Cyclomatic complexity is too high in method get_operand_expression. (8) Open
def get_operand_expression(self, ea, n):
""" return an expression representing the 'n'-th operand of the instruction at 'ea'. """
insn = idautils.DecodeInstruction(ea)
op = insn[n]
- Read upRead up
- Exclude checks
Cyclomatic Complexity
Cyclomatic Complexity corresponds to the number of decisions a block of code contains plus 1. This number (also called McCabe number) is equal to the number of linearly independent paths through the code. This number can be used as a guide when testing conditional logic in blocks.
Radon analyzes the AST tree of a Python program to compute Cyclomatic Complexity. Statements have the following effects on Cyclomatic Complexity:
Construct | Effect on CC | Reasoning |
---|---|---|
if | +1 | An if statement is a single decision. |
elif | +1 | The elif statement adds another decision. |
else | +0 | The else statement does not cause a new decision. The decision is at the if. |
for | +1 | There is a decision at the start of the loop. |
while | +1 | There is a decision at the while statement. |
except | +1 | Each except branch adds a new conditional path of execution. |
finally | +0 | The finally block is unconditionally executed. |
with | +1 | The with statement roughly corresponds to a try/except block (see PEP 343 for details). |
assert | +1 | The assert statement internally roughly equals a conditional statement. |
Comprehension | +1 | A list/set/dict comprehension of generator expression is equivalent to a for loop. |
Boolean Operator | +1 | Every boolean operator (and, or) adds a decision point. |
Cyclomatic complexity is too high in method get_call_expression. (6) Open
def get_call_expression(self, ea):
""" get an expression representing a function call at this address. """
insn = idautils.DecodeInstruction(ea)
- Read upRead up
- Exclude checks
Cyclomatic Complexity
Cyclomatic Complexity corresponds to the number of decisions a block of code contains plus 1. This number (also called McCabe number) is equal to the number of linearly independent paths through the code. This number can be used as a guide when testing conditional logic in blocks.
Radon analyzes the AST tree of a Python program to compute Cyclomatic Complexity. Statements have the following effects on Cyclomatic Complexity:
Construct | Effect on CC | Reasoning |
---|---|---|
if | +1 | An if statement is a single decision. |
elif | +1 | The elif statement adds another decision. |
else | +0 | The else statement does not cause a new decision. The decision is at the if. |
for | +1 | There is a decision at the start of the loop. |
while | +1 | There is a decision at the while statement. |
except | +1 | Each except branch adds a new conditional path of execution. |
finally | +0 | The finally block is unconditionally executed. |
with | +1 | The with statement roughly corresponds to a try/except block (see PEP 343 for details). |
assert | +1 | The assert statement internally roughly equals a conditional statement. |
Comprehension | +1 | A list/set/dict comprehension of generator expression is equivalent to a for loop. |
Boolean Operator | +1 | Every boolean operator (and, or) adds a decision point. |
Function get_operand_expression
has a Cognitive Complexity of 10 (exceeds 5 allowed). Consider refactoring. Open
def get_operand_expression(self, ea, n):
""" return an expression representing the 'n'-th operand of the instruction at 'ea'. """
insn = idautils.DecodeInstruction(ea)
op = insn[n]
- Read upRead up
Cognitive Complexity
Cognitive Complexity is a measure of how difficult a unit of code is to intuitively understand. Unlike Cyclomatic Complexity, which determines how difficult your code will be to test, Cognitive Complexity tells you how difficult your code will be to read and comprehend.
A method's cognitive complexity is based on a few simple rules:
- Code is not considered more complex when it uses shorthand that the language provides for collapsing multiple statements into one
- Code is considered more complex for each "break in the linear flow of the code"
- Code is considered more complex when "flow breaking structures are nested"
Further reading
Function get_call_expression
has a Cognitive Complexity of 8 (exceeds 5 allowed). Consider refactoring. Open
def get_call_expression(self, ea):
""" get an expression representing a function call at this address. """
insn = idautils.DecodeInstruction(ea)
- Read upRead up
Cognitive Complexity
Cognitive Complexity is a measure of how difficult a unit of code is to intuitively understand. Unlike Cyclomatic Complexity, which determines how difficult your code will be to test, Cognitive Complexity tells you how difficult your code will be to read and comprehend.
A method's cognitive complexity is based on a few simple rules:
- Code is not considered more complex when it uses shorthand that the language provides for collapsing multiple statements into one
- Code is considered more complex for each "break in the linear flow of the code"
- Code is considered more complex when "flow breaking structures are nested"
Further reading
Identical blocks of code found in 2 locations. Consider refactoring. Open
expr = regloc_t(op.reg, self.get_register_size(op.reg), name=self.get_regname(op.reg))
- Read upRead up
Duplicated Code
Duplicated code can lead to software that is hard to understand and difficult to change. The Don't Repeat Yourself (DRY) principle states:
Every piece of knowledge must have a single, unambiguous, authoritative representation within a system.
When you violate DRY, bugs and maintenance problems are sure to follow. Duplicated code has a tendency to both continue to replicate and also to diverge (leaving bugs as two similar implementations differ in subtle ways).
Tuning
This issue has a mass of 32.
We set useful threshold defaults for the languages we support but you may want to adjust these settings based on your project guidelines.
The threshold configuration represents the minimum mass a code block must have to be analyzed for duplication. The lower the threshold, the more fine-grained the comparison.
If the engine is too easily reporting duplication, try raising the threshold. If you suspect that the engine isn't catching enough duplication, try lowering the threshold. The best setting tends to differ from language to language.
See codeclimate-duplication
's documentation for more information about tuning the mass threshold in your .codeclimate.yml
.
Refactorings
- Extract Method
- Extract Class
- Form Template Method
- Introduce Null Object
- Pull Up Method
- Pull Up Field
- Substitute Algorithm
Further Reading
- Don't Repeat Yourself on the C2 Wiki
- Duplicated Code on SourceMaking
- Refactoring: Improving the Design of Existing Code by Martin Fowler. Duplicated Code, p76
Identical blocks of code found in 2 locations. Consider refactoring. Open
expr = regloc_t(op.reg, self.get_register_size(op.reg), name=self.get_regname(op.reg))
- Read upRead up
Duplicated Code
Duplicated code can lead to software that is hard to understand and difficult to change. The Don't Repeat Yourself (DRY) principle states:
Every piece of knowledge must have a single, unambiguous, authoritative representation within a system.
When you violate DRY, bugs and maintenance problems are sure to follow. Duplicated code has a tendency to both continue to replicate and also to diverge (leaving bugs as two similar implementations differ in subtle ways).
Tuning
This issue has a mass of 32.
We set useful threshold defaults for the languages we support but you may want to adjust these settings based on your project guidelines.
The threshold configuration represents the minimum mass a code block must have to be analyzed for duplication. The lower the threshold, the more fine-grained the comparison.
If the engine is too easily reporting duplication, try raising the threshold. If you suspect that the engine isn't catching enough duplication, try lowering the threshold. The best setting tends to differ from language to language.
See codeclimate-duplication
's documentation for more information about tuning the mass threshold in your .codeclimate.yml
.
Refactorings
- Extract Method
- Extract Class
- Form Template Method
- Introduce Null Object
- Pull Up Method
- Pull Up Field
- Substitute Algorithm
Further Reading
- Don't Repeat Yourself on the C2 Wiki
- Duplicated Code on SourceMaking
- Refactoring: Improving the Design of Existing Code by Martin Fowler. Duplicated Code, p76
Indentation is not a multiple of 4 Open
def get_instruction_size(self, ea):
- Read upRead up
- Exclude checks
Use indent_size (PEP8 says 4) spaces per indentation level.
For really old code that you don't want to mess up, you can continue
to use 8-space tabs.
Okay: a = 1
Okay: if a == 0:\n a = 1
E111: a = 1
E114: # a = 1
Okay: for item in items:\n pass
E112: for item in items:\npass
E115: for item in items:\n# Hi\n pass
Okay: a = 1\nb = 2
E113: a = 1\n b = 2
E116: a = 1\n # b = 2
Indentation is not a multiple of 4 Open
raise ValueError("don't know how to get the size of this operand")
- Read upRead up
- Exclude checks
Use indent_size (PEP8 says 4) spaces per indentation level.
For really old code that you don't want to mess up, you can continue
to use 8-space tabs.
Okay: a = 1
Okay: if a == 0:\n a = 1
E111: a = 1
E114: # a = 1
Okay: for item in items:\n pass
E112: for item in items:\npass
E115: for item in items:\n# Hi\n pass
Okay: a = 1\nb = 2
E113: a = 1\n b = 2
E116: a = 1\n # b = 2
Indentation is not a multiple of 4 Open
addr = self.as_signed(op.addr)
- Read upRead up
- Exclude checks
Use indent_size (PEP8 says 4) spaces per indentation level.
For really old code that you don't want to mess up, you can continue
to use 8-space tabs.
