at the start of the loop.
while +1 There is a decision at the while statement.
except +1 Each except branch adds a new conditional path of execution.
finally +0 The finally block is unconditionally executed.
with +1 The with statement roughly corresponds to a try/except block (see PEP 343 for details).
assert +1 The assert statement internally roughly equals a conditional statement.
Comprehension +1 A list/set/dict comprehension of generator expression is equivalent to a for loop.
Boolean Operator +1 Every boolean operator (and, or) adds a decision point.

Source: http://radon.readthedocs.org/en/latest/intro.html

Function execute has a Cognitive Complexity of 24 (exceeds 5 allowed). Consider refactoring.
Open

    def execute(self, time_interval):
        """
        Execute the factor over the given time interval. Note that this is normally done by the workflow,
        but can also be done on the factor directly
Severity: Minor
Found in hyperstream/factor/factor.py - About 3 hrs to fix

Cognitive Complexity

Cognitive Complexity is a measure of how difficult a unit of code is to intuitively understand. Unlike Cyclomatic Complexity, which determines how difficult your code will be to test, Cognitive Complexity tells you how difficult your code will be to read and comprehend.

A method's cognitive complexity is based on a few simple rules:

  • Code is not considered more complex when it uses shorthand that the language provides for collapsing multiple statements into one
  • Code is considered more complex for each "break in the linear flow of the code"
  • Code is considered more complex when "flow breaking structures are nested"

Further reading

Cyclomatic complexity is too high in class Factor. (15)
Open

class Factor(FactorBase):
    """
    A factor in the graph. This defines the element of computation: the tool along with the source and sink nodes.
    """
Severity: Minor
Found in hyperstream/factor/factor.py by radon

Cyclomatic Complexity

Cyclomatic Complexity corresponds to the number of decisions a block of code contains plus 1. This number (also called McCabe number) is equal to the number of linearly independent paths through the code. This number can be used as a guide when testing conditional logic in blocks.

Radon analyzes the AST tree of a Python program to compute Cyclomatic Complexity. Statements have the following effects on Cyclomatic Complexity:

Construct Effect on CC Reasoning
if +1 An if statement is a single decision.
elif +1 The elif statement adds another decision.
else +0 The else statement does not cause a new decision. The decision is at the if.
for +1 There is a decision at the start of the loop.
while +1 There is a decision at the while statement.
except +1 Each except branch adds a new conditional path of execution.
finally +0 The finally block is unconditionally executed.
with +1 The with statement roughly corresponds to a try/except block (see PEP 343 for details).
assert +1 The assert statement internally roughly equals a conditional statement.
Comprehension +1 A list/set/dict comprehension of generator expression is equivalent to a for loop.
Boolean Operator +1 Every boolean operator (and, or) adds a decision point.

Source: http://radon.readthedocs.org/en/latest/intro.html

Cyclomatic complexity is too high in method __init__. (13)
Open

    def __init__(self, tool, source_nodes, sink_node, alignment_node, plates):
        """
        Initialise this factor

        :param tool: The tool
Severity: Minor
Found in hyperstream/factor/factor.py by radon

Cyclomatic Complexity

Cyclomatic Complexity corresponds to the number of decisions a block of code contains plus 1. This number (also called McCabe number) is equal to the number of linearly independent paths through the code. This number can be used as a guide when testing conditional logic in blocks.

Radon analyzes the AST tree of a Python program to compute Cyclomatic Complexity. Statements have the following effects on Cyclomatic Complexity:

Construct Effect on CC Reasoning
if +1 An if statement is a single decision.
elif +1 The elif statement adds another decision.
else +0 The else statement does not cause a new decision. The decision is at the if.
for +1 There is a decision at the start of the loop.
while +1 There is a decision at the while statement.
except +1 Each except branch adds a new conditional path of execution.
finally +0 The finally block is unconditionally executed.
with +1 The with statement roughly corresponds to a try/except block (see PEP 343 for details).
assert +1 The assert statement internally roughly equals a conditional statement.
Comprehension +1 A list/set/dict comprehension of generator expression is equivalent to a for loop.
Boolean Operator +1 Every boolean operator (and, or) adds a decision point.

Source: http://radon.readthedocs.org/en/latest/intro.html

Cyclomatic complexity is too high in method execute. (13)
Open

    def execute(self, time_interval):
        """
        Execute the factor over the given time interval. Note that this is normally done by the workflow,
        but can also be done on the factor directly
Severity: Minor
Found in hyperstream/factor/factor.py by radon

Cyclomatic Complexity

Cyclomatic Complexity corresponds to the number of decisions a block of code contains plus 1. This number (also called McCabe number) is equal to the number of linearly independent paths through the code. This number can be used as a guide when testing conditional logic in blocks.

Radon analyzes the AST tree of a Python program to compute Cyclomatic Complexity. Statements have the following effects on Cyclomatic Complexity:

Construct Effect on CC Reasoning
if +1 An if statement is a single decision.
elif +1 The elif statement adds another decision.
else +0 The else statement does not cause a new decision. The decision is at the if.
for +1 There is a decision at the start of the loop.
while +1 There is a decision at the while statement.
except +1 Each except branch adds a new conditional path of execution.
finally +0 The finally block is unconditionally executed.
with +1 The with statement roughly corresponds to a try/except block (see PEP 343 for details).
assert +1 The assert statement internally roughly equals a conditional statement.
Comprehension +1 A list/set/dict comprehension of generator expression is equivalent to a for loop.
Boolean Operator +1 Every boolean operator (and, or) adds a decision point.

Source: http://radon.readthedocs.org/en/latest/intro.html

Cyclomatic complexity is too high in method get_splitting_stream. (13)
Open

    def get_splitting_stream(self, input_plate_value):
        """
        Get the splitting stream

        :param input_plate_value: The input plate value
Severity: Minor
Found in hyperstream/factor/factor.py by radon

Cyclomatic Complexity

Cyclomatic Complexity corresponds to the number of decisions a block of code contains plus 1. This number (also called McCabe number) is equal to the number of linearly independent paths through the code. This number can be used as a guide when testing conditional logic in blocks.

Radon analyzes the AST tree of a Python program to compute Cyclomatic Complexity. Statements have the following effects on Cyclomatic Complexity:

Construct Effect on CC Reasoning
if +1 An if statement is a single decision.
elif +1 The elif statement adds another decision.
else +0 The else statement does not cause a new decision. The decision is at the if.
for +1 There is a decision at the start of the loop.
while +1 There is a decision at the while statement.
except +1 Each except branch adds a new conditional path of execution.
finally +0 The finally block is unconditionally executed.
with +1 The with statement roughly corresponds to a try/except block (see PEP 343 for details).
assert +1 The assert statement internally roughly equals a conditional statement.
Comprehension +1 A list/set/dict comprehension of generator expression is equivalent to a for loop.
Boolean Operator +1 Every boolean operator (and, or) adds a decision point.

Source: http://radon.readthedocs.org/en/latest/intro.html

Cyclomatic complexity is too high in class NodeCreationFactor. (12)
Open

class NodeCreationFactor(FactorBase):
    def __init__(self, tool, source_node, input_plate, output_plate, plate_manager):
        """
        Initialise this factor
Severity: Minor
Found in hyperstream/factor/factor.py by radon

Cyclomatic Complexity

Cyclomatic Complexity corresponds to the number of decisions a block of code contains plus 1. This number (also called McCabe number) is equal to the number of linearly independent paths through the code. This number can be used as a guide when testing conditional logic in blocks.

Radon analyzes the AST tree of a Python program to compute Cyclomatic Complexity. Statements have the following effects on Cyclomatic Complexity:

Construct Effect on CC Reasoning
if +1 An if statement is a single decision.
elif +1 The elif statement adds another decision.
else +0 The else statement does not cause a new decision. The decision is at the if.
for +1 There is a decision at the start of the loop.
while +1 There is a decision at the while statement.
except +1 Each except branch adds a new conditional path of execution.
finally +0 The finally block is unconditionally executed.
with +1 The with statement roughly corresponds to a try/except block (see PEP 343 for details).
assert +1 The assert statement internally roughly equals a conditional statement.
Comprehension +1 A list/set/dict comprehension of generator expression is equivalent to a for loop.
Boolean Operator +1 Every boolean operator (and, or) adds a decision point.

Source: http://radon.readthedocs.org/en/latest/intro.html

Cyclomatic complexity is too high in method get_sources. (10)
Open

    def get_sources(self, plate, plate_value, sources=None):
        """
        Gets the source streams for a given plate value on a plate.
        Also populates with source streams that are valid for the parent plates of this plate,
        with the appropriate meta-data for the parent plate.
Severity: Minor
Found in hyperstream/factor/factor.py by radon

Cyclomatic Complexity

Cyclomatic Complexity corresponds to the number of decisions a block of code contains plus 1. This number (also called McCabe number) is equal to the number of linearly independent paths through the code. This number can be used as a guide when testing conditional logic in blocks.

Radon analyzes the AST tree of a Python program to compute Cyclomatic Complexity. Statements have the following effects on Cyclomatic Complexity:

Construct Effect on CC Reasoning
if +1 An if statement is a single decision.
elif +1 The elif statement adds another decision.
else +0 The else statement does not cause a new decision. The decision is at the if.
for +1 There is a decision at the start of the loop.
while +1 There is a decision at the while statement.
except +1 Each except branch adds a new conditional path of execution.
finally +0 The finally block is unconditionally executed.
with +1 The with statement roughly corresponds to a try/except block (see PEP 343 for details).
assert +1 The assert statement internally roughly equals a conditional statement.
Comprehension +1 A list/set/dict comprehension of generator expression is equivalent to a for loop.
Boolean Operator +1 Every boolean operator (and, or) adds a decision point.

Source: http://radon.readthedocs.org/en/latest/intro.html

Cyclomatic complexity is too high in method __init__. (9)
Open

    def __init__(self, tool, source_node, splitting_node, sink_node, input_plate, output_plates):
        """
        Initialise this factor

        :param tool: The tool
Severity: Minor
Found in hyperstream/factor/factor.py by radon

Cyclomatic Complexity

Cyclomatic Complexity corresponds to the number of decisions a block of code contains plus 1. This number (also called McCabe number) is equal to the number of linearly independent paths through the code. This number can be used as a guide when testing conditional logic in blocks.

Radon analyzes the AST tree of a Python program to compute Cyclomatic Complexity. Statements have the following effects on Cyclomatic Complexity:

Construct Effect on CC Reasoning
if +1 An if statement is a single decision.
elif +1 The elif statement adds another decision.
else +0 The else statement does not cause a new decision. The decision is at the if.
for +1 There is a decision at the start of the loop.
while +1 There is a decision at the while statement.
except +1 Each except branch adds a new conditional path of execution.
finally +0 The finally block is unconditionally executed.
with +1 The with statement roughly corresponds to a try/except block (see PEP 343 for details).
assert +1 The assert statement internally roughly equals a conditional statement.
Comprehension +1 A list/set/dict comprehension of generator expression is equivalent to a for loop.
Boolean Operator +1 Every boolean operator (and, or) adds a decision point.

Source: http://radon.readthedocs.org/en/latest/intro.html

Cyclomatic complexity is too high in class MultiOutputFactor. (8)
Open

class MultiOutputFactor(FactorBase):
    """
    A multi-output factor in the graph.
    As with a factor, this links source nodes to sink nodes. However in this case the source node is being split onto
    multiple plates.
Severity: Minor
Found in hyperstream/factor/factor.py by radon

Cyclomatic Complexity

Cyclomatic Complexity corresponds to the number of decisions a block of code contains plus 1. This number (also called McCabe number) is equal to the number of linearly independent paths through the code. This number can be used as a guide when testing conditional logic in blocks.

Radon analyzes the AST tree of a Python program to compute Cyclomatic Complexity. Statements have the following effects on Cyclomatic Complexity:

Construct Effect on CC Reasoning
if +1 An if statement is a single decision.
elif +1 The elif statement adds another decision.
else +0 The else statement does not cause a new decision. The decision is at the if.
for +1 There is a decision at the start of the loop.
while +1 There is a decision at the while statement.
except +1 Each except branch adds a new conditional path of execution.
finally +0 The finally block is unconditionally executed.
with +1 The with statement roughly corresponds to a try/except block (see PEP 343 for details).
assert +1 The assert statement internally roughly equals a conditional statement.
Comprehension +1 A list/set/dict comprehension of generator expression is equivalent to a for loop.
Boolean Operator +1 Every boolean operator (and, or) adds a decision point.

