Sign upLogin

ManageIQ/manageiq

View on GitHub
Star

Showing 1,311 of 1,311 total issues

Similar blocks of code found in 7 locations. Consider refactoring.
Open

  def self.create_storage_service(ems_id, options = {})
    raise ArgumentError, _("ems_id cannot be nil") if ems_id.nil?

    ext_management_system = ExtManagementSystem.find_by(:id => ems_id)
    raise ArgumentError, _("ext_management_system cannot be found") if ext_management_system.nil?
Severity: Major
Found in app/models/storage_service.rb and 6 other locations - About 30 mins to fix
app/models/host_initiator.rb on lines 47..54
app/models/host_initiator_group.rb on lines 47..54
app/models/physical_storage.rb on lines 73..80
app/models/physical_storage.rb on lines 121..128
app/models/storage_service.rb on lines 108..115
app/models/volume_mapping.rb on lines 72..79

Duplicated Code

Duplicated code can lead to software that is hard to understand and difficult to change. The Don't Repeat Yourself (DRY) principle states:

Every piece of knowledge must have a single, unambiguous, authoritative representation within a system.

When you violate DRY, bugs and maintenance problems are sure to follow. Duplicated code has a tendency to both continue to replicate and also to diverge (leaving bugs as two similar implementations differ in subtle ways).

Tuning

This issue has a mass of 33.

We set useful threshold defaults for the languages we support but you may want to adjust these settings based on your project guidelines.

The threshold configuration represents the minimum mass a code block must have to be analyzed for duplication. The lower the threshold, the more fine-grained the comparison.

If the engine is too easily reporting duplication, try raising the threshold. If you suspect that the engine isn't catching enough duplication, try lowering the threshold. The best setting tends to differ from language to language.

See codeclimate-duplication's documentation for more information about tuning the mass threshold in your .codeclimate.yml.

Refactorings

Further Reading

Similar blocks of code found in 2 locations. Consider refactoring.
Open

  def self.classify_by_tag(obj, tag, is_request = true)
    parts = tag.split("/")
    raise _("Tag %{tag} is not a category entry") % {:tag => tag} unless parts[1] == "managed"

    entry_name = parts.pop
Severity: Minor
Found in app/models/classification.rb and 1 other location - About 30 mins to fix
app/models/classification.rb on lines 130..137

Duplicated Code

Duplicated code can lead to software that is hard to understand and difficult to change. The Don't Repeat Yourself (DRY) principle states:

Every piece of knowledge must have a single, unambiguous, authoritative representation within a system.

When you violate DRY, bugs and maintenance problems are sure to follow. Duplicated code has a tendency to both continue to replicate and also to diverge (leaving bugs as two similar implementations differ in subtle ways).

Tuning

This issue has a mass of 33.

We set useful threshold defaults for the languages we support but you may want to adjust these settings based on your project guidelines.

The threshold configuration represents the minimum mass a code block must have to be analyzed for duplication. The lower the threshold, the more fine-grained the comparison.

If the engine is too easily reporting duplication, try raising the threshold. If you suspect that the engine isn't catching enough duplication, try lowering the threshold. The best setting tends to differ from language to language.

See codeclimate-duplication's documentation for more information about tuning the mass threshold in your .codeclimate.yml.

Refactorings

Further Reading

Similar blocks of code found in 2 locations. Consider refactoring.
Open

        info = worktree.branch_info(branch)
        attrs = {:name           => branch,
                 :commit_sha     => info[:commit_sha],
                 :commit_time    => info[:time],
                 :commit_message => info[:message]}
Severity: Minor
Found in app/models/git_repository.rb and 1 other location - About 30 mins to fix
app/models/git_repository.rb on lines 179..187

Duplicated Code

Duplicated code can lead to software that is hard to understand and difficult to change. The Don't Repeat Yourself (DRY) principle states:

Every piece of knowledge must have a single, unambiguous, authoritative representation within a system.

When you violate DRY, bugs and maintenance problems are sure to follow. Duplicated code has a tendency to both continue to replicate and also to diverge (leaving bugs as two similar implementations differ in subtle ways).

