Sign upLogin

LiberTEM/LiberTEM

View on GitHub
Star

Showing 220 of 903 total issues

Similar blocks of code found in 2 locations. Consider refactoring.
Open

const RingMaskAnalysis: React.FC<CompoundAnalysisProps> = ({ compoundAnalysis, dataset }) => {
    const { shape } = dataset.params;
    const [scanHeight, scanWidth, imageHeight, imageWidth] = shape;
    const minLength = Math.min(imageWidth, imageHeight);
Severity: Major
Found in client/src/compoundAnalysis/components/RingMaskAnalysis.tsx and 1 other location - About 5 days to fix
client/src/compoundAnalysis/components/FEM.tsx on lines 17..120

Duplicated Code

Duplicated code can lead to software that is hard to understand and difficult to change. The Don't Repeat Yourself (DRY) principle states:

Every piece of knowledge must have a single, unambiguous, authoritative representation within a system.

When you violate DRY, bugs and maintenance problems are sure to follow. Duplicated code has a tendency to both continue to replicate and also to diverge (leaving bugs as two similar implementations differ in subtle ways).

Tuning

This issue has a mass of 974.

We set useful threshold defaults for the languages we support but you may want to adjust these settings based on your project guidelines.

The threshold configuration represents the minimum mass a code block must have to be analyzed for duplication. The lower the threshold, the more fine-grained the comparison.

If the engine is too easily reporting duplication, try raising the threshold. If you suspect that the engine isn't catching enough duplication, try lowering the threshold. The best setting tends to differ from language to language.

See codeclimate-duplication's documentation for more information about tuning the mass threshold in your .codeclimate.yml.

Refactorings

Further Reading

Similar blocks of code found in 2 locations. Consider refactoring.
Open

const FEMAnalysis: React.FC<CompoundAnalysisProps> = ({ compoundAnalysis, dataset }) => {
    const { shape } = dataset.params;
    const [scanHeight, scanWidth, imageHeight, imageWidth] = shape;
    const minLength = Math.min(imageWidth, imageHeight);
Severity: Major
Found in client/src/compoundAnalysis/components/FEM.tsx and 1 other location - About 5 days to fix
client/src/compoundAnalysis/components/RingMaskAnalysis.tsx on lines 17..120

Duplicated Code

Duplicated code can lead to software that is hard to understand and difficult to change. The Don't Repeat Yourself (DRY) principle states:

Every piece of knowledge must have a single, unambiguous, authoritative representation within a system.

When you violate DRY, bugs and maintenance problems are sure to follow. Duplicated code has a tendency to both continue to replicate and also to diverge (leaving bugs as two similar implementations differ in subtle ways).

Tuning

This issue has a mass of 974.

We set useful threshold defaults for the languages we support but you may want to adjust these settings based on your project guidelines.

The threshold configuration represents the minimum mass a code block must have to be analyzed for duplication. The lower the threshold, the more fine-grained the comparison.

If the engine is too easily reporting duplication, try raising the threshold. If you suspect that the engine isn't catching enough duplication, try lowering the threshold. The best setting tends to differ from language to language.

See codeclimate-duplication's documentation for more information about tuning the mass threshold in your .codeclimate.yml.

Refactorings

Further Reading

Similar blocks of code found in 5 locations. Consider refactoring.
Open

const BLOFileParamsForm: React.FC<MergedProps> = ({
    values,
    info,
    isSubmitting,
    handleSubmit,
Severity: Major
Found in client/src/dataset/components/BLOParamsForm.tsx and 4 other locations - About 2 days to fix
client/src/dataset/components/MIBParamsForm.tsx on lines 25..56
client/src/dataset/components/NPYParamsForm.tsx on lines 25..56
client/src/dataset/components/SEQParamsForm.tsx on lines 25..56
client/src/dataset/components/TVIPSParamsForm.tsx on lines 25..56

Duplicated Code

Duplicated code can lead to software that is hard to understand and difficult to change. The Don't Repeat Yourself (DRY) principle states:

Every piece of knowledge must have a single, unambiguous, authoritative representation within a system.

