Sign upLogin

MyEMS/myems

View on GitHub
Star

Showing 10,536 of 10,536 total issues

Similar blocks of code found in 33 locations. Consider refactoring.
Open

app.factory('SpaceCommandService', function($http) {
    return {
        addPair: function(spaceID,commandID, headers, callback) {
            $http.post(getAPI()+'spaces/'+spaceID+'/commands',{data:{'command_id':commandID}}, {headers})
            .then(function (response) {
Severity: Major
Found in myems-admin/app/services/settings/space/spacecommand.service.js and 32 other locations - About 1 day to fix
myems-admin/app/services/settings/combinedequipment/combinedequipmentcommand.service.js on lines 2..30
myems-admin/app/services/settings/combinedequipment/combinedequipmentequipment.service.js on lines 2..30
myems-admin/app/services/settings/costcenter/costcentertariff.service.js on lines 2..29
myems-admin/app/services/settings/distributionsystem/distributioncircuitpoint.service.js on lines 2..30
myems-admin/app/services/settings/energystoragepowerstation/energystoragepowerstationcontainer.service.js on lines 2..30
myems-admin/app/services/settings/energystoragepowerstation/energystoragepowerstationuser.service.js on lines 2..30
myems-admin/app/services/settings/equipment/equipmentcommand.service.js on lines 2..30
myems-admin/app/services/settings/meter/metercommand.service.js on lines 2..30
myems-admin/app/services/settings/meter/meterpoint.service.js on lines 2..30
myems-admin/app/services/settings/microgrid/microgridsensor.service.js on lines 2..30
myems-admin/app/services/settings/microgrid/microgriduser.service.js on lines 2..30
myems-admin/app/services/settings/sensor/sensorpoint.service.js on lines 2..30
myems-admin/app/services/settings/shopfloor/shopfloorcommand.service.js on lines 2..30
myems-admin/app/services/settings/shopfloor/shopfloorequipment.service.js on lines 2..30
myems-admin/app/services/settings/shopfloor/shopfloorpoint.service.js on lines 2..30
myems-admin/app/services/settings/shopfloor/shopfloorsensor.service.js on lines 2..30
myems-admin/app/services/settings/space/spacecombinedequipment.service.js on lines 2..30
myems-admin/app/services/settings/space/spaceenergyflowdiagram.service.js on lines 2..30
myems-admin/app/services/settings/space/spaceenergystoragepowerstation.service.js on lines 2..30
myems-admin/app/services/settings/space/spaceequipment.service.js on lines 2..30
myems-admin/app/services/settings/space/spacepoint.service.js on lines 2..30
myems-admin/app/services/settings/space/spacesensor.service.js on lines 2..30
myems-admin/app/services/settings/space/spaceshopfloor.service.js on lines 2..30
myems-admin/app/services/settings/space/spacestore.service.js on lines 2..30
myems-admin/app/services/settings/space/spacetenant.service.js on lines 2..30
myems-admin/app/services/settings/store/storecommand.service.js on lines 2..30
myems-admin/app/services/settings/store/storepoint.service.js on lines 2..30
myems-admin/app/services/settings/store/storesensor.service.js on lines 2..30
myems-admin/app/services/settings/tenant/tenantcommand.service.js on lines 2..30
myems-admin/app/services/settings/tenant/tenantpoint.service.js on lines 2..30
myems-admin/app/services/settings/tenant/tenantsensor.service.js on lines 2..30
myems-admin/app/services/settings/virtualpowerplant/virtualpowerplantmicrogrid.service.js on lines 2..30

Duplicated Code

Duplicated code can lead to software that is hard to understand and difficult to change. The Don't Repeat Yourself (DRY) principle states:

Every piece of knowledge must have a single, unambiguous, authoritative representation within a system.

When you violate DRY, bugs and maintenance problems are sure to follow. Duplicated code has a tendency to both continue to replicate and also to diverge (leaving bugs as two similar implementations differ in subtle ways).

Tuning

This issue has a mass of 284.

We set useful threshold defaults for the languages we support but you may want to adjust these settings based on your project guidelines.

The threshold configuration represents the minimum mass a code block must have to be analyzed for duplication. The lower the threshold, the more fine-grained the comparison.

If the engine is too easily reporting duplication, try raising the threshold. If you suspect that the engine isn't catching enough duplication, try lowering the threshold. The best setting tends to differ from language to language.

See codeclimate-duplication's documentation for more information about tuning the mass threshold in your .codeclimate.yml.

Refactorings

Further Reading

Similar blocks of code found in 33 locations. Consider refactoring.
Open

app.factory('SpaceEnergyFlowDiagramService', function($http) {
    return {
        addPair: function(spaceID,energyflowdiagramID, headers, callback) {
            $http.post(getAPI()+'spaces/'+spaceID+'/energyflowdiagrams',{data:{'energy_flow_diagram_id':energyflowdiagramID}}, {headers})
            .then(function (response) {
Severity: Major
Found in myems-admin/app/services/settings/space/spaceenergyflowdiagram.service.js and 32 other locations - About 1 day to fix
myems-admin/app/services/settings/combinedequipment/combinedequipmentcommand.service.js on lines 2..30
myems-admin/app/services/settings/combinedequipment/combinedequipmentequipment.service.js on lines 2..30
myems-admin/app/services/settings/costcenter/costcentertariff.service.js on lines 2..29
myems-admin/app/services/settings/distributionsystem/distributioncircuitpoint.service.js on lines 2..30
myems-admin/app/services/settings/energystoragepowerstation/energystoragepowerstationcontainer.service.js on lines 2..30
myems-admin/app/services/settings/energystoragepowerstation/energystoragepowerstationuser.service.js on lines 2..30
myems-admin/app/services/settings/equipment/equipmentcommand.service.js on lines 2..30
myems-admin/app/services/settings/meter/metercommand.service.js on lines 2..30
myems-admin/app/services/settings/meter/meterpoint.service.js on lines 2..30
myems-admin/app/services/settings/microgrid/microgridsensor.service.js on lines 2..30
myems-admin/app/services/settings/microgrid/microgriduser.service.js on lines 2..30
myems-admin/app/services/settings/sensor/sensorpoint.service.js on lines 2..30
myems-admin/app/services/settings/shopfloor/shopfloorcommand.service.js on lines 2..30
myems-admin/app/services/settings/shopfloor/shopfloorequipment.service.js on lines 2..30
myems-admin/app/services/settings/shopfloor/shopfloorpoint.service.js on lines 2..30
myems-admin/app/services/settings/shopfloor/shopfloorsensor.service.js on lines 2..30
myems-admin/app/services/settings/space/spacecombinedequipment.service.js on lines 2..30
myems-admin/app/services/settings/space/spacecommand.service.js on lines 2..30
myems-admin/app/services/settings/space/spaceenergystoragepowerstation.service.js on lines 2..30
myems-admin/app/services/settings/space/spaceequipment.service.js on lines 2..30
myems-admin/app/services/settings/space/spacepoint.service.js on lines 2..30
myems-admin/app/services/settings/space/spacesensor.service.js on lines 2..30
myems-admin/app/services/settings/space/spaceshopfloor.service.js on lines 2..30
myems-admin/app/services/settings/space/spacestore.service.js on lines 2..30
myems-admin/app/services/settings/space/spacetenant.service.js on lines 2..30
myems-admin/app/services/settings/store/storecommand.service.js on lines 2..30
myems-admin/app/services/settings/store/storepoint.service.js on lines 2..30
myems-admin/app/services/settings/store/storesensor.service.js on lines 2..30
myems-admin/app/services/settings/tenant/tenantcommand.service.js on lines 2..30
myems-admin/app/services/settings/tenant/tenantpoint.service.js on lines 2..30
myems-admin/app/services/settings/tenant/tenantsensor.service.js on lines 2..30
myems-admin/app/services/settings/virtualpowerplant/virtualpowerplantmicrogrid.service.js on lines 2..30

Duplicated Code

Duplicated code can lead to software that is hard to understand and difficult to change. The Don't Repeat Yourself (DRY) principle states:

Every piece of knowledge must have a single, unambiguous, authoritative representation within a system.

When you violate DRY, bugs and maintenance problems are sure to follow. Duplicated code has a tendency to both continue to replicate and also to diverge (leaving bugs as two similar implementations differ in subtle ways).

Tuning

This issue has a mass of 284.

We set useful threshold defaults for the languages we support but you may want to adjust these settings based on your project guidelines.

The threshold configuration represents the minimum mass a code block must have to be analyzed for duplication. The lower the threshold, the more fine-grained the comparison.

If the engine is too easily reporting duplication, try raising the threshold. If you suspect that the engine isn't catching enough duplication, try lowering the threshold. The best setting tends to differ from language to language.

See codeclimate-duplication's documentation for more information about tuning the mass threshold in your .codeclimate.yml.

