Headers should be surrounded by blank lines Open
### 2. Install Nektos
- Read upRead up
- Exclude checks
MD022 - Headers should be surrounded by blank lines
Tags: headers, blank_lines
Aliases: blanks-around-headers
This rule is triggered when headers (any style) are either not preceded or not followed by a blank line:
# Header 1
Some text
Some more text
## Header 2
To fix this, ensure that all headers have a blank line both before and after (except where the header is at the beginning or end of the document):
# Header 1
Some text
Some more text
## Header 2
Rationale: Aside from aesthetic reasons, some parsers, including kramdown, will not parse headers that don't have a blank line before, and will parse them as regular text.
Headers should be surrounded by blank lines Open
### 3. Install Azure CLI
- Read upRead up
- Exclude checks
MD022 - Headers should be surrounded by blank lines
Tags: headers, blank_lines
Aliases: blanks-around-headers
This rule is triggered when headers (any style) are either not preceded or not followed by a blank line:
# Header 1
Some text
Some more text
## Header 2
To fix this, ensure that all headers have a blank line both before and after (except where the header is at the beginning or end of the document):
# Header 1
Some text
Some more text
## Header 2
Rationale: Aside from aesthetic reasons, some parsers, including kramdown, will not parse headers that don't have a blank line before, and will parse them as regular text.
Headers should be surrounded by blank lines Open
## Configure
- Read upRead up
- Exclude checks
MD022 - Headers should be surrounded by blank lines
Tags: headers, blank_lines
Aliases: blanks-around-headers
This rule is triggered when headers (any style) are either not preceded or not followed by a blank line:
# Header 1
Some text
Some more text
## Header 2
To fix this, ensure that all headers have a blank line both before and after (except where the header is at the beginning or end of the document):
# Header 1
Some text
Some more text
## Header 2
Rationale: Aside from aesthetic reasons, some parsers, including kramdown, will not parse headers that don't have a blank line before, and will parse them as regular text.
Fenced code blocks should be surrounded by blank lines Open
```bash
- Read upRead up
- Exclude checks
MD031 - Fenced code blocks should be surrounded by blank lines
Tags: code, blank_lines
Aliases: blanks-around-fences
This rule is triggered when fenced code blocks are either not preceded or not followed by a blank line:
Some text
```
Code block
```
```
Another code block
```
Some more text
To fix this, ensure that all fenced code blocks have a blank line both before and after (except where the block is at the beginning or end of the document):
Some text
```
Code block
```
```
Another code block
```
Some more text
Rationale: Aside from aesthetic reasons, some parsers, including kramdown, will not parse fenced code blocks that don't have blank lines before and after them.
Headers should be surrounded by blank lines Open
# Local testing of GitHub Actions
- Read upRead up
- Exclude checks
MD022 - Headers should be surrounded by blank lines
Tags: headers, blank_lines
Aliases: blanks-around-headers
This rule is triggered when headers (any style) are either not preceded or not followed by a blank line:
# Header 1
Some text
Some more text
## Header 2
To fix this, ensure that all headers have a blank line both before and after (except where the header is at the beginning or end of the document):
# Header 1
Some text
Some more text
## Header 2
Rationale: Aside from aesthetic reasons, some parsers, including kramdown, will not parse headers that don't have a blank line before, and will parse them as regular text.
Line length Open
A new file `{some-name}.json` will be generated inside `/testing/`. This is the local git branch that `Act` will run.
- Read upRead up
- Exclude checks
MD013 - Line length
Tags: line_length
Aliases: line-length Parameters: linelength, codeblocks, tables (number; default 80, boolean; default true)
This rule is triggered when there are lines that are longer than the configured line length (default: 80 characters). To fix this, split the line up into multiple lines.
This rule has an exception where there is no whitespace beyond the configured line length. This allows you to still include items such as long URLs without being forced to break them in the middle.
You also have the option to exclude this rule for code blocks and tables. To
do this, set the code_blocks
and/or tables
parameters to false.
Code blocks are included in this rule by default since it is often a requirement for document readability, and tentatively compatible with code rules. Still, some languages do not lend themselves to short lines.