Tuning

This issue has a mass of 33.

We set useful threshold defaults for the languages we support but you may want to adjust these settings based on your project guidelines.

The threshold configuration represents the minimum mass a code block must have to be analyzed for duplication. The lower the threshold, the more fine-grained the comparison.

If the engine is too easily reporting duplication, try raising the threshold. If you suspect that the engine isn't catching enough duplication, try lowering the threshold. The best setting tends to differ from language to language.

See codeclimate-duplication's documentation for more information about tuning the mass threshold in your .codeclimate.yml.

Refactorings

Further Reading

Similar blocks of code found in 5 locations. Consider refactoring.
Open

  def add_security_group_queue(userid, security_group)
    task_opts = {
      :action => "adding Security Group to Instance for user #{userid}",
      :userid => userid
    }
Severity: Major
Found in app/models/manageiq/providers/cloud_manager/vm.rb and 4 other locations - About 30 mins to fix
app/models/manageiq/providers/cloud_manager/vm.rb on lines 136..152
app/models/manageiq/providers/cloud_manager/vm.rb on lines 167..183
app/models/manageiq/providers/cloud_manager/vm.rb on lines 229..245
app/models/vm_or_template/operations/relocation.rb on lines 20..36

Duplicated Code

Duplicated code can lead to software that is hard to understand and difficult to change. The Don't Repeat Yourself (DRY) principle states:

Every piece of knowledge must have a single, unambiguous, authoritative representation within a system.

When you violate DRY, bugs and maintenance problems are sure to follow. Duplicated code has a tendency to both continue to replicate and also to diverge (leaving bugs as two similar implementations differ in subtle ways).

Tuning

This issue has a mass of 33.

We set useful threshold defaults for the languages we support but you may want to adjust these settings based on your project guidelines.

The threshold configuration represents the minimum mass a code block must have to be analyzed for duplication. The lower the threshold, the more fine-grained the comparison.

If the engine is too easily reporting duplication, try raising the threshold. If you suspect that the engine isn't catching enough duplication, try lowering the threshold. The best setting tends to differ from language to language.

See codeclimate-duplication's documentation for more information about tuning the mass threshold in your .codeclimate.yml.

Refactorings

Further Reading

Identical blocks of code found in 2 locations. Consider refactoring.
Open

  def self.create_catalog_item(options, _auth_user = nil)
    transaction do
      create_from_options(options).tap do |service_template|
        config_info = validate_config_info(options)
Severity: Minor
Found in app/models/service_template_ansible_tower.rb and 1 other location - About 30 mins to fix
app/models/service_template_awx.rb on lines 9..20

Duplicated Code

Duplicated code can lead to software that is hard to understand and difficult to change. The Don't Repeat Yourself (DRY) principle states:

Every piece of knowledge must have a single, unambiguous, authoritative representation within a system.

When you violate DRY, bugs and maintenance problems are sure to follow. Duplicated code has a tendency to both continue to replicate and also to diverge (leaving bugs as two similar implementations differ in subtle ways).

Tuning

This issue has a mass of 33.

We set useful threshold defaults for the languages we support but you may want to adjust these settings based on your project guidelines.

The threshold configuration represents the minimum mass a code block must have to be analyzed for duplication. The lower the threshold, the more fine-grained the comparison.

If the engine is too easily reporting duplication, try raising the threshold. If you suspect that the engine isn't catching enough duplication, try lowering the threshold. The best setting tends to differ from language to language.

See codeclimate-duplication's documentation for more information about tuning the mass threshold in your .codeclimate.yml.