When you violate DRY, bugs and maintenance problems are sure to follow. Duplicated code has a tendency to both continue to replicate and also to diverge (leaving bugs as two similar implementations differ in subtle ways).

Tuning

This issue has a mass of 399.

We set useful threshold defaults for the languages we support but you may want to adjust these settings based on your project guidelines.

The threshold configuration represents the minimum mass a code block must have to be analyzed for duplication. The lower the threshold, the more fine-grained the comparison.

If the engine is too easily reporting duplication, try raising the threshold. If you suspect that the engine isn't catching enough duplication, try lowering the threshold. The best setting tends to differ from language to language.

See codeclimate-duplication's documentation for more information about tuning the mass threshold in your .codeclimate.yml.

Refactorings

Further Reading

Similar blocks of code found in 5 locations. Consider refactoring.
Open

const TVIPSFileParamsForm: React.FC<MergedProps> = ({
    values,
    info,
    isSubmitting,
    handleSubmit,
Severity: Major
Found in client/src/dataset/components/TVIPSParamsForm.tsx and 4 other locations - About 2 days to fix
client/src/dataset/components/BLOParamsForm.tsx on lines 23..54
client/src/dataset/components/MIBParamsForm.tsx on lines 25..56
client/src/dataset/components/NPYParamsForm.tsx on lines 25..56
client/src/dataset/components/SEQParamsForm.tsx on lines 25..56

Duplicated Code

Duplicated code can lead to software that is hard to understand and difficult to change. The Don't Repeat Yourself (DRY) principle states:

Every piece of knowledge must have a single, unambiguous, authoritative representation within a system.

When you violate DRY, bugs and maintenance problems are sure to follow. Duplicated code has a tendency to both continue to replicate and also to diverge (leaving bugs as two similar implementations differ in subtle ways).

Tuning

This issue has a mass of 399.

We set useful threshold defaults for the languages we support but you may want to adjust these settings based on your project guidelines.

The threshold configuration represents the minimum mass a code block must have to be analyzed for duplication. The lower the threshold, the more fine-grained the comparison.

If the engine is too easily reporting duplication, try raising the threshold. If you suspect that the engine isn't catching enough duplication, try lowering the threshold. The best setting tends to differ from language to language.

See codeclimate-duplication's documentation for more information about tuning the mass threshold in your .codeclimate.yml.

Refactorings

Further Reading

Similar blocks of code found in 5 locations. Consider refactoring.
Open

const NPYFileParamsForm: React.FC<MergedProps> = ({
    values,
    info,
    isSubmitting,
    handleSubmit,
Severity: Major
Found in client/src/dataset/components/NPYParamsForm.tsx and 4 other locations - About 2 days to fix
client/src/dataset/components/BLOParamsForm.tsx on lines 23..54
client/src/dataset/components/MIBParamsForm.tsx on lines 25..56
client/src/dataset/components/SEQParamsForm.tsx on lines 25..56
client/src/dataset/components/TVIPSParamsForm.tsx on lines 25..56

Duplicated Code

Duplicated code can lead to software that is hard to understand and difficult to change. The Don't Repeat Yourself (DRY) principle states:

Every piece of knowledge must have a single, unambiguous, authoritative representation within a system.

When you violate DRY, bugs and maintenance problems are sure to follow. Duplicated code has a tendency to both continue to replicate and also to diverge (leaving bugs as two similar implementations differ in subtle ways).

Tuning

This issue has a mass of 399.

We set useful threshold defaults for the languages we support but you may want to adjust these settings based on your project guidelines.

The threshold configuration represents the minimum mass a code block must have to be analyzed for duplication. The lower the threshold, the more fine-grained the comparison.

If the engine is too easily reporting duplication, try raising the threshold. If you suspect that the engine isn't catching enough duplication, try lowering the threshold. The best setting tends to differ from language to language.

See codeclimate-duplication's documentation for more information about tuning the mass threshold in your .codeclimate.yml.

