Sign upLogin

Maroc-OS/decompiler

View on GitHub
Star
src/objdump-decompiler.py

Summary

Maintainability
A
2 hrs
Test Coverage

Similar blocks of code found in 2 locations. Consider refactoring.
Open

    if self.arch == 'x86':
      md = capstone.Cs(capstone.CS_ARCH_X86, capstone.CS_MODE_32)
      dis = host.dis.available_disassemblers['capstone'].create(md, input)
Severity: Major
Found in src/objdump-decompiler.py and 1 other location - About 1 hr to fix
src/objdump-decompiler.py on lines 41..43

Duplicated Code

Duplicated code can lead to software that is hard to understand and difficult to change. The Don't Repeat Yourself (DRY) principle states:

Every piece of knowledge must have a single, unambiguous, authoritative representation within a system.

When you violate DRY, bugs and maintenance problems are sure to follow. Duplicated code has a tendency to both continue to replicate and also to diverge (leaving bugs as two similar implementations differ in subtle ways).

Tuning

This issue has a mass of 39.

We set useful threshold defaults for the languages we support but you may want to adjust these settings based on your project guidelines.

The threshold configuration represents the minimum mass a code block must have to be analyzed for duplication. The lower the threshold, the more fine-grained the comparison.

If the engine is too easily reporting duplication, try raising the threshold. If you suspect that the engine isn't catching enough duplication, try lowering the threshold. The best setting tends to differ from language to language.

See codeclimate-duplication's documentation for more information about tuning the mass threshold in your .codeclimate.yml.

Refactorings

Further Reading

Similar blocks of code found in 2 locations. Consider refactoring.
Open

    elif self.arch == 'x86-64':
      md = capstone.Cs(capstone.CS_ARCH_X86, capstone.CS_MODE_64)
      dis = host.dis.available_disassemblers['capstone'].create(md, input)
Severity: Major
Found in src/objdump-decompiler.py and 1 other location - About 1 hr to fix
src/objdump-decompiler.py on lines 38..40

Duplicated Code

Duplicated code can lead to software that is hard to understand and difficult to change. The Don't Repeat Yourself (DRY) principle states:

Every piece of knowledge must have a single, unambiguous, authoritative representation within a system.

When you violate DRY, bugs and maintenance problems are sure to follow. Duplicated code has a tendency to both continue to replicate and also to diverge (leaving bugs as two similar implementations differ in subtle ways).

Tuning

This issue has a mass of 39.

We set useful threshold defaults for the languages we support but you may want to adjust these settings based on your project guidelines.

The threshold configuration represents the minimum mass a code block must have to be analyzed for duplication. The lower the threshold, the more fine-grained the comparison.

If the engine is too easily reporting duplication, try raising the threshold. If you suspect that the engine isn't catching enough duplication, try lowering the threshold. The best setting tends to differ from language to language.

See codeclimate-duplication's documentation for more information about tuning the mass threshold in your .codeclimate.yml.

Refactorings

Further Reading

Indentation is not a multiple of 4
Open

      md = capstone.Cs(capstone.CS_ARCH_X86, capstone.CS_MODE_32)
Severity: Minor
Found in src/objdump-decompiler.py by pep8

Use indent_size (PEP8 says 4) spaces per indentation level.

For really old code that you don't want to mess up, you can continue
to use 8-space tabs.

Okay: a = 1
Okay: if a == 0:\n    a = 1
E111:   a = 1
E114:   # a = 1

Okay: for item in items:\n    pass
E112: for item in items:\npass
E115: for item in items:\n# Hi\n    pass

Okay: a = 1\nb = 2
E113: a = 1\n    b = 2
E116: a = 1\n    # b = 2

Indentation is not a multiple of 4
Open

  def print_function(self, function):
Severity: Minor
Found in src/objdump-decompiler.py by pep8

Use indent_size (PEP8 says 4) spaces per indentation level.

For really old code that you don't want to mess up, you can continue
to use 8-space tabs.

Okay: a = 1
Okay: if a == 0:\n    a = 1
E111:   a = 1
E114:   # a = 1

Okay: for item in items:\n    pass
E112: for item in items:\npass
E115: for item in items:\n# Hi\n    pass

Okay: a = 1\nb = 2
E113: a = 1\n    b = 2
E116: a = 1\n    # b = 2

Indentation is not a multiple of 4
Open

      dis = host.dis.available_disassemblers['capstone'].create(md, input)
Severity: Minor
Found in src/objdump-decompiler.py by pep8

Use indent_size (PEP8 says 4) spaces per indentation level.

For really old code that you don't want to mess up, you can continue
to use 8-space tabs.

Okay: a = 1
Okay: if a == 0:\n    a = 1
E111:   a = 1
E114:   # a = 1

Okay: for item in items:\n    pass
E112: for item in items:\npass
E115: for item in items:\n# Hi\n    pass

Okay: a = 1\nb = 2
E113: a = 1\n    b = 2
E116: a = 1\n    # b = 2

Indentation is not a multiple of 4
Open

      raise RuntimeError('no such architecture: %s' % (self.arch, ))
Severity: Minor
Found in src/objdump-decompiler.py by pep8

Use indent_size (PEP8 says 4) spaces per indentation level.

For really old code that you don't want to mess up, you can continue
to use 8-space tabs.

Okay: a = 1
Okay: if a == 0:\n    a = 1
E111:   a = 1
E114:   # a = 1

Okay: for item in items:\n    pass
E112: for item in items:\npass
E115: for item in items:\n# Hi\n    pass

Okay: a = 1\nb = 2
E113: a = 1\n    b = 2
E116: a = 1\n    # b = 2

Indentation is not a multiple of 4
Open

      if not line:
Severity: Minor
Found in src/objdump-decompiler.py by pep8

Use indent_size (PEP8 says 4) spaces per indentation level.

