Showing 118 of 118 total issues
Similar blocks of code found in 2 locations. Consider refactoring. Open
def self.copy_multiple(ids, domain, namespace = nil, overwrite = false)
new_ids = []
MiqAeClass.transaction do
ids.each do |id|
class_obj = MiqAeClass.find(id)
- Read upRead up
- Create a ticketCreate a ticket
Duplicated Code
Duplicated code can lead to software that is hard to understand and difficult to change. The Don't Repeat Yourself (DRY) principle states:
Every piece of knowledge must have a single, unambiguous, authoritative representation within a system.
When you violate DRY, bugs and maintenance problems are sure to follow. Duplicated code has a tendency to both continue to replicate and also to diverge (leaving bugs as two similar implementations differ in subtle ways).
Tuning
This issue has a mass of 36.
We set useful threshold defaults for the languages we support but you may want to adjust these settings based on your project guidelines.
The threshold configuration represents the minimum mass a code block must have to be analyzed for duplication. The lower the threshold, the more fine-grained the comparison.
If the engine is too easily reporting duplication, try raising the threshold. If you suspect that the engine isn't catching enough duplication, try lowering the threshold. The best setting tends to differ from language to language.
See codeclimate-duplication
's documentation for more information about tuning the mass threshold in your .codeclimate.yml
.
Refactorings
- Extract Method
- Extract Class
- Form Template Method
- Introduce Null Object
- Pull Up Method
- Pull Up Field
- Substitute Algorithm
Further Reading
- Don't Repeat Yourself on the C2 Wiki
- Duplicated Code on SourceMaking
- Refactoring: Improving the Design of Existing Code by Martin Fowler. Duplicated Code, p76
Method preimport_check
has a Cognitive Complexity of 13 (exceeds 11 allowed). Consider refactoring. Open
def preimport_check(domain_name, source_dom_source, dest_dom_source)
dest_domain_name = @options['import_as'] == '*' || @options['import_as'].nil? ? @domain_name : @options['import_as']
if source_dom_source == MiqAeDomain::SYSTEM_SOURCE
if @options['git_repository_id']
raise MiqAeException::InvalidDomain, _('Git based system domain import is not supported.')
- Read upRead up
- Create a ticketCreate a ticket
Cognitive Complexity
Cognitive Complexity is a measure of how difficult a unit of code is to intuitively understand. Unlike Cyclomatic Complexity, which determines how difficult your code will be to test, Cognitive Complexity tells you how difficult your code will be to read and comprehend.
A method's cognitive complexity is based on a few simple rules:
- Code is not considered more complex when it uses shorthand that the language provides for collapsing multiple statements into one
- Code is considered more complex for each "break in the linear flow of the code"
- Code is considered more complex when "flow breaking structures are nested"
Further reading
Method expose_class_attributes
has a Cognitive Complexity of 13 (exceeds 11 allowed). Consider refactoring. Open
def self.expose_class_attributes(subclass)
subclass.class_eval do
model.attribute_names.each do |attr|
next if model.private_method_defined?(attr)
next if EXPOSED_ATTR_BLACK_LIST.any? { |rexp| attr =~ rexp }
- Read upRead up
- Create a ticketCreate a ticket
Cognitive Complexity
Cognitive Complexity is a measure of how difficult a unit of code is to intuitively understand. Unlike Cyclomatic Complexity, which determines how difficult your code will be to test, Cognitive Complexity tells you how difficult your code will be to read and comprehend.
A method's cognitive complexity is based on a few simple rules:
- Code is not considered more complex when it uses shorthand that the language provides for collapsing multiple statements into one
- Code is considered more complex for each "break in the linear flow of the code"
- Code is considered more complex when "flow breaking structures are nested"
Further reading
Similar blocks of code found in 2 locations. Consider refactoring. Open
def visible_domain?(dom)
domains = @workspace.ae_user.current_tenant.visible_domains.collect(&:name).map(&:upcase)
return true if domains.include?(dom.upcase)
$miq_ae_logger.warn("domain=#{dom} : is not viewable", :resource_id => @workspace.find_miq_request_id)
- Read upRead up
- Create a ticketCreate a ticket
Duplicated Code
Duplicated code can lead to software that is hard to understand and difficult to change. The Don't Repeat Yourself (DRY) principle states:
Every piece of knowledge must have a single, unambiguous, authoritative representation within a system.
