Sign upLogin

MediaMath/t1-python

View on GitHub
Star

Showing 132 of 132 total issues

Similar blocks of code found in 2 locations. Consider refactoring.
Open

            if environment=='production':
                grant_type = "http://auth0.com/oauth/grant-type/password-realm"
                realm="MediaMathActiveDirectory"
                scope = "openid"
            else:
Severity: Major
Found in terminalone/connection.py and 1 other location - About 2 hrs to fix
terminalone/connection.py on lines 139..149

Duplicated Code

Duplicated code can lead to software that is hard to understand and difficult to change. The Don't Repeat Yourself (DRY) principle states:

Every piece of knowledge must have a single, unambiguous, authoritative representation within a system.

When you violate DRY, bugs and maintenance problems are sure to follow. Duplicated code has a tendency to both continue to replicate and also to diverge (leaving bugs as two similar implementations differ in subtle ways).

Tuning

This issue has a mass of 56.

We set useful threshold defaults for the languages we support but you may want to adjust these settings based on your project guidelines.

The threshold configuration represents the minimum mass a code block must have to be analyzed for duplication. The lower the threshold, the more fine-grained the comparison.

If the engine is too easily reporting duplication, try raising the threshold. If you suspect that the engine isn't catching enough duplication, try lowering the threshold. The best setting tends to differ from language to language.

See codeclimate-duplication's documentation for more information about tuning the mass threshold in your .codeclimate.yml.

Refactorings

Further Reading

Similar blocks of code found in 2 locations. Consider refactoring.
Open

        elif username.find("@") != -1:
            if environment=='production':
                scope="openid"
                realm="T1DB-Production"
                grant_type = "http://auth0.com/oauth/grant-type/password-realm"
Severity: Major
Found in terminalone/connection.py and 1 other location - About 2 hrs to fix
terminalone/connection.py on lines 128..137

Duplicated Code

Duplicated code can lead to software that is hard to understand and difficult to change. The Don't Repeat Yourself (DRY) principle states:

Every piece of knowledge must have a single, unambiguous, authoritative representation within a system.

When you violate DRY, bugs and maintenance problems are sure to follow. Duplicated code has a tendency to both continue to replicate and also to diverge (leaving bugs as two similar implementations differ in subtle ways).

Tuning

This issue has a mass of 56.

We set useful threshold defaults for the languages we support but you may want to adjust these settings based on your project guidelines.

The threshold configuration represents the minimum mass a code block must have to be analyzed for duplication. The lower the threshold, the more fine-grained the comparison.

If the engine is too easily reporting duplication, try raising the threshold. If you suspect that the engine isn't catching enough duplication, try lowering the threshold. The best setting tends to differ from language to language.

See codeclimate-duplication's documentation for more information about tuning the mass threshold in your .codeclimate.yml.

Refactorings

Further Reading

Cyclomatic complexity is too high in method _validate_form_post. (10)
Open

    def _validate_form_post(self, data):
        """Convert Python objects to POST values.

        If attribute should not be sent, remove it from the body.
        """
Severity: Minor
Found in terminalone/entity.py by radon

Cyclomatic Complexity

Cyclomatic Complexity corresponds to the number of decisions a block of code contains plus 1. This number (also called McCabe number) is equal to the number of linearly independent paths through the code. This number can be used as a guide when testing conditional logic in blocks.

Radon analyzes the AST tree of a Python program to compute Cyclomatic Complexity. Statements have the following effects on Cyclomatic Complexity:

Construct Effect on CC Reasoning
if +1 An if statement is a single decision.
elif +1 The elif statement adds another decision.
else +0 The else statement does not cause a new decision. The decision is at the if.
for +1 There is a decision at the start of the loop.
while +1 There is a decision at the while statement.
except +1 Each except branch adds a new conditional path of execution.
finally +0 The finally block is unconditionally executed.
with +1 The with statement roughly corresponds to a try/except block (see PEP 343 for details).
assert +1 The assert statement internally roughly equals a conditional statement.
Comprehension +1 A list/set/dict comprehension of generator expression is equivalent to a for loop.
Boolean Operator +1 Every boolean operator (and, or) adds a decision point.

Source: http://radon.readthedocs.org/en/latest/intro.html

Cyclomatic complexity is too high in method _construct_url. (9)
Open

    @staticmethod
    def _construct_url(collection, entity, child, limit):
        """Construct URL."""
        url = [collection, ]
        if entity is not None:
Severity: Minor
Found in terminalone/service.py by radon

Cyclomatic Complexity

Cyclomatic Complexity corresponds to the number of decisions a block of code contains plus 1. This number (also called McCabe number) is equal to the number of linearly independent paths through the code. This number can be used as a guide when testing conditional logic in blocks.

