Mass assignment is a feature of Rails which allows an application to create a record from the values of a hash.

Example:

User.new(params[:user])

Unfortunately, if there is a user field called admin which controls administrator access, now any user can make themselves an administrator.

attr_accessible and attr_protected can be used to limit mass assignment. However, Brakeman will warn unless attr_accessible is used, or mass assignment is completely disabled.

There are two different mass assignment warnings which can arise. The first is when mass assignment actually occurs, such as the example above. This results in a warning like

Unprotected mass assignment near line 61: User.new(params[:user])

The other warning is raised whenever a model is found which does not use attr_accessible. This produces generic warnings like

Mass assignment is not restricted using attr_accessible

with a list of affected models.

In Rails 3.1 and newer, mass assignment can easily be disabled:

config.active_record.whitelist_attributes = true

Unfortunately, it can also easily be bypassed:

User.new(params[:user], :without_protection => true)

Brakeman will warn on uses of without_protection.

Cognitive Complexity

Cognitive Complexity is a measure of how difficult a unit of code is to intuitively understand. Unlike Cyclomatic Complexity, which determines how difficult your code will be to test, Cognitive Complexity tells you how difficult your code will be to read and comprehend.

A method's cognitive complexity is based on a few simple rules:

• Code is not considered more complex when it uses shorthand that the language provides for collapsing multiple statements into one
• Code is considered more complex for each "break in the linear flow of the code"
• Code is considered more complex when "flow breaking structures are nested"

Further reading

• Cognitive Complexity docs
• Cognitive Complexity: A new way of measuring understandability

Checks if the length of a method exceeds some maximum value. Comment lines can optionally be allowed. The maximum allowed length is configurable.

You can set literals you want to fold with CountAsOne. Available are: 'array', 'hash', and 'heredoc'. Each literal will be counted as one line regardless of its actual size.

NOTE: The ExcludedMethods and IgnoredMethods configuration is deprecated and only kept for backwards compatibility. Please use AllowedMethods and AllowedPatterns instead. By default, there are no methods to allowed.

Example: CountAsOne: ['array', 'heredoc']

def m
  array = [       # +1
    1,
    2
  ]

  hash = {        # +3
    key: 'value'
  }

  <<~HEREDOC      # +1
    Heredoc
    content.
  HEREDOC
end               # 5 points

Tries to produce a complexity score that's a measure of the complexity the reader experiences when looking at a method. For that reason it considers when nodes as something that doesn't add as much complexity as an if or a &&. Except if it's one of those special case/when constructs where there's no expression after case. Then the cop treats it as an if/elsif/elsif... and lets all the when nodes count. In contrast to the CyclomaticComplexity cop, this cop considers else nodes as adding complexity.

Example:

def my_method                   # 1
  if cond                       # 1
    case var                    # 2 (0.8 + 4 * 0.2, rounded)
    when 1 then func_one
    when 2 then func_two
    when 3 then func_three
    when 4..10 then func_other
    end
  else                          # 1
    do_something until a && b   # 2
  end                           # ===
end                             # 7 complexity points

Checks that the cyclomatic complexity of methods is not higher than the configured maximum. The cyclomatic complexity is the number of linearly independent paths through a method. The algorithm counts decision points and adds one.

An if statement (or unless or ?:) increases the complexity by one. An else branch does not, since it doesn't add a decision point. The && operator (or keyword and) can be converted to a nested if statement, and ||/or is shorthand for a sequence of ifs, so they also add one. Loops can be said to have an exit condition, so they add one. Blocks that are calls to builtin iteration methods (e.g. `ary.map{...}) also add one, others are ignored.

def each_child_node(*types)               # count begins: 1
  unless block_given?                     # unless: +1
    return to_enum(__method__, *types)

  children.each do |child|                # each{}: +1
    next unless child.is_a?(Node)         # unless: +1

    yield child if types.empty? ||        # if: +1, ||: +1
                   types.include?(child.type)
  end

  self
end                                       # total: 6

Checks that the ABC size of methods is not higher than the configured maximum. The ABC size is based on assignments, branches (method calls), and conditions. See http://c2.com/cgi/wiki?AbcMetric and https://en.wikipedia.org/wiki/ABC_Software_Metric.