Okay: a = 1
Okay: if a == 0:\n a = 1
E111: a = 1
E114: # a = 1
Okay: for item in items:\n pass
E112: for item in items:\npass
E115: for item in items:\n# Hi\n pass
Okay: a = 1\nb = 2
E113: a = 1\n b = 2
E116: a = 1\n # b = 2
Indentation is not a multiple of 4 Open
expr = regloc_t(op.reg, self.get_register_size(op.reg), name=self.get_regname(op.reg))
- Read upRead up
- Exclude checks
Use indent_size (PEP8 says 4) spaces per indentation level.
For really old code that you don't want to mess up, you can continue
to use 8-space tabs.
Okay: a = 1
Okay: if a == 0:\n a = 1
E111: a = 1
E114: # a = 1
Okay: for item in items:\n pass
E112: for item in items:\npass
E115: for item in items:\n# Hi\n pass
Okay: a = 1\nb = 2
E113: a = 1\n b = 2
E116: a = 1\n # b = 2
Indentation is not a multiple of 4 Open
return False
- Read upRead up
- Exclude checks
Use indent_size (PEP8 says 4) spaces per indentation level.
For really old code that you don't want to mess up, you can continue
to use 8-space tabs.
Okay: a = 1
Okay: if a == 0:\n a = 1
E111: a = 1
E114: # a = 1
Okay: for item in items:\n pass
E112: for item in items:\npass
E115: for item in items:\n# Hi\n pass
Okay: a = 1\nb = 2
E113: a = 1\n b = 2
E116: a = 1\n # b = 2
At least two spaces before inline comment Open
elif op.type == idaapi.o_imm: # Immediate Value
- Read upRead up
- Exclude checks
Separate inline comments by at least two spaces.
An inline comment is a comment on the same line as a statement.
Inline comments should be separated by at least two spaces from the
statement. They should start with a # and a single space.
Each line of a block comment starts with a # and a single space
(unless it is indented text inside the comment).
Okay: x = x + 1 # Increment x
Okay: x = x + 1 # Increment x
Okay: # Block comment
E261: x = x + 1 # Increment x
E262: x = x + 1 #Increment x
E262: x = x + 1 # Increment x
E265: #Block comment
E266: ### Block comment
Indentation is not a multiple of 4 Open
addr = self.as_signed(op.addr)
- Read upRead up
- Exclude checks
Use indent_size (PEP8 says 4) spaces per indentation level.
For really old code that you don't want to mess up, you can continue
to use 8-space tabs.
Okay: a = 1
Okay: if a == 0:\n a = 1
E111: a = 1
E114: # a = 1
Okay: for item in items:\n pass
E112: for item in items:\npass
E115: for item in items:\n# Hi\n pass
Okay: a = 1\nb = 2
E113: a = 1\n b = 2
E116: a = 1\n # b = 2
Indentation is not a multiple of 4 (comment) Open
#~ spoils = [p.copy() for p in call_flow.spoils]
- Read upRead up
- Exclude checks
Use indent_size (PEP8 says 4) spaces per indentation level.
For really old code that you don't want to mess up, you can continue
to use 8-space tabs.
Okay: a = 1
Okay: if a == 0:\n a = 1
E111: a = 1
E114: # a = 1
Okay: for item in items:\n pass
E112: for item in items:\npass
E115: for item in items:\n# Hi\n pass
Okay: a = 1\nb = 2
E113: a = 1\n b = 2
E116: a = 1\n # b = 2
Indentation is not a multiple of 4 (comment) Open
#~ params = [(self.get_value_at(p) or p) for p in params]
- Read upRead up
- Exclude checks
Use indent_size (PEP8 says 4) spaces per indentation level.
For really old code that you don't want to mess up, you can continue
to use 8-space tabs.
Okay: a = 1
Okay: if a == 0:\n a = 1
E111: a = 1
E114: # a = 1
Okay: for item in items:\n pass
E112: for item in items:\npass
E115: for item in items:\n# Hi\n pass
Okay: a = 1\nb = 2
E113: a = 1\n b = 2
E116: a = 1\n # b = 2
Indentation is not a multiple of 4 Open
def get_function_items(self, ea):
- Read upRead up
- Exclude checks
Use indent_size (PEP8 says 4) spaces per indentation level.
For really old code that you don't want to mess up, you can continue
to use 8-space tabs.
Okay: a = 1
Okay: if a == 0:\n a = 1
E111: a = 1
E114: # a = 1
Okay: for item in items:\n pass
E112: for item in items:\npass
E115: for item in items:\n# Hi\n pass
Okay: a = 1\nb = 2
E113: a = 1\n b = 2
E116: a = 1\n # b = 2
Too many leading '#' for block comment Open
### this is wrong until I can fix it.
- Read upRead up
- Exclude checks
Separate inline comments by at least two spaces.
An inline comment is a comment on the same line as a statement.
Inline comments should be separated by at least two spaces from the
statement. They should start with a # and a single space.
Each line of a block comment starts with a # and a single space
(unless it is indented text inside the comment).
Okay: x = x + 1 # Increment x
Okay: x = x + 1 # Increment x
Okay: # Block comment
E261: x = x + 1 # Increment x
E262: x = x + 1 #Increment x
E262: x = x + 1 # Increment x
E265: #Block comment
E266: ### Block comment
Indentation is not a multiple of 4 Open
def get_sib_scale(self, op):
- Read upRead up
- Exclude checks
Use indent_size (PEP8 says 4) spaces per indentation level.
For really old code that you don't want to mess up, you can continue
to use 8-space tabs.
Okay: a = 1
Okay: if a == 0:\n a = 1
E111: a = 1
E114: # a = 1
Okay: for item in items:\n pass
E112: for item in items:\npass
E115: for item in items:\n# Hi\n pass
Okay: a = 1\nb = 2
E113: a = 1\n b = 2
E116: a = 1\n # b = 2
The backslash is redundant between brackets Open
expr = deref_t(add_t(value_t(addr), \
- Read upRead up
- Exclude checks
Avoid explicit line join between brackets.
The preferred way of wrapping long lines is by using Python's
implied line continuation inside parentheses, brackets and braces.
Long lines can be broken over multiple lines by wrapping expressions
in parentheses. These should be used in preference to using a
backslash for line continuation.
E502: aaa = [123, \\n 123]
E502: aaa = ("bbb " \\n "ccc")
Okay: aaa = [123,\n 123]
Okay: aaa = ("bbb "\n "ccc")
Okay: aaa = "bbb " \\n "ccc"
Okay: aaa = 123 # \\
Inline comment should start with '# ' Open
elif op.type == idaapi.o_displ: # Memory Reg [Base Reg + Index Reg + Displacement] phrase+addr
- Read upRead up
- Exclude checks
Separate inline comments by at least two spaces.
An inline comment is a comment on the same line as a statement.
Inline comments should be separated by at least two spaces from the
statement. They should start with a # and a single space.
Each line of a block comment starts with a # and a single space
(unless it is indented text inside the comment).
Okay: x = x + 1 # Increment x
Okay: x = x + 1 # Increment x
Okay: # Block comment
E261: x = x + 1 # Increment x
E262: x = x + 1 #Increment x
E262: x = x + 1 # Increment x
E265: #Block comment
E266: ### Block comment
At least two spaces before inline comment Open
return 0 # eax in ida.
- Read upRead up
- Exclude checks
Separate inline comments by at least two spaces.
An inline comment is a comment on the same line as a statement.
Inline comments should be separated by at least two spaces from the
statement. They should start with a # and a single space.
Each line of a block comment starts with a # and a single space
(unless it is indented text inside the comment).
Okay: x = x + 1 # Increment x
Okay: x = x + 1 # Increment x
Okay: # Block comment
E261: x = x + 1 # Increment x
E262: x = x + 1 #Increment x
E262: x = x + 1 # Increment x
E265: #Block comment
E266: ### Block comment
Line too long (94 > 79 characters) Open
""" return the address of the parent function, given any address inside that function. """
- Read upRead up
- Exclude checks
Limit all lines to a maximum of 79 characters.
There are still many devices around that are limited to 80 character
lines; plus, limiting windows to 80 characters makes it possible to
have several windows side-by-side. The default wrapping on such
devices looks ugly. Therefore, please limit all lines to a maximum
of 79 characters. For flowing long blocks of text (docstrings or
comments), limiting the length to 72 characters is recommended.
Reports error E501.
Indentation is not a multiple of 4 Open
if self.has_sib_byte(op):
- Read upRead up
- Exclude checks
Use indent_size (PEP8 says 4) spaces per indentation level.
For really old code that you don't want to mess up, you can continue
to use 8-space tabs.
Okay: a = 1
Okay: if a == 0:\n a = 1
E111: a = 1
E114: # a = 1
Okay: for item in items:\n pass
E112: for item in items:\npass
E115: for item in items:\n# Hi\n pass
Okay: a = 1\nb = 2
E113: a = 1\n b = 2
E116: a = 1\n # b = 2
At least two spaces before inline comment Open
elif op.type == idaapi.o_displ: # Memory Reg [Base Reg + Index Reg + Displacement] phrase+addr
- Read upRead up
- Exclude checks
Separate inline comments by at least two spaces.
An inline comment is a comment on the same line as a statement.
