Showing 775 of 775 total issues
The class Controller has an overall complexity of 50 which is very high. The configured complexity threshold is 50. Open
class Controller
{
/**
* version
*
- Exclude checks
The class BucketStub has 23 public methods. Consider refactoring BucketStub to keep number of public methods under 10. Open
class BucketStub extends Bucket
{
public $_objects;
private $_name;
private $_info;
- Read upRead up
- Exclude checks
TooManyPublicMethods
Since: 0.1
A class with too many public methods is probably a good suspect for refactoring, in order to reduce its complexity and find a way to have more fine grained objects.
By default it ignores methods starting with 'get' or 'set'.
Example
Source https://phpmd.org/rules/codesize.html#toomanypublicmethods
The class ControllerTest has 39 non-getter- and setter-methods. Consider refactoring ControllerTest to keep number of methods under 25. Open
class ControllerTest extends TestCase
{
protected $_data;
protected $_path;
- Read upRead up
- Exclude checks
TooManyMethods
Since: 0.1
A class with too many methods is probably a good suspect for refactoring, in order to reduce its complexity and find a way to have more fine grained objects.
By default it ignores methods starting with 'get' or 'set'.
The default was changed from 10 to 25 in PHPMD 2.3.
Example
Source https://phpmd.org/rules/codesize.html#toomanymethods
The class Filesystem has an overall complexity of 74 which is very high. The configured complexity threshold is 50. Open
class Filesystem extends AbstractData
{
/**
* glob() pattern of the two folder levels and the paste files under the
* configured path. Needs to return both files with and without .php suffix,
- Exclude checks
The class ConnectionInterfaceStub has 25 public methods. Consider refactoring ConnectionInterfaceStub to keep number of public methods under 10. Open
class ConnectionInterfaceStub implements ConnectionInterface
{
public function deleteAcl(array $args = array())
{
throw new BadMethodCallException('not supported by this stub');
- Read upRead up
- Exclude checks
TooManyPublicMethods
Since: 0.1
A class with too many public methods is probably a good suspect for refactoring, in order to reduce its complexity and find a way to have more fine grained objects.
By default it ignores methods starting with 'get' or 'set'.
Example
Source https://phpmd.org/rules/codesize.html#toomanypublicmethods
The class ConfigurationTest has 13 public methods. Consider refactoring ConfigurationTest to keep number of public methods under 10. Open
class ConfigurationTest extends TestCase
{
private $_minimalConfig;
private $_options;
- Read upRead up
- Exclude checks
TooManyPublicMethods
Since: 0.1
A class with too many public methods is probably a good suspect for refactoring, in order to reduce its complexity and find a way to have more fine grained objects.
By default it ignores methods starting with 'get' or 'set'.
Example
Source https://phpmd.org/rules/codesize.html#toomanypublicmethods
The class I18nTest has 17 public methods. Consider refactoring I18nTest to keep number of public methods under 10. Open
class I18nTest extends TestCase
{
private $_translations = array();
public function setUp(): void
- Read upRead up
- Exclude checks
TooManyPublicMethods
Since: 0.1
A class with too many public methods is probably a good suspect for refactoring, in order to reduce its complexity and find a way to have more fine grained objects.
By default it ignores methods starting with 'get' or 'set'.
Example
Source https://phpmd.org/rules/codesize.html#toomanypublicmethods
The class ModelTest has 22 public methods. Consider refactoring ModelTest to keep number of public methods under 10. Open
class ModelTest extends TestCase
{
private $_conf;
private $_model;
- Read upRead up
- Exclude checks
TooManyPublicMethods
Since: 0.1
A class with too many public methods is probably a good suspect for refactoring, in order to reduce its complexity and find a way to have more fine grained objects.
By default it ignores methods starting with 'get' or 'set'.
Example
Source https://phpmd.org/rules/codesize.html#toomanypublicmethods
The class ControllerTest has 39 public methods. Consider refactoring ControllerTest to keep number of public methods under 10. Open
class ControllerTest extends TestCase
{
protected $_data;
protected $_path;
- Read upRead up
- Exclude checks
TooManyPublicMethods
Since: 0.1
A class with too many public methods is probably a good suspect for refactoring, in order to reduce its complexity and find a way to have more fine grained objects.
By default it ignores methods starting with 'get' or 'set'.