Interpreting ABC size:

• <= 17 satisfactory
• 18..30 unsatisfactory
• > 30 dangerous

You can have repeated "attributes" calls count as a single "branch". For this purpose, attributes are any method with no argument; no attempt is meant to distinguish actual attr_reader from other methods.

Example: CountRepeatedAttributes: false (default is true)

# `model` and `current_user`, referenced 3 times each,
 # are each counted as only 1 branch each if
 # `CountRepeatedAttributes` is set to 'false'

 def search
   @posts = model.active.visible_by(current_user)
             .search(params[:q])
   @posts = model.some_process(@posts, current_user)
   @posts = model.another_process(@posts, current_user)

   render 'pages/search/page'
 end

This cop also takes into account AllowedMethods (defaults to []) And AllowedPatterns (defaults to [])

Checks the length of lines in the source code. The maximum length is configurable. The tab size is configured in the IndentationWidth of the Layout/IndentationStyle cop. It also ignores a shebang line by default.

This cop has some autocorrection capabilities. It can programmatically shorten certain long lines by inserting line breaks into expressions that can be safely split across lines. These include arrays, hashes, and method calls with argument lists.

If autocorrection is enabled, the following Layout cops are recommended to further format the broken lines. (Many of these are enabled by default.)

• ArgumentAlignment
• ArrayAlignment
• BlockAlignment
• BlockDelimiters
• BlockEndNewline
• ClosingParenthesisIndentation
• FirstArgumentIndentation
• FirstArrayElementIndentation
• FirstHashElementIndentation
• FirstParameterIndentation
• HashAlignment
• IndentationWidth
• MultilineArrayLineBreaks
• MultilineBlockLayout
• MultilineHashBraceLayout
• MultilineHashKeyLineBreaks
• MultilineMethodArgumentLineBreaks
• MultilineMethodParameterLineBreaks
• ParameterAlignment

Together, these cops will pretty print hashes, arrays, method calls, etc. For example, let's say the max columns is 25:

Example:

# bad
{foo: "0000000000", bar: "0000000000", baz: "0000000000"}

# good
{foo: "0000000000",
bar: "0000000000", baz: "0000000000"}

# good (with recommended cops enabled)
{
  foo: "0000000000",
  bar: "0000000000",
  baz: "0000000000",
}

Checks the length of lines in the source code. The maximum length is configurable. The tab size is configured in the IndentationWidth of the Layout/IndentationStyle cop. It also ignores a shebang line by default.

This cop has some autocorrection capabilities. It can programmatically shorten certain long lines by inserting line breaks into expressions that can be safely split across lines. These include arrays, hashes, and method calls with argument lists.

If autocorrection is enabled, the following Layout cops are recommended to further format the broken lines. (Many of these are enabled by default.)

• ArgumentAlignment
• ArrayAlignment
• BlockAlignment
• BlockDelimiters
• BlockEndNewline
• ClosingParenthesisIndentation
• FirstArgumentIndentation
• FirstArrayElementIndentation
• FirstHashElementIndentation
• FirstParameterIndentation
• HashAlignment
• IndentationWidth
• MultilineArrayLineBreaks
• MultilineBlockLayout
• MultilineHashBraceLayout
• MultilineHashKeyLineBreaks
• MultilineMethodArgumentLineBreaks
• MultilineMethodParameterLineBreaks
• ParameterAlignment

Together, these cops will pretty print hashes, arrays, method calls, etc. For example, let's say the max columns is 25:

Example:

# bad
{foo: "0000000000", bar: "0000000000", baz: "0000000000"}

# good
{foo: "0000000000",
bar: "0000000000", baz: "0000000000"}

# good (with recommended cops enabled)
{
  foo: "0000000000",
  bar: "0000000000",
  baz: "0000000000",
}

Checks the length of lines in the source code. The maximum length is configurable. The tab size is configured in the IndentationWidth of the Layout/IndentationStyle cop. It also ignores a shebang line by default.

This cop has some autocorrection capabilities. It can programmatically shorten certain long lines by inserting line breaks into expressions that can be safely split across lines. These include arrays, hashes, and method calls with argument lists.

If autocorrection is enabled, the following Layout cops are recommended to further format the broken lines. (Many of these are enabled by default.)