Inline comments should be separated by at least two spaces from the
statement. They should start with a # and a single space.
Each line of a block comment starts with a # and a single space
(unless it is indented text inside the comment).
Okay: x = x + 1 # Increment x
Okay: x = x + 1 # Increment x
Okay: # Block comment
E261: x = x + 1 # Increment x
E262: x = x + 1 #Increment x
E262: x = x + 1 # Increment x
E265: #Block comment
E266: ### Block comment
Indentation is not a multiple of 4 (comment) Open
#~ return expr, []
- Read upRead up
- Exclude checks
Use indent_size (PEP8 says 4) spaces per indentation level.
For really old code that you don't want to mess up, you can continue
to use 8-space tabs.
Okay: a = 1
Okay: if a == 0:\n a = 1
E111: a = 1
E114: # a = 1
Okay: for item in items:\n pass
E112: for item in items:\npass
E115: for item in items:\n# Hi\n pass
Okay: a = 1\nb = 2
E113: a = 1\n b = 2
E116: a = 1\n # b = 2
Block comment should start with '# ' Open
#~ return expr, []
- Read upRead up
- Exclude checks
Separate inline comments by at least two spaces.
An inline comment is a comment on the same line as a statement.
Inline comments should be separated by at least two spaces from the
statement. They should start with a # and a single space.
Each line of a block comment starts with a # and a single space
(unless it is indented text inside the comment).
Okay: x = x + 1 # Increment x
Okay: x = x + 1 # Increment x
Okay: # Block comment
E261: x = x + 1 # Increment x
E262: x = x + 1 #Increment x
E262: x = x + 1 # Increment x
E265: #Block comment
E266: ### Block comment
Block comment should start with '# ' Open
#~ try:
- Read upRead up
- Exclude checks
Separate inline comments by at least two spaces.
An inline comment is a comment on the same line as a statement.
Inline comments should be separated by at least two spaces from the
statement. They should start with a # and a single space.
Each line of a block comment starts with a # and a single space
(unless it is indented text inside the comment).
Okay: x = x + 1 # Increment x
Okay: x = x + 1 # Increment x
Okay: # Block comment
E261: x = x + 1 # Increment x
E262: x = x + 1 #Increment x
E262: x = x + 1 # Increment x
E265: #Block comment
E266: ### Block comment
Indentation is not a multiple of 4 Open
expr = call_t(fct, None)
- Read upRead up
- Exclude checks
Use indent_size (PEP8 says 4) spaces per indentation level.
For really old code that you don't want to mess up, you can continue
to use 8-space tabs.
Okay: a = 1
Okay: if a == 0:\n a = 1
E111: a = 1
E114: # a = 1
Okay: for item in items:\n pass
E112: for item in items:\npass
E115: for item in items:\n# Hi\n pass
Okay: a = 1\nb = 2
E113: a = 1\n b = 2
E116: a = 1\n # b = 2
Line too long (89 > 79 characters) Open
if type(fct) != value_t or not (idc.GetFunctionFlags(fct.value) & idaapi.FUNC_NORET):
- Read upRead up
- Exclude checks
Limit all lines to a maximum of 79 characters.
There are still many devices around that are limited to 80 character
lines; plus, limiting windows to 80 characters makes it possible to
have several windows side-by-side. The default wrapping on such
devices looks ugly. Therefore, please limit all lines to a maximum
of 79 characters. For flowing long blocks of text (docstrings or
comments), limiting the length to 72 characters is recommended.
Reports error E501.
Indentation is not a multiple of 4 Open
expr = assign_t(self.resultreg.copy(), expr)
- Read upRead up
- Exclude checks
Use indent_size (PEP8 says 4) spaces per indentation level.
For really old code that you don't want to mess up, you can continue
to use 8-space tabs.
Okay: a = 1
Okay: if a == 0:\n a = 1
E111: a = 1
E114: # a = 1
Okay: for item in items:\n pass
E112: for item in items:\npass
E115: for item in items:\n# Hi\n pass
Okay: a = 1\nb = 2
E113: a = 1\n b = 2
E116: a = 1\n # b = 2
Inline comment should start with '# ' Open
if op.type == idaapi.o_reg: # General Register (al,ax,es,ds...) reg
- Read upRead up
- Exclude checks
Separate inline comments by at least two spaces.
An inline comment is a comment on the same line as a statement.
Inline comments should be separated by at least two spaces from the
statement. They should start with a # and a single space.
Each line of a block comment starts with a # and a single space
(unless it is indented text inside the comment).
Okay: x = x + 1 # Increment x
Okay: x = x + 1 # Increment x
Okay: # Block comment
E261: x = x + 1 # Increment x
E262: x = x + 1 #Increment x
E262: x = x + 1 # Increment x
E265: #Block comment
E266: ### Block comment
Line too long (83 > 79 characters) Open
expr = deref_t(value_t(addr, self.address_size), self.get_operand_size(op))
- Read upRead up
- Exclude checks
Limit all lines to a maximum of 79 characters.
There are still many devices around that are limited to 80 character
lines; plus, limiting windows to 80 characters makes it possible to
have several windows side-by-side. The default wrapping on such
devices looks ugly. Therefore, please limit all lines to a maximum
of 79 characters. For flowing long blocks of text (docstrings or
comments), limiting the length to 72 characters is recommended.
Reports error E501.
At least two spaces before inline comment Open
elif op.type == idaapi.o_phrase: # Memory Ref [Base Reg + Index Reg]
- Read upRead up
- Exclude checks
Separate inline comments by at least two spaces.
An inline comment is a comment on the same line as a statement.
Inline comments should be separated by at least two spaces from the
statement. They should start with a # and a single space.
Each line of a block comment starts with a # and a single space
(unless it is indented text inside the comment).
Okay: x = x + 1 # Increment x
Okay: x = x + 1 # Increment x
Okay: # Block comment
E261: x = x + 1 # Increment x
E262: x = x + 1 #Increment x
E262: x = x + 1 # Increment x
E265: #Block comment
E266: ### Block comment
Inline comment should start with '# ' Open
elif op.type == idaapi.o_near: # Immediate Far Address (CODE)
- Read upRead up
- Exclude checks
Separate inline comments by at least two spaces.
An inline comment is a comment on the same line as a statement.
Inline comments should be separated by at least two spaces from the
statement. They should start with a # and a single space.
Each line of a block comment starts with a # and a single space
(unless it is indented text inside the comment).
Okay: x = x + 1 # Increment x
Okay: x = x + 1 # Increment x
Okay: # Block comment
E261: x = x + 1 # Increment x
E262: x = x + 1 #Increment x
E262: x = x + 1 # Increment x
E265: #Block comment
E266: ### Block comment
Line too long (81 > 79 characters) Open
idc.GetFunctionFlags(fct.value) & idaapi.FUNC_THUNK == idaapi.FUNC_THUNK:
- Read upRead up
- Exclude checks
Limit all lines to a maximum of 79 characters.
There are still many devices around that are limited to 80 character
lines; plus, limiting windows to 80 characters makes it possible to
have several windows side-by-side. The default wrapping on such
devices looks ugly. Therefore, please limit all lines to a maximum
of 79 characters. For flowing long blocks of text (docstrings or
comments), limiting the length to 72 characters is recommended.
Reports error E501.
Indentation is not a multiple of 4 Open
print '%x: call to function thunk %x' % (ea, fct.value)
- Read upRead up
- Exclude checks
Use indent_size (PEP8 says 4) spaces per indentation level.
For really old code that you don't want to mess up, you can continue
to use 8-space tabs.
Okay: a = 1
Okay: if a == 0:\n a = 1
E111: a = 1
E114: # a = 1
Okay: for item in items:\n pass
E112: for item in items:\npass
E115: for item in items:\n# Hi\n pass
Okay: a = 1\nb = 2
E113: a = 1\n b = 2
E116: a = 1\n # b = 2
Indentation is not a multiple of 4 Open
expr = call_t(fct, None)
- Read upRead up
- Exclude checks
Use indent_size (PEP8 says 4) spaces per indentation level.
For really old code that you don't want to mess up, you can continue
to use 8-space tabs.
Okay: a = 1
Okay: if a == 0:\n a = 1
E111: a = 1
E114: # a = 1
Okay: for item in items:\n pass
E112: for item in items:\npass
E115: for item in items:\n# Hi\n pass
Okay: a = 1\nb = 2
E113: a = 1\n b = 2
E116: a = 1\n # b = 2
Indentation is not a multiple of 4 (comment) Open
# for all uninitialized register uses in the target function, resolve to a value.
- Read upRead up
- Exclude checks
Use indent_size (PEP8 says 4) spaces per indentation level.
For really old code that you don't want to mess up, you can continue
to use 8-space tabs.
Okay: a = 1
Okay: if a == 0:\n a = 1
E111: a = 1
E114: # a = 1
Okay: for item in items:\n pass
E112: for item in items:\npass
E115: for item in items:\n# Hi\n pass
Okay: a = 1\nb = 2
E113: a = 1\n b = 2
E116: a = 1\n # b = 2
Line too long (85 > 79 characters) Open
""" return False if the function does not return (ExitThread(), exit(), etc). """
- Read upRead up
- Exclude checks
Limit all lines to a maximum of 79 characters.