Refactorings

Further Reading

Similar blocks of code found in 33 locations. Consider refactoring.
Open

app.factory('TenantCommandService', function($http) {
    return {
        addPair: function(tenantID,commandID, headers, callback) {
            $http.post(getAPI()+'tenants/'+tenantID+'/commands',{data:{'command_id':commandID}}, {headers})
            .then(function (response) {
Severity: Major
Found in myems-admin/app/services/settings/tenant/tenantcommand.service.js and 32 other locations - About 1 day to fix
myems-admin/app/services/settings/combinedequipment/combinedequipmentcommand.service.js on lines 2..30
myems-admin/app/services/settings/combinedequipment/combinedequipmentequipment.service.js on lines 2..30
myems-admin/app/services/settings/costcenter/costcentertariff.service.js on lines 2..29
myems-admin/app/services/settings/distributionsystem/distributioncircuitpoint.service.js on lines 2..30
myems-admin/app/services/settings/energystoragepowerstation/energystoragepowerstationcontainer.service.js on lines 2..30
myems-admin/app/services/settings/energystoragepowerstation/energystoragepowerstationuser.service.js on lines 2..30
myems-admin/app/services/settings/equipment/equipmentcommand.service.js on lines 2..30
myems-admin/app/services/settings/meter/metercommand.service.js on lines 2..30
myems-admin/app/services/settings/meter/meterpoint.service.js on lines 2..30
myems-admin/app/services/settings/microgrid/microgridsensor.service.js on lines 2..30
myems-admin/app/services/settings/microgrid/microgriduser.service.js on lines 2..30
myems-admin/app/services/settings/sensor/sensorpoint.service.js on lines 2..30
myems-admin/app/services/settings/shopfloor/shopfloorcommand.service.js on lines 2..30
myems-admin/app/services/settings/shopfloor/shopfloorequipment.service.js on lines 2..30
myems-admin/app/services/settings/shopfloor/shopfloorpoint.service.js on lines 2..30
myems-admin/app/services/settings/shopfloor/shopfloorsensor.service.js on lines 2..30
myems-admin/app/services/settings/space/spacecombinedequipment.service.js on lines 2..30
myems-admin/app/services/settings/space/spacecommand.service.js on lines 2..30
myems-admin/app/services/settings/space/spaceenergyflowdiagram.service.js on lines 2..30
myems-admin/app/services/settings/space/spaceenergystoragepowerstation.service.js on lines 2..30
myems-admin/app/services/settings/space/spaceequipment.service.js on lines 2..30
myems-admin/app/services/settings/space/spacepoint.service.js on lines 2..30
myems-admin/app/services/settings/space/spacesensor.service.js on lines 2..30
myems-admin/app/services/settings/space/spaceshopfloor.service.js on lines 2..30
myems-admin/app/services/settings/space/spacestore.service.js on lines 2..30
myems-admin/app/services/settings/space/spacetenant.service.js on lines 2..30
myems-admin/app/services/settings/store/storecommand.service.js on lines 2..30
myems-admin/app/services/settings/store/storepoint.service.js on lines 2..30
myems-admin/app/services/settings/store/storesensor.service.js on lines 2..30
myems-admin/app/services/settings/tenant/tenantpoint.service.js on lines 2..30
myems-admin/app/services/settings/tenant/tenantsensor.service.js on lines 2..30
myems-admin/app/services/settings/virtualpowerplant/virtualpowerplantmicrogrid.service.js on lines 2..30

Duplicated Code

Duplicated code can lead to software that is hard to understand and difficult to change. The Don't Repeat Yourself (DRY) principle states:

Every piece of knowledge must have a single, unambiguous, authoritative representation within a system.

When you violate DRY, bugs and maintenance problems are sure to follow. Duplicated code has a tendency to both continue to replicate and also to diverge (leaving bugs as two similar implementations differ in subtle ways).

Tuning

This issue has a mass of 284.

We set useful threshold defaults for the languages we support but you may want to adjust these settings based on your project guidelines.

The threshold configuration represents the minimum mass a code block must have to be analyzed for duplication. The lower the threshold, the more fine-grained the comparison.

If the engine is too easily reporting duplication, try raising the threshold. If you suspect that the engine isn't catching enough duplication, try lowering the threshold. The best setting tends to differ from language to language.

See codeclimate-duplication's documentation for more information about tuning the mass threshold in your .codeclimate.yml.

Refactorings

Further Reading

Similar blocks of code found in 33 locations. Consider refactoring.
Open

app.factory('SpaceEquipmentService', function($http) {
    return {
        addPair: function(spaceID,equipmentID, headers, callback) {
            $http.post(getAPI()+'spaces/'+spaceID+'/equipments',{data:{'equipment_id':equipmentID}}, {headers})
            .then(function (response) {
Severity: Major
Found in myems-admin/app/services/settings/space/spaceequipment.service.js and 32 other locations - About 1 day to fix
myems-admin/app/services/settings/combinedequipment/combinedequipmentcommand.service.js on lines 2..30
myems-admin/app/services/settings/combinedequipment/combinedequipmentequipment.service.js on lines 2..30
myems-admin/app/services/settings/costcenter/costcentertariff.service.js on lines 2..29
myems-admin/app/services/settings/distributionsystem/distributioncircuitpoint.service.js on lines 2..30
myems-admin/app/services/settings/energystoragepowerstation/energystoragepowerstationcontainer.service.js on lines 2..30
myems-admin/app/services/settings/energystoragepowerstation/energystoragepowerstationuser.service.js on lines 2..30
myems-admin/app/services/settings/equipment/equipmentcommand.service.js on lines 2..30
myems-admin/app/services/settings/meter/metercommand.service.js on lines 2..30
myems-admin/app/services/settings/meter/meterpoint.service.js on lines 2..30
myems-admin/app/services/settings/microgrid/microgridsensor.service.js on lines 2..30
myems-admin/app/services/settings/microgrid/microgriduser.service.js on lines 2..30
myems-admin/app/services/settings/sensor/sensorpoint.service.js on lines 2..30
myems-admin/app/services/settings/shopfloor/shopfloorcommand.service.js on lines 2..30
myems-admin/app/services/settings/shopfloor/shopfloorequipment.service.js on lines 2..30
myems-admin/app/services/settings/shopfloor/shopfloorpoint.service.js on lines 2..30
myems-admin/app/services/settings/shopfloor/shopfloorsensor.service.js on lines 2..30
myems-admin/app/services/settings/space/spacecombinedequipment.service.js on lines 2..30
myems-admin/app/services/settings/space/spacecommand.service.js on lines 2..30
myems-admin/app/services/settings/space/spaceenergyflowdiagram.service.js on lines 2..30
myems-admin/app/services/settings/space/spaceenergystoragepowerstation.service.js on lines 2..30
myems-admin/app/services/settings/space/spacepoint.service.js on lines 2..30
myems-admin/app/services/settings/space/spacesensor.service.js on lines 2..30
myems-admin/app/services/settings/space/spaceshopfloor.service.js on lines 2..30
myems-admin/app/services/settings/space/spacestore.service.js on lines 2..30
myems-admin/app/services/settings/space/spacetenant.service.js on lines 2..30
myems-admin/app/services/settings/store/storecommand.service.js on lines 2..30
myems-admin/app/services/settings/store/storepoint.service.js on lines 2..30
myems-admin/app/services/settings/store/storesensor.service.js on lines 2..30
myems-admin/app/services/settings/tenant/tenantcommand.service.js on lines 2..30
myems-admin/app/services/settings/tenant/tenantpoint.service.js on lines 2..30
myems-admin/app/services/settings/tenant/tenantsensor.service.js on lines 2..30
myems-admin/app/services/settings/virtualpowerplant/virtualpowerplantmicrogrid.service.js on lines 2..30

Duplicated Code

Duplicated code can lead to software that is hard to understand and difficult to change. The Don't Repeat Yourself (DRY) principle states:

Every piece of knowledge must have a single, unambiguous, authoritative representation within a system.

When you violate DRY, bugs and maintenance problems are sure to follow. Duplicated code has a tendency to both continue to replicate and also to diverge (leaving bugs as two similar implementations differ in subtle ways).

Tuning

This issue has a mass of 284.

We set useful threshold defaults for the languages we support but you may want to adjust these settings based on your project guidelines.

The threshold configuration represents the minimum mass a code block must have to be analyzed for duplication. The lower the threshold, the more fine-grained the comparison.

If the engine is too easily reporting duplication, try raising the threshold. If you suspect that the engine isn't catching enough duplication, try lowering the threshold. The best setting tends to differ from language to language.

See codeclimate-duplication's documentation for more information about tuning the mass threshold in your .codeclimate.yml.

Refactorings

Further Reading

Similar blocks of code found in 33 locations. Consider refactoring.
Open

app.factory('StorePointService', function($http) {
    return {
        addPair: function(storeID,pointID, headers, callback) {
            $http.post(getAPI()+'stores/'+storeID+'/points',{data:{'point_id':pointID}}, {headers})
            .then(function (response) {
Severity: Major
Found in myems-admin/app/services/settings/store/storepoint.service.js and 32 other locations - About 1 day to fix
myems-admin/app/services/settings/combinedequipment/combinedequipmentcommand.service.js on lines 2..30
myems-admin/app/services/settings/combinedequipment/combinedequipmentequipment.service.js on lines 2..30
myems-admin/app/services/settings/costcenter/costcentertariff.service.js on lines 2..29
myems-admin/app/services/settings/distributionsystem/distributioncircuitpoint.service.js on lines 2..30
myems-admin/app/services/settings/energystoragepowerstation/energystoragepowerstationcontainer.service.js on lines 2..30
myems-admin/app/services/settings/energystoragepowerstation/energystoragepowerstationuser.service.js on lines 2..30
myems-admin/app/services/settings/equipment/equipmentcommand.service.js on lines 2..30
myems-admin/app/services/settings/meter/metercommand.service.js on lines 2..30
myems-admin/app/services/settings/meter/meterpoint.service.js on lines 2..30
myems-admin/app/services/settings/microgrid/microgridsensor.service.js on lines 2..30
myems-admin/app/services/settings/microgrid/microgriduser.service.js on lines 2..30
myems-admin/app/services/settings/sensor/sensorpoint.service.js on lines 2..30
myems-admin/app/services/settings/shopfloor/shopfloorcommand.service.js on lines 2..30
myems-admin/app/services/settings/shopfloor/shopfloorequipment.service.js on lines 2..30
myems-admin/app/services/settings/shopfloor/shopfloorpoint.service.js on lines 2..30
myems-admin/app/services/settings/shopfloor/shopfloorsensor.service.js on lines 2..30
myems-admin/app/services/settings/space/spacecombinedequipment.service.js on lines 2..30
myems-admin/app/services/settings/space/spacecommand.service.js on lines 2..30
myems-admin/app/services/settings/space/spaceenergyflowdiagram.service.js on lines 2..30
myems-admin/app/services/settings/space/spaceenergystoragepowerstation.service.js on lines 2..30
myems-admin/app/services/settings/space/spaceequipment.service.js on lines 2..30
myems-admin/app/services/settings/space/spacepoint.service.js on lines 2..30
myems-admin/app/services/settings/space/spacesensor.service.js on lines 2..30
myems-admin/app/services/settings/space/spaceshopfloor.service.js on lines 2..30
myems-admin/app/services/settings/space/spacestore.service.js on lines 2..30
myems-admin/app/services/settings/space/spacetenant.service.js on lines 2..30
myems-admin/app/services/settings/store/storecommand.service.js on lines 2..30
myems-admin/app/services/settings/store/storesensor.service.js on lines 2..30
myems-admin/app/services/settings/tenant/tenantcommand.service.js on lines 2..30
myems-admin/app/services/settings/tenant/tenantpoint.service.js on lines 2..30
myems-admin/app/services/settings/tenant/tenantsensor.service.js on lines 2..30
myems-admin/app/services/settings/virtualpowerplant/virtualpowerplantmicrogrid.service.js on lines 2..30