Refactorings

Further Reading

Similar blocks of code found in 7 locations. Consider refactoring.
Open

  def self.create_volume_mapping(ems_id, options = {})
    raise ArgumentError, _("ems_id cannot be nil") if ems_id.nil?

    ext_management_system = ExtManagementSystem.find_by(:id => ems_id)
    raise ArgumentError, _("ext_management_system cannot be found") if ext_management_system.nil?
Severity: Major
Found in app/models/volume_mapping.rb and 6 other locations - About 30 mins to fix
app/models/host_initiator.rb on lines 47..54
app/models/host_initiator_group.rb on lines 47..54
app/models/physical_storage.rb on lines 73..80
app/models/physical_storage.rb on lines 121..128
app/models/storage_service.rb on lines 38..45
app/models/storage_service.rb on lines 108..115

Duplicated Code

Duplicated code can lead to software that is hard to understand and difficult to change. The Don't Repeat Yourself (DRY) principle states:

Every piece of knowledge must have a single, unambiguous, authoritative representation within a system.

When you violate DRY, bugs and maintenance problems are sure to follow. Duplicated code has a tendency to both continue to replicate and also to diverge (leaving bugs as two similar implementations differ in subtle ways).

Tuning

This issue has a mass of 33.

We set useful threshold defaults for the languages we support but you may want to adjust these settings based on your project guidelines.

The threshold configuration represents the minimum mass a code block must have to be analyzed for duplication. The lower the threshold, the more fine-grained the comparison.

If the engine is too easily reporting duplication, try raising the threshold. If you suspect that the engine isn't catching enough duplication, try lowering the threshold. The best setting tends to differ from language to language.

See codeclimate-duplication's documentation for more information about tuning the mass threshold in your .codeclimate.yml.

Refactorings

Further Reading

Similar blocks of code found in 5 locations. Consider refactoring.
Open

  def disassociate_floating_ip_queue(userid, ip_address)
    task_opts = {
      :action => "disassociating floating IP with Instance for user #{userid}",
      :userid => userid
    }
Severity: Major
Found in app/models/manageiq/providers/cloud_manager/vm.rb and 4 other locations - About 30 mins to fix
app/models/manageiq/providers/cloud_manager/vm.rb on lines 136..152
app/models/manageiq/providers/cloud_manager/vm.rb on lines 198..214
app/models/manageiq/providers/cloud_manager/vm.rb on lines 229..245
app/models/vm_or_template/operations/relocation.rb on lines 20..36

Duplicated Code

Duplicated code can lead to software that is hard to understand and difficult to change. The Don't Repeat Yourself (DRY) principle states:

Every piece of knowledge must have a single, unambiguous, authoritative representation within a system.

When you violate DRY, bugs and maintenance problems are sure to follow. Duplicated code has a tendency to both continue to replicate and also to diverge (leaving bugs as two similar implementations differ in subtle ways).

Tuning

This issue has a mass of 33.

We set useful threshold defaults for the languages we support but you may want to adjust these settings based on your project guidelines.

The threshold configuration represents the minimum mass a code block must have to be analyzed for duplication. The lower the threshold, the more fine-grained the comparison.

If the engine is too easily reporting duplication, try raising the threshold. If you suspect that the engine isn't catching enough duplication, try lowering the threshold. The best setting tends to differ from language to language.

See codeclimate-duplication's documentation for more information about tuning the mass threshold in your .codeclimate.yml.

Refactorings

Further Reading

Similar blocks of code found in 2 locations. Consider refactoring.
Open

opts = Optimist.options do
  opt :ems_id, "The ID of the ExtManagementSystem to reconnect VMs for", :type => :integer
  opt :ems_name, "The name of the ExtManagementSystem to reconnect VMs for", :type => :string
  opt :by, "Property to treat as unique, defaults to :uid_ems", :type => :string, :default => "uid_ems"
  opt :dry_run, "Just print out what would be done without modifying anything", :type => :boolean, :default => true
Severity: Minor
Found in tools/reconnect_vms.rb and 1 other location - About 30 mins to fix
tools/reconnect_hosts.rb on lines 5..10

Duplicated Code

Duplicated code can lead to software that is hard to understand and difficult to change. The Don't Repeat Yourself (DRY) principle states:

Every piece of knowledge must have a single, unambiguous, authoritative representation within a system.

When you violate DRY, bugs and maintenance problems are sure to follow. Duplicated code has a tendency to both continue to replicate and also to diverge (leaving bugs as two similar implementations differ in subtle ways).