Source: http://radon.readthedocs.org/en/latest/intro.html

Function get_splitting_stream has a Cognitive Complexity of 16 (exceeds 5 allowed). Consider refactoring.
Open

    def get_splitting_stream(self, input_plate_value):
        """
        Get the splitting stream

        :param input_plate_value: The input plate value
Severity: Minor
Found in hyperstream/factor/factor.py - About 2 hrs to fix

Cognitive Complexity

Cognitive Complexity is a measure of how difficult a unit of code is to intuitively understand. Unlike Cyclomatic Complexity, which determines how difficult your code will be to test, Cognitive Complexity tells you how difficult your code will be to read and comprehend.

A method's cognitive complexity is based on a few simple rules:

  • Code is not considered more complex when it uses shorthand that the language provides for collapsing multiple statements into one
  • Code is considered more complex for each "break in the linear flow of the code"
  • Code is considered more complex when "flow breaking structures are nested"

Further reading

Cyclomatic complexity is too high in method __init__. (6)
Open

    def __init__(self, tool, source_node, input_plate, output_plate, plate_manager):
        """
        Initialise this factor

        :param tool: The tool
Severity: Minor
Found in hyperstream/factor/factor.py by radon

Cyclomatic Complexity

Cyclomatic Complexity corresponds to the number of decisions a block of code contains plus 1. This number (also called McCabe number) is equal to the number of linearly independent paths through the code. This number can be used as a guide when testing conditional logic in blocks.

Radon analyzes the AST tree of a Python program to compute Cyclomatic Complexity. Statements have the following effects on Cyclomatic Complexity:

Construct Effect on CC Reasoning
if +1 An if statement is a single decision.
elif +1 The elif statement adds another decision.
else +0 The else statement does not cause a new decision. The decision is at the if.
for +1 There is a decision at the start of the loop.
while +1 There is a decision at the while statement.
except +1 Each except branch adds a new conditional path of execution.
finally +0 The finally block is unconditionally executed.
with +1 The with statement roughly corresponds to a try/except block (see PEP 343 for details).
assert +1 The assert statement internally roughly equals a conditional statement.
Comprehension +1 A list/set/dict comprehension of generator expression is equivalent to a for loop.
Boolean Operator +1 Every boolean operator (and, or) adds a decision point.

Source: http://radon.readthedocs.org/en/latest/intro.html

Function __init__ has a Cognitive Complexity of 14 (exceeds 5 allowed). Consider refactoring.
Open

    def __init__(self, tool, source_nodes, sink_node, alignment_node, plates):
        """
        Initialise this factor

        :param tool: The tool
Severity: Minor
Found in hyperstream/factor/factor.py - About 1 hr to fix

Cognitive Complexity

Cognitive Complexity is a measure of how difficult a unit of code is to intuitively understand. Unlike Cyclomatic Complexity, which determines how difficult your code will be to test, Cognitive Complexity tells you how difficult your code will be to read and comprehend.

A method's cognitive complexity is based on a few simple rules:

  • Code is not considered more complex when it uses shorthand that the language provides for collapsing multiple statements into one
  • Code is considered more complex for each "break in the linear flow of the code"
  • Code is considered more complex when "flow breaking structures are nested"

Further reading

Consider simplifying this complex logical expression.
Open

                if (counts == [1, 1] and is_sub_plate) or \
                    (len(self.sink.plates)==1 and counts == [1, 0] and is_sub_plate) or \
                    (next(p.is_root for p in self.sources[-1].plates)
                     and len(self.sink.plates) == 1
                     and self.sink.plates[0] in self.sources[-1].plates):
Severity: Critical
Found in hyperstream/factor/factor.py - About 1 hr to fix

Function get_sources has a Cognitive Complexity of 11 (exceeds 5 allowed). Consider refactoring.
Open

    def get_sources(self, plate, plate_value, sources=None):
        """
        Gets the source streams for a given plate value on a plate.
        Also populates with source streams that are valid for the parent plates of this plate,
        with the appropriate meta-data for the parent plate.
Severity: Minor
Found in hyperstream/factor/factor.py - About 1 hr to fix

Cognitive Complexity

Cognitive Complexity is a measure of how difficult a unit of code is to intuitively understand. Unlike Cyclomatic Complexity, which determines how difficult your code will be to test, Cognitive Complexity tells you how difficult your code will be to read and comprehend.

A method's cognitive complexity is based on a few simple rules:

  • Code is not considered more complex when it uses shorthand that the language provides for collapsing multiple statements into one
  • Code is considered more complex for each "break in the linear flow of the code"
  • Code is considered more complex when "flow breaking structures are nested"

Further reading

Avoid deeply nested control flow statements.
Open

                        if source_plates == self_plates:
                            # This is the case where the sources are all on separate plates and the sink is the
                            # combination
                            search = [[x[0] for x in p.values] for p in self.plates]
                            _pv = sorted(itertools.product(*search))
Severity: Major
Found in hyperstream/factor/factor.py - About 45 mins to fix

Function __init__ has 6 arguments (exceeds 4 allowed). Consider refactoring.
Open

    def __init__(self, tool, source_node, splitting_node, sink_node, input_plate, output_plates):
Severity: Minor
Found in hyperstream/factor/factor.py - About 45 mins to fix

Function __init__ has 5 arguments (exceeds 4 allowed). Consider refactoring.
Open

    def __init__(self, tool, source_node, input_plate, output_plate, plate_manager):
Severity: Minor
Found in hyperstream/factor/factor.py - About 35 mins to fix

Function __init__ has 5 arguments (exceeds 4 allowed). Consider refactoring.
Open

    def __init__(self, tool, source_nodes, sink_node, alignment_node, plates):
Severity: Minor
Found in hyperstream/factor/factor.py - About 35 mins to fix

Function __init__ has a Cognitive Complexity of 7 (exceeds 5 allowed). Consider refactoring.
Open

    def __init__(self, tool, source_node, splitting_node, sink_node, input_plate, output_plates):
        """
        Initialise this factor

        :param tool: The tool
Severity: Minor
Found in hyperstream/factor/factor.py - About 35 mins to fix

Cognitive Complexity

Cognitive Complexity is a measure of how difficult a unit of code is to intuitively understand. Unlike Cyclomatic Complexity, which determines how difficult your code will be to test, Cognitive Complexity tells you how difficult your code will be to read and comprehend.

A method's cognitive complexity is based on a few simple rules:

  • Code is not considered more complex when it uses shorthand that the language provides for collapsing multiple statements into one
  • Code is considered more complex for each "break in the linear flow of the code"
  • Code is considered more complex when "flow breaking structures are nested"

Further reading

Function get_global_sources has a Cognitive Complexity of 6 (exceeds 5 allowed). Consider refactoring.
Open

    def get_global_sources(self):
        """
        Gets streams that live outside of the plates

        :return: Global streams
Severity: Minor
Found in hyperstream/factor/factor.py - About 25 mins to fix

Cognitive Complexity

Cognitive Complexity is a measure of how difficult a unit of code is to intuitively understand. Unlike Cyclomatic Complexity, which determines how difficult your code will be to test, Cognitive Complexity tells you how difficult your code will be to read and comprehend.

A method's cognitive complexity is based on a few simple rules:

  • Code is not considered more complex when it uses shorthand that the language provides for collapsing multiple statements into one
  • Code is considered more complex for each "break in the linear flow of the code"
  • Code is considered more complex when "flow breaking structures are nested"

Further reading

TODO found
Open

            # TODO: Need to implement alignment nodes that live inside plates
Severity: Minor
Found in hyperstream/factor/factor.py by fixme

TODO found
Open

            # TODO: Need to implement alignment nodes that live inside plates
Severity: Minor
Found in hyperstream/factor/factor.py by fixme

TODO found
Open

                # TODO: This sub-plate selection is deprecated
Severity: Minor
Found in hyperstream/factor/factor.py by fixme

TODO found
Open

                # TODO: This loop over plates is probably not correct:
Severity: Minor
Found in hyperstream/factor/factor.py by fixme

TODO found
Open

            # TODO: Need to implement alignment nodes that live inside plates
Severity: Minor
Found in hyperstream/factor/factor.py by fixme

TODO found
Open

                # TODO: This needs checking - is the logic still the same as for the case above?
Severity: Minor
Found in hyperstream/factor/factor.py by fixme

TODO found
Open

        # TODO: The input plate should be a parent of the output plate
Severity: Minor
Found in hyperstream/factor/factor.py by fixme

TODO found
Open

                    # # TODO - determine whether this should raise an exception or not, or even log a warning
Severity: Minor
Found in hyperstream/factor/factor.py by fixme

Identical blocks of code found in 2 locations. Consider refactoring.
Open

    def get_alignment_stream(self, plate=None, plate_value=None):
        """
        Gets the alignment stream for a particular plate value

        :param plate: The plate on which the alignment node lives
Severity: Major
Found in hyperstream/factor/factor.py and 1 other location - About 3 hrs to fix
hyperstream/factor/factor.py on lines 255..268

Duplicated Code

Duplicated code can lead to software that is hard to understand and difficult to change. The Don't Repeat Yourself (DRY) principle states:

Every piece of knowledge must have a single, unambiguous, authoritative representation within a system.

When you violate DRY, bugs and maintenance problems are sure to follow. Duplicated code has a tendency to both continue to replicate and also to diverge (leaving bugs as two similar implementations differ in subtle ways).

Tuning

This issue has a mass of 68.

We set useful threshold defaults for the languages we support but you may want to adjust these settings based on your project guidelines.

The threshold configuration represents the minimum mass a code block must have to be analyzed for duplication. The lower the threshold, the more fine-grained the comparison.

If the engine is too easily reporting duplication, try raising the threshold. If you suspect that the engine isn't catching enough duplication, try lowering the threshold. The best setting tends to differ from language to language.

See codeclimate-duplication's documentation for more information about tuning the mass threshold in your .codeclimate.yml.

Refactorings

Further Reading

Identical blocks of code found in 2 locations. Consider refactoring.
Open

    def get_alignment_stream(self, plate=None, plate_value=None):
        """
        Gets the alignment stream for a particular plate value

        :param plate: The plate on which the alignment node lives
Severity: Major
Found in hyperstream/factor/factor.py and 1 other location - About 3 hrs to fix
hyperstream/factor/factor.py on lines 453..466

Duplicated Code

Duplicated code can lead to software that is hard to understand and difficult to change. The Don't Repeat Yourself (DRY) principle states:

Every piece of knowledge must have a single, unambiguous, authoritative representation within a system.

When you violate DRY, bugs and maintenance problems are sure to follow. Duplicated code has a tendency to both continue to replicate and also to diverge (leaving bugs as two similar implementations differ in subtle ways).

Tuning

This issue has a mass of 68.

We set useful threshold defaults for the languages we support but you may want to adjust these settings based on your project guidelines.

The threshold configuration represents the minimum mass a code block must have to be analyzed for duplication. The lower the threshold, the more fine-grained the comparison.

If the engine is too easily reporting duplication, try raising the threshold. If you suspect that the engine isn't catching enough duplication, try lowering the threshold. The best setting tends to differ from language to language.

See codeclimate-duplication's documentation for more information about tuning the mass threshold in your .codeclimate.yml.

Refactorings

Further Reading

Similar blocks of code found in 2 locations. Consider refactoring.
Open

                if ipv in self.source.streams:
                    source = self.source.streams[ipv]
                else:
                    logging.warn("{} with value {} not valid for source {}".format(
                        self.input_plate, ipv, self.source))
Severity: Major
Found in hyperstream/factor/factor.py and 1 other location - About 2 hrs to fix
hyperstream/factor/factor.py on lines 357..364

Duplicated Code

Duplicated code can lead to software that is hard to understand and difficult to change. The Don't Repeat Yourself (DRY) principle states:

Every piece of knowledge must have a single, unambiguous, authoritative representation within a system.

When you violate DRY, bugs and maintenance problems are sure to follow. Duplicated code has a tendency to both continue to replicate and also to diverge (leaving bugs as two similar implementations differ in subtle ways).