• ArgumentAlignment
• ArrayAlignment
• BlockAlignment
• BlockDelimiters
• BlockEndNewline
• ClosingParenthesisIndentation
• FirstArgumentIndentation
• FirstArrayElementIndentation
• FirstHashElementIndentation
• FirstParameterIndentation
• HashAlignment
• IndentationWidth
• MultilineArrayLineBreaks
• MultilineBlockLayout
• MultilineHashBraceLayout
• MultilineHashKeyLineBreaks
• MultilineMethodArgumentLineBreaks
• MultilineMethodParameterLineBreaks
• ParameterAlignment

Together, these cops will pretty print hashes, arrays, method calls, etc. For example, let's say the max columns is 25:

Example:

# bad
{foo: "0000000000", bar: "0000000000", baz: "0000000000"}

# good
{foo: "0000000000",
bar: "0000000000", baz: "0000000000"}

# good (with recommended cops enabled)
{
  foo: "0000000000",
  bar: "0000000000",
  baz: "0000000000",
}

Check for uses of braces or do/end around single line or multi-line blocks.

Methods that can be either procedural or functional and cannot be categorised from their usage alone is ignored. lambda, proc, and it are their defaults. Additional methods can be added to the AllowedMethods.

Example: EnforcedStyle: linecountbased (default)

# bad - single line block
items.each do |item| item / 5 end

# good - single line block
items.each { |item| item / 5 }

# bad - multi-line block
things.map { |thing|
  something = thing.some_method
  process(something)
}

# good - multi-line block
things.map do |thing|
  something = thing.some_method
  process(something)
end

Example: EnforcedStyle: semantic

# Prefer `do...end` over `{...}` for procedural blocks.

# return value is used/assigned
# bad
foo = map do |x|
  x
end
puts (map do |x|
  x
end)

# return value is not used out of scope
# good
map do |x|
  x
end

# Prefer `{...}` over `do...end` for functional blocks.

# return value is not used out of scope
# bad
each { |x|
  x
}

# return value is used/assigned
# good
foo = map { |x|
  x
}
map { |x|
  x
}.inspect

# The AllowBracesOnProceduralOneLiners option is allowed unless the
# EnforcedStyle is set to `semantic`. If so:

# If the AllowBracesOnProceduralOneLiners option is unspecified, or
# set to `false` or any other falsey value, then semantic purity is
# maintained, so one-line procedural blocks must use do-end, not
# braces.

# bad
collection.each { |element| puts element }

# good
collection.each do |element| puts element end

# If the AllowBracesOnProceduralOneLiners option is set to `true`, or
# any other truthy value, then one-line procedural blocks may use
# either style. (There is no setting for requiring braces on them.)

# good
collection.each { |element| puts element }

# also good
collection.each do |element| puts element end

Example: EnforcedStyle: bracesforchaining

# bad
words.each do |word|
  word.flip.flop
end.join("-")

# good
words.each { |word|
  word.flip.flop
}.join("-")

Example: EnforcedStyle: always_braces

# bad
words.each do |word|
  word.flip.flop
end

# good
words.each { |word|
  word.flip.flop
}

Example: BracesRequiredMethods: ['sig']

# Methods listed in the BracesRequiredMethods list, such as 'sig'
# in this example, will require `{...}` braces. This option takes
# precedence over all other configurations except AllowedMethods.

# bad
sig do
  params(
    foo: string,
  ).void
end
def bar(foo)
  puts foo
end

# good
sig {
  params(
    foo: string,
  ).void
}
def bar(foo)
  puts foo
end

Example: AllowedMethods: ['lambda', 'proc', 'it' ] (default)

# good
foo = lambda do |x|
  puts "Hello, #{x}"
end

foo = lambda do |x|
  x * 100
end

Example: AllowedPatterns: [] (default)

# bad
things.map { |thing|
  something = thing.some_method
  process(something)
}

Example: AllowedPatterns: ['map']

# good
things.map { |thing|
  something = thing.some_method
  process(something)
}

Makes sure that rescued exceptions variables are named as expected.

The PreferredName config option takes a String. It represents the required name of the variable. Its default is e.

NOTE: This cop does not consider nested rescues because it cannot guarantee that the variable from the outer rescue is not used within the inner rescue (in which case, changing the inner variable would shadow the outer variable).