Tuning

This issue has a mass of 33.

We set useful threshold defaults for the languages we support but you may want to adjust these settings based on your project guidelines.

The threshold configuration represents the minimum mass a code block must have to be analyzed for duplication. The lower the threshold, the more fine-grained the comparison.

If the engine is too easily reporting duplication, try raising the threshold. If you suspect that the engine isn't catching enough duplication, try lowering the threshold. The best setting tends to differ from language to language.

See codeclimate-duplication's documentation for more information about tuning the mass threshold in your .codeclimate.yml.

Refactorings

Further Reading

Identical blocks of code found in 2 locations. Consider refactoring.
Open

  def mark_pending_items_as_finished
    miq_request.miq_request_tasks.each do |s|
      if s.state == 'pending'
        s.update_and_notify_parent(:state => "finished", :status => "Warn", :message => "Error in Request: #{miq_request.id}. Setting pending Task: #{id} to finished.") unless id == s.id
Severity: Minor
Found in app/models/miq_retire_task.rb and 1 other location - About 30 mins to fix
app/models/service_template_provision_task.rb on lines 182..185

Duplicated Code

Duplicated code can lead to software that is hard to understand and difficult to change. The Don't Repeat Yourself (DRY) principle states:

Every piece of knowledge must have a single, unambiguous, authoritative representation within a system.

When you violate DRY, bugs and maintenance problems are sure to follow. Duplicated code has a tendency to both continue to replicate and also to diverge (leaving bugs as two similar implementations differ in subtle ways).

Tuning

This issue has a mass of 33.

We set useful threshold defaults for the languages we support but you may want to adjust these settings based on your project guidelines.

The threshold configuration represents the minimum mass a code block must have to be analyzed for duplication. The lower the threshold, the more fine-grained the comparison.

If the engine is too easily reporting duplication, try raising the threshold. If you suspect that the engine isn't catching enough duplication, try lowering the threshold. The best setting tends to differ from language to language.

See codeclimate-duplication's documentation for more information about tuning the mass threshold in your .codeclimate.yml.

Refactorings

Further Reading

Similar blocks of code found in 7 locations. Consider refactoring.
Open

  def self.create_host_initiator(ems_id, options = {})
    raise ArgumentError, _("ems_id cannot be nil") if ems_id.nil?

    ext_management_system = ExtManagementSystem.find_by(:id => ems_id)
    raise ArgumentError, _("ext_management_system cannot be found") if ext_management_system.nil?
Severity: Major
Found in app/models/host_initiator.rb and 6 other locations - About 30 mins to fix
app/models/host_initiator_group.rb on lines 47..54
app/models/physical_storage.rb on lines 73..80
app/models/physical_storage.rb on lines 121..128
app/models/storage_service.rb on lines 38..45
app/models/storage_service.rb on lines 108..115
app/models/volume_mapping.rb on lines 72..79

Duplicated Code

Duplicated code can lead to software that is hard to understand and difficult to change. The Don't Repeat Yourself (DRY) principle states:

Every piece of knowledge must have a single, unambiguous, authoritative representation within a system.

When you violate DRY, bugs and maintenance problems are sure to follow. Duplicated code has a tendency to both continue to replicate and also to diverge (leaving bugs as two similar implementations differ in subtle ways).

Tuning

This issue has a mass of 33.

We set useful threshold defaults for the languages we support but you may want to adjust these settings based on your project guidelines.

The threshold configuration represents the minimum mass a code block must have to be analyzed for duplication. The lower the threshold, the more fine-grained the comparison.

If the engine is too easily reporting duplication, try raising the threshold. If you suspect that the engine isn't catching enough duplication, try lowering the threshold. The best setting tends to differ from language to language.

See codeclimate-duplication's documentation for more information about tuning the mass threshold in your .codeclimate.yml.