For really old code that you don't want to mess up, you can continue
to use 8-space tabs.

Okay: a = 1
Okay: if a == 0:\n    a = 1
E111:   a = 1
E114:   # a = 1

Okay: for item in items:\n    pass
E112: for item in items:\npass
E115: for item in items:\n# Hi\n    pass

Okay: a = 1\nb = 2
E113: a = 1\n    b = 2
E116: a = 1\n    # b = 2

Indentation is not a multiple of 4
Open

  def decompile_function(self, name):
Severity: Minor
Found in src/objdump-decompiler.py by pep8

Use indent_size (PEP8 says 4) spaces per indentation level.

For really old code that you don't want to mess up, you can continue
to use 8-space tabs.

Okay: a = 1
Okay: if a == 0:\n    a = 1
E111:   a = 1
E114:   # a = 1

Okay: for item in items:\n    pass
E112: for item in items:\npass
E115: for item in items:\n# Hi\n    pass

Okay: a = 1\nb = 2
E113: a = 1\n    b = 2
E116: a = 1\n    # b = 2

Continuation line under-indented for visual indent
Open

                     help='name of target function')
Severity: Minor
Found in src/objdump-decompiler.py by pep8

Continuation lines indentation.

Continuation lines should align wrapped elements either vertically
using Python's implicit line joining inside parentheses, brackets
and braces, or using a hanging indent.

When using a hanging indent these considerations should be applied:
- there should be no arguments on the first line, and
- further indentation should be used to clearly distinguish itself
  as a continuation line.

Okay: a = (\n)
E123: a = (\n    )

Okay: a = (\n    42)
E121: a = (\n   42)
E122: a = (\n42)
E123: a = (\n    42\n    )
E124: a = (24,\n     42\n)
E125: if (\n    b):\n    pass
E126: a = (\n        42)
E127: a = (24,\n      42)
E128: a = (24,\n    42)
E129: if (a or\n    b):\n    pass
E131: a = (\n    42\n 24)

Indentation is not a multiple of 4
Open

  steps = p.decompilation_steps
Severity: Minor
Found in src/objdump-decompiler.py by pep8

Use indent_size (PEP8 says 4) spaces per indentation level.

For really old code that you don't want to mess up, you can continue
to use 8-space tabs.

Okay: a = 1
Okay: if a == 0:\n    a = 1
E111:   a = 1
E114:   # a = 1

Okay: for item in items:\n    pass
E112: for item in items:\npass
E115: for item in items:\n# Hi\n    pass

Okay: a = 1\nb = 2
E113: a = 1\n    b = 2
E116: a = 1\n    # b = 2

Indentation is not a multiple of 4
Open

      except KeyboardInterrupt:
Severity: Minor
Found in src/objdump-decompiler.py by pep8

Use indent_size (PEP8 says 4) spaces per indentation level.

For really old code that you don't want to mess up, you can continue
to use 8-space tabs.

Okay: a = 1
Okay: if a == 0:\n    a = 1
E111:   a = 1
E114:   # a = 1

Okay: for item in items:\n    pass
E112: for item in items:\npass
E115: for item in items:\n# Hi\n    pass

Okay: a = 1\nb = 2
E113: a = 1\n    b = 2
E116: a = 1\n    # b = 2

Indentation is not a multiple of 4
Open

  def decompile_all(self):
Severity: Minor
Found in src/objdump-decompiler.py by pep8

Use indent_size (PEP8 says 4) spaces per indentation level.

For really old code that you don't want to mess up, you can continue
to use 8-space tabs.

Okay: a = 1
Okay: if a == 0:\n    a = 1
E111:   a = 1
E114:   # a = 1

Okay: for item in items:\n    pass
E112: for item in items:\npass
E115: for item in items:\n# Hi\n    pass

Okay: a = 1\nb = 2
E113: a = 1\n    b = 2
E116: a = 1\n    # b = 2

Continuation line under-indented for visual indent
Open

                     default='decompiled',
Severity: Minor
Found in src/objdump-decompiler.py by pep8

Continuation lines indentation.

Continuation lines should align wrapped elements either vertically
using Python's implicit line joining inside parentheses, brackets
and braces, or using a hanging indent.

When using a hanging indent these considerations should be applied:
- there should be no arguments on the first line, and
- further indentation should be used to clearly distinguish itself
  as a continuation line.

Okay: a = (\n)
E123: a = (\n    )

Okay: a = (\n    42)
E121: a = (\n   42)
E122: a = (\n42)
E123: a = (\n    42\n    )
E124: a = (24,\n     42\n)
E125: if (\n    b):\n    pass
E126: a = (\n        42)
E127: a = (24,\n      42)
E128: a = (24,\n    42)
E129: if (a or\n    b):\n    pass
E131: a = (\n    42\n 24)

Line too long (94 > 79 characters)
Open

    hex = re.findall(r'^\s*[a-f0-9]*:((?:[\s\t](?:[a-f0-9]{2}))*)', input, flags=re.MULTILINE)
Severity: Minor
Found in src/objdump-decompiler.py by pep8

Limit all lines to a maximum of 79 characters.

There are still many devices around that are limited to 80 character
lines; plus, limiting windows to 80 characters makes it possible to
have several windows side-by-side.  The default wrapping on such
devices looks ugly.  Therefore, please limit all lines to a maximum
of 79 characters. For flowing long blocks of text (docstrings or
comments), limiting the length to 72 characters is recommended.

Reports error E501.

