ReadyResponder/ReadyResponder

This cop checks if the length of a block exceeds some maximum value. Comment lines can optionally be ignored. The maximum allowed length is configurable. The cop can be configured to ignore blocks passed to certain methods.

This cop checks if the length of a block exceeds some maximum value. Comment lines can optionally be ignored. The maximum allowed length is configurable. The cop can be configured to ignore blocks passed to certain methods.

Duplicated Code

Duplicated code can lead to software that is hard to understand and difficult to change. The Don't Repeat Yourself (DRY) principle states:

Every piece of knowledge must have a single, unambiguous, authoritative representation within a system.

When you violate DRY, bugs and maintenance problems are sure to follow. Duplicated code has a tendency to both continue to replicate and also to diverge (leaving bugs as two similar implementations differ in subtle ways).

Tuning

This issue has a mass of 31.

We set useful threshold defaults for the languages we support but you may want to adjust these settings based on your project guidelines.

The threshold configuration represents the minimum mass a code block must have to be analyzed for duplication. The lower the threshold, the more fine-grained the comparison.

If the engine is too easily reporting duplication, try raising the threshold. If you suspect that the engine isn't catching enough duplication, try lowering the threshold. The best setting tends to differ from language to language.

See codeclimate-duplication's documentation for more information about tuning the mass threshold in your .codeclimate.yml.

Refactorings

• Extract Method
• Extract Class
• Form Template Method
• Introduce Null Object
• Pull Up Method
• Pull Up Field
• Substitute Algorithm

Further Reading

• Don't Repeat Yourself on the C2 Wiki
• Duplicated Code on SourceMaking
• Refactoring: Improving the Design of Existing Code by Martin Fowler. Duplicated Code, p76

Duplicated Code

Duplicated code can lead to software that is hard to understand and difficult to change. The Don't Repeat Yourself (DRY) principle states:

Every piece of knowledge must have a single, unambiguous, authoritative representation within a system.

When you violate DRY, bugs and maintenance problems are sure to follow. Duplicated code has a tendency to both continue to replicate and also to diverge (leaving bugs as two similar implementations differ in subtle ways).

Tuning

This issue has a mass of 31.

We set useful threshold defaults for the languages we support but you may want to adjust these settings based on your project guidelines.

The threshold configuration represents the minimum mass a code block must have to be analyzed for duplication. The lower the threshold, the more fine-grained the comparison.

If the engine is too easily reporting duplication, try raising the threshold. If you suspect that the engine isn't catching enough duplication, try lowering the threshold. The best setting tends to differ from language to language.

See codeclimate-duplication's documentation for more information about tuning the mass threshold in your .codeclimate.yml.

Refactorings

• Extract Method
• Extract Class
• Form Template Method
• Introduce Null Object
• Pull Up Method
• Pull Up Field
• Substitute Algorithm

Further Reading

• Don't Repeat Yourself on the C2 Wiki
• Duplicated Code on SourceMaking
• Refactoring: Improving the Design of Existing Code by Martin Fowler. Duplicated Code, p76

Duplicated Code

Duplicated code can lead to software that is hard to understand and difficult to change. The Don't Repeat Yourself (DRY) principle states:

Every piece of knowledge must have a single, unambiguous, authoritative representation within a system.

When you violate DRY, bugs and maintenance problems are sure to follow. Duplicated code has a tendency to both continue to replicate and also to diverge (leaving bugs as two similar implementations differ in subtle ways).

Tuning

This issue has a mass of 31.

We set useful threshold defaults for the languages we support but you may want to adjust these settings based on your project guidelines.

The threshold configuration represents the minimum mass a code block must have to be analyzed for duplication. The lower the threshold, the more fine-grained the comparison.

If the engine is too easily reporting duplication, try raising the threshold. If you suspect that the engine isn't catching enough duplication, try lowering the threshold. The best setting tends to differ from language to language.

See codeclimate-duplication's documentation for more information about tuning the mass threshold in your .codeclimate.yml.

Refactorings

• Extract Method
• Extract Class
• Form Template Method
• Introduce Null Object
• Pull Up Method
• Pull Up Field
• Substitute Algorithm

Further Reading

• Don't Repeat Yourself on the C2 Wiki
• Duplicated Code on SourceMaking
• Refactoring: Improving the Design of Existing Code by Martin Fowler. Duplicated Code, p76

Duplicated Code

Duplicated code can lead to software that is hard to understand and difficult to change. The Don't Repeat Yourself (DRY) principle states:

Every piece of knowledge must have a single, unambiguous, authoritative representation within a system.

When you violate DRY, bugs and maintenance problems are sure to follow. Duplicated code has a tendency to both continue to replicate and also to diverge (leaving bugs as two similar implementations differ in subtle ways).

Tuning

This issue has a mass of 31.

We set useful threshold defaults for the languages we support but you may want to adjust these settings based on your project guidelines.

The threshold configuration represents the minimum mass a code block must have to be analyzed for duplication. The lower the threshold, the more fine-grained the comparison.

If the engine is too easily reporting duplication, try raising the threshold. If you suspect that the engine isn't catching enough duplication, try lowering the threshold. The best setting tends to differ from language to language.

See codeclimate-duplication's documentation for more information about tuning the mass threshold in your .codeclimate.yml.