Example: PreferredName: e (default)

# bad
begin
  # do something
rescue MyException => exception
  # do something
end

# good
begin
  # do something
rescue MyException => e
  # do something
end

# good
begin
  # do something
rescue MyException => _e
  # do something
end

Example: PreferredName: exception

# bad
begin
  # do something
rescue MyException => e
  # do something
end

# good
begin
  # do something
rescue MyException => exception
  # do something
end

# good
begin
  # do something
rescue MyException => _exception
  # do something
end

Checks for if and unless statements that would fit on one line if written as modifier if/unless. The cop also checks for modifier if/unless lines that exceed the maximum line length.

The maximum line length is configured in the Layout/LineLength cop. The tab size is configured in the IndentationWidth of the Layout/IndentationStyle cop.

Example:

# bad
if condition
  do_stuff(bar)
end

unless qux.empty?
  Foo.do_something
end

do_something_with_a_long_name(arg) if long_condition_that_prevents_code_fit_on_single_line

# good
do_stuff(bar) if condition
Foo.do_something unless qux.empty?

if long_condition_that_prevents_code_fit_on_single_line
  do_something_with_a_long_name(arg)
end

if short_condition # a long comment that makes it too long if it were just a single line
  do_something
end

Check for uses of braces or do/end around single line or multi-line blocks.

Methods that can be either procedural or functional and cannot be categorised from their usage alone is ignored. lambda, proc, and it are their defaults. Additional methods can be added to the AllowedMethods.

Example: EnforcedStyle: linecountbased (default)

# bad - single line block
items.each do |item| item / 5 end

# good - single line block
items.each { |item| item / 5 }

# bad - multi-line block
things.map { |thing|
  something = thing.some_method
  process(something)
}

# good - multi-line block
things.map do |thing|
  something = thing.some_method
  process(something)
end

Example: EnforcedStyle: semantic

# Prefer `do...end` over `{...}` for procedural blocks.

# return value is used/assigned
# bad
foo = map do |x|
  x
end
puts (map do |x|
  x
end)

# return value is not used out of scope
# good
map do |x|
  x
end

# Prefer `{...}` over `do...end` for functional blocks.

# return value is not used out of scope
# bad
each { |x|
  x
}

# return value is used/assigned
# good
foo = map { |x|
  x
}
map { |x|
  x
}.inspect

# The AllowBracesOnProceduralOneLiners option is allowed unless the
# EnforcedStyle is set to `semantic`. If so:

# If the AllowBracesOnProceduralOneLiners option is unspecified, or
# set to `false` or any other falsey value, then semantic purity is
# maintained, so one-line procedural blocks must use do-end, not
# braces.

# bad
collection.each { |element| puts element }

# good
collection.each do |element| puts element end

# If the AllowBracesOnProceduralOneLiners option is set to `true`, or
# any other truthy value, then one-line procedural blocks may use
# either style. (There is no setting for requiring braces on them.)

# good
collection.each { |element| puts element }

# also good
collection.each do |element| puts element end

Example: EnforcedStyle: bracesforchaining

# bad
words.each do |word|
  word.flip.flop
end.join("-")

# good
words.each { |word|
  word.flip.flop
}.join("-")

Example: EnforcedStyle: always_braces

# bad
words.each do |word|
  word.flip.flop
end

# good
words.each { |word|
  word.flip.flop
}

Example: BracesRequiredMethods: ['sig']

# Methods listed in the BracesRequiredMethods list, such as 'sig'
# in this example, will require `{...}` braces. This option takes
# precedence over all other configurations except AllowedMethods.

# bad
sig do
  params(
    foo: string,
  ).void
end
def bar(foo)
  puts foo
end

# good
sig {
  params(
    foo: string,
  ).void
}
def bar(foo)
  puts foo
end

Example: AllowedMethods: ['lambda', 'proc', 'it' ] (default)

# good
foo = lambda do |x|
  puts "Hello, #{x}"
end

foo = lambda do |x|
  x * 100
end

Example: AllowedPatterns: [] (default)

# bad
things.map { |thing|
  something = thing.some_method
  process(something)
}

Example: AllowedPatterns: ['map']

# good
things.map { |thing|
  something = thing.some_method
  process(something)
}

Check for uses of braces or do/end around single line or multi-line blocks.

Methods that can be either procedural or functional and cannot be categorised from their usage alone is ignored. lambda, proc, and it are their defaults. Additional methods can be added to the AllowedMethods.