Refactorings

Further Reading

Similar blocks of code found in 5 locations. Consider refactoring.
Open

const SEQFileParamsForm: React.FC<MergedProps> = ({
    values,
    info,
    isSubmitting,
    handleSubmit,
Severity: Major
Found in client/src/dataset/components/SEQParamsForm.tsx and 4 other locations - About 2 days to fix
client/src/dataset/components/BLOParamsForm.tsx on lines 23..54
client/src/dataset/components/MIBParamsForm.tsx on lines 25..56
client/src/dataset/components/NPYParamsForm.tsx on lines 25..56
client/src/dataset/components/TVIPSParamsForm.tsx on lines 25..56

Duplicated Code

Duplicated code can lead to software that is hard to understand and difficult to change. The Don't Repeat Yourself (DRY) principle states:

Every piece of knowledge must have a single, unambiguous, authoritative representation within a system.

When you violate DRY, bugs and maintenance problems are sure to follow. Duplicated code has a tendency to both continue to replicate and also to diverge (leaving bugs as two similar implementations differ in subtle ways).

Tuning

This issue has a mass of 399.

We set useful threshold defaults for the languages we support but you may want to adjust these settings based on your project guidelines.

The threshold configuration represents the minimum mass a code block must have to be analyzed for duplication. The lower the threshold, the more fine-grained the comparison.

If the engine is too easily reporting duplication, try raising the threshold. If you suspect that the engine isn't catching enough duplication, try lowering the threshold. The best setting tends to differ from language to language.

See codeclimate-duplication's documentation for more information about tuning the mass threshold in your .codeclimate.yml.

Refactorings

Further Reading

Similar blocks of code found in 5 locations. Consider refactoring.
Open

const MIBFileParamsForm: React.FC<MergedProps> = ({
    values,
    info,
    isSubmitting,
    handleSubmit,
Severity: Major
Found in client/src/dataset/components/MIBParamsForm.tsx and 4 other locations - About 2 days to fix
client/src/dataset/components/BLOParamsForm.tsx on lines 23..54
client/src/dataset/components/NPYParamsForm.tsx on lines 25..56
client/src/dataset/components/SEQParamsForm.tsx on lines 25..56
client/src/dataset/components/TVIPSParamsForm.tsx on lines 25..56

Duplicated Code

Duplicated code can lead to software that is hard to understand and difficult to change. The Don't Repeat Yourself (DRY) principle states:

Every piece of knowledge must have a single, unambiguous, authoritative representation within a system.

When you violate DRY, bugs and maintenance problems are sure to follow. Duplicated code has a tendency to both continue to replicate and also to diverge (leaving bugs as two similar implementations differ in subtle ways).

Tuning

This issue has a mass of 399.

We set useful threshold defaults for the languages we support but you may want to adjust these settings based on your project guidelines.

The threshold configuration represents the minimum mass a code block must have to be analyzed for duplication. The lower the threshold, the more fine-grained the comparison.

If the engine is too easily reporting duplication, try raising the threshold. If you suspect that the engine isn't catching enough duplication, try lowering the threshold. The best setting tends to differ from language to language.

See codeclimate-duplication's documentation for more information about tuning the mass threshold in your .codeclimate.yml.

Refactorings

Further Reading

Similar blocks of code found in 3 locations. Consider refactoring.
Open

const FRMS6ParamsForm: React.FC<MergedProps> = ({
    values,
    info,
    isSubmitting,
    handleSubmit,
Severity: Major
Found in client/src/dataset/components/FRMS6ParamsForm.tsx and 2 other locations - About 2 days to fix
client/src/dataset/components/EMPADParamsForm.tsx on lines 23..53
client/src/dataset/components/K2ISParamsForm.tsx on lines 23..53

Duplicated Code

Duplicated code can lead to software that is hard to understand and difficult to change. The Don't Repeat Yourself (DRY) principle states:

Every piece of knowledge must have a single, unambiguous, authoritative representation within a system.

When you violate DRY, bugs and maintenance problems are sure to follow. Duplicated code has a tendency to both continue to replicate and also to diverge (leaving bugs as two similar implementations differ in subtle ways).