Indentation is not a multiple of 4
Open

      md = capstone.Cs(capstone.CS_ARCH_X86, capstone.CS_MODE_64)
Severity: Minor
Found in src/objdump-decompiler.py by pep8

Use indent_size (PEP8 says 4) spaces per indentation level.

For really old code that you don't want to mess up, you can continue
to use 8-space tabs.

Okay: a = 1
Okay: if a == 0:\n    a = 1
E111:   a = 1
E114:   # a = 1

Okay: for item in items:\n    pass
E112: for item in items:\npass
E115: for item in items:\n# Hi\n    pass

Okay: a = 1\nb = 2
E113: a = 1\n    b = 2
E116: a = 1\n    # b = 2

Continuation line under-indented for visual indent
Open

                     help='show decompilation step (default: decompiled)')
Severity: Minor
Found in src/objdump-decompiler.py by pep8

Continuation lines indentation.

Continuation lines should align wrapped elements either vertically
using Python's implicit line joining inside parentheses, brackets
and braces, or using a hanging indent.

When using a hanging indent these considerations should be applied:
- there should be no arguments on the first line, and
- further indentation should be used to clearly distinguish itself
  as a continuation line.

Okay: a = (\n)
E123: a = (\n    )

Okay: a = (\n    42)
E121: a = (\n   42)
E122: a = (\n42)
E123: a = (\n    42\n    )
E124: a = (24,\n     42\n)
E125: if (\n    b):\n    pass
E126: a = (\n        42)
E127: a = (24,\n      42)
E128: a = (24,\n    42)
E129: if (a or\n    b):\n    pass
E131: a = (\n    42\n 24)

Indentation is not a multiple of 4
Open

  def objdump_load(self, data):
Severity: Minor
Found in src/objdump-decompiler.py by pep8

Use indent_size (PEP8 says 4) spaces per indentation level.

For really old code that you don't want to mess up, you can continue
to use 8-space tabs.

Okay: a = 1
Okay: if a == 0:\n    a = 1
E111:   a = 1
E114:   # a = 1

Okay: for item in items:\n    pass
E112: for item in items:\npass
E115: for item in items:\n# Hi\n    pass

Okay: a = 1\nb = 2
E113: a = 1\n    b = 2
E116: a = 1\n    # b = 2

Indentation is not a multiple of 4
Open

  p.callconv = args.callconv
Severity: Minor
Found in src/objdump-decompiler.py by pep8

Use indent_size (PEP8 says 4) spaces per indentation level.

For really old code that you don't want to mess up, you can continue
to use 8-space tabs.

Okay: a = 1
Okay: if a == 0:\n    a = 1
E111:   a = 1
E114:   # a = 1

Okay: for item in items:\n    pass
E112: for item in items:\npass
E115: for item in items:\n# Hi\n    pass

Okay: a = 1\nb = 2
E113: a = 1\n    b = 2
E116: a = 1\n    # b = 2

Line too long (136 > 79 characters)
Open

    parsed = re.findall(r'([a-f0-9]+) \<([^\>]+)\>\:\n((?:\s+[a-f0-9]+:(?:[\s\t](?:[a-f0-9]{2}))+[^\n]*)*\n)', data, flags=re.MULTILINE)
Severity: Minor
Found in src/objdump-decompiler.py by pep8

Limit all lines to a maximum of 79 characters.

There are still many devices around that are limited to 80 character
lines; plus, limiting windows to 80 characters makes it possible to
have several windows side-by-side.  The default wrapping on such
devices looks ugly.  Therefore, please limit all lines to a maximum
of 79 characters. For flowing long blocks of text (docstrings or
comments), limiting the length to 72 characters is recommended.

Reports error E501.

Indentation is not a multiple of 4
Open

  elif args.step in steps:
Severity: Minor
Found in src/objdump-decompiler.py by pep8

Use indent_size (PEP8 says 4) spaces per indentation level.

For really old code that you don't want to mess up, you can continue
to use 8-space tabs.

Okay: a = 1
Okay: if a == 0:\n    a = 1
E111:   a = 1
E114:   # a = 1

Okay: for item in items:\n    pass
E112: for item in items:\npass
E115: for item in items:\n# Hi\n    pass

Okay: a = 1\nb = 2
E113: a = 1\n    b = 2
E116: a = 1\n    # b = 2

Missing whitespace after ','
Open

    functions = {o[1]: Function(address=int(o[0], 16),name=o[1],text=o[2],hex=self.objdump_to_hex(o[2])) for o in parsed}
Severity: Minor
Found in src/objdump-decompiler.py by pep8

Each comma, semicolon or colon should be followed by whitespace.

Okay: [a, b]
Okay: (3,)
Okay: a[1:4]
Okay: a[:4]
Okay: a[1:]
Okay: a[1:4:2]
E231: ['a','b']
E231: foo(bar,baz)
E231: [{'a':'b'}]

Indentation is not a multiple of 4
Open

      print '  %-30s %s' % (name, steps[name].__doc__)
Severity: Minor
Found in src/objdump-decompiler.py by pep8

Use indent_size (PEP8 says 4) spaces per indentation level.

For really old code that you don't want to mess up, you can continue
to use 8-space tabs.

Okay: a = 1
Okay: if a == 0:\n    a = 1
E111:   a = 1
E114:   # a = 1

Okay: for item in items:\n    pass
E112: for item in items:\npass
E115: for item in items:\n# Hi\n    pass

Okay: a = 1\nb = 2
E113: a = 1\n    b = 2
E116: a = 1\n    # b = 2

Missing whitespace after ','
Open

    functions = {o[1]: Function(address=int(o[0], 16),name=o[1],text=o[2],hex=self.objdump_to_hex(o[2])) for o in parsed}
Severity: Minor
Found in src/objdump-decompiler.py by pep8

Each comma, semicolon or colon should be followed by whitespace.