When you violate DRY, bugs and maintenance problems are sure to follow. Duplicated code has a tendency to both continue to replicate and also to diverge (leaving bugs as two similar implementations differ in subtle ways).
Tuning
This issue has a mass of 31.
We set useful threshold defaults for the languages we support but you may want to adjust these settings based on your project guidelines.
The threshold configuration represents the minimum mass a code block must have to be analyzed for duplication. The lower the threshold, the more fine-grained the comparison.
If the engine is too easily reporting duplication, try raising the threshold. If you suspect that the engine isn't catching enough duplication, try lowering the threshold. The best setting tends to differ from language to language.
See codeclimate-duplication
's documentation for more information about tuning the mass threshold in your .codeclimate.yml
.
Refactorings
- Extract Method
- Extract Class
- Form Template Method
- Introduce Null Object
- Pull Up Method
- Pull Up Field
- Substitute Algorithm
Further Reading
- Don't Repeat Yourself on the C2 Wiki
- Duplicated Code on SourceMaking
- Refactoring: Improving the Design of Existing Code by Martin Fowler. Duplicated Code, p76
Similar blocks of code found in 2 locations. Consider refactoring. Open
def owned_domain?(dom)
domains = @workspace.ae_user.current_tenant.ae_domains.collect(&:name).map(&:upcase)
return true if domains.include?(dom.upcase)
$miq_ae_logger.warn("domain=#{dom} : is not editable", :resource_id => @workspace.find_miq_request_id)
- Read upRead up
- Create a ticketCreate a ticket
Duplicated Code
Duplicated code can lead to software that is hard to understand and difficult to change. The Don't Repeat Yourself (DRY) principle states:
Every piece of knowledge must have a single, unambiguous, authoritative representation within a system.
When you violate DRY, bugs and maintenance problems are sure to follow. Duplicated code has a tendency to both continue to replicate and also to diverge (leaving bugs as two similar implementations differ in subtle ways).
Tuning
This issue has a mass of 31.
We set useful threshold defaults for the languages we support but you may want to adjust these settings based on your project guidelines.
The threshold configuration represents the minimum mass a code block must have to be analyzed for duplication. The lower the threshold, the more fine-grained the comparison.
If the engine is too easily reporting duplication, try raising the threshold. If you suspect that the engine isn't catching enough duplication, try lowering the threshold. The best setting tends to differ from language to language.
See codeclimate-duplication
's documentation for more information about tuning the mass threshold in your .codeclimate.yml
.
Refactorings
- Extract Method
- Extract Class
- Form Template Method
- Introduce Null Object
- Pull Up Method
- Pull Up Field
- Substitute Algorithm
Further Reading
- Don't Repeat Yourself on the C2 Wiki
- Duplicated Code on SourceMaking
- Refactoring: Improving the Design of Existing Code by Martin Fowler. Duplicated Code, p76
Avoid parameter lists longer than 5 parameters. [6/5] Open
def self.send_email(to, from, subject, body, *args, **kwargs)
- Read upRead up
- Create a ticketCreate a ticket
- Exclude checks
Checks for methods with too many parameters.
The maximum number of parameters is configurable. Keyword arguments can optionally be excluded from the total count, as they add less complexity than positional or optional parameters.
Any number of arguments for initialize
method inside a block of
Struct.new
and Data.define
like this is always allowed:
Struct.new(:one, :two, :three, :four, :five, keyword_init: true) do
def initialize(one:, two:, three:, four:, five:)
end
end
This is because checking the number of arguments of the initialize
method
does not make sense.
NOTE: Explicit block argument &block
is not counted to prevent
erroneous change that is avoided by making block argument implicit.
Example: Max: 3
# good
def foo(a, b, c = 1)
end
Example: Max: 2
# bad
def foo(a, b, c = 1)
end
Example: CountKeywordArgs: true (default)
# counts keyword args towards the maximum
# bad (assuming Max is 3)
def foo(a, b, c, d: 1)
end
# good (assuming Max is 3)
def foo(a, b, c: 1)
end
Example: CountKeywordArgs: false
# don't count keyword args towards the maximum
# good (assuming Max is 3)
def foo(a, b, c, d: 1)
end
This cop also checks for the maximum number of optional parameters.
This can be configured using the MaxOptionalParameters
config option.
