Cyclomatic complexity is too high in method test_from_simplex. (7) Open
def test_from_simplex(self):
x = np.abs(np.random.random(size=(20,10,15)))
x = x / np.sum(x, axis=-1)[...,np.newaxis]
y = from_simplex(x)
- Read upRead up
- Exclude checks
Cyclomatic Complexity
Cyclomatic Complexity corresponds to the number of decisions a block of code contains plus 1. This number (also called McCabe number) is equal to the number of linearly independent paths through the code. This number can be used as a guide when testing conditional logic in blocks.
Radon analyzes the AST tree of a Python program to compute Cyclomatic Complexity. Statements have the following effects on Cyclomatic Complexity:
Construct | Effect on CC | Reasoning |
---|---|---|
if | +1 | An if statement is a single decision. |
elif | +1 | The elif statement adds another decision. |
else | +0 | The else statement does not cause a new decision. The decision is at the if. |
for | +1 | There is a decision at the start of the loop. |
while | +1 | There is a decision at the while statement. |
except | +1 | Each except branch adds a new conditional path of execution. |
finally | +0 | The finally block is unconditionally executed. |
with | +1 | The with statement roughly corresponds to a try/except block (see PEP 343 for details). |
assert | +1 | The assert statement internally roughly equals a conditional statement. |
Comprehension | +1 | A list/set/dict comprehension of generator expression is equivalent to a for loop. |
Boolean Operator | +1 | Every boolean operator (and, or) adds a decision point. |
Similar blocks of code found in 2 locations. Consider refactoring. Open
c - 1.01 * np.sqrt(s[0]) * U[:,0],
- Read upRead up
Duplicated Code
Duplicated code can lead to software that is hard to understand and difficult to change. The Don't Repeat Yourself (DRY) principle states:
Every piece of knowledge must have a single, unambiguous, authoritative representation within a system.
When you violate DRY, bugs and maintenance problems are sure to follow. Duplicated code has a tendency to both continue to replicate and also to diverge (leaving bugs as two similar implementations differ in subtle ways).
Tuning
This issue has a mass of 40.
We set useful threshold defaults for the languages we support but you may want to adjust these settings based on your project guidelines.
The threshold configuration represents the minimum mass a code block must have to be analyzed for duplication. The lower the threshold, the more fine-grained the comparison.
If the engine is too easily reporting duplication, try raising the threshold. If you suspect that the engine isn't catching enough duplication, try lowering the threshold. The best setting tends to differ from language to language.
See codeclimate-duplication
's documentation for more information about tuning the mass threshold in your .codeclimate.yml
.
Refactorings
- Extract Method
- Extract Class
- Form Template Method
- Introduce Null Object
- Pull Up Method
- Pull Up Field
- Substitute Algorithm
Further Reading
- Don't Repeat Yourself on the C2 Wiki
- Duplicated Code on SourceMaking
- Refactoring: Improving the Design of Existing Code by Martin Fowler. Duplicated Code, p76
Similar blocks of code found in 2 locations. Consider refactoring. Open
c - 0.99 * np.sqrt(s[0]) * U[:,0],
- Read upRead up
Duplicated Code
Duplicated code can lead to software that is hard to understand and difficult to change. The Don't Repeat Yourself (DRY) principle states:
Every piece of knowledge must have a single, unambiguous, authoritative representation within a system.
When you violate DRY, bugs and maintenance problems are sure to follow. Duplicated code has a tendency to both continue to replicate and also to diverge (leaving bugs as two similar implementations differ in subtle ways).
Tuning
This issue has a mass of 40.
We set useful threshold defaults for the languages we support but you may want to adjust these settings based on your project guidelines.
The threshold configuration represents the minimum mass a code block must have to be analyzed for duplication. The lower the threshold, the more fine-grained the comparison.
If the engine is too easily reporting duplication, try raising the threshold. If you suspect that the engine isn't catching enough duplication, try lowering the threshold. The best setting tends to differ from language to language.
See codeclimate-duplication
's documentation for more information about tuning the mass threshold in your .codeclimate.yml
.
Refactorings
- Extract Method
- Extract Class
- Form Template Method
- Introduce Null Object
- Pull Up Method
- Pull Up Field
- Substitute Algorithm
Further Reading
- Don't Repeat Yourself on the C2 Wiki
- Duplicated Code on SourceMaking
- Refactoring: Improving the Design of Existing Code by Martin Fowler. Duplicated Code, p76
Similar blocks of code found in 2 locations. Consider refactoring. Open
c + 0.99 * np.sqrt(s[2]) * U[:,2],
- Read upRead up
Duplicated Code
Duplicated code can lead to software that is hard to understand and difficult to change. The Don't Repeat Yourself (DRY) principle states:
Every piece of knowledge must have a single, unambiguous, authoritative representation within a system.