Okay: [a, b]
Okay: (3,)
Okay: a[1:4]
Okay: a[:4]
Okay: a[1:]
Okay: a[1:4:2]
E231: ['a','b']
E231: foo(bar,baz)
E231: [{'a':'b'}]

Indentation is not a multiple of 4
Open

  def decompilation_steps(self):
Severity: Minor
Found in src/objdump-decompiler.py by pep8

Use indent_size (PEP8 says 4) spaces per indentation level.

For really old code that you don't want to mess up, you can continue
to use 8-space tabs.

Okay: a = 1
Okay: if a == 0:\n    a = 1
E111:   a = 1
E114:   # a = 1

Okay: for item in items:\n    pass
E112: for item in items:\npass
E115: for item in items:\n# Hi\n    pass

Okay: a = 1\nb = 2
E113: a = 1\n    b = 2
E116: a = 1\n    # b = 2

Indentation is not a multiple of 4
Open

  parser.add_argument('--step', dest='step', action='store',
Severity: Minor
Found in src/objdump-decompiler.py by pep8

Use indent_size (PEP8 says 4) spaces per indentation level.

For really old code that you don't want to mess up, you can continue
to use 8-space tabs.

Okay: a = 1
Okay: if a == 0:\n    a = 1
E111:   a = 1
E114:   # a = 1

Okay: for item in items:\n    pass
E112: for item in items:\npass
E115: for item in items:\n# Hi\n    pass

Okay: a = 1\nb = 2
E113: a = 1\n    b = 2
E116: a = 1\n    # b = 2

Continuation line under-indented for visual indent
Open

                     default=None,
Severity: Minor
Found in src/objdump-decompiler.py by pep8

Continuation lines indentation.

Continuation lines should align wrapped elements either vertically
using Python's implicit line joining inside parentheses, brackets
and braces, or using a hanging indent.

When using a hanging indent these considerations should be applied:
- there should be no arguments on the first line, and
- further indentation should be used to clearly distinguish itself
  as a continuation line.

Okay: a = (\n)
E123: a = (\n    )

Okay: a = (\n    42)
E121: a = (\n   42)
E122: a = (\n42)
E123: a = (\n    42\n    )
E124: a = (24,\n     42\n)
E125: if (\n    b):\n    pass
E126: a = (\n        42)
E127: a = (24,\n      42)
E128: a = (24,\n    42)
E129: if (a or\n    b):\n    pass
E131: a = (\n    42\n 24)

Indentation is not a multiple of 4
Open

  if not args.function:
Severity: Minor
Found in src/objdump-decompiler.py by pep8

Use indent_size (PEP8 says 4) spaces per indentation level.

For really old code that you don't want to mess up, you can continue
to use 8-space tabs.

Okay: a = 1
Okay: if a == 0:\n    a = 1
E111:   a = 1
E114:   # a = 1

Okay: for item in items:\n    pass
E112: for item in items:\npass
E115: for item in items:\n# Hi\n    pass

Okay: a = 1\nb = 2
E113: a = 1\n    b = 2
E116: a = 1\n    # b = 2

Indentation is not a multiple of 4
Open

  def decompile_until(self, input):
Severity: Minor
Found in src/objdump-decompiler.py by pep8

Use indent_size (PEP8 says 4) spaces per indentation level.

For really old code that you don't want to mess up, you can continue
to use 8-space tabs.

Okay: a = 1
Okay: if a == 0:\n    a = 1
E111:   a = 1
E114:   # a = 1

Okay: for item in items:\n    pass
E112: for item in items:\npass
E115: for item in items:\n# Hi\n    pass

Okay: a = 1\nb = 2
E113: a = 1\n    b = 2
E116: a = 1\n    # b = 2

Line too long (83 > 79 characters)
Open

    print '%x %s (%s)' % (function.address, function.name, self.step_until.__doc__)
Severity: Minor
Found in src/objdump-decompiler.py by pep8

Limit all lines to a maximum of 79 characters.

There are still many devices around that are limited to 80 character
lines; plus, limiting windows to 80 characters makes it possible to
have several windows side-by-side.  The default wrapping on such
devices looks ugly.  Therefore, please limit all lines to a maximum
of 79 characters. For flowing long blocks of text (docstrings or
comments), limiting the length to 72 characters is recommended.

Reports error E501.

Indentation is not a multiple of 4
Open

  p.arch = args.arch
Severity: Minor
Found in src/objdump-decompiler.py by pep8

Use indent_size (PEP8 says 4) spaces per indentation level.

For really old code that you don't want to mess up, you can continue
to use 8-space tabs.

Okay: a = 1
Okay: if a == 0:\n    a = 1
E111:   a = 1
E114:   # a = 1

Okay: for item in items:\n    pass
E112: for item in items:\npass
E115: for item in items:\n# Hi\n    pass

Okay: a = 1\nb = 2
E113: a = 1\n    b = 2
E116: a = 1\n    # b = 2

Indentation is not a multiple of 4
Open

      try:
Severity: Minor
Found in src/objdump-decompiler.py by pep8

Use indent_size (PEP8 says 4) spaces per indentation level.

For really old code that you don't want to mess up, you can continue
to use 8-space tabs.

Okay: a = 1
Okay: if a == 0:\n    a = 1
E111:   a = 1
E114:   # a = 1

Okay: for item in items:\n    pass
E112: for item in items:\npass
E115: for item in items:\n# Hi\n    pass

Okay: a = 1\nb = 2
E113: a = 1\n    b = 2
E116: a = 1\n    # b = 2

Expected 2 blank lines after class or function definition, found 1
Open

if __name__ == '__main__':
Severity: Minor
Found in src/objdump-decompiler.py by pep8

Separate top-level function and class definitions with two blank lines.