Tuning

This issue has a mass of 52.

We set useful threshold defaults for the languages we support but you may want to adjust these settings based on your project guidelines.

The threshold configuration represents the minimum mass a code block must have to be analyzed for duplication. The lower the threshold, the more fine-grained the comparison.

If the engine is too easily reporting duplication, try raising the threshold. If you suspect that the engine isn't catching enough duplication, try lowering the threshold. The best setting tends to differ from language to language.

See codeclimate-duplication's documentation for more information about tuning the mass threshold in your .codeclimate.yml.

Refactorings

Further Reading

Similar blocks of code found in 2 locations. Consider refactoring.
Open

            if not self.source:
                source = None
            elif input_plate_value in self.source.streams:
                source = self.source.streams[input_plate_value]
            else:
Severity: Major
Found in hyperstream/factor/factor.py and 1 other location - About 2 hrs to fix
hyperstream/factor/factor.py on lines 517..522

Duplicated Code

Duplicated code can lead to software that is hard to understand and difficult to change. The Don't Repeat Yourself (DRY) principle states:

Every piece of knowledge must have a single, unambiguous, authoritative representation within a system.

When you violate DRY, bugs and maintenance problems are sure to follow. Duplicated code has a tendency to both continue to replicate and also to diverge (leaving bugs as two similar implementations differ in subtle ways).

Tuning

This issue has a mass of 52.

We set useful threshold defaults for the languages we support but you may want to adjust these settings based on your project guidelines.

The threshold configuration represents the minimum mass a code block must have to be analyzed for duplication. The lower the threshold, the more fine-grained the comparison.

If the engine is too easily reporting duplication, try raising the threshold. If you suspect that the engine isn't catching enough duplication, try lowering the threshold. The best setting tends to differ from language to language.

See codeclimate-duplication's documentation for more information about tuning the mass threshold in your .codeclimate.yml.

Refactorings

Further Reading

Similar blocks of code found in 2 locations. Consider refactoring.
Open

        if input_plate is not None and not isinstance(input_plate, Plate):
            raise ValueError("Expected plate, got {}".format(type(source_node)))
Severity: Major
Found in hyperstream/factor/factor.py and 1 other location - About 1 hr to fix
hyperstream/factor/factor.py on lines 489..490

Duplicated Code

Duplicated code can lead to software that is hard to understand and difficult to change. The Don't Repeat Yourself (DRY) principle states:

Every piece of knowledge must have a single, unambiguous, authoritative representation within a system.

When you violate DRY, bugs and maintenance problems are sure to follow. Duplicated code has a tendency to both continue to replicate and also to diverge (leaving bugs as two similar implementations differ in subtle ways).

Tuning

This issue has a mass of 41.

We set useful threshold defaults for the languages we support but you may want to adjust these settings based on your project guidelines.

The threshold configuration represents the minimum mass a code block must have to be analyzed for duplication. The lower the threshold, the more fine-grained the comparison.

If the engine is too easily reporting duplication, try raising the threshold. If you suspect that the engine isn't catching enough duplication, try lowering the threshold. The best setting tends to differ from language to language.

See codeclimate-duplication's documentation for more information about tuning the mass threshold in your .codeclimate.yml.

Refactorings

Further Reading

Similar blocks of code found in 2 locations. Consider refactoring.
Open

        if source_node is not None and not isinstance(source_node, Node):
            raise ValueError("Expected node, got {}".format(type(source_node)))
Severity: Major
Found in hyperstream/factor/factor.py and 1 other location - About 1 hr to fix
hyperstream/factor/factor.py on lines 492..493

Duplicated Code

Duplicated code can lead to software that is hard to understand and difficult to change. The Don't Repeat Yourself (DRY) principle states:

Every piece of knowledge must have a single, unambiguous, authoritative representation within a system.

When you violate DRY, bugs and maintenance problems are sure to follow. Duplicated code has a tendency to both continue to replicate and also to diverge (leaving bugs as two similar implementations differ in subtle ways).

Tuning

This issue has a mass of 41.

We set useful threshold defaults for the languages we support but you may want to adjust these settings based on your project guidelines.

The threshold configuration represents the minimum mass a code block must have to be analyzed for duplication. The lower the threshold, the more fine-grained the comparison.

If the engine is too easily reporting duplication, try raising the threshold. If you suspect that the engine isn't catching enough duplication, try lowering the threshold. The best setting tends to differ from language to language.

See codeclimate-duplication's documentation for more information about tuning the mass threshold in your .codeclimate.yml.

Refactorings

Further Reading

Identical blocks of code found in 2 locations. Consider refactoring.
Open

                ppv = filter(lambda x: all(p in input_plate_value for p in x), self.input_plate.parent.values)
Severity: Major
Found in hyperstream/factor/factor.py and 1 other location - About 1 hr to fix
hyperstream/factor/factor.py on lines 428..428

Duplicated Code

Duplicated code can lead to software that is hard to understand and difficult to change. The Don't Repeat Yourself (DRY) principle states:

Every piece of knowledge must have a single, unambiguous, authoritative representation within a system.

When you violate DRY, bugs and maintenance problems are sure to follow. Duplicated code has a tendency to both continue to replicate and also to diverge (leaving bugs as two similar implementations differ in subtle ways).

Tuning

This issue has a mass of 40.

We set useful threshold defaults for the languages we support but you may want to adjust these settings based on your project guidelines.

The threshold configuration represents the minimum mass a code block must have to be analyzed for duplication. The lower the threshold, the more fine-grained the comparison.

If the engine is too easily reporting duplication, try raising the threshold. If you suspect that the engine isn't catching enough duplication, try lowering the threshold. The best setting tends to differ from language to language.

See codeclimate-duplication's documentation for more information about tuning the mass threshold in your .codeclimate.yml.

Refactorings

Further Reading

Identical blocks of code found in 2 locations. Consider refactoring.
Open

                ppv = filter(lambda x: all(p in input_plate_value for p in x), self.input_plate.parent.values)
Severity: Major
Found in hyperstream/factor/factor.py and 1 other location - About 1 hr to fix
hyperstream/factor/factor.py on lines 419..419

Duplicated Code

Duplicated code can lead to software that is hard to understand and difficult to change. The Don't Repeat Yourself (DRY) principle states:

Every piece of knowledge must have a single, unambiguous, authoritative representation within a system.

When you violate DRY, bugs and maintenance problems are sure to follow. Duplicated code has a tendency to both continue to replicate and also to diverge (leaving bugs as two similar implementations differ in subtle ways).

Tuning

This issue has a mass of 40.

We set useful threshold defaults for the languages we support but you may want to adjust these settings based on your project guidelines.

The threshold configuration represents the minimum mass a code block must have to be analyzed for duplication. The lower the threshold, the more fine-grained the comparison.

If the engine is too easily reporting duplication, try raising the threshold. If you suspect that the engine isn't catching enough duplication, try lowering the threshold. The best setting tends to differ from language to language.

See codeclimate-duplication's documentation for more information about tuning the mass threshold in your .codeclimate.yml.

Refactorings

Further Reading

Similar blocks of code found in 4 locations. Consider refactoring.
Open

        if splitting_node and not isinstance(splitting_node, Node):
            raise ValueError("Expected node, got {}".format(type(splitting_node)))
Severity: Major
Found in hyperstream/factor/factor.py and 3 other locations - About 45 mins to fix
hyperstream/factor/factor.py on lines 84..85
hyperstream/factor/factor.py on lines 300..301
hyperstream/workflow/workflow.py on lines 307..308

Duplicated Code

Duplicated code can lead to software that is hard to understand and difficult to change. The Don't Repeat Yourself (DRY) principle states:

Every piece of knowledge must have a single, unambiguous, authoritative representation within a system.

When you violate DRY, bugs and maintenance problems are sure to follow. Duplicated code has a tendency to both continue to replicate and also to diverge (leaving bugs as two similar implementations differ in subtle ways).

Tuning

This issue has a mass of 35.

We set useful threshold defaults for the languages we support but you may want to adjust these settings based on your project guidelines.

The threshold configuration represents the minimum mass a code block must have to be analyzed for duplication. The lower the threshold, the more fine-grained the comparison.

If the engine is too easily reporting duplication, try raising the threshold. If you suspect that the engine isn't catching enough duplication, try lowering the threshold. The best setting tends to differ from language to language.

See codeclimate-duplication's documentation for more information about tuning the mass threshold in your .codeclimate.yml.

Refactorings

Further Reading

Similar blocks of code found in 4 locations. Consider refactoring.
Open

        if alignment_node and not isinstance(alignment_node, Node):
            raise ValueError("Expected node, got {}".format(type(alignment_node)))
Severity: Major
Found in hyperstream/factor/factor.py and 3 other locations - About 45 mins to fix
hyperstream/factor/factor.py on lines 300..301
hyperstream/factor/factor.py on lines 307..308
hyperstream/workflow/workflow.py on lines 307..308

Duplicated Code

Duplicated code can lead to software that is hard to understand and difficult to change. The Don't Repeat Yourself (DRY) principle states:

Every piece of knowledge must have a single, unambiguous, authoritative representation within a system.

When you violate DRY, bugs and maintenance problems are sure to follow. Duplicated code has a tendency to both continue to replicate and also to diverge (leaving bugs as two similar implementations differ in subtle ways).

Tuning

This issue has a mass of 35.

We set useful threshold defaults for the languages we support but you may want to adjust these settings based on your project guidelines.

The threshold configuration represents the minimum mass a code block must have to be analyzed for duplication. The lower the threshold, the more fine-grained the comparison.

If the engine is too easily reporting duplication, try raising the threshold. If you suspect that the engine isn't catching enough duplication, try lowering the threshold. The best setting tends to differ from language to language.

See codeclimate-duplication's documentation for more information about tuning the mass threshold in your .codeclimate.yml.

Refactorings

Further Reading

Similar blocks of code found in 4 locations. Consider refactoring.
Open

        if source_node and not isinstance(source_node, Node):
            raise ValueError("Expected node, got {}".format(type(source_node)))
Severity: Major
Found in hyperstream/factor/factor.py and 3 other locations - About 45 mins to fix
hyperstream/factor/factor.py on lines 84..85
hyperstream/factor/factor.py on lines 307..308
hyperstream/workflow/workflow.py on lines 307..308

Duplicated Code

Duplicated code can lead to software that is hard to understand and difficult to change. The Don't Repeat Yourself (DRY) principle states:

Every piece of knowledge must have a single, unambiguous, authoritative representation within a system.

When you violate DRY, bugs and maintenance problems are sure to follow. Duplicated code has a tendency to both continue to replicate and also to diverge (leaving bugs as two similar implementations differ in subtle ways).

Tuning

This issue has a mass of 35.

We set useful threshold defaults for the languages we support but you may want to adjust these settings based on your project guidelines.

The threshold configuration represents the minimum mass a code block must have to be analyzed for duplication. The lower the threshold, the more fine-grained the comparison.

If the engine is too easily reporting duplication, try raising the threshold. If you suspect that the engine isn't catching enough duplication, try lowering the threshold. The best setting tends to differ from language to language.

See codeclimate-duplication's documentation for more information about tuning the mass threshold in your .codeclimate.yml.

Refactorings

Further Reading

Blank line contains whitespace
Open
Severity: Minor
Found in hyperstream/factor/factor.py by pep8

Trailing whitespace is superfluous.

The warning returned varies on whether the line itself is blank,
for easier filtering for those who want to indent their blank lines.

Okay: spam(1)\n#
W291: spam(1) \n#
W293: class Foo(object):\n    \n    bang = 12

Line too long (93 > 79 characters)
Open

                        self.tool.execute(sources=sources, sink=sink, interval=time_interval,
Severity: Minor
Found in hyperstream/factor/factor.py by pep8

Limit all lines to a maximum of 79 characters.

There are still many devices around that are limited to 80 character
lines; plus, limiting windows to 80 characters makes it possible to
have several windows side-by-side.  The default wrapping on such
devices looks ugly.  Therefore, please limit all lines to a maximum
of 79 characters. For flowing long blocks of text (docstrings or
comments), limiting the length to 72 characters is recommended.

Reports error E501.

Line too long (111 > 79 characters)
Open

                            # This is the case where the sources are all on separate plates and the sink is the
Severity: Minor
Found in hyperstream/factor/factor.py by pep8

Limit all lines to a maximum of 79 characters.