Radon analyzes the AST tree of a Python program to compute Cyclomatic Complexity. Statements have the following effects on Cyclomatic Complexity:

Construct Effect on CC Reasoning
if +1 An if statement is a single decision.
elif +1 The elif statement adds another decision.
else +0 The else statement does not cause a new decision. The decision is at the if.
for +1 There is a decision at the start of the loop.
while +1 There is a decision at the while statement.
except +1 Each except branch adds a new conditional path of execution.
finally +0 The finally block is unconditionally executed.
with +1 The with statement roughly corresponds to a try/except block (see PEP 343 for details).
assert +1 The assert statement internally roughly equals a conditional statement.
Comprehension +1 A list/set/dict comprehension of generator expression is equivalent to a for loop.
Boolean Operator +1 Every boolean operator (and, or) adds a decision point.

Source: http://radon.readthedocs.org/en/latest/intro.html

Cyclomatic complexity is too high in method _construct_params. (9)
Open

    @staticmethod
    def _construct_params(entity, **kwargs):
        """Construct URL params."""
        if entity is not None:
            params = {}
Severity: Minor
Found in terminalone/service.py by radon

Cyclomatic Complexity

Cyclomatic Complexity corresponds to the number of decisions a block of code contains plus 1. This number (also called McCabe number) is equal to the number of linearly independent paths through the code. This number can be used as a guide when testing conditional logic in blocks.

Radon analyzes the AST tree of a Python program to compute Cyclomatic Complexity. Statements have the following effects on Cyclomatic Complexity:

Construct Effect on CC Reasoning
if +1 An if statement is a single decision.
elif +1 The elif statement adds another decision.
else +0 The else statement does not cause a new decision. The decision is at the if.
for +1 There is a decision at the start of the loop.
while +1 There is a decision at the while statement.
except +1 Each except branch adds a new conditional path of execution.
finally +0 The finally block is unconditionally executed.
with +1 The with statement roughly corresponds to a try/except block (see PEP 343 for details).
assert +1 The assert statement internally roughly equals a conditional statement.
Comprehension +1 A list/set/dict comprehension of generator expression is equivalent to a for loop.
Boolean Operator +1 Every boolean operator (and, or) adds a decision point.

Source: http://radon.readthedocs.org/en/latest/intro.html

Cyclomatic complexity is too high in method _serialize_target_expr. (9)
Open

    def _serialize_target_expr(self):
        """Serialize pixel_target_expr dict into string"""
        include_bool = '] {} ['.format(self.pixel_target_expr['include']['operator'] or 'OR')
        include_pixels = self.pixel_target_expr['include']['pixels']
        exclude_bool = '] {} ['.format(self.pixel_target_expr['exclude']['operator'] or 'OR')
Severity: Minor
Found in terminalone/models/strategy.py by radon

Cyclomatic Complexity

Cyclomatic Complexity corresponds to the number of decisions a block of code contains plus 1. This number (also called McCabe number) is equal to the number of linearly independent paths through the code. This number can be used as a guide when testing conditional logic in blocks.

Radon analyzes the AST tree of a Python program to compute Cyclomatic Complexity. Statements have the following effects on Cyclomatic Complexity:

Construct Effect on CC Reasoning
if +1 An if statement is a single decision.
elif +1 The elif statement adds another decision.
else +0 The else statement does not cause a new decision. The decision is at the if.
for +1 There is a decision at the start of the loop.
while +1 There is a decision at the while statement.
except +1 Each except branch adds a new conditional path of execution.
finally +0 The finally block is unconditionally executed.
with +1 The with statement roughly corresponds to a try/except block (see PEP 343 for details).
assert +1 The assert statement internally roughly equals a conditional statement.
Comprehension +1 A list/set/dict comprehension of generator expression is equivalent to a for loop.
Boolean Operator +1 Every boolean operator (and, or) adds a decision point.

Source: http://radon.readthedocs.org/en/latest/intro.html

Cyclomatic complexity is too high in method save_budget_flights. (9)
Open

    def save_budget_flights(self, data=None):
        if data is None and self.budget_flights is None:
            raise ClientError('No budget flights to save')
        if data is None:
            data = self.budget_flights
Severity: Minor
Found in terminalone/models/campaign.py by radon

Cyclomatic Complexity

Cyclomatic Complexity corresponds to the number of decisions a block of code contains plus 1. This number (also called McCabe number) is equal to the number of linearly independent paths through the code. This number can be used as a guide when testing conditional logic in blocks.