Example: MaxOptionalParameters: 3 (default)
# good
def foo(a = 1, b = 2, c = 3)
end
Example: MaxOptionalParameters: 2
# bad
def foo(a = 1, b = 2, c = 3)
end
Similar blocks of code found in 2 locations. Consider refactoring. Open
def orchestration_template=(template)
if template && !template.kind_of?(MiqAeMethodService::MiqAeServiceOrchestrationTemplate)
raise ArgumentError, "template must be a MiqAeServiceOrchestrationTemplate or nil"
end
- Read upRead up
- Create a ticketCreate a ticket
Duplicated Code
Duplicated code can lead to software that is hard to understand and difficult to change. The Don't Repeat Yourself (DRY) principle states:
Every piece of knowledge must have a single, unambiguous, authoritative representation within a system.
When you violate DRY, bugs and maintenance problems are sure to follow. Duplicated code has a tendency to both continue to replicate and also to diverge (leaving bugs as two similar implementations differ in subtle ways).
Tuning
This issue has a mass of 30.
We set useful threshold defaults for the languages we support but you may want to adjust these settings based on your project guidelines.
The threshold configuration represents the minimum mass a code block must have to be analyzed for duplication. The lower the threshold, the more fine-grained the comparison.
If the engine is too easily reporting duplication, try raising the threshold. If you suspect that the engine isn't catching enough duplication, try lowering the threshold. The best setting tends to differ from language to language.
See codeclimate-duplication
's documentation for more information about tuning the mass threshold in your .codeclimate.yml
.
Refactorings
- Extract Method
- Extract Class
- Form Template Method
- Introduce Null Object
- Pull Up Method
- Pull Up Field
- Substitute Algorithm
Further Reading
- Don't Repeat Yourself on the C2 Wiki
- Duplicated Code on SourceMaking
- Refactoring: Improving the Design of Existing Code by Martin Fowler. Duplicated Code, p76
Avoid parameter lists longer than 5 parameters. [6/5] Open
def self.get_sorted_matching_objects(user, arclass, namespace, klass, name, enabled)
- Read upRead up
- Create a ticketCreate a ticket
- Exclude checks
Checks for methods with too many parameters.
The maximum number of parameters is configurable. Keyword arguments can optionally be excluded from the total count, as they add less complexity than positional or optional parameters.
Any number of arguments for initialize
method inside a block of
Struct.new
and Data.define
like this is always allowed:
Struct.new(:one, :two, :three, :four, :five, keyword_init: true) do
def initialize(one:, two:, three:, four:, five:)
end
end
This is because checking the number of arguments of the initialize
method
does not make sense.
NOTE: Explicit block argument &block
is not counted to prevent
erroneous change that is avoided by making block argument implicit.
Example: Max: 3
# good
def foo(a, b, c = 1)
end
Example: Max: 2
# bad
def foo(a, b, c = 1)
end
Example: CountKeywordArgs: true (default)
# counts keyword args towards the maximum
# bad (assuming Max is 3)
def foo(a, b, c, d: 1)
end
# good (assuming Max is 3)
def foo(a, b, c: 1)
end
Example: CountKeywordArgs: false
# don't count keyword args towards the maximum
# good (assuming Max is 3)
def foo(a, b, c, d: 1)
end
This cop also checks for the maximum number of optional parameters.
This can be configured using the MaxOptionalParameters
config option.
Example: MaxOptionalParameters: 3 (default)
# good
def foo(a = 1, b = 2, c = 3)
end
Example: MaxOptionalParameters: 2
# bad
def foo(a = 1, b = 2, c = 3)
end
Similar blocks of code found in 2 locations. Consider refactoring. Open
def orchestration_manager=(manager)
if manager && !manager.kind_of?(MiqAeMethodService::MiqAeServiceExtManagementSystem)
raise ArgumentError, "manager must be a MiqAeServiceExtManagementSystem or nil"
end
- Read upRead up
- Create a ticketCreate a ticket
Duplicated Code
Duplicated code can lead to software that is hard to understand and difficult to change. The Don't Repeat Yourself (DRY) principle states:
Every piece of knowledge must have a single, unambiguous, authoritative representation within a system.
When you violate DRY, bugs and maintenance problems are sure to follow. Duplicated code has a tendency to both continue to replicate and also to diverge (leaving bugs as two similar implementations differ in subtle ways).
Tuning
This issue has a mass of 30.
We set useful threshold defaults for the languages we support but you may want to adjust these settings based on your project guidelines.