There are still many devices around that are limited to 80 character
lines; plus, limiting windows to 80 characters makes it possible to
have several windows side-by-side.  The default wrapping on such
devices looks ugly.  Therefore, please limit all lines to a maximum
of 79 characters. For flowing long blocks of text (docstrings or
comments), limiting the length to 72 characters is recommended.

Reports error E501.

Line too long (84 > 79 characters)
Open

                            search = [[x[0] for x in p.values] for p in self.plates]
Severity: Minor
Found in hyperstream/factor/factor.py by pep8

Limit all lines to a maximum of 79 characters.

There are still many devices around that are limited to 80 character
lines; plus, limiting windows to 80 characters makes it possible to
have several windows side-by-side.  The default wrapping on such
devices looks ugly.  Therefore, please limit all lines to a maximum
of 79 characters. For flowing long blocks of text (docstrings or
comments), limiting the length to 72 characters is recommended.

Reports error E501.

Line too long (112 > 79 characters)
Open

                        raise IncompatiblePlatesError("Parent plate of output plate does not match input plate")
Severity: Minor
Found in hyperstream/factor/factor.py by pep8

Limit all lines to a maximum of 79 characters.

There are still many devices around that are limited to 80 character
lines; plus, limiting windows to 80 characters makes it possible to
have several windows side-by-side.  The default wrapping on such
devices looks ugly.  Therefore, please limit all lines to a maximum
of 79 characters. For flowing long blocks of text (docstrings or
comments), limiting the length to 72 characters is recommended.

Reports error E501.

Trailing whitespace
Open

#
Severity: Minor
Found in hyperstream/factor/factor.py by pep8

Trailing whitespace is superfluous.

The warning returned varies on whether the line itself is blank,
for easier filtering for those who want to indent their blank lines.

Okay: spam(1)\n#
W291: spam(1) \n#
W293: class Foo(object):\n    \n    bang = 12

Line too long (110 > 79 characters)
Open

        :param alignment_node: The node (possibly a clock node) that the output node will have data aligned to
Severity: Minor
Found in hyperstream/factor/factor.py by pep8

Limit all lines to a maximum of 79 characters.

There are still many devices around that are limited to 80 character
lines; plus, limiting windows to 80 characters makes it possible to
have several windows side-by-side.  The default wrapping on such
devices looks ugly.  Therefore, please limit all lines to a maximum
of 79 characters. For flowing long blocks of text (docstrings or
comments), limiting the length to 72 characters is recommended.

Reports error E501.

Line too long (84 > 79 characters)
Open

            raise IncompatibleToolError("Use MultiOutputFactor for MultiOutputTool")
Severity: Minor
Found in hyperstream/factor/factor.py by pep8

Limit all lines to a maximum of 79 characters.

There are still many devices around that are limited to 80 character
lines; plus, limiting windows to 80 characters makes it possible to
have several windows side-by-side.  The default wrapping on such
devices looks ugly.  Therefore, please limit all lines to a maximum
of 79 characters. For flowing long blocks of text (docstrings or
comments), limiting the length to 72 characters is recommended.

Reports error E501.

Line too long (97 > 79 characters)
Open

                                          alignment_stream=self.get_alignment_stream(None, None))
Severity: Minor
Found in hyperstream/factor/factor.py by pep8

Limit all lines to a maximum of 79 characters.

There are still many devices around that are limited to 80 character
lines; plus, limiting windows to 80 characters makes it possible to
have several windows side-by-side.  The default wrapping on such
devices looks ugly.  Therefore, please limit all lines to a maximum
of 79 characters. For flowing long blocks of text (docstrings or
comments), limiting the length to 72 characters is recommended.

Reports error E501.

Continuation line under-indented for visual indent
Open

                                                  alignment_stream=self.get_alignment_stream(None, None))
Severity: Minor
Found in hyperstream/factor/factor.py by pep8

Continuation lines indentation.

Continuation lines should align wrapped elements either vertically
using Python's implicit line joining inside parentheses, brackets
and braces, or using a hanging indent.

When using a hanging indent these considerations should be applied:
- there should be no arguments on the first line, and
- further indentation should be used to clearly distinguish itself
  as a continuation line.

Okay: a = (\n)
E123: a = (\n    )

Okay: a = (\n    42)
E121: a = (\n   42)
E122: a = (\n42)
E123: a = (\n    42\n    )
E124: a = (24,\n     42\n)
E125: if (\n    b):\n    pass
E126: a = (\n        42)
E127: a = (24,\n      42)
E128: a = (24,\n    42)
E129: if (a or\n    b):\n    pass
E131: a = (\n    42\n 24)

Line too long (97 > 79 characters)
Open

    def __init__(self, tool, source_node, splitting_node, sink_node, input_plate, output_plates):
Severity: Minor
Found in hyperstream/factor/factor.py by pep8

Limit all lines to a maximum of 79 characters.

There are still many devices around that are limited to 80 character
lines; plus, limiting windows to 80 characters makes it possible to
have several windows side-by-side.  The default wrapping on such
devices looks ugly.  Therefore, please limit all lines to a maximum
of 79 characters. For flowing long blocks of text (docstrings or
comments), limiting the length to 72 characters is recommended.

Reports error E501.

Line too long (87 > 79 characters)
Open

        :param output_plates: The plates, the last of which will be the new one created
Severity: Minor
Found in hyperstream/factor/factor.py by pep8

Limit all lines to a maximum of 79 characters.

There are still many devices around that are limited to 80 character
lines; plus, limiting windows to 80 characters makes it possible to
have several windows side-by-side.  The default wrapping on such
devices looks ugly.  Therefore, please limit all lines to a maximum
of 79 characters. For flowing long blocks of text (docstrings or
comments), limiting the length to 72 characters is recommended.

Reports error E501.

Line too long (105 > 79 characters)
Open

        Execute the factor over the given time interval. Note that this is normally done by the workflow,
Severity: Minor
Found in hyperstream/factor/factor.py by pep8

Limit all lines to a maximum of 79 characters.

There are still many devices around that are limited to 80 character
lines; plus, limiting windows to 80 characters makes it possible to
have several windows side-by-side.  The default wrapping on such
devices looks ugly.  Therefore, please limit all lines to a maximum
of 79 characters. For flowing long blocks of text (docstrings or
comments), limiting the length to 72 characters is recommended.

Reports error E501.

Line too long (96 > 79 characters)
Open

            raise ValueError("Splitting node cannot live on a plate if there is no input plate")
Severity: Minor
Found in hyperstream/factor/factor.py by pep8

Limit all lines to a maximum of 79 characters.

There are still many devices around that are limited to 80 character
lines; plus, limiting windows to 80 characters makes it possible to
have several windows side-by-side.  The default wrapping on such
devices looks ugly.  Therefore, please limit all lines to a maximum
of 79 characters. For flowing long blocks of text (docstrings or
comments), limiting the length to 72 characters is recommended.

Reports error E501.

Line too long (82 > 79 characters)
Open

                    raise ValueError("Expected node, got {}".format(type(source)))
Severity: Minor
Found in hyperstream/factor/factor.py by pep8

Limit all lines to a maximum of 79 characters.

There are still many devices around that are limited to 80 character
lines; plus, limiting windows to 80 characters makes it possible to
have several windows side-by-side.  The default wrapping on such
devices looks ugly.  Therefore, please limit all lines to a maximum
of 79 characters. For flowing long blocks of text (docstrings or
comments), limiting the length to 72 characters is recommended.

Reports error E501.

Blank line contains whitespace
Open
Severity: Minor
Found in hyperstream/factor/factor.py by pep8

Trailing whitespace is superfluous.

The warning returned varies on whether the line itself is blank,
for easier filtering for those who want to indent their blank lines.

Okay: spam(1)\n#
W291: spam(1) \n#
W293: class Foo(object):\n    \n    bang = 12

Line too long (85 > 79 characters)
Open

                        raise ValueError("Selector node should only have one stream")
Severity: Minor
Found in hyperstream/factor/factor.py by pep8

Limit all lines to a maximum of 79 characters.

There are still many devices around that are limited to 80 character
lines; plus, limiting windows to 80 characters makes it possible to
have several windows side-by-side.  The default wrapping on such
devices looks ugly.  Therefore, please limit all lines to a maximum
of 79 characters. For flowing long blocks of text (docstrings or
comments), limiting the length to 72 characters is recommended.

Reports error E501.

Line too long (97 > 79 characters)
Open

                                          alignment_stream=self.get_alignment_stream(None, None))
Severity: Minor
Found in hyperstream/factor/factor.py by pep8

Limit all lines to a maximum of 79 characters.

There are still many devices around that are limited to 80 character
lines; plus, limiting windows to 80 characters makes it possible to
have several windows side-by-side.  The default wrapping on such
devices looks ugly.  Therefore, please limit all lines to a maximum
of 79 characters. For flowing long blocks of text (docstrings or
comments), limiting the length to 72 characters is recommended.

Reports error E501.

Line too long (105 > 79 characters)
Open

                    raise ValueError("Currently an alignment node cannot be used with an Aggregate Tool")
Severity: Minor
Found in hyperstream/factor/factor.py by pep8

Limit all lines to a maximum of 79 characters.

There are still many devices around that are limited to 80 character
lines; plus, limiting windows to 80 characters makes it possible to
have several windows side-by-side.  The default wrapping on such
devices looks ugly.  Therefore, please limit all lines to a maximum
of 79 characters. For flowing long blocks of text (docstrings or
comments), limiting the length to 72 characters is recommended.

Reports error E501.

Line too long (103 > 79 characters)
Open

            raise NotImplementedError("Currently only alignment nodes outside of plates are supported")
Severity: Minor
Found in hyperstream/factor/factor.py by pep8

Limit all lines to a maximum of 79 characters.

There are still many devices around that are limited to 80 character
lines; plus, limiting windows to 80 characters makes it possible to
have several windows side-by-side.  The default wrapping on such
devices looks ugly.  Therefore, please limit all lines to a maximum
of 79 characters. For flowing long blocks of text (docstrings or
comments), limiting the length to 72 characters is recommended.

Reports error E501.

Line too long (89 > 79 characters)
Open

                    "Splitting node plate {} does not match input plate {} for factor {}"
Severity: Minor
Found in hyperstream/factor/factor.py by pep8

Limit all lines to a maximum of 79 characters.

There are still many devices around that are limited to 80 character
lines; plus, limiting windows to 80 characters makes it possible to
have several windows side-by-side.  The default wrapping on such
devices looks ugly.  Therefore, please limit all lines to a maximum
of 79 characters. For flowing long blocks of text (docstrings or
comments), limiting the length to 72 characters is recommended.

Reports error E501.

Line too long (105 > 79 characters)
Open

        Execute the factor over the given time interval. Note that this is normally done by the workflow,
Severity: Minor
Found in hyperstream/factor/factor.py by pep8

Limit all lines to a maximum of 79 characters.

There are still many devices around that are limited to 80 character
lines; plus, limiting windows to 80 characters makes it possible to
have several windows side-by-side.  The default wrapping on such
devices looks ugly.  Therefore, please limit all lines to a maximum
of 79 characters. For flowing long blocks of text (docstrings or
comments), limiting the length to 72 characters is recommended.

Reports error E501.

Blank line contains whitespace
Open
Severity: Minor
Found in hyperstream/factor/factor.py by pep8

Trailing whitespace is superfluous.

The warning returned varies on whether the line itself is blank,
for easier filtering for those who want to indent their blank lines.

Okay: spam(1)\n#
W291: spam(1) \n#
W293: class Foo(object):\n    \n    bang = 12

Blank line contains whitespace
Open
Severity: Minor
Found in hyperstream/factor/factor.py by pep8

Trailing whitespace is superfluous.

The warning returned varies on whether the line itself is blank,
for easier filtering for those who want to indent their blank lines.

Okay: spam(1)\n#
W291: spam(1) \n#
W293: class Foo(object):\n    \n    bang = 12

Line too long (94 > 79 characters)
Open

        Also populates with source streams that are valid for the parent plates of this plate,
Severity: Minor
Found in hyperstream/factor/factor.py by pep8

Limit all lines to a maximum of 79 characters.