Headers should be surrounded by blank lines Open
## Test
- Read upRead up
- Exclude checks
MD022 - Headers should be surrounded by blank lines
Tags: headers, blank_lines
Aliases: blanks-around-headers
This rule is triggered when headers (any style) are either not preceded or not followed by a blank line:
# Header 1
Some text
Some more text
## Header 2
To fix this, ensure that all headers have a blank line both before and after (except where the header is at the beginning or end of the document):
# Header 1
Some text
Some more text
## Header 2
Rationale: Aside from aesthetic reasons, some parsers, including kramdown, will not parse headers that don't have a blank line before, and will parse them as regular text.
Fenced code blocks should be surrounded by blank lines Open
```
- Read upRead up
- Exclude checks
MD031 - Fenced code blocks should be surrounded by blank lines
Tags: code, blank_lines
Aliases: blanks-around-fences
This rule is triggered when fenced code blocks are either not preceded or not followed by a blank line:
Some text
```
Code block
```
```
Another code block
```
Some more text
To fix this, ensure that all fenced code blocks have a blank line both before and after (except where the block is at the beginning or end of the document):
Some text
```
Code block
```
```
Another code block
```
Some more text
Rationale: Aside from aesthetic reasons, some parsers, including kramdown, will not parse fenced code blocks that don't have blank lines before and after them.
Lists should be surrounded by blank lines Open
1. The `.actrc` file contains the default configuration and run methods.
- Read upRead up
- Exclude checks
MD032 - Lists should be surrounded by blank lines
Tags: bullet, ul, ol, blank_lines
Aliases: blanks-around-lists
This rule is triggered when lists (of any kind) are either not preceded or not followed by a blank line:
Some text
* Some
* List
1. Some
2. List
Some text
To fix this, ensure that all lists have a blank line both before and after (except where the block is at the beginning or end of the document):
Some text
* Some
* List
1. Some
2. List
Some text
Rationale: Aside from aesthetic reasons, some parsers, including kramdown, will not parse lists that don't have blank lines before and after them.
Note: List items without hanging indents are a violation of this rule; list items with hanging indents are okay:
* This is
not okay
* This is
okay
Trailing spaces Open
Required to run GitHub Actions locally.
- Read upRead up
- Exclude checks
MD009 - Trailing spaces
Tags: whitespace
Aliases: no-trailing-spaces
Parameters: br_spaces (number; default: 0)
This rule is triggered on any lines that end with whitespace. To fix this, find the line that is triggered and remove any trailing spaces from the end.
The brspaces parameter allows an exception to this rule for a specific amount of trailing spaces used to insert an explicit line break/br element. For example, set brspaces to 2 to allow exactly 2 spaces at the end of a line.
Note: you have to set brspaces to 2 or higher for this exception to take effect - you can't insert a br element with just a single trailing space, so if you set brspaces to 1, the exception will be disabled, just as if it was set to the default of 0.
Line length Open
2. Run this Bash script `ci-act-event.sh` to dynamically generate the required configuration file for Act. Two questions will be asked to collect the local git branch name and GitHub event. An example might look like `.github/workflows/testing/push.json` where "push" is the github.event to trigger a GitHub Action against the branch named inside that same file. This file is `.gitignored` so it will need regenerated for testing.
- Read upRead up
- Exclude checks
MD013 - Line length
Tags: line_length
Aliases: line-length Parameters: linelength, codeblocks, tables (number; default 80, boolean; default true)
This rule is triggered when there are lines that are longer than the configured line length (default: 80 characters). To fix this, split the line up into multiple lines.
This rule has an exception where there is no whitespace beyond the configured line length. This allows you to still include items such as long URLs without being forced to break them in the middle.
You also have the option to exclude this rule for code blocks and tables. To
do this, set the code_blocks
and/or tables
parameters to false.
Code blocks are included in this rule by default since it is often a requirement for document readability, and tentatively compatible with code rules. Still, some languages do not lend themselves to short lines.
Dollar signs used before commands without showing output Open
```bash
- Read upRead up
- Exclude checks
MD014 - Dollar signs used before commands without showing output
Tags: code
Aliases: commands-show-output
This rule is triggered when there are code blocks showing shell commands to be typed, and the shell commands are preceded by dollar signs ($):
$ ls
$ cat foo
$ less bar
The dollar signs are unnecessary in the above situation, and should not be included:
ls
cat foo
less bar
However, an exception is made when there is a need to distinguish between typed commands and command output, as in the following example:
$ ls
foo bar
$ cat foo
Hello world
$ cat bar
baz
Rationale: it is easier to copy and paste and less noisy if the dollar signs are omitted when they are not needed. See http://www.cirosantilli.com/markdown-styleguide/#dollar-signs-in-shell-code for more information.
