Sign upLogin

OpenHPS/openhps-rdf

View on GitHub
Star

Showing 207 of 207 total issues

Similar blocks of code found in 2 locations. Consider refactoring.
Open

            return {
                predicates: {
                    [poso.yaw]: [DataFactory.literal(euler.yaw, DataFactory.namedNode(xsd.decimal))],
                    [poso.pitch]: [DataFactory.literal(euler.pitch, DataFactory.namedNode(xsd.decimal))],
                    [poso.roll]: [DataFactory.literal(euler.roll, DataFactory.namedNode(xsd.decimal))],
Severity: Major
Found in src/mapping/Orientation.ts and 1 other location - About 5 hrs to fix
src/mapping/RelativeOrientation.ts on lines 12..19

Duplicated Code

Duplicated code can lead to software that is hard to understand and difficult to change. The Don't Repeat Yourself (DRY) principle states:

Every piece of knowledge must have a single, unambiguous, authoritative representation within a system.

When you violate DRY, bugs and maintenance problems are sure to follow. Duplicated code has a tendency to both continue to replicate and also to diverge (leaving bugs as two similar implementations differ in subtle ways).

Tuning

This issue has a mass of 141.

We set useful threshold defaults for the languages we support but you may want to adjust these settings based on your project guidelines.

The threshold configuration represents the minimum mass a code block must have to be analyzed for duplication. The lower the threshold, the more fine-grained the comparison.

If the engine is too easily reporting duplication, try raising the threshold. If you suspect that the engine isn't catching enough duplication, try lowering the threshold. The best setting tends to differ from language to language.

See codeclimate-duplication's documentation for more information about tuning the mass threshold in your .codeclimate.yml.

Refactorings

Further Reading

Similar blocks of code found in 2 locations. Consider refactoring.
Open

            return {
                predicates: {
                    [poso.yaw]: [DataFactory.literal(euler.yaw, DataFactory.namedNode(xsd.decimal))],
                    [poso.pitch]: [DataFactory.literal(euler.pitch, DataFactory.namedNode(xsd.decimal))],
                    [poso.roll]: [DataFactory.literal(euler.roll, DataFactory.namedNode(xsd.decimal))],
Severity: Major
Found in src/mapping/RelativeOrientation.ts and 1 other location - About 5 hrs to fix
src/mapping/Orientation.ts on lines 12..19

Duplicated Code

Duplicated code can lead to software that is hard to understand and difficult to change. The Don't Repeat Yourself (DRY) principle states:

Every piece of knowledge must have a single, unambiguous, authoritative representation within a system.

When you violate DRY, bugs and maintenance problems are sure to follow. Duplicated code has a tendency to both continue to replicate and also to diverge (leaving bugs as two similar implementations differ in subtle ways).

Tuning

This issue has a mass of 141.

We set useful threshold defaults for the languages we support but you may want to adjust these settings based on your project guidelines.

The threshold configuration represents the minimum mass a code block must have to be analyzed for duplication. The lower the threshold, the more fine-grained the comparison.

If the engine is too easily reporting duplication, try raising the threshold. If you suspect that the engine isn't catching enough duplication, try lowering the threshold. The best setting tends to differ from language to language.

See codeclimate-duplication's documentation for more information about tuning the mass threshold in your .codeclimate.yml.

Refactorings

Further Reading

Function deserializeObject has 132 lines of code (exceeds 25 allowed). Consider refactoring.
Open

    deserializeObject<T>(
        sourceObject: Thing,
        typeDescriptor: TypeDescriptor,
        knownTypes: Map<string, Serializable<any>>,
        _: string,
Severity: Major
Found in src/rdf/InternalRDFDeserializer.ts - About 5 hrs to fix

    Similar blocks of code found in 3 locations. Consider refactoring.
    Open

    SerializableMember({
    rdf: {
        predicate: [schema.elevation],
        serializer: (value: number) => {
            return DataFactory.literal(value, DataFactory.namedNode(xsd.double));
    Severity: Major
    Found in src/mapping/GeographicalPosition.ts and 2 other locations - About 5 hrs to fix
    src/mapping/GeographicalPosition.ts on lines 42..55
    src/mapping/GeographicalPosition.ts on lines 56..69

    Duplicated Code

    Duplicated code can lead to software that is hard to understand and difficult to change. The Don't Repeat Yourself (DRY) principle states:

    Every piece of knowledge must have a single, unambiguous, authoritative representation within a system.

