Showing 464 of 464 total issues
Line too long (103 > 79 characters) Open
"""Calculate 'success probability', 'TTS', 'Residual energy','Standard Error' with computation time
- Read upRead up
- Exclude checks
Limit all lines to a maximum of 79 characters.
There are still many devices around that are limited to 80 character
lines; plus, limiting windows to 80 characters makes it possible to
have several windows side-by-side. The default wrapping on such
devices looks ugly. Therefore, please limit all lines to a maximum
of 79 characters. For flowing long blocks of text (docstrings or
comments), limiting the length to 72 characters is recommended.
Reports error E501.
Line too long (113 > 79 characters) Open
solutions (list(list(int)), list(int)): true solution or list of solution (if solutions are degenerated).
- Read upRead up
- Exclude checks
Limit all lines to a maximum of 79 characters.
There are still many devices around that are limited to 80 character
lines; plus, limiting windows to 80 characters makes it possible to
have several windows side-by-side. The default wrapping on such
devices looks ugly. Therefore, please limit all lines to a maximum
of 79 characters. For flowing long blocks of text (docstrings or
comments), limiting the length to 72 characters is recommended.
Reports error E501.
Trailing spaces Open
With KaTeX
- Read upRead up
- Exclude checks
MD009 - Trailing spaces
Tags: whitespace
Aliases: no-trailing-spaces
Parameters: br_spaces (number; default: 0)
This rule is triggered on any lines that end with whitespace. To fix this, find the line that is triggered and remove any trailing spaces from the end.
The brspaces parameter allows an exception to this rule for a specific amount of trailing spaces used to insert an explicit line break/br element. For example, set brspaces to 2 to allow exactly 2 spaces at the end of a line.
Note: you have to set brspaces to 2 or higher for this exception to take effect - you can't insert a br element with just a single trailing space, so if you set brspaces to 1, the exception will be disabled, just as if it was set to the default of 0.
Trailing spaces Open
# Higher order model
- Read upRead up
- Exclude checks
MD009 - Trailing spaces
Tags: whitespace
Aliases: no-trailing-spaces
Parameters: br_spaces (number; default: 0)
This rule is triggered on any lines that end with whitespace. To fix this, find the line that is triggered and remove any trailing spaces from the end.
The brspaces parameter allows an exception to this rule for a specific amount of trailing spaces used to insert an explicit line break/br element. For example, set brspaces to 2 to allow exactly 2 spaces at the end of a line.
Note: you have to set brspaces to 2 or higher for this exception to take effect - you can't insert a br element with just a single trailing space, so if you set brspaces to 1, the exception will be disabled, just as if it was set to the default of 0.
Trailing spaces Open
# pipx install pre-commit
- Read upRead up
- Exclude checks
MD009 - Trailing spaces
Tags: whitespace
Aliases: no-trailing-spaces
Parameters: br_spaces (number; default: 0)
This rule is triggered on any lines that end with whitespace. To fix this, find the line that is triggered and remove any trailing spaces from the end.
The brspaces parameter allows an exception to this rule for a specific amount of trailing spaces used to insert an explicit line break/br element. For example, set brspaces to 2 to allow exactly 2 spaces at the end of a line.
Note: you have to set brspaces to 2 or higher for this exception to take effect - you can't insert a br element with just a single trailing space, so if you set brspaces to 1, the exception will be disabled, just as if it was set to the default of 0.
Fenced code blocks should be surrounded by blank lines Open
```{math}
- Read upRead up
- Exclude checks
MD031 - Fenced code blocks should be surrounded by blank lines
Tags: code, blank_lines
Aliases: blanks-around-fences
This rule is triggered when fenced code blocks are either not preceded or not followed by a blank line:
Some text
```
Code block
```
```
Another code block
```
Some more text
To fix this, ensure that all fenced code blocks have a blank line both before and after (except where the block is at the beginning or end of the document):
Some text
```
Code block
```
```
Another code block
```
Some more text
Rationale: Aside from aesthetic reasons, some parsers, including kramdown, will not parse fenced code blocks that don't have blank lines before and after them.
Trailing spaces Open
$ python setup.py --build-type Debug test
- Read upRead up
- Exclude checks
MD009 - Trailing spaces
Tags: whitespace
Aliases: no-trailing-spaces
Parameters: br_spaces (number; default: 0)
This rule is triggered on any lines that end with whitespace. To fix this, find the line that is triggered and remove any trailing spaces from the end.
The brspaces parameter allows an exception to this rule for a specific amount of trailing spaces used to insert an explicit line break/br element. For example, set brspaces to 2 to allow exactly 2 spaces at the end of a line.