Ordered list item prefix Open
2. Run this Bash script `ci-act-event.sh` to dynamically generate the required configuration file for Act. Two questions will be asked to collect the local git branch name and GitHub event. An example might look like `.github/workflows/testing/push.json` where "push" is the github.event to trigger a GitHub Action against the branch named inside that same file. This file is `.gitignored` so it will need regenerated for testing.
- Read upRead up
- Exclude checks
MD029 - Ordered list item prefix
Tags: ol
Aliases: ol-prefix
Parameters: style ("one", "ordered"; default "one")
This rule is triggered on ordered lists that do not either start with '1.' or do not have a prefix that increases in numerical order (depending on the configured style, which defaults to 'one').
Example valid list if the style is configured as 'one':
1. Do this.
1. Do that.
1. Done.
Example valid list if the style is configured as 'ordered':
1. Do this.
2. Do that.
3. Done.
Bare URL used Open
Leverage the knowledge from https://github.com/nektos/act for detailed instructions.
- Read upRead up
- Exclude checks
MD034 - Bare URL used
Tags: links, url
Aliases: no-bare-urls
This rule is triggered whenever a URL is given that isn't surrounded by angle brackets:
For more information, see http://www.example.com/.
To fix this, add angle brackets around the URL:
For more information, see <http:></http:>.
Rationale: Without angle brackets, the URL isn't converted into a link in many markdown parsers.
Note: if you do want a bare URL without it being converted into a link, enclose it in a code block, otherwise in some markdown parsers it will be converted:
`http://www.example.com`
Bare URL used Open
Required to run GitHub Actions on VMs. Choose your preferred Docker setup https://docs.docker.com/get-docker/.
- Read upRead up
- Exclude checks
MD034 - Bare URL used
Tags: links, url
Aliases: no-bare-urls
This rule is triggered whenever a URL is given that isn't surrounded by angle brackets:
For more information, see http://www.example.com/.
To fix this, add angle brackets around the URL:
For more information, see <http:></http:>.
Rationale: Without angle brackets, the URL isn't converted into a link in many markdown parsers.
Note: if you do want a bare URL without it being converted into a link, enclose it in a code block, otherwise in some markdown parsers it will be converted:
`http://www.example.com`
Fenced code blocks should be surrounded by blank lines Open
```bash
- Read upRead up
- Exclude checks
MD031 - Fenced code blocks should be surrounded by blank lines
Tags: code, blank_lines
Aliases: blanks-around-fences
This rule is triggered when fenced code blocks are either not preceded or not followed by a blank line:
Some text
```
Code block
```
```
Another code block
```
Some more text
To fix this, ensure that all fenced code blocks have a blank line both before and after (except where the block is at the beginning or end of the document):
Some text
```
Code block
```
```
Another code block
```
Some more text
Rationale: Aside from aesthetic reasons, some parsers, including kramdown, will not parse fenced code blocks that don't have blank lines before and after them.
Fenced code blocks should be surrounded by blank lines Open
```bash
- Read upRead up
- Exclude checks
MD031 - Fenced code blocks should be surrounded by blank lines
Tags: code, blank_lines
Aliases: blanks-around-fences
This rule is triggered when fenced code blocks are either not preceded or not followed by a blank line:
Some text
```
Code block
```
```
Another code block
```
Some more text
To fix this, ensure that all fenced code blocks have a blank line both before and after (except where the block is at the beginning or end of the document):
Some text
```
Code block
```
```
Another code block
```
Some more text
Rationale: Aside from aesthetic reasons, some parsers, including kramdown, will not parse fenced code blocks that don't have blank lines before and after them.