Tuning

This issue has a mass of 390.

We set useful threshold defaults for the languages we support but you may want to adjust these settings based on your project guidelines.

The threshold configuration represents the minimum mass a code block must have to be analyzed for duplication. The lower the threshold, the more fine-grained the comparison.

If the engine is too easily reporting duplication, try raising the threshold. If you suspect that the engine isn't catching enough duplication, try lowering the threshold. The best setting tends to differ from language to language.

See codeclimate-duplication's documentation for more information about tuning the mass threshold in your .codeclimate.yml.

Refactorings

Further Reading

Similar blocks of code found in 3 locations. Consider refactoring.
Open

const K2ISFileParamsForm: React.FC<MergedProps> = ({
    values,
    info,
    isSubmitting,
    handleSubmit,
Severity: Major
Found in client/src/dataset/components/K2ISParamsForm.tsx and 2 other locations - About 2 days to fix
client/src/dataset/components/EMPADParamsForm.tsx on lines 23..53
client/src/dataset/components/FRMS6ParamsForm.tsx on lines 23..53

Duplicated Code

Duplicated code can lead to software that is hard to understand and difficult to change. The Don't Repeat Yourself (DRY) principle states:

Every piece of knowledge must have a single, unambiguous, authoritative representation within a system.

When you violate DRY, bugs and maintenance problems are sure to follow. Duplicated code has a tendency to both continue to replicate and also to diverge (leaving bugs as two similar implementations differ in subtle ways).

Tuning

This issue has a mass of 390.

We set useful threshold defaults for the languages we support but you may want to adjust these settings based on your project guidelines.

The threshold configuration represents the minimum mass a code block must have to be analyzed for duplication. The lower the threshold, the more fine-grained the comparison.

If the engine is too easily reporting duplication, try raising the threshold. If you suspect that the engine isn't catching enough duplication, try lowering the threshold. The best setting tends to differ from language to language.

See codeclimate-duplication's documentation for more information about tuning the mass threshold in your .codeclimate.yml.

Refactorings

Further Reading

Similar blocks of code found in 3 locations. Consider refactoring.
Open

const EMPADParamsForm: React.FC<MergedProps> = ({
    values,
    info,
    isSubmitting,
    handleSubmit,
Severity: Major
Found in client/src/dataset/components/EMPADParamsForm.tsx and 2 other locations - About 2 days to fix
client/src/dataset/components/FRMS6ParamsForm.tsx on lines 23..53
client/src/dataset/components/K2ISParamsForm.tsx on lines 23..53

Duplicated Code

Duplicated code can lead to software that is hard to understand and difficult to change. The Don't Repeat Yourself (DRY) principle states:

Every piece of knowledge must have a single, unambiguous, authoritative representation within a system.

When you violate DRY, bugs and maintenance problems are sure to follow. Duplicated code has a tendency to both continue to replicate and also to diverge (leaving bugs as two similar implementations differ in subtle ways).

Tuning

This issue has a mass of 390.

We set useful threshold defaults for the languages we support but you may want to adjust these settings based on your project guidelines.

The threshold configuration represents the minimum mass a code block must have to be analyzed for duplication. The lower the threshold, the more fine-grained the comparison.

If the engine is too easily reporting duplication, try raising the threshold. If you suspect that the engine isn't catching enough duplication, try lowering the threshold. The best setting tends to differ from language to language.

See codeclimate-duplication's documentation for more information about tuning the mass threshold in your .codeclimate.yml.

Refactorings

Further Reading

Similar blocks of code found in 2 locations. Consider refactoring.
Open

const SERParamsForm: React.FC<MergedProps> = ({
    values,
    info,
    isSubmitting,
    handleSubmit,
Severity: Major
Found in client/src/dataset/components/SERParamsForm.tsx and 1 other location - About 1 day to fix
client/src/dataset/components/RawCSRParamsForm.tsx on lines 22..43

Duplicated Code

Duplicated code can lead to software that is hard to understand and difficult to change. The Don't Repeat Yourself (DRY) principle states:

Every piece of knowledge must have a single, unambiguous, authoritative representation within a system.