Example: EnforcedStyle: linecountbased (default)

# bad - single line block
items.each do |item| item / 5 end

# good - single line block
items.each { |item| item / 5 }

# bad - multi-line block
things.map { |thing|
  something = thing.some_method
  process(something)
}

# good - multi-line block
things.map do |thing|
  something = thing.some_method
  process(something)
end

Example: EnforcedStyle: semantic

# Prefer `do...end` over `{...}` for procedural blocks.

# return value is used/assigned
# bad
foo = map do |x|
  x
end
puts (map do |x|
  x
end)

# return value is not used out of scope
# good
map do |x|
  x
end

# Prefer `{...}` over `do...end` for functional blocks.

# return value is not used out of scope
# bad
each { |x|
  x
}

# return value is used/assigned
# good
foo = map { |x|
  x
}
map { |x|
  x
}.inspect

# The AllowBracesOnProceduralOneLiners option is allowed unless the
# EnforcedStyle is set to `semantic`. If so:

# If the AllowBracesOnProceduralOneLiners option is unspecified, or
# set to `false` or any other falsey value, then semantic purity is
# maintained, so one-line procedural blocks must use do-end, not
# braces.

# bad
collection.each { |element| puts element }

# good
collection.each do |element| puts element end

# If the AllowBracesOnProceduralOneLiners option is set to `true`, or
# any other truthy value, then one-line procedural blocks may use
# either style. (There is no setting for requiring braces on them.)

# good
collection.each { |element| puts element }

# also good
collection.each do |element| puts element end

Example: EnforcedStyle: bracesforchaining

# bad
words.each do |word|
  word.flip.flop
end.join("-")

# good
words.each { |word|
  word.flip.flop
}.join("-")

Example: EnforcedStyle: always_braces

# bad
words.each do |word|
  word.flip.flop
end

# good
words.each { |word|
  word.flip.flop
}

Example: BracesRequiredMethods: ['sig']

# Methods listed in the BracesRequiredMethods list, such as 'sig'
# in this example, will require `{...}` braces. This option takes
# precedence over all other configurations except AllowedMethods.

# bad
sig do
  params(
    foo: string,
  ).void
end
def bar(foo)
  puts foo
end

# good
sig {
  params(
    foo: string,
  ).void
}
def bar(foo)
  puts foo
end

Example: AllowedMethods: ['lambda', 'proc', 'it' ] (default)

# good
foo = lambda do |x|
  puts "Hello, #{x}"
end

foo = lambda do |x|
  x * 100
end

Example: AllowedPatterns: [] (default)

# bad
things.map { |thing|
  something = thing.some_method
  process(something)
}

Example: AllowedPatterns: ['map']

# good
things.map { |thing|
  something = thing.some_method
  process(something)
}

Enforces empty line after guard clause

Example:

# bad
def foo
  return if need_return?
  bar
end

# good
def foo
  return if need_return?

  bar
end

# good
def foo
  return if something?
  return if something_different?

  bar
end

# also good
def foo
  if something?
    do_something
    return if need_return?
  end
end

Makes sure that accessor methods are named properly. Applies to both instance and class methods.

NOTE: Offenses are only registered for methods with the expected arity. Getters (get_attribute) must have no arguments to be registered, and setters (set_attribute(value)) must have exactly one.

Example:

# bad
def set_attribute(value)
end

# good
def attribute=(value)
end

# bad
def get_attribute
end

# good
def attribute
end

# accepted, incorrect arity for getter
def get_value(attr)
end

# accepted, incorrect arity for setter
def set_value
end

Makes sure that accessor methods are named properly. Applies to both instance and class methods.

NOTE: Offenses are only registered for methods with the expected arity. Getters (get_attribute) must have no arguments to be registered, and setters (set_attribute(value)) must have exactly one.

Example:

# bad
def set_attribute(value)
end

# good
def attribute=(value)
end

# bad
def get_attribute
end

# good
def attribute
end

# accepted, incorrect arity for getter
def get_value(attr)
end

# accepted, incorrect arity for setter
def set_value
end

Makes sure that accessor methods are named properly. Applies to both instance and class methods.

NOTE: Offenses are only registered for methods with the expected arity. Getters (get_attribute) must have no arguments to be registered, and setters (set_attribute(value)) must have exactly one.

Example:

# bad
def set_attribute(value)
end

# good
def attribute=(value)
end

# bad
def get_attribute
end

# good
def attribute
end

# accepted, incorrect arity for getter
def get_value(attr)
end

# accepted, incorrect arity for setter
def set_value
end

Checks for if and unless statements that would fit on one line if written as modifier if/unless. The cop also checks for modifier if/unless lines that exceed the maximum line length.