There are still many devices around that are limited to 80 character
lines; plus, limiting windows to 80 characters makes it possible to
have several windows side-by-side.  The default wrapping on such
devices looks ugly.  Therefore, please limit all lines to a maximum
of 79 characters. For flowing long blocks of text (docstrings or
comments), limiting the length to 72 characters is recommended.

Reports error E501.

Blank line contains whitespace
Open
Severity: Minor
Found in hyperstream/factor/factor.py by pep8

Trailing whitespace is superfluous.

The warning returned varies on whether the line itself is blank,
for easier filtering for those who want to indent their blank lines.

Okay: spam(1)\n#
W291: spam(1) \n#
W293: class Foo(object):\n    \n    bang = 12

Blank line contains whitespace
Open
Severity: Minor
Found in hyperstream/factor/factor.py by pep8

Trailing whitespace is superfluous.

The warning returned varies on whether the line itself is blank,
for easier filtering for those who want to indent their blank lines.

Okay: spam(1)\n#
W291: spam(1) \n#
W293: class Foo(object):\n    \n    bang = 12

Line too long (82 > 79 characters)
Open

            self.tool.__class__.__name__, time_interval.start, time_interval.end))
Severity: Minor
Found in hyperstream/factor/factor.py by pep8

Limit all lines to a maximum of 79 characters.

There are still many devices around that are limited to 80 character
lines; plus, limiting windows to 80 characters makes it possible to
have several windows side-by-side.  The default wrapping on such
devices looks ugly.  Therefore, please limit all lines to a maximum
of 79 characters. For flowing long blocks of text (docstrings or
comments), limiting the length to 72 characters is recommended.

Reports error E501.

Line too long (84 > 79 characters)
Open

        input_plate_values = self.input_plate.values if self.input_plate else [None]
Severity: Minor
Found in hyperstream/factor/factor.py by pep8

Limit all lines to a maximum of 79 characters.

There are still many devices around that are limited to 80 character
lines; plus, limiting windows to 80 characters makes it possible to
have several windows side-by-side.  The default wrapping on such
devices looks ugly.  Therefore, please limit all lines to a maximum
of 79 characters. For flowing long blocks of text (docstrings or
comments), limiting the length to 72 characters is recommended.

Reports error E501.

Line too long (98 > 79 characters)
Open

                    raise ValueError("Should be a single output plate if there is no input plate")
Severity: Minor
Found in hyperstream/factor/factor.py by pep8

Limit all lines to a maximum of 79 characters.

There are still many devices around that are limited to 80 character
lines; plus, limiting windows to 80 characters makes it possible to
have several windows side-by-side.  The default wrapping on such
devices looks ugly.  Therefore, please limit all lines to a maximum
of 79 characters. For flowing long blocks of text (docstrings or
comments), limiting the length to 72 characters is recommended.

Reports error E501.

Trailing whitespace
Open

#
Severity: Minor
Found in hyperstream/factor/factor.py by pep8

Trailing whitespace is superfluous.

The warning returned varies on whether the line itself is blank,
for easier filtering for those who want to indent their blank lines.

Okay: spam(1)\n#
W291: spam(1) \n#
W293: class Foo(object):\n    \n    bang = 12

Blank line contains whitespace
Open
Severity: Minor
Found in hyperstream/factor/factor.py by pep8

Trailing whitespace is superfluous.

The warning returned varies on whether the line itself is blank,
for easier filtering for those who want to indent their blank lines.

Okay: spam(1)\n#
W291: spam(1) \n#
W293: class Foo(object):\n    \n    bang = 12

Line too long (83 > 79 characters)
Open

                diff, counts, is_sub_plate = self.sources[-1].difference(self.sink)
Severity: Minor
Found in hyperstream/factor/factor.py by pep8

Limit all lines to a maximum of 79 characters.

There are still many devices around that are limited to 80 character
lines; plus, limiting windows to 80 characters makes it possible to
have several windows side-by-side.  The default wrapping on such
devices looks ugly.  Therefore, please limit all lines to a maximum
of 79 characters. For flowing long blocks of text (docstrings or
comments), limiting the length to 72 characters is recommended.

Reports error E501.

Line too long (83 > 79 characters)
Open

                                           for s in source.streams if (s[0] in pv)]
Severity: Minor
Found in hyperstream/factor/factor.py by pep8

Limit all lines to a maximum of 79 characters.

There are still many devices around that are limited to 80 character
lines; plus, limiting windows to 80 characters makes it possible to
have several windows side-by-side.  The default wrapping on such
devices looks ugly.  Therefore, please limit all lines to a maximum
of 79 characters. For flowing long blocks of text (docstrings or
comments), limiting the length to 72 characters is recommended.

Reports error E501.

Line too long (108 > 79 characters)
Open

                self.tool.execute(sources=sources, sink=sink, interval=time_interval, alignment_stream=None)
Severity: Minor
Found in hyperstream/factor/factor.py by pep8

Limit all lines to a maximum of 79 characters.

There are still many devices around that are limited to 80 character
lines; plus, limiting windows to 80 characters makes it possible to
have several windows side-by-side.  The default wrapping on such
devices looks ugly.  Therefore, please limit all lines to a maximum
of 79 characters. For flowing long blocks of text (docstrings or
comments), limiting the length to 72 characters is recommended.

Reports error E501.

Line too long (117 > 79 characters)
Open

    As with a factor, this links source nodes to sink nodes. However in this case the source node is being split onto
Severity: Minor
Found in hyperstream/factor/factor.py by pep8

Limit all lines to a maximum of 79 characters.

There are still many devices around that are limited to 80 character
lines; plus, limiting windows to 80 characters makes it possible to
have several windows side-by-side.  The default wrapping on such
devices looks ugly.  Therefore, please limit all lines to a maximum
of 79 characters. For flowing long blocks of text (docstrings or
comments), limiting the length to 72 characters is recommended.

Reports error E501.

Blank line contains whitespace
Open
Severity: Minor
Found in hyperstream/factor/factor.py by pep8

Trailing whitespace is superfluous.

The warning returned varies on whether the line itself is blank,
for easier filtering for those who want to indent their blank lines.

Okay: spam(1)\n#
W291: spam(1) \n#
W293: class Foo(object):\n    \n    bang = 12

Line too long (86 > 79 characters)
Open

                raise RuntimeError('Tool execution did not cover the time interval {}'
Severity: Minor
Found in hyperstream/factor/factor.py by pep8

Limit all lines to a maximum of 79 characters.

There are still many devices around that are limited to 80 character
lines; plus, limiting windows to 80 characters makes it possible to
have several windows side-by-side.  The default wrapping on such
devices looks ugly.  Therefore, please limit all lines to a maximum
of 79 characters. For flowing long blocks of text (docstrings or
comments), limiting the length to 72 characters is recommended.

Reports error E501.

Line too long (92 > 79 characters)
Open

                parent_plate = self._plate_manager.plates[self.output_plate["parent_plate"]]
Severity: Minor
Found in hyperstream/factor/factor.py by pep8

Limit all lines to a maximum of 79 characters.

There are still many devices around that are limited to 80 character
lines; plus, limiting windows to 80 characters makes it possible to
have several windows side-by-side.  The default wrapping on such
devices looks ugly.  Therefore, please limit all lines to a maximum
of 79 characters. For flowing long blocks of text (docstrings or
comments), limiting the length to 72 characters is recommended.

Reports error E501.

Line too long (90 > 79 characters)
Open

            logging.info("Plate with ID {} created".format(self.output_plate["plate_id"]))
Severity: Minor
Found in hyperstream/factor/factor.py by pep8

Limit all lines to a maximum of 79 characters.

There are still many devices around that are limited to 80 character
lines; plus, limiting windows to 80 characters makes it possible to
have several windows side-by-side.  The default wrapping on such
devices looks ugly.  Therefore, please limit all lines to a maximum
of 79 characters. For flowing long blocks of text (docstrings or
comments), limiting the length to 72 characters is recommended.

Reports error E501.

Blank line contains whitespace
Open
Severity: Minor
Found in hyperstream/factor/factor.py by pep8

Trailing whitespace is superfluous.

The warning returned varies on whether the line itself is blank,
for easier filtering for those who want to indent their blank lines.

Okay: spam(1)\n#
W291: spam(1) \n#
W293: class Foo(object):\n    \n    bang = 12

Over-indented
Open

                        self.tool.execute(sources=sources,
Severity: Minor
Found in hyperstream/factor/factor.py by pep8

Use indent_size (PEP8 says 4) spaces per indentation level.

For really old code that you don't want to mess up, you can continue
to use 8-space tabs.

Okay: a = 1
Okay: if a == 0:\n    a = 1
E111:   a = 1
E114:   # a = 1

Okay: for item in items:\n    pass
E112: for item in items:\npass
E115: for item in items:\n# Hi\n    pass

Okay: a = 1\nb = 2
E113: a = 1\n    b = 2
E116: a = 1\n    # b = 2

Line too long (98 > 79 characters)
Open

                    raise ValueError("Source and sink plates do not match within a Selector Tool")
Severity: Minor
Found in hyperstream/factor/factor.py by pep8

Limit all lines to a maximum of 79 characters.

There are still many devices around that are limited to 80 character
lines; plus, limiting windows to 80 characters makes it possible to
have several windows side-by-side.  The default wrapping on such
devices looks ugly.  Therefore, please limit all lines to a maximum
of 79 characters. For flowing long blocks of text (docstrings or
comments), limiting the length to 72 characters is recommended.

Reports error E501.

Line too long (87 > 79 characters)
Open

                                sources = [source.streams[s] for source in self.sources
Severity: Minor
Found in hyperstream/factor/factor.py by pep8

Limit all lines to a maximum of 79 characters.

There are still many devices around that are limited to 80 character
lines; plus, limiting windows to 80 characters makes it possible to
have several windows side-by-side.  The default wrapping on such
devices looks ugly.  Therefore, please limit all lines to a maximum
of 79 characters. For flowing long blocks of text (docstrings or
comments), limiting the length to 72 characters is recommended.

Reports error E501.

Line too long (103 > 79 characters)
Open

                # sources = [source.streams[None] for source in self.sources] if self.sources else None
Severity: Minor
Found in hyperstream/factor/factor.py by pep8

Limit all lines to a maximum of 79 characters.

There are still many devices around that are limited to 80 character
lines; plus, limiting windows to 80 characters makes it possible to
have several windows side-by-side.  The default wrapping on such
devices looks ugly.  Therefore, please limit all lines to a maximum
of 79 characters. For flowing long blocks of text (docstrings or
comments), limiting the length to 72 characters is recommended.

Reports error E501.

Blank line contains whitespace
Open
Severity: Minor
Found in hyperstream/factor/factor.py by pep8

Trailing whitespace is superfluous.

The warning returned varies on whether the line itself is blank,
for easier filtering for those who want to indent their blank lines.

Okay: spam(1)\n#
W291: spam(1) \n#
W293: class Foo(object):\n    \n    bang = 12

Line too long (110 > 79 characters)
Open

                ppv = filter(lambda x: all(p in input_plate_value for p in x), self.input_plate.parent.values)
Severity: Minor
Found in hyperstream/factor/factor.py by pep8

Limit all lines to a maximum of 79 characters.

There are still many devices around that are limited to 80 character
lines; plus, limiting windows to 80 characters makes it possible to
have several windows side-by-side.  The default wrapping on such
devices looks ugly.  Therefore, please limit all lines to a maximum
of 79 characters. For flowing long blocks of text (docstrings or
comments), limiting the length to 72 characters is recommended.

Reports error E501.

Line too long (117 > 79 characters)
Open

            raise NotImplementedError("Currently only support using empty set and complement=True for the new plate")
Severity: Minor
Found in hyperstream/factor/factor.py by pep8

Limit all lines to a maximum of 79 characters.

There are still many devices around that are limited to 80 character
lines; plus, limiting windows to 80 characters makes it possible to
have several windows side-by-side.  The default wrapping on such
devices looks ugly.  Therefore, please limit all lines to a maximum
of 79 characters. For flowing long blocks of text (docstrings or
comments), limiting the length to 72 characters is recommended.

Reports error E501.

Line too long (92 > 79 characters)
Open

from ..tool import BaseTool, MultiOutputTool, AggregateTool, SelectorTool, PlateCreationTool
Severity: Minor
Found in hyperstream/factor/factor.py by pep8

Limit all lines to a maximum of 79 characters.