Radon analyzes the AST tree of a Python program to compute Cyclomatic Complexity. Statements have the following effects on Cyclomatic Complexity:

Construct Effect on CC Reasoning
if +1 An if statement is a single decision.
elif +1 The elif statement adds another decision.
else +0 The else statement does not cause a new decision. The decision is at the if.
for +1 There is a decision at the start of the loop.
while +1 There is a decision at the while statement.
except +1 Each except branch adds a new conditional path of execution.
finally +0 The finally block is unconditionally executed.
with +1 The with statement roughly corresponds to a try/except block (see PEP 343 for details).
assert +1 The assert statement internally roughly equals a conditional statement.
Comprehension +1 A list/set/dict comprehension of generator expression is equivalent to a for loop.
Boolean Operator +1 Every boolean operator (and, or) adds a decision point.

Source: http://radon.readthedocs.org/en/latest/intro.html

Cyclomatic complexity is too high in method __init__. (9)
Open

    def __init__(self, body):
        self.status_code = False
        try:
            parsed_data = json.loads(body)
        except ValueError as e:
Severity: Minor
Found in terminalone/jsonparser.py by radon

Cyclomatic Complexity

Cyclomatic Complexity corresponds to the number of decisions a block of code contains plus 1. This number (also called McCabe number) is equal to the number of linearly independent paths through the code. This number can be used as a guide when testing conditional logic in blocks.

Radon analyzes the AST tree of a Python program to compute Cyclomatic Complexity. Statements have the following effects on Cyclomatic Complexity:

Construct Effect on CC Reasoning
if +1 An if statement is a single decision.
elif +1 The elif statement adds another decision.
else +0 The else statement does not cause a new decision. The decision is at the if.
for +1 There is a decision at the start of the loop.
while +1 There is a decision at the while statement.
except +1 Each except branch adds a new conditional path of execution.
finally +0 The finally block is unconditionally executed.
with +1 The with statement roughly corresponds to a try/except block (see PEP 343 for details).
assert +1 The assert statement internally roughly equals a conditional statement.
Comprehension +1 A list/set/dict comprehension of generator expression is equivalent to a for loop.
Boolean Operator +1 Every boolean operator (and, or) adds a decision point.

Source: http://radon.readthedocs.org/en/latest/intro.html

Function _change_access has a Cognitive Complexity of 17 (exceeds 5 allowed). Consider refactoring.
Open

    def _change_access(self, entity_access, id_to_change, add):
        entity_hierarchy = ['advertiser',
                            'agency',
                            'organization']
        if entity_access not in entity_hierarchy:
Severity: Minor
Found in terminalone/models/permission.py - About 2 hrs to fix

Cognitive Complexity

Cognitive Complexity is a measure of how difficult a unit of code is to intuitively understand. Unlike Cyclomatic Complexity, which determines how difficult your code will be to test, Cognitive Complexity tells you how difficult your code will be to read and comprehend.

A method's cognitive complexity is based on a few simple rules:

  • Code is not considered more complex when it uses shorthand that the language provides for collapsing multiple statements into one
  • Code is considered more complex for each "break in the linear flow of the code"
  • Code is considered more complex when "flow breaking structures are nested"

Further reading

File connection.py has 257 lines of code (exceeds 250 allowed). Consider refactoring.
Open

# -*- coding: utf-8 -*-
"""Provides connection object for T1."""

from __future__ import absolute_import
Severity: Minor
Found in terminalone/connection.py - About 2 hrs to fix

    Cyclomatic complexity is too high in method _deserialize_target_expr. (8)
    Open

        def _deserialize_target_expr(self):
        """Deserialize pixel_target_expr string into dict"""
        if 'AND NOT' in self.pixel_target_expr:
            include_string, exclude_string = self.pixel_target_expr.split('AND NOT')
        elif 'NOT' in self.pixel_target_expr:
    Severity: Minor
    Found in terminalone/models/strategy.py by radon

    Cyclomatic Complexity

    Cyclomatic Complexity corresponds to the number of decisions a block of code contains plus 1. This number (also called McCabe number) is equal to the number of linearly independent paths through the code. This number can be used as a guide when testing conditional logic in blocks.