Note: you have to set brspaces to 2 or higher for this exception to take effect - you can't insert a br element with just a single trailing space, so if you set brspaces to 1, the exception will be disabled, just as if it was set to the default of 0.
Multiple consecutive blank lines Open
- Read upRead up
- Exclude checks
MD012 - Multiple consecutive blank lines
Tags: whitespace, blank_lines
Aliases: no-multiple-blanks
This rule is triggered when there are multiple consecutive blank lines in the document:
Some text here
Some more text here
To fix this, delete the offending lines:
Some text here
Some more text here
Note: this rule will not be triggered if there are multiple consecutive blank lines inside code blocks.
Trailing punctuation in header Open
# OpenJij : Framework for the Ising model and QUBO.
- Read upRead up
- Exclude checks
MD026 - Trailing punctuation in header
Tags: headers
Aliases: no-trailing-punctuation
Parameters: punctuation (string; default ".,;:!?")
This rule is triggered on any header that has a punctuation character as the last character in the line:
# This is a header.
To fix this, remove any trailing punctuation:
# This is a header
Note: The punctuation parameter can be used to specify what characters class
as punctuation at the end of the header. For example, you can set it to
'.,;:!'
to allow headers with question marks in them, such as might be used
in an FAQ.
Multiple top level headers in the same document Open
# Parameters customize
- Read upRead up
- Exclude checks
MD025 - Multiple top level headers in the same document
Tags: headers
Aliases: single-h1
Parameters: level (number; default 1)
This rule is triggered when a top level header is in use (the first line of the file is a h1 header), and more than one h1 header is in use in the document:
# Top level header
# Another top level header
To fix, structure your document so that there is a single h1 header that is the title for the document, and all later headers are h2 or lower level headers:
# Title
## Header
## Another header
Rationale: A top level header is a h1 on the first line of the file, and serves as the title for the document. If this convention is in use, then there can not be more than one title for the document, and the entire document should be contained within this header.
Note: The level
parameter can be used to change the top level (ex: to h2) in
cases where an h1 is added externally.
Trailing punctuation in header Open
# Welcome to OpenJij's documentation!
- Read upRead up
- Exclude checks
MD026 - Trailing punctuation in header
Tags: headers
Aliases: no-trailing-punctuation
Parameters: punctuation (string; default ".,;:!?")
This rule is triggered on any header that has a punctuation character as the last character in the line:
# This is a header.
To fix this, remove any trailing punctuation:
# This is a header
Note: The punctuation parameter can be used to specify what characters class
as punctuation at the end of the header. For example, you can set it to
'.,;:!'
to allow headers with question marks in them, such as might be used
in an FAQ.
Multiple consecutive blank lines Open
- Read upRead up
- Exclude checks
MD012 - Multiple consecutive blank lines
Tags: whitespace, blank_lines
Aliases: no-multiple-blanks
This rule is triggered when there are multiple consecutive blank lines in the document:
Some text here
Some more text here
To fix this, delete the offending lines:
Some text here
Some more text here
Note: this rule will not be triggered if there are multiple consecutive blank lines inside code blocks.
Dollar signs used before commands without showing output Open
```
- Read upRead up
- Exclude checks
MD014 - Dollar signs used before commands without showing output
Tags: code
Aliases: commands-show-output
This rule is triggered when there are code blocks showing shell commands to be typed, and the shell commands are preceded by dollar signs ($):
$ ls
$ cat foo
$ less bar
The dollar signs are unnecessary in the above situation, and should not be included:
ls
cat foo
less bar
However, an exception is made when there is a need to distinguish between typed commands and command output, as in the following example:
$ ls
foo bar
$ cat foo
Hello world
$ cat bar
baz
Rationale: it is easier to copy and paste and less noisy if the dollar signs are omitted when they are not needed. See http://www.cirosantilli.com/markdown-styleguide/#dollar-signs-in-shell-code for more information.
Line length Open
$$\begin{array}{cccc}\text{Problem:} & \text{Knapsack} & & \\& & \max \quad \displaystyle \sum_{i = 0}^{N - 1} v_{i} \cdot x_{i} & \\\text{{s.t.}} & & & \\ & \text{capacity} & \displaystyle \sum_{i = 0}^{N - 1} w_{i} \cdot x_{i} \leq W & \\\text{{where}} & & & \\& x & 1\text{-dim binary variable}\\\end{array}$$
- Read upRead up
- Exclude checks
MD013 - Line length
Tags: line_length
Aliases: line-length Parameters: linelength, codeblocks, tables (number; default 80, boolean; default true)
This rule is triggered when there are lines that are longer than the configured line length (default: 80 characters). To fix this, split the line up into multiple lines.
This rule has an exception where there is no whitespace beyond the configured line length. This allows you to still include items such as long URLs without being forced to break them in the middle.