There are still many devices around that are limited to 80 character
lines; plus, limiting windows to 80 characters makes it possible to
have several windows side-by-side.  The default wrapping on such
devices looks ugly.  Therefore, please limit all lines to a maximum
of 79 characters. For flowing long blocks of text (docstrings or
comments), limiting the length to 72 characters is recommended.

Reports error E501.

Line too long (87 > 79 characters)
Open

            raise IncompatibleToolError("Use NodeCreationFactor for PlateCreationTool")
Severity: Minor
Found in hyperstream/factor/factor.py by pep8

Limit all lines to a maximum of 79 characters.

There are still many devices around that are limited to 80 character
lines; plus, limiting windows to 80 characters makes it possible to
have several windows side-by-side.  The default wrapping on such
devices looks ugly.  Therefore, please limit all lines to a maximum
of 79 characters. For flowing long blocks of text (docstrings or
comments), limiting the length to 72 characters is recommended.

Reports error E501.

Line too long (95 > 79 characters)
Open

                    sources = [self.sources[0].streams[None], self.sources[1].streams.values()]
Severity: Minor
Found in hyperstream/factor/factor.py by pep8

Limit all lines to a maximum of 79 characters.

There are still many devices around that are limited to 80 character
lines; plus, limiting windows to 80 characters makes it possible to
have several windows side-by-side.  The default wrapping on such
devices looks ugly.  Therefore, please limit all lines to a maximum
of 79 characters. For flowing long blocks of text (docstrings or
comments), limiting the length to 72 characters is recommended.

Reports error E501.

Line too long (89 > 79 characters)
Open

                    (len(self.sink.plates)==1 and counts == [1, 0] and is_sub_plate) or \
Severity: Minor
Found in hyperstream/factor/factor.py by pep8

Limit all lines to a maximum of 79 characters.

There are still many devices around that are limited to 80 character
lines; plus, limiting windows to 80 characters makes it possible to
have several windows side-by-side.  The default wrapping on such
devices looks ugly.  Therefore, please limit all lines to a maximum
of 79 characters. For flowing long blocks of text (docstrings or
comments), limiting the length to 72 characters is recommended.

Reports error E501.

Over-indented (comment)
Open

                        # Special case of tools that are performing sub-selection
Severity: Minor
Found in hyperstream/factor/factor.py by pep8

Use indent_size (PEP8 says 4) spaces per indentation level.

For really old code that you don't want to mess up, you can continue
to use 8-space tabs.

Okay: a = 1
Okay: if a == 0:\n    a = 1
E111:   a = 1
E114:   # a = 1

Okay: for item in items:\n    pass
E112: for item in items:\npass
E115: for item in items:\n# Hi\n    pass

Okay: a = 1\nb = 2
E113: a = 1\n    b = 2
E116: a = 1\n    # b = 2

Blank line contains whitespace
Open
Severity: Minor
Found in hyperstream/factor/factor.py by pep8

Trailing whitespace is superfluous.

The warning returned varies on whether the line itself is blank,
for easier filtering for those who want to indent their blank lines.

Okay: spam(1)\n#
W291: spam(1) \n#
W293: class Foo(object):\n    \n    bang = 12

Line too long (81 > 79 characters)
Open

                    source=source, interval=time_interval, input_plate_value=ipv)
Severity: Minor
Found in hyperstream/factor/factor.py by pep8

Limit all lines to a maximum of 79 characters.

There are still many devices around that are limited to 80 character
lines; plus, limiting windows to 80 characters makes it possible to
have several windows side-by-side.  The default wrapping on such
devices looks ugly.  Therefore, please limit all lines to a maximum
of 79 characters. For flowing long blocks of text (docstrings or
comments), limiting the length to 72 characters is recommended.

Reports error E501.

Line too long (105 > 79 characters)
Open

                    raise ValueError("Currently an alignment node cannot be used with an Aggregate Tool")
Severity: Minor
Found in hyperstream/factor/factor.py by pep8

Limit all lines to a maximum of 79 characters.

There are still many devices around that are limited to 80 character
lines; plus, limiting windows to 80 characters makes it possible to
have several windows side-by-side.  The default wrapping on such
devices looks ugly.  Therefore, please limit all lines to a maximum
of 79 characters. For flowing long blocks of text (docstrings or
comments), limiting the length to 72 characters is recommended.

Reports error E501.

Line too long (110 > 79 characters)
Open

                ppv = filter(lambda x: all(p in input_plate_value for p in x), self.input_plate.parent.values)
Severity: Minor
Found in hyperstream/factor/factor.py by pep8

Limit all lines to a maximum of 79 characters.

There are still many devices around that are limited to 80 character
lines; plus, limiting windows to 80 characters makes it possible to
have several windows side-by-side.  The default wrapping on such
devices looks ugly.  Therefore, please limit all lines to a maximum
of 79 characters. For flowing long blocks of text (docstrings or
comments), limiting the length to 72 characters is recommended.

Reports error E501.

Line too long (80 > 79 characters)
Open

# The above copyright notice and this permission notice shall be included in all
Severity: Minor
Found in hyperstream/factor/factor.py by pep8

Limit all lines to a maximum of 79 characters.

There are still many devices around that are limited to 80 character
lines; plus, limiting windows to 80 characters makes it possible to
have several windows side-by-side.  The default wrapping on such
devices looks ugly.  Therefore, please limit all lines to a maximum
of 79 characters. For flowing long blocks of text (docstrings or
comments), limiting the length to 72 characters is recommended.

Reports error E501.

Line too long (106 > 79 characters)
Open

                    raise ValueError("Currently only a single source node is valid for an Aggregate Tool")
Severity: Minor
Found in hyperstream/factor/factor.py by pep8

Limit all lines to a maximum of 79 characters.

There are still many devices around that are limited to 80 character
lines; plus, limiting windows to 80 characters makes it possible to
have several windows side-by-side.  The default wrapping on such
devices looks ugly.  Therefore, please limit all lines to a maximum
of 79 characters. For flowing long blocks of text (docstrings or
comments), limiting the length to 72 characters is recommended.

Reports error E501.

Line too long (112 > 79 characters)
Open

                    sources = [all_sources.streams[s] for s in all_sources.streams if all([v in s for v in pv])]
Severity: Minor
Found in hyperstream/factor/factor.py by pep8

Limit all lines to a maximum of 79 characters.

There are still many devices around that are limited to 80 character
lines; plus, limiting windows to 80 characters makes it possible to
have several windows side-by-side.  The default wrapping on such
devices looks ugly.  Therefore, please limit all lines to a maximum
of 79 characters. For flowing long blocks of text (docstrings or
comments), limiting the length to 72 characters is recommended.

Reports error E501.

Line too long (105 > 79 characters)
Open

                    if len(self.sources) != 1 and not all(s.plates == self.plates for s in self.sources):
Severity: Minor
Found in hyperstream/factor/factor.py by pep8

Limit all lines to a maximum of 79 characters.

There are still many devices around that are limited to 80 character
lines; plus, limiting windows to 80 characters makes it possible to
have several windows side-by-side.  The default wrapping on such
devices looks ugly.  Therefore, please limit all lines to a maximum
of 79 characters. For flowing long blocks of text (docstrings or
comments), limiting the length to 72 characters is recommended.

Reports error E501.

Line too long (105 > 79 characters)
Open

                                    self.tool.execute(sources=sources, sink=sink, interval=time_interval,
Severity: Minor
Found in hyperstream/factor/factor.py by pep8

Limit all lines to a maximum of 79 characters.

There are still many devices around that are limited to 80 character
lines; plus, limiting windows to 80 characters makes it possible to
have several windows side-by-side.  The default wrapping on such
devices looks ugly.  Therefore, please limit all lines to a maximum
of 79 characters. For flowing long blocks of text (docstrings or
comments), limiting the length to 72 characters is recommended.

Reports error E501.

Line too long (109 > 79 characters)
Open

                # raise ValueError("Cannot execute an AggregateTool if no plates are defined for the factor")
Severity: Minor
Found in hyperstream/factor/factor.py by pep8

Limit all lines to a maximum of 79 characters.

There are still many devices around that are limited to 80 character
lines; plus, limiting windows to 80 characters makes it possible to
have several windows side-by-side.  The default wrapping on such
devices looks ugly.  Therefore, please limit all lines to a maximum
of 79 characters. For flowing long blocks of text (docstrings or
comments), limiting the length to 72 characters is recommended.

Reports error E501.

Line too long (118 > 79 characters)
Open

                # Here we're trying to aggregate off a plate. This is only allowed for a single non-overlapping plate.
Severity: Minor
Found in hyperstream/factor/factor.py by pep8

Limit all lines to a maximum of 79 characters.

There are still many devices around that are limited to 80 character
lines; plus, limiting windows to 80 characters makes it possible to
have several windows side-by-side.  The default wrapping on such
devices looks ugly.  Therefore, please limit all lines to a maximum
of 79 characters. For flowing long blocks of text (docstrings or
comments), limiting the length to 72 characters is recommended.

Reports error E501.

Line too long (82 > 79 characters)
Open

            raise ValueError("Expected node, got {}".format(type(splitting_node)))
Severity: Minor
Found in hyperstream/factor/factor.py by pep8

Limit all lines to a maximum of 79 characters.

There are still many devices around that are limited to 80 character
lines; plus, limiting windows to 80 characters makes it possible to
have several windows side-by-side.  The default wrapping on such
devices looks ugly.  Therefore, please limit all lines to a maximum
of 79 characters. For flowing long blocks of text (docstrings or
comments), limiting the length to 72 characters is recommended.

Reports error E501.

Blank line contains whitespace
Open
Severity: Minor
Found in hyperstream/factor/factor.py by pep8

Trailing whitespace is superfluous.

The warning returned varies on whether the line itself is blank,
for easier filtering for those who want to indent their blank lines.

Okay: spam(1)\n#
W291: spam(1) \n#
W293: class Foo(object):\n    \n    bang = 12

Line too long (90 > 79 characters)
Open

                    if self.output_plates[0].parent.plate_id != self.input_plate.plate_id:
Severity: Minor
Found in hyperstream/factor/factor.py by pep8

Limit all lines to a maximum of 79 characters.

There are still many devices around that are limited to 80 character
lines; plus, limiting windows to 80 characters makes it possible to
have several windows side-by-side.  The default wrapping on such
devices looks ugly.  Therefore, please limit all lines to a maximum
of 79 characters. For flowing long blocks of text (docstrings or
comments), limiting the length to 72 characters is recommended.

Reports error E501.

Line too long (119 > 79 characters)
Open

                # that given plate value, and pass only those sources to the tool. This is cleaner than making the tool
Severity: Minor
Found in hyperstream/factor/factor.py by pep8

Limit all lines to a maximum of 79 characters.

There are still many devices around that are limited to 80 character
lines; plus, limiting windows to 80 characters makes it possible to
have several windows side-by-side.  The default wrapping on such
devices looks ugly.  Therefore, please limit all lines to a maximum
of 79 characters. For flowing long blocks of text (docstrings or
comments), limiting the length to 72 characters is recommended.

Reports error E501.

Line too long (109 > 79 characters)
Open

                    raise ValueError("Currently only one or twos source nodes are valid for a Selector Tool")
Severity: Minor
Found in hyperstream/factor/factor.py by pep8

Limit all lines to a maximum of 79 characters.

There are still many devices around that are limited to 80 character
lines; plus, limiting windows to 80 characters makes it possible to
have several windows side-by-side.  The default wrapping on such
devices looks ugly.  Therefore, please limit all lines to a maximum
of 79 characters. For flowing long blocks of text (docstrings or
comments), limiting the length to 72 characters is recommended.

Reports error E501.

Line too long (93 > 79 characters)
Open

                        self.tool.execute(sources=sources, sink=sink, interval=time_interval,
Severity: Minor
Found in hyperstream/factor/factor.py by pep8

Limit all lines to a maximum of 79 characters.

There are still many devices around that are limited to 80 character
lines; plus, limiting windows to 80 characters makes it possible to
have several windows side-by-side.  The default wrapping on such
devices looks ugly.  Therefore, please limit all lines to a maximum
of 79 characters. For flowing long blocks of text (docstrings or
comments), limiting the length to 72 characters is recommended.