    Radon analyzes the AST tree of a Python program to compute Cyclomatic Complexity. Statements have the following effects on Cyclomatic Complexity:

    Construct Effect on CC Reasoning
    if +1 An if statement is a single decision.
    elif +1 The elif statement adds another decision.
    else +0 The else statement does not cause a new decision. The decision is at the if.
    for +1 There is a decision at the start of the loop.
    while +1 There is a decision at the while statement.
    except +1 Each except branch adds a new conditional path of execution.
    finally +0 The finally block is unconditionally executed.
    with +1 The with statement roughly corresponds to a try/except block (see PEP 343 for details).
    assert +1 The assert statement internally roughly equals a conditional statement.
    Comprehension +1 A list/set/dict comprehension of generator expression is equivalent to a for loop.
    Boolean Operator +1 Every boolean operator (and, or) adds a decision point.

    Source: http://radon.readthedocs.org/en/latest/intro.html

    Cyclomatic complexity is too high in method __init__. (8)
    Open

        def __init__(self, xml):
        self.status_code = False
        try:
            result = ET.fromstring(xml)
        except ParseError as exc:
    Severity: Minor
    Found in terminalone/xmlparser.py by radon

    Cyclomatic Complexity

    Cyclomatic Complexity corresponds to the number of decisions a block of code contains plus 1. This number (also called McCabe number) is equal to the number of linearly independent paths through the code. This number can be used as a guide when testing conditional logic in blocks.

    Radon analyzes the AST tree of a Python program to compute Cyclomatic Complexity. Statements have the following effects on Cyclomatic Complexity:

    Construct Effect on CC Reasoning
    if +1 An if statement is a single decision.
    elif +1 The elif statement adds another decision.
    else +0 The else statement does not cause a new decision. The decision is at the if.
    for +1 There is a decision at the start of the loop.
    while +1 There is a decision at the while statement.
    except +1 Each except branch adds a new conditional path of execution.
    finally +0 The finally block is unconditionally executed.
    with +1 The with statement roughly corresponds to a try/except block (see PEP 343 for details).
    assert +1 The assert statement internally roughly equals a conditional statement.
    Comprehension +1 A list/set/dict comprehension of generator expression is equivalent to a for loop.
    Boolean Operator +1 Every boolean operator (and, or) adds a decision point.

    Source: http://radon.readthedocs.org/en/latest/intro.html

    Cyclomatic complexity is too high in method authenticate. (8)
    Open

        def authenticate(self, auth_method, **kwargs):
        """Authenticate using method given."""
        session_id = kwargs.get('session_id')
        access_token = kwargs.get('access_token')
        if session_id is not None and auth_method in ['cookie',
    Severity: Minor
    Found in terminalone/service.py by radon

    Cyclomatic Complexity

    Cyclomatic Complexity corresponds to the number of decisions a block of code contains plus 1. This number (also called McCabe number) is equal to the number of linearly independent paths through the code. This number can be used as a guide when testing conditional logic in blocks.

    Radon analyzes the AST tree of a Python program to compute Cyclomatic Complexity. Statements have the following effects on Cyclomatic Complexity:

    Construct Effect on CC Reasoning
    if +1 An if statement is a single decision.
    elif +1 The elif statement adds another decision.
    else +0 The else statement does not cause a new decision. The decision is at the if.
    for +1 There is a decision at the start of the loop.
    while +1 There is a decision at the while statement.
    except +1 Each except branch adds a new conditional path of execution.
    finally +0 The finally block is unconditionally executed.
    with +1 The with statement roughly corresponds to a try/except block (see PEP 343 for details).
    assert +1 The assert statement internally roughly equals a conditional statement.
    Comprehension +1 A list/set/dict comprehension of generator expression is equivalent to a for loop.
    Boolean Operator +1 Every boolean operator (and, or) adds a decision point.

    Source: http://radon.readthedocs.org/en/latest/intro.html

    Cyclomatic complexity is too high in method save. (8)
    Open

        def save(self, data=None, url=None):
        """Save object to T1 accounting for fields an pixel target expr"""
        if data is None:
            data = self._properties.copy()
    Severity: Minor
    Found in terminalone/models/strategy.py by radon

    Cyclomatic Complexity

    Cyclomatic Complexity corresponds to the number of decisions a block of code contains plus 1. This number (also called McCabe number) is equal to the number of linearly independent paths through the code. This number can be used as a guide when testing conditional logic in blocks.

