Function find_control_flow
has a Cognitive Complexity of 31 (exceeds 5 allowed). Consider refactoring. Open
def find_control_flow(self):
# find all jump targets
jump_targets = list(set(self.jump_targets()))
- Read upRead up
Cognitive Complexity
Cognitive Complexity is a measure of how difficult a unit of code is to intuitively understand. Unlike Cyclomatic Complexity, which determines how difficult your code will be to test, Cognitive Complexity tells you how difficult your code will be to read and comprehend.
A method's cognitive complexity is based on a few simple rules:
- Code is not considered more complex when it uses shorthand that the language provides for collapsing multiple statements into one
- Code is considered more complex for each "break in the linear flow of the code"
- Code is considered more complex when "flow breaking structures are nested"
Further reading
Cyclomatic complexity is too high in method find_control_flow. (12) Open
def find_control_flow(self):
# find all jump targets
jump_targets = list(set(self.jump_targets()))
- Read upRead up
- Exclude checks
Cyclomatic Complexity
Cyclomatic Complexity corresponds to the number of decisions a block of code contains plus 1. This number (also called McCabe number) is equal to the number of linearly independent paths through the code. This number can be used as a guide when testing conditional logic in blocks.
Radon analyzes the AST tree of a Python program to compute Cyclomatic Complexity. Statements have the following effects on Cyclomatic Complexity:
Construct | Effect on CC | Reasoning |
---|---|---|
if | +1 | An if statement is a single decision. |
elif | +1 | The elif statement adds another decision. |
else | +0 | The else statement does not cause a new decision. The decision is at the if. |
for | +1 | There is a decision at the start of the loop. |
while | +1 | There is a decision at the while statement. |
except | +1 | Each except branch adds a new conditional path of execution. |
finally | +0 | The finally block is unconditionally executed. |
with | +1 | The with statement roughly corresponds to a try/except block (see PEP 343 for details). |
assert | +1 | The assert statement internally roughly equals a conditional statement. |
Comprehension | +1 | A list/set/dict comprehension of generator expression is equivalent to a for loop. |
Boolean Operator | +1 | Every boolean operator (and, or) adds a decision point. |
Cyclomatic complexity is too high in method jump_targets. (6) Open
def jump_targets(self):
""" find each point in the function which is the
destination of a jump (conditional or not).
jump destinations are the points that delimit new
- Read upRead up
- Exclude checks
Cyclomatic Complexity
Cyclomatic Complexity corresponds to the number of decisions a block of code contains plus 1. This number (also called McCabe number) is equal to the number of linearly independent paths through the code. This number can be used as a guide when testing conditional logic in blocks.
Radon analyzes the AST tree of a Python program to compute Cyclomatic Complexity. Statements have the following effects on Cyclomatic Complexity:
Construct | Effect on CC | Reasoning |
---|---|---|
if | +1 | An if statement is a single decision. |
elif | +1 | The elif statement adds another decision. |
else | +0 | The else statement does not cause a new decision. The decision is at the if. |
for | +1 | There is a decision at the start of the loop. |
while | +1 | There is a decision at the while statement. |
except | +1 | Each except branch adds a new conditional path of execution. |
finally | +0 | The finally block is unconditionally executed. |
with | +1 | The with statement roughly corresponds to a try/except block (see PEP 343 for details). |
assert | +1 | The assert statement internally roughly equals a conditional statement. |
Comprehension | +1 | A list/set/dict comprehension of generator expression is equivalent to a for loop. |
Boolean Operator | +1 | Every boolean operator (and, or) adds a decision point. |
Cyclomatic complexity is too high in method iternodes. (6) Open
def iternodes(self):
""" iterate over all nodes in the order that they most logically follow each other. """
done = []
nodes = [self.entry_node, ]
- Read upRead up
- Exclude checks
Cyclomatic Complexity
Cyclomatic Complexity corresponds to the number of decisions a block of code contains plus 1. This number (also called McCabe number) is equal to the number of linearly independent paths through the code. This number can be used as a guide when testing conditional logic in blocks.
Radon analyzes the AST tree of a Python program to compute Cyclomatic Complexity. Statements have the following effects on Cyclomatic Complexity:
Construct | Effect on CC | Reasoning |
---|---|---|
if | +1 | An if statement is a single decision. |
elif | +1 | The elif statement adds another decision. |
else | +0 | The else statement does not cause a new decision. The decision is at the if. |
for | +1 | There is a decision at the start of the loop. |
while | +1 | There is a decision at the while statement. |
except | +1 | Each except branch adds a new conditional path of execution. |
finally | +0 | The finally block is unconditionally executed. |
with | +1 | The with statement roughly corresponds to a try/except block (see PEP 343 for details). |
assert | +1 | The assert statement internally roughly equals a conditional statement. |
Comprehension | +1 | A list/set/dict comprehension of generator expression is equivalent to a for loop. |
Boolean Operator | +1 | Every boolean operator (and, or) adds a decision point. |
Function iternodes
has a Cognitive Complexity of 12 (exceeds 5 allowed). Consider refactoring. Open
def iternodes(self):
""" iterate over all nodes in the order that they most logically follow each other. """
done = []
nodes = [self.entry_node, ]
- Read upRead up
Cognitive Complexity
Cognitive Complexity is a measure of how difficult a unit of code is to intuitively understand. Unlike Cyclomatic Complexity, which determines how difficult your code will be to test, Cognitive Complexity tells you how difficult your code will be to read and comprehend.
A method's cognitive complexity is based on a few simple rules:
- Code is not considered more complex when it uses shorthand that the language provides for collapsing multiple statements into one
- Code is considered more complex for each "break in the linear flow of the code"
- Code is considered more complex when "flow breaking structures are nested"
Further reading
Function jump_targets
has a Cognitive Complexity of 11 (exceeds 5 allowed). Consider refactoring. Open
def jump_targets(self):
""" find each point in the function which is the
destination of a jump (conditional or not).
jump destinations are the points that delimit new
- Read upRead up
Cognitive Complexity
Cognitive Complexity is a measure of how difficult a unit of code is to intuitively understand. Unlike Cyclomatic Complexity, which determines how difficult your code will be to test, Cognitive Complexity tells you how difficult your code will be to read and comprehend.