Example
Source https://phpmd.org/rules/codesize.html#toomanypublicmethods
The class GoogleCloudStorage has an overall complexity of 66 which is very high. The configured complexity threshold is 50. Open
class GoogleCloudStorage extends AbstractData
{
/**
* GCS client
*
- Exclude checks
The class I18n has an overall complexity of 115 which is very high. The configured complexity threshold is 50. Open
class I18n
{
/**
* language
*
- Exclude checks
The class S3Storage has an overall complexity of 69 which is very high. The configured complexity threshold is 50. Open
class S3Storage extends AbstractData
{
/**
* S3 client
*
- Exclude checks
The class Request has an overall complexity of 61 which is very high. The configured complexity threshold is 50. Open
class Request
{
/**
* MIME type for JSON
*
- Exclude checks
Identical blocks of code found in 2 locations. Consider refactoring. Open
public static function setUpBeforeClass(): void
{
$httpClient = new Client(array('debug'=>false));
$handler = HttpHandlerFactory::build($httpClient);
- Read upRead up
Duplicated Code
Duplicated code can lead to software that is hard to understand and difficult to change. The Don't Repeat Yourself (DRY) principle states:
Every piece of knowledge must have a single, unambiguous, authoritative representation within a system.
When you violate DRY, bugs and maintenance problems are sure to follow. Duplicated code has a tendency to both continue to replicate and also to diverge (leaving bugs as two similar implementations differ in subtle ways).
Tuning
This issue has a mass of 142.
We set useful threshold defaults for the languages we support but you may want to adjust these settings based on your project guidelines.
The threshold configuration represents the minimum mass a code block must have to be analyzed for duplication. The lower the threshold, the more fine-grained the comparison.
If the engine is too easily reporting duplication, try raising the threshold. If you suspect that the engine isn't catching enough duplication, try lowering the threshold. The best setting tends to differ from language to language.
See codeclimate-duplication
's documentation for more information about tuning the mass threshold in your .codeclimate.yml
.
Refactorings
- Extract Method
- Extract Class
- Form Template Method
- Introduce Null Object
- Pull Up Method
- Pull Up Field
- Substitute Algorithm
Further Reading
- Don't Repeat Yourself on the C2 Wiki
- Duplicated Code on SourceMaking
- Refactoring: Improving the Design of Existing Code by Martin Fowler. Duplicated Code, p76
Identical blocks of code found in 2 locations. Consider refactoring. Open
public static function setUpBeforeClass(): void
{
$httpClient = new Client(array('debug'=>false));
$handler = HttpHandlerFactory::build($httpClient);
- Read upRead up
Duplicated Code
Duplicated code can lead to software that is hard to understand and difficult to change. The Don't Repeat Yourself (DRY) principle states:
Every piece of knowledge must have a single, unambiguous, authoritative representation within a system.
When you violate DRY, bugs and maintenance problems are sure to follow. Duplicated code has a tendency to both continue to replicate and also to diverge (leaving bugs as two similar implementations differ in subtle ways).
Tuning
This issue has a mass of 142.
We set useful threshold defaults for the languages we support but you may want to adjust these settings based on your project guidelines.
The threshold configuration represents the minimum mass a code block must have to be analyzed for duplication. The lower the threshold, the more fine-grained the comparison.
If the engine is too easily reporting duplication, try raising the threshold. If you suspect that the engine isn't catching enough duplication, try lowering the threshold. The best setting tends to differ from language to language.
See codeclimate-duplication
's documentation for more information about tuning the mass threshold in your .codeclimate.yml
.
Refactorings
- Extract Method
- Extract Class
- Form Template Method
- Introduce Null Object
- Pull Up Method
- Pull Up Field
- Substitute Algorithm
Further Reading
- Don't Repeat Yourself on the C2 Wiki
- Duplicated Code on SourceMaking
- Refactoring: Improving the Design of Existing Code by Martin Fowler. Duplicated Code, p76
Similar blocks of code found in 2 locations. Consider refactoring. Open
public function testBrowserLanguageCsDetection()
{
$_SERVER['HTTP_ACCEPT_LANGUAGE'] = 'cs;q=0.8,en-GB;q=0.6,en-US;q=0.4,en;q=0.2';
I18n::loadTranslations();
$this->assertEquals('cs', I18n::getLanguage(), 'browser language cs');
- Read upRead up
Duplicated Code
Duplicated code can lead to software that is hard to understand and difficult to change. The Don't Repeat Yourself (DRY) principle states:
Every piece of knowledge must have a single, unambiguous, authoritative representation within a system.