    Radon analyzes the AST tree of a Python program to compute Cyclomatic Complexity. Statements have the following effects on Cyclomatic Complexity:

    Construct Effect on CC Reasoning
    if +1 An if statement is a single decision.
    elif +1 The elif statement adds another decision.
    else +0 The else statement does not cause a new decision. The decision is at the if.
    for +1 There is a decision at the start of the loop.
    while +1 There is a decision at the while statement.
    except +1 Each except branch adds a new conditional path of execution.
    finally +0 The finally block is unconditionally executed.
    with +1 The with statement roughly corresponds to a try/except block (see PEP 343 for details).
    assert +1 The assert statement internally roughly equals a conditional statement.
    Comprehension +1 A list/set/dict comprehension of generator expression is equivalent to a for loop.
    Boolean Operator +1 Every boolean operator (and, or) adds a decision point.

    Source: http://radon.readthedocs.org/en/latest/intro.html

    Cyclomatic complexity is too high in method _validate_json_post. (8)
    Open

        def _validate_json_post(self, data):
        """Convert Python objects to POST values.

        If attribute should not be sent, remove it from the body.
        """
    Severity: Minor
    Found in terminalone/entity.py by radon

    Cyclomatic Complexity

    Cyclomatic Complexity corresponds to the number of decisions a block of code contains plus 1. This number (also called McCabe number) is equal to the number of linearly independent paths through the code. This number can be used as a guide when testing conditional logic in blocks.

    Radon analyzes the AST tree of a Python program to compute Cyclomatic Complexity. Statements have the following effects on Cyclomatic Complexity:

    Construct Effect on CC Reasoning
    if +1 An if statement is a single decision.
    elif +1 The elif statement adds another decision.
    else +0 The else statement does not cause a new decision. The decision is at the if.
    for +1 There is a decision at the start of the loop.
    while +1 There is a decision at the while statement.
    except +1 Each except branch adds a new conditional path of execution.
    finally +0 The finally block is unconditionally executed.
    with +1 The with statement roughly corresponds to a try/except block (see PEP 343 for details).
    assert +1 The assert statement internally roughly equals a conditional statement.
    Comprehension +1 A list/set/dict comprehension of generator expression is equivalent to a for loop.
    Boolean Operator +1 Every boolean operator (and, or) adds a decision point.

    Source: http://radon.readthedocs.org/en/latest/intro.html

    Cyclomatic complexity is too high in method _change_access. (8)
    Open

        def _change_access(self, entity_access, id_to_change, add):
        entity_hierarchy = ['advertiser',
                            'agency',
                            'organization']
        if entity_access not in entity_hierarchy:
    Severity: Minor
    Found in terminalone/models/permission.py by radon

    Cyclomatic Complexity

    Cyclomatic Complexity corresponds to the number of decisions a block of code contains plus 1. This number (also called McCabe number) is equal to the number of linearly independent paths through the code. This number can be used as a guide when testing conditional logic in blocks.

    Radon analyzes the AST tree of a Python program to compute Cyclomatic Complexity. Statements have the following effects on Cyclomatic Complexity:

    Construct Effect on CC Reasoning
    if +1 An if statement is a single decision.
    elif +1 The elif statement adds another decision.
    else +0 The else statement does not cause a new decision. The decision is at the if.
    for +1 There is a decision at the start of the loop.
    while +1 There is a decision at the while statement.
    except +1 Each except branch adds a new conditional path of execution.
    finally +0 The finally block is unconditionally executed.
    with +1 The with statement roughly corresponds to a try/except block (see PEP 343 for details).
    assert +1 The assert statement internally roughly equals a conditional statement.
    Comprehension +1 A list/set/dict comprehension of generator expression is equivalent to a for loop.
    Boolean Operator +1 Every boolean operator (and, or) adds a decision point.

    Source: http://radon.readthedocs.org/en/latest/intro.html

    Function __init__ has 17 arguments (exceeds 4 allowed). Consider refactoring.
    Open

        def __init__(self,
    Severity: Major
    Found in terminalone/service.py - About 2 hrs to fix

      Similar blocks of code found in 6 locations. Consider refactoring.
      Open

              if 'conversion_variable_minutes' in data and data['conversion_variable_minutes'] is None:
            self._properties.pop('conversion_variable_minutes', None)
            data['conversion_variable_minutes'] = None
      Severity: Major
      Found in terminalone/models/campaign.py and 5 other locations - About 2 hrs to fix
      terminalone/models/campaign.py on lines 141..143
      terminalone/models/campaign.py on lines 144..146
      terminalone/models/campaign.py on lines 147..149
      terminalone/models/campaign.py on lines 150..152
      terminalone/models/strategy.py on lines 238..240

      Duplicated Code

      Duplicated code can lead to software that is hard to understand and difficult to change. The Don't Repeat Yourself (DRY) principle states:

      Every piece of knowledge must have a single, unambiguous, authoritative representation within a system.