There are still many devices around that are limited to 80 character
lines; plus, limiting windows to 80 characters makes it possible to
have several windows side-by-side. The default wrapping on such
devices looks ugly. Therefore, please limit all lines to a maximum
of 79 characters. For flowing long blocks of text (docstrings or
comments), limiting the length to 72 characters is recommended.
Reports error E501.
The backslash is redundant between brackets Open
mul_t(regloc_t(reg, self.get_register_size(reg), name=self.get_regname(reg)), \
- Read upRead up
- Exclude checks
Avoid explicit line join between brackets.
The preferred way of wrapping long lines is by using Python's
implied line continuation inside parentheses, brackets and braces.
Long lines can be broken over multiple lines by wrapping expressions
in parentheses. These should be used in preference to using a
backslash for line continuation.
E502: aaa = [123, \\n 123]
E502: aaa = ("bbb " \\n "ccc")
Okay: aaa = [123,\n 123]
Okay: aaa = ("bbb "\n "ccc")
Okay: aaa = "bbb " \\n "ccc"
Okay: aaa = 123 # \\
Inline comment should start with '# ' Open
elif op.type == idaapi.o_phrase: # Memory Ref [Base Reg + Index Reg]
- Read upRead up
- Exclude checks
Separate inline comments by at least two spaces.
An inline comment is a comment on the same line as a statement.
Inline comments should be separated by at least two spaces from the
statement. They should start with a # and a single space.
Each line of a block comment starts with a # and a single space
(unless it is indented text inside the comment).
Okay: x = x + 1 # Increment x
Okay: x = x + 1 # Increment x
Okay: # Block comment
E261: x = x + 1 # Increment x
E262: x = x + 1 #Increment x
E262: x = x + 1 # Increment x
E265: #Block comment
E266: ### Block comment
Indentation is not a multiple of 4 Open
_value = self.as_signed(op.value)
- Read upRead up
- Exclude checks
Use indent_size (PEP8 says 4) spaces per indentation level.
For really old code that you don't want to mess up, you can continue
to use 8-space tabs.
Okay: a = 1
Okay: if a == 0:\n a = 1
E111: a = 1
E114: # a = 1
Okay: for item in items:\n pass
E112: for item in items:\npass
E115: for item in items:\n# Hi\n pass
Okay: a = 1\nb = 2
E113: a = 1\n b = 2
E116: a = 1\n # b = 2
Line too long (109 > 79 characters) Open
raise RuntimeError('%x: unhandled operand type: %s %s' % (ea, repr(op.type), repr(idc.GetOpnd(ea, 1))))
- Read upRead up
- Exclude checks
Limit all lines to a maximum of 79 characters.
There are still many devices around that are limited to 80 character
lines; plus, limiting windows to 80 characters makes it possible to
have several windows side-by-side. The default wrapping on such
devices looks ugly. Therefore, please limit all lines to a maximum
of 79 characters. For flowing long blocks of text (docstrings or
comments), limiting the length to 72 characters is recommended.
Reports error E501.
Indentation is not a multiple of 4 Open
def get_leave_register(self):
- Read upRead up
- Exclude checks
Use indent_size (PEP8 says 4) spaces per indentation level.
For really old code that you don't want to mess up, you can continue
to use 8-space tabs.
Okay: a = 1
Okay: if a == 0:\n a = 1
E111: a = 1
E114: # a = 1
Okay: for item in items:\n pass
E112: for item in items:\npass
E115: for item in items:\n# Hi\n pass
Okay: a = 1\nb = 2
E113: a = 1\n b = 2
E116: a = 1\n # b = 2
Indentation is not a multiple of 4 Open
def has_sib_byte(self, op):
- Read upRead up
- Exclude checks
Use indent_size (PEP8 says 4) spaces per indentation level.
For really old code that you don't want to mess up, you can continue
to use 8-space tabs.
Okay: a = 1
Okay: if a == 0:\n a = 1
E111: a = 1
E114: # a = 1
Okay: for item in items:\n pass
E112: for item in items:\npass
E115: for item in items:\n# Hi\n pass
Okay: a = 1\nb = 2
E113: a = 1\n b = 2
E116: a = 1\n # b = 2
Line too long (92 > 79 characters) Open
""" return an expression representing the 'n'-th operand of the instruction at 'ea'. """
- Read upRead up
- Exclude checks
Limit all lines to a maximum of 79 characters.
There are still many devices around that are limited to 80 character
lines; plus, limiting windows to 80 characters makes it possible to
have several windows side-by-side. The default wrapping on such
devices looks ugly. Therefore, please limit all lines to a maximum
of 79 characters. For flowing long blocks of text (docstrings or
comments), limiting the length to 72 characters is recommended.
Reports error E501.
Indentation is not a multiple of 4 Open
expr = regloc_t(op.reg, sz, name=self.get_regname(op.reg))
- Read upRead up
- Exclude checks
Use indent_size (PEP8 says 4) spaces per indentation level.
For really old code that you don't want to mess up, you can continue
to use 8-space tabs.
Okay: a = 1
Okay: if a == 0:\n a = 1
E111: a = 1
E114: # a = 1
Okay: for item in items:\n pass
E112: for item in items:\npass
E115: for item in items:\n# Hi\n pass
Okay: a = 1\nb = 2
E113: a = 1\n b = 2
E116: a = 1\n # b = 2
At least two spaces before inline comment Open
elif op.type == idaapi.o_mem: # Direct Memory Reference (DATA)
- Read upRead up
- Exclude checks
Separate inline comments by at least two spaces.
An inline comment is a comment on the same line as a statement.
Inline comments should be separated by at least two spaces from the
statement. They should start with a # and a single space.
Each line of a block comment starts with a # and a single space
(unless it is indented text inside the comment).
Okay: x = x + 1 # Increment x
Okay: x = x + 1 # Increment x
Okay: # Block comment
E261: x = x + 1 # Increment x
E262: x = x + 1 #Increment x
E262: x = x + 1 # Increment x
E265: #Block comment
E266: ### Block comment
Indentation is not a multiple of 4 Open
expr = deref_t(expr, self.get_operand_size(op))
- Read upRead up
- Exclude checks
Use indent_size (PEP8 says 4) spaces per indentation level.
For really old code that you don't want to mess up, you can continue
to use 8-space tabs.
Okay: a = 1
Okay: if a == 0:\n a = 1
E111: a = 1
E114: # a = 1
Okay: for item in items:\n pass
E112: for item in items:\npass
E115: for item in items:\n# Hi\n pass
Okay: a = 1\nb = 2
E113: a = 1\n b = 2
E116: a = 1\n # b = 2
Indentation is not a multiple of 4 Open
expr = value_t(_value, self.get_operand_size(op))
- Read upRead up
- Exclude checks
Use indent_size (PEP8 says 4) spaces per indentation level.
For really old code that you don't want to mess up, you can continue
to use 8-space tabs.
Okay: a = 1
Okay: if a == 0:\n a = 1
E111: a = 1
E114: # a = 1
Okay: for item in items:\n pass
E112: for item in items:\npass
E115: for item in items:\n# Hi\n pass
Okay: a = 1\nb = 2
E113: a = 1\n b = 2
E116: a = 1\n # b = 2
Indentation is not a multiple of 4 Open
raise RuntimeError('%x: unhandled operand type: %s %s' % (ea, repr(op.type), repr(idc.GetOpnd(ea, 1))))
- Read upRead up
- Exclude checks
Use indent_size (PEP8 says 4) spaces per indentation level.
For really old code that you don't want to mess up, you can continue
to use 8-space tabs.
Okay: a = 1
Okay: if a == 0:\n a = 1
E111: a = 1
E114: # a = 1
Okay: for item in items:\n pass
E112: for item in items:\npass
E115: for item in items:\n# Hi\n pass
Okay: a = 1\nb = 2
E113: a = 1\n b = 2
E116: a = 1\n # b = 2
Continuation line with same indent as next logical line Open
idc.GetFunctionFlags(fct.value) & idaapi.FUNC_THUNK == idaapi.FUNC_THUNK:
- Read upRead up
- Exclude checks
Continuation lines indentation.
Continuation lines should align wrapped elements either vertically
using Python's implicit line joining inside parentheses, brackets
and braces, or using a hanging indent.
When using a hanging indent these considerations should be applied:
- there should be no arguments on the first line, and
- further indentation should be used to clearly distinguish itself
as a continuation line.
Okay: a = (\n)
E123: a = (\n )
Okay: a = (\n 42)
E121: a = (\n 42)
E122: a = (\n42)
E123: a = (\n 42\n )
E124: a = (24,\n 42\n)
E125: if (\n b):\n pass
E126: a = (\n 42)
E127: a = (24,\n 42)
E128: a = (24,\n 42)
E129: if (a or\n b):\n pass
E131: a = (\n 42\n 24)
Block comment should start with '# ' Open
#~ params = [p.copy() for p in call_flow.uninitialized_uses]
- Read upRead up
- Exclude checks
Separate inline comments by at least two spaces.