You also have the option to exclude this rule for code blocks and tables. To
do this, set the code_blocks
and/or tables
parameters to false.
Code blocks are included in this rule by default since it is often a requirement for document readability, and tentatively compatible with code rules. Still, some languages do not lend themselves to short lines.
Inline HTML Open
# OpenJij : Framework for the Ising model and QUBO.
- Read upRead up
- Exclude checks
MD033 - Inline HTML
Tags: html
Aliases: no-inline-html
This rule is triggered whenever raw HTML is used in a markdown document:
Inline HTML header
To fix this, use 'pure' markdown instead of including raw HTML:
# Markdown header
Rationale: Raw HTML is allowed in markdown, but this rule is included for those who want their documents to only include "pure" markdown, or for those who are rendering markdown documents in something other than HTML.
Dollar signs used before commands without showing output Open
```python
- Read upRead up
- Exclude checks
MD014 - Dollar signs used before commands without showing output
Tags: code
Aliases: commands-show-output
This rule is triggered when there are code blocks showing shell commands to be typed, and the shell commands are preceded by dollar signs ($):
$ ls
$ cat foo
$ less bar
The dollar signs are unnecessary in the above situation, and should not be included:
ls
cat foo
less bar
However, an exception is made when there is a need to distinguish between typed commands and command output, as in the following example:
$ ls
foo bar
$ cat foo
Hello world
$ cat bar
baz
Rationale: it is easier to copy and paste and less noisy if the dollar signs are omitted when they are not needed. See http://www.cirosantilli.com/markdown-styleguide/#dollar-signs-in-shell-code for more information.
Line length Open
H = \sum_{i}h_i\sigma_i + \sum_{i < j} J_{ij} \sigma_i \sigma_j + \sum_{i, j, k} K_{i,j,k} \sigma_i\sigma_j \sigma_k \cdots \\
- Read upRead up
- Exclude checks
MD013 - Line length
Tags: line_length
Aliases: line-length Parameters: linelength, codeblocks, tables (number; default 80, boolean; default true)
This rule is triggered when there are lines that are longer than the configured line length (default: 80 characters). To fix this, split the line up into multiple lines.
This rule has an exception where there is no whitespace beyond the configured line length. This allows you to still include items such as long URLs without being forced to break them in the middle.
You also have the option to exclude this rule for code blocks and tables. To
do this, set the code_blocks
and/or tables
parameters to false.
Code blocks are included in this rule by default since it is often a requirement for document readability, and tentatively compatible with code rules. Still, some languages do not lend themselves to short lines.
Bare URL used Open
https://www.contributor-covenant.org/faq. Translations are available at
- Read upRead up
- Exclude checks
MD034 - Bare URL used
Tags: links, url
Aliases: no-bare-urls
This rule is triggered whenever a URL is given that isn't surrounded by angle brackets:
For more information, see http://www.example.com/.
To fix this, add angle brackets around the URL:
For more information, see <http:></http:>.
Rationale: Without angle brackets, the URL isn't converted into a link in many markdown parsers.
Note: if you do want a bare URL without it being converted into a link, enclose it in a code block, otherwise in some markdown parsers it will be converted:
`http://www.example.com`
Trailing spaces Open
$ python -m black
- Read upRead up
- Exclude checks
MD009 - Trailing spaces
Tags: whitespace
Aliases: no-trailing-spaces
Parameters: br_spaces (number; default: 0)
This rule is triggered on any lines that end with whitespace. To fix this, find the line that is triggered and remove any trailing spaces from the end.
The brspaces parameter allows an exception to this rule for a specific amount of trailing spaces used to insert an explicit line break/br element. For example, set brspaces to 2 to allow exactly 2 spaces at the end of a line.
Note: you have to set brspaces to 2 or higher for this exception to take effect - you can't insert a br element with just a single trailing space, so if you set brspaces to 1, the exception will be disabled, just as if it was set to the default of 0.
Multiple top level headers in the same document Open
# Minimum sample code
- Read upRead up
- Exclude checks
MD025 - Multiple top level headers in the same document
Tags: headers
Aliases: single-h1
Parameters: level (number; default 1)
This rule is triggered when a top level header is in use (the first line of the file is a h1 header), and more than one h1 header is in use in the document:
# Top level header
# Another top level header
To fix, structure your document so that there is a single h1 header that is the title for the document, and all later headers are h2 or lower level headers:
# Title
## Header
## Another header
Rationale: A top level header is a h1 on the first line of the file, and serves as the title for the document. If this convention is in use, then there can not be more than one title for the document, and the entire document should be contained within this header.
Note: The level
parameter can be used to change the top level (ex: to h2) in
cases where an h1 is added externally.