    When you violate DRY, bugs and maintenance problems are sure to follow. Duplicated code has a tendency to both continue to replicate and also to diverge (leaving bugs as two similar implementations differ in subtle ways).

    Tuning

    This issue has a mass of 138.

    We set useful threshold defaults for the languages we support but you may want to adjust these settings based on your project guidelines.

    The threshold configuration represents the minimum mass a code block must have to be analyzed for duplication. The lower the threshold, the more fine-grained the comparison.

    If the engine is too easily reporting duplication, try raising the threshold. If you suspect that the engine isn't catching enough duplication, try lowering the threshold. The best setting tends to differ from language to language.

    See codeclimate-duplication's documentation for more information about tuning the mass threshold in your .codeclimate.yml.

    Refactorings

    Further Reading

    Similar blocks of code found in 3 locations. Consider refactoring.
    Open

    SerializableMember({
    rdf: {
        predicate: [schema.longitude],
        serializer: (value: number) => {
            return DataFactory.literal(value, DataFactory.namedNode(xsd.double));
    Severity: Major
    Found in src/mapping/GeographicalPosition.ts and 2 other locations - About 5 hrs to fix
    src/mapping/GeographicalPosition.ts on lines 42..55
    src/mapping/GeographicalPosition.ts on lines 70..83

    Duplicated Code

    Duplicated code can lead to software that is hard to understand and difficult to change. The Don't Repeat Yourself (DRY) principle states:

    Every piece of knowledge must have a single, unambiguous, authoritative representation within a system.

    When you violate DRY, bugs and maintenance problems are sure to follow. Duplicated code has a tendency to both continue to replicate and also to diverge (leaving bugs as two similar implementations differ in subtle ways).

    Tuning

    This issue has a mass of 138.

    We set useful threshold defaults for the languages we support but you may want to adjust these settings based on your project guidelines.

    The threshold configuration represents the minimum mass a code block must have to be analyzed for duplication. The lower the threshold, the more fine-grained the comparison.

    If the engine is too easily reporting duplication, try raising the threshold. If you suspect that the engine isn't catching enough duplication, try lowering the threshold. The best setting tends to differ from language to language.

    See codeclimate-duplication's documentation for more information about tuning the mass threshold in your .codeclimate.yml.

    Refactorings

    Further Reading

    Similar blocks of code found in 3 locations. Consider refactoring.
    Open

    SerializableMember({
    rdf: {
        predicate: [schema.latitude],
        serializer: (value: number) => {
            return DataFactory.literal(value, DataFactory.namedNode(xsd.double));
    Severity: Major
    Found in src/mapping/GeographicalPosition.ts and 2 other locations - About 5 hrs to fix
    src/mapping/GeographicalPosition.ts on lines 56..69
    src/mapping/GeographicalPosition.ts on lines 70..83

    Duplicated Code

    Duplicated code can lead to software that is hard to understand and difficult to change. The Don't Repeat Yourself (DRY) principle states:

    Every piece of knowledge must have a single, unambiguous, authoritative representation within a system.

    When you violate DRY, bugs and maintenance problems are sure to follow. Duplicated code has a tendency to both continue to replicate and also to diverge (leaving bugs as two similar implementations differ in subtle ways).

    Tuning

    This issue has a mass of 138.

    We set useful threshold defaults for the languages we support but you may want to adjust these settings based on your project guidelines.

    The threshold configuration represents the minimum mass a code block must have to be analyzed for duplication. The lower the threshold, the more fine-grained the comparison.

    If the engine is too easily reporting duplication, try raising the threshold. If you suspect that the engine isn't catching enough duplication, try lowering the threshold. The best setting tends to differ from language to language.

    See codeclimate-duplication's documentation for more information about tuning the mass threshold in your .codeclimate.yml.