Method definitions inside a class are separated by a single blank
line.

Extra blank lines may be used (sparingly) to separate groups of
related functions.  Blank lines may be omitted between a bunch of
related one-liners (e.g. a set of dummy implementations).

Use blank lines in functions, sparingly, to indicate logical
sections.

Okay: def a():\n    pass\n\n\ndef b():\n    pass
Okay: def a():\n    pass\n\n\nasync def b():\n    pass
Okay: def a():\n    pass\n\n\n# Foo\n# Bar\n\ndef b():\n    pass
Okay: default = 1\nfoo = 1
Okay: classify = 1\nfoo = 1

E301: class Foo:\n    b = 0\n    def bar():\n        pass
E302: def a():\n    pass\n\ndef b(n):\n    pass
E302: def a():\n    pass\n\nasync def b(n):\n    pass
E303: def a():\n    pass\n\n\n\ndef b(n):\n    pass
E303: def a():\n\n\n\n    pass
E304: @decorator\n\ndef a():\n    pass
E305: def a():\n    pass\na()
E306: def a():\n    def b():\n        pass\n    def c():\n        pass

Continuation line under-indented for visual indent
Open

                     default='x86',
Severity: Minor
Found in src/objdump-decompiler.py by pep8

Continuation lines indentation.

Continuation lines should align wrapped elements either vertically
using Python's implicit line joining inside parentheses, brackets
and braces, or using a hanging indent.

When using a hanging indent these considerations should be applied:
- there should be no arguments on the first line, and
- further indentation should be used to clearly distinguish itself
  as a continuation line.

Okay: a = (\n)
E123: a = (\n    )

Okay: a = (\n    42)
E121: a = (\n   42)
E122: a = (\n42)
E123: a = (\n    42\n    )
E124: a = (24,\n     42\n)
E125: if (\n    b):\n    pass
E126: a = (\n        42)
E127: a = (24,\n      42)
E128: a = (24,\n    42)
E129: if (a or\n    b):\n    pass
E131: a = (\n    42\n 24)

Indentation is not a multiple of 4
Open

  def objdump_to_hex(self, input):
Severity: Minor
Found in src/objdump-decompiler.py by pep8

Use indent_size (PEP8 says 4) spaces per indentation level.

For really old code that you don't want to mess up, you can continue
to use 8-space tabs.

Okay: a = 1
Okay: if a == 0:\n    a = 1
E111:   a = 1
E114:   # a = 1

Okay: for item in items:\n    pass
E112: for item in items:\npass
E115: for item in items:\n# Hi\n    pass

Okay: a = 1\nb = 2
E113: a = 1\n    b = 2
E116: a = 1\n    # b = 2

Indentation is not a multiple of 4
Open

      self.print_function(function)
Severity: Minor
Found in src/objdump-decompiler.py by pep8

Use indent_size (PEP8 says 4) spaces per indentation level.

For really old code that you don't want to mess up, you can continue
to use 8-space tabs.

Okay: a = 1
Okay: if a == 0:\n    a = 1
E111:   a = 1
E114:   # a = 1

Okay: for item in items:\n    pass
E112: for item in items:\npass
E115: for item in items:\n# Hi\n    pass

Okay: a = 1\nb = 2
E113: a = 1\n    b = 2
E116: a = 1\n    # b = 2

Indentation is not a multiple of 4
Open

  elif args.function in p.functions:
Severity: Minor
Found in src/objdump-decompiler.py by pep8

Use indent_size (PEP8 says 4) spaces per indentation level.

For really old code that you don't want to mess up, you can continue
to use 8-space tabs.

Okay: a = 1
Okay: if a == 0:\n    a = 1
E111:   a = 1
E114:   # a = 1

Okay: for item in items:\n    pass
E112: for item in items:\npass
E115: for item in items:\n# Hi\n    pass

Okay: a = 1\nb = 2
E113: a = 1\n    b = 2
E116: a = 1\n    # b = 2

Indentation is not a multiple of 4
Open

  else:
Severity: Minor
Found in src/objdump-decompiler.py by pep8

Use indent_size (PEP8 says 4) spaces per indentation level.

For really old code that you don't want to mess up, you can continue
to use 8-space tabs.

Okay: a = 1
Okay: if a == 0:\n    a = 1
E111:   a = 1
E114:   # a = 1

Okay: for item in items:\n    pass
E112: for item in items:\npass
E115: for item in items:\n# Hi\n    pass

Okay: a = 1\nb = 2
E113: a = 1\n    b = 2
E116: a = 1\n    # b = 2

Missing whitespace after ','
Open

    functions = {o[1]: Function(address=int(o[0], 16),name=o[1],text=o[2],hex=self.objdump_to_hex(o[2])) for o in parsed}
Severity: Minor
Found in src/objdump-decompiler.py by pep8

Each comma, semicolon or colon should be followed by whitespace.

Okay: [a, b]
Okay: (3,)
Okay: a[1:4]
Okay: a[:4]
Okay: a[1:]
Okay: a[1:4:2]
E231: ['a','b']
E231: foo(bar,baz)
E231: [{'a':'b'}]

Indentation is not a multiple of 4
Open

      if m:
Severity: Minor
Found in src/objdump-decompiler.py by pep8

Use indent_size (PEP8 says 4) spaces per indentation level.

For really old code that you don't want to mess up, you can continue
to use 8-space tabs.