Refactorings

Further Reading

Similar blocks of code found in 5 locations. Consider refactoring.
Open

  def associate_floating_ip_queue(userid, ip_address)
    task_opts = {
      :action => "associating floating IP with Instance for user #{userid}",
      :userid => userid
    }
Severity: Major
Found in app/models/manageiq/providers/cloud_manager/vm.rb and 4 other locations - About 30 mins to fix
app/models/manageiq/providers/cloud_manager/vm.rb on lines 167..183
app/models/manageiq/providers/cloud_manager/vm.rb on lines 198..214
app/models/manageiq/providers/cloud_manager/vm.rb on lines 229..245
app/models/vm_or_template/operations/relocation.rb on lines 20..36

Duplicated Code

Duplicated code can lead to software that is hard to understand and difficult to change. The Don't Repeat Yourself (DRY) principle states:

Every piece of knowledge must have a single, unambiguous, authoritative representation within a system.

When you violate DRY, bugs and maintenance problems are sure to follow. Duplicated code has a tendency to both continue to replicate and also to diverge (leaving bugs as two similar implementations differ in subtle ways).

Tuning

This issue has a mass of 33.

We set useful threshold defaults for the languages we support but you may want to adjust these settings based on your project guidelines.

The threshold configuration represents the minimum mass a code block must have to be analyzed for duplication. The lower the threshold, the more fine-grained the comparison.

If the engine is too easily reporting duplication, try raising the threshold. If you suspect that the engine isn't catching enough duplication, try lowering the threshold. The best setting tends to differ from language to language.

See codeclimate-duplication's documentation for more information about tuning the mass threshold in your .codeclimate.yml.

Refactorings

Further Reading

Similar blocks of code found in 2 locations. Consider refactoring.
Open

  def self.unclassify_by_tag(obj, tag, is_request = true)
    parts = tag.split("/")
    raise _("Tag %{tag} is not a category entry") % {:tag => tag} unless parts[1] == "managed"

    entry_name = parts.pop
Severity: Minor
Found in app/models/classification.rb and 1 other location - About 30 mins to fix
app/models/classification.rb on lines 120..127

Duplicated Code

Duplicated code can lead to software that is hard to understand and difficult to change. The Don't Repeat Yourself (DRY) principle states:

Every piece of knowledge must have a single, unambiguous, authoritative representation within a system.

When you violate DRY, bugs and maintenance problems are sure to follow. Duplicated code has a tendency to both continue to replicate and also to diverge (leaving bugs as two similar implementations differ in subtle ways).

Tuning

This issue has a mass of 33.

We set useful threshold defaults for the languages we support but you may want to adjust these settings based on your project guidelines.

The threshold configuration represents the minimum mass a code block must have to be analyzed for duplication. The lower the threshold, the more fine-grained the comparison.

If the engine is too easily reporting duplication, try raising the threshold. If you suspect that the engine isn't catching enough duplication, try lowering the threshold. The best setting tends to differ from language to language.

See codeclimate-duplication's documentation for more information about tuning the mass threshold in your .codeclimate.yml.

Refactorings

Further Reading

Similar blocks of code found in 2 locations. Consider refactoring.
Open

        info = worktree.tag_info(tag)
        attrs = {:name           => tag,
                 :commit_sha     => info[:commit_sha],
                 :commit_time    => info[:time],
                 :commit_message => info[:message]}
Severity: Minor
Found in app/models/git_repository.rb and 1 other location - About 30 mins to fix
app/models/git_repository.rb on lines 162..170

Duplicated Code

Duplicated code can lead to software that is hard to understand and difficult to change. The Don't Repeat Yourself (DRY) principle states:

Every piece of knowledge must have a single, unambiguous, authoritative representation within a system.

When you violate DRY, bugs and maintenance problems are sure to follow. Duplicated code has a tendency to both continue to replicate and also to diverge (leaving bugs as two similar implementations differ in subtle ways).

Tuning

This issue has a mass of 33.

We set useful threshold defaults for the languages we support but you may want to adjust these settings based on your project guidelines.

The threshold configuration represents the minimum mass a code block must have to be analyzed for duplication. The lower the threshold, the more fine-grained the comparison.

If the engine is too easily reporting duplication, try raising the threshold. If you suspect that the engine isn't catching enough duplication, try lowering the threshold. The best setting tends to differ from language to language.