Duplicated Code

Duplicated code can lead to software that is hard to understand and difficult to change. The Don't Repeat Yourself (DRY) principle states:

Every piece of knowledge must have a single, unambiguous, authoritative representation within a system.

When you violate DRY, bugs and maintenance problems are sure to follow. Duplicated code has a tendency to both continue to replicate and also to diverge (leaving bugs as two similar implementations differ in subtle ways).

Tuning

This issue has a mass of 284.

We set useful threshold defaults for the languages we support but you may want to adjust these settings based on your project guidelines.

The threshold configuration represents the minimum mass a code block must have to be analyzed for duplication. The lower the threshold, the more fine-grained the comparison.

If the engine is too easily reporting duplication, try raising the threshold. If you suspect that the engine isn't catching enough duplication, try lowering the threshold. The best setting tends to differ from language to language.

See codeclimate-duplication's documentation for more information about tuning the mass threshold in your .codeclimate.yml.

Refactorings

Further Reading

Identical blocks of code found in 2 locations. Consider refactoring.
Open

if (!Array.prototype.indexOf) {
  Array.prototype.indexOf = function (searchElement, fromIndex) {

    var k;
Severity: Major
Found in myems-admin/js/plugins/jvectormap/jquery-jvectormap-2.0.2.min.js and 1 other location - About 1 day to fix
myems-admin/js/plugins/oclazyload/ocLazyLoad.js on lines 1293..1354

Duplicated Code

Duplicated code can lead to software that is hard to understand and difficult to change. The Don't Repeat Yourself (DRY) principle states:

Every piece of knowledge must have a single, unambiguous, authoritative representation within a system.

When you violate DRY, bugs and maintenance problems are sure to follow. Duplicated code has a tendency to both continue to replicate and also to diverge (leaving bugs as two similar implementations differ in subtle ways).

Tuning

This issue has a mass of 284.

We set useful threshold defaults for the languages we support but you may want to adjust these settings based on your project guidelines.

The threshold configuration represents the minimum mass a code block must have to be analyzed for duplication. The lower the threshold, the more fine-grained the comparison.

If the engine is too easily reporting duplication, try raising the threshold. If you suspect that the engine isn't catching enough duplication, try lowering the threshold. The best setting tends to differ from language to language.

See codeclimate-duplication's documentation for more information about tuning the mass threshold in your .codeclimate.yml.

Refactorings

Further Reading

Similar blocks of code found in 33 locations. Consider refactoring.
Open

app.factory('SpaceShopfloorService', function($http) {
    return {
        addPair: function(spaceID,shopfloorID, headers, callback) {
            $http.post(getAPI()+'spaces/'+spaceID+'/shopfloors',{data:{'shopfloor_id':shopfloorID}}, {headers})
            .then(function (response) {
Severity: Major
Found in myems-admin/app/services/settings/space/spaceshopfloor.service.js and 32 other locations - About 1 day to fix
myems-admin/app/services/settings/combinedequipment/combinedequipmentcommand.service.js on lines 2..30
myems-admin/app/services/settings/combinedequipment/combinedequipmentequipment.service.js on lines 2..30
myems-admin/app/services/settings/costcenter/costcentertariff.service.js on lines 2..29
myems-admin/app/services/settings/distributionsystem/distributioncircuitpoint.service.js on lines 2..30
myems-admin/app/services/settings/energystoragepowerstation/energystoragepowerstationcontainer.service.js on lines 2..30
myems-admin/app/services/settings/energystoragepowerstation/energystoragepowerstationuser.service.js on lines 2..30
myems-admin/app/services/settings/equipment/equipmentcommand.service.js on lines 2..30
myems-admin/app/services/settings/meter/metercommand.service.js on lines 2..30
myems-admin/app/services/settings/meter/meterpoint.service.js on lines 2..30
myems-admin/app/services/settings/microgrid/microgridsensor.service.js on lines 2..30
myems-admin/app/services/settings/microgrid/microgriduser.service.js on lines 2..30
myems-admin/app/services/settings/sensor/sensorpoint.service.js on lines 2..30
myems-admin/app/services/settings/shopfloor/shopfloorcommand.service.js on lines 2..30
myems-admin/app/services/settings/shopfloor/shopfloorequipment.service.js on lines 2..30
myems-admin/app/services/settings/shopfloor/shopfloorpoint.service.js on lines 2..30
myems-admin/app/services/settings/shopfloor/shopfloorsensor.service.js on lines 2..30
myems-admin/app/services/settings/space/spacecombinedequipment.service.js on lines 2..30
myems-admin/app/services/settings/space/spacecommand.service.js on lines 2..30
myems-admin/app/services/settings/space/spaceenergyflowdiagram.service.js on lines 2..30
myems-admin/app/services/settings/space/spaceenergystoragepowerstation.service.js on lines 2..30
myems-admin/app/services/settings/space/spaceequipment.service.js on lines 2..30
myems-admin/app/services/settings/space/spacepoint.service.js on lines 2..30
myems-admin/app/services/settings/space/spacesensor.service.js on lines 2..30
myems-admin/app/services/settings/space/spacestore.service.js on lines 2..30
myems-admin/app/services/settings/space/spacetenant.service.js on lines 2..30
myems-admin/app/services/settings/store/storecommand.service.js on lines 2..30
myems-admin/app/services/settings/store/storepoint.service.js on lines 2..30
myems-admin/app/services/settings/store/storesensor.service.js on lines 2..30
myems-admin/app/services/settings/tenant/tenantcommand.service.js on lines 2..30
myems-admin/app/services/settings/tenant/tenantpoint.service.js on lines 2..30
myems-admin/app/services/settings/tenant/tenantsensor.service.js on lines 2..30
myems-admin/app/services/settings/virtualpowerplant/virtualpowerplantmicrogrid.service.js on lines 2..30

Duplicated Code

Duplicated code can lead to software that is hard to understand and difficult to change. The Don't Repeat Yourself (DRY) principle states:

Every piece of knowledge must have a single, unambiguous, authoritative representation within a system.

When you violate DRY, bugs and maintenance problems are sure to follow. Duplicated code has a tendency to both continue to replicate and also to diverge (leaving bugs as two similar implementations differ in subtle ways).

Tuning

This issue has a mass of 284.

We set useful threshold defaults for the languages we support but you may want to adjust these settings based on your project guidelines.

The threshold configuration represents the minimum mass a code block must have to be analyzed for duplication. The lower the threshold, the more fine-grained the comparison.

If the engine is too easily reporting duplication, try raising the threshold. If you suspect that the engine isn't catching enough duplication, try lowering the threshold. The best setting tends to differ from language to language.

See codeclimate-duplication's documentation for more information about tuning the mass threshold in your .codeclimate.yml.

Refactorings

Further Reading

Similar blocks of code found in 33 locations. Consider refactoring.
Open

app.factory('StoreSensorService', function($http) {
    return {
        addPair: function(storeID,sensorID, headers, callback) {
            $http.post(getAPI()+'stores/'+storeID+'/sensors',{data:{'sensor_id':sensorID}}, {headers})
            .then(function (response) {
Severity: Major
Found in myems-admin/app/services/settings/store/storesensor.service.js and 32 other locations - About 1 day to fix
myems-admin/app/services/settings/combinedequipment/combinedequipmentcommand.service.js on lines 2..30
myems-admin/app/services/settings/combinedequipment/combinedequipmentequipment.service.js on lines 2..30
myems-admin/app/services/settings/costcenter/costcentertariff.service.js on lines 2..29
myems-admin/app/services/settings/distributionsystem/distributioncircuitpoint.service.js on lines 2..30
myems-admin/app/services/settings/energystoragepowerstation/energystoragepowerstationcontainer.service.js on lines 2..30
myems-admin/app/services/settings/energystoragepowerstation/energystoragepowerstationuser.service.js on lines 2..30
myems-admin/app/services/settings/equipment/equipmentcommand.service.js on lines 2..30
myems-admin/app/services/settings/meter/metercommand.service.js on lines 2..30
myems-admin/app/services/settings/meter/meterpoint.service.js on lines 2..30
myems-admin/app/services/settings/microgrid/microgridsensor.service.js on lines 2..30
myems-admin/app/services/settings/microgrid/microgriduser.service.js on lines 2..30
myems-admin/app/services/settings/sensor/sensorpoint.service.js on lines 2..30
myems-admin/app/services/settings/shopfloor/shopfloorcommand.service.js on lines 2..30
myems-admin/app/services/settings/shopfloor/shopfloorequipment.service.js on lines 2..30
myems-admin/app/services/settings/shopfloor/shopfloorpoint.service.js on lines 2..30
myems-admin/app/services/settings/shopfloor/shopfloorsensor.service.js on lines 2..30
myems-admin/app/services/settings/space/spacecombinedequipment.service.js on lines 2..30
myems-admin/app/services/settings/space/spacecommand.service.js on lines 2..30
myems-admin/app/services/settings/space/spaceenergyflowdiagram.service.js on lines 2..30
myems-admin/app/services/settings/space/spaceenergystoragepowerstation.service.js on lines 2..30
myems-admin/app/services/settings/space/spaceequipment.service.js on lines 2..30
myems-admin/app/services/settings/space/spacepoint.service.js on lines 2..30
myems-admin/app/services/settings/space/spacesensor.service.js on lines 2..30
myems-admin/app/services/settings/space/spaceshopfloor.service.js on lines 2..30
myems-admin/app/services/settings/space/spacestore.service.js on lines 2..30
myems-admin/app/services/settings/space/spacetenant.service.js on lines 2..30
myems-admin/app/services/settings/store/storecommand.service.js on lines 2..30
myems-admin/app/services/settings/store/storepoint.service.js on lines 2..30
myems-admin/app/services/settings/tenant/tenantcommand.service.js on lines 2..30
myems-admin/app/services/settings/tenant/tenantpoint.service.js on lines 2..30
myems-admin/app/services/settings/tenant/tenantsensor.service.js on lines 2..30
myems-admin/app/services/settings/virtualpowerplant/virtualpowerplantmicrogrid.service.js on lines 2..30