    Refactorings

    Further Reading

    Similar blocks of code found in 2 locations. Consider refactoring.
    Open

    const urn_comunica_default_Runner = (https___linkedsoftwaredependencies_org_bundles_npm__comunica_bus_init__2_0_0_components_ActorInit_jsonld_ActorInit_default_bus, [
  urn_comunica_default_context_preprocess_actors_source_to_destination,
  urn_comunica_default_hash_bindings_actors_sha1,
  urn_comunica_default_init_actors_query,
  urn_comunica_default_optimize_query_operation_actors_join_bgp,
    Severity: Major
    Found in src/service/engine-default.js and 1 other location - About 4 hrs to fix
    src/service/engine-minimal.js on lines 942..1060

    Duplicated Code

    Duplicated code can lead to software that is hard to understand and difficult to change. The Don't Repeat Yourself (DRY) principle states:

    Every piece of knowledge must have a single, unambiguous, authoritative representation within a system.

    When you violate DRY, bugs and maintenance problems are sure to follow. Duplicated code has a tendency to both continue to replicate and also to diverge (leaving bugs as two similar implementations differ in subtle ways).

    Tuning

    This issue has a mass of 128.

    We set useful threshold defaults for the languages we support but you may want to adjust these settings based on your project guidelines.

    The threshold configuration represents the minimum mass a code block must have to be analyzed for duplication. The lower the threshold, the more fine-grained the comparison.

    If the engine is too easily reporting duplication, try raising the threshold. If you suspect that the engine isn't catching enough duplication, try lowering the threshold. The best setting tends to differ from language to language.

    See codeclimate-duplication's documentation for more information about tuning the mass threshold in your .codeclimate.yml.

    Refactorings

    Further Reading

    Similar blocks of code found in 2 locations. Consider refactoring.
    Open

    const urn_comunica_default_Runner = (https___linkedsoftwaredependencies_org_bundles_npm__comunica_bus_init__2_0_0_components_ActorInit_jsonld_ActorInit_default_bus, [
  urn_comunica_default_context_preprocess_actors_source_to_destination,
  urn_comunica_default_hash_bindings_actors_sha1,
  urn_comunica_default_init_actors_query,
  urn_comunica_default_optimize_query_operation_actors_join_bgp,
    Severity: Major
    Found in src/service/engine-minimal.js and 1 other location - About 4 hrs to fix
    src/service/engine-default.js on lines 942..1060

    Duplicated Code

    Duplicated code can lead to software that is hard to understand and difficult to change. The Don't Repeat Yourself (DRY) principle states:

    Every piece of knowledge must have a single, unambiguous, authoritative representation within a system.

    When you violate DRY, bugs and maintenance problems are sure to follow. Duplicated code has a tendency to both continue to replicate and also to diverge (leaving bugs as two similar implementations differ in subtle ways).

    Tuning

    This issue has a mass of 128.

    We set useful threshold defaults for the languages we support but you may want to adjust these settings based on your project guidelines.

    The threshold configuration represents the minimum mass a code block must have to be analyzed for duplication. The lower the threshold, the more fine-grained the comparison.

    If the engine is too easily reporting duplication, try raising the threshold. If you suspect that the engine isn't catching enough duplication, try lowering the threshold. The best setting tends to differ from language to language.

    See codeclimate-duplication's documentation for more information about tuning the mass threshold in your .codeclimate.yml.

    Refactorings

    Further Reading

    Identical blocks of code found in 2 locations. Consider refactoring.
    Open

                if (thing.predicates[qudt.Unit]) {
                if (thing.predicates[qudt.Unit][0].value === qudt_unit.DEG) {
                    unit = AngleUnit.DEGREE;
                } else if (thing.predicates[qudt.Unit][0].value === qudt_unit.RAD) {
                    unit = AngleUnit.RADIAN;
    Severity: Major
    Found in src/mapping/RelativeOrientation.ts and 1 other location - About 4 hrs to fix
    src/mapping/Orientation.ts on lines 36..44

    Duplicated Code

    Duplicated code can lead to software that is hard to understand and difficult to change. The Don't Repeat Yourself (DRY) principle states:

    Every piece of knowledge must have a single, unambiguous, authoritative representation within a system.

    When you violate DRY, bugs and maintenance problems are sure to follow. Duplicated code has a tendency to both continue to replicate and also to diverge (leaving bugs as two similar implementations differ in subtle ways).

    Tuning

    This issue has a mass of 127.

    We set useful threshold defaults for the languages we support but you may want to adjust these settings based on your project guidelines.

    The threshold configuration represents the minimum mass a code block must have to be analyzed for duplication. The lower the threshold, the more fine-grained the comparison.