When you violate DRY, bugs and maintenance problems are sure to follow. Duplicated code has a tendency to both continue to replicate and also to diverge (leaving bugs as two similar implementations differ in subtle ways).
Tuning
This issue has a mass of 141.
We set useful threshold defaults for the languages we support but you may want to adjust these settings based on your project guidelines.
The threshold configuration represents the minimum mass a code block must have to be analyzed for duplication. The lower the threshold, the more fine-grained the comparison.
If the engine is too easily reporting duplication, try raising the threshold. If you suspect that the engine isn't catching enough duplication, try lowering the threshold. The best setting tends to differ from language to language.
See codeclimate-duplication
's documentation for more information about tuning the mass threshold in your .codeclimate.yml
.
Refactorings
- Extract Method
- Extract Class
- Form Template Method
- Introduce Null Object
- Pull Up Method
- Pull Up Field
- Substitute Algorithm
Further Reading
- Don't Repeat Yourself on the C2 Wiki
- Duplicated Code on SourceMaking
- Refactoring: Improving the Design of Existing Code by Martin Fowler. Duplicated Code, p76
Similar blocks of code found in 2 locations. Consider refactoring. Open
public function testBrowserLanguageRuDetection()
{
$_SERVER['HTTP_ACCEPT_LANGUAGE'] = 'ru;q=0.8,en-GB;q=0.6,en-US;q=0.4,en;q=0.2';
I18n::loadTranslations();
$this->assertEquals('ru', I18n::getLanguage(), 'browser language ru');
- Read upRead up
Duplicated Code
Duplicated code can lead to software that is hard to understand and difficult to change. The Don't Repeat Yourself (DRY) principle states:
Every piece of knowledge must have a single, unambiguous, authoritative representation within a system.
When you violate DRY, bugs and maintenance problems are sure to follow. Duplicated code has a tendency to both continue to replicate and also to diverge (leaving bugs as two similar implementations differ in subtle ways).
Tuning
This issue has a mass of 141.
We set useful threshold defaults for the languages we support but you may want to adjust these settings based on your project guidelines.
The threshold configuration represents the minimum mass a code block must have to be analyzed for duplication. The lower the threshold, the more fine-grained the comparison.
If the engine is too easily reporting duplication, try raising the threshold. If you suspect that the engine isn't catching enough duplication, try lowering the threshold. The best setting tends to differ from language to language.
See codeclimate-duplication
's documentation for more information about tuning the mass threshold in your .codeclimate.yml
.
Refactorings
- Extract Method
- Extract Class
- Form Template Method
- Introduce Null Object
- Pull Up Method
- Pull Up Field
- Substitute Algorithm
Further Reading
- Don't Repeat Yourself on the C2 Wiki
- Duplicated Code on SourceMaking
- Refactoring: Improving the Design of Existing Code by Martin Fowler. Duplicated Code, p76
Similar blocks of code found in 2 locations. Consider refactoring. Open
'{"iv":"WA42mdxIVXUwBqZu7JYNiw==","v":1,"iter":10000,"ks"' +
':256,"ts":128,"mode":"gcm","adata":"","cipher":"aes","sa' +
'lt":"jN6CjbQMJCM=","ct":"kYYMo5DFG1+w0UHiYXT5pdV0IUuXxzO' +
'lslkW/c3DRCbGFROCVkAskHce7HoRczee1N9c5MhHjVMJUIZE02qIS8U' +
'yHdJ/GqcPVidTUcj9rnDNWsTXkjVv8jCwHS/cwmAjDTWpwp5ThECN+ov' +
- Read upRead up
Duplicated Code
Duplicated code can lead to software that is hard to understand and difficult to change. The Don't Repeat Yourself (DRY) principle states:
Every piece of knowledge must have a single, unambiguous, authoritative representation within a system.
When you violate DRY, bugs and maintenance problems are sure to follow. Duplicated code has a tendency to both continue to replicate and also to diverge (leaving bugs as two similar implementations differ in subtle ways).
Tuning
This issue has a mass of 82.
We set useful threshold defaults for the languages we support but you may want to adjust these settings based on your project guidelines.
The threshold configuration represents the minimum mass a code block must have to be analyzed for duplication. The lower the threshold, the more fine-grained the comparison.