When you violate DRY, bugs and maintenance problems are sure to follow. Duplicated code has a tendency to both continue to replicate and also to diverge (leaving bugs as two similar implementations differ in subtle ways).
Tuning
This issue has a mass of 40.
We set useful threshold defaults for the languages we support but you may want to adjust these settings based on your project guidelines.
The threshold configuration represents the minimum mass a code block must have to be analyzed for duplication. The lower the threshold, the more fine-grained the comparison.
If the engine is too easily reporting duplication, try raising the threshold. If you suspect that the engine isn't catching enough duplication, try lowering the threshold. The best setting tends to differ from language to language.
See codeclimate-duplication
's documentation for more information about tuning the mass threshold in your .codeclimate.yml
.
Refactorings
- Extract Method
- Extract Class
- Form Template Method
- Introduce Null Object
- Pull Up Method
- Pull Up Field
- Substitute Algorithm
Further Reading
- Don't Repeat Yourself on the C2 Wiki
- Duplicated Code on SourceMaking
- Refactoring: Improving the Design of Existing Code by Martin Fowler. Duplicated Code, p76
Similar blocks of code found in 2 locations. Consider refactoring. Open
c + 1.01 * np.sqrt(s[2]) * U[:,2],
- Read upRead up
Duplicated Code
Duplicated code can lead to software that is hard to understand and difficult to change. The Don't Repeat Yourself (DRY) principle states:
Every piece of knowledge must have a single, unambiguous, authoritative representation within a system.
When you violate DRY, bugs and maintenance problems are sure to follow. Duplicated code has a tendency to both continue to replicate and also to diverge (leaving bugs as two similar implementations differ in subtle ways).
Tuning
This issue has a mass of 40.
We set useful threshold defaults for the languages we support but you may want to adjust these settings based on your project guidelines.
The threshold configuration represents the minimum mass a code block must have to be analyzed for duplication. The lower the threshold, the more fine-grained the comparison.
If the engine is too easily reporting duplication, try raising the threshold. If you suspect that the engine isn't catching enough duplication, try lowering the threshold. The best setting tends to differ from language to language.
See codeclimate-duplication
's documentation for more information about tuning the mass threshold in your .codeclimate.yml
.
Refactorings
- Extract Method
- Extract Class
- Form Template Method
- Introduce Null Object
- Pull Up Method
- Pull Up Field
- Substitute Algorithm
Further Reading
- Don't Repeat Yourself on the C2 Wiki
- Duplicated Code on SourceMaking
- Refactoring: Improving the Design of Existing Code by Martin Fowler. Duplicated Code, p76
Identical blocks of code found in 3 locations. Consider refactoring. Open
x = x / np.sum(x, axis=-1)[...,np.newaxis]
- Read upRead up
Duplicated Code
Duplicated code can lead to software that is hard to understand and difficult to change. The Don't Repeat Yourself (DRY) principle states:
Every piece of knowledge must have a single, unambiguous, authoritative representation within a system.
When you violate DRY, bugs and maintenance problems are sure to follow. Duplicated code has a tendency to both continue to replicate and also to diverge (leaving bugs as two similar implementations differ in subtle ways).
Tuning
This issue has a mass of 32.
We set useful threshold defaults for the languages we support but you may want to adjust these settings based on your project guidelines.
The threshold configuration represents the minimum mass a code block must have to be analyzed for duplication. The lower the threshold, the more fine-grained the comparison.
If the engine is too easily reporting duplication, try raising the threshold. If you suspect that the engine isn't catching enough duplication, try lowering the threshold. The best setting tends to differ from language to language.
See codeclimate-duplication
's documentation for more information about tuning the mass threshold in your .codeclimate.yml
.
Refactorings
- Extract Method
- Extract Class
- Form Template Method
- Introduce Null Object
- Pull Up Method
- Pull Up Field
- Substitute Algorithm
Further Reading
- Don't Repeat Yourself on the C2 Wiki
- Duplicated Code on SourceMaking
- Refactoring: Improving the Design of Existing Code by Martin Fowler. Duplicated Code, p76
Identical blocks of code found in 3 locations. Consider refactoring. Open
x = x / np.sum(x, axis=-1)[...,np.newaxis]
- Read upRead up
Duplicated Code
Duplicated code can lead to software that is hard to understand and difficult to change. The Don't Repeat Yourself (DRY) principle states:
Every piece of knowledge must have a single, unambiguous, authoritative representation within a system.