A method's cognitive complexity is based on a few simple rules:
- Code is not considered more complex when it uses shorthand that the language provides for collapsing multiple statements into one
- Code is considered more complex for each "break in the linear flow of the code"
- Code is considered more complex when "flow breaking structures are nested"
Further reading
Avoid deeply nested control flow statements. Open
if type(dest) != value_t:
print '%x: cannot follow jump to %s' % (ea, repr(dest))
continue
Avoid deeply nested control flow statements. Open
if ea_to not in self.func_items:
print '%x: jumped outside of function to %x' % (ea, ea_to, )
else:
tonode = self.nodes[ea_to]
node.add_jump_to(tonode)
Function transform_ir
has a Cognitive Complexity of 8 (exceeds 5 allowed). Consider refactoring. Open
def transform_ir(self):
""" transform the program into the intermediate representation. """
for node in self.iternodes():
- Read upRead up
Cognitive Complexity
Cognitive Complexity is a measure of how difficult a unit of code is to intuitively understand. Unlike Cyclomatic Complexity, which determines how difficult your code will be to test, Cognitive Complexity tells you how difficult your code will be to read and comprehend.
A method's cognitive complexity is based on a few simple rules:
- Code is not considered more complex when it uses shorthand that the language provides for collapsing multiple statements into one
- Code is considered more complex for each "break in the linear flow of the code"
- Code is considered more complex when "flow breaking structures are nested"
Further reading
Indentation is not a multiple of 4 Open
def jump_targets(self):
- Read upRead up
- Exclude checks
Use indent_size (PEP8 says 4) spaces per indentation level.
For really old code that you don't want to mess up, you can continue
to use 8-space tabs.
Okay: a = 1
Okay: if a == 0:\n a = 1
E111: a = 1
E114: # a = 1
Okay: for item in items:\n pass
E112: for item in items:\npass
E115: for item in items:\n# Hi\n pass
Okay: a = 1\nb = 2
E113: a = 1\n b = 2
E116: a = 1\n # b = 2
Indentation is not a multiple of 4 (comment) Open
# get next node
- Read upRead up
- Exclude checks
Use indent_size (PEP8 says 4) spaces per indentation level.
For really old code that you don't want to mess up, you can continue
to use 8-space tabs.
Okay: a = 1
Okay: if a == 0:\n a = 1
E111: a = 1
E114: # a = 1
Okay: for item in items:\n pass
E112: for item in items:\npass
E115: for item in items:\n# Hi\n pass
Okay: a = 1\nb = 2
E113: a = 1\n b = 2
E116: a = 1\n # b = 2
Indentation is not a multiple of 4 Open
def simplify_statement(self, stmt):
- Read upRead up
- Exclude checks
Use indent_size (PEP8 says 4) spaces per indentation level.
For really old code that you don't want to mess up, you can continue
to use 8-space tabs.
Okay: a = 1
Okay: if a == 0:\n a = 1
E111: a = 1
E114: # a = 1
Okay: for item in items:\n pass
E112: for item in items:\npass
E115: for item in items:\n# Hi\n pass
Okay: a = 1\nb = 2
E113: a = 1\n b = 2
E116: a = 1\n # b = 2
Indentation is not a multiple of 4 Open
tonode = self.nodes[ea]
- Read upRead up
- Exclude checks
Use indent_size (PEP8 says 4) spaces per indentation level.
For really old code that you don't want to mess up, you can continue
to use 8-space tabs.
Okay: a = 1
Okay: if a == 0:\n a = 1
E111: a = 1
E114: # a = 1
Okay: for item in items:\n pass
E112: for item in items:\npass
E115: for item in items:\n# Hi\n pass
Okay: a = 1\nb = 2
E113: a = 1\n b = 2
E116: a = 1\n # b = 2
Indentation is not a multiple of 4 Open
node = nodes.pop(0)
- Read upRead up
- Exclude checks
Use indent_size (PEP8 says 4) spaces per indentation level.
For really old code that you don't want to mess up, you can continue
to use 8-space tabs.
Okay: a = 1
Okay: if a == 0:\n a = 1
E111: a = 1
E114: # a = 1
Okay: for item in items:\n pass
E112: for item in items:\npass
E115: for item in items:\n# Hi\n pass
Okay: a = 1\nb = 2
E113: a = 1\n b = 2
E116: a = 1\n # b = 2
Indentation is not a multiple of 4 Open
for item in node.items:
- Read upRead up
- Exclude checks
Use indent_size (PEP8 says 4) spaces per indentation level.
For really old code that you don't want to mess up, you can continue
to use 8-space tabs.
Okay: a = 1
Okay: if a == 0:\n a = 1
E111: a = 1
E114: # a = 1
Okay: for item in items:\n pass
E112: for item in items:\npass
E115: for item in items:\n# Hi\n pass
Okay: a = 1\nb = 2
E113: a = 1\n b = 2
E116: a = 1\n # b = 2
Indentation is not a multiple of 4 Open
def entry_node(self):
- Read upRead up
- Exclude checks
Use indent_size (PEP8 says 4) spaces per indentation level.
For really old code that you don't want to mess up, you can continue
to use 8-space tabs.
Okay: a = 1
Okay: if a == 0:\n a = 1
E111: a = 1
E114: # a = 1
Okay: for item in items:\n pass
E112: for item in items:\npass
E115: for item in items:\n# Hi\n pass
Okay: a = 1\nb = 2
E113: a = 1\n b = 2
E116: a = 1\n # b = 2
Indentation is not a multiple of 4 Open
node.is_return_node = True
- Read upRead up
- Exclude checks
Use indent_size (PEP8 says 4) spaces per indentation level.
For really old code that you don't want to mess up, you can continue
to use 8-space tabs.
Okay: a = 1
Okay: if a == 0:\n a = 1
E111: a = 1
E114: # a = 1
Okay: for item in items:\n pass
E112: for item in items:\npass
E115: for item in items:\n# Hi\n pass
Okay: a = 1\nb = 2
E113: a = 1\n b = 2
E116: a = 1\n # b = 2
Indentation is not a multiple of 4 Open
def simplify_expressions(self, expr):
- Read upRead up
- Exclude checks
Use indent_size (PEP8 says 4) spaces per indentation level.
For really old code that you don't want to mess up, you can continue
to use 8-space tabs.
Okay: a = 1
Okay: if a == 0:\n a = 1
E111: a = 1
E114: # a = 1
Okay: for item in items:\n pass
E112: for item in items:\npass
E115: for item in items:\n# Hi\n pass
Okay: a = 1\nb = 2
E113: a = 1\n b = 2
E116: a = 1\n # b = 2
Indentation is not a multiple of 4 Open
stmt = item
- Read upRead up
- Exclude checks
Use indent_size (PEP8 says 4) spaces per indentation level.
For really old code that you don't want to mess up, you can continue
to use 8-space tabs.