Refactorings

• Extract Method
• Extract Class
• Form Template Method
• Introduce Null Object
• Pull Up Method
• Pull Up Field
• Substitute Algorithm

Further Reading

• Don't Repeat Yourself on the C2 Wiki
• Duplicated Code on SourceMaking
• Refactoring: Improving the Design of Existing Code by Martin Fowler. Duplicated Code, p76

Duplicated Code

Duplicated code can lead to software that is hard to understand and difficult to change. The Don't Repeat Yourself (DRY) principle states:

Every piece of knowledge must have a single, unambiguous, authoritative representation within a system.

When you violate DRY, bugs and maintenance problems are sure to follow. Duplicated code has a tendency to both continue to replicate and also to diverge (leaving bugs as two similar implementations differ in subtle ways).

Tuning

This issue has a mass of 31.

We set useful threshold defaults for the languages we support but you may want to adjust these settings based on your project guidelines.

The threshold configuration represents the minimum mass a code block must have to be analyzed for duplication. The lower the threshold, the more fine-grained the comparison.

If the engine is too easily reporting duplication, try raising the threshold. If you suspect that the engine isn't catching enough duplication, try lowering the threshold. The best setting tends to differ from language to language.

See codeclimate-duplication's documentation for more information about tuning the mass threshold in your .codeclimate.yml.

Refactorings

• Extract Method
• Extract Class
• Form Template Method
• Introduce Null Object
• Pull Up Method
• Pull Up Field
• Substitute Algorithm

Further Reading

• Don't Repeat Yourself on the C2 Wiki
• Duplicated Code on SourceMaking
• Refactoring: Improving the Design of Existing Code by Martin Fowler. Duplicated Code, p76

Duplicated Code

Duplicated code can lead to software that is hard to understand and difficult to change. The Don't Repeat Yourself (DRY) principle states:

Every piece of knowledge must have a single, unambiguous, authoritative representation within a system.

When you violate DRY, bugs and maintenance problems are sure to follow. Duplicated code has a tendency to both continue to replicate and also to diverge (leaving bugs as two similar implementations differ in subtle ways).

Tuning

This issue has a mass of 31.

We set useful threshold defaults for the languages we support but you may want to adjust these settings based on your project guidelines.

The threshold configuration represents the minimum mass a code block must have to be analyzed for duplication. The lower the threshold, the more fine-grained the comparison.

If the engine is too easily reporting duplication, try raising the threshold. If you suspect that the engine isn't catching enough duplication, try lowering the threshold. The best setting tends to differ from language to language.

See codeclimate-duplication's documentation for more information about tuning the mass threshold in your .codeclimate.yml.

Refactorings

• Extract Method
• Extract Class
• Form Template Method
• Introduce Null Object
• Pull Up Method
• Pull Up Field
• Substitute Algorithm

Further Reading

• Don't Repeat Yourself on the C2 Wiki
• Duplicated Code on SourceMaking
• Refactoring: Improving the Design of Existing Code by Martin Fowler. Duplicated Code, p76

This cop checks whether the end statement of a do..end block is on its own line.

Example:

# bad
blah do |i|
  foo(i) end

# good
blah do |i|
  foo(i)
end

# bad
blah { |i|
  foo(i) }

# good
blah { |i|
  foo(i)
}

Checks for comma (,) preceded by space.

Example:

# bad
[1 , 2 , 3]
a(1 , 2)
each { |a , b| }

# good
[1, 2, 3]
a(1, 2)
each { |a, b| }

Check for uses of braces or do/end around single line or multi-line blocks.

Example: EnforcedStyle: linecountbased (default)

# bad - single line block
items.each do |item| item / 5 end

# good - single line block
items.each { |item| item / 5 }

# bad - multi-line block
things.map { |thing|
  something = thing.some_method
  process(something)
}

# good - multi-line block
things.map do |thing|
  something = thing.some_method
  process(something)
end

Example: EnforcedStyle: semantic

# Prefer `do...end` over `{...}` for procedural blocks.

# return value is used/assigned
# bad
foo = map do |x|
  x
end
puts (map do |x|
  x
end)

# return value is not used out of scope
# good
map do |x|
  x
end

# Prefer `{...}` over `do...end` for functional blocks.

# return value is not used out of scope
# bad
each { |x|
  x
}

# return value is used/assigned
# good
foo = map { |x|
  x
}
map { |x|
  x
}.inspect

Example: EnforcedStyle: bracesforchaining

# bad
words.each do |word|
  word.flip.flop
end.join("-")

# good
words.each { |word|
  word.flip.flop
}.join("-")

Checks if uses of quotes match the configured preference.

Example: EnforcedStyle: single_quotes (default)

# bad
"No special symbols"
"No string interpolation"
"Just text"

# good
'No special symbols'
'No string interpolation'
'Just text'
"Wait! What's #{this}!"

Example: EnforcedStyle: double_quotes

# bad
'Just some text'
'No special chars or interpolation'

# good
"Just some text"
"No special chars or interpolation"
"Every string in #{project} uses double_quotes"

Checks if uses of quotes match the configured preference.

Example: EnforcedStyle: single_quotes (default)

# bad
"No special symbols"
"No string interpolation"
"Just text"

# good
'No special symbols'
'No string interpolation'
'Just text'
"Wait! What's #{this}!"

Example: EnforcedStyle: double_quotes

# bad
'Just some text'
'No special chars or interpolation'

# good
"Just some text"
"No special chars or interpolation"
"Every string in #{project} uses double_quotes"

Checks if uses of quotes match the configured preference.