When you violate DRY, bugs and maintenance problems are sure to follow. Duplicated code has a tendency to both continue to replicate and also to diverge (leaving bugs as two similar implementations differ in subtle ways).
Tuning
This issue has a mass of 32.
We set useful threshold defaults for the languages we support but you may want to adjust these settings based on your project guidelines.
The threshold configuration represents the minimum mass a code block must have to be analyzed for duplication. The lower the threshold, the more fine-grained the comparison.
If the engine is too easily reporting duplication, try raising the threshold. If you suspect that the engine isn't catching enough duplication, try lowering the threshold. The best setting tends to differ from language to language.
See codeclimate-duplication
's documentation for more information about tuning the mass threshold in your .codeclimate.yml
.
Refactorings
- Extract Method
- Extract Class
- Form Template Method
- Introduce Null Object
- Pull Up Method
- Pull Up Field
- Substitute Algorithm
Further Reading
- Don't Repeat Yourself on the C2 Wiki
- Duplicated Code on SourceMaking
- Refactoring: Improving the Design of Existing Code by Martin Fowler. Duplicated Code, p76
Identical blocks of code found in 3 locations. Consider refactoring. Open
x = x / np.sum(x, axis=-1)[...,np.newaxis]
- Read upRead up
Duplicated Code
Duplicated code can lead to software that is hard to understand and difficult to change. The Don't Repeat Yourself (DRY) principle states:
Every piece of knowledge must have a single, unambiguous, authoritative representation within a system.
When you violate DRY, bugs and maintenance problems are sure to follow. Duplicated code has a tendency to both continue to replicate and also to diverge (leaving bugs as two similar implementations differ in subtle ways).
Tuning
This issue has a mass of 32.
We set useful threshold defaults for the languages we support but you may want to adjust these settings based on your project guidelines.
The threshold configuration represents the minimum mass a code block must have to be analyzed for duplication. The lower the threshold, the more fine-grained the comparison.
If the engine is too easily reporting duplication, try raising the threshold. If you suspect that the engine isn't catching enough duplication, try lowering the threshold. The best setting tends to differ from language to language.
See codeclimate-duplication
's documentation for more information about tuning the mass threshold in your .codeclimate.yml
.
Refactorings
- Extract Method
- Extract Class
- Form Template Method
- Introduce Null Object
- Pull Up Method
- Pull Up Field
- Substitute Algorithm
Further Reading
- Don't Repeat Yourself on the C2 Wiki
- Duplicated Code on SourceMaking
- Refactoring: Improving the Design of Existing Code by Martin Fowler. Duplicated Code, p76
Missing whitespace after ',' Open
x = np.array([[10,5],[0,1],[0,2],[0,3],[2,1],[3,1],[0.5,1.5]])
- Read upRead up
- Exclude checks
Each comma, semicolon or colon should be followed by whitespace.
Okay: [a, b]
Okay: (3,)
Okay: a[1:4]
Okay: a[:4]
Okay: a[1:]
Okay: a[1:4:2]
E231: ['a','b']
E231: foo(bar,baz)
E231: [{'a':'b'}]
Missing whitespace after ',' Open
assert(in_ellipsoid(c,A,c))
- Read upRead up
- Exclude checks
Each comma, semicolon or colon should be followed by whitespace.
Okay: [a, b]
Okay: (3,)
Okay: a[1:4]
Okay: a[:4]
Okay: a[1:]
Okay: a[1:4:2]
E231: ['a','b']
E231: foo(bar,baz)
E231: [{'a':'b'}]
Missing whitespace after ',' Open
A = np.array([[4,0], [0,1]])
- Read upRead up
- Exclude checks
Each comma, semicolon or colon should be followed by whitespace.
Okay: [a, b]
Okay: (3,)
Okay: a[1:4]
Okay: a[:4]
Okay: a[1:]
Okay: a[1:4:2]
E231: ['a','b']
E231: foo(bar,baz)
E231: [{'a':'b'}]
Missing whitespace after ',' Open
c + 1.01 * np.sqrt(s[2]) * U[:,2],
- Read upRead up
- Exclude checks
Each comma, semicolon or colon should be followed by whitespace.