Okay: a = 1
Okay: if a == 0:\n a = 1
E111: a = 1
E114: # a = 1
Okay: for item in items:\n pass
E112: for item in items:\npass
E115: for item in items:\n# Hi\n pass
Okay: a = 1\nb = 2
E113: a = 1\n b = 2
E116: a = 1\n # b = 2
Indentation is not a multiple of 4 Open
raise RuntimeError("don't know how to make a statement with %s" % (repr(item), ))
- Read upRead up
- Exclude checks
Use indent_size (PEP8 says 4) spaces per indentation level.
For really old code that you don't want to mess up, you can continue
to use 8-space tabs.
Okay: a = 1
Okay: if a == 0:\n a = 1
E111: a = 1
E114: # a = 1
Okay: for item in items:\n pass
E112: for item in items:\npass
E115: for item in items:\n# Hi\n pass
Okay: a = 1\nb = 2
E113: a = 1\n b = 2
E116: a = 1\n # b = 2
Indentation is not a multiple of 4 Open
tonode.add_jump_from(node)
- Read upRead up
- Exclude checks
Use indent_size (PEP8 says 4) spaces per indentation level.
For really old code that you don't want to mess up, you can continue
to use 8-space tabs.
Okay: a = 1
Okay: if a == 0:\n a = 1
E111: a = 1
E114: # a = 1
Okay: for item in items:\n pass
E112: for item in items:\npass
E115: for item in items:\n# Hi\n pass
Okay: a = 1\nb = 2
E113: a = 1\n b = 2
E116: a = 1\n # b = 2
Indentation is not a multiple of 4 Open
node.add_jump_to(tonode)
- Read upRead up
- Exclude checks
Use indent_size (PEP8 says 4) spaces per indentation level.
For really old code that you don't want to mess up, you can continue
to use 8-space tabs.
Okay: a = 1
Okay: if a == 0:\n a = 1
E111: a = 1
E114: # a = 1
Okay: for item in items:\n pass
E112: for item in items:\npass
E115: for item in items:\n# Hi\n pass
Okay: a = 1\nb = 2
E113: a = 1\n b = 2
E116: a = 1\n # b = 2
Indentation is not a multiple of 4 Open
break
- Read upRead up
- Exclude checks
Use indent_size (PEP8 says 4) spaces per indentation level.
For really old code that you don't want to mess up, you can continue
to use 8-space tabs.
Okay: a = 1
Okay: if a == 0:\n a = 1
E111: a = 1
E114: # a = 1
Okay: for item in items:\n pass
E112: for item in items:\npass
E115: for item in items:\n# Hi\n pass
Okay: a = 1\nb = 2
E113: a = 1\n b = 2
E116: a = 1\n # b = 2
Line too long (86 > 79 characters) Open
""" find any expression present in a statement and simplify them. if the statement
- Read upRead up
- Exclude checks
Limit all lines to a maximum of 79 characters.
There are still many devices around that are limited to 80 character
lines; plus, limiting windows to 80 characters makes it possible to
have several windows side-by-side. The default wrapping on such
devices looks ugly. Therefore, please limit all lines to a maximum
of 79 characters. For flowing long blocks of text (docstrings or
comments), limiting the length to 72 characters is recommended.
Reports error E501.
Line too long (82 > 79 characters) Open
has other statements nested (as is the case for if-then, while, etc), then
- Read upRead up
- Exclude checks
Limit all lines to a maximum of 79 characters.
There are still many devices around that are limited to 80 character
lines; plus, limiting windows to 80 characters makes it possible to
have several windows side-by-side. The default wrapping on such
devices looks ugly. Therefore, please limit all lines to a maximum
of 79 characters. For flowing long blocks of text (docstrings or
comments), limiting the length to 72 characters is recommended.
Reports error E501.
Indentation is not a multiple of 4 Open
stmt = statement_t(ea, item)
- Read upRead up
- Exclude checks
Use indent_size (PEP8 says 4) spaces per indentation level.
For really old code that you don't want to mess up, you can continue
to use 8-space tabs.
Okay: a = 1
Okay: if a == 0:\n a = 1
E111: a = 1
E114: # a = 1
Okay: for item in items:\n pass
E112: for item in items:\npass
E115: for item in items:\n# Hi\n pass
Okay: a = 1\nb = 2
E113: a = 1\n b = 2
E116: a = 1\n # b = 2
Indentation is not a multiple of 4 (comment) Open
# for all item in the node, process each statement.
- Read upRead up
- Exclude checks
Use indent_size (PEP8 says 4) spaces per indentation level.
For really old code that you don't want to mess up, you can continue
to use 8-space tabs.
Okay: a = 1
Okay: if a == 0:\n a = 1
E111: a = 1
E114: # a = 1
Okay: for item in items:\n pass
E112: for item in items:\npass
E115: for item in items:\n# Hi\n pass
Okay: a = 1\nb = 2
E113: a = 1\n b = 2
E116: a = 1\n # b = 2
Indentation is not a multiple of 4 Open
self.jump_to.append(node)
- Read upRead up
- Exclude checks
Use indent_size (PEP8 says 4) spaces per indentation level.
For really old code that you don't want to mess up, you can continue
to use 8-space tabs.
Okay: a = 1
Okay: if a == 0:\n a = 1
E111: a = 1
E114: # a = 1
Okay: for item in items:\n pass
E112: for item in items:\npass
E115: for item in items:\n# Hi\n pass
Okay: a = 1\nb = 2
E113: a = 1\n b = 2
E116: a = 1\n # b = 2
Indentation is not a multiple of 4 Open
def find_control_flow(self):
- Read upRead up
- Exclude checks
Use indent_size (PEP8 says 4) spaces per indentation level.
For really old code that you don't want to mess up, you can continue
to use 8-space tabs.
Okay: a = 1
Okay: if a == 0:\n a = 1
E111: a = 1
E114: # a = 1
Okay: for item in items:\n pass
E112: for item in items:\npass
E115: for item in items:\n# Hi\n pass
Okay: a = 1\nb = 2
E113: a = 1\n b = 2
E116: a = 1\n # b = 2
Indentation is not a multiple of 4 Open
print '%x: cannot follow jump to %s' % (ea, repr(dest))
- Read upRead up
- Exclude checks
Use indent_size (PEP8 says 4) spaces per indentation level.
For really old code that you don't want to mess up, you can continue
to use 8-space tabs.
Okay: a = 1
Okay: if a == 0:\n a = 1
E111: a = 1
E114: # a = 1
Okay: for item in items:\n pass
E112: for item in items:\npass
E115: for item in items:\n# Hi\n pass
Okay: a = 1\nb = 2
E113: a = 1\n b = 2
E116: a = 1\n # b = 2
Indentation is not a multiple of 4 Open
print '%x: jumped outside of function: %x' % (ea, next_ea)
- Read upRead up
- Exclude checks
Use indent_size (PEP8 says 4) spaces per indentation level.