Duplicated Code

Duplicated code can lead to software that is hard to understand and difficult to change. The Don't Repeat Yourself (DRY) principle states:

Every piece of knowledge must have a single, unambiguous, authoritative representation within a system.

When you violate DRY, bugs and maintenance problems are sure to follow. Duplicated code has a tendency to both continue to replicate and also to diverge (leaving bugs as two similar implementations differ in subtle ways).

Tuning

This issue has a mass of 284.

We set useful threshold defaults for the languages we support but you may want to adjust these settings based on your project guidelines.

The threshold configuration represents the minimum mass a code block must have to be analyzed for duplication. The lower the threshold, the more fine-grained the comparison.

If the engine is too easily reporting duplication, try raising the threshold. If you suspect that the engine isn't catching enough duplication, try lowering the threshold. The best setting tends to differ from language to language.

See codeclimate-duplication's documentation for more information about tuning the mass threshold in your .codeclimate.yml.

Refactorings

Further Reading

Similar blocks of code found in 33 locations. Consider refactoring.
Open

app.factory('MicrogridUserService', function($http) {
    return {
        addPair: function(microgridID,userID, headers, callback) {
            $http.post(getAPI()+'microgrids/'+microgridID+'/users',{data:{'user_id':userID}}, {headers})
            .then(function (response) {
Severity: Major
Found in myems-admin/app/services/settings/microgrid/microgriduser.service.js and 32 other locations - About 1 day to fix
myems-admin/app/services/settings/combinedequipment/combinedequipmentcommand.service.js on lines 2..30
myems-admin/app/services/settings/combinedequipment/combinedequipmentequipment.service.js on lines 2..30
myems-admin/app/services/settings/costcenter/costcentertariff.service.js on lines 2..29
myems-admin/app/services/settings/distributionsystem/distributioncircuitpoint.service.js on lines 2..30
myems-admin/app/services/settings/energystoragepowerstation/energystoragepowerstationcontainer.service.js on lines 2..30
myems-admin/app/services/settings/energystoragepowerstation/energystoragepowerstationuser.service.js on lines 2..30
myems-admin/app/services/settings/equipment/equipmentcommand.service.js on lines 2..30
myems-admin/app/services/settings/meter/metercommand.service.js on lines 2..30
myems-admin/app/services/settings/meter/meterpoint.service.js on lines 2..30
myems-admin/app/services/settings/microgrid/microgridsensor.service.js on lines 2..30
myems-admin/app/services/settings/sensor/sensorpoint.service.js on lines 2..30
myems-admin/app/services/settings/shopfloor/shopfloorcommand.service.js on lines 2..30
myems-admin/app/services/settings/shopfloor/shopfloorequipment.service.js on lines 2..30
myems-admin/app/services/settings/shopfloor/shopfloorpoint.service.js on lines 2..30
myems-admin/app/services/settings/shopfloor/shopfloorsensor.service.js on lines 2..30
myems-admin/app/services/settings/space/spacecombinedequipment.service.js on lines 2..30
myems-admin/app/services/settings/space/spacecommand.service.js on lines 2..30
myems-admin/app/services/settings/space/spaceenergyflowdiagram.service.js on lines 2..30
myems-admin/app/services/settings/space/spaceenergystoragepowerstation.service.js on lines 2..30
myems-admin/app/services/settings/space/spaceequipment.service.js on lines 2..30
myems-admin/app/services/settings/space/spacepoint.service.js on lines 2..30
myems-admin/app/services/settings/space/spacesensor.service.js on lines 2..30
myems-admin/app/services/settings/space/spaceshopfloor.service.js on lines 2..30
myems-admin/app/services/settings/space/spacestore.service.js on lines 2..30
myems-admin/app/services/settings/space/spacetenant.service.js on lines 2..30
myems-admin/app/services/settings/store/storecommand.service.js on lines 2..30
myems-admin/app/services/settings/store/storepoint.service.js on lines 2..30
myems-admin/app/services/settings/store/storesensor.service.js on lines 2..30
myems-admin/app/services/settings/tenant/tenantcommand.service.js on lines 2..30
myems-admin/app/services/settings/tenant/tenantpoint.service.js on lines 2..30
myems-admin/app/services/settings/tenant/tenantsensor.service.js on lines 2..30
myems-admin/app/services/settings/virtualpowerplant/virtualpowerplantmicrogrid.service.js on lines 2..30

Duplicated Code

Duplicated code can lead to software that is hard to understand and difficult to change. The Don't Repeat Yourself (DRY) principle states:

Every piece of knowledge must have a single, unambiguous, authoritative representation within a system.

When you violate DRY, bugs and maintenance problems are sure to follow. Duplicated code has a tendency to both continue to replicate and also to diverge (leaving bugs as two similar implementations differ in subtle ways).

Tuning

This issue has a mass of 284.

We set useful threshold defaults for the languages we support but you may want to adjust these settings based on your project guidelines.

The threshold configuration represents the minimum mass a code block must have to be analyzed for duplication. The lower the threshold, the more fine-grained the comparison.

If the engine is too easily reporting duplication, try raising the threshold. If you suspect that the engine isn't catching enough duplication, try lowering the threshold. The best setting tends to differ from language to language.

See codeclimate-duplication's documentation for more information about tuning the mass threshold in your .codeclimate.yml.

Refactorings

Further Reading

Similar blocks of code found in 33 locations. Consider refactoring.
Open

app.factory('SpaceStoreService', function($http) {
    return {
        addPair: function(spaceID,storeID, headers, callback) {
            $http.post(getAPI()+'spaces/'+spaceID+'/stores',{data:{'store_id':storeID}}, {headers})
            .then(function (response) {
Severity: Major
Found in myems-admin/app/services/settings/space/spacestore.service.js and 32 other locations - About 1 day to fix
myems-admin/app/services/settings/combinedequipment/combinedequipmentcommand.service.js on lines 2..30
myems-admin/app/services/settings/combinedequipment/combinedequipmentequipment.service.js on lines 2..30
myems-admin/app/services/settings/costcenter/costcentertariff.service.js on lines 2..29
myems-admin/app/services/settings/distributionsystem/distributioncircuitpoint.service.js on lines 2..30
myems-admin/app/services/settings/energystoragepowerstation/energystoragepowerstationcontainer.service.js on lines 2..30
myems-admin/app/services/settings/energystoragepowerstation/energystoragepowerstationuser.service.js on lines 2..30
myems-admin/app/services/settings/equipment/equipmentcommand.service.js on lines 2..30
myems-admin/app/services/settings/meter/metercommand.service.js on lines 2..30
myems-admin/app/services/settings/meter/meterpoint.service.js on lines 2..30
myems-admin/app/services/settings/microgrid/microgridsensor.service.js on lines 2..30
myems-admin/app/services/settings/microgrid/microgriduser.service.js on lines 2..30
myems-admin/app/services/settings/sensor/sensorpoint.service.js on lines 2..30
myems-admin/app/services/settings/shopfloor/shopfloorcommand.service.js on lines 2..30
myems-admin/app/services/settings/shopfloor/shopfloorequipment.service.js on lines 2..30
myems-admin/app/services/settings/shopfloor/shopfloorpoint.service.js on lines 2..30
myems-admin/app/services/settings/shopfloor/shopfloorsensor.service.js on lines 2..30
myems-admin/app/services/settings/space/spacecombinedequipment.service.js on lines 2..30
myems-admin/app/services/settings/space/spacecommand.service.js on lines 2..30
myems-admin/app/services/settings/space/spaceenergyflowdiagram.service.js on lines 2..30
myems-admin/app/services/settings/space/spaceenergystoragepowerstation.service.js on lines 2..30
myems-admin/app/services/settings/space/spaceequipment.service.js on lines 2..30
myems-admin/app/services/settings/space/spacepoint.service.js on lines 2..30
myems-admin/app/services/settings/space/spacesensor.service.js on lines 2..30
myems-admin/app/services/settings/space/spaceshopfloor.service.js on lines 2..30
myems-admin/app/services/settings/space/spacetenant.service.js on lines 2..30
myems-admin/app/services/settings/store/storecommand.service.js on lines 2..30
myems-admin/app/services/settings/store/storepoint.service.js on lines 2..30
myems-admin/app/services/settings/store/storesensor.service.js on lines 2..30
myems-admin/app/services/settings/tenant/tenantcommand.service.js on lines 2..30
myems-admin/app/services/settings/tenant/tenantpoint.service.js on lines 2..30
myems-admin/app/services/settings/tenant/tenantsensor.service.js on lines 2..30
myems-admin/app/services/settings/virtualpowerplant/virtualpowerplantmicrogrid.service.js on lines 2..30

Duplicated Code

Duplicated code can lead to software that is hard to understand and difficult to change. The Don't Repeat Yourself (DRY) principle states:

Every piece of knowledge must have a single, unambiguous, authoritative representation within a system.