An inline comment is a comment on the same line as a statement.
Inline comments should be separated by at least two spaces from the
statement. They should start with a # and a single space.
Each line of a block comment starts with a # and a single space
(unless it is indented text inside the comment).
Okay: x = x + 1 # Increment x
Okay: x = x + 1 # Increment x
Okay: # Block comment
E261: x = x + 1 # Increment x
E262: x = x + 1 #Increment x
E262: x = x + 1 # Increment x
E265: #Block comment
E266: ### Block comment
Line too long (80 > 79 characters) Open
self.registers_32 = ['eax', 'ecx', 'edx', 'ebx', 'esp', 'ebp', 'esi', 'edi']
- Read upRead up
- Exclude checks
Limit all lines to a maximum of 79 characters.
There are still many devices around that are limited to 80 character
lines; plus, limiting windows to 80 characters makes it possible to
have several windows side-by-side. The default wrapping on such
devices looks ugly. Therefore, please limit all lines to a maximum
of 79 characters. For flowing long blocks of text (docstrings or
comments), limiting the length to 72 characters is recommended.
Reports error E501.
Indentation is not a multiple of 4 Open
def get_stack_register(self):
- Read upRead up
- Exclude checks
Use indent_size (PEP8 says 4) spaces per indentation level.
For really old code that you don't want to mess up, you can continue
to use 8-space tabs.
Okay: a = 1
Okay: if a == 0:\n a = 1
E111: a = 1
E114: # a = 1
Okay: for item in items:\n pass
E112: for item in items:\npass
E115: for item in items:\n# Hi\n pass
Okay: a = 1\nb = 2
E113: a = 1\n b = 2
E116: a = 1\n # b = 2
Indentation is not a multiple of 4 Open
return func.startEA
- Read upRead up
- Exclude checks
Use indent_size (PEP8 says 4) spaces per indentation level.
For really old code that you don't want to mess up, you can continue
to use 8-space tabs.
Okay: a = 1
Okay: if a == 0:\n a = 1
E111: a = 1
E114: # a = 1
Okay: for item in items:\n pass
E112: for item in items:\npass
E115: for item in items:\n# Hi\n pass
Okay: a = 1\nb = 2
E113: a = 1\n b = 2
E116: a = 1\n # b = 2
Indentation is not a multiple of 4 Open
return self.registers_32[which]
- Read upRead up
- Exclude checks
Use indent_size (PEP8 says 4) spaces per indentation level.
For really old code that you don't want to mess up, you can continue
to use 8-space tabs.
Okay: a = 1
Okay: if a == 0:\n a = 1
E111: a = 1
E114: # a = 1
Okay: for item in items:\n pass
E112: for item in items:\npass
E115: for item in items:\n# Hi\n pass
Okay: a = 1\nb = 2
E113: a = 1\n b = 2
E116: a = 1\n # b = 2
Continuation line under-indented for visual indent Open
value_t(self.get_sib_scale(op), 8))), self.get_operand_size(op))
- Read upRead up
- Exclude checks
Continuation lines indentation.
Continuation lines should align wrapped elements either vertically
using Python's implicit line joining inside parentheses, brackets
and braces, or using a hanging indent.
When using a hanging indent these considerations should be applied:
- there should be no arguments on the first line, and
- further indentation should be used to clearly distinguish itself
as a continuation line.
Okay: a = (\n)
E123: a = (\n )
Okay: a = (\n 42)
E121: a = (\n 42)
E122: a = (\n42)
E123: a = (\n 42\n )
E124: a = (24,\n 42\n)
E125: if (\n b):\n pass
E126: a = (\n 42)
E127: a = (24,\n 42)
E128: a = (24,\n 42)
E129: if (a or\n b):\n pass
E131: a = (\n 42\n 24)
Indentation is not a multiple of 4 Open
else:
- Read upRead up
- Exclude checks
Use indent_size (PEP8 says 4) spaces per indentation level.
For really old code that you don't want to mess up, you can continue
to use 8-space tabs.
Okay: a = 1
Okay: if a == 0:\n a = 1
E111: a = 1
E114: # a = 1
Okay: for item in items:\n pass
E112: for item in items:\npass
E115: for item in items:\n# Hi\n pass
Okay: a = 1\nb = 2
E113: a = 1\n b = 2
E116: a = 1\n # b = 2
Inline comment should start with '# ' Open
elif op.type == idaapi.o_imm: # Immediate Value
- Read upRead up
- Exclude checks
Separate inline comments by at least two spaces.
An inline comment is a comment on the same line as a statement.
Inline comments should be separated by at least two spaces from the
statement. They should start with a # and a single space.
Each line of a block comment starts with a # and a single space
(unless it is indented text inside the comment).
Okay: x = x + 1 # Increment x
Okay: x = x + 1 # Increment x
Okay: # Block comment
E261: x = x + 1 # Increment x
E262: x = x + 1 #Increment x
E262: x = x + 1 # Increment x
E265: #Block comment
E266: ### Block comment
Block comment should start with '# ' Open
#~ call_flow.reduce_blocks()
- Read upRead up
- Exclude checks
Separate inline comments by at least two spaces.
An inline comment is a comment on the same line as a statement.
Inline comments should be separated by at least two spaces from the
statement. They should start with a # and a single space.
Each line of a block comment starts with a # and a single space
(unless it is indented text inside the comment).
Okay: x = x + 1 # Increment x
Okay: x = x + 1 # Increment x
Okay: # Block comment
E261: x = x + 1 # Increment x
E262: x = x + 1 #Increment x
E262: x = x + 1 # Increment x
E265: #Block comment
E266: ### Block comment
Unexpected indentation (comment) Open
#~ params = [p.copy() for p in call_flow.uninitialized_uses]
- Read upRead up
- Exclude checks
Use indent_size (PEP8 says 4) spaces per indentation level.
For really old code that you don't want to mess up, you can continue
to use 8-space tabs.
Okay: a = 1
Okay: if a == 0:\n a = 1
E111: a = 1
E114: # a = 1
Okay: for item in items:\n pass
E112: for item in items:\npass
E115: for item in items:\n# Hi\n pass
Okay: a = 1\nb = 2
E113: a = 1\n b = 2
E116: a = 1\n # b = 2
At least two spaces before inline comment Open
return 5 # ebp in ida.
- Read upRead up
- Exclude checks
Separate inline comments by at least two spaces.
An inline comment is a comment on the same line as a statement.
Inline comments should be separated by at least two spaces from the
statement. They should start with a # and a single space.
Each line of a block comment starts with a # and a single space
(unless it is indented text inside the comment).
Okay: x = x + 1 # Increment x
Okay: x = x + 1 # Increment x
Okay: # Block comment
E261: x = x + 1 # Increment x
E262: x = x + 1 #Increment x
E262: x = x + 1 # Increment x
E265: #Block comment
E266: ### Block comment
Indentation is not a multiple of 4 Open
def get_function_start(self, ea):
- Read upRead up
- Exclude checks
Use indent_size (PEP8 says 4) spaces per indentation level.
For really old code that you don't want to mess up, you can continue
to use 8-space tabs.
Okay: a = 1
Okay: if a == 0:\n a = 1
E111: a = 1
E114: # a = 1
Okay: for item in items:\n pass
E112: for item in items:\npass
E115: for item in items:\n# Hi\n pass
Okay: a = 1\nb = 2
E113: a = 1\n b = 2
E116: a = 1\n # b = 2
Line too long (89 > 79 characters) Open
mul_t(regloc_t(reg, self.get_register_size(reg), name=self.get_regname(reg)), \
- Read upRead up
- Exclude checks
Limit all lines to a maximum of 79 characters.
There are still many devices around that are limited to 80 character
lines; plus, limiting windows to 80 characters makes it possible to
have several windows side-by-side. The default wrapping on such
devices looks ugly. Therefore, please limit all lines to a maximum
of 79 characters. For flowing long blocks of text (docstrings or
comments), limiting the length to 72 characters is recommended.
Reports error E501.
Block comment should start with '# ' Open
#~ spoils = [p.copy() for p in call_flow.spoils]
- Read upRead up
- Exclude checks
Separate inline comments by at least two spaces.
An inline comment is a comment on the same line as a statement.
Inline comments should be separated by at least two spaces from the
statement. They should start with a # and a single space.
Each line of a block comment starts with a # and a single space
(unless it is indented text inside the comment).
Okay: x = x + 1 # Increment x
Okay: x = x + 1 # Increment x
Okay: # Block comment
E261: x = x + 1 # Increment x
E262: x = x + 1 #Increment x
E262: x = x + 1 # Increment x
E265: #Block comment
E266: ### Block comment
Indentation is not a multiple of 4 Open
spoils = []
- Read upRead up
- Exclude checks
Use indent_size (PEP8 says 4) spaces per indentation level.
For really old code that you don't want to mess up, you can continue
to use 8-space tabs.