When you violate DRY, bugs and maintenance problems are sure to follow. Duplicated code has a tendency to both continue to replicate and also to diverge (leaving bugs as two similar implementations differ in subtle ways).

Tuning

This issue has a mass of 300.

We set useful threshold defaults for the languages we support but you may want to adjust these settings based on your project guidelines.

The threshold configuration represents the minimum mass a code block must have to be analyzed for duplication. The lower the threshold, the more fine-grained the comparison.

If the engine is too easily reporting duplication, try raising the threshold. If you suspect that the engine isn't catching enough duplication, try lowering the threshold. The best setting tends to differ from language to language.

See codeclimate-duplication's documentation for more information about tuning the mass threshold in your .codeclimate.yml.

Refactorings

Further Reading

Similar blocks of code found in 2 locations. Consider refactoring.
Open

const RawCSRParamsForm: React.FC<MergedProps> = ({
    values,
    info,
    isSubmitting,
    handleSubmit,
Severity: Major
Found in client/src/dataset/components/RawCSRParamsForm.tsx and 1 other location - About 1 day to fix
client/src/dataset/components/SERParamsForm.tsx on lines 22..43

Duplicated Code

Duplicated code can lead to software that is hard to understand and difficult to change. The Don't Repeat Yourself (DRY) principle states:

Every piece of knowledge must have a single, unambiguous, authoritative representation within a system.

When you violate DRY, bugs and maintenance problems are sure to follow. Duplicated code has a tendency to both continue to replicate and also to diverge (leaving bugs as two similar implementations differ in subtle ways).

Tuning

This issue has a mass of 300.

We set useful threshold defaults for the languages we support but you may want to adjust these settings based on your project guidelines.

The threshold configuration represents the minimum mass a code block must have to be analyzed for duplication. The lower the threshold, the more fine-grained the comparison.

If the engine is too easily reporting duplication, try raising the threshold. If you suspect that the engine isn't catching enough duplication, try lowering the threshold. The best setting tends to differ from language to language.

See codeclimate-duplication's documentation for more information about tuning the mass threshold in your .codeclimate.yml.

Refactorings

Further Reading

Similar blocks of code found in 4 locations. Consider refactoring.
Open

export default withValidation<DatasetParamsEMPAD, DatasetParamsEMPADForForm, DatasetInfoEMPAD>({
    mapPropsToValues: ({ path, initial }) => ({
        name: getInitialName("name", path, initial),
        nav_shape: adjustShapeWithBounds(getInitial("nav_shape", "", initial).toString(), "nav"),
        sig_shape: adjustShapeWithBounds(getInitial("sig_shape", "", initial).toString(), "sig"),
Severity: Major
Found in client/src/dataset/components/EMPADParamsForm.tsx and 3 other locations - About 1 day to fix
client/src/dataset/components/BLOParamsForm.tsx on lines 56..81
client/src/dataset/components/FRMS6ParamsForm.tsx on lines 55..79
client/src/dataset/components/K2ISParamsForm.tsx on lines 55..79

Duplicated Code

Duplicated code can lead to software that is hard to understand and difficult to change. The Don't Repeat Yourself (DRY) principle states:

Every piece of knowledge must have a single, unambiguous, authoritative representation within a system.

When you violate DRY, bugs and maintenance problems are sure to follow. Duplicated code has a tendency to both continue to replicate and also to diverge (leaving bugs as two similar implementations differ in subtle ways).

Tuning

This issue has a mass of 250.

We set useful threshold defaults for the languages we support but you may want to adjust these settings based on your project guidelines.

The threshold configuration represents the minimum mass a code block must have to be analyzed for duplication. The lower the threshold, the more fine-grained the comparison.

If the engine is too easily reporting duplication, try raising the threshold. If you suspect that the engine isn't catching enough duplication, try lowering the threshold. The best setting tends to differ from language to language.

See codeclimate-duplication's documentation for more information about tuning the mass threshold in your .codeclimate.yml.