    If the engine is too easily reporting duplication, try raising the threshold. If you suspect that the engine isn't catching enough duplication, try lowering the threshold. The best setting tends to differ from language to language.

    See codeclimate-duplication's documentation for more information about tuning the mass threshold in your .codeclimate.yml.

    Refactorings

    Further Reading

    Identical blocks of code found in 2 locations. Consider refactoring.
    Open

                if (thing.predicates[qudt.Unit]) {
                if (thing.predicates[qudt.Unit][0].value === qudt_unit.DEG) {
                    unit = AngleUnit.DEGREE;
                } else if (thing.predicates[qudt.Unit][0].value === qudt_unit.RAD) {
                    unit = AngleUnit.RADIAN;
    Severity: Major
    Found in src/mapping/Orientation.ts and 1 other location - About 4 hrs to fix
    src/mapping/RelativeOrientation.ts on lines 36..44

    Duplicated Code

    Duplicated code can lead to software that is hard to understand and difficult to change. The Don't Repeat Yourself (DRY) principle states:

    Every piece of knowledge must have a single, unambiguous, authoritative representation within a system.

    When you violate DRY, bugs and maintenance problems are sure to follow. Duplicated code has a tendency to both continue to replicate and also to diverge (leaving bugs as two similar implementations differ in subtle ways).

    Tuning

    This issue has a mass of 127.

    We set useful threshold defaults for the languages we support but you may want to adjust these settings based on your project guidelines.

    The threshold configuration represents the minimum mass a code block must have to be analyzed for duplication. The lower the threshold, the more fine-grained the comparison.

    If the engine is too easily reporting duplication, try raising the threshold. If you suspect that the engine isn't catching enough duplication, try lowering the threshold. The best setting tends to differ from language to language.

    See codeclimate-duplication's documentation for more information about tuning the mass threshold in your .codeclimate.yml.

    Refactorings

    Further Reading

    Similar blocks of code found in 2 locations. Consider refactoring.
    Open

    RDFSerializer.registerRDFType(BLEUUID, {
    serializer: (value: BLEUUID) => {
        if (!value) {
            return undefined;
        }
    Severity: Major
    Found in src/mapping/rf/BLEUUID.ts and 1 other location - About 4 hrs to fix
    src/mapping/UUID.ts on lines 6..19

    Duplicated Code

    Duplicated code can lead to software that is hard to understand and difficult to change. The Don't Repeat Yourself (DRY) principle states:

    Every piece of knowledge must have a single, unambiguous, authoritative representation within a system.

    When you violate DRY, bugs and maintenance problems are sure to follow. Duplicated code has a tendency to both continue to replicate and also to diverge (leaving bugs as two similar implementations differ in subtle ways).

    Tuning

    This issue has a mass of 126.

    We set useful threshold defaults for the languages we support but you may want to adjust these settings based on your project guidelines.

    The threshold configuration represents the minimum mass a code block must have to be analyzed for duplication. The lower the threshold, the more fine-grained the comparison.

    If the engine is too easily reporting duplication, try raising the threshold. If you suspect that the engine isn't catching enough duplication, try lowering the threshold. The best setting tends to differ from language to language.

    See codeclimate-duplication's documentation for more information about tuning the mass threshold in your .codeclimate.yml.

    Refactorings

    Further Reading

    Similar blocks of code found in 2 locations. Consider refactoring.
    Open

    RDFSerializer.registerRDFType(UUID, {
    serializer: (value: UUID) => {
        if (!value) {
            return undefined;
        }
    Severity: Major
    Found in src/mapping/UUID.ts and 1 other location - About 4 hrs to fix
    src/mapping/rf/BLEUUID.ts on lines 6..19

    Duplicated Code

    Duplicated code can lead to software that is hard to understand and difficult to change. The Don't Repeat Yourself (DRY) principle states:

    Every piece of knowledge must have a single, unambiguous, authoritative representation within a system.

    When you violate DRY, bugs and maintenance problems are sure to follow. Duplicated code has a tendency to both continue to replicate and also to diverge (leaving bugs as two similar implementations differ in subtle ways).

    Tuning

    This issue has a mass of 126.

    We set useful threshold defaults for the languages we support but you may want to adjust these settings based on your project guidelines.

    The threshold configuration represents the minimum mass a code block must have to be analyzed for duplication. The lower the threshold, the more fine-grained the comparison.