For really old code that you don't want to mess up, you can continue
to use 8-space tabs.
Okay: a = 1
Okay: if a == 0:\n a = 1
E111: a = 1
E114: # a = 1
Okay: for item in items:\n pass
E112: for item in items:\npass
E115: for item in items:\n# Hi\n pass
Okay: a = 1\nb = 2
E113: a = 1\n b = 2
E116: a = 1\n # b = 2
Indentation is not a multiple of 4 Open
if node in done:
- Read upRead up
- Exclude checks
Use indent_size (PEP8 says 4) spaces per indentation level.
For really old code that you don't want to mess up, you can continue
to use 8-space tabs.
Okay: a = 1
Okay: if a == 0:\n a = 1
E111: a = 1
E114: # a = 1
Okay: for item in items:\n pass
E112: for item in items:\npass
E115: for item in items:\n# Hi\n pass
Okay: a = 1\nb = 2
E113: a = 1\n b = 2
E116: a = 1\n # b = 2
Indentation is not a multiple of 4 Open
for node in node.jump_to:
- Read upRead up
- Exclude checks
Use indent_size (PEP8 says 4) spaces per indentation level.
For really old code that you don't want to mess up, you can continue
to use 8-space tabs.
Okay: a = 1
Okay: if a == 0:\n a = 1
E111: a = 1
E114: # a = 1
Okay: for item in items:\n pass
E112: for item in items:\npass
E115: for item in items:\n# Hi\n pass
Okay: a = 1\nb = 2
E113: a = 1\n b = 2
E116: a = 1\n # b = 2
Indentation is not a multiple of 4 Open
nodes.append(node)
- Read upRead up
- Exclude checks
Use indent_size (PEP8 says 4) spaces per indentation level.
For really old code that you don't want to mess up, you can continue
to use 8-space tabs.
Okay: a = 1
Okay: if a == 0:\n a = 1
E111: a = 1
E114: # a = 1
Okay: for item in items:\n pass
E112: for item in items:\npass
E115: for item in items:\n# Hi\n pass
Okay: a = 1\nb = 2
E113: a = 1\n b = 2
E116: a = 1\n # b = 2
Indentation is not a multiple of 4 Open
def __repr__(self):
- Read upRead up
- Exclude checks
Use indent_size (PEP8 says 4) spaces per indentation level.
For really old code that you don't want to mess up, you can continue
to use 8-space tabs.
Okay: a = 1
Okay: if a == 0:\n a = 1
E111: a = 1
E114: # a = 1
Okay: for item in items:\n pass
E112: for item in items:\npass
E115: for item in items:\n# Hi\n pass
Okay: a = 1\nb = 2
E113: a = 1\n b = 2
E116: a = 1\n # b = 2
Indentation is not a multiple of 4 Open
def __init__(self, ea, arch, follow_calls=True):
- Read upRead up
- Exclude checks
Use indent_size (PEP8 says 4) spaces per indentation level.
For really old code that you don't want to mess up, you can continue
to use 8-space tabs.
Okay: a = 1
Okay: if a == 0:\n a = 1
E111: a = 1
E114: # a = 1
Okay: for item in items:\n pass
E112: for item in items:\npass
E115: for item in items:\n# Hi\n pass
Okay: a = 1\nb = 2
E113: a = 1\n b = 2
E116: a = 1\n # b = 2
Indentation is not a multiple of 4 Open
if type(dest) == value_t and dest.value in self.func_items:
- Read upRead up
- Exclude checks
Use indent_size (PEP8 says 4) spaces per indentation level.
For really old code that you don't want to mess up, you can continue
to use 8-space tabs.
Okay: a = 1
Okay: if a == 0:\n a = 1
E111: a = 1
E114: # a = 1
Okay: for item in items:\n pass
E112: for item in items:\npass
E115: for item in items:\n# Hi\n pass
Okay: a = 1\nb = 2
E113: a = 1\n b = 2
E116: a = 1\n # b = 2
Indentation is not a multiple of 4 Open
ea = node.ea
- Read upRead up
- Exclude checks
Use indent_size (PEP8 says 4) spaces per indentation level.
For really old code that you don't want to mess up, you can continue
to use 8-space tabs.
Okay: a = 1
Okay: if a == 0:\n a = 1
E111: a = 1
E114: # a = 1
Okay: for item in items:\n pass
E112: for item in items:\npass
E115: for item in items:\n# Hi\n pass
Okay: a = 1\nb = 2
E113: a = 1\n b = 2
E116: a = 1\n # b = 2
Indentation is not a multiple of 4 Open
def iternodes(self):
- Read upRead up
- Exclude checks
Use indent_size (PEP8 says 4) spaces per indentation level.
For really old code that you don't want to mess up, you can continue
to use 8-space tabs.
Okay: a = 1
Okay: if a == 0:\n a = 1
E111: a = 1
E114: # a = 1
Okay: for item in items:\n pass
E112: for item in items:\npass
E115: for item in items:\n# Hi\n pass
Okay: a = 1\nb = 2
E113: a = 1\n b = 2
E116: a = 1\n # b = 2
Expected 2 blank lines, found 1 Open
class node_t(object):
- Read upRead up
- Exclude checks
Separate top-level function and class definitions with two blank lines.
Method definitions inside a class are separated by a single blank
line.
Extra blank lines may be used (sparingly) to separate groups of
related functions. Blank lines may be omitted between a bunch of
related one-liners (e.g. a set of dummy implementations).
Use blank lines in functions, sparingly, to indicate logical
sections.
Okay: def a():\n pass\n\n\ndef b():\n pass
Okay: def a():\n pass\n\n\nasync def b():\n pass
Okay: def a():\n pass\n\n\n# Foo\n# Bar\n\ndef b():\n pass
Okay: default = 1\nfoo = 1
Okay: classify = 1\nfoo = 1
E301: class Foo:\n b = 0\n def bar():\n pass
E302: def a():\n pass\n\ndef b(n):\n pass
E302: def a():\n pass\n\nasync def b(n):\n pass
E303: def a():\n pass\n\n\n\ndef b(n):\n pass
E303: def a():\n\n\n\n pass
E304: @decorator\n\ndef a():\n pass
E305: def a():\n pass\na()
E306: def a():\n def b():\n pass\n def c():\n pass
Indentation is not a multiple of 4 Open
for stmt in node.statements:
- Read upRead up
- Exclude checks
Use indent_size (PEP8 says 4) spaces per indentation level.
For really old code that you don't want to mess up, you can continue
to use 8-space tabs.