The threshold configuration represents the minimum mass a code block must have to be analyzed for duplication. The lower the threshold, the more fine-grained the comparison.
If the engine is too easily reporting duplication, try raising the threshold. If you suspect that the engine isn't catching enough duplication, try lowering the threshold. The best setting tends to differ from language to language.
See codeclimate-duplication
's documentation for more information about tuning the mass threshold in your .codeclimate.yml
.
Refactorings
- Extract Method
- Extract Class
- Form Template Method
- Introduce Null Object
- Pull Up Method
- Pull Up Field
- Substitute Algorithm
Further Reading
- Don't Repeat Yourself on the C2 Wiki
- Duplicated Code on SourceMaking
- Refactoring: Improving the Design of Existing Code by Martin Fowler. Duplicated Code, p76
Avoid parameter lists longer than 5 parameters. [6/5] Open
def self.get_domain_index_object(domains, obj, klass, namespace, enabled, options)
- Read upRead up
- Create a ticketCreate a ticket
- Exclude checks
Checks for methods with too many parameters.
The maximum number of parameters is configurable. Keyword arguments can optionally be excluded from the total count, as they add less complexity than positional or optional parameters.
Any number of arguments for initialize
method inside a block of
Struct.new
and Data.define
like this is always allowed:
Struct.new(:one, :two, :three, :four, :five, keyword_init: true) do
def initialize(one:, two:, three:, four:, five:)
end
end
This is because checking the number of arguments of the initialize
method
does not make sense.
NOTE: Explicit block argument &block
is not counted to prevent
erroneous change that is avoided by making block argument implicit.
Example: Max: 3
# good
def foo(a, b, c = 1)
end
Example: Max: 2
# bad
def foo(a, b, c = 1)
end
Example: CountKeywordArgs: true (default)
# counts keyword args towards the maximum
# bad (assuming Max is 3)
def foo(a, b, c, d: 1)
end
# good (assuming Max is 3)
def foo(a, b, c: 1)
end
Example: CountKeywordArgs: false
# don't count keyword args towards the maximum
# good (assuming Max is 3)
def foo(a, b, c, d: 1)
end
This cop also checks for the maximum number of optional parameters.
This can be configured using the MaxOptionalParameters
config option.
Example: MaxOptionalParameters: 3 (default)
# good
def foo(a = 1, b = 2, c = 3)
end
Example: MaxOptionalParameters: 2
# bad
def foo(a = 1, b = 2, c = 3)
end
Method raise_ems_event
has a Cognitive Complexity of 12 (exceeds 11 allowed). Consider refactoring. Open
def self.raise_ems_event(event)
aevent = {
:event_id => event.id,
:event_stream_id => event.id,
:event_type => event.event_type,
- Read upRead up
- Create a ticketCreate a ticket
Cognitive Complexity
Cognitive Complexity is a measure of how difficult a unit of code is to intuitively understand. Unlike Cyclomatic Complexity, which determines how difficult your code will be to test, Cognitive Complexity tells you how difficult your code will be to read and comprehend.
A method's cognitive complexity is based on a few simple rules:
- Code is not considered more complex when it uses shorthand that the language provides for collapsing multiple statements into one
- Code is considered more complex for each "break in the linear flow of the code"
- Code is considered more complex when "flow breaking structures are nested"
Further reading
Method invoke_method
has a Cognitive Complexity of 12 (exceeds 11 allowed). Consider refactoring. Open
def invoke_method(namespace, klass, method_name, args)
aem = nil
# No class means an instance method
aem = @instance_methods[method_name.downcase] if klass.nil?
- Read upRead up
- Create a ticketCreate a ticket
Cognitive Complexity
Cognitive Complexity is a measure of how difficult a unit of code is to intuitively understand. Unlike Cyclomatic Complexity, which determines how difficult your code will be to test, Cognitive Complexity tells you how difficult your code will be to read and comprehend.
A method's cognitive complexity is based on a few simple rules:
- Code is not considered more complex when it uses shorthand that the language provides for collapsing multiple statements into one
- Code is considered more complex for each "break in the linear flow of the code"
- Code is considered more complex when "flow breaking structures are nested"
Further reading
Similar blocks of code found in 2 locations. Consider refactoring. Open
class MiqAeServiceManageIQ_Providers_AnsibleTower_AutomationManager_Job < MiqAeServiceManageIQ_Providers_Awx_AutomationManager_Job
expose :refresh_ems
expose :raw_stdout
def self.create_job(template, args = {})
- Read upRead up
- Create a ticketCreate a ticket
Duplicated Code
Duplicated code can lead to software that is hard to understand and difficult to change. The Don't Repeat Yourself (DRY) principle states:
Every piece of knowledge must have a single, unambiguous, authoritative representation within a system.