When you violate DRY, bugs and maintenance problems are sure to follow. Duplicated code has a tendency to both continue to replicate and also to diverge (leaving bugs as two similar implementations differ in subtle ways).

Tuning

This issue has a mass of 284.

We set useful threshold defaults for the languages we support but you may want to adjust these settings based on your project guidelines.

The threshold configuration represents the minimum mass a code block must have to be analyzed for duplication. The lower the threshold, the more fine-grained the comparison.

If the engine is too easily reporting duplication, try raising the threshold. If you suspect that the engine isn't catching enough duplication, try lowering the threshold. The best setting tends to differ from language to language.

See codeclimate-duplication's documentation for more information about tuning the mass threshold in your .codeclimate.yml.

Refactorings

Further Reading

Similar blocks of code found in 33 locations. Consider refactoring.
Open

app.factory('EnergyStoragePowerStationContainerService', function($http) {
    return {
        addPair: function(energystoragepowerstationID,containerID, headers, callback) {
            $http.post(getAPI()+'energystoragepowerstations/'+energystoragepowerstationID+'/containers',{data:{'energy_storage_container_id':containerID}}, {headers})
            .then(function (response) {
Severity: Major
Found in myems-admin/app/services/settings/energystoragepowerstation/energystoragepowerstationcontainer.service.js and 32 other locations - About 1 day to fix
myems-admin/app/services/settings/combinedequipment/combinedequipmentcommand.service.js on lines 2..30
myems-admin/app/services/settings/combinedequipment/combinedequipmentequipment.service.js on lines 2..30
myems-admin/app/services/settings/costcenter/costcentertariff.service.js on lines 2..29
myems-admin/app/services/settings/distributionsystem/distributioncircuitpoint.service.js on lines 2..30
myems-admin/app/services/settings/energystoragepowerstation/energystoragepowerstationuser.service.js on lines 2..30
myems-admin/app/services/settings/equipment/equipmentcommand.service.js on lines 2..30
myems-admin/app/services/settings/meter/metercommand.service.js on lines 2..30
myems-admin/app/services/settings/meter/meterpoint.service.js on lines 2..30
myems-admin/app/services/settings/microgrid/microgridsensor.service.js on lines 2..30
myems-admin/app/services/settings/microgrid/microgriduser.service.js on lines 2..30
myems-admin/app/services/settings/sensor/sensorpoint.service.js on lines 2..30
myems-admin/app/services/settings/shopfloor/shopfloorcommand.service.js on lines 2..30
myems-admin/app/services/settings/shopfloor/shopfloorequipment.service.js on lines 2..30
myems-admin/app/services/settings/shopfloor/shopfloorpoint.service.js on lines 2..30
myems-admin/app/services/settings/shopfloor/shopfloorsensor.service.js on lines 2..30
myems-admin/app/services/settings/space/spacecombinedequipment.service.js on lines 2..30
myems-admin/app/services/settings/space/spacecommand.service.js on lines 2..30
myems-admin/app/services/settings/space/spaceenergyflowdiagram.service.js on lines 2..30
myems-admin/app/services/settings/space/spaceenergystoragepowerstation.service.js on lines 2..30
myems-admin/app/services/settings/space/spaceequipment.service.js on lines 2..30
myems-admin/app/services/settings/space/spacepoint.service.js on lines 2..30
myems-admin/app/services/settings/space/spacesensor.service.js on lines 2..30
myems-admin/app/services/settings/space/spaceshopfloor.service.js on lines 2..30
myems-admin/app/services/settings/space/spacestore.service.js on lines 2..30
myems-admin/app/services/settings/space/spacetenant.service.js on lines 2..30
myems-admin/app/services/settings/store/storecommand.service.js on lines 2..30
myems-admin/app/services/settings/store/storepoint.service.js on lines 2..30
myems-admin/app/services/settings/store/storesensor.service.js on lines 2..30
myems-admin/app/services/settings/tenant/tenantcommand.service.js on lines 2..30
myems-admin/app/services/settings/tenant/tenantpoint.service.js on lines 2..30
myems-admin/app/services/settings/tenant/tenantsensor.service.js on lines 2..30
myems-admin/app/services/settings/virtualpowerplant/virtualpowerplantmicrogrid.service.js on lines 2..30

Duplicated Code

Duplicated code can lead to software that is hard to understand and difficult to change. The Don't Repeat Yourself (DRY) principle states:

Every piece of knowledge must have a single, unambiguous, authoritative representation within a system.

When you violate DRY, bugs and maintenance problems are sure to follow. Duplicated code has a tendency to both continue to replicate and also to diverge (leaving bugs as two similar implementations differ in subtle ways).

Tuning

This issue has a mass of 284.

We set useful threshold defaults for the languages we support but you may want to adjust these settings based on your project guidelines.

The threshold configuration represents the minimum mass a code block must have to be analyzed for duplication. The lower the threshold, the more fine-grained the comparison.

If the engine is too easily reporting duplication, try raising the threshold. If you suspect that the engine isn't catching enough duplication, try lowering the threshold. The best setting tends to differ from language to language.

See codeclimate-duplication's documentation for more information about tuning the mass threshold in your .codeclimate.yml.

Refactorings

Further Reading

Similar blocks of code found in 33 locations. Consider refactoring.
Open

app.factory('SensorPointService', function($http) {
    return {
        addPair: function(sensorID,pointID, headers, callback) {
            $http.post(getAPI()+'sensors/'+sensorID+'/points',{data:{'point_id':pointID}}, {headers})
            .then(function (response) {
Severity: Major
Found in myems-admin/app/services/settings/sensor/sensorpoint.service.js and 32 other locations - About 1 day to fix
myems-admin/app/services/settings/combinedequipment/combinedequipmentcommand.service.js on lines 2..30
myems-admin/app/services/settings/combinedequipment/combinedequipmentequipment.service.js on lines 2..30
myems-admin/app/services/settings/costcenter/costcentertariff.service.js on lines 2..29
myems-admin/app/services/settings/distributionsystem/distributioncircuitpoint.service.js on lines 2..30
myems-admin/app/services/settings/energystoragepowerstation/energystoragepowerstationcontainer.service.js on lines 2..30
myems-admin/app/services/settings/energystoragepowerstation/energystoragepowerstationuser.service.js on lines 2..30
myems-admin/app/services/settings/equipment/equipmentcommand.service.js on lines 2..30
myems-admin/app/services/settings/meter/metercommand.service.js on lines 2..30
myems-admin/app/services/settings/meter/meterpoint.service.js on lines 2..30
myems-admin/app/services/settings/microgrid/microgridsensor.service.js on lines 2..30
myems-admin/app/services/settings/microgrid/microgriduser.service.js on lines 2..30
myems-admin/app/services/settings/shopfloor/shopfloorcommand.service.js on lines 2..30
myems-admin/app/services/settings/shopfloor/shopfloorequipment.service.js on lines 2..30
myems-admin/app/services/settings/shopfloor/shopfloorpoint.service.js on lines 2..30
myems-admin/app/services/settings/shopfloor/shopfloorsensor.service.js on lines 2..30
myems-admin/app/services/settings/space/spacecombinedequipment.service.js on lines 2..30
myems-admin/app/services/settings/space/spacecommand.service.js on lines 2..30
myems-admin/app/services/settings/space/spaceenergyflowdiagram.service.js on lines 2..30
myems-admin/app/services/settings/space/spaceenergystoragepowerstation.service.js on lines 2..30
myems-admin/app/services/settings/space/spaceequipment.service.js on lines 2..30
myems-admin/app/services/settings/space/spacepoint.service.js on lines 2..30
myems-admin/app/services/settings/space/spacesensor.service.js on lines 2..30
myems-admin/app/services/settings/space/spaceshopfloor.service.js on lines 2..30
myems-admin/app/services/settings/space/spacestore.service.js on lines 2..30
myems-admin/app/services/settings/space/spacetenant.service.js on lines 2..30
myems-admin/app/services/settings/store/storecommand.service.js on lines 2..30
myems-admin/app/services/settings/store/storepoint.service.js on lines 2..30
myems-admin/app/services/settings/store/storesensor.service.js on lines 2..30
myems-admin/app/services/settings/tenant/tenantcommand.service.js on lines 2..30
myems-admin/app/services/settings/tenant/tenantpoint.service.js on lines 2..30
myems-admin/app/services/settings/tenant/tenantsensor.service.js on lines 2..30
myems-admin/app/services/settings/virtualpowerplant/virtualpowerplantmicrogrid.service.js on lines 2..30

Duplicated Code

Duplicated code can lead to software that is hard to understand and difficult to change. The Don't Repeat Yourself (DRY) principle states:

Every piece of knowledge must have a single, unambiguous, authoritative representation within a system.

When you violate DRY, bugs and maintenance problems are sure to follow. Duplicated code has a tendency to both continue to replicate and also to diverge (leaving bugs as two similar implementations differ in subtle ways).

Tuning

This issue has a mass of 284.

We set useful threshold defaults for the languages we support but you may want to adjust these settings based on your project guidelines.

The threshold configuration represents the minimum mass a code block must have to be analyzed for duplication. The lower the threshold, the more fine-grained the comparison.