See codeclimate-duplication's documentation for more information about tuning the mass threshold in your .codeclimate.yml.

Refactorings

Further Reading

Similar blocks of code found in 2 locations. Consider refactoring.
Open

opts = Optimist.options do
  opt :ems_id, "The ID of the ExtManagementSystem to reconnect Hosts for", :type => :integer
  opt :ems_name, "The name of the ExtManagementSystem to reconnect Hosts for", :type => :string
  opt :by, "Property to treat as unique, defaults to :hostname", :type => :string, :default => "hostname"
  opt :dry_run, "Just print out what would be done without modifying anything", :type => :boolean, :default => true
Severity: Minor
Found in tools/reconnect_hosts.rb and 1 other location - About 30 mins to fix
tools/reconnect_vms.rb on lines 5..10

Duplicated Code

Duplicated code can lead to software that is hard to understand and difficult to change. The Don't Repeat Yourself (DRY) principle states:

Every piece of knowledge must have a single, unambiguous, authoritative representation within a system.

When you violate DRY, bugs and maintenance problems are sure to follow. Duplicated code has a tendency to both continue to replicate and also to diverge (leaving bugs as two similar implementations differ in subtle ways).

Tuning

This issue has a mass of 33.

We set useful threshold defaults for the languages we support but you may want to adjust these settings based on your project guidelines.

The threshold configuration represents the minimum mass a code block must have to be analyzed for duplication. The lower the threshold, the more fine-grained the comparison.

If the engine is too easily reporting duplication, try raising the threshold. If you suspect that the engine isn't catching enough duplication, try lowering the threshold. The best setting tends to differ from language to language.

See codeclimate-duplication's documentation for more information about tuning the mass threshold in your .codeclimate.yml.

Refactorings

Further Reading

Avoid parameter lists longer than 5 parameters. [7/5]
Open

  def queue_signal(*args, priority: MiqQueue::NORMAL_PRIORITY, role: nil, deliver_on: nil, server_guid: nil, queue_name: nil, msg_timeout: nil)
Severity: Minor
Found in app/models/job/state_machine.rb by rubocop

Checks for methods with too many parameters.

The maximum number of parameters is configurable. Keyword arguments can optionally be excluded from the total count, as they add less complexity than positional or optional parameters.

Any number of arguments for initialize method inside a block of Struct.new and Data.define like this is always allowed:

Struct.new(:one, :two, :three, :four, :five, keyword_init: true) do
  def initialize(one:, two:, three:, four:, five:)
  end
end

This is because checking the number of arguments of the initialize method does not make sense.

NOTE: Explicit block argument &block is not counted to prevent erroneous change that is avoided by making block argument implicit.

Example: Max: 3

# good
def foo(a, b, c = 1)
end

Example: Max: 2

# bad
def foo(a, b, c = 1)
end

Example: CountKeywordArgs: true (default)

# counts keyword args towards the maximum

# bad (assuming Max is 3)
def foo(a, b, c, d: 1)
end

# good (assuming Max is 3)
def foo(a, b, c: 1)
end

Example: CountKeywordArgs: false

# don't count keyword args towards the maximum

# good (assuming Max is 3)
def foo(a, b, c, d: 1)
end

This cop also checks for the maximum number of optional parameters. This can be configured using the MaxOptionalParameters config option.

Example: MaxOptionalParameters: 3 (default)

# good
def foo(a = 1, b = 2, c = 3)
end

Example: MaxOptionalParameters: 2

# bad
def foo(a = 1, b = 2, c = 3)
end

Avoid parameter lists longer than 5 parameters. [7/5]
Open

  def save_inventory_multi(association, hashes, deletes, find_key, child_keys = [], extra_keys = [], disconnect = false)
Severity: Minor
Found in app/models/ems_refresh/save_inventory_helper.rb by rubocop

Checks for methods with too many parameters.

The maximum number of parameters is configurable. Keyword arguments can optionally be excluded from the total count, as they add less complexity than positional or optional parameters.