Okay: [a, b]
Okay: (3,)
Okay: a[1:4]
Okay: a[:4]
Okay: a[1:]
Okay: a[1:4:2]
E231: ['a','b']
E231: foo(bar,baz)
E231: [{'a':'b'}]
Missing whitespace after ',' Open
np.array([1,0,1,0], dtype=bool)
- Read upRead up
- Exclude checks
Each comma, semicolon or colon should be followed by whitespace.
Okay: [a, b]
Okay: (3,)
Okay: a[1:4]
Okay: a[:4]
Okay: a[1:]
Okay: a[1:4:2]
E231: ['a','b']
E231: foo(bar,baz)
E231: [{'a':'b'}]
Missing whitespace after ',' Open
x = np.abs(np.random.random(size=(20,10,15)))
- Read upRead up
- Exclude checks
Each comma, semicolon or colon should be followed by whitespace.
Okay: [a, b]
Okay: (3,)
Okay: a[1:4]
Okay: a[:4]
Okay: a[1:]
Okay: a[1:4:2]
E231: ['a','b']
E231: foo(bar,baz)
E231: [{'a':'b'}]
Trailing whitespace Open
in_ellipsoid(x, A, c),
- Read upRead up
- Exclude checks
Trailing whitespace is superfluous.
The warning returned varies on whether the line itself is blank,
for easier filtering for those who want to indent their blank lines.
Okay: spam(1)\n#
W291: spam(1) \n#
W293: class Foo(object):\n \n bang = 12
Missing whitespace after ',' Open
x = np.abs(np.random.random(size=(20,10,15)))
- Read upRead up
- Exclude checks
Each comma, semicolon or colon should be followed by whitespace.
Okay: [a, b]
Okay: (3,)
Okay: a[1:4]
Okay: a[:4]
Okay: a[1:]
Okay: a[1:4:2]
E231: ['a','b']
E231: foo(bar,baz)
E231: [{'a':'b'}]
Missing whitespace after ',' Open
c - 0.99 * np.sqrt(s[0]) * U[:,0],
- Read upRead up
- Exclude checks
Each comma, semicolon or colon should be followed by whitespace.
Okay: [a, b]
Okay: (3,)
Okay: a[1:4]
Okay: a[:4]
Okay: a[1:]
Okay: a[1:4:2]
E231: ['a','b']
E231: foo(bar,baz)
E231: [{'a':'b'}]
Missing whitespace after ',' Open
np.array([1,0,1,0], dtype=bool)
- Read upRead up
- Exclude checks
Each comma, semicolon or colon should be followed by whitespace.
Okay: [a, b]
Okay: (3,)
Okay: a[1:4]
Okay: a[:4]
Okay: a[1:]
Okay: a[1:4:2]
E231: ['a','b']
E231: foo(bar,baz)
E231: [{'a':'b'}]
Missing whitespace after ',' Open
x = np.array([[10,5],[0,1],[0,2],[0,3],[2,1],[3,1],[0.5,1.5]])
- Read upRead up
- Exclude checks
Each comma, semicolon or colon should be followed by whitespace.
Okay: [a, b]
Okay: (3,)
Okay: a[1:4]
Okay: a[:4]
Okay: a[1:]
Okay: a[1:4:2]
E231: ['a','b']
E231: foo(bar,baz)
E231: [{'a':'b'}]
Missing whitespace after ',' Open
assert(in_ellipsoid(c,A,c))
- Read upRead up
- Exclude checks
Each comma, semicolon or colon should be followed by whitespace.
Okay: [a, b]
Okay: (3,)
Okay: a[1:4]
Okay: a[:4]
Okay: a[1:]
Okay: a[1:4:2]
E231: ['a','b']
E231: foo(bar,baz)
E231: [{'a':'b'}]
At least two spaces before inline comment Open
from __future__ import division # Ensures that a/b is always a float.
- Read upRead up
- Exclude checks
Separate inline comments by at least two spaces.
An inline comment is a comment on the same line as a statement.
Inline comments should be separated by at least two spaces from the
statement. They should start with a # and a single space.
Each line of a block comment starts with a # and a single space
(unless it is indented text inside the comment).
Okay: x = x + 1 # Increment x
Okay: x = x + 1 # Increment x
Okay: # Block comment
E261: x = x + 1 # Increment x
E262: x = x + 1 #Increment x
E262: x = x + 1 # Increment x
E265: #Block comment
E266: ### Block comment
Missing whitespace after ',' Open
x = np.array([[10,5],[0,1],[0,2],[0,3],[2,1],[3,1],[0.5,1.5]])
- Read upRead up
- Exclude checks
Each comma, semicolon or colon should be followed by whitespace.