When you violate DRY, bugs and maintenance problems are sure to follow. Duplicated code has a tendency to both continue to replicate and also to diverge (leaving bugs as two similar implementations differ in subtle ways).
Tuning
This issue has a mass of 29.
We set useful threshold defaults for the languages we support but you may want to adjust these settings based on your project guidelines.
The threshold configuration represents the minimum mass a code block must have to be analyzed for duplication. The lower the threshold, the more fine-grained the comparison.
If the engine is too easily reporting duplication, try raising the threshold. If you suspect that the engine isn't catching enough duplication, try lowering the threshold. The best setting tends to differ from language to language.
See codeclimate-duplication
's documentation for more information about tuning the mass threshold in your .codeclimate.yml
.
Refactorings
- Extract Method
- Extract Class
- Form Template Method
- Introduce Null Object
- Pull Up Method
- Pull Up Field
- Substitute Algorithm
Further Reading
- Don't Repeat Yourself on the C2 Wiki
- Duplicated Code on SourceMaking
- Refactoring: Improving the Design of Existing Code by Martin Fowler. Duplicated Code, p76
Similar blocks of code found in 2 locations. Consider refactoring. Open
class MiqAeServiceManageIQ_Providers_Awx_AutomationManager_Job < MiqAeServiceManageIQ_Providers_ExternalAutomationManager_OrchestrationStack
expose :refresh_ems
expose :raw_stdout
def self.create_job(template, args = {})
- Read upRead up
- Create a ticketCreate a ticket
Duplicated Code
Duplicated code can lead to software that is hard to understand and difficult to change. The Don't Repeat Yourself (DRY) principle states:
Every piece of knowledge must have a single, unambiguous, authoritative representation within a system.
When you violate DRY, bugs and maintenance problems are sure to follow. Duplicated code has a tendency to both continue to replicate and also to diverge (leaving bugs as two similar implementations differ in subtle ways).
Tuning
This issue has a mass of 29.
We set useful threshold defaults for the languages we support but you may want to adjust these settings based on your project guidelines.
The threshold configuration represents the minimum mass a code block must have to be analyzed for duplication. The lower the threshold, the more fine-grained the comparison.
If the engine is too easily reporting duplication, try raising the threshold. If you suspect that the engine isn't catching enough duplication, try lowering the threshold. The best setting tends to differ from language to language.
See codeclimate-duplication
's documentation for more information about tuning the mass threshold in your .codeclimate.yml
.
Refactorings
- Extract Method
- Extract Class
- Form Template Method
- Introduce Null Object
- Pull Up Method
- Pull Up Field
- Substitute Algorithm
Further Reading
- Don't Repeat Yourself on the C2 Wiki
- Duplicated Code on SourceMaking
- Refactoring: Improving the Design of Existing Code by Martin Fowler. Duplicated Code, p76
Similar blocks of code found in 2 locations. Consider refactoring. Open
def retirement_warn=(days)
_log.info("Setting Retirement Warning on #{@object.class.name} id:<#{@object.id}>, name:<#{@object.name}> to #{days.inspect}")
ar_method { @object.update(:retirement_warn => days) }
- Read upRead up
- Create a ticketCreate a ticket
Duplicated Code
Duplicated code can lead to software that is hard to understand and difficult to change. The Don't Repeat Yourself (DRY) principle states:
Every piece of knowledge must have a single, unambiguous, authoritative representation within a system.
When you violate DRY, bugs and maintenance problems are sure to follow. Duplicated code has a tendency to both continue to replicate and also to diverge (leaving bugs as two similar implementations differ in subtle ways).
Tuning
This issue has a mass of 28.
We set useful threshold defaults for the languages we support but you may want to adjust these settings based on your project guidelines.
The threshold configuration represents the minimum mass a code block must have to be analyzed for duplication. The lower the threshold, the more fine-grained the comparison.
If the engine is too easily reporting duplication, try raising the threshold. If you suspect that the engine isn't catching enough duplication, try lowering the threshold. The best setting tends to differ from language to language.