Refactorings

Further Reading

Similar blocks of code found in 4 locations. Consider refactoring.
Open

export default withValidation<DatasetParamsSEQ, DatasetParamsSEQForForm, DatasetInfoSEQ>({
    formToJson: (values, path) => ({
        path,
        type: DatasetTypes.SEQ,
        name: values.name,
Severity: Major
Found in client/src/dataset/components/SEQParamsForm.tsx and 3 other locations - About 1 day to fix
client/src/dataset/components/MIBParamsForm.tsx on lines 58..82
client/src/dataset/components/NPYParamsForm.tsx on lines 58..82
client/src/dataset/components/TVIPSParamsForm.tsx on lines 58..82

Duplicated Code

Duplicated code can lead to software that is hard to understand and difficult to change. The Don't Repeat Yourself (DRY) principle states:

Every piece of knowledge must have a single, unambiguous, authoritative representation within a system.

When you violate DRY, bugs and maintenance problems are sure to follow. Duplicated code has a tendency to both continue to replicate and also to diverge (leaving bugs as two similar implementations differ in subtle ways).

Tuning

This issue has a mass of 250.

We set useful threshold defaults for the languages we support but you may want to adjust these settings based on your project guidelines.

The threshold configuration represents the minimum mass a code block must have to be analyzed for duplication. The lower the threshold, the more fine-grained the comparison.

If the engine is too easily reporting duplication, try raising the threshold. If you suspect that the engine isn't catching enough duplication, try lowering the threshold. The best setting tends to differ from language to language.

See codeclimate-duplication's documentation for more information about tuning the mass threshold in your .codeclimate.yml.

Refactorings

Further Reading

Similar blocks of code found in 4 locations. Consider refactoring.
Open

export default withValidation<DatasetParamsTVIPS, DatasetParamsTVIPSForForm, DatasetInfoTVIPS>({
    formToJson: (values, path) => ({
        path,
        type: DatasetTypes.TVIPS,
        name: values.name,
Severity: Major
Found in client/src/dataset/components/TVIPSParamsForm.tsx and 3 other locations - About 1 day to fix
client/src/dataset/components/MIBParamsForm.tsx on lines 58..82
client/src/dataset/components/NPYParamsForm.tsx on lines 58..82
client/src/dataset/components/SEQParamsForm.tsx on lines 58..82

Duplicated Code

Duplicated code can lead to software that is hard to understand and difficult to change. The Don't Repeat Yourself (DRY) principle states:

Every piece of knowledge must have a single, unambiguous, authoritative representation within a system.

When you violate DRY, bugs and maintenance problems are sure to follow. Duplicated code has a tendency to both continue to replicate and also to diverge (leaving bugs as two similar implementations differ in subtle ways).

Tuning

This issue has a mass of 250.

We set useful threshold defaults for the languages we support but you may want to adjust these settings based on your project guidelines.

The threshold configuration represents the minimum mass a code block must have to be analyzed for duplication. The lower the threshold, the more fine-grained the comparison.

If the engine is too easily reporting duplication, try raising the threshold. If you suspect that the engine isn't catching enough duplication, try lowering the threshold. The best setting tends to differ from language to language.

See codeclimate-duplication's documentation for more information about tuning the mass threshold in your .codeclimate.yml.

Refactorings

Further Reading

Similar blocks of code found in 4 locations. Consider refactoring.
Open

export default withValidation<DatasetParamsMIB, DatasetParamsMIBForForm, DatasetInfoMIB>({
    formToJson: (values, path) => ({
        path,
        type: DatasetTypes.MIB,
        name: values.name,
Severity: Major
Found in client/src/dataset/components/MIBParamsForm.tsx and 3 other locations - About 1 day to fix
client/src/dataset/components/NPYParamsForm.tsx on lines 58..82
client/src/dataset/components/SEQParamsForm.tsx on lines 58..82
client/src/dataset/components/TVIPSParamsForm.tsx on lines 58..82

Duplicated Code

Duplicated code can lead to software that is hard to understand and difficult to change. The Don't Repeat Yourself (DRY) principle states:

Every piece of knowledge must have a single, unambiguous, authoritative representation within a system.