Any number of arguments for initialize method inside a block of Struct.new and Data.define like this is always allowed:

Struct.new(:one, :two, :three, :four, :five, keyword_init: true) do
  def initialize(one:, two:, three:, four:, five:)
  end
end

This is because checking the number of arguments of the initialize method does not make sense.

NOTE: Explicit block argument &block is not counted to prevent erroneous change that is avoided by making block argument implicit.

Example: Max: 3

# good
def foo(a, b, c = 1)
end

Example: Max: 2

# bad
def foo(a, b, c = 1)
end

Example: CountKeywordArgs: true (default)

# counts keyword args towards the maximum

# bad (assuming Max is 3)
def foo(a, b, c, d: 1)
end

# good (assuming Max is 3)
def foo(a, b, c: 1)
end

Example: CountKeywordArgs: false

# don't count keyword args towards the maximum

# good (assuming Max is 3)
def foo(a, b, c, d: 1)
end

This cop also checks for the maximum number of optional parameters. This can be configured using the MaxOptionalParameters config option.

Example: MaxOptionalParameters: 3 (default)

# good
def foo(a = 1, b = 2, c = 3)
end

Example: MaxOptionalParameters: 2

# bad
def foo(a = 1, b = 2, c = 3)
end

Avoid parameter lists longer than 5 parameters. [7/5]
Open

  def self.with_remote_connection(host, port, username, password, database, adapter, connect_timeout = 0)
Severity: Minor
Found in app/models/miq_region_remote.rb by rubocop

Checks for methods with too many parameters.

The maximum number of parameters is configurable. Keyword arguments can optionally be excluded from the total count, as they add less complexity than positional or optional parameters.

Any number of arguments for initialize method inside a block of Struct.new and Data.define like this is always allowed:

Struct.new(:one, :two, :three, :four, :five, keyword_init: true) do
  def initialize(one:, two:, three:, four:, five:)
  end
end

This is because checking the number of arguments of the initialize method does not make sense.

NOTE: Explicit block argument &block is not counted to prevent erroneous change that is avoided by making block argument implicit.

Example: Max: 3

# good
def foo(a, b, c = 1)
end

Example: Max: 2

# bad
def foo(a, b, c = 1)
end

Example: CountKeywordArgs: true (default)

# counts keyword args towards the maximum

# bad (assuming Max is 3)
def foo(a, b, c, d: 1)
end

# good (assuming Max is 3)
def foo(a, b, c: 1)
end

Example: CountKeywordArgs: false

# don't count keyword args towards the maximum

# good (assuming Max is 3)
def foo(a, b, c, d: 1)
end

This cop also checks for the maximum number of optional parameters. This can be configured using the MaxOptionalParameters config option.

Example: MaxOptionalParameters: 3 (default)

# good
def foo(a = 1, b = 2, c = 3)
end

Example: MaxOptionalParameters: 2

# bad
def foo(a = 1, b = 2, c = 3)
end

Avoid parameter lists longer than 5 parameters. [7/5]
Open

  def self.from_ws_ver_1_0(version, user, src_name, target_name, auto_approve, tags, additional_values)
Severity: Minor
Found in app/models/miq_provision_virt_workflow.rb by rubocop

Checks for methods with too many parameters.

The maximum number of parameters is configurable. Keyword arguments can optionally be excluded from the total count, as they add less complexity than positional or optional parameters.

Any number of arguments for initialize method inside a block of Struct.new and Data.define like this is always allowed:

Struct.new(:one, :two, :three, :four, :five, keyword_init: true) do
  def initialize(one:, two:, three:, four:, five:)
  end
end

This is because checking the number of arguments of the initialize method does not make sense.

NOTE: Explicit block argument &block is not counted to prevent erroneous change that is avoided by making block argument implicit.