Example: EnforcedStyle: single_quotes (default)

# bad
"No special symbols"
"No string interpolation"
"Just text"

# good
'No special symbols'
'No string interpolation'
'Just text'
"Wait! What's #{this}!"

Example: EnforcedStyle: double_quotes

# bad
'Just some text'
'No special chars or interpolation'

# good
"Just some text"
"No special chars or interpolation"
"Every string in #{project} uses double_quotes"

Checks if uses of quotes match the configured preference.

Example: EnforcedStyle: single_quotes (default)

# bad
"No special symbols"
"No string interpolation"
"Just text"

# good
'No special symbols'
'No string interpolation'
'Just text'
"Wait! What's #{this}!"

Example: EnforcedStyle: double_quotes

# bad
'Just some text'
'No special chars or interpolation'

# good
"Just some text"
"No special chars or interpolation"
"Every string in #{project} uses double_quotes"

Check that the keys, separators, and values of a multi-line hash literal are aligned according to configuration. The configuration options are:

- key (left align keys)
- separator (align hash rockets and colons, right align keys)
- table (left align keys, hash rockets, and values)

The treatment of hashes passed as the last argument to a method call can also be configured. The options are:

- always_inspect
- always_ignore
- ignore_implicit (without curly braces)
- ignore_explicit (with curly braces)

Example:

# EnforcedHashRocketStyle: key (default)
# EnforcedColonStyle: key (default)

# good
{
  foo: bar,
  ba: baz
}
{
  :foo => bar,
  :ba => baz
}

# bad
{
  foo: bar,
   ba: baz
}
{
  :foo => bar,
   :ba => baz
}

Example:

# EnforcedHashRocketStyle: separator
# EnforcedColonStyle: separator

#good
{
  foo: bar,
   ba: baz
}
{
  :foo => bar,
   :ba => baz
}

#bad
{
  foo: bar,
  ba: baz
}
{
  :foo => bar,
  :ba => baz
}
{
  :foo => bar,
  :ba  => baz
}

Example:

# EnforcedHashRocketStyle: table
# EnforcedColonStyle: table

#good
{
  foo: bar,
  ba:  baz
}
{
  :foo => bar,
  :ba  => baz
}

#bad
{
  foo: bar,
  ba: baz
}
{
  :foo => bar,
   :ba => baz
}

Checks that block braces have or don't have surrounding space inside them on configuration. For blocks taking parameters, it checks that the left brace has or doesn't have trailing space depending on configuration.

Example: EnforcedStyle: space (default)

# The `space` style enforces that block braces have
# surrounding space.

# bad
some_array.each {puts e}

# good
some_array.each { puts e }

Example: EnforcedStyle: no_space

# The `no_space` style enforces that block braces don't
# have surrounding space.

# bad
some_array.each { puts e }

# good
some_array.each {puts e}

Example: EnforcedStyleForEmptyBraces: no_space (default)

# The `no_space` EnforcedStyleForEmptyBraces style enforces that
# block braces don't have a space in between when empty.

# bad
some_array.each {   }
some_array.each {  }
some_array.each { }

# good
some_array.each {}

Example: EnforcedStyleForEmptyBraces: space

# The `space` EnforcedStyleForEmptyBraces style enforces that
# block braces have at least a spece in between when empty.

# bad
some_array.each {}

# good
some_array.each { }
some_array.each {  }
some_array.each {   }

Example: SpaceBeforeBlockParameters: true (default)

# The SpaceBeforeBlockParameters style set to `true` enforces that
# there is a space between `{` and `|`. Overrides `EnforcedStyle`
# if there is a conflict.

# bad
[1, 2, 3].each {|n| n * 2 }

# good
[1, 2, 3].each { |n| n * 2 }

Example: SpaceBeforeBlockParameters: true

# The SpaceBeforeBlockParameters style set to `false` enforces that
# there is no space between `{` and `|`. Overrides `EnforcedStyle`
# if there is a conflict.

# bad
[1, 2, 3].each { |n| n * 2 }

# good
[1, 2, 3].each {|n| n * 2 }

Checks for spaces inside ordinary round parentheses.

Example:

# bad
f( 3)
g = (a + 3 )

# good
f(3)
g = (a + 3)

Check for uses of braces or do/end around single line or multi-line blocks.

Example: EnforcedStyle: linecountbased (default)

# bad - single line block
items.each do |item| item / 5 end

# good - single line block
items.each { |item| item / 5 }

# bad - multi-line block
things.map { |thing|
  something = thing.some_method
  process(something)
}

# good - multi-line block
things.map do |thing|
  something = thing.some_method
  process(something)
end

Example: EnforcedStyle: semantic

# Prefer `do...end` over `{...}` for procedural blocks.

# return value is used/assigned
# bad
foo = map do |x|
  x
end
puts (map do |x|
  x
end)

# return value is not used out of scope
# good
map do |x|
  x
end

# Prefer `{...}` over `do...end` for functional blocks.

# return value is not used out of scope
# bad
each { |x|
  x
}

# return value is used/assigned
# good
foo = map { |x|
  x
}
map { |x|
  x
}.inspect

Example: EnforcedStyle: bracesforchaining

# bad
words.each do |word|
  word.flip.flop
end.join("-")

# good
words.each { |word|
  word.flip.flop
}.join("-")

Check for uses of braces or do/end around single line or multi-line blocks.