Okay: a = 1
Okay: if a == 0:\n a = 1
E111: a = 1
E114: # a = 1
Okay: for item in items:\n pass
E112: for item in items:\npass
E115: for item in items:\n# Hi\n pass
Okay: a = 1\nb = 2
E113: a = 1\n b = 2
E116: a = 1\n # b = 2
Indentation is not a multiple of 4 Open
print '%x: jumped outside of function to %x' % (ea, ea_to, )
- Read upRead up
- Exclude checks
Use indent_size (PEP8 says 4) spaces per indentation level.
For really old code that you don't want to mess up, you can continue
to use 8-space tabs.
Okay: a = 1
Okay: if a == 0:\n a = 1
E111: a = 1
E114: # a = 1
Okay: for item in items:\n pass
E112: for item in items:\npass
E115: for item in items:\n# Hi\n pass
Okay: a = 1\nb = 2
E113: a = 1\n b = 2
E116: a = 1\n # b = 2
Indentation is not a multiple of 4 Open
tonode.add_jump_from(node)
- Read upRead up
- Exclude checks
Use indent_size (PEP8 says 4) spaces per indentation level.
For really old code that you don't want to mess up, you can continue
to use 8-space tabs.
Okay: a = 1
Okay: if a == 0:\n a = 1
E111: a = 1
E114: # a = 1
Okay: for item in items:\n pass
E112: for item in items:\npass
E115: for item in items:\n# Hi\n pass
Okay: a = 1\nb = 2
E113: a = 1\n b = 2
E116: a = 1\n # b = 2
Line too long (98 > 79 characters) Open
""" combine expressions until they cannot be combined any more. return the new expression. """
- Read upRead up
- Exclude checks
Limit all lines to a maximum of 79 characters.
There are still many devices around that are limited to 80 character
lines; plus, limiting windows to 80 characters makes it possible to
have several windows side-by-side. The default wrapping on such
devices looks ugly. Therefore, please limit all lines to a maximum
of 79 characters. For flowing long blocks of text (docstrings or
comments), limiting the length to 72 characters is recommended.
Reports error E501.
Indentation is not a multiple of 4 Open
def make_statement(self, ea, item):
- Read upRead up
- Exclude checks
Use indent_size (PEP8 says 4) spaces per indentation level.
For really old code that you don't want to mess up, you can continue
to use 8-space tabs.
Okay: a = 1
Okay: if a == 0:\n a = 1
E111: a = 1
E114: # a = 1
Okay: for item in items:\n pass
E112: for item in items:\npass
E115: for item in items:\n# Hi\n pass
Okay: a = 1\nb = 2
E113: a = 1\n b = 2
E116: a = 1\n # b = 2
Line too long (87 > 79 characters) Open
raise RuntimeError("don't know how to make a statement with %s" % (repr(item), ))
- Read upRead up
- Exclude checks
Limit all lines to a maximum of 79 characters.
There are still many devices around that are limited to 80 character
lines; plus, limiting windows to 80 characters makes it possible to
have several windows side-by-side. The default wrapping on such
devices looks ugly. Therefore, please limit all lines to a maximum
of 79 characters. For flowing long blocks of text (docstrings or
comments), limiting the length to 72 characters is recommended.
Reports error E501.
Indentation is not a multiple of 4 Open
while True:
- Read upRead up
- Exclude checks
Use indent_size (PEP8 says 4) spaces per indentation level.
For really old code that you don't want to mess up, you can continue
to use 8-space tabs.
Okay: a = 1
Okay: if a == 0:\n a = 1
E111: a = 1
E114: # a = 1
Okay: for item in items:\n pass
E112: for item in items:\npass
E115: for item in items:\n# Hi\n pass
Okay: a = 1\nb = 2
E113: a = 1\n b = 2
E116: a = 1\n # b = 2
Indentation is not a multiple of 4 Open
node.add_jump_to(tonode)
- Read upRead up
- Exclude checks
Use indent_size (PEP8 says 4) spaces per indentation level.
For really old code that you don't want to mess up, you can continue
to use 8-space tabs.
Okay: a = 1
Okay: if a == 0:\n a = 1
E111: a = 1
E114: # a = 1
Okay: for item in items:\n pass
E112: for item in items:\npass
E115: for item in items:\n# Hi\n pass
Okay: a = 1\nb = 2
E113: a = 1\n b = 2
E116: a = 1\n # b = 2
Indentation is not a multiple of 4 Open
done.append(node)
- Read upRead up
- Exclude checks
Use indent_size (PEP8 says 4) spaces per indentation level.
For really old code that you don't want to mess up, you can continue
to use 8-space tabs.
Okay: a = 1
Okay: if a == 0:\n a = 1
E111: a = 1
E114: # a = 1
Okay: for item in items:\n pass
E112: for item in items:\npass
E115: for item in items:\n# Hi\n pass
Okay: a = 1\nb = 2
E113: a = 1\n b = 2
E116: a = 1\n # b = 2
Indentation is not a multiple of 4 Open
if node in nodes:
- Read upRead up
- Exclude checks
Use indent_size (PEP8 says 4) spaces per indentation level.
For really old code that you don't want to mess up, you can continue
to use 8-space tabs.
Okay: a = 1
Okay: if a == 0:\n a = 1
E111: a = 1
E114: # a = 1
Okay: for item in items:\n pass
E112: for item in items:\npass
E115: for item in items:\n# Hi\n pass
Okay: a = 1\nb = 2
E113: a = 1\n b = 2
E116: a = 1\n # b = 2
Indentation is not a multiple of 4 Open
def __init__(self, ea):
- Read upRead up
- Exclude checks
Use indent_size (PEP8 says 4) spaces per indentation level.
For really old code that you don't want to mess up, you can continue
to use 8-space tabs.
Okay: a = 1
Okay: if a == 0:\n a = 1
E111: a = 1
E114: # a = 1
Okay: for item in items:\n pass
E112: for item in items:\npass
E115: for item in items:\n# Hi\n pass
Okay: a = 1\nb = 2
E113: a = 1\n b = 2
E116: a = 1\n # b = 2
Indentation is not a multiple of 4 Open
lines.append('<loc_%x>' % (node.ea, ))
- Read upRead up
- Exclude checks
Use indent_size (PEP8 says 4) spaces per indentation level.
For really old code that you don't want to mess up, you can continue
to use 8-space tabs.
Okay: a = 1
Okay: if a == 0:\n a = 1
E111: a = 1
E114: # a = 1
Okay: for item in items:\n pass
E112: for item in items:\npass
E115: for item in items:\n# Hi\n pass
Okay: a = 1\nb = 2
E113: a = 1\n b = 2
E116: a = 1\n # b = 2
Indentation is not a multiple of 4 Open
if self.arch.has_jump(item):
- Read upRead up
- Exclude checks
Use indent_size (PEP8 says 4) spaces per indentation level.