    If the engine is too easily reporting duplication, try raising the threshold. If you suspect that the engine isn't catching enough duplication, try lowering the threshold. The best setting tends to differ from language to language.

    See codeclimate-duplication's documentation for more information about tuning the mass threshold in your .codeclimate.yml.

    Refactorings

    Further Reading

    Similar blocks of code found in 2 locations. Consider refactoring.
    Open

    SerializableMember({
    rdf: {
        predicate: hardware.macAddress,
        datatype: xsd.string,
        serializer: (object: MACAddress) => {
    Severity: Major
    Found in src/mapping/rf/BLEObject.ts and 1 other location - About 4 hrs to fix
    src/mapping/rf/BLEObject.ts on lines 72..90

    Duplicated Code

    Duplicated code can lead to software that is hard to understand and difficult to change. The Don't Repeat Yourself (DRY) principle states:

    Every piece of knowledge must have a single, unambiguous, authoritative representation within a system.

    When you violate DRY, bugs and maintenance problems are sure to follow. Duplicated code has a tendency to both continue to replicate and also to diverge (leaving bugs as two similar implementations differ in subtle ways).

    Tuning

    This issue has a mass of 122.

    We set useful threshold defaults for the languages we support but you may want to adjust these settings based on your project guidelines.

    The threshold configuration represents the minimum mass a code block must have to be analyzed for duplication. The lower the threshold, the more fine-grained the comparison.

    If the engine is too easily reporting duplication, try raising the threshold. If you suspect that the engine isn't catching enough duplication, try lowering the threshold. The best setting tends to differ from language to language.

    See codeclimate-duplication's documentation for more information about tuning the mass threshold in your .codeclimate.yml.

    Refactorings

    Further Reading

    Similar blocks of code found in 2 locations. Consider refactoring.
    Open

    SerializableArrayMember(MACAddress, {
    rdf: {
        predicate: hardware.macAddress,
        datatype: xsd.string,
        serializer: (object: MACAddress) => {
    Severity: Major
    Found in src/mapping/rf/BLEObject.ts and 1 other location - About 4 hrs to fix
    src/mapping/rf/BLEObject.ts on lines 53..71

    Duplicated Code

    Duplicated code can lead to software that is hard to understand and difficult to change. The Don't Repeat Yourself (DRY) principle states:

    Every piece of knowledge must have a single, unambiguous, authoritative representation within a system.

    When you violate DRY, bugs and maintenance problems are sure to follow. Duplicated code has a tendency to both continue to replicate and also to diverge (leaving bugs as two similar implementations differ in subtle ways).

    Tuning

    This issue has a mass of 122.

    We set useful threshold defaults for the languages we support but you may want to adjust these settings based on your project guidelines.

    The threshold configuration represents the minimum mass a code block must have to be analyzed for duplication. The lower the threshold, the more fine-grained the comparison.

    If the engine is too easily reporting duplication, try raising the threshold. If you suspect that the engine isn't catching enough duplication, try lowering the threshold. The best setting tends to differ from language to language.

    See codeclimate-duplication's documentation for more information about tuning the mass threshold in your .codeclimate.yml.

    Refactorings

    Further Reading

    Function serializeObject has 106 lines of code (exceeds 25 allowed). Consider refactoring.
    Open

        serializeObject<T, TD extends TypeDescriptor>(
        sourceObject: T,
        typeDescriptor: TD,
        _: string,
        serializer: Serializer,
    Severity: Major
    Found in src/rdf/InternalRDFSerializer.ts - About 4 hrs to fix