      When you violate DRY, bugs and maintenance problems are sure to follow. Duplicated code has a tendency to both continue to replicate and also to diverge (leaving bugs as two similar implementations differ in subtle ways).

      Tuning

      This issue has a mass of 50.

      We set useful threshold defaults for the languages we support but you may want to adjust these settings based on your project guidelines.

      The threshold configuration represents the minimum mass a code block must have to be analyzed for duplication. The lower the threshold, the more fine-grained the comparison.

      If the engine is too easily reporting duplication, try raising the threshold. If you suspect that the engine isn't catching enough duplication, try lowering the threshold. The best setting tends to differ from language to language.

      See codeclimate-duplication's documentation for more information about tuning the mass threshold in your .codeclimate.yml.

      Refactorings

      Further Reading

      Similar blocks of code found in 6 locations. Consider refactoring.
      Open

              if 'budget' in data and data['budget'] is None:
            self._properties.pop('budget', None)
            data['budget'] = None
      Severity: Major
      Found in terminalone/models/strategy.py and 5 other locations - About 2 hrs to fix
      terminalone/models/campaign.py on lines 141..143
      terminalone/models/campaign.py on lines 144..146
      terminalone/models/campaign.py on lines 147..149
      terminalone/models/campaign.py on lines 150..152
      terminalone/models/campaign.py on lines 153..155

      Duplicated Code

      Duplicated code can lead to software that is hard to understand and difficult to change. The Don't Repeat Yourself (DRY) principle states:

      Every piece of knowledge must have a single, unambiguous, authoritative representation within a system.

      When you violate DRY, bugs and maintenance problems are sure to follow. Duplicated code has a tendency to both continue to replicate and also to diverge (leaving bugs as two similar implementations differ in subtle ways).

      Tuning

      This issue has a mass of 50.

      We set useful threshold defaults for the languages we support but you may want to adjust these settings based on your project guidelines.

      The threshold configuration represents the minimum mass a code block must have to be analyzed for duplication. The lower the threshold, the more fine-grained the comparison.

      If the engine is too easily reporting duplication, try raising the threshold. If you suspect that the engine isn't catching enough duplication, try lowering the threshold. The best setting tends to differ from language to language.

      See codeclimate-duplication's documentation for more information about tuning the mass threshold in your .codeclimate.yml.

      Refactorings

      Further Reading

      Similar blocks of code found in 6 locations. Consider refactoring.
      Open

              if 'pv_window_minutes' in data and data['pv_window_minutes'] is None:
            self._properties.pop('pv_window_minutes', None)
            data['pv_window_minutes'] = None
      Severity: Major
      Found in terminalone/models/campaign.py and 5 other locations - About 2 hrs to fix
      terminalone/models/campaign.py on lines 141..143
      terminalone/models/campaign.py on lines 144..146
      terminalone/models/campaign.py on lines 150..152
      terminalone/models/campaign.py on lines 153..155
      terminalone/models/strategy.py on lines 238..240

      Duplicated Code

      Duplicated code can lead to software that is hard to understand and difficult to change. The Don't Repeat Yourself (DRY) principle states:

      Every piece of knowledge must have a single, unambiguous, authoritative representation within a system.

      When you violate DRY, bugs and maintenance problems are sure to follow. Duplicated code has a tendency to both continue to replicate and also to diverge (leaving bugs as two similar implementations differ in subtle ways).

      Tuning

      This issue has a mass of 50.

      We set useful threshold defaults for the languages we support but you may want to adjust these settings based on your project guidelines.

      The threshold configuration represents the minimum mass a code block must have to be analyzed for duplication. The lower the threshold, the more fine-grained the comparison.

      If the engine is too easily reporting duplication, try raising the threshold. If you suspect that the engine isn't catching enough duplication, try lowering the threshold. The best setting tends to differ from language to language.

      See codeclimate-duplication's documentation for more information about tuning the mass threshold in your .codeclimate.yml.

      Refactorings

      Further Reading

      Severity
      Category
      Status
      Source
      Language