Reports error E501.

Line too long (109 > 79 characters)
Open

                    # # TODO - determine whether this should raise an exception or not, or even log a warning
Severity: Minor
Found in hyperstream/factor/factor.py by pep8

Limit all lines to a maximum of 79 characters.

There are still many devices around that are limited to 80 character
lines; plus, limiting windows to 80 characters makes it possible to
have several windows side-by-side.  The default wrapping on such
devices looks ugly.  Therefore, please limit all lines to a maximum
of 79 characters. For flowing long blocks of text (docstrings or
comments), limiting the length to 72 characters is recommended.

Reports error E501.

Line too long (81 > 79 characters)
Open

            sources = self.get_sources(plate.parent, parent_plate_value, sources)
Severity: Minor
Found in hyperstream/factor/factor.py by pep8

Limit all lines to a maximum of 79 characters.

There are still many devices around that are limited to 80 character
lines; plus, limiting windows to 80 characters makes it possible to
have several windows side-by-side.  The default wrapping on such
devices looks ugly.  Therefore, please limit all lines to a maximum
of 79 characters. For flowing long blocks of text (docstrings or
comments), limiting the length to 72 characters is recommended.

Reports error E501.

Line too long (93 > 79 characters)
Open

                    .format(self.input_plate, self.splitting_node.plates[0], self.factor_id))
Severity: Minor
Found in hyperstream/factor/factor.py by pep8

Limit all lines to a maximum of 79 characters.

There are still many devices around that are limited to 80 character
lines; plus, limiting windows to 80 characters makes it possible to
have several windows side-by-side.  The default wrapping on such
devices looks ugly.  Therefore, please limit all lines to a maximum
of 79 characters. For flowing long blocks of text (docstrings or
comments), limiting the length to 72 characters is recommended.

Reports error E501.

Line too long (91 > 79 characters)
Open

            required_intervals = TimeIntervals([time_interval]) - sink.calculated_intervals
Severity: Minor
Found in hyperstream/factor/factor.py by pep8

Limit all lines to a maximum of 79 characters.

There are still many devices around that are limited to 80 character
lines; plus, limiting windows to 80 characters makes it possible to
have several windows side-by-side.  The default wrapping on such
devices looks ugly.  Therefore, please limit all lines to a maximum
of 79 characters. For flowing long blocks of text (docstrings or
comments), limiting the length to 72 characters is recommended.

Reports error E501.

Blank line contains whitespace
Open
Severity: Minor
Found in hyperstream/factor/factor.py by pep8

Trailing whitespace is superfluous.

The warning returned varies on whether the line itself is blank,
for easier filtering for those who want to indent their blank lines.

Okay: spam(1)\n#
W291: spam(1) \n#
W293: class Foo(object):\n    \n    bang = 12

Blank line contains whitespace
Open
Severity: Minor
Found in hyperstream/factor/factor.py by pep8

Trailing whitespace is superfluous.

The warning returned varies on whether the line itself is blank,
for easier filtering for those who want to indent their blank lines.

Okay: spam(1)\n#
W291: spam(1) \n#
W293: class Foo(object):\n    \n    bang = 12

Line too long (106 > 79 characters)
Open

                    raise ValueError("Currently only a single source node is valid for an Aggregate Tool")
Severity: Minor
Found in hyperstream/factor/factor.py by pep8

Limit all lines to a maximum of 79 characters.

There are still many devices around that are limited to 80 character
lines; plus, limiting windows to 80 characters makes it possible to
have several windows side-by-side.  The default wrapping on such
devices looks ugly.  Therefore, please limit all lines to a maximum
of 79 characters. For flowing long blocks of text (docstrings or
comments), limiting the length to 72 characters is recommended.

Reports error E501.

Line too long (85 > 79 characters)
Open

                self.tool.execute(sources=sources, sink=sink, interval=time_interval,
Severity: Minor
Found in hyperstream/factor/factor.py by pep8

Limit all lines to a maximum of 79 characters.

There are still many devices around that are limited to 80 character
lines; plus, limiting windows to 80 characters makes it possible to
have several windows side-by-side.  The default wrapping on such
devices looks ugly.  Therefore, please limit all lines to a maximum
of 79 characters. For flowing long blocks of text (docstrings or
comments), limiting the length to 72 characters is recommended.

Reports error E501.

Trailing whitespace
Open

#
Severity: Minor
Found in hyperstream/factor/factor.py by pep8

Trailing whitespace is superfluous.

The warning returned varies on whether the line itself is blank,
for easier filtering for those who want to indent their blank lines.

Okay: spam(1)\n#
W291: spam(1) \n#
W293: class Foo(object):\n    \n    bang = 12

Line too long (103 > 79 characters)
Open

            raise NotImplementedError("Currently only alignment nodes outside of plates are supported")
Severity: Minor
Found in hyperstream/factor/factor.py by pep8

Limit all lines to a maximum of 79 characters.

There are still many devices around that are limited to 80 character
lines; plus, limiting windows to 80 characters makes it possible to
have several windows side-by-side.  The default wrapping on such
devices looks ugly.  Therefore, please limit all lines to a maximum
of 79 characters. For flowing long blocks of text (docstrings or
comments), limiting the length to 72 characters is recommended.

Reports error E501.

Line too long (103 > 79 characters)
Open

            raise NotImplementedError("Currently only alignment nodes outside of plates are supported")
Severity: Minor
Found in hyperstream/factor/factor.py by pep8

Limit all lines to a maximum of 79 characters.

There are still many devices around that are limited to 80 character
lines; plus, limiting windows to 80 characters makes it possible to
have several windows side-by-side.  The default wrapping on such
devices looks ugly.  Therefore, please limit all lines to a maximum
of 79 characters. For flowing long blocks of text (docstrings or
comments), limiting the length to 72 characters is recommended.

Reports error E501.

Line too long (120 > 79 characters)
Open

                # Here we should loop through the plate values of the sink, and get the sources that are appropriate for
Severity: Minor
Found in hyperstream/factor/factor.py by pep8

Limit all lines to a maximum of 79 characters.

There are still many devices around that are limited to 80 character
lines; plus, limiting windows to 80 characters makes it possible to
have several windows side-by-side.  The default wrapping on such
devices looks ugly.  Therefore, please limit all lines to a maximum
of 79 characters. For flowing long blocks of text (docstrings or
comments), limiting the length to 72 characters is recommended.

Reports error E501.

Line too long (112 > 79 characters)
Open

                    self.tool.execute(sources=sources, sink=sink, interval=time_interval, alignment_stream=None)
Severity: Minor
Found in hyperstream/factor/factor.py by pep8

Limit all lines to a maximum of 79 characters.

There are still many devices around that are limited to 80 character
lines; plus, limiting windows to 80 characters makes it possible to
have several windows side-by-side.  The default wrapping on such
devices looks ugly.  Therefore, please limit all lines to a maximum
of 79 characters. For flowing long blocks of text (docstrings or
comments), limiting the length to 72 characters is recommended.

Reports error E501.

Line too long (103 > 79 characters)
Open

                    raise ValueError("Currently an alignment node cannot be used with a Selector Tool")
Severity: Minor
Found in hyperstream/factor/factor.py by pep8

Limit all lines to a maximum of 79 characters.

There are still many devices around that are limited to 80 character
lines; plus, limiting windows to 80 characters makes it possible to
have several windows side-by-side.  The default wrapping on such
devices looks ugly.  Therefore, please limit all lines to a maximum
of 79 characters. For flowing long blocks of text (docstrings or
comments), limiting the length to 72 characters is recommended.

Reports error E501.

Line too long (88 > 79 characters)
Open

                # What we probably want is to take the cartesian product of plate values
Severity: Minor
Found in hyperstream/factor/factor.py by pep8

Limit all lines to a maximum of 79 characters.

There are still many devices around that are limited to 80 character
lines; plus, limiting windows to 80 characters makes it possible to
have several windows side-by-side.  The default wrapping on such
devices looks ugly.  Therefore, please limit all lines to a maximum
of 79 characters. For flowing long blocks of text (docstrings or
comments), limiting the length to 72 characters is recommended.

Reports error E501.

Line too long (105 > 79 characters)
Open

                                                  alignment_stream=self.get_alignment_stream(None, None))
Severity: Minor
Found in hyperstream/factor/factor.py by pep8

Limit all lines to a maximum of 79 characters.

There are still many devices around that are limited to 80 character
lines; plus, limiting windows to 80 characters makes it possible to
have several windows side-by-side.  The default wrapping on such
devices looks ugly.  Therefore, please limit all lines to a maximum
of 79 characters. For flowing long blocks of text (docstrings or
comments), limiting the length to 72 characters is recommended.

Reports error E501.

Blank line contains whitespace
Open
Severity: Minor
Found in hyperstream/factor/factor.py by pep8

Trailing whitespace is superfluous.

The warning returned varies on whether the line itself is blank,
for easier filtering for those who want to indent their blank lines.

Okay: spam(1)\n#
W291: spam(1) \n#
W293: class Foo(object):\n    \n    bang = 12

Line too long (90 > 79 characters)
Open

            raise ValueError("Splitting node cannot live on multiple plates for factor {}"
Severity: Minor
Found in hyperstream/factor/factor.py by pep8

Limit all lines to a maximum of 79 characters.

There are still many devices around that are limited to 80 character
lines; plus, limiting windows to 80 characters makes it possible to
have several windows side-by-side.  The default wrapping on such
devices looks ugly.  Therefore, please limit all lines to a maximum
of 79 characters. For flowing long blocks of text (docstrings or
comments), limiting the length to 72 characters is recommended.

Reports error E501.

Line too long (80 > 79 characters)
Open

            raise ValueError("Expected plate, got {}".format(type(source_node)))
Severity: Minor
Found in hyperstream/factor/factor.py by pep8

Limit all lines to a maximum of 79 characters.

There are still many devices around that are limited to 80 character
lines; plus, limiting windows to 80 characters makes it possible to
have several windows side-by-side.  The default wrapping on such
devices looks ugly.  Therefore, please limit all lines to a maximum
of 79 characters. For flowing long blocks of text (docstrings or
comments), limiting the length to 72 characters is recommended.

Reports error E501.

Blank line contains whitespace
Open
Severity: Minor
Found in hyperstream/factor/factor.py by pep8

Trailing whitespace is superfluous.

The warning returned varies on whether the line itself is blank,
for easier filtering for those who want to indent their blank lines.

Okay: spam(1)\n#
W291: spam(1) \n#
W293: class Foo(object):\n    \n    bang = 12

Blank line contains whitespace
Open
Severity: Minor
Found in hyperstream/factor/factor.py by pep8

Trailing whitespace is superfluous.

The warning returned varies on whether the line itself is blank,
for easier filtering for those who want to indent their blank lines.

Okay: spam(1)\n#
W291: spam(1) \n#
W293: class Foo(object):\n    \n    bang = 12

Line too long (81 > 79 characters)
Open

        :param output_plate: The details of the plate that will be created (dict)
Severity: Minor
Found in hyperstream/factor/factor.py by pep8

Limit all lines to a maximum of 79 characters.

There are still many devices around that are limited to 80 character
lines; plus, limiting windows to 80 characters makes it possible to
have several windows side-by-side.  The default wrapping on such
devices looks ugly.  Therefore, please limit all lines to a maximum
of 79 characters. For flowing long blocks of text (docstrings or
comments), limiting the length to 72 characters is recommended.

Reports error E501.

Line too long (82 > 79 characters)
Open

                    source=source, interval=time_interval, input_plate_value=None)
Severity: Minor
Found in hyperstream/factor/factor.py by pep8

Limit all lines to a maximum of 79 characters.

There are still many devices around that are limited to 80 character
lines; plus, limiting windows to 80 characters makes it possible to
have several windows side-by-side.  The default wrapping on such
devices looks ugly.  Therefore, please limit all lines to a maximum
of 79 characters. For flowing long blocks of text (docstrings or
comments), limiting the length to 72 characters is recommended.

Reports error E501.

Line too long (114 > 79 characters)
Open

    A factor in the graph. This defines the element of computation: the tool along with the source and sink nodes.
Severity: Minor
Found in hyperstream/factor/factor.py by pep8

Limit all lines to a maximum of 79 characters.