      Identical blocks of code found in 2 locations. Consider refactoring.
      Open

      const urn_comunica_default_query_parse_actors_sparql = new (require('@comunica/actor-query-parse-sparql').ActorQueryParseSparql)({
  'prefixes': {"dbpedia":"http://dbpedia.org/resource/","dbpedia-owl":"http://dbpedia.org/ontology/","dbpprop":"http://dbpedia.org/property/","dc":"http://purl.org/dc/terms/","dc11":"http://purl.org/dc/elements/1.1/","dcterms":"http://purl.org/dc/terms/","foaf":"http://xmlns.com/foaf/0.1/","geo":"http://www.w3.org/2003/01/geo/wgs84_pos#","owl":"http://www.w3.org/2002/07/owl#","rdf":"http://www.w3.org/1999/02/22-rdf-syntax-ns#","rdfs":"http://www.w3.org/2000/01/rdf-schema#","schema":"http://schema.org/","skos":"http://www.w3.org/2008/05/skos#","xsd":"http://www.w3.org/2001/XMLSchema#"},
  'name': 'urn:comunica:default:query-parse/actors#sparql',
  'bus': https___linkedsoftwaredependencies_org_bundles_npm__comunica_bus_query_parse__2_0_0_components_ActorQueryParse_jsonld_ActorQueryParse_default_bus
});
      Severity: Major
      Found in src/service/engine-default.js and 1 other location - About 3 hrs to fix
      src/service/engine-minimal.js on lines 130..134

      Duplicated Code

      Duplicated code can lead to software that is hard to understand and difficult to change. The Don't Repeat Yourself (DRY) principle states:

      Every piece of knowledge must have a single, unambiguous, authoritative representation within a system.

      When you violate DRY, bugs and maintenance problems are sure to follow. Duplicated code has a tendency to both continue to replicate and also to diverge (leaving bugs as two similar implementations differ in subtle ways).

      Tuning

      This issue has a mass of 106.

      We set useful threshold defaults for the languages we support but you may want to adjust these settings based on your project guidelines.

      The threshold configuration represents the minimum mass a code block must have to be analyzed for duplication. The lower the threshold, the more fine-grained the comparison.

      If the engine is too easily reporting duplication, try raising the threshold. If you suspect that the engine isn't catching enough duplication, try lowering the threshold. The best setting tends to differ from language to language.

      See codeclimate-duplication's documentation for more information about tuning the mass threshold in your .codeclimate.yml.

      Refactorings

      Further Reading

      Identical blocks of code found in 2 locations. Consider refactoring.
      Open

      const urn_comunica_default_query_parse_actors_sparql = new (require('@comunica/actor-query-parse-sparql').ActorQueryParseSparql)({
  'prefixes': {"dbpedia":"http://dbpedia.org/resource/","dbpedia-owl":"http://dbpedia.org/ontology/","dbpprop":"http://dbpedia.org/property/","dc":"http://purl.org/dc/terms/","dc11":"http://purl.org/dc/elements/1.1/","dcterms":"http://purl.org/dc/terms/","foaf":"http://xmlns.com/foaf/0.1/","geo":"http://www.w3.org/2003/01/geo/wgs84_pos#","owl":"http://www.w3.org/2002/07/owl#","rdf":"http://www.w3.org/1999/02/22-rdf-syntax-ns#","rdfs":"http://www.w3.org/2000/01/rdf-schema#","schema":"http://schema.org/","skos":"http://www.w3.org/2008/05/skos#","xsd":"http://www.w3.org/2001/XMLSchema#"},
  'name': 'urn:comunica:default:query-parse/actors#sparql',
  'bus': https___linkedsoftwaredependencies_org_bundles_npm__comunica_bus_query_parse__2_0_0_components_ActorQueryParse_jsonld_ActorQueryParse_default_bus
});
      Severity: Major
      Found in src/service/engine-minimal.js and 1 other location - About 3 hrs to fix
      src/service/engine-default.js on lines 130..134

      Duplicated Code

      Duplicated code can lead to software that is hard to understand and difficult to change. The Don't Repeat Yourself (DRY) principle states:

      Every piece of knowledge must have a single, unambiguous, authoritative representation within a system.

      When you violate DRY, bugs and maintenance problems are sure to follow. Duplicated code has a tendency to both continue to replicate and also to diverge (leaving bugs as two similar implementations differ in subtle ways).

      Tuning

      This issue has a mass of 106.

      We set useful threshold defaults for the languages we support but you may want to adjust these settings based on your project guidelines.

      The threshold configuration represents the minimum mass a code block must have to be analyzed for duplication. The lower the threshold, the more fine-grained the comparison.

      If the engine is too easily reporting duplication, try raising the threshold. If you suspect that the engine isn't catching enough duplication, try lowering the threshold. The best setting tends to differ from language to language.

      See codeclimate-duplication's documentation for more information about tuning the mass threshold in your .codeclimate.yml.