When you violate DRY, bugs and maintenance problems are sure to follow. Duplicated code has a tendency to both continue to replicate and also to diverge (leaving bugs as two similar implementations differ in subtle ways).

Tuning

This issue has a mass of 250.

We set useful threshold defaults for the languages we support but you may want to adjust these settings based on your project guidelines.

The threshold configuration represents the minimum mass a code block must have to be analyzed for duplication. The lower the threshold, the more fine-grained the comparison.

If the engine is too easily reporting duplication, try raising the threshold. If you suspect that the engine isn't catching enough duplication, try lowering the threshold. The best setting tends to differ from language to language.

See codeclimate-duplication's documentation for more information about tuning the mass threshold in your .codeclimate.yml.

Refactorings

Further Reading

Similar blocks of code found in 4 locations. Consider refactoring.
Open

export default withValidation<DatasetParamsK2IS, DatasetParamsK2ISForForm, DatasetInfoK2IS>({
    mapPropsToValues: ({ path, initial }) => ({
        name: getInitialName("name", path, initial),
        nav_shape: adjustShapeWithBounds(getInitial("nav_shape", "", initial).toString(), "nav"),
        sig_shape: adjustShapeWithBounds(getInitial("sig_shape", "", initial).toString(), "sig"),
Severity: Major
Found in client/src/dataset/components/K2ISParamsForm.tsx and 3 other locations - About 1 day to fix
client/src/dataset/components/BLOParamsForm.tsx on lines 56..81
client/src/dataset/components/EMPADParamsForm.tsx on lines 55..79
client/src/dataset/components/FRMS6ParamsForm.tsx on lines 55..79

Duplicated Code

Duplicated code can lead to software that is hard to understand and difficult to change. The Don't Repeat Yourself (DRY) principle states:

Every piece of knowledge must have a single, unambiguous, authoritative representation within a system.

When you violate DRY, bugs and maintenance problems are sure to follow. Duplicated code has a tendency to both continue to replicate and also to diverge (leaving bugs as two similar implementations differ in subtle ways).

Tuning

This issue has a mass of 250.

We set useful threshold defaults for the languages we support but you may want to adjust these settings based on your project guidelines.

The threshold configuration represents the minimum mass a code block must have to be analyzed for duplication. The lower the threshold, the more fine-grained the comparison.

If the engine is too easily reporting duplication, try raising the threshold. If you suspect that the engine isn't catching enough duplication, try lowering the threshold. The best setting tends to differ from language to language.

See codeclimate-duplication's documentation for more information about tuning the mass threshold in your .codeclimate.yml.

Refactorings

Further Reading

Similar blocks of code found in 4 locations. Consider refactoring.
Open

export default withValidation<DatasetParamsNPY, DatasetParamsNPYForForm, DatasetInfoNPY>({
    formToJson: (values, path) => ({
        path,
        type: DatasetTypes.NPY,
        name: values.name,
Severity: Major
Found in client/src/dataset/components/NPYParamsForm.tsx and 3 other locations - About 1 day to fix
client/src/dataset/components/MIBParamsForm.tsx on lines 58..82
client/src/dataset/components/SEQParamsForm.tsx on lines 58..82
client/src/dataset/components/TVIPSParamsForm.tsx on lines 58..82

Duplicated Code

Duplicated code can lead to software that is hard to understand and difficult to change. The Don't Repeat Yourself (DRY) principle states:

Every piece of knowledge must have a single, unambiguous, authoritative representation within a system.

When you violate DRY, bugs and maintenance problems are sure to follow. Duplicated code has a tendency to both continue to replicate and also to diverge (leaving bugs as two similar implementations differ in subtle ways).

Tuning

This issue has a mass of 250.

We set useful threshold defaults for the languages we support but you may want to adjust these settings based on your project guidelines.

The threshold configuration represents the minimum mass a code block must have to be analyzed for duplication. The lower the threshold, the more fine-grained the comparison.