If the engine is too easily reporting duplication, try raising the threshold. If you suspect that the engine isn't catching enough duplication, try lowering the threshold. The best setting tends to differ from language to language.
See codeclimate-duplication
's documentation for more information about tuning the mass threshold in your .codeclimate.yml
.
Refactorings
- Extract Method
- Extract Class
- Form Template Method
- Introduce Null Object
- Pull Up Method
- Pull Up Field
- Substitute Algorithm
Further Reading
- Don't Repeat Yourself on the C2 Wiki
- Duplicated Code on SourceMaking
- Refactoring: Improving the Design of Existing Code by Martin Fowler. Duplicated Code, p76
Similar blocks of code found in 2 locations. Consider refactoring. Open
'{"iv":"4HNFIl7eYbCh6HuShctTIA==","v":1,"iter":10000,"ks"' +
':256,"ts":128,"mode":"gcm","adata":"","cipher":"aes","sa' +
'lt":"u0lQvePq6L0=","ct":"fGPUVrDyaVr1ZDGb+kqQ3CPEW8x4YKG' +
'fzHDmA0Vjkh250aWNe7Cnigkps9aaFVMX9AaerrTp3yZbojJtNqVGMfL' +
'dUTu+53xmZHqRKxCCqSfDNSNoW4Oxk5OVgAtRyuG4bXHDsWTXDNz2xce' +
- Read upRead up
Duplicated Code
Duplicated code can lead to software that is hard to understand and difficult to change. The Don't Repeat Yourself (DRY) principle states:
Every piece of knowledge must have a single, unambiguous, authoritative representation within a system.
When you violate DRY, bugs and maintenance problems are sure to follow. Duplicated code has a tendency to both continue to replicate and also to diverge (leaving bugs as two similar implementations differ in subtle ways).
Tuning
This issue has a mass of 82.
We set useful threshold defaults for the languages we support but you may want to adjust these settings based on your project guidelines.
The threshold configuration represents the minimum mass a code block must have to be analyzed for duplication. The lower the threshold, the more fine-grained the comparison.
If the engine is too easily reporting duplication, try raising the threshold. If you suspect that the engine isn't catching enough duplication, try lowering the threshold. The best setting tends to differ from language to language.
See codeclimate-duplication
's documentation for more information about tuning the mass threshold in your .codeclimate.yml
.
Refactorings
- Extract Method
- Extract Class
- Form Template Method
- Introduce Null Object
- Pull Up Method
- Pull Up Field
- Substitute Algorithm
Further Reading
- Don't Repeat Yourself on the C2 Wiki
- Duplicated Code on SourceMaking
- Refactoring: Improving the Design of Existing Code by Martin Fowler. Duplicated Code, p76
Similar blocks of code found in 2 locations. Consider refactoring. Open
function changeBurnAfterReading()
{
if (me.getBurnAfterReading()) {
$openDiscussionOption.addClass('buttondisabled');
$openDiscussion.prop('checked', false);
- Read upRead up
Duplicated Code
Duplicated code can lead to software that is hard to understand and difficult to change. The Don't Repeat Yourself (DRY) principle states:
Every piece of knowledge must have a single, unambiguous, authoritative representation within a system.
When you violate DRY, bugs and maintenance problems are sure to follow. Duplicated code has a tendency to both continue to replicate and also to diverge (leaving bugs as two similar implementations differ in subtle ways).
Tuning
This issue has a mass of 79.
We set useful threshold defaults for the languages we support but you may want to adjust these settings based on your project guidelines.
The threshold configuration represents the minimum mass a code block must have to be analyzed for duplication. The lower the threshold, the more fine-grained the comparison.
If the engine is too easily reporting duplication, try raising the threshold. If you suspect that the engine isn't catching enough duplication, try lowering the threshold. The best setting tends to differ from language to language.
See codeclimate-duplication
's documentation for more information about tuning the mass threshold in your .codeclimate.yml
.
Refactorings
- Extract Method
- Extract Class
- Form Template Method
- Introduce Null Object
- Pull Up Method
- Pull Up Field
- Substitute Algorithm
Further Reading
- Don't Repeat Yourself on the C2 Wiki
- Duplicated Code on SourceMaking
- Refactoring: Improving the Design of Existing Code by Martin Fowler. Duplicated Code, p76