Okay: a = 1
Okay: if a == 0:\n a = 1
E111: a = 1
E114: # a = 1
Okay: for item in items:\n pass
E112: for item in items:\npass
E115: for item in items:\n# Hi\n pass
Okay: a = 1\nb = 2
E113: a = 1\n b = 2
E116: a = 1\n # b = 2
Indentation is not a multiple of 4 (comment) Open
#~ call_flow = graph_t(fct_ea, follow_calls = False)
- Read upRead up
- Exclude checks
Use indent_size (PEP8 says 4) spaces per indentation level.
For really old code that you don't want to mess up, you can continue
to use 8-space tabs.
Okay: a = 1
Okay: if a == 0:\n a = 1
E111: a = 1
E114: # a = 1
Okay: for item in items:\n pass
E112: for item in items:\npass
E115: for item in items:\n# Hi\n pass
Okay: a = 1\nb = 2
E113: a = 1\n b = 2
E116: a = 1\n # b = 2
Indentation is not a multiple of 4 Open
else:
- Read upRead up
- Exclude checks
Use indent_size (PEP8 says 4) spaces per indentation level.
For really old code that you don't want to mess up, you can continue
to use 8-space tabs.
Okay: a = 1
Okay: if a == 0:\n a = 1
E111: a = 1
E114: # a = 1
Okay: for item in items:\n pass
E112: for item in items:\npass
E115: for item in items:\n# Hi\n pass
Okay: a = 1\nb = 2
E113: a = 1\n b = 2
E116: a = 1\n # b = 2
Blank line at end of file Open
- Read upRead up
- Exclude checks
Trailing blank lines are superfluous.
Okay: spam(1)
W391: spam(1)\n
However the last line should end with a new line (warning W292).
Indentation is not a multiple of 4 Open
def __init__(self):
- Read upRead up
- Exclude checks
Use indent_size (PEP8 says 4) spaces per indentation level.
For really old code that you don't want to mess up, you can continue
to use 8-space tabs.
Okay: a = 1
Okay: if a == 0:\n a = 1
E111: a = 1
E114: # a = 1
Okay: for item in items:\n pass
E112: for item in items:\npass
E115: for item in items:\n# Hi\n pass
Okay: a = 1\nb = 2
E113: a = 1\n b = 2
E116: a = 1\n # b = 2
Line too long (113 > 79 characters) Open
self.registers_64 = ['rax', 'rcx', 'rdx', 'rbx', 'rsp', 'rbp', 'rsi', 'rdi', 'r8', 'r9', 'r10', 'r11', 'r12']
- Read upRead up
- Exclude checks
Limit all lines to a maximum of 79 characters.
There are still many devices around that are limited to 80 character
lines; plus, limiting windows to 80 characters makes it possible to
have several windows side-by-side. The default wrapping on such
devices looks ugly. Therefore, please limit all lines to a maximum
of 79 characters. For flowing long blocks of text (docstrings or
comments), limiting the length to 72 characters is recommended.
Reports error E501.
Indentation is not a multiple of 4 Open
expr = add_t(expr, value_t(addr, self.address_size))
- Read upRead up
- Exclude checks
Use indent_size (PEP8 says 4) spaces per indentation level.
For really old code that you don't want to mess up, you can continue
to use 8-space tabs.
Okay: a = 1
Okay: if a == 0:\n a = 1
E111: a = 1
E114: # a = 1
Okay: for item in items:\n pass
E112: for item in items:\npass
E115: for item in items:\n# Hi\n pass
Okay: a = 1\nb = 2
E113: a = 1\n b = 2
E116: a = 1\n # b = 2
At least two spaces before inline comment Open
elif op.type == idaapi.o_near: # Immediate Far Address (CODE)
- Read upRead up
- Exclude checks
Separate inline comments by at least two spaces.
An inline comment is a comment on the same line as a statement.
Inline comments should be separated by at least two spaces from the
statement. They should start with a # and a single space.
Each line of a block comment starts with a # and a single space
(unless it is indented text inside the comment).
Okay: x = x + 1 # Increment x
Okay: x = x + 1 # Increment x
Okay: # Block comment
E261: x = x + 1 # Increment x
E262: x = x + 1 #Increment x
E262: x = x + 1 # Increment x
E265: #Block comment
E266: ### Block comment
Unexpected indentation (comment) Open
#~ call_flow.reduce_blocks()
- Read upRead up
- Exclude checks
Use indent_size (PEP8 says 4) spaces per indentation level.
For really old code that you don't want to mess up, you can continue
to use 8-space tabs.
Okay: a = 1
Okay: if a == 0:\n a = 1
E111: a = 1
E114: # a = 1
Okay: for item in items:\n pass
E112: for item in items:\npass
E115: for item in items:\n# Hi\n pass
Okay: a = 1\nb = 2
E113: a = 1\n b = 2
E116: a = 1\n # b = 2
At least two spaces before inline comment Open
return 4 # esp in ida.
- Read upRead up
- Exclude checks
Separate inline comments by at least two spaces.
An inline comment is a comment on the same line as a statement.
Inline comments should be separated by at least two spaces from the
statement. They should start with a # and a single space.
Each line of a block comment starts with a # and a single space
(unless it is indented text inside the comment).
Okay: x = x + 1 # Increment x
Okay: x = x + 1 # Increment x
Okay: # Block comment
E261: x = x + 1 # Increment x
E262: x = x + 1 #Increment x
E262: x = x + 1 # Increment x
E265: #Block comment
E266: ### Block comment
Inline comment should start with '# ' Open
elif op.type == idaapi.o_mem: # Direct Memory Reference (DATA)
- Read upRead up
- Exclude checks
Separate inline comments by at least two spaces.
An inline comment is a comment on the same line as a statement.
Inline comments should be separated by at least two spaces from the
statement. They should start with a # and a single space.
Each line of a block comment starts with a # and a single space
(unless it is indented text inside the comment).
Okay: x = x + 1 # Increment x
Okay: x = x + 1 # Increment x
Okay: # Block comment
E261: x = x + 1 # Increment x
E262: x = x + 1 #Increment x
E262: x = x + 1 # Increment x
E265: #Block comment
E266: ### Block comment
Indentation is not a multiple of 4 Open
expr = deref_t(expr, self.get_operand_size(op))
- Read upRead up
- Exclude checks
Use indent_size (PEP8 says 4) spaces per indentation level.
For really old code that you don't want to mess up, you can continue
to use 8-space tabs.
Okay: a = 1
Okay: if a == 0:\n a = 1
E111: a = 1
E114: # a = 1
Okay: for item in items:\n pass
E112: for item in items:\npass
E115: for item in items:\n# Hi\n pass
Okay: a = 1\nb = 2
E113: a = 1\n b = 2
E116: a = 1\n # b = 2
Line too long (92 > 79 characters) Open
expr = regloc_t(op.reg, self.get_register_size(op.reg), name=self.get_regname(op.reg))
- Read upRead up
- Exclude checks
Limit all lines to a maximum of 79 characters.
There are still many devices around that are limited to 80 character
lines; plus, limiting windows to 80 characters makes it possible to
have several windows side-by-side. The default wrapping on such
devices looks ugly. Therefore, please limit all lines to a maximum
of 79 characters. For flowing long blocks of text (docstrings or
comments), limiting the length to 72 characters is recommended.
Reports error E501.
Indentation is not a multiple of 4 Open
if type(fct) == value_t:
- Read upRead up
- Exclude checks
Use indent_size (PEP8 says 4) spaces per indentation level.
For really old code that you don't want to mess up, you can continue
to use 8-space tabs.
Okay: a = 1
Okay: if a == 0:\n a = 1
E111: a = 1
E114: # a = 1
Okay: for item in items:\n pass
E112: for item in items:\npass
E115: for item in items:\n# Hi\n pass
Okay: a = 1\nb = 2
E113: a = 1\n b = 2
E116: a = 1\n # b = 2
Block comment should start with '# ' Open
#~ except:
- Read upRead up
- Exclude checks
Separate inline comments by at least two spaces.
An inline comment is a comment on the same line as a statement.
Inline comments should be separated by at least two spaces from the
statement. They should start with a # and a single space.
Each line of a block comment starts with a # and a single space
(unless it is indented text inside the comment).
Okay: x = x + 1 # Increment x
Okay: x = x + 1 # Increment x
Okay: # Block comment
E261: x = x + 1 # Increment x
E262: x = x + 1 #Increment x
E262: x = x + 1 # Increment x
E265: #Block comment
E266: ### Block comment
Indentation is not a multiple of 4 Open
def function_does_return(self, ea):
- Read upRead up
- Exclude checks
Use indent_size (PEP8 says 4) spaces per indentation level.
For really old code that you don't want to mess up, you can continue
to use 8-space tabs.
Okay: a = 1
Okay: if a == 0:\n a = 1
E111: a = 1
E114: # a = 1
Okay: for item in items:\n pass
E112: for item in items:\npass
E115: for item in items:\n# Hi\n pass
Okay: a = 1\nb = 2
E113: a = 1\n b = 2
E116: a = 1\n # b = 2
Indentation is not a multiple of 4 Open
return 0x100+value
- Read upRead up
- Exclude checks
Use indent_size (PEP8 says 4) spaces per indentation level.