Example: Max: 3

# good
def foo(a, b, c = 1)
end

Example: Max: 2

# bad
def foo(a, b, c = 1)
end

Example: CountKeywordArgs: true (default)

# counts keyword args towards the maximum

# bad (assuming Max is 3)
def foo(a, b, c, d: 1)
end

# good (assuming Max is 3)
def foo(a, b, c: 1)
end

Example: CountKeywordArgs: false

# don't count keyword args towards the maximum

# good (assuming Max is 3)
def foo(a, b, c, d: 1)
end

This cop also checks for the maximum number of optional parameters. This can be configured using the MaxOptionalParameters config option.

Example: MaxOptionalParameters: 3 (default)

# good
def foo(a = 1, b = 2, c = 3)
end

Example: MaxOptionalParameters: 2

# bad
def foo(a = 1, b = 2, c = 3)
end

Avoid parameter lists longer than 5 parameters. [7/5]
Open

  def self.from_ws_ver_1_x(version, user, template_fields, vm_fields, requester, tags, options)
Severity: Minor
Found in app/models/miq_provision_virt_workflow.rb by rubocop

Checks for methods with too many parameters.

The maximum number of parameters is configurable. Keyword arguments can optionally be excluded from the total count, as they add less complexity than positional or optional parameters.

Any number of arguments for initialize method inside a block of Struct.new and Data.define like this is always allowed:

Struct.new(:one, :two, :three, :four, :five, keyword_init: true) do
  def initialize(one:, two:, three:, four:, five:)
  end
end

This is because checking the number of arguments of the initialize method does not make sense.

NOTE: Explicit block argument &block is not counted to prevent erroneous change that is avoided by making block argument implicit.

Example: Max: 3

# good
def foo(a, b, c = 1)
end

Example: Max: 2

# bad
def foo(a, b, c = 1)
end

Example: CountKeywordArgs: true (default)

# counts keyword args towards the maximum

# bad (assuming Max is 3)
def foo(a, b, c, d: 1)
end

# good (assuming Max is 3)
def foo(a, b, c: 1)
end

Example: CountKeywordArgs: false

# don't count keyword args towards the maximum

# good (assuming Max is 3)
def foo(a, b, c, d: 1)
end

This cop also checks for the maximum number of optional parameters. This can be configured using the MaxOptionalParameters config option.

Example: MaxOptionalParameters: 3 (default)

# good
def foo(a = 1, b = 2, c = 3)
end

Example: MaxOptionalParameters: 2

# bad
def foo(a = 1, b = 2, c = 3)
end

Avoid parameter lists longer than 5 parameters. [7/5]
Open

  def set_ws_field_value_by_id_or_name(values, dlg_field, data, dialog_name, dlg_fields, data_key = nil, id_klass = nil)
Severity: Minor
Found in app/models/miq_request_workflow.rb by rubocop

Checks for methods with too many parameters.

The maximum number of parameters is configurable. Keyword arguments can optionally be excluded from the total count, as they add less complexity than positional or optional parameters.

Any number of arguments for initialize method inside a block of Struct.new and Data.define like this is always allowed:

Struct.new(:one, :two, :three, :four, :five, keyword_init: true) do
  def initialize(one:, two:, three:, four:, five:)
  end
end

This is because checking the number of arguments of the initialize method does not make sense.

NOTE: Explicit block argument &block is not counted to prevent erroneous change that is avoided by making block argument implicit.

Example: Max: 3

# good
def foo(a, b, c = 1)
end

Example: Max: 2

# bad
def foo(a, b, c = 1)
end

Example: CountKeywordArgs: true (default)

# counts keyword args towards the maximum

# bad (assuming Max is 3)
def foo(a, b, c, d: 1)
end

# good (assuming Max is 3)
def foo(a, b, c: 1)
end

Example: CountKeywordArgs: false

# don't count keyword args towards the maximum

# good (assuming Max is 3)
def foo(a, b, c, d: 1)
end

This cop also checks for the maximum number of optional parameters. This can be configured using the MaxOptionalParameters config option.

Example: MaxOptionalParameters: 3 (default)

# good
def foo(a = 1, b = 2, c = 3)
end

Example: MaxOptionalParameters: 2

# bad
def foo(a = 1, b = 2, c = 3)
end
Severity
Category
Status
Source
Language