If the engine is too easily reporting duplication, try raising the threshold. If you suspect that the engine isn't catching enough duplication, try lowering the threshold. The best setting tends to differ from language to language.

See codeclimate-duplication's documentation for more information about tuning the mass threshold in your .codeclimate.yml.

Refactorings

Further Reading

Similar blocks of code found in 33 locations. Consider refactoring.
Open

app.factory('ShopfloorSensorService', function($http) {
    return {
        addPair: function(shopfloorID,sensorID, headers, callback) {
            $http.post(getAPI()+'shopfloors/'+shopfloorID+'/sensors',{data:{'sensor_id':sensorID}}, {headers})
            .then(function (response) {
Severity: Major
Found in myems-admin/app/services/settings/shopfloor/shopfloorsensor.service.js and 32 other locations - About 1 day to fix
myems-admin/app/services/settings/combinedequipment/combinedequipmentcommand.service.js on lines 2..30
myems-admin/app/services/settings/combinedequipment/combinedequipmentequipment.service.js on lines 2..30
myems-admin/app/services/settings/costcenter/costcentertariff.service.js on lines 2..29
myems-admin/app/services/settings/distributionsystem/distributioncircuitpoint.service.js on lines 2..30
myems-admin/app/services/settings/energystoragepowerstation/energystoragepowerstationcontainer.service.js on lines 2..30
myems-admin/app/services/settings/energystoragepowerstation/energystoragepowerstationuser.service.js on lines 2..30
myems-admin/app/services/settings/equipment/equipmentcommand.service.js on lines 2..30
myems-admin/app/services/settings/meter/metercommand.service.js on lines 2..30
myems-admin/app/services/settings/meter/meterpoint.service.js on lines 2..30
myems-admin/app/services/settings/microgrid/microgridsensor.service.js on lines 2..30
myems-admin/app/services/settings/microgrid/microgriduser.service.js on lines 2..30
myems-admin/app/services/settings/sensor/sensorpoint.service.js on lines 2..30
myems-admin/app/services/settings/shopfloor/shopfloorcommand.service.js on lines 2..30
myems-admin/app/services/settings/shopfloor/shopfloorequipment.service.js on lines 2..30
myems-admin/app/services/settings/shopfloor/shopfloorpoint.service.js on lines 2..30
myems-admin/app/services/settings/space/spacecombinedequipment.service.js on lines 2..30
myems-admin/app/services/settings/space/spacecommand.service.js on lines 2..30
myems-admin/app/services/settings/space/spaceenergyflowdiagram.service.js on lines 2..30
myems-admin/app/services/settings/space/spaceenergystoragepowerstation.service.js on lines 2..30
myems-admin/app/services/settings/space/spaceequipment.service.js on lines 2..30
myems-admin/app/services/settings/space/spacepoint.service.js on lines 2..30
myems-admin/app/services/settings/space/spacesensor.service.js on lines 2..30
myems-admin/app/services/settings/space/spaceshopfloor.service.js on lines 2..30
myems-admin/app/services/settings/space/spacestore.service.js on lines 2..30
myems-admin/app/services/settings/space/spacetenant.service.js on lines 2..30
myems-admin/app/services/settings/store/storecommand.service.js on lines 2..30
myems-admin/app/services/settings/store/storepoint.service.js on lines 2..30
myems-admin/app/services/settings/store/storesensor.service.js on lines 2..30
myems-admin/app/services/settings/tenant/tenantcommand.service.js on lines 2..30
myems-admin/app/services/settings/tenant/tenantpoint.service.js on lines 2..30
myems-admin/app/services/settings/tenant/tenantsensor.service.js on lines 2..30
myems-admin/app/services/settings/virtualpowerplant/virtualpowerplantmicrogrid.service.js on lines 2..30

Duplicated Code

Duplicated code can lead to software that is hard to understand and difficult to change. The Don't Repeat Yourself (DRY) principle states:

Every piece of knowledge must have a single, unambiguous, authoritative representation within a system.

When you violate DRY, bugs and maintenance problems are sure to follow. Duplicated code has a tendency to both continue to replicate and also to diverge (leaving bugs as two similar implementations differ in subtle ways).

Tuning

This issue has a mass of 284.

We set useful threshold defaults for the languages we support but you may want to adjust these settings based on your project guidelines.

The threshold configuration represents the minimum mass a code block must have to be analyzed for duplication. The lower the threshold, the more fine-grained the comparison.

If the engine is too easily reporting duplication, try raising the threshold. If you suspect that the engine isn't catching enough duplication, try lowering the threshold. The best setting tends to differ from language to language.

See codeclimate-duplication's documentation for more information about tuning the mass threshold in your .codeclimate.yml.

Refactorings

Further Reading

Similar blocks of code found in 33 locations. Consider refactoring.
Open

app.factory('ShopfloorCommandService', function($http) {
    return {
        addPair: function(shopfloorID,commandID, headers, callback) {
            $http.post(getAPI()+'shopfloors/'+shopfloorID+'/commands',{data:{'command_id':commandID}}, {headers})
            .then(function (response) {
Severity: Major
Found in myems-admin/app/services/settings/shopfloor/shopfloorcommand.service.js and 32 other locations - About 1 day to fix
myems-admin/app/services/settings/combinedequipment/combinedequipmentcommand.service.js on lines 2..30
myems-admin/app/services/settings/combinedequipment/combinedequipmentequipment.service.js on lines 2..30
myems-admin/app/services/settings/costcenter/costcentertariff.service.js on lines 2..29
myems-admin/app/services/settings/distributionsystem/distributioncircuitpoint.service.js on lines 2..30
myems-admin/app/services/settings/energystoragepowerstation/energystoragepowerstationcontainer.service.js on lines 2..30
myems-admin/app/services/settings/energystoragepowerstation/energystoragepowerstationuser.service.js on lines 2..30
myems-admin/app/services/settings/equipment/equipmentcommand.service.js on lines 2..30
myems-admin/app/services/settings/meter/metercommand.service.js on lines 2..30
myems-admin/app/services/settings/meter/meterpoint.service.js on lines 2..30
myems-admin/app/services/settings/microgrid/microgridsensor.service.js on lines 2..30
myems-admin/app/services/settings/microgrid/microgriduser.service.js on lines 2..30
myems-admin/app/services/settings/sensor/sensorpoint.service.js on lines 2..30
myems-admin/app/services/settings/shopfloor/shopfloorequipment.service.js on lines 2..30
myems-admin/app/services/settings/shopfloor/shopfloorpoint.service.js on lines 2..30
myems-admin/app/services/settings/shopfloor/shopfloorsensor.service.js on lines 2..30
myems-admin/app/services/settings/space/spacecombinedequipment.service.js on lines 2..30
myems-admin/app/services/settings/space/spacecommand.service.js on lines 2..30
myems-admin/app/services/settings/space/spaceenergyflowdiagram.service.js on lines 2..30
myems-admin/app/services/settings/space/spaceenergystoragepowerstation.service.js on lines 2..30
myems-admin/app/services/settings/space/spaceequipment.service.js on lines 2..30
myems-admin/app/services/settings/space/spacepoint.service.js on lines 2..30
myems-admin/app/services/settings/space/spacesensor.service.js on lines 2..30
myems-admin/app/services/settings/space/spaceshopfloor.service.js on lines 2..30
myems-admin/app/services/settings/space/spacestore.service.js on lines 2..30
myems-admin/app/services/settings/space/spacetenant.service.js on lines 2..30
myems-admin/app/services/settings/store/storecommand.service.js on lines 2..30
myems-admin/app/services/settings/store/storepoint.service.js on lines 2..30
myems-admin/app/services/settings/store/storesensor.service.js on lines 2..30
myems-admin/app/services/settings/tenant/tenantcommand.service.js on lines 2..30
myems-admin/app/services/settings/tenant/tenantpoint.service.js on lines 2..30
myems-admin/app/services/settings/tenant/tenantsensor.service.js on lines 2..30
myems-admin/app/services/settings/virtualpowerplant/virtualpowerplantmicrogrid.service.js on lines 2..30

Duplicated Code

Duplicated code can lead to software that is hard to understand and difficult to change. The Don't Repeat Yourself (DRY) principle states:

Every piece of knowledge must have a single, unambiguous, authoritative representation within a system.

When you violate DRY, bugs and maintenance problems are sure to follow. Duplicated code has a tendency to both continue to replicate and also to diverge (leaving bugs as two similar implementations differ in subtle ways).

Tuning

This issue has a mass of 284.

We set useful threshold defaults for the languages we support but you may want to adjust these settings based on your project guidelines.

The threshold configuration represents the minimum mass a code block must have to be analyzed for duplication. The lower the threshold, the more fine-grained the comparison.

If the engine is too easily reporting duplication, try raising the threshold. If you suspect that the engine isn't catching enough duplication, try lowering the threshold. The best setting tends to differ from language to language.

See codeclimate-duplication's documentation for more information about tuning the mass threshold in your .codeclimate.yml.

Refactorings

Further Reading

Identical blocks of code found in 2 locations. Consider refactoring.
Open

if (!Array.prototype.indexOf) {
        Array.prototype.indexOf = function (searchElement, fromIndex) {
                var k;

                // 1. Let O be the result of calling ToObject passing
Severity: Major
Found in myems-admin/js/plugins/oclazyload/ocLazyLoad.js and 1 other location - About 1 day to fix
myems-admin/js/plugins/jvectormap/jquery-jvectormap-2.0.2.min.js on lines 367..429

Duplicated Code

Duplicated code can lead to software that is hard to understand and difficult to change. The Don't Repeat Yourself (DRY) principle states:

Every piece of knowledge must have a single, unambiguous, authoritative representation within a system.