Okay: [a, b]
Okay: (3,)
Okay: a[1:4]
Okay: a[:4]
Okay: a[1:]
Okay: a[1:4:2]
E231: ['a','b']
E231: foo(bar,baz)
E231: [{'a':'b'}]
Missing whitespace after ',' Open
x = np.array([[10,5],[0,1],[0,2],[0,3],[2,1],[3,1],[0.5,1.5]])
- Read upRead up
- Exclude checks
Each comma, semicolon or colon should be followed by whitespace.
Okay: [a, b]
Okay: (3,)
Okay: a[1:4]
Okay: a[:4]
Okay: a[1:]
Okay: a[1:4:2]
E231: ['a','b']
E231: foo(bar,baz)
E231: [{'a':'b'}]
Expected 2 blank lines, found 1 Open
class TestSimplexTransforms(DerandomizedTestCase):
- Read upRead up
- Exclude checks
Separate top-level function and class definitions with two blank lines.
Method definitions inside a class are separated by a single blank
line.
Extra blank lines may be used (sparingly) to separate groups of
related functions. Blank lines may be omitted between a bunch of
related one-liners (e.g. a set of dummy implementations).
Use blank lines in functions, sparingly, to indicate logical
sections.
Okay: def a():\n pass\n\n\ndef b():\n pass
Okay: def a():\n pass\n\n\nasync def b():\n pass
Okay: def a():\n pass\n\n\n# Foo\n# Bar\n\ndef b():\n pass
Okay: default = 1\nfoo = 1
Okay: classify = 1\nfoo = 1
E301: class Foo:\n b = 0\n def bar():\n pass
E302: def a():\n pass\n\ndef b(n):\n pass
E302: def a():\n pass\n\nasync def b(n):\n pass
E303: def a():\n pass\n\n\n\ndef b(n):\n pass
E303: def a():\n\n\n\n pass
E304: @decorator\n\ndef a():\n pass
E305: def a():\n pass\na()
E306: def a():\n def b():\n pass\n def c():\n pass
Missing whitespace after ',' Open
y = np.random.random(size=(20,10,15))
- Read upRead up
- Exclude checks
Each comma, semicolon or colon should be followed by whitespace.
Okay: [a, b]
Okay: (3,)
Okay: a[1:4]
Okay: a[:4]
Okay: a[1:]
Okay: a[1:4:2]
E231: ['a','b']
E231: foo(bar,baz)
E231: [{'a':'b'}]
Missing whitespace after ',' Open
x = np.array([[10,5],[0,1],[0,2],[0,3],[2,1],[3,1],[0.5,1.5]])
- Read upRead up
- Exclude checks
Each comma, semicolon or colon should be followed by whitespace.
Okay: [a, b]
Okay: (3,)
Okay: a[1:4]
Okay: a[:4]
Okay: a[1:]
Okay: a[1:4:2]
E231: ['a','b']
E231: foo(bar,baz)
E231: [{'a':'b'}]
Missing whitespace after ',' Open
x = x / np.sum(x, axis=-1)[...,np.newaxis]
- Read upRead up
- Exclude checks
Each comma, semicolon or colon should be followed by whitespace.
Okay: [a, b]
Okay: (3,)
Okay: a[1:4]
Okay: a[:4]
Okay: a[1:]
Okay: a[1:4:2]
E231: ['a','b']
E231: foo(bar,baz)
E231: [{'a':'b'}]
Expected 2 blank lines, found 1 Open
class TestNumericTests(DerandomizedTestCase):
- Read upRead up
- Exclude checks
Separate top-level function and class definitions with two blank lines.
Method definitions inside a class are separated by a single blank
line.
Extra blank lines may be used (sparingly) to separate groups of
related functions. Blank lines may be omitted between a bunch of
related one-liners (e.g. a set of dummy implementations).
Use blank lines in functions, sparingly, to indicate logical
sections.
Okay: def a():\n pass\n\n\ndef b():\n pass
Okay: def a():\n pass\n\n\nasync def b():\n pass
Okay: def a():\n pass\n\n\n# Foo\n# Bar\n\ndef b():\n pass
Okay: default = 1\nfoo = 1
Okay: classify = 1\nfoo = 1
E301: class Foo:\n b = 0\n def bar():\n pass
E302: def a():\n pass\n\ndef b(n):\n pass
E302: def a():\n pass\n\nasync def b(n):\n pass
E303: def a():\n pass\n\n\n\ndef b(n):\n pass
E303: def a():\n\n\n\n pass
E304: @decorator\n\ndef a():\n pass
E305: def a():\n pass\na()
E306: def a():\n def b():\n pass\n def c():\n pass
Missing whitespace after ',' Open
c = np.array([0,1])
- Read upRead up
- Exclude checks
Each comma, semicolon or colon should be followed by whitespace.