      Refactorings

      Further Reading

      Similar blocks of code found in 3 locations. Consider refactoring.
      Open

      SerializableMember({
    rdf: {
        identifier: true,
        serializer: (uid: string) => uid,
        deserializer: (thing: Thing) =>
      Severity: Major
      Found in src/mapping/DataObject.ts and 2 other locations - About 3 hrs to fix
      src/mapping/DataFrame.ts on lines 18..25
      src/mapping/Node.ts on lines 43..50

      Duplicated Code

      Duplicated code can lead to software that is hard to understand and difficult to change. The Don't Repeat Yourself (DRY) principle states:

      Every piece of knowledge must have a single, unambiguous, authoritative representation within a system.

      When you violate DRY, bugs and maintenance problems are sure to follow. Duplicated code has a tendency to both continue to replicate and also to diverge (leaving bugs as two similar implementations differ in subtle ways).

      Tuning

      This issue has a mass of 105.

      We set useful threshold defaults for the languages we support but you may want to adjust these settings based on your project guidelines.

      The threshold configuration represents the minimum mass a code block must have to be analyzed for duplication. The lower the threshold, the more fine-grained the comparison.

      If the engine is too easily reporting duplication, try raising the threshold. If you suspect that the engine isn't catching enough duplication, try lowering the threshold. The best setting tends to differ from language to language.

      See codeclimate-duplication's documentation for more information about tuning the mass threshold in your .codeclimate.yml.

      Refactorings

      Further Reading

      Similar blocks of code found in 3 locations. Consider refactoring.
      Open

      SerializableMember({
    rdf: {
        identifier: true,
        serializer: (uid: string) => uid,
        deserializer: (thing: Thing) =>
      Severity: Major
      Found in src/mapping/DataFrame.ts and 2 other locations - About 3 hrs to fix
      src/mapping/DataObject.ts on lines 27..34
      src/mapping/Node.ts on lines 43..50

      Duplicated Code

      Duplicated code can lead to software that is hard to understand and difficult to change. The Don't Repeat Yourself (DRY) principle states:

      Every piece of knowledge must have a single, unambiguous, authoritative representation within a system.

      When you violate DRY, bugs and maintenance problems are sure to follow. Duplicated code has a tendency to both continue to replicate and also to diverge (leaving bugs as two similar implementations differ in subtle ways).

      Tuning

      This issue has a mass of 105.

      We set useful threshold defaults for the languages we support but you may want to adjust these settings based on your project guidelines.

      The threshold configuration represents the minimum mass a code block must have to be analyzed for duplication. The lower the threshold, the more fine-grained the comparison.

      If the engine is too easily reporting duplication, try raising the threshold. If you suspect that the engine isn't catching enough duplication, try lowering the threshold. The best setting tends to differ from language to language.

      See codeclimate-duplication's documentation for more information about tuning the mass threshold in your .codeclimate.yml.

      Refactorings

      Further Reading

      Similar blocks of code found in 3 locations. Consider refactoring.
      Open

      SerializableMember({
    rdf: {
        identifier: true,
        serializer: (uid: string) => uid,
        deserializer: (thing: Thing) =>
      Severity: Major
      Found in src/mapping/Node.ts and 2 other locations - About 3 hrs to fix
      src/mapping/DataFrame.ts on lines 18..25
      src/mapping/DataObject.ts on lines 27..34

      Duplicated Code

      Duplicated code can lead to software that is hard to understand and difficult to change. The Don't Repeat Yourself (DRY) principle states:

      Every piece of knowledge must have a single, unambiguous, authoritative representation within a system.

      When you violate DRY, bugs and maintenance problems are sure to follow. Duplicated code has a tendency to both continue to replicate and also to diverge (leaving bugs as two similar implementations differ in subtle ways).

      Tuning

      This issue has a mass of 105.

      We set useful threshold defaults for the languages we support but you may want to adjust these settings based on your project guidelines.

      The threshold configuration represents the minimum mass a code block must have to be analyzed for duplication. The lower the threshold, the more fine-grained the comparison.

      If the engine is too easily reporting duplication, try raising the threshold. If you suspect that the engine isn't catching enough duplication, try lowering the threshold. The best setting tends to differ from language to language.

      See codeclimate-duplication's documentation for more information about tuning the mass threshold in your .codeclimate.yml.

      Refactorings

      Further Reading

      Severity
      Category
      Status
      Source
      Language