Fenced code blocks should be surrounded by blank lines Open
```bash
- Read upRead up
- Exclude checks
MD031 - Fenced code blocks should be surrounded by blank lines
Tags: code, blank_lines
Aliases: blanks-around-fences
This rule is triggered when fenced code blocks are either not preceded or not followed by a blank line:
Some text
```
Code block
```
```
Another code block
```
Some more text
To fix this, ensure that all fenced code blocks have a blank line both before and after (except where the block is at the beginning or end of the document):
Some text
```
Code block
```
```
Another code block
```
Some more text
Rationale: Aside from aesthetic reasons, some parsers, including kramdown, will not parse fenced code blocks that don't have blank lines before and after them.
Trailing spaces Open
1. The `.actrc` file contains the default configuration and run methods.
- Read upRead up
- Exclude checks
MD009 - Trailing spaces
Tags: whitespace
Aliases: no-trailing-spaces
Parameters: br_spaces (number; default: 0)
This rule is triggered on any lines that end with whitespace. To fix this, find the line that is triggered and remove any trailing spaces from the end.
The brspaces parameter allows an exception to this rule for a specific amount of trailing spaces used to insert an explicit line break/br element. For example, set brspaces to 2 to allow exactly 2 spaces at the end of a line.
Note: you have to set brspaces to 2 or higher for this exception to take effect - you can't insert a br element with just a single trailing space, so if you set brspaces to 1, the exception will be disabled, just as if it was set to the default of 0.
Line length Open
Run the event from the `/testing/*` folder as indicated with `-W` or `--workflows` arguments.
- Read upRead up
- Exclude checks
MD013 - Line length
Tags: line_length
Aliases: line-length Parameters: linelength, codeblocks, tables (number; default 80, boolean; default true)
This rule is triggered when there are lines that are longer than the configured line length (default: 80 characters). To fix this, split the line up into multiple lines.
This rule has an exception where there is no whitespace beyond the configured line length. This allows you to still include items such as long URLs without being forced to break them in the middle.
You also have the option to exclude this rule for code blocks and tables. To
do this, set the code_blocks
and/or tables
parameters to false.
Code blocks are included in this rule by default since it is often a requirement for document readability, and tentatively compatible with code rules. Still, some languages do not lend themselves to short lines.
Line length Open
$ act -j build_local_linux -e "./.github/workflows/testing/${github_event}.json" -W "./.github/workflows/testing/"
- Read upRead up
- Exclude checks
MD013 - Line length
Tags: line_length
Aliases: line-length Parameters: linelength, codeblocks, tables (number; default 80, boolean; default true)
This rule is triggered when there are lines that are longer than the configured line length (default: 80 characters). To fix this, split the line up into multiple lines.
This rule has an exception where there is no whitespace beyond the configured line length. This allows you to still include items such as long URLs without being forced to break them in the middle.
You also have the option to exclude this rule for code blocks and tables. To
do this, set the code_blocks
and/or tables
parameters to false.
Code blocks are included in this rule by default since it is often a requirement for document readability, and tentatively compatible with code rules. Still, some languages do not lend themselves to short lines.
Line length Open
When installing packages on docker instances, if versions change, it's important to kill the docker instance and rebuild.
- Read upRead up
- Exclude checks
MD013 - Line length
Tags: line_length
Aliases: line-length Parameters: linelength, codeblocks, tables (number; default 80, boolean; default true)
This rule is triggered when there are lines that are longer than the configured line length (default: 80 characters). To fix this, split the line up into multiple lines.
This rule has an exception where there is no whitespace beyond the configured line length. This allows you to still include items such as long URLs without being forced to break them in the middle.
You also have the option to exclude this rule for code blocks and tables. To
do this, set the code_blocks
and/or tables
parameters to false.
Code blocks are included in this rule by default since it is often a requirement for document readability, and tentatively compatible with code rules. Still, some languages do not lend themselves to short lines.
Headers should be surrounded by blank lines Open
## Install
- Read upRead up
- Exclude checks
MD022 - Headers should be surrounded by blank lines
Tags: headers, blank_lines
Aliases: blanks-around-headers
This rule is triggered when headers (any style) are either not preceded or not followed by a blank line:
# Header 1
Some text
Some more text
## Header 2
To fix this, ensure that all headers have a blank line both before and after (except where the header is at the beginning or end of the document):
# Header 1
Some text
Some more text
## Header 2
Rationale: Aside from aesthetic reasons, some parsers, including kramdown, will not parse headers that don't have a blank line before, and will parse them as regular text.