Okay: [a, b]
Okay: (3,)
Okay: a[1:4]
Okay: a[:4]
Okay: a[1:]
Okay: a[1:4:2]
E231: ['a','b']
E231: foo(bar,baz)
E231: [{'a':'b'}]
Missing whitespace after ',' Open
y = np.random.random(size=(20,10,15))
- Read upRead up
- Exclude checks
Each comma, semicolon or colon should be followed by whitespace.
Okay: [a, b]
Okay: (3,)
Okay: a[1:4]
Okay: a[:4]
Okay: a[1:]
Okay: a[1:4:2]
E231: ['a','b']
E231: foo(bar,baz)
E231: [{'a':'b'}]
Missing whitespace after ',' Open
x = x / np.sum(x, axis=-1)[...,np.newaxis]
- Read upRead up
- Exclude checks
Each comma, semicolon or colon should be followed by whitespace.
Okay: [a, b]
Okay: (3,)
Okay: a[1:4]
Okay: a[:4]
Okay: a[1:]
Okay: a[1:4:2]
E231: ['a','b']
E231: foo(bar,baz)
E231: [{'a':'b'}]
Trailing whitespace Open
only passes if the correct number of
- Read upRead up
- Exclude checks
Trailing whitespace is superfluous.
The warning returned varies on whether the line itself is blank,
for easier filtering for those who want to indent their blank lines.
Okay: spam(1)\n#
W291: spam(1) \n#
W293: class Foo(object):\n \n bang = 12
Missing whitespace after ',' Open
c + 0.99 * np.sqrt(s[2]) * U[:,2],
- Read upRead up
- Exclude checks
Each comma, semicolon or colon should be followed by whitespace.
Okay: [a, b]
Okay: (3,)
Okay: a[1:4]
Okay: a[:4]
Okay: a[1:]
Okay: a[1:4:2]
E231: ['a','b']
E231: foo(bar,baz)
E231: [{'a':'b'}]
Missing whitespace after ',' Open
c - 1.01 * np.sqrt(s[0]) * U[:,0],
- Read upRead up
- Exclude checks
Each comma, semicolon or colon should be followed by whitespace.
Okay: [a, b]
Okay: (3,)
Okay: a[1:4]
Okay: a[:4]
Okay: a[1:]
Okay: a[1:4:2]
E231: ['a','b']
E231: foo(bar,baz)
E231: [{'a':'b'}]
Missing whitespace after ',' Open
x = np.abs(np.random.random(size=(20,10,15)))
- Read upRead up
- Exclude checks
Each comma, semicolon or colon should be followed by whitespace.
Okay: [a, b]
Okay: (3,)
Okay: a[1:4]
Okay: a[:4]
Okay: a[1:]
Okay: a[1:4:2]
E231: ['a','b']
E231: foo(bar,baz)
E231: [{'a':'b'}]
Missing whitespace after ',' Open
y = np.random.random(size=(20,10,15))
- Read upRead up
- Exclude checks
Each comma, semicolon or colon should be followed by whitespace.
Okay: [a, b]
Okay: (3,)
Okay: a[1:4]
Okay: a[:4]
Okay: a[1:]
Okay: a[1:4:2]
E231: ['a','b']
E231: foo(bar,baz)
E231: [{'a':'b'}]
Missing whitespace after ',' Open
x = np.abs(np.random.random(size=(20,10,15)))
- Read upRead up
- Exclude checks
Each comma, semicolon or colon should be followed by whitespace.
Okay: [a, b]
Okay: (3,)
Okay: a[1:4]
Okay: a[:4]
Okay: a[1:]
Okay: a[1:4:2]
E231: ['a','b']
E231: foo(bar,baz)
E231: [{'a':'b'}]
Blank line contains whitespace Open
- Read upRead up
- Exclude checks
Trailing whitespace is superfluous.
The warning returned varies on whether the line itself is blank,
for easier filtering for those who want to indent their blank lines.
Okay: spam(1)\n#
W291: spam(1) \n#
W293: class Foo(object):\n \n bang = 12
Trailing whitespace Open
# the semi-major axes are the square roots of the
- Read upRead up
- Exclude checks
Trailing whitespace is superfluous.
The warning returned varies on whether the line itself is blank,
for easier filtering for those who want to indent their blank lines.