Okay: a = 1
Okay: if a == 0:\n    a = 1
E111:   a = 1
E114:   # a = 1

Okay: for item in items:\n    pass
E112: for item in items:\npass
E115: for item in items:\n# Hi\n    pass

Okay: a = 1\nb = 2
E113: a = 1\n    b = 2
E116: a = 1\n    # b = 2

Continuation line under-indented for visual indent
Open

                     help='assembly architecture (x86, x86-64)')
Severity: Minor
Found in src/objdump-decompiler.py by pep8

Continuation lines indentation.

Continuation lines should align wrapped elements either vertically
using Python's implicit line joining inside parentheses, brackets
and braces, or using a hanging indent.

When using a hanging indent these considerations should be applied:
- there should be no arguments on the first line, and
- further indentation should be used to clearly distinguish itself
  as a continuation line.

Okay: a = (\n)
E123: a = (\n    )

Okay: a = (\n    42)
E121: a = (\n   42)
E122: a = (\n42)
E123: a = (\n    42\n    )
E124: a = (24,\n     42\n)
E125: if (\n    b):\n    pass
E126: a = (\n        42)
E127: a = (24,\n      42)
E128: a = (24,\n    42)
E129: if (a or\n    b):\n    pass
E131: a = (\n    42\n 24)

Indentation is not a multiple of 4
Open

  parser.add_argument('--fct', dest='function', action='store',
Severity: Minor
Found in src/objdump-decompiler.py by pep8

Use indent_size (PEP8 says 4) spaces per indentation level.

For really old code that you don't want to mess up, you can continue
to use 8-space tabs.

Okay: a = 1
Okay: if a == 0:\n    a = 1
E111:   a = 1
E114:   # a = 1

Okay: for item in items:\n    pass
E112: for item in items:\npass
E115: for item in items:\n# Hi\n    pass

Okay: a = 1\nb = 2
E113: a = 1\n    b = 2
E116: a = 1\n    # b = 2

Indentation is not a multiple of 4
Open

  sys.exit(0)
Severity: Minor
Found in src/objdump-decompiler.py by pep8

Use indent_size (PEP8 says 4) spaces per indentation level.

For really old code that you don't want to mess up, you can continue
to use 8-space tabs.

Okay: a = 1
Okay: if a == 0:\n    a = 1
E111:   a = 1
E114:   # a = 1

Okay: for item in items:\n    pass
E112: for item in items:\npass
E115: for item in items:\n# Hi\n    pass

Okay: a = 1\nb = 2
E113: a = 1\n    b = 2
E116: a = 1\n    # b = 2

Indentation is not a multiple of 4
Open

      print(''.join([str(o) for o in output.c.tokenizer(dec.function).tokens]))
Severity: Minor
Found in src/objdump-decompiler.py by pep8

Use indent_size (PEP8 says 4) spaces per indentation level.

For really old code that you don't want to mess up, you can continue
to use 8-space tabs.

Okay: a = 1
Okay: if a == 0:\n    a = 1
E111:   a = 1
E114:   # a = 1

Okay: for item in items:\n    pass
E112: for item in items:\npass
E115: for item in items:\n# Hi\n    pass

Okay: a = 1\nb = 2
E113: a = 1\n    b = 2
E116: a = 1\n    # b = 2

Indentation is not a multiple of 4
Open

      print 'Failed to decompile: %s' % repr(e)
Severity: Minor
Found in src/objdump-decompiler.py by pep8

Use indent_size (PEP8 says 4) spaces per indentation level.

For really old code that you don't want to mess up, you can continue
to use 8-space tabs.

Okay: a = 1
Okay: if a == 0:\n    a = 1
E111:   a = 1
E114:   # a = 1

Okay: for item in items:\n    pass
E112: for item in items:\npass
E115: for item in items:\n# Hi\n    pass

Okay: a = 1\nb = 2
E113: a = 1\n    b = 2
E116: a = 1\n    # b = 2

Indentation is not a multiple of 4
Open

  parser.add_argument('--conv', dest='callconv', action='store',
Severity: Minor
Found in src/objdump-decompiler.py by pep8

Use indent_size (PEP8 says 4) spaces per indentation level.

For really old code that you don't want to mess up, you can continue
to use 8-space tabs.

Okay: a = 1
Okay: if a == 0:\n    a = 1
E111:   a = 1
E114:   # a = 1

Okay: for item in items:\n    pass
E112: for item in items:\npass
E115: for item in items:\n# Hi\n    pass

Okay: a = 1\nb = 2
E113: a = 1\n    b = 2
E116: a = 1\n    # b = 2

Indentation is not a multiple of 4
Open

  else:
Severity: Minor
Found in src/objdump-decompiler.py by pep8

Use indent_size (PEP8 says 4) spaces per indentation level.

For really old code that you don't want to mess up, you can continue
to use 8-space tabs.

Okay: a = 1
Okay: if a == 0:\n    a = 1
E111:   a = 1
E114:   # a = 1

Okay: for item in items:\n    pass
E112: for item in items:\npass
E115: for item in items:\n# Hi\n    pass

Okay: a = 1\nb = 2
E113: a = 1\n    b = 2
E116: a = 1\n    # b = 2

Indentation is not a multiple of 4
Open

  @property
Severity: Minor
Found in src/objdump-decompiler.py by pep8

Use indent_size (PEP8 says 4) spaces per indentation level.

For really old code that you don't want to mess up, you can continue
to use 8-space tabs.

Okay: a = 1
Okay: if a == 0:\n    a = 1
E111:   a = 1
E114:   # a = 1

Okay: for item in items:\n    pass
E112: for item in items:\npass
E115: for item in items:\n# Hi\n    pass

Okay: a = 1\nb = 2
E113: a = 1\n    b = 2
E116: a = 1\n    # b = 2

Indentation is not a multiple of 4
Open

  def read_stdin(self):
Severity: Minor
Found in src/objdump-decompiler.py by pep8

Use indent_size (PEP8 says 4) spaces per indentation level.