See codeclimate-duplication
's documentation for more information about tuning the mass threshold in your .codeclimate.yml
.
Refactorings
- Extract Method
- Extract Class
- Form Template Method
- Introduce Null Object
- Pull Up Method
- Pull Up Field
- Substitute Algorithm
Further Reading
- Don't Repeat Yourself on the C2 Wiki
- Duplicated Code on SourceMaking
- Refactoring: Improving the Design of Existing Code by Martin Fowler. Duplicated Code, p76
Similar blocks of code found in 2 locations. Consider refactoring. Open
def retires_on=(date)
_log.info("Setting Retirement Date on #{@object.class.name} id:<#{@object.id}>, name:<#{@object.name}> to #{date.inspect}")
ar_method { @object.update(:retires_on => date) }
- Read upRead up
- Create a ticketCreate a ticket
Duplicated Code
Duplicated code can lead to software that is hard to understand and difficult to change. The Don't Repeat Yourself (DRY) principle states:
Every piece of knowledge must have a single, unambiguous, authoritative representation within a system.
When you violate DRY, bugs and maintenance problems are sure to follow. Duplicated code has a tendency to both continue to replicate and also to diverge (leaving bugs as two similar implementations differ in subtle ways).
Tuning
This issue has a mass of 28.
We set useful threshold defaults for the languages we support but you may want to adjust these settings based on your project guidelines.
The threshold configuration represents the minimum mass a code block must have to be analyzed for duplication. The lower the threshold, the more fine-grained the comparison.
If the engine is too easily reporting duplication, try raising the threshold. If you suspect that the engine isn't catching enough duplication, try lowering the threshold. The best setting tends to differ from language to language.
See codeclimate-duplication
's documentation for more information about tuning the mass threshold in your .codeclimate.yml
.
Refactorings
- Extract Method
- Extract Class
- Form Template Method
- Introduce Null Object
- Pull Up Method
- Pull Up Field
- Substitute Algorithm
Further Reading
- Don't Repeat Yourself on the C2 Wiki
- Duplicated Code on SourceMaking
- Refactoring: Improving the Design of Existing Code by Martin Fowler. Duplicated Code, p76
Similar blocks of code found in 6 locations. Consider refactoring. Open
def warn(progname = nil, resource_id: nil, &block)
severity, message, progname = add_to_db(WARN, nil, progname, resource_id: resource_id, &block)
add(severity, message, progname, &block)
- Read upRead up
- Create a ticketCreate a ticket
Duplicated Code
Duplicated code can lead to software that is hard to understand and difficult to change. The Don't Repeat Yourself (DRY) principle states:
Every piece of knowledge must have a single, unambiguous, authoritative representation within a system.
When you violate DRY, bugs and maintenance problems are sure to follow. Duplicated code has a tendency to both continue to replicate and also to diverge (leaving bugs as two similar implementations differ in subtle ways).
Tuning
This issue has a mass of 27.
We set useful threshold defaults for the languages we support but you may want to adjust these settings based on your project guidelines.
The threshold configuration represents the minimum mass a code block must have to be analyzed for duplication. The lower the threshold, the more fine-grained the comparison.
If the engine is too easily reporting duplication, try raising the threshold. If you suspect that the engine isn't catching enough duplication, try lowering the threshold. The best setting tends to differ from language to language.
See codeclimate-duplication
's documentation for more information about tuning the mass threshold in your .codeclimate.yml
.
Refactorings
- Extract Method
- Extract Class
- Form Template Method
- Introduce Null Object
- Pull Up Method
- Pull Up Field
- Substitute Algorithm
Further Reading
- Don't Repeat Yourself on the C2 Wiki
- Duplicated Code on SourceMaking
- Refactoring: Improving the Design of Existing Code by Martin Fowler. Duplicated Code, p76
Similar blocks of code found in 6 locations. Consider refactoring. Open
def info(progname = nil, resource_id: nil, &block)
severity, message, progname = add_to_db(INFO, nil, progname, resource_id: resource_id, &block)
add(severity, message, progname, &block)
- Read upRead up
- Create a ticketCreate a ticket
Duplicated Code
Duplicated code can lead to software that is hard to understand and difficult to change. The Don't Repeat Yourself (DRY) principle states:
Every piece of knowledge must have a single, unambiguous, authoritative representation within a system.
When you violate DRY, bugs and maintenance problems are sure to follow. Duplicated code has a tendency to both continue to replicate and also to diverge (leaving bugs as two similar implementations differ in subtle ways).