For really old code that you don't want to mess up, you can continue
to use 8-space tabs.
Okay: a = 1
Okay: if a == 0:\n a = 1
E111: a = 1
E114: # a = 1
Okay: for item in items:\n pass
E112: for item in items:\npass
E115: for item in items:\n# Hi\n pass
Okay: a = 1\nb = 2
E113: a = 1\n b = 2
E116: a = 1\n # b = 2
Indentation is not a multiple of 4 Open
break
- Read upRead up
- Exclude checks
Use indent_size (PEP8 says 4) spaces per indentation level.
For really old code that you don't want to mess up, you can continue
to use 8-space tabs.
Okay: a = 1
Okay: if a == 0:\n a = 1
E111: a = 1
E114: # a = 1
Okay: for item in items:\n pass
E112: for item in items:\npass
E115: for item in items:\n# Hi\n pass
Okay: a = 1\nb = 2
E113: a = 1\n b = 2
E116: a = 1\n # b = 2
Indentation is not a multiple of 4 Open
lines.append('')
- Read upRead up
- Exclude checks
Use indent_size (PEP8 says 4) spaces per indentation level.
For really old code that you don't want to mess up, you can continue
to use 8-space tabs.
Okay: a = 1
Okay: if a == 0:\n a = 1
E111: a = 1
E114: # a = 1
Okay: for item in items:\n pass
E112: for item in items:\npass
E115: for item in items:\n# Hi\n pass
Okay: a = 1\nb = 2
E113: a = 1\n b = 2
E116: a = 1\n # b = 2
Indentation is not a multiple of 4 Open
node = node_t(target)
- Read upRead up
- Exclude checks
Use indent_size (PEP8 says 4) spaces per indentation level.
For really old code that you don't want to mess up, you can continue
to use 8-space tabs.
Okay: a = 1
Okay: if a == 0:\n a = 1
E111: a = 1
E114: # a = 1
Okay: for item in items:\n pass
E112: for item in items:\npass
E115: for item in items:\n# Hi\n pass
Okay: a = 1\nb = 2
E113: a = 1\n b = 2
E116: a = 1\n # b = 2
Indentation is not a multiple of 4 Open
node = next_nodes.pop(0)
- Read upRead up
- Exclude checks
Use indent_size (PEP8 says 4) spaces per indentation level.
For really old code that you don't want to mess up, you can continue
to use 8-space tabs.
Okay: a = 1
Okay: if a == 0:\n a = 1
E111: a = 1
E114: # a = 1
Okay: for item in items:\n pass
E112: for item in items:\npass
E115: for item in items:\n# Hi\n pass
Okay: a = 1\nb = 2
E113: a = 1\n b = 2
E116: a = 1\n # b = 2
Indentation is not a multiple of 4 Open
break
- Read upRead up
- Exclude checks
Use indent_size (PEP8 says 4) spaces per indentation level.
For really old code that you don't want to mess up, you can continue
to use 8-space tabs.
Okay: a = 1
Okay: if a == 0:\n a = 1
E111: a = 1
E114: # a = 1
Okay: for item in items:\n pass
E112: for item in items:\npass
E115: for item in items:\n# Hi\n pass
Okay: a = 1\nb = 2
E113: a = 1\n b = 2
E116: a = 1\n # b = 2
Indentation is not a multiple of 4 Open
if target in self.nodes.keys():
- Read upRead up
- Exclude checks
Use indent_size (PEP8 says 4) spaces per indentation level.
For really old code that you don't want to mess up, you can continue
to use 8-space tabs.
Okay: a = 1
Okay: if a == 0:\n a = 1
E111: a = 1
E114: # a = 1
Okay: for item in items:\n pass
E112: for item in items:\npass
E115: for item in items:\n# Hi\n pass
Okay: a = 1\nb = 2
E113: a = 1\n b = 2
E116: a = 1\n # b = 2
Indentation is not a multiple of 4 Open
for dest in self.arch.jump_branches(ea):
- Read upRead up
- Exclude checks
Use indent_size (PEP8 says 4) spaces per indentation level.
For really old code that you don't want to mess up, you can continue
to use 8-space tabs.
Okay: a = 1
Okay: if a == 0:\n a = 1
E111: a = 1
E114: # a = 1
Okay: for item in items:\n pass
E112: for item in items:\npass
E115: for item in items:\n# Hi\n pass
Okay: a = 1\nb = 2
E113: a = 1\n b = 2
E116: a = 1\n # b = 2
Indentation is not a multiple of 4 Open
self.simplify_statement(_stmt)
- Read upRead up
- Exclude checks
Use indent_size (PEP8 says 4) spaces per indentation level.
For really old code that you don't want to mess up, you can continue
to use 8-space tabs.
Okay: a = 1
Okay: if a == 0:\n a = 1
E111: a = 1
E114: # a = 1
Okay: for item in items:\n pass
E112: for item in items:\npass
E115: for item in items:\n# Hi\n pass
Okay: a = 1\nb = 2
E113: a = 1\n b = 2
E116: a = 1\n # b = 2
Indentation is not a multiple of 4 Open
def transform_ir(self):
- Read upRead up
- Exclude checks
Use indent_size (PEP8 says 4) spaces per indentation level.
For really old code that you don't want to mess up, you can continue
to use 8-space tabs.
Okay: a = 1
Okay: if a == 0:\n a = 1
E111: a = 1
E114: # a = 1
Okay: for item in items:\n pass
E112: for item in items:\npass
E115: for item in items:\n# Hi\n pass
Okay: a = 1\nb = 2
E113: a = 1\n b = 2
E116: a = 1\n # b = 2
Indentation is not a multiple of 4 Open
def add_jump_from(self, node):
- Read upRead up
- Exclude checks
Use indent_size (PEP8 says 4) spaces per indentation level.
For really old code that you don't want to mess up, you can continue
to use 8-space tabs.
Okay: a = 1
Okay: if a == 0:\n a = 1
E111: a = 1
E114: # a = 1
Okay: for item in items:\n pass
E112: for item in items:\npass
E115: for item in items:\n# Hi\n pass
Okay: a = 1\nb = 2
E113: a = 1\n b = 2
E116: a = 1\n # b = 2
Indentation is not a multiple of 4 Open
self.jump_from.append(node)
- Read upRead up
- Exclude checks
Use indent_size (PEP8 says 4) spaces per indentation level.
For really old code that you don't want to mess up, you can continue
to use 8-space tabs.