If the engine is too easily reporting duplication, try raising the threshold. If you suspect that the engine isn't catching enough duplication, try lowering the threshold. The best setting tends to differ from language to language.

See codeclimate-duplication's documentation for more information about tuning the mass threshold in your .codeclimate.yml.

Refactorings

Further Reading

Similar blocks of code found in 4 locations. Consider refactoring.
Open

export default withValidation<DatasetParamsBLO, DatasetParamsBLOForForm, DatasetInfoBLO>({
    mapPropsToValues: ({ path, initial }) => ({
        name: getInitialName("name", path, initial),
        nav_shape: adjustShapeWithBounds(getInitial("nav_shape", "", initial).toString(), "nav"),
        sig_shape: adjustShapeWithBounds(getInitial("sig_shape", "", initial).toString(), "sig"),
Severity: Major
Found in client/src/dataset/components/BLOParamsForm.tsx and 3 other locations - About 1 day to fix
client/src/dataset/components/EMPADParamsForm.tsx on lines 55..79
client/src/dataset/components/FRMS6ParamsForm.tsx on lines 55..79
client/src/dataset/components/K2ISParamsForm.tsx on lines 55..79

Duplicated Code

Duplicated code can lead to software that is hard to understand and difficult to change. The Don't Repeat Yourself (DRY) principle states:

Every piece of knowledge must have a single, unambiguous, authoritative representation within a system.

When you violate DRY, bugs and maintenance problems are sure to follow. Duplicated code has a tendency to both continue to replicate and also to diverge (leaving bugs as two similar implementations differ in subtle ways).

Tuning

This issue has a mass of 250.

We set useful threshold defaults for the languages we support but you may want to adjust these settings based on your project guidelines.

The threshold configuration represents the minimum mass a code block must have to be analyzed for duplication. The lower the threshold, the more fine-grained the comparison.

If the engine is too easily reporting duplication, try raising the threshold. If you suspect that the engine isn't catching enough duplication, try lowering the threshold. The best setting tends to differ from language to language.

See codeclimate-duplication's documentation for more information about tuning the mass threshold in your .codeclimate.yml.

Refactorings

Further Reading

Similar blocks of code found in 4 locations. Consider refactoring.
Open

export default withValidation<DatasetParamsFRMS6, DatasetParamsFRMS6ForForm, DatasetInfoFRMS6>({
    mapPropsToValues: ({ path, initial }) => ({
        name: getInitialName("name", path, initial),
        nav_shape: adjustShapeWithBounds(getInitial("nav_shape", "", initial).toString(), "nav"),
        sig_shape: adjustShapeWithBounds(getInitial("sig_shape", "", initial).toString(), "sig"),
Severity: Major
Found in client/src/dataset/components/FRMS6ParamsForm.tsx and 3 other locations - About 1 day to fix
client/src/dataset/components/BLOParamsForm.tsx on lines 56..81
client/src/dataset/components/EMPADParamsForm.tsx on lines 55..79
client/src/dataset/components/K2ISParamsForm.tsx on lines 55..79

Duplicated Code

Duplicated code can lead to software that is hard to understand and difficult to change. The Don't Repeat Yourself (DRY) principle states:

Every piece of knowledge must have a single, unambiguous, authoritative representation within a system.

When you violate DRY, bugs and maintenance problems are sure to follow. Duplicated code has a tendency to both continue to replicate and also to diverge (leaving bugs as two similar implementations differ in subtle ways).

Tuning

This issue has a mass of 250.

We set useful threshold defaults for the languages we support but you may want to adjust these settings based on your project guidelines.

The threshold configuration represents the minimum mass a code block must have to be analyzed for duplication. The lower the threshold, the more fine-grained the comparison.

If the engine is too easily reporting duplication, try raising the threshold. If you suspect that the engine isn't catching enough duplication, try lowering the threshold. The best setting tends to differ from language to language.

See codeclimate-duplication's documentation for more information about tuning the mass threshold in your .codeclimate.yml.

Refactorings

Further Reading

Severity
Category
Status
Source
Language