Okay: spam(1)\n#
W291: spam(1) \n#
W293: class Foo(object):\n \n bang = 12
Missing whitespace after ',' Open
x = np.array([[10,5],[0,1],[0,2],[0,3],[2,1],[3,1],[0.5,1.5]])
- Read upRead up
- Exclude checks
Each comma, semicolon or colon should be followed by whitespace.
Okay: [a, b]
Okay: (3,)
Okay: a[1:4]
Okay: a[:4]
Okay: a[1:]
Okay: a[1:4:2]
E231: ['a','b']
E231: foo(bar,baz)
E231: [{'a':'b'}]
Expected 2 blank lines, found 1 Open
class TestLinearAlgebra(DerandomizedTestCase):
- Read upRead up
- Exclude checks
Separate top-level function and class definitions with two blank lines.
Method definitions inside a class are separated by a single blank
line.
Extra blank lines may be used (sparingly) to separate groups of
related functions. Blank lines may be omitted between a bunch of
related one-liners (e.g. a set of dummy implementations).
Use blank lines in functions, sparingly, to indicate logical
sections.
Okay: def a():\n pass\n\n\ndef b():\n pass
Okay: def a():\n pass\n\n\nasync def b():\n pass
Okay: def a():\n pass\n\n\n# Foo\n# Bar\n\ndef b():\n pass
Okay: default = 1\nfoo = 1
Okay: classify = 1\nfoo = 1
E301: class Foo:\n b = 0\n def bar():\n pass
E302: def a():\n pass\n\ndef b(n):\n pass
E302: def a():\n pass\n\nasync def b(n):\n pass
E303: def a():\n pass\n\n\n\ndef b(n):\n pass
E303: def a():\n\n\n\n pass
E304: @decorator\n\ndef a():\n pass
E305: def a():\n pass\na()
E306: def a():\n def b():\n pass\n def c():\n pass
Missing whitespace after ',' Open
x = np.array([[10,5],[0,1],[0,2],[0,3],[2,1],[3,1],[0.5,1.5]])
- Read upRead up
- Exclude checks
Each comma, semicolon or colon should be followed by whitespace.
Okay: [a, b]
Okay: (3,)
Okay: a[1:4]
Okay: a[:4]
Okay: a[1:]
Okay: a[1:4:2]
E231: ['a','b']
E231: foo(bar,baz)
E231: [{'a':'b'}]
Missing whitespace after ',' Open
x = np.array([[10,5],[0,1],[0,2],[0,3],[2,1],[3,1],[0.5,1.5]])
- Read upRead up
- Exclude checks
Each comma, semicolon or colon should be followed by whitespace.
Okay: [a, b]
Okay: (3,)
Okay: a[1:4]
Okay: a[:4]
Okay: a[1:]
Okay: a[1:4:2]
E231: ['a','b']
E231: foo(bar,baz)
E231: [{'a':'b'}]
Trailing whitespace Open
in_ellipsoid(x, A, c),
- Read upRead up
- Exclude checks
Trailing whitespace is superfluous.
The warning returned varies on whether the line itself is blank,
for easier filtering for those who want to indent their blank lines.
Okay: spam(1)\n#
W291: spam(1) \n#
W293: class Foo(object):\n \n bang = 12
Line too long (96 > 79 characters) Open
from qinfer.utils import in_ellipsoid, assert_sigfigs_equal, sqrtm_psd, to_simplex, from_simplex
- Read upRead up
- Exclude checks
Limit all lines to a maximum of 79 characters.
There are still many devices around that are limited to 80 character
lines; plus, limiting windows to 80 characters makes it possible to
have several windows side-by-side. The default wrapping on such
devices looks ugly. Therefore, please limit all lines to a maximum
of 79 characters. For flowing long blocks of text (docstrings or
comments), limiting the length to 72 characters is recommended.
Reports error E501.
Missing whitespace after ',' Open
np.array([0, 1, 1, 0, 1, 0, 1],dtype=bool)
- Read upRead up
- Exclude checks
Each comma, semicolon or colon should be followed by whitespace.
Okay: [a, b]
Okay: (3,)
Okay: a[1:4]
Okay: a[:4]
Okay: a[1:]
Okay: a[1:4:2]
E231: ['a','b']
E231: foo(bar,baz)
E231: [{'a':'b'}]
Missing whitespace after ',' Open
y = np.random.random(size=(20,10,15))
- Read upRead up
- Exclude checks
Each comma, semicolon or colon should be followed by whitespace.