There are still many devices around that are limited to 80 character
lines; plus, limiting windows to 80 characters makes it possible to
have several windows side-by-side.  The default wrapping on such
devices looks ugly.  Therefore, please limit all lines to a maximum
of 79 characters. For flowing long blocks of text (docstrings or
comments), limiting the length to 72 characters is recommended.

Reports error E501.

Line too long (113 > 79 characters)
Open

                                # Here we're selecting the streams that have the partial match of the plate value
Severity: Minor
Found in hyperstream/factor/factor.py by pep8

Limit all lines to a maximum of 79 characters.

There are still many devices around that are limited to 80 character
lines; plus, limiting windows to 80 characters makes it possible to
have several windows side-by-side.  The default wrapping on such
devices looks ugly.  Therefore, please limit all lines to a maximum
of 79 characters. For flowing long blocks of text (docstrings or
comments), limiting the length to 72 characters is recommended.

Reports error E501.

Blank line contains whitespace
Open
Severity: Minor
Found in hyperstream/factor/factor.py by pep8

Trailing whitespace is superfluous.

The warning returned varies on whether the line itself is blank,
for easier filtering for those who want to indent their blank lines.

Okay: spam(1)\n#
W291: spam(1) \n#
W293: class Foo(object):\n    \n    bang = 12

Line too long (90 > 79 characters)
Open

                # Select only the valid output plate values based on the input plate value
Severity: Minor
Found in hyperstream/factor/factor.py by pep8

Limit all lines to a maximum of 79 characters.

There are still many devices around that are limited to 80 character
lines; plus, limiting windows to 80 characters makes it possible to
have several windows side-by-side.  The default wrapping on such
devices looks ugly.  Therefore, please limit all lines to a maximum
of 79 characters. For flowing long blocks of text (docstrings or
comments), limiting the length to 72 characters is recommended.

Reports error E501.

Line too long (96 > 79 characters)
Open

                # TODO: This needs checking - is the logic still the same as for the case above?
Severity: Minor
Found in hyperstream/factor/factor.py by pep8

Limit all lines to a maximum of 79 characters.

There are still many devices around that are limited to 80 character
lines; plus, limiting windows to 80 characters makes it possible to
have several windows side-by-side.  The default wrapping on such
devices looks ugly.  Therefore, please limit all lines to a maximum
of 79 characters. For flowing long blocks of text (docstrings or
comments), limiting the length to 72 characters is recommended.

Reports error E501.

Line too long (101 > 79 characters)
Open

            self.tool.__class__.__name__, self.sink.node_id, time_interval.start, time_interval.end))
Severity: Minor
Found in hyperstream/factor/factor.py by pep8

Limit all lines to a maximum of 79 characters.

There are still many devices around that are limited to 80 character
lines; plus, limiting windows to 80 characters makes it possible to
have several windows side-by-side.  The default wrapping on such
devices looks ugly.  Therefore, please limit all lines to a maximum
of 79 characters. For flowing long blocks of text (docstrings or
comments), limiting the length to 72 characters is recommended.

Reports error E501.

Blank line contains whitespace
Open
Severity: Minor
Found in hyperstream/factor/factor.py by pep8

Trailing whitespace is superfluous.

The warning returned varies on whether the line itself is blank,
for easier filtering for those who want to indent their blank lines.

Okay: spam(1)\n#
W291: spam(1) \n#
W293: class Foo(object):\n    \n    bang = 12

Line too long (115 > 79 characters)
Open

                        sources = [source.streams[s] for source in self.sources for s in source.streams if pv == s]
Severity: Minor
Found in hyperstream/factor/factor.py by pep8

Limit all lines to a maximum of 79 characters.

There are still many devices around that are limited to 80 character
lines; plus, limiting windows to 80 characters makes it possible to
have several windows side-by-side.  The default wrapping on such
devices looks ugly.  Therefore, please limit all lines to a maximum
of 79 characters. For flowing long blocks of text (docstrings or
comments), limiting the length to 72 characters is recommended.

Reports error E501.

Line too long (95 > 79 characters)
Open

            parent_plate_value = tuple(pv for pv in plate_value if pv[0] != plate.meta_data_id)
Severity: Minor
Found in hyperstream/factor/factor.py by pep8

Limit all lines to a maximum of 79 characters.

There are still many devices around that are limited to 80 character
lines; plus, limiting windows to 80 characters makes it possible to
have several windows side-by-side.  The default wrapping on such
devices looks ugly.  Therefore, please limit all lines to a maximum
of 79 characters. For flowing long blocks of text (docstrings or
comments), limiting the length to 72 characters is recommended.

Reports error E501.

Blank line contains whitespace
Open
Severity: Minor
Found in hyperstream/factor/factor.py by pep8

Trailing whitespace is superfluous.

The warning returned varies on whether the line itself is blank,
for easier filtering for those who want to indent their blank lines.

Okay: spam(1)\n#
W291: spam(1) \n#
W293: class Foo(object):\n    \n    bang = 12

Line too long (86 > 79 characters)
Open

                # Here we need to find the splitting plate value that is valid for the
Severity: Minor
Found in hyperstream/factor/factor.py by pep8

Limit all lines to a maximum of 79 characters.

There are still many devices around that are limited to 80 character
lines; plus, limiting windows to 80 characters makes it possible to
have several windows side-by-side.  The default wrapping on such
devices looks ugly.  Therefore, please limit all lines to a maximum
of 79 characters. For flowing long blocks of text (docstrings or
comments), limiting the length to 72 characters is recommended.

Reports error E501.

Line too long (82 > 79 characters)
Open

            self.tool.__class__.__name__, time_interval.start, time_interval.end))
Severity: Minor
Found in hyperstream/factor/factor.py by pep8

Limit all lines to a maximum of 79 characters.

There are still many devices around that are limited to 80 character
lines; plus, limiting windows to 80 characters makes it possible to
have several windows side-by-side.  The default wrapping on such
devices looks ugly.  Therefore, please limit all lines to a maximum
of 79 characters. For flowing long blocks of text (docstrings or
comments), limiting the length to 72 characters is recommended.

Reports error E501.

Line too long (83 > 79 characters)
Open

                    logging.warn("{} with value {} not valid for source {}".format(
Severity: Minor
Found in hyperstream/factor/factor.py by pep8

Limit all lines to a maximum of 79 characters.

There are still many devices around that are limited to 80 character
lines; plus, limiting windows to 80 characters makes it possible to
have several windows side-by-side.  The default wrapping on such
devices looks ugly.  Therefore, please limit all lines to a maximum
of 79 characters. For flowing long blocks of text (docstrings or
comments), limiting the length to 72 characters is recommended.

Reports error E501.

Line too long (82 > 79 characters)
Open

            raise ValueError("Expected node, got {}".format(type(alignment_node)))
Severity: Minor
Found in hyperstream/factor/factor.py by pep8

Limit all lines to a maximum of 79 characters.

There are still many devices around that are limited to 80 character
lines; plus, limiting windows to 80 characters makes it possible to
have several windows side-by-side.  The default wrapping on such
devices looks ugly.  Therefore, please limit all lines to a maximum
of 79 characters. For flowing long blocks of text (docstrings or
comments), limiting the length to 72 characters is recommended.

Reports error E501.

Missing whitespace around operator
Open

                    (len(self.sink.plates)==1 and counts == [1, 0] and is_sub_plate) or \
Severity: Minor
Found in hyperstream/factor/factor.py by pep8

Surround operators with a single space on either side.

- Always surround these binary operators with a single space on
  either side: assignment (=), augmented assignment (+=, -= etc.),
  comparisons (==, <, >, !=, <=, >=, in, not in, is, is not),
  Booleans (and, or, not).

- If operators with different priorities are used, consider adding
  whitespace around the operators with the lowest priorities.

Okay: i = i + 1
Okay: submitted += 1
Okay: x = x * 2 - 1
Okay: hypot2 = x * x + y * y
Okay: c = (a + b) * (a - b)
Okay: foo(bar, key='word', *args, **kwargs)
Okay: alpha[:-i]

E225: i=i+1
E225: submitted +=1
E225: x = x /2 - 1
E225: z = x **y
E225: z = 1and 1
E226: c = (a+b) * (a-b)
E226: hypot2 = x*x + y*y
E227: c = a|b
E228: msg = fmt%(errno, errmsg)

Line too long (81 > 79 characters)
Open

                        # Special case of tools that are performing sub-selection
Severity: Minor
Found in hyperstream/factor/factor.py by pep8

Limit all lines to a maximum of 79 characters.

There are still many devices around that are limited to 80 character
lines; plus, limiting windows to 80 characters makes it possible to
have several windows side-by-side.  The default wrapping on such
devices looks ugly.  Therefore, please limit all lines to a maximum
of 79 characters. For flowing long blocks of text (docstrings or
comments), limiting the length to 72 characters is recommended.

Reports error E501.

Line too long (98 > 79 characters)
Open

                        source_plates = sorted(p.plate_id for s in self.sources for p in s.plates)
Severity: Minor
Found in hyperstream/factor/factor.py by pep8

Limit all lines to a maximum of 79 characters.

There are still many devices around that are limited to 80 character
lines; plus, limiting windows to 80 characters makes it possible to
have several windows side-by-side.  The default wrapping on such
devices looks ugly.  Therefore, please limit all lines to a maximum
of 79 characters. For flowing long blocks of text (docstrings or
comments), limiting the length to 72 characters is recommended.

Reports error E501.

Line too long (89 > 79 characters)
Open

                                  alignment_stream=self.get_alignment_stream(None, None))
Severity: Minor
Found in hyperstream/factor/factor.py by pep8

Limit all lines to a maximum of 79 characters.

There are still many devices around that are limited to 80 character
lines; plus, limiting windows to 80 characters makes it possible to
have several windows side-by-side.  The default wrapping on such
devices looks ugly.  Therefore, please limit all lines to a maximum
of 79 characters. For flowing long blocks of text (docstrings or
comments), limiting the length to 72 characters is recommended.

Reports error E501.

Line too long (84 > 79 characters)
Open

    def __init__(self, tool, source_node, input_plate, output_plate, plate_manager):
Severity: Minor
Found in hyperstream/factor/factor.py by pep8

Limit all lines to a maximum of 79 characters.

There are still many devices around that are limited to 80 character
lines; plus, limiting windows to 80 characters makes it possible to
have several windows side-by-side.  The default wrapping on such
devices looks ugly.  Therefore, please limit all lines to a maximum
of 79 characters. For flowing long blocks of text (docstrings or
comments), limiting the length to 72 characters is recommended.

Reports error E501.

Line too long (85 > 79 characters)
Open

                        source=source, interval=time_interval, input_plate_value=ppv)
Severity: Minor
Found in hyperstream/factor/factor.py by pep8

Limit all lines to a maximum of 79 characters.

There are still many devices around that are limited to 80 character
lines; plus, limiting windows to 80 characters makes it possible to
have several windows side-by-side.  The default wrapping on such
devices looks ugly.  Therefore, please limit all lines to a maximum
of 79 characters. For flowing long blocks of text (docstrings or
comments), limiting the length to 72 characters is recommended.

Reports error E501.

Line too long (83 > 79 characters)
Open

            input_plate_value = ".".join("_".join(i) for i in ipv) if ipv else None
Severity: Minor
Found in hyperstream/factor/factor.py by pep8

Limit all lines to a maximum of 79 characters.

There are still many devices around that are limited to 80 character
lines; plus, limiting windows to 80 characters makes it possible to
have several windows side-by-side.  The default wrapping on such
devices looks ugly.  Therefore, please limit all lines to a maximum
of 79 characters. For flowing long blocks of text (docstrings or
comments), limiting the length to 72 characters is recommended.

Reports error E501.

Line too long (103 > 79 characters)
Open

                    identifier = input_plate_value + "." + self.output_plate["meta_data_id"] + "_" + pv
Severity: Minor
Found in hyperstream/factor/factor.py by pep8

Limit all lines to a maximum of 79 characters.

There are still many devices around that are limited to 80 character
lines; plus, limiting windows to 80 characters makes it possible to
have several windows side-by-side.  The default wrapping on such
devices looks ugly.  Therefore, please limit all lines to a maximum
of 79 characters. For flowing long blocks of text (docstrings or
comments), limiting the length to 72 characters is recommended.

Reports error E501.

There are no issues that match your filters.

Category
Status