Example: EnforcedStyle: linecountbased (default)

# bad - single line block
items.each do |item| item / 5 end

# good - single line block
items.each { |item| item / 5 }

# bad - multi-line block
things.map { |thing|
  something = thing.some_method
  process(something)
}

# good - multi-line block
things.map do |thing|
  something = thing.some_method
  process(something)
end

Example: EnforcedStyle: semantic

# Prefer `do...end` over `{...}` for procedural blocks.

# return value is used/assigned
# bad
foo = map do |x|
  x
end
puts (map do |x|
  x
end)

# return value is not used out of scope
# good
map do |x|
  x
end

# Prefer `{...}` over `do...end` for functional blocks.

# return value is not used out of scope
# bad
each { |x|
  x
}

# return value is used/assigned
# good
foo = map { |x|
  x
}
map { |x|
  x
}.inspect

Example: EnforcedStyle: bracesforchaining

# bad
words.each do |word|
  word.flip.flop
end.join("-")

# good
words.each { |word|
  word.flip.flop
}.join("-")

Check for uses of braces or do/end around single line or multi-line blocks.

Example: EnforcedStyle: linecountbased (default)

# bad - single line block
items.each do |item| item / 5 end

# good - single line block
items.each { |item| item / 5 }

# bad - multi-line block
things.map { |thing|
  something = thing.some_method
  process(something)
}

# good - multi-line block
things.map do |thing|
  something = thing.some_method
  process(something)
end

Example: EnforcedStyle: semantic

# Prefer `do...end` over `{...}` for procedural blocks.

# return value is used/assigned
# bad
foo = map do |x|
  x
end
puts (map do |x|
  x
end)

# return value is not used out of scope
# good
map do |x|
  x
end

# Prefer `{...}` over `do...end` for functional blocks.

# return value is not used out of scope
# bad
each { |x|
  x
}

# return value is used/assigned
# good
foo = map { |x|
  x
}
map { |x|
  x
}.inspect

Example: EnforcedStyle: bracesforchaining

# bad
words.each do |word|
  word.flip.flop
end.join("-")

# good
words.each { |word|
  word.flip.flop
}.join("-")

Checks if uses of quotes match the configured preference.

Example: EnforcedStyle: single_quotes (default)

# bad
"No special symbols"
"No string interpolation"
"Just text"

# good
'No special symbols'
'No string interpolation'
'Just text'
"Wait! What's #{this}!"

Example: EnforcedStyle: double_quotes

# bad
'Just some text'
'No special chars or interpolation'

# good
"Just some text"
"No special chars or interpolation"
"Every string in #{project} uses double_quotes"

Checks if uses of quotes match the configured preference.

Example: EnforcedStyle: single_quotes (default)

# bad
"No special symbols"
"No string interpolation"
"Just text"

# good
'No special symbols'
'No string interpolation'
'Just text'
"Wait! What's #{this}!"

Example: EnforcedStyle: double_quotes

# bad
'Just some text'
'No special chars or interpolation'

# good
"Just some text"
"No special chars or interpolation"
"Every string in #{project} uses double_quotes"

Checks if uses of quotes match the configured preference.

Example: EnforcedStyle: single_quotes (default)

# bad
"No special symbols"
"No string interpolation"
"Just text"

# good
'No special symbols'
'No string interpolation'
'Just text'
"Wait! What's #{this}!"

Example: EnforcedStyle: double_quotes

# bad
'Just some text'
'No special chars or interpolation'

# good
"Just some text"
"No special chars or interpolation"
"Every string in #{project} uses double_quotes"

Checks if uses of quotes match the configured preference.

Example: EnforcedStyle: single_quotes (default)

# bad
"No special symbols"
"No string interpolation"
"Just text"

# good
'No special symbols'
'No string interpolation'
'Just text'
"Wait! What's #{this}!"

Example: EnforcedStyle: double_quotes

# bad
'Just some text'
'No special chars or interpolation'

# good
"Just some text"
"No special chars or interpolation"
"Every string in #{project} uses double_quotes"

This cop checks whether the end statement of a do..end block is on its own line.

Example:

# bad
blah do |i|
  foo(i) end

# good
blah do |i|
  foo(i)
end

# bad
blah { |i|
  foo(i) }

# good
blah { |i|
  foo(i)
}

Checks that block braces have or don't have a space before the opening brace depending on configuration.

Example:

# bad
foo.map{ |a|
  a.bar.to_s
}

# good
foo.map { |a|
  a.bar.to_s
}

Checks for space between the name of a called method and a left parenthesis.

Example:

# bad

puts (x + y)

Example:

# good

puts(x + y)

Check for uses of braces or do/end around single line or multi-line blocks.

Example: EnforcedStyle: linecountbased (default)

# bad - single line block
items.each do |item| item / 5 end

# good - single line block
items.each { |item| item / 5 }

# bad - multi-line block
things.map { |thing|
  something = thing.some_method
  process(something)
}

# good - multi-line block
things.map do |thing|
  something = thing.some_method
  process(something)
end

Example: EnforcedStyle: semantic

# Prefer `do...end` over `{...}` for procedural blocks.

# return value is used/assigned
# bad
foo = map do |x|
  x
end
puts (map do |x|
  x
end)

# return value is not used out of scope
# good
map do |x|
  x
end

# Prefer `{...}` over `do...end` for functional blocks.

# return value is not used out of scope
# bad
each { |x|
  x
}

# return value is used/assigned
# good
foo = map { |x|
  x
}
map { |x|
  x
}.inspect

Example: EnforcedStyle: bracesforchaining

# bad
words.each do |word|
  word.flip.flop
end.join("-")

# good
words.each { |word|
  word.flip.flop
}.join("-")

Checks if uses of quotes match the configured preference.