For really old code that you don't want to mess up, you can continue
to use 8-space tabs.
Okay: a = 1
Okay: if a == 0:\n a = 1
E111: a = 1
E114: # a = 1
Okay: for item in items:\n pass
E112: for item in items:\npass
E115: for item in items:\n# Hi\n pass
Okay: a = 1\nb = 2
E113: a = 1\n b = 2
E116: a = 1\n # b = 2
Indentation is not a multiple of 4 Open
def get_sib_scaled_index_reg(self, op):
- Read upRead up
- Exclude checks
Use indent_size (PEP8 says 4) spaces per indentation level.
For really old code that you don't want to mess up, you can continue
to use 8-space tabs.
Okay: a = 1
Okay: if a == 0:\n a = 1
E111: a = 1
E114: # a = 1
Okay: for item in items:\n pass
E112: for item in items:\npass
E115: for item in items:\n# Hi\n pass
Okay: a = 1\nb = 2
E113: a = 1\n b = 2
E116: a = 1\n # b = 2
Line too long (81 > 79 characters) Open
if op.type == idaapi.o_reg: # General Register (al,ax,es,ds...) reg
- Read upRead up
- Exclude checks
Limit all lines to a maximum of 79 characters.
There are still many devices around that are limited to 80 character
lines; plus, limiting windows to 80 characters makes it possible to
have several windows side-by-side. The default wrapping on such
devices looks ugly. Therefore, please limit all lines to a maximum
of 79 characters. For flowing long blocks of text (docstrings or
comments), limiting the length to 72 characters is recommended.
Reports error E501.
Indentation is not a multiple of 4 Open
sz = self.get_operand_size(op)
- Read upRead up
- Exclude checks
Use indent_size (PEP8 says 4) spaces per indentation level.
For really old code that you don't want to mess up, you can continue
to use 8-space tabs.
Okay: a = 1
Okay: if a == 0:\n a = 1
E111: a = 1
E114: # a = 1
Okay: for item in items:\n pass
E112: for item in items:\npass
E115: for item in items:\n# Hi\n pass
Okay: a = 1\nb = 2
E113: a = 1\n b = 2
E116: a = 1\n # b = 2
Indentation is not a multiple of 4 Open
expr = regloc_t(op.reg, self.get_register_size(op.reg), name=self.get_regname(op.reg))
- Read upRead up
- Exclude checks
Use indent_size (PEP8 says 4) spaces per indentation level.
For really old code that you don't want to mess up, you can continue
to use 8-space tabs.
Okay: a = 1
Okay: if a == 0:\n a = 1
E111: a = 1
E114: # a = 1
Okay: for item in items:\n pass
E112: for item in items:\npass
E115: for item in items:\n# Hi\n pass
Okay: a = 1\nb = 2
E113: a = 1\n b = 2
E116: a = 1\n # b = 2
Indentation is not a multiple of 4 Open
def get_ea_name(self, ea):
- Read upRead up
- Exclude checks
Use indent_size (PEP8 says 4) spaces per indentation level.
For really old code that you don't want to mess up, you can continue
to use 8-space tabs.
Okay: a = 1
Okay: if a == 0:\n a = 1
E111: a = 1
E114: # a = 1
Okay: for item in items:\n pass
E112: for item in items:\npass
E115: for item in items:\n# Hi\n pass
Okay: a = 1\nb = 2
E113: a = 1\n b = 2
E116: a = 1\n # b = 2
Indentation is not a multiple of 4 Open
addr = self.as_signed(op.addr)
- Read upRead up
- Exclude checks
Use indent_size (PEP8 says 4) spaces per indentation level.
For really old code that you don't want to mess up, you can continue
to use 8-space tabs.
Okay: a = 1
Okay: if a == 0:\n a = 1
E111: a = 1
E114: # a = 1
Okay: for item in items:\n pass
E112: for item in items:\npass
E115: for item in items:\n# Hi\n pass
Okay: a = 1\nb = 2
E113: a = 1\n b = 2
E116: a = 1\n # b = 2
Indentation is not a multiple of 4 Open
expr = value_t(addr, self.get_operand_size(op))
- Read upRead up
- Exclude checks
Use indent_size (PEP8 says 4) spaces per indentation level.
For really old code that you don't want to mess up, you can continue
to use 8-space tabs.
Okay: a = 1
Okay: if a == 0:\n a = 1
E111: a = 1
E114: # a = 1
Okay: for item in items:\n pass
E112: for item in items:\npass
E115: for item in items:\n# Hi\n pass
Okay: a = 1\nb = 2
E113: a = 1\n b = 2
E116: a = 1\n # b = 2
Block comment should start with '# ' Open
#~ call_flow = graph_t(fct_ea, follow_calls = False)
- Read upRead up
- Exclude checks
Separate inline comments by at least two spaces.
An inline comment is a comment on the same line as a statement.
Inline comments should be separated by at least two spaces from the
statement. They should start with a # and a single space.
Each line of a block comment starts with a # and a single space
(unless it is indented text inside the comment).
Okay: x = x + 1 # Increment x
Okay: x = x + 1 # Increment x
Okay: # Block comment
E261: x = x + 1 # Increment x
E262: x = x + 1 #Increment x
E262: x = x + 1 # Increment x
E265: #Block comment
E266: ### Block comment
Unexpected indentation (comment) Open
#~ spoils = [p.copy() for p in call_flow.spoils]
- Read upRead up
- Exclude checks
Use indent_size (PEP8 says 4) spaces per indentation level.
For really old code that you don't want to mess up, you can continue
to use 8-space tabs.
Okay: a = 1
Okay: if a == 0:\n a = 1
E111: a = 1
E114: # a = 1
Okay: for item in items:\n pass
E112: for item in items:\npass
E115: for item in items:\n# Hi\n pass
Okay: a = 1\nb = 2
E113: a = 1\n b = 2
E116: a = 1\n # b = 2
Block comment should start with '# ' Open
#~ params = [(self.get_value_at(p) or p) for p in params]
- Read upRead up
- Exclude checks
Separate inline comments by at least two spaces.
An inline comment is a comment on the same line as a statement.
Inline comments should be separated by at least two spaces from the
statement. They should start with a # and a single space.
Each line of a block comment starts with a # and a single space
(unless it is indented text inside the comment).
Okay: x = x + 1 # Increment x
Okay: x = x + 1 # Increment x
Okay: # Block comment
E261: x = x + 1 # Increment x
E262: x = x + 1 #Increment x
E262: x = x + 1 # Increment x
E265: #Block comment
E266: ### Block comment
Indentation is not a multiple of 4 Open
def get_string(self, ea):
- Read upRead up
- Exclude checks
Use indent_size (PEP8 says 4) spaces per indentation level.
For really old code that you don't want to mess up, you can continue
to use 8-space tabs.
Okay: a = 1
Okay: if a == 0:\n a = 1
E111: a = 1
E114: # a = 1
Okay: for item in items:\n pass
E112: for item in items:\npass
E115: for item in items:\n# Hi\n pass
Okay: a = 1\nb = 2
E113: a = 1\n b = 2
E116: a = 1\n # b = 2
Indentation is not a multiple of 4 Open
def get_mnemonic(self, ea):
- Read upRead up
- Exclude checks
Use indent_size (PEP8 says 4) spaces per indentation level.
For really old code that you don't want to mess up, you can continue
to use 8-space tabs.
Okay: a = 1
Okay: if a == 0:\n a = 1
E111: a = 1
E114: # a = 1
Okay: for item in items:\n pass
E112: for item in items:\npass
E115: for item in items:\n# Hi\n pass
Okay: a = 1\nb = 2
E113: a = 1\n b = 2
E116: a = 1\n # b = 2
Indentation is not a multiple of 4 Open
def as_byte_value(self, value):
- Read upRead up
- Exclude checks
Use indent_size (PEP8 says 4) spaces per indentation level.
For really old code that you don't want to mess up, you can continue
to use 8-space tabs.
Okay: a = 1
Okay: if a == 0:\n a = 1
E111: a = 1
E114: # a = 1
Okay: for item in items:\n pass
E112: for item in items:\npass
E115: for item in items:\n# Hi\n pass
Okay: a = 1\nb = 2
E113: a = 1\n b = 2
E116: a = 1\n # b = 2
Line too long (92 > 79 characters) Open
expr = regloc_t(op.reg, self.get_register_size(op.reg), name=self.get_regname(op.reg))
- Read upRead up
- Exclude checks
Limit all lines to a maximum of 79 characters.
There are still many devices around that are limited to 80 character
lines; plus, limiting windows to 80 characters makes it possible to
have several windows side-by-side. The default wrapping on such
devices looks ugly. Therefore, please limit all lines to a maximum
of 79 characters. For flowing long blocks of text (docstrings or
comments), limiting the length to 72 characters is recommended.
Reports error E501.
Block comment should start with '# ' Open
#~ if self.follow_calls and type(fct) == value_t:
- Read upRead up
- Exclude checks
Separate inline comments by at least two spaces.