When you violate DRY, bugs and maintenance problems are sure to follow. Duplicated code has a tendency to both continue to replicate and also to diverge (leaving bugs as two similar implementations differ in subtle ways).

Tuning

This issue has a mass of 284.

We set useful threshold defaults for the languages we support but you may want to adjust these settings based on your project guidelines.

The threshold configuration represents the minimum mass a code block must have to be analyzed for duplication. The lower the threshold, the more fine-grained the comparison.

If the engine is too easily reporting duplication, try raising the threshold. If you suspect that the engine isn't catching enough duplication, try lowering the threshold. The best setting tends to differ from language to language.

See codeclimate-duplication's documentation for more information about tuning the mass threshold in your .codeclimate.yml.

Refactorings

Further Reading

Similar blocks of code found in 33 locations. Consider refactoring.
Open

app.factory('CombinedEquipmentCommandService', function($http) {
    return {
        addPair: function(combinedequipmentID,commandID, headers, callback) {
            $http.post(getAPI()+'combinedequipments/'+combinedequipmentID+'/commands',{data:{'command_id':commandID}}, {headers})
            .then(function (response) {
Severity: Major
Found in myems-admin/app/services/settings/combinedequipment/combinedequipmentcommand.service.js and 32 other locations - About 1 day to fix
myems-admin/app/services/settings/combinedequipment/combinedequipmentequipment.service.js on lines 2..30
myems-admin/app/services/settings/costcenter/costcentertariff.service.js on lines 2..29
myems-admin/app/services/settings/distributionsystem/distributioncircuitpoint.service.js on lines 2..30
myems-admin/app/services/settings/energystoragepowerstation/energystoragepowerstationcontainer.service.js on lines 2..30
myems-admin/app/services/settings/energystoragepowerstation/energystoragepowerstationuser.service.js on lines 2..30
myems-admin/app/services/settings/equipment/equipmentcommand.service.js on lines 2..30
myems-admin/app/services/settings/meter/metercommand.service.js on lines 2..30
myems-admin/app/services/settings/meter/meterpoint.service.js on lines 2..30
myems-admin/app/services/settings/microgrid/microgridsensor.service.js on lines 2..30
myems-admin/app/services/settings/microgrid/microgriduser.service.js on lines 2..30
myems-admin/app/services/settings/sensor/sensorpoint.service.js on lines 2..30
myems-admin/app/services/settings/shopfloor/shopfloorcommand.service.js on lines 2..30
myems-admin/app/services/settings/shopfloor/shopfloorequipment.service.js on lines 2..30
myems-admin/app/services/settings/shopfloor/shopfloorpoint.service.js on lines 2..30
myems-admin/app/services/settings/shopfloor/shopfloorsensor.service.js on lines 2..30
myems-admin/app/services/settings/space/spacecombinedequipment.service.js on lines 2..30
myems-admin/app/services/settings/space/spacecommand.service.js on lines 2..30
myems-admin/app/services/settings/space/spaceenergyflowdiagram.service.js on lines 2..30
myems-admin/app/services/settings/space/spaceenergystoragepowerstation.service.js on lines 2..30
myems-admin/app/services/settings/space/spaceequipment.service.js on lines 2..30
myems-admin/app/services/settings/space/spacepoint.service.js on lines 2..30
myems-admin/app/services/settings/space/spacesensor.service.js on lines 2..30
myems-admin/app/services/settings/space/spaceshopfloor.service.js on lines 2..30
myems-admin/app/services/settings/space/spacestore.service.js on lines 2..30
myems-admin/app/services/settings/space/spacetenant.service.js on lines 2..30
myems-admin/app/services/settings/store/storecommand.service.js on lines 2..30
myems-admin/app/services/settings/store/storepoint.service.js on lines 2..30
myems-admin/app/services/settings/store/storesensor.service.js on lines 2..30
myems-admin/app/services/settings/tenant/tenantcommand.service.js on lines 2..30
myems-admin/app/services/settings/tenant/tenantpoint.service.js on lines 2..30
myems-admin/app/services/settings/tenant/tenantsensor.service.js on lines 2..30
myems-admin/app/services/settings/virtualpowerplant/virtualpowerplantmicrogrid.service.js on lines 2..30

Duplicated Code

Duplicated code can lead to software that is hard to understand and difficult to change. The Don't Repeat Yourself (DRY) principle states:

Every piece of knowledge must have a single, unambiguous, authoritative representation within a system.

When you violate DRY, bugs and maintenance problems are sure to follow. Duplicated code has a tendency to both continue to replicate and also to diverge (leaving bugs as two similar implementations differ in subtle ways).

Tuning

This issue has a mass of 284.

We set useful threshold defaults for the languages we support but you may want to adjust these settings based on your project guidelines.

The threshold configuration represents the minimum mass a code block must have to be analyzed for duplication. The lower the threshold, the more fine-grained the comparison.

If the engine is too easily reporting duplication, try raising the threshold. If you suspect that the engine isn't catching enough duplication, try lowering the threshold. The best setting tends to differ from language to language.

See codeclimate-duplication's documentation for more information about tuning the mass threshold in your .codeclimate.yml.

Refactorings

Further Reading

Similar blocks of code found in 33 locations. Consider refactoring.
Open

app.factory('ShopfloorEquipmentService', function($http) {
    return {
        addPair: function(shopfloorID,equipmentID, headers, callback) {
            $http.post(getAPI()+'shopfloors/'+shopfloorID+'/equipments',{data:{'equipment_id':equipmentID}}, {headers})
            .then(function (response) {
Severity: Major
Found in myems-admin/app/services/settings/shopfloor/shopfloorequipment.service.js and 32 other locations - About 1 day to fix
myems-admin/app/services/settings/combinedequipment/combinedequipmentcommand.service.js on lines 2..30
myems-admin/app/services/settings/combinedequipment/combinedequipmentequipment.service.js on lines 2..30
myems-admin/app/services/settings/costcenter/costcentertariff.service.js on lines 2..29
myems-admin/app/services/settings/distributionsystem/distributioncircuitpoint.service.js on lines 2..30
myems-admin/app/services/settings/energystoragepowerstation/energystoragepowerstationcontainer.service.js on lines 2..30
myems-admin/app/services/settings/energystoragepowerstation/energystoragepowerstationuser.service.js on lines 2..30
myems-admin/app/services/settings/equipment/equipmentcommand.service.js on lines 2..30
myems-admin/app/services/settings/meter/metercommand.service.js on lines 2..30
myems-admin/app/services/settings/meter/meterpoint.service.js on lines 2..30
myems-admin/app/services/settings/microgrid/microgridsensor.service.js on lines 2..30
myems-admin/app/services/settings/microgrid/microgriduser.service.js on lines 2..30
myems-admin/app/services/settings/sensor/sensorpoint.service.js on lines 2..30
myems-admin/app/services/settings/shopfloor/shopfloorcommand.service.js on lines 2..30
myems-admin/app/services/settings/shopfloor/shopfloorpoint.service.js on lines 2..30
myems-admin/app/services/settings/shopfloor/shopfloorsensor.service.js on lines 2..30
myems-admin/app/services/settings/space/spacecombinedequipment.service.js on lines 2..30
myems-admin/app/services/settings/space/spacecommand.service.js on lines 2..30
myems-admin/app/services/settings/space/spaceenergyflowdiagram.service.js on lines 2..30
myems-admin/app/services/settings/space/spaceenergystoragepowerstation.service.js on lines 2..30
myems-admin/app/services/settings/space/spaceequipment.service.js on lines 2..30
myems-admin/app/services/settings/space/spacepoint.service.js on lines 2..30
myems-admin/app/services/settings/space/spacesensor.service.js on lines 2..30
myems-admin/app/services/settings/space/spaceshopfloor.service.js on lines 2..30
myems-admin/app/services/settings/space/spacestore.service.js on lines 2..30
myems-admin/app/services/settings/space/spacetenant.service.js on lines 2..30
myems-admin/app/services/settings/store/storecommand.service.js on lines 2..30
myems-admin/app/services/settings/store/storepoint.service.js on lines 2..30
myems-admin/app/services/settings/store/storesensor.service.js on lines 2..30
myems-admin/app/services/settings/tenant/tenantcommand.service.js on lines 2..30
myems-admin/app/services/settings/tenant/tenantpoint.service.js on lines 2..30
myems-admin/app/services/settings/tenant/tenantsensor.service.js on lines 2..30
myems-admin/app/services/settings/virtualpowerplant/virtualpowerplantmicrogrid.service.js on lines 2..30

Duplicated Code

Duplicated code can lead to software that is hard to understand and difficult to change. The Don't Repeat Yourself (DRY) principle states:

Every piece of knowledge must have a single, unambiguous, authoritative representation within a system.

When you violate DRY, bugs and maintenance problems are sure to follow. Duplicated code has a tendency to both continue to replicate and also to diverge (leaving bugs as two similar implementations differ in subtle ways).

Tuning

This issue has a mass of 284.

We set useful threshold defaults for the languages we support but you may want to adjust these settings based on your project guidelines.

The threshold configuration represents the minimum mass a code block must have to be analyzed for duplication. The lower the threshold, the more fine-grained the comparison.

If the engine is too easily reporting duplication, try raising the threshold. If you suspect that the engine isn't catching enough duplication, try lowering the threshold. The best setting tends to differ from language to language.

See codeclimate-duplication's documentation for more information about tuning the mass threshold in your .codeclimate.yml.