Example: EnforcedStyle: single_quotes (default)

# bad
"No special symbols"
"No string interpolation"
"Just text"

# good
'No special symbols'
'No string interpolation'
'Just text'
"Wait! What's #{this}!"

Example: EnforcedStyle: double_quotes

# bad
'Just some text'
'No special chars or interpolation'

# good
"Just some text"
"No special chars or interpolation"
"Every string in #{project} uses double_quotes"

Checks if uses of quotes match the configured preference.

Example: EnforcedStyle: single_quotes (default)

# bad
"No special symbols"
"No string interpolation"
"Just text"

# good
'No special symbols'
'No string interpolation'
'Just text'
"Wait! What's #{this}!"

Example: EnforcedStyle: double_quotes

# bad
'Just some text'
'No special chars or interpolation'

# good
"Just some text"
"No special chars or interpolation"
"Every string in #{project} uses double_quotes"

Checks if uses of quotes match the configured preference.

Example: EnforcedStyle: single_quotes (default)

# bad
"No special symbols"
"No string interpolation"
"Just text"

# good
'No special symbols'
'No string interpolation'
'Just text'
"Wait! What's #{this}!"

Example: EnforcedStyle: double_quotes

# bad
'Just some text'
'No special chars or interpolation'

# good
"Just some text"
"No special chars or interpolation"
"Every string in #{project} uses double_quotes"

Check that the keys, separators, and values of a multi-line hash literal are aligned according to configuration. The configuration options are:

- key (left align keys)
- separator (align hash rockets and colons, right align keys)
- table (left align keys, hash rockets, and values)

The treatment of hashes passed as the last argument to a method call can also be configured. The options are:

- always_inspect
- always_ignore
- ignore_implicit (without curly braces)
- ignore_explicit (with curly braces)

Example:

# EnforcedHashRocketStyle: key (default)
# EnforcedColonStyle: key (default)

# good
{
  foo: bar,
  ba: baz
}
{
  :foo => bar,
  :ba => baz
}

# bad
{
  foo: bar,
   ba: baz
}
{
  :foo => bar,
   :ba => baz
}

Example:

# EnforcedHashRocketStyle: separator
# EnforcedColonStyle: separator

#good
{
  foo: bar,
   ba: baz
}
{
  :foo => bar,
   :ba => baz
}

#bad
{
  foo: bar,
  ba: baz
}
{
  :foo => bar,
  :ba => baz
}
{
  :foo => bar,
  :ba  => baz
}

Example:

# EnforcedHashRocketStyle: table
# EnforcedColonStyle: table

#good
{
  foo: bar,
  ba:  baz
}
{
  :foo => bar,
  :ba  => baz
}

#bad
{
  foo: bar,
  ba: baz
}
{
  :foo => bar,
   :ba => baz
}

This cop checks whether the multiline do end blocks have a newline after the start of the block. Additionally, it checks whether the block arguments, if any, are on the same line as the start of the block.

Example:

# bad
blah do |i| foo(i)
  bar(i)
end

# bad
blah do
  |i| foo(i)
  bar(i)
end

# good
blah do |i|
  foo(i)
  bar(i)
end

# bad
blah { |i| foo(i)
  bar(i)
}

# good
blah { |i|
  foo(i)
  bar(i)
}

This cop checks whether the multiline do end blocks have a newline after the start of the block. Additionally, it checks whether the block arguments, if any, are on the same line as the start of the block.

Example:

# bad
blah do |i| foo(i)
  bar(i)
end

# bad
blah do
  |i| foo(i)
  bar(i)
end

# good
blah do |i|
  foo(i)
  bar(i)
end

# bad
blah { |i| foo(i)
  bar(i)
}

# good
blah { |i|
  foo(i)
  bar(i)
}

Checks if uses of quotes match the configured preference.

Example: EnforcedStyle: single_quotes (default)

# bad
"No special symbols"
"No string interpolation"
"Just text"

# good
'No special symbols'
'No string interpolation'
'Just text'
"Wait! What's #{this}!"

Example: EnforcedStyle: double_quotes

# bad
'Just some text'
'No special chars or interpolation'

# good
"Just some text"
"No special chars or interpolation"
"Every string in #{project} uses double_quotes"

This cop checks whether the end statement of a do..end block is on its own line.

Example:

# bad
blah do |i|
  foo(i) end

# good
blah do |i|
  foo(i)
end

# bad
blah { |i|
  foo(i) }

# good
blah { |i|
  foo(i)
}

Checks that block braces have or don't have surrounding space inside them on configuration. For blocks taking parameters, it checks that the left brace has or doesn't have trailing space depending on configuration.

Example: EnforcedStyle: space (default)

# The `space` style enforces that block braces have
# surrounding space.

# bad
some_array.each {puts e}

# good
some_array.each { puts e }

Example: EnforcedStyle: no_space

# The `no_space` style enforces that block braces don't
# have surrounding space.

# bad
some_array.each { puts e }

# good
some_array.each {puts e}

Example: EnforcedStyleForEmptyBraces: no_space (default)

# The `no_space` EnforcedStyleForEmptyBraces style enforces that
# block braces don't have a space in between when empty.