Okay: [a, b]
Okay: (3,)
Okay: a[1:4]
Okay: a[:4]
Okay: a[1:]
Okay: a[1:4:2]
E231: ['a','b']
E231: foo(bar,baz)
E231: [{'a':'b'}]
Missing whitespace after ',' Open
x = np.array([[10,5],[0,1],[0,2],[0,3],[2,1],[3,1],[0.5,1.5]])
- Read upRead up
- Exclude checks
Each comma, semicolon or colon should be followed by whitespace.
Okay: [a, b]
Okay: (3,)
Okay: a[1:4]
Okay: a[:4]
Okay: a[1:]
Okay: a[1:4:2]
E231: ['a','b']
E231: foo(bar,baz)
E231: [{'a':'b'}]
Missing whitespace after ',' Open
x = np.array([[10,5],[0,1],[0,2],[0,3],[2,1],[3,1],[0.5,1.5]])
- Read upRead up
- Exclude checks
Each comma, semicolon or colon should be followed by whitespace.
Okay: [a, b]
Okay: (3,)
Okay: a[1:4]
Okay: a[:4]
Okay: a[1:]
Okay: a[1:4:2]
E231: ['a','b']
E231: foo(bar,baz)
E231: [{'a':'b'}]
Missing whitespace after ',' Open
x = np.array([[10,5],[0,1],[0,2],[0,3],[2,1],[3,1],[0.5,1.5]])
- Read upRead up
- Exclude checks
Each comma, semicolon or colon should be followed by whitespace.
Okay: [a, b]
Okay: (3,)
Okay: a[1:4]
Okay: a[:4]
Okay: a[1:]
Okay: a[1:4:2]
E231: ['a','b']
E231: foo(bar,baz)
E231: [{'a':'b'}]
Missing whitespace after ',' Open
x = np.array([[10,5],[0,1],[0,2],[0,3],[2,1],[3,1],[0.5,1.5]])
- Read upRead up
- Exclude checks
Each comma, semicolon or colon should be followed by whitespace.
Okay: [a, b]
Okay: (3,)
Okay: a[1:4]
Okay: a[:4]
Okay: a[1:]
Okay: a[1:4:2]
E231: ['a','b']
E231: foo(bar,baz)
E231: [{'a':'b'}]
Missing whitespace after ',' Open
np.array([1,0,1,0], dtype=bool)
- Read upRead up
- Exclude checks
Each comma, semicolon or colon should be followed by whitespace.
Okay: [a, b]
Okay: (3,)
Okay: a[1:4]
Okay: a[:4]
Okay: a[1:]
Okay: a[1:4:2]
E231: ['a','b']
E231: foo(bar,baz)
E231: [{'a':'b'}]
Missing whitespace after ',' Open
x = x / np.sum(x, axis=-1)[...,np.newaxis]
- Read upRead up
- Exclude checks
Each comma, semicolon or colon should be followed by whitespace.
Okay: [a, b]
Okay: (3,)
Okay: a[1:4]
Okay: a[:4]
Okay: a[1:]
Okay: a[1:4:2]
E231: ['a','b']
E231: foo(bar,baz)
E231: [{'a':'b'}]
Line too long (80 > 79 characters) Open
from qinfer.tests.base_test import DerandomizedTestCase, MockModel, assert_warns
- Read upRead up
- Exclude checks
Limit all lines to a maximum of 79 characters.
There are still many devices around that are limited to 80 character
lines; plus, limiting windows to 80 characters makes it possible to
have several windows side-by-side. The default wrapping on such
devices looks ugly. Therefore, please limit all lines to a maximum
of 79 characters. For flowing long blocks of text (docstrings or
comments), limiting the length to 72 characters is recommended.
Reports error E501.
Missing whitespace after ',' Open
A = np.array([[4,0], [0,1]])
- Read upRead up
- Exclude checks
Each comma, semicolon or colon should be followed by whitespace.
Okay: [a, b]
Okay: (3,)
Okay: a[1:4]
Okay: a[:4]
Okay: a[1:]
Okay: a[1:4:2]
E231: ['a','b']
E231: foo(bar,baz)
E231: [{'a':'b'}]
Missing whitespace after ',' Open
x = np.array([[10,5],[0,1],[0,2],[0,3],[2,1],[3,1],[0.5,1.5]])
- Read upRead up
- Exclude checks
Each comma, semicolon or colon should be followed by whitespace.
Okay: [a, b]
Okay: (3,)
Okay: a[1:4]
Okay: a[:4]
Okay: a[1:]
Okay: a[1:4:2]
E231: ['a','b']
E231: foo(bar,baz)
E231: [{'a':'b'}]