Okay: a = 1
Okay: if a == 0:\n a = 1
E111: a = 1
E114: # a = 1
Okay: for item in items:\n pass
E112: for item in items:\npass
E115: for item in items:\n# Hi\n pass
Okay: a = 1\nb = 2
E113: a = 1\n b = 2
E116: a = 1\n # b = 2
Indentation is not a multiple of 4 Open
def add_jump_to(self, node):
- Read upRead up
- Exclude checks
Use indent_size (PEP8 says 4) spaces per indentation level.
For really old code that you don't want to mess up, you can continue
to use 8-space tabs.
Okay: a = 1
Okay: if a == 0:\n a = 1
E111: a = 1
E114: # a = 1
Okay: for item in items:\n pass
E112: for item in items:\npass
E115: for item in items:\n# Hi\n pass
Okay: a = 1\nb = 2
E113: a = 1\n b = 2
E116: a = 1\n # b = 2
Indentation is not a multiple of 4 Open
def __repr__(self):
- Read upRead up
- Exclude checks
Use indent_size (PEP8 says 4) spaces per indentation level.
For really old code that you don't want to mess up, you can continue
to use 8-space tabs.
Okay: a = 1
Okay: if a == 0:\n a = 1
E111: a = 1
E114: # a = 1
Okay: for item in items:\n pass
E112: for item in items:\npass
E115: for item in items:\n# Hi\n pass
Okay: a = 1\nb = 2
E113: a = 1\n b = 2
E116: a = 1\n # b = 2
Indentation is not a multiple of 4 Open
next_nodes.append(node)
- Read upRead up
- Exclude checks
Use indent_size (PEP8 says 4) spaces per indentation level.
For really old code that you don't want to mess up, you can continue
to use 8-space tabs.
Okay: a = 1
Okay: if a == 0:\n a = 1
E111: a = 1
E114: # a = 1
Okay: for item in items:\n pass
E112: for item in items:\npass
E115: for item in items:\n# Hi\n pass
Okay: a = 1\nb = 2
E113: a = 1\n b = 2
E116: a = 1\n # b = 2
Line too long (91 > 79 characters) Open
""" iterate over all nodes in the order that they most logically follow each other. """
- Read upRead up
- Exclude checks
Limit all lines to a maximum of 79 characters.
There are still many devices around that are limited to 80 character
lines; plus, limiting windows to 80 characters makes it possible to
have several windows side-by-side. The default wrapping on such
devices looks ugly. Therefore, please limit all lines to a maximum
of 79 characters. For flowing long blocks of text (docstrings or
comments), limiting the length to 72 characters is recommended.
Reports error E501.
Expected 2 blank lines, found 1 Open
class graph_t(object):
- Read upRead up
- Exclude checks
Separate top-level function and class definitions with two blank lines.
Method definitions inside a class are separated by a single blank
line.
Extra blank lines may be used (sparingly) to separate groups of
related functions. Blank lines may be omitted between a bunch of
related one-liners (e.g. a set of dummy implementations).
Use blank lines in functions, sparingly, to indicate logical
sections.
Okay: def a():\n pass\n\n\ndef b():\n pass
Okay: def a():\n pass\n\n\nasync def b():\n pass
Okay: def a():\n pass\n\n\n# Foo\n# Bar\n\ndef b():\n pass
Okay: default = 1\nfoo = 1
Okay: classify = 1\nfoo = 1
E301: class Foo:\n b = 0\n def bar():\n pass
E302: def a():\n pass\n\ndef b(n):\n pass
E302: def a():\n pass\n\nasync def b(n):\n pass
E303: def a():\n pass\n\n\n\ndef b(n):\n pass
E303: def a():\n\n\n\n pass
E304: @decorator\n\ndef a():\n pass
E305: def a():\n pass\na()
E306: def a():\n def b():\n pass\n def c():\n pass
Indentation is not a multiple of 4 Open
@property
- Read upRead up
- Exclude checks
Use indent_size (PEP8 says 4) spaces per indentation level.
For really old code that you don't want to mess up, you can continue
to use 8-space tabs.
Okay: a = 1
Okay: if a == 0:\n a = 1
E111: a = 1
E114: # a = 1
Okay: for item in items:\n pass
E112: for item in items:\npass
E115: for item in items:\n# Hi\n pass
Okay: a = 1\nb = 2
E113: a = 1\n b = 2
E116: a = 1\n # b = 2
Indentation is not a multiple of 4 Open
break
- Read upRead up
- Exclude checks
Use indent_size (PEP8 says 4) spaces per indentation level.
For really old code that you don't want to mess up, you can continue
to use 8-space tabs.
Okay: a = 1
Okay: if a == 0:\n a = 1
E111: a = 1
E114: # a = 1
Okay: for item in items:\n pass
E112: for item in items:\npass
E115: for item in items:\n# Hi\n pass
Okay: a = 1\nb = 2
E113: a = 1\n b = 2
E116: a = 1\n # b = 2
Indentation is not a multiple of 4 Open
continue
- Read upRead up
- Exclude checks
Use indent_size (PEP8 says 4) spaces per indentation level.
For really old code that you don't want to mess up, you can continue
to use 8-space tabs.
Okay: a = 1
Okay: if a == 0:\n a = 1
E111: a = 1
E114: # a = 1
Okay: for item in items:\n pass
E112: for item in items:\npass
E115: for item in items:\n# Hi\n pass
Okay: a = 1\nb = 2
E113: a = 1\n b = 2
E116: a = 1\n # b = 2
Indentation is not a multiple of 4 Open
self.nodes[target] = node
- Read upRead up
- Exclude checks
Use indent_size (PEP8 says 4) spaces per indentation level.
For really old code that you don't want to mess up, you can continue
to use 8-space tabs.
Okay: a = 1
Okay: if a == 0:\n a = 1
E111: a = 1
E114: # a = 1
Okay: for item in items:\n pass
E112: for item in items:\npass
E115: for item in items:\n# Hi\n pass
Okay: a = 1\nb = 2
E113: a = 1\n b = 2
E116: a = 1\n # b = 2
Indentation is not a multiple of 4 Open
tonode = self.nodes[ea_to]
- Read upRead up
- Exclude checks
Use indent_size (PEP8 says 4) spaces per indentation level.
For really old code that you don't want to mess up, you can continue
to use 8-space tabs.
Okay: a = 1
Okay: if a == 0:\n a = 1
E111: a = 1
E114: # a = 1
Okay: for item in items:\n pass
E112: for item in items:\npass
E115: for item in items:\n# Hi\n pass
Okay: a = 1\nb = 2
E113: a = 1\n b = 2
E116: a = 1\n # b = 2
Indentation is not a multiple of 4 Open
node.falls_into = tonode
- Read upRead up
- Exclude checks
Use indent_size (PEP8 says 4) spaces per indentation level.