# bad
some_array.each {   }
some_array.each {  }
some_array.each { }

# good
some_array.each {}

Example: EnforcedStyleForEmptyBraces: space

# The `space` EnforcedStyleForEmptyBraces style enforces that
# block braces have at least a spece in between when empty.

# bad
some_array.each {}

# good
some_array.each { }
some_array.each {  }
some_array.each {   }

Example: SpaceBeforeBlockParameters: true (default)

# The SpaceBeforeBlockParameters style set to `true` enforces that
# there is a space between `{` and `|`. Overrides `EnforcedStyle`
# if there is a conflict.

# bad
[1, 2, 3].each {|n| n * 2 }

# good
[1, 2, 3].each { |n| n * 2 }

Example: SpaceBeforeBlockParameters: true

# The SpaceBeforeBlockParameters style set to `false` enforces that
# there is no space between `{` and `|`. Overrides `EnforcedStyle`
# if there is a conflict.

# bad
[1, 2, 3].each { |n| n * 2 }

# good
[1, 2, 3].each {|n| n * 2 }

Checks for space between the name of a called method and a left parenthesis.

Example:

# bad

puts (x + y)

Example:

# good

puts(x + y)

This cop is designed to help upgrade to Ruby 3.0. It will add the comment # frozen_string_literal: true to the top of files to enable frozen string literals. Frozen string literals may be default in Ruby 3.0. The comment will be added below a shebang and encoding comment. The frozen string literal comment is only valid in Ruby 2.3+.

Example: EnforcedStyle: when_needed (default)

# The `when_needed` style will add the frozen string literal comment
# to files only when the `TargetRubyVersion` is set to 2.3+.
# bad
module Foo
  # ...
end

# good
# frozen_string_literal: true

module Foo
  # ...
end

Example: EnforcedStyle: always

# The `always` style will always add the frozen string literal comment
# to a file, regardless of the Ruby version or if `freeze` or `<<` are
# called on a string literal.
# bad
module Bar
  # ...
end

# good
# frozen_string_literal: true

module Bar
  # ...
end

Example: EnforcedStyle: never

# The `never` will enforce that the frozen string literal comment does
# not exist in a file.
# bad
# frozen_string_literal: true

module Baz
  # ...
end

# good
module Baz
  # ...
end

Checks if uses of quotes match the configured preference.

Example: EnforcedStyle: single_quotes (default)

# bad
"No special symbols"
"No string interpolation"
"Just text"

# good
'No special symbols'
'No string interpolation'
'Just text'
"Wait! What's #{this}!"

Example: EnforcedStyle: double_quotes

# bad
'Just some text'
'No special chars or interpolation'

# good
"Just some text"
"No special chars or interpolation"
"Every string in #{project} uses double_quotes"

This cops checks if empty lines around the bodies of blocks match the configuration.

Example: EnforcedStyle: empty_lines

# good

foo do |bar|

  # ...

end

Example: EnforcedStyle: noemptylines (default)

# good

foo do |bar|
  # ...
end

Checks for space between the name of a called method and a left parenthesis.

Example:

# bad

puts (x + y)

Example:

# good

puts(x + y)

Checks if uses of quotes match the configured preference.

Example: EnforcedStyle: single_quotes (default)

# bad
"No special symbols"
"No string interpolation"
"Just text"

# good
'No special symbols'
'No string interpolation'
'Just text'
"Wait! What's #{this}!"

Example: EnforcedStyle: double_quotes

# bad
'Just some text'
'No special chars or interpolation'

# good
"Just some text"
"No special chars or interpolation"
"Every string in #{project} uses double_quotes"

This cop checks whether the end statement of a do..end block is on its own line.

Example:

# bad
blah do |i|
  foo(i) end

# good
blah do |i|
  foo(i)
end

# bad
blah { |i|
  foo(i) }

# good
blah { |i|
  foo(i)
}

This cops checks if empty lines around the bodies of blocks match the configuration.

Example: EnforcedStyle: empty_lines

# good

foo do |bar|

  # ...

end

Example: EnforcedStyle: noemptylines (default)

# good

foo do |bar|
  # ...
end

Checks that block braces have or don't have a space before the opening brace depending on configuration.

Example:

# bad
foo.map{ |a|
  a.bar.to_s
}

# good
foo.map { |a|
  a.bar.to_s
}

Checks that block braces have or don't have a space before the opening brace depending on configuration.

Example:

# bad
foo.map{ |a|
  a.bar.to_s
}

# good
foo.map { |a|
  a.bar.to_s
}

Checks that block braces have or don't have surrounding space inside them on configuration. For blocks taking parameters, it checks that the left brace has or doesn't have trailing space depending on configuration.

Example: EnforcedStyle: space (default)

# The `space` style enforces that block braces have
# surrounding space.

# bad
some_array.each {puts e}

# good
some_array.each { puts e }

Example: EnforcedStyle: no_space

# The `no_space` style enforces that block braces don't
# have surrounding space.

# bad
some_array.each { puts e }

# good
some_array.each {puts e}

Example: EnforcedStyleForEmptyBraces: no_space (default)

# The `no_space` EnforcedStyleForEmptyBraces style enforces that
# block braces don't have a space in between when empty.

# bad
some_array.each {   }
some_array.each {  }
some_array.each { }

# good
some_array.each {}

Example: EnforcedStyleForEmptyBraces: space

# The `space` EnforcedStyleForEmptyBraces style enforces that
# block braces have at least a spece in between when empty.