For really old code that you don't want to mess up, you can continue
to use 8-space tabs.

Okay: a = 1
Okay: if a == 0:\n    a = 1
E111:   a = 1
E114:   # a = 1

Okay: for item in items:\n    pass
E112: for item in items:\npass
E115: for item in items:\n# Hi\n    pass

Okay: a = 1\nb = 2
E113: a = 1\n    b = 2
E116: a = 1\n    # b = 2

Expected 2 blank lines, found 1
Open

class Cmdline(object):
Severity: Minor
Found in src/objdump-decompiler.py by pep8

Separate top-level function and class definitions with two blank lines.

Method definitions inside a class are separated by a single blank
line.

Extra blank lines may be used (sparingly) to separate groups of
related functions.  Blank lines may be omitted between a bunch of
related one-liners (e.g. a set of dummy implementations).

Use blank lines in functions, sparingly, to indicate logical
sections.

Okay: def a():\n    pass\n\n\ndef b():\n    pass
Okay: def a():\n    pass\n\n\nasync def b():\n    pass
Okay: def a():\n    pass\n\n\n# Foo\n# Bar\n\ndef b():\n    pass
Okay: default = 1\nfoo = 1
Okay: classify = 1\nfoo = 1

E301: class Foo:\n    b = 0\n    def bar():\n        pass
E302: def a():\n    pass\n\ndef b(n):\n    pass
E302: def a():\n    pass\n\nasync def b(n):\n    pass
E303: def a():\n    pass\n\n\n\ndef b(n):\n    pass
E303: def a():\n\n\n\n    pass
E304: @decorator\n\ndef a():\n    pass
E305: def a():\n    pass\na()
E306: def a():\n    def b():\n        pass\n    def c():\n        pass

Indentation is not a multiple of 4
Open

  def __init__(self):
Severity: Minor
Found in src/objdump-decompiler.py by pep8

Use indent_size (PEP8 says 4) spaces per indentation level.

For really old code that you don't want to mess up, you can continue
to use 8-space tabs.

Okay: a = 1
Okay: if a == 0:\n    a = 1
E111:   a = 1
E114:   # a = 1

Okay: for item in items:\n    pass
E112: for item in items:\npass
E115: for item in items:\n# Hi\n    pass

Okay: a = 1\nb = 2
E113: a = 1\n    b = 2
E116: a = 1\n    # b = 2

Line too long (121 > 79 characters)
Open

    functions = {o[1]: Function(address=int(o[0], 16),name=o[1],text=o[2],hex=self.objdump_to_hex(o[2])) for o in parsed}
Severity: Minor
Found in src/objdump-decompiler.py by pep8

Limit all lines to a maximum of 79 characters.

There are still many devices around that are limited to 80 character
lines; plus, limiting windows to 80 characters makes it possible to
have several windows side-by-side.  The default wrapping on such
devices looks ugly.  Therefore, please limit all lines to a maximum
of 79 characters. For flowing long blocks of text (docstrings or
comments), limiting the length to 72 characters is recommended.

Reports error E501.

Indentation is not a multiple of 4
Open

      traceback.print_exc()
Severity: Minor
Found in src/objdump-decompiler.py by pep8

Use indent_size (PEP8 says 4) spaces per indentation level.

For really old code that you don't want to mess up, you can continue
to use 8-space tabs.

Okay: a = 1
Okay: if a == 0:\n    a = 1
E111:   a = 1
E114:   # a = 1

Okay: for item in items:\n    pass
E112: for item in items:\npass
E115: for item in items:\n# Hi\n    pass

Okay: a = 1\nb = 2
E113: a = 1\n    b = 2
E116: a = 1\n    # b = 2

Indentation is not a multiple of 4
Open

  parser.add_argument('--arch', dest='arch', action='store',
Severity: Minor
Found in src/objdump-decompiler.py by pep8

Use indent_size (PEP8 says 4) spaces per indentation level.

For really old code that you don't want to mess up, you can continue
to use 8-space tabs.

Okay: a = 1
Okay: if a == 0:\n    a = 1
E111:   a = 1
E114:   # a = 1

Okay: for item in items:\n    pass
E112: for item in items:\npass
E115: for item in items:\n# Hi\n    pass

Okay: a = 1\nb = 2
E113: a = 1\n    b = 2
E116: a = 1\n    # b = 2

Indentation is not a multiple of 4
Open

  args = parser.parse_args()
Severity: Minor
Found in src/objdump-decompiler.py by pep8

Use indent_size (PEP8 says 4) spaces per indentation level.

For really old code that you don't want to mess up, you can continue
to use 8-space tabs.

Okay: a = 1
Okay: if a == 0:\n    a = 1
E111:   a = 1
E114:   # a = 1

Okay: for item in items:\n    pass
E112: for item in items:\npass
E115: for item in items:\n# Hi\n    pass

Okay: a = 1\nb = 2
E113: a = 1\n    b = 2
E116: a = 1\n    # b = 2

Indentation is not a multiple of 4
Open

      dis = host.dis.available_disassemblers['capstone'].create(md, input)
Severity: Minor
Found in src/objdump-decompiler.py by pep8

Use indent_size (PEP8 says 4) spaces per indentation level.

For really old code that you don't want to mess up, you can continue
to use 8-space tabs.

Okay: a = 1
Okay: if a == 0:\n    a = 1
E111:   a = 1
E114:   # a = 1

Okay: for item in items:\n    pass
E112: for item in items:\npass
E115: for item in items:\n# Hi\n    pass

Okay: a = 1\nb = 2
E113: a = 1\n    b = 2
E116: a = 1\n    # b = 2

Indentation is not a multiple of 4
Open

      data += line
Severity: Minor
Found in src/objdump-decompiler.py by pep8

Use indent_size (PEP8 says 4) spaces per indentation level.