Tuning
This issue has a mass of 27.
We set useful threshold defaults for the languages we support but you may want to adjust these settings based on your project guidelines.
The threshold configuration represents the minimum mass a code block must have to be analyzed for duplication. The lower the threshold, the more fine-grained the comparison.
If the engine is too easily reporting duplication, try raising the threshold. If you suspect that the engine isn't catching enough duplication, try lowering the threshold. The best setting tends to differ from language to language.
See codeclimate-duplication
's documentation for more information about tuning the mass threshold in your .codeclimate.yml
.
Refactorings
- Extract Method
- Extract Class
- Form Template Method
- Introduce Null Object
- Pull Up Method
- Pull Up Field
- Substitute Algorithm
Further Reading
- Don't Repeat Yourself on the C2 Wiki
- Duplicated Code on SourceMaking
- Refactoring: Improving the Design of Existing Code by Martin Fowler. Duplicated Code, p76
Similar blocks of code found in 2 locations. Consider refactoring. Open
class MiqAeServiceManageIQ_Providers_AnsibleTower_AutomationManager_WorkflowJob < MiqAeServiceManageIQ_Providers_Awx_AutomationManager_WorkflowJob
expose :refresh_ems
def self.create_job(template, args = {})
template_object = ConfigurationScript.find_by(:id => template.id)
- Read upRead up
- Create a ticketCreate a ticket
Duplicated Code
Duplicated code can lead to software that is hard to understand and difficult to change. The Don't Repeat Yourself (DRY) principle states:
Every piece of knowledge must have a single, unambiguous, authoritative representation within a system.
When you violate DRY, bugs and maintenance problems are sure to follow. Duplicated code has a tendency to both continue to replicate and also to diverge (leaving bugs as two similar implementations differ in subtle ways).
Tuning
This issue has a mass of 27.
We set useful threshold defaults for the languages we support but you may want to adjust these settings based on your project guidelines.
The threshold configuration represents the minimum mass a code block must have to be analyzed for duplication. The lower the threshold, the more fine-grained the comparison.
If the engine is too easily reporting duplication, try raising the threshold. If you suspect that the engine isn't catching enough duplication, try lowering the threshold. The best setting tends to differ from language to language.
See codeclimate-duplication
's documentation for more information about tuning the mass threshold in your .codeclimate.yml
.
Refactorings
- Extract Method
- Extract Class
- Form Template Method
- Introduce Null Object
- Pull Up Method
- Pull Up Field
- Substitute Algorithm
Further Reading
- Don't Repeat Yourself on the C2 Wiki
- Duplicated Code on SourceMaking
- Refactoring: Improving the Design of Existing Code by Martin Fowler. Duplicated Code, p76
Similar blocks of code found in 6 locations. Consider refactoring. Open
def debug(progname = nil, resource_id: nil, &block)
severity, message, progname = add_to_db(DEBUG, nil, progname, resource_id: resource_id, &block)
add(severity, message, progname, &block)
- Read upRead up
- Create a ticketCreate a ticket
Duplicated Code
Duplicated code can lead to software that is hard to understand and difficult to change. The Don't Repeat Yourself (DRY) principle states:
Every piece of knowledge must have a single, unambiguous, authoritative representation within a system.
When you violate DRY, bugs and maintenance problems are sure to follow. Duplicated code has a tendency to both continue to replicate and also to diverge (leaving bugs as two similar implementations differ in subtle ways).
Tuning
This issue has a mass of 27.
We set useful threshold defaults for the languages we support but you may want to adjust these settings based on your project guidelines.
The threshold configuration represents the minimum mass a code block must have to be analyzed for duplication. The lower the threshold, the more fine-grained the comparison.
If the engine is too easily reporting duplication, try raising the threshold. If you suspect that the engine isn't catching enough duplication, try lowering the threshold. The best setting tends to differ from language to language.
See codeclimate-duplication
's documentation for more information about tuning the mass threshold in your .codeclimate.yml
.
Refactorings
- Extract Method
- Extract Class
- Form Template Method
- Introduce Null Object
- Pull Up Method
- Pull Up Field
- Substitute Algorithm
Further Reading
- Don't Repeat Yourself on the C2 Wiki
- Duplicated Code on SourceMaking
- Refactoring: Improving the Design of Existing Code by Martin Fowler. Duplicated Code, p76