The maximum line length is configured in the Layout/LineLength cop. The tab size is configured in the IndentationWidth of the Layout/IndentationStyle cop.

Example:

# bad
if condition
  do_stuff(bar)
end

unless qux.empty?
  Foo.do_something
end

do_something_with_a_long_name(arg) if long_condition_that_prevents_code_fit_on_single_line

# good
do_stuff(bar) if condition
Foo.do_something unless qux.empty?

if long_condition_that_prevents_code_fit_on_single_line
  do_something_with_a_long_name(arg)
end

if short_condition # a long comment that makes it too long if it were just a single line
  do_something
end

Enforces the consistent usage of %-literal delimiters.

Specify the 'default' key to set all preferred delimiters at once. You can continue to specify individual preferred delimiters to override the default.

Example:

# Style/PercentLiteralDelimiters:
#   PreferredDelimiters:
#     default: '[]'
#     '%i':    '()'

# good
%w[alpha beta] + %i(gamma delta)

# bad
%W(alpha #{beta})

# bad
%I(alpha beta)

Checks for if and unless statements that would fit on one line if written as modifier if/unless. The cop also checks for modifier if/unless lines that exceed the maximum line length.

The maximum line length is configured in the Layout/LineLength cop. The tab size is configured in the IndentationWidth of the Layout/IndentationStyle cop.

Example:

# bad
if condition
  do_stuff(bar)
end

unless qux.empty?
  Foo.do_something
end

do_something_with_a_long_name(arg) if long_condition_that_prevents_code_fit_on_single_line

# good
do_stuff(bar) if condition
Foo.do_something unless qux.empty?

if long_condition_that_prevents_code_fit_on_single_line
  do_something_with_a_long_name(arg)
end

if short_condition # a long comment that makes it too long if it were just a single line
  do_something
end

Checks for if and unless statements that would fit on one line if written as modifier if/unless. The cop also checks for modifier if/unless lines that exceed the maximum line length.

The maximum line length is configured in the Layout/LineLength cop. The tab size is configured in the IndentationWidth of the Layout/IndentationStyle cop.

Example:

# bad
if condition
  do_stuff(bar)
end

unless qux.empty?
  Foo.do_something
end

do_something_with_a_long_name(arg) if long_condition_that_prevents_code_fit_on_single_line

# good
do_stuff(bar) if condition
Foo.do_something unless qux.empty?

if long_condition_that_prevents_code_fit_on_single_line
  do_something_with_a_long_name(arg)
end

if short_condition # a long comment that makes it too long if it were just a single line
  do_something
end

Checks for if and unless statements that would fit on one line if written as modifier if/unless. The cop also checks for modifier if/unless lines that exceed the maximum line length.

The maximum line length is configured in the Layout/LineLength cop. The tab size is configured in the IndentationWidth of the Layout/IndentationStyle cop.

Example:

# bad
if condition
  do_stuff(bar)
end

unless qux.empty?
  Foo.do_something
end

do_something_with_a_long_name(arg) if long_condition_that_prevents_code_fit_on_single_line

# good
do_stuff(bar) if condition
Foo.do_something unless qux.empty?

if long_condition_that_prevents_code_fit_on_single_line
  do_something_with_a_long_name(arg)
end

if short_condition # a long comment that makes it too long if it were just a single line
  do_something
end

Checks for rescuing StandardError. There are two supported styles implicit and explicit. This cop will not register an offense if any error other than StandardError is specified.

Example: EnforcedStyle: explicit (default)

# `explicit` will enforce using `rescue StandardError`
# instead of `rescue`.

# bad
begin
  foo
rescue
  bar
end

# good
begin
  foo
rescue StandardError
  bar
end

# good
begin
  foo
rescue OtherError
  bar
end

# good
begin
  foo
rescue StandardError, SecurityError
  bar
end

Example: EnforcedStyle: implicit

# `implicit` will enforce using `rescue` instead of
# `rescue StandardError`.

# bad
begin
  foo
rescue StandardError
  bar
end

# good
begin
  foo
rescue
  bar
end

# good
begin
  foo
rescue OtherError
  bar
end

# good
begin
  foo
rescue StandardError, SecurityError
  bar
end