For really old code that you don't want to mess up, you can continue
to use 8-space tabs.

Okay: a = 1
Okay: if a == 0:\n    a = 1
E111:   a = 1
E114:   # a = 1

Okay: for item in items:\n    pass
E112: for item in items:\npass
E115: for item in items:\n# Hi\n    pass

Okay: a = 1\nb = 2
E113: a = 1\n    b = 2
E116: a = 1\n    # b = 2

Indentation is not a multiple of 4
Open

      dec = self.decompile_until(function.hex)
Severity: Minor
Found in src/objdump-decompiler.py by pep8

Use indent_size (PEP8 says 4) spaces per indentation level.

For really old code that you don't want to mess up, you can continue
to use 8-space tabs.

Okay: a = 1
Okay: if a == 0:\n    a = 1
E111:   a = 1
E114:   # a = 1

Okay: for item in items:\n    pass
E112: for item in items:\npass
E115: for item in items:\n# Hi\n    pass

Okay: a = 1\nb = 2
E113: a = 1\n    b = 2
E116: a = 1\n    # b = 2

Indentation is not a multiple of 4
Open

  p = Cmdline()
Severity: Minor
Found in src/objdump-decompiler.py by pep8

Use indent_size (PEP8 says 4) spaces per indentation level.

For really old code that you don't want to mess up, you can continue
to use 8-space tabs.

Okay: a = 1
Okay: if a == 0:\n    a = 1
E111:   a = 1
E114:   # a = 1

Okay: for item in items:\n    pass
E112: for item in items:\npass
E115: for item in items:\n# Hi\n    pass

Okay: a = 1\nb = 2
E113: a = 1\n    b = 2
E116: a = 1\n    # b = 2

Continuation line under-indented for visual indent
Open

                     default='cdecl',
Severity: Minor
Found in src/objdump-decompiler.py by pep8

Continuation lines indentation.

Continuation lines should align wrapped elements either vertically
using Python's implicit line joining inside parentheses, brackets
and braces, or using a hanging indent.

When using a hanging indent these considerations should be applied:
- there should be no arguments on the first line, and
- further indentation should be used to clearly distinguish itself
  as a continuation line.

Okay: a = (\n)
E123: a = (\n    )

Okay: a = (\n    42)
E121: a = (\n   42)
E122: a = (\n42)
E123: a = (\n    42\n    )
E124: a = (24,\n     42\n)
E125: if (\n    b):\n    pass
E126: a = (\n        42)
E127: a = (24,\n      42)
E128: a = (24,\n    42)
E129: if (a or\n    b):\n    pass
E131: a = (\n    42\n 24)

Continuation line under-indented for visual indent
Open

                     help='calling convention (cdecl, )')
Severity: Minor
Found in src/objdump-decompiler.py by pep8

Continuation lines indentation.

Continuation lines should align wrapped elements either vertically
using Python's implicit line joining inside parentheses, brackets
and braces, or using a hanging indent.

When using a hanging indent these considerations should be applied:
- there should be no arguments on the first line, and
- further indentation should be used to clearly distinguish itself
  as a continuation line.

Okay: a = (\n)
E123: a = (\n    )

Okay: a = (\n    42)
E121: a = (\n   42)
E122: a = (\n42)
E123: a = (\n    42\n    )
E124: a = (24,\n     42\n)
E125: if (\n    b):\n    pass
E126: a = (\n        42)
E127: a = (24,\n      42)
E128: a = (24,\n    42)
E129: if (a or\n    b):\n    pass
E131: a = (\n    42\n 24)

Indentation is not a multiple of 4
Open

  if args.step.isdigit():
Severity: Minor
Found in src/objdump-decompiler.py by pep8

Use indent_size (PEP8 says 4) spaces per indentation level.

For really old code that you don't want to mess up, you can continue
to use 8-space tabs.

Okay: a = 1
Okay: if a == 0:\n    a = 1
E111:   a = 1
E114:   # a = 1

Okay: for item in items:\n    pass
E112: for item in items:\npass
E115: for item in items:\n# Hi\n    pass

Okay: a = 1\nb = 2
E113: a = 1\n    b = 2
E116: a = 1\n    # b = 2

Indentation is not a multiple of 4
Open

      m = re.match(r'step_(.*)', subclass.__name__)
Severity: Minor
Found in src/objdump-decompiler.py by pep8

Use indent_size (PEP8 says 4) spaces per indentation level.

For really old code that you don't want to mess up, you can continue
to use 8-space tabs.

Okay: a = 1
Okay: if a == 0:\n    a = 1
E111:   a = 1
E114:   # a = 1

Okay: for item in items:\n    pass
E112: for item in items:\npass
E115: for item in items:\n# Hi\n    pass

Okay: a = 1\nb = 2
E113: a = 1\n    b = 2
E116: a = 1\n    # b = 2

Indentation is not a multiple of 4
Open

  parser = argparse.ArgumentParser(description='Decompiler')
Severity: Minor
Found in src/objdump-decompiler.py by pep8

Use indent_size (PEP8 says 4) spaces per indentation level.

For really old code that you don't want to mess up, you can continue
to use 8-space tabs.

Okay: a = 1
Okay: if a == 0:\n    a = 1
E111:   a = 1
E114:   # a = 1

Okay: for item in items:\n    pass
E112: for item in items:\npass
E115: for item in items:\n# Hi\n    pass

Okay: a = 1\nb = 2
E113: a = 1\n    b = 2
E116: a = 1\n    # b = 2

There are no issues that match your filters.

Category
Status