Refactorings

Further Reading

Similar blocks of code found in 33 locations. Consider refactoring.
Open

app.factory('TenantSensorService', function($http) {
    return {
        addPair: function(tenantID,sensorID, headers, callback) {
            $http.post(getAPI()+'tenants/'+tenantID+'/sensors',{data:{'sensor_id':sensorID}}, {headers})
            .then(function (response) {
Severity: Major
Found in myems-admin/app/services/settings/tenant/tenantsensor.service.js and 32 other locations - About 1 day to fix
myems-admin/app/services/settings/combinedequipment/combinedequipmentcommand.service.js on lines 2..30
myems-admin/app/services/settings/combinedequipment/combinedequipmentequipment.service.js on lines 2..30
myems-admin/app/services/settings/costcenter/costcentertariff.service.js on lines 2..29
myems-admin/app/services/settings/distributionsystem/distributioncircuitpoint.service.js on lines 2..30
myems-admin/app/services/settings/energystoragepowerstation/energystoragepowerstationcontainer.service.js on lines 2..30
myems-admin/app/services/settings/energystoragepowerstation/energystoragepowerstationuser.service.js on lines 2..30
myems-admin/app/services/settings/equipment/equipmentcommand.service.js on lines 2..30
myems-admin/app/services/settings/meter/metercommand.service.js on lines 2..30
myems-admin/app/services/settings/meter/meterpoint.service.js on lines 2..30
myems-admin/app/services/settings/microgrid/microgridsensor.service.js on lines 2..30
myems-admin/app/services/settings/microgrid/microgriduser.service.js on lines 2..30
myems-admin/app/services/settings/sensor/sensorpoint.service.js on lines 2..30
myems-admin/app/services/settings/shopfloor/shopfloorcommand.service.js on lines 2..30
myems-admin/app/services/settings/shopfloor/shopfloorequipment.service.js on lines 2..30
myems-admin/app/services/settings/shopfloor/shopfloorpoint.service.js on lines 2..30
myems-admin/app/services/settings/shopfloor/shopfloorsensor.service.js on lines 2..30
myems-admin/app/services/settings/space/spacecombinedequipment.service.js on lines 2..30
myems-admin/app/services/settings/space/spacecommand.service.js on lines 2..30
myems-admin/app/services/settings/space/spaceenergyflowdiagram.service.js on lines 2..30
myems-admin/app/services/settings/space/spaceenergystoragepowerstation.service.js on lines 2..30
myems-admin/app/services/settings/space/spaceequipment.service.js on lines 2..30
myems-admin/app/services/settings/space/spacepoint.service.js on lines 2..30
myems-admin/app/services/settings/space/spacesensor.service.js on lines 2..30
myems-admin/app/services/settings/space/spaceshopfloor.service.js on lines 2..30
myems-admin/app/services/settings/space/spacestore.service.js on lines 2..30
myems-admin/app/services/settings/space/spacetenant.service.js on lines 2..30
myems-admin/app/services/settings/store/storecommand.service.js on lines 2..30
myems-admin/app/services/settings/store/storepoint.service.js on lines 2..30
myems-admin/app/services/settings/store/storesensor.service.js on lines 2..30
myems-admin/app/services/settings/tenant/tenantcommand.service.js on lines 2..30
myems-admin/app/services/settings/tenant/tenantpoint.service.js on lines 2..30
myems-admin/app/services/settings/virtualpowerplant/virtualpowerplantmicrogrid.service.js on lines 2..30

Duplicated Code

Duplicated code can lead to software that is hard to understand and difficult to change. The Don't Repeat Yourself (DRY) principle states:

Every piece of knowledge must have a single, unambiguous, authoritative representation within a system.

When you violate DRY, bugs and maintenance problems are sure to follow. Duplicated code has a tendency to both continue to replicate and also to diverge (leaving bugs as two similar implementations differ in subtle ways).

Tuning

This issue has a mass of 284.

We set useful threshold defaults for the languages we support but you may want to adjust these settings based on your project guidelines.

The threshold configuration represents the minimum mass a code block must have to be analyzed for duplication. The lower the threshold, the more fine-grained the comparison.

If the engine is too easily reporting duplication, try raising the threshold. If you suspect that the engine isn't catching enough duplication, try lowering the threshold. The best setting tends to differ from language to language.

See codeclimate-duplication's documentation for more information about tuning the mass threshold in your .codeclimate.yml.

Refactorings

Further Reading

Similar blocks of code found in 33 locations. Consider refactoring.
Open

app.factory('SpaceSensorService', function($http) {
    return {
        addPair: function(spaceID,sensorID, headers, callback) {
            $http.post(getAPI()+'spaces/'+spaceID+'/sensors',{data:{'sensor_id':sensorID}}, {headers})
            .then(function (response) {
Severity: Major
Found in myems-admin/app/services/settings/space/spacesensor.service.js and 32 other locations - About 1 day to fix
myems-admin/app/services/settings/combinedequipment/combinedequipmentcommand.service.js on lines 2..30
myems-admin/app/services/settings/combinedequipment/combinedequipmentequipment.service.js on lines 2..30
myems-admin/app/services/settings/costcenter/costcentertariff.service.js on lines 2..29
myems-admin/app/services/settings/distributionsystem/distributioncircuitpoint.service.js on lines 2..30
myems-admin/app/services/settings/energystoragepowerstation/energystoragepowerstationcontainer.service.js on lines 2..30
myems-admin/app/services/settings/energystoragepowerstation/energystoragepowerstationuser.service.js on lines 2..30
myems-admin/app/services/settings/equipment/equipmentcommand.service.js on lines 2..30
myems-admin/app/services/settings/meter/metercommand.service.js on lines 2..30
myems-admin/app/services/settings/meter/meterpoint.service.js on lines 2..30
myems-admin/app/services/settings/microgrid/microgridsensor.service.js on lines 2..30
myems-admin/app/services/settings/microgrid/microgriduser.service.js on lines 2..30
myems-admin/app/services/settings/sensor/sensorpoint.service.js on lines 2..30
myems-admin/app/services/settings/shopfloor/shopfloorcommand.service.js on lines 2..30
myems-admin/app/services/settings/shopfloor/shopfloorequipment.service.js on lines 2..30
myems-admin/app/services/settings/shopfloor/shopfloorpoint.service.js on lines 2..30
myems-admin/app/services/settings/shopfloor/shopfloorsensor.service.js on lines 2..30
myems-admin/app/services/settings/space/spacecombinedequipment.service.js on lines 2..30
myems-admin/app/services/settings/space/spacecommand.service.js on lines 2..30
myems-admin/app/services/settings/space/spaceenergyflowdiagram.service.js on lines 2..30
myems-admin/app/services/settings/space/spaceenergystoragepowerstation.service.js on lines 2..30
myems-admin/app/services/settings/space/spaceequipment.service.js on lines 2..30
myems-admin/app/services/settings/space/spacepoint.service.js on lines 2..30
myems-admin/app/services/settings/space/spaceshopfloor.service.js on lines 2..30
myems-admin/app/services/settings/space/spacestore.service.js on lines 2..30
myems-admin/app/services/settings/space/spacetenant.service.js on lines 2..30
myems-admin/app/services/settings/store/storecommand.service.js on lines 2..30
myems-admin/app/services/settings/store/storepoint.service.js on lines 2..30
myems-admin/app/services/settings/store/storesensor.service.js on lines 2..30
myems-admin/app/services/settings/tenant/tenantcommand.service.js on lines 2..30
myems-admin/app/services/settings/tenant/tenantpoint.service.js on lines 2..30
myems-admin/app/services/settings/tenant/tenantsensor.service.js on lines 2..30
myems-admin/app/services/settings/virtualpowerplant/virtualpowerplantmicrogrid.service.js on lines 2..30

Duplicated Code

Duplicated code can lead to software that is hard to understand and difficult to change. The Don't Repeat Yourself (DRY) principle states:

Every piece of knowledge must have a single, unambiguous, authoritative representation within a system.

When you violate DRY, bugs and maintenance problems are sure to follow. Duplicated code has a tendency to both continue to replicate and also to diverge (leaving bugs as two similar implementations differ in subtle ways).

Tuning

This issue has a mass of 284.

We set useful threshold defaults for the languages we support but you may want to adjust these settings based on your project guidelines.

The threshold configuration represents the minimum mass a code block must have to be analyzed for duplication. The lower the threshold, the more fine-grained the comparison.

If the engine is too easily reporting duplication, try raising the threshold. If you suspect that the engine isn't catching enough duplication, try lowering the threshold. The best setting tends to differ from language to language.

See codeclimate-duplication's documentation for more information about tuning the mass threshold in your .codeclimate.yml.

Refactorings

Further Reading

Similar blocks of code found in 2 locations. Consider refactoring.
Open

        if 'longitude' in new_values['data'].keys() and new_values['data']['longitude'] is not None:
            if not (isinstance(new_values['data']['longitude'], float) or
                    isinstance(new_values['data']['longitude'], int)) or \
                    new_values['data']['longitude'] < -180.0 or \
                    new_values['data']['longitude'] > 180.0:
Severity: Major
Found in myems-api/core/space.py and 1 other location - About 1 day to fix
myems-api/core/space.py on lines 182..191

Duplicated Code

Duplicated code can lead to software that is hard to understand and difficult to change. The Don't Repeat Yourself (DRY) principle states:

Every piece of knowledge must have a single, unambiguous, authoritative representation within a system.

When you violate DRY, bugs and maintenance problems are sure to follow. Duplicated code has a tendency to both continue to replicate and also to diverge (leaving bugs as two similar implementations differ in subtle ways).

Tuning

This issue has a mass of 174.

We set useful threshold defaults for the languages we support but you may want to adjust these settings based on your project guidelines.

The threshold configuration represents the minimum mass a code block must have to be analyzed for duplication. The lower the threshold, the more fine-grained the comparison.

If the engine is too easily reporting duplication, try raising the threshold. If you suspect that the engine isn't catching enough duplication, try lowering the threshold. The best setting tends to differ from language to language.

See codeclimate-duplication's documentation for more information about tuning the mass threshold in your .codeclimate.yml.

Refactorings

Further Reading

Severity
Category
Status
Source
Language