An inline comment is a comment on the same line as a statement.
Inline comments should be separated by at least two spaces from the
statement. They should start with a # and a single space.
Each line of a block comment starts with a # and a single space
(unless it is indented text inside the comment).
Okay: x = x + 1 # Increment x
Okay: x = x + 1 # Increment x
Okay: # Block comment
E261: x = x + 1 # Increment x
E262: x = x + 1 #Increment x
E262: x = x + 1 # Increment x
E265: #Block comment
E266: ### Block comment
Expected 2 blank lines, found 1 Open
class disassembler(object):
- Read upRead up
- Exclude checks
Separate top-level function and class definitions with two blank lines.
Method definitions inside a class are separated by a single blank
line.
Extra blank lines may be used (sparingly) to separate groups of
related functions. Blank lines may be omitted between a bunch of
related one-liners (e.g. a set of dummy implementations).
Use blank lines in functions, sparingly, to indicate logical
sections.
Okay: def a():\n pass\n\n\ndef b():\n pass
Okay: def a():\n pass\n\n\nasync def b():\n pass
Okay: def a():\n pass\n\n\n# Foo\n# Bar\n\ndef b():\n pass
Okay: default = 1\nfoo = 1
Okay: classify = 1\nfoo = 1
E301: class Foo:\n b = 0\n def bar():\n pass
E302: def a():\n pass\n\ndef b(n):\n pass
E302: def a():\n pass\n\nasync def b(n):\n pass
E303: def a():\n pass\n\n\n\ndef b(n):\n pass
E303: def a():\n\n\n\n pass
E304: @decorator\n\ndef a():\n pass
E305: def a():\n pass\na()
E306: def a():\n def b():\n pass\n def c():\n pass
Indentation is not a multiple of 4 Open
def get_result_register(self):
- Read upRead up
- Exclude checks
Use indent_size (PEP8 says 4) spaces per indentation level.
For really old code that you don't want to mess up, you can continue
to use 8-space tabs.
Okay: a = 1
Okay: if a == 0:\n a = 1
E111: a = 1
E114: # a = 1
Okay: for item in items:\n pass
E112: for item in items:\npass
E115: for item in items:\n# Hi\n pass
Okay: a = 1\nb = 2
E113: a = 1\n b = 2
E116: a = 1\n # b = 2
Line too long (99 > 79 characters) Open
elif op.type == idaapi.o_displ: # Memory Reg [Base Reg + Index Reg + Displacement] phrase+addr
- Read upRead up
- Exclude checks
Limit all lines to a maximum of 79 characters.
There are still many devices around that are limited to 80 character
lines; plus, limiting windows to 80 characters makes it possible to
have several windows side-by-side. The default wrapping on such
devices looks ugly. Therefore, please limit all lines to a maximum
of 79 characters. For flowing long blocks of text (docstrings or
comments), limiting the length to 72 characters is recommended.
Reports error E501.
Indentation is not a multiple of 4 (comment) Open
#~ if self.follow_calls and type(fct) == value_t:
- Read upRead up
- Exclude checks
Use indent_size (PEP8 says 4) spaces per indentation level.
For really old code that you don't want to mess up, you can continue
to use 8-space tabs.
Okay: a = 1
Okay: if a == 0:\n a = 1
E111: a = 1
E114: # a = 1
Okay: for item in items:\n pass
E112: for item in items:\npass
E115: for item in items:\n# Hi\n pass
Okay: a = 1\nb = 2
E113: a = 1\n b = 2
E116: a = 1\n # b = 2
Unexpected indentation (comment) Open
#~ call_flow = graph_t(fct_ea, follow_calls = False)
- Read upRead up
- Exclude checks
Use indent_size (PEP8 says 4) spaces per indentation level.
For really old code that you don't want to mess up, you can continue
to use 8-space tabs.
Okay: a = 1
Okay: if a == 0:\n a = 1
E111: a = 1
E114: # a = 1
Okay: for item in items:\n pass
E112: for item in items:\npass
E115: for item in items:\n# Hi\n pass
Okay: a = 1\nb = 2
E113: a = 1\n b = 2
E116: a = 1\n # b = 2
Indentation is not a multiple of 4 (comment) Open
#~ call_flow.reduce_blocks()
- Read upRead up
- Exclude checks
Use indent_size (PEP8 says 4) spaces per indentation level.
For really old code that you don't want to mess up, you can continue
to use 8-space tabs.
Okay: a = 1
Okay: if a == 0:\n a = 1
E111: a = 1
E114: # a = 1
Okay: for item in items:\n pass
E112: for item in items:\npass
E115: for item in items:\n# Hi\n pass
Okay: a = 1\nb = 2
E113: a = 1\n b = 2
E116: a = 1\n # b = 2
Indentation is not a multiple of 4 Open
def get_regname(self, which):
- Read upRead up
- Exclude checks
Use indent_size (PEP8 says 4) spaces per indentation level.
For really old code that you don't want to mess up, you can continue
to use 8-space tabs.
Okay: a = 1
Okay: if a == 0:\n a = 1
E111: a = 1
E114: # a = 1
Okay: for item in items:\n pass
E112: for item in items:\npass
E115: for item in items:\n# Hi\n pass
Okay: a = 1\nb = 2
E113: a = 1\n b = 2
E116: a = 1\n # b = 2
Indentation is not a multiple of 4 Open
def get_operand_size(self, op):
- Read upRead up
- Exclude checks
Use indent_size (PEP8 says 4) spaces per indentation level.
For really old code that you don't want to mess up, you can continue
to use 8-space tabs.
Okay: a = 1
Okay: if a == 0:\n a = 1
E111: a = 1
E114: # a = 1
Okay: for item in items:\n pass
E112: for item in items:\npass
E115: for item in items:\n# Hi\n pass
Okay: a = 1\nb = 2
E113: a = 1\n b = 2
E116: a = 1\n # b = 2
Indentation is not a multiple of 4 Open
def get_operand_expression(self, ea, n):
- Read upRead up
- Exclude checks
Use indent_size (PEP8 says 4) spaces per indentation level.
For really old code that you don't want to mess up, you can continue
to use 8-space tabs.
Okay: a = 1
Okay: if a == 0:\n a = 1
E111: a = 1
E114: # a = 1
Okay: for item in items:\n pass
E112: for item in items:\npass
E115: for item in items:\n# Hi\n pass
Okay: a = 1\nb = 2
E113: a = 1\n b = 2
E116: a = 1\n # b = 2
Continuation line under-indented for visual indent Open
mul_t(regloc_t(reg, self.get_register_size(reg), name=self.get_regname(reg)), \
- Read upRead up
- Exclude checks
Continuation lines indentation.
Continuation lines should align wrapped elements either vertically
using Python's implicit line joining inside parentheses, brackets
and braces, or using a hanging indent.
When using a hanging indent these considerations should be applied:
- there should be no arguments on the first line, and
- further indentation should be used to clearly distinguish itself
as a continuation line.
Okay: a = (\n)
E123: a = (\n )
Okay: a = (\n 42)
E121: a = (\n 42)
E122: a = (\n42)
E123: a = (\n 42\n )
E124: a = (24,\n 42\n)
E125: if (\n b):\n pass
E126: a = (\n 42)
E127: a = (24,\n 42)
E128: a = (24,\n 42)
E129: if (a or\n b):\n pass
E131: a = (\n 42\n 24)
Indentation is not a multiple of 4 Open
def get_call_expression(self, ea):
- Read upRead up
- Exclude checks
Use indent_size (PEP8 says 4) spaces per indentation level.
For really old code that you don't want to mess up, you can continue
to use 8-space tabs.
Okay: a = 1
Okay: if a == 0:\n a = 1
E111: a = 1
E114: # a = 1
Okay: for item in items:\n pass
E112: for item in items:\npass
E115: for item in items:\n# Hi\n pass
Okay: a = 1\nb = 2
E113: a = 1\n b = 2
E116: a = 1\n # b = 2
Indentation is not a multiple of 4 (comment) Open
#~ params = [p.copy() for p in call_flow.uninitialized_uses]
- Read upRead up
- Exclude checks
Use indent_size (PEP8 says 4) spaces per indentation level.
For really old code that you don't want to mess up, you can continue
to use 8-space tabs.
Okay: a = 1
Okay: if a == 0:\n a = 1
E111: a = 1
E114: # a = 1
Okay: for item in items:\n pass
E112: for item in items:\npass
E115: for item in items:\n# Hi\n pass
Okay: a = 1\nb = 2
E113: a = 1\n b = 2
E116: a = 1\n # b = 2
Line too long (87 > 79 characters) Open
# for all uninitialized register uses in the target function, resolve to a value.
- Read upRead up
- Exclude checks
Limit all lines to a maximum of 79 characters.
There are still many devices around that are limited to 80 character
lines; plus, limiting windows to 80 characters makes it possible to
have several windows side-by-side. The default wrapping on such
devices looks ugly. Therefore, please limit all lines to a maximum
of 79 characters. For flowing long blocks of text (docstrings or
comments), limiting the length to 72 characters is recommended.
Reports error E501.