For really old code that you don't want to mess up, you can continue
to use 8-space tabs.
Okay: a = 1
Okay: if a == 0:\n a = 1
E111: a = 1
E114: # a = 1
Okay: for item in items:\n pass
E112: for item in items:\npass
E115: for item in items:\n# Hi\n pass
Okay: a = 1\nb = 2
E113: a = 1\n b = 2
E116: a = 1\n # b = 2
Indentation is not a multiple of 4 Open
yield node
- Read upRead up
- Exclude checks
Use indent_size (PEP8 says 4) spaces per indentation level.
For really old code that you don't want to mess up, you can continue
to use 8-space tabs.
Okay: a = 1
Okay: if a == 0:\n a = 1
E111: a = 1
E114: # a = 1
Okay: for item in items:\n pass
E112: for item in items:\npass
E115: for item in items:\n# Hi\n pass
Okay: a = 1\nb = 2
E113: a = 1\n b = 2
E116: a = 1\n # b = 2
Indentation is not a multiple of 4 Open
stmt = self.simplify_statement(stmt)
- Read upRead up
- Exclude checks
Use indent_size (PEP8 says 4) spaces per indentation level.
For really old code that you don't want to mess up, you can continue
to use 8-space tabs.
Okay: a = 1
Okay: if a == 0:\n a = 1
E111: a = 1
E114: # a = 1
Okay: for item in items:\n pass
E112: for item in items:\npass
E115: for item in items:\n# Hi\n pass
Okay: a = 1\nb = 2
E113: a = 1\n b = 2
E116: a = 1\n # b = 2
Indentation is not a multiple of 4 Open
stmt = self.make_statement(item, expr)
- Read upRead up
- Exclude checks
Use indent_size (PEP8 says 4) spaces per indentation level.
For really old code that you don't want to mess up, you can continue
to use 8-space tabs.
Okay: a = 1
Okay: if a == 0:\n a = 1
E111: a = 1
E114: # a = 1
Okay: for item in items:\n pass
E112: for item in items:\npass
E115: for item in items:\n# Hi\n pass
Okay: a = 1\nb = 2
E113: a = 1\n b = 2
E116: a = 1\n # b = 2
Indentation is not a multiple of 4 (comment) Open
# if the node 'falls' without branch instruction into another one, add a goto for clarity
- Read upRead up
- Exclude checks
Use indent_size (PEP8 says 4) spaces per indentation level.
For really old code that you don't want to mess up, you can continue
to use 8-space tabs.
Okay: a = 1
Okay: if a == 0:\n a = 1
E111: a = 1
E114: # a = 1
Okay: for item in items:\n pass
E112: for item in items:\npass
E115: for item in items:\n# Hi\n pass
Okay: a = 1\nb = 2
E113: a = 1\n b = 2
E116: a = 1\n # b = 2
Line too long (97 > 79 characters) Open
node.statements.append(goto_t(item, value_t(node.falls_into.ea, self.arch.address_size)))
- Read upRead up
- Exclude checks
Limit all lines to a maximum of 79 characters.
There are still many devices around that are limited to 80 character
lines; plus, limiting windows to 80 characters makes it possible to
have several windows side-by-side. The default wrapping on such
devices looks ugly. Therefore, please limit all lines to a maximum
of 79 characters. For flowing long blocks of text (docstrings or
comments), limiting the length to 72 characters is recommended.
Reports error E501.
Indentation is not a multiple of 4 (comment) Open
# upgrade expr to statement if necessary
- Read upRead up
- Exclude checks
Use indent_size (PEP8 says 4) spaces per indentation level.
For really old code that you don't want to mess up, you can continue
to use 8-space tabs.
Okay: a = 1
Okay: if a == 0:\n a = 1
E111: a = 1
E114: # a = 1
Okay: for item in items:\n pass
E112: for item in items:\npass
E115: for item in items:\n# Hi\n pass
Okay: a = 1\nb = 2
E113: a = 1\n b = 2
E116: a = 1\n # b = 2
Indentation is not a multiple of 4 (comment) Open
# apply simplification rules to all expressions in this statement
- Read upRead up
- Exclude checks
Use indent_size (PEP8 says 4) spaces per indentation level.
For really old code that you don't want to mess up, you can continue
to use 8-space tabs.
Okay: a = 1
Okay: if a == 0:\n a = 1
E111: a = 1
E114: # a = 1
Okay: for item in items:\n pass
E112: for item in items:\npass
E115: for item in items:\n# Hi\n pass
Okay: a = 1\nb = 2
E113: a = 1\n b = 2
E116: a = 1\n # b = 2
Indentation is not a multiple of 4 Open
node.statements.append(stmt)
- Read upRead up
- Exclude checks
Use indent_size (PEP8 says 4) spaces per indentation level.
For really old code that you don't want to mess up, you can continue
to use 8-space tabs.
Okay: a = 1
Okay: if a == 0:\n a = 1
E111: a = 1
E114: # a = 1
Okay: for item in items:\n pass
E112: for item in items:\npass
E115: for item in items:\n# Hi\n pass
Okay: a = 1\nb = 2
E113: a = 1\n b = 2
E116: a = 1\n # b = 2
Line too long (95 > 79 characters) Open
# if the node 'falls' without branch instruction into another one, add a goto for clarity
- Read upRead up
- Exclude checks
Limit all lines to a maximum of 79 characters.
There are still many devices around that are limited to 80 character
lines; plus, limiting windows to 80 characters makes it possible to
have several windows side-by-side. The default wrapping on such
devices looks ugly. Therefore, please limit all lines to a maximum
of 79 characters. For flowing long blocks of text (docstrings or
comments), limiting the length to 72 characters is recommended.
Reports error E501.
Indentation is not a multiple of 4 Open
if node.falls_into:
- Read upRead up
- Exclude checks
Use indent_size (PEP8 says 4) spaces per indentation level.
For really old code that you don't want to mess up, you can continue
to use 8-space tabs.
Okay: a = 1
Okay: if a == 0:\n a = 1
E111: a = 1
E114: # a = 1
Okay: for item in items:\n pass
E112: for item in items:\npass
E115: for item in items:\n# Hi\n pass
Okay: a = 1\nb = 2
E113: a = 1\n b = 2
E116: a = 1\n # b = 2
Blank line at end of file Open
- Read upRead up
- Exclude checks
Trailing blank lines are superfluous.
Okay: spam(1)
W391: spam(1)\n
However the last line should end with a new line (warning W292).