# bad
some_array.each {}

# good
some_array.each { }
some_array.each {  }
some_array.each {   }

Example: SpaceBeforeBlockParameters: true (default)

# The SpaceBeforeBlockParameters style set to `true` enforces that
# there is a space between `{` and `|`. Overrides `EnforcedStyle`
# if there is a conflict.

# bad
[1, 2, 3].each {|n| n * 2 }

# good
[1, 2, 3].each { |n| n * 2 }

Example: SpaceBeforeBlockParameters: true

# The SpaceBeforeBlockParameters style set to `false` enforces that
# there is no space between `{` and `|`. Overrides `EnforcedStyle`
# if there is a conflict.

# bad
[1, 2, 3].each { |n| n * 2 }

# good
[1, 2, 3].each {|n| n * 2 }

Checks that block braces have or don't have surrounding space inside them on configuration. For blocks taking parameters, it checks that the left brace has or doesn't have trailing space depending on configuration.

Example: EnforcedStyle: space (default)

# The `space` style enforces that block braces have
# surrounding space.

# bad
some_array.each {puts e}

# good
some_array.each { puts e }

Example: EnforcedStyle: no_space

# The `no_space` style enforces that block braces don't
# have surrounding space.

# bad
some_array.each { puts e }

# good
some_array.each {puts e}

Example: EnforcedStyleForEmptyBraces: no_space (default)

# The `no_space` EnforcedStyleForEmptyBraces style enforces that
# block braces don't have a space in between when empty.

# bad
some_array.each {   }
some_array.each {  }
some_array.each { }

# good
some_array.each {}

Example: EnforcedStyleForEmptyBraces: space

# The `space` EnforcedStyleForEmptyBraces style enforces that
# block braces have at least a spece in between when empty.

# bad
some_array.each {}

# good
some_array.each { }
some_array.each {  }
some_array.each {   }

Example: SpaceBeforeBlockParameters: true (default)

# The SpaceBeforeBlockParameters style set to `true` enforces that
# there is a space between `{` and `|`. Overrides `EnforcedStyle`
# if there is a conflict.

# bad
[1, 2, 3].each {|n| n * 2 }

# good
[1, 2, 3].each { |n| n * 2 }

Example: SpaceBeforeBlockParameters: true

# The SpaceBeforeBlockParameters style set to `false` enforces that
# there is no space between `{` and `|`. Overrides `EnforcedStyle`
# if there is a conflict.

# bad
[1, 2, 3].each { |n| n * 2 }

# good
[1, 2, 3].each {|n| n * 2 }

Checks if uses of quotes match the configured preference.

Example: EnforcedStyle: single_quotes (default)

# bad
"No special symbols"
"No string interpolation"
"Just text"

# good
'No special symbols'
'No string interpolation'
'Just text'
"Wait! What's #{this}!"

Example: EnforcedStyle: double_quotes

# bad
'Just some text'
'No special chars or interpolation'

# good
"Just some text"
"No special chars or interpolation"
"Every string in #{project} uses double_quotes"

Checks if uses of quotes match the configured preference.

Example: EnforcedStyle: single_quotes (default)

# bad
"No special symbols"
"No string interpolation"
"Just text"

# good
'No special symbols'
'No string interpolation'
'Just text'
"Wait! What's #{this}!"

Example: EnforcedStyle: double_quotes

# bad
'Just some text'
'No special chars or interpolation'

# good
"Just some text"
"No special chars or interpolation"
"Every string in #{project} uses double_quotes"

Check that the keys, separators, and values of a multi-line hash literal are aligned according to configuration. The configuration options are:

- key (left align keys)
- separator (align hash rockets and colons, right align keys)
- table (left align keys, hash rockets, and values)

The treatment of hashes passed as the last argument to a method call can also be configured. The options are:

- always_inspect
- always_ignore
- ignore_implicit (without curly braces)
- ignore_explicit (with curly braces)

Example:

# EnforcedHashRocketStyle: key (default)
# EnforcedColonStyle: key (default)

# good
{
  foo: bar,
  ba: baz
}
{
  :foo => bar,
  :ba => baz
}

# bad
{
  foo: bar,
   ba: baz
}
{
  :foo => bar,
   :ba => baz
}

Example:

# EnforcedHashRocketStyle: separator
# EnforcedColonStyle: separator

#good
{
  foo: bar,
   ba: baz
}
{
  :foo => bar,
   :ba => baz
}

#bad
{
  foo: bar,
  ba: baz
}
{
  :foo => bar,
  :ba => baz
}
{
  :foo => bar,
  :ba  => baz
}

Example:

# EnforcedHashRocketStyle: table
# EnforcedColonStyle: table

#good
{
  foo: bar,
  ba:  baz
}
{
  :foo => bar,
  :ba  => baz
}

#bad
{
  foo: bar,
  ba: baz
}
{
  :foo => bar,
   :ba => baz
}

Check that the keys, separators, and values of a multi-line hash literal are aligned according to configuration. The configuration options are:

- key (left align keys)
- separator (align hash rockets and colons, right align keys)
- table (left align keys, hash rockets, and values)

The treatment of hashes passed as the last argument to a method call can also be configured. The options are:

- always_inspect
- always_ignore
- ignore_implicit (without curly braces)
- ignore_explicit (with curly braces)

Example:

# EnforcedHashRocketStyle: key (default)
# EnforcedColonStyle: key (default)

# good
{
  foo: bar,
  ba: baz
}
{
  :foo => bar,
  :ba => baz
}

# bad
{
  foo: bar,
   ba: baz
}
{
  :foo => bar,
   :ba => baz
}

Example:

# EnforcedHashRocketStyle: separator
# EnforcedColonStyle: separator

#good
{
  foo: bar,
   ba: baz
}
{
  :foo => bar,
   :ba => baz
}

#bad
{
  foo: bar,
  ba: baz
}
{
  :foo => bar,
  :ba => baz
}
{
  :foo => bar,
  :ba  => baz
}

Example:

# EnforcedHashRocketStyle: table
# EnforcedColonStyle: table

#good
{
  foo: bar,
  ba:  baz
}
{
  :foo => bar,
  :ba  => baz
}

#bad
{
  foo: bar,
  ba: baz
}
{
  :foo => bar,
   :ba => baz
}

This cop checks whether the end statement of a do..end block is on its own line.

Example:

# bad
blah do |i|
  foo(i) end

# good
blah do |i|
  foo(i)
end

# bad
blah { |i|
  foo(i) }

# good
blah { |i|
  foo(i)
}

This cop checks whether the end statement of a do..end block is on its own line.

Example:

# bad
blah do |i|
  foo(i) end

# good
blah do |i|
  foo(i)
end

# bad
blah { |i|
  foo(i) }

# good
blah { |i|
  foo(i)
}

Check that the keys, separators, and values of a multi-line hash literal are aligned according to configuration. The configuration options are:

- key (left align keys)
- separator (align hash rockets and colons, right align keys)
- table (left align keys, hash rockets, and values)

The treatment of hashes passed as the last argument to a method call can also be configured. The options are:

- always_inspect
- always_ignore
- ignore_implicit (without curly braces)
- ignore_explicit (with curly braces)

Example:

# EnforcedHashRocketStyle: key (default)
# EnforcedColonStyle: key (default)

# good
{
  foo: bar,
  ba: baz
}
{
  :foo => bar,
  :ba => baz
}

# bad
{
  foo: bar,
   ba: baz
}
{
  :foo => bar,
   :ba => baz
}

Example:

# EnforcedHashRocketStyle: separator
# EnforcedColonStyle: separator

#good
{
  foo: bar,
   ba: baz
}
{
  :foo => bar,
   :ba => baz
}

#bad
{
  foo: bar,
  ba: baz
}
{
  :foo => bar,
  :ba => baz
}
{
  :foo => bar,
  :ba  => baz
}

Example:

# EnforcedHashRocketStyle: table
# EnforcedColonStyle: table

#good
{
  foo: bar,
  ba:  baz
}
{
  :foo => bar,
  :ba  => baz
}

#bad
{
  foo: bar,
  ba: baz
}
{
  :foo => bar,
   :ba => baz
}

Checks that block braces have or don't have a space before the opening brace depending on configuration.

Example:

# bad
foo.map{ |a|
  a.bar.to_s
}

# good
foo.map { |a|
  a.bar.to_s
}

This cop checks whether the end statement of a do..end block is on its own line.

Example:

# bad
blah do |i|
  foo(i) end

# good
blah do |i|
  foo(i)
end

# bad
blah { |i|
  foo(i) }

# good
blah { |i|
  foo(i)
}

Checks that block braces have or don't have surrounding space inside them on configuration. For blocks taking parameters, it checks that the left brace has or doesn't have trailing space depending on configuration.

Example: EnforcedStyle: space (default)

# The `space` style enforces that block braces have
# surrounding space.

# bad
some_array.each {puts e}

# good
some_array.each { puts e }

Example: EnforcedStyle: no_space

# The `no_space` style enforces that block braces don't
# have surrounding space.

# bad
some_array.each { puts e }

# good
some_array.each {puts e}

Example: EnforcedStyleForEmptyBraces: no_space (default)

# The `no_space` EnforcedStyleForEmptyBraces style enforces that
# block braces don't have a space in between when empty.

# bad
some_array.each {   }
some_array.each {  }
some_array.each { }

# good
some_array.each {}

Example: EnforcedStyleForEmptyBraces: space

# The `space` EnforcedStyleForEmptyBraces style enforces that
# block braces have at least a spece in between when empty.

# bad
some_array.each {}

# good
some_array.each { }
some_array.each {  }
some_array.each {   }

Example: SpaceBeforeBlockParameters: true (default)

# The SpaceBeforeBlockParameters style set to `true` enforces that
# there is a space between `{` and `|`. Overrides `EnforcedStyle`
# if there is a conflict.

# bad
[1, 2, 3].each {|n| n * 2 }

# good
[1, 2, 3].each { |n| n * 2 }

Example: SpaceBeforeBlockParameters: true

# The SpaceBeforeBlockParameters style set to `false` enforces that
# there is no space between `{` and `|`. Overrides `EnforcedStyle`
# if there is a conflict.

# bad
[1, 2, 3].each { |n| n * 2 }

# good
[1, 2, 3].each {|n| n * 2 }

This cop checks whether the multiline do end blocks have a newline after the start of the block. Additionally, it checks whether the block arguments, if any, are on the same line as the start of the block.

Example:

# bad
blah do |i| foo(i)
  bar(i)
end

# bad
blah do
  |i| foo(i)
  bar(i)
end

# good
blah do |i|
  foo(i)
  bar(i)
end

# bad
blah { |i| foo(i)
  bar(i)
}

# good
blah { |i|
  foo(i)
  bar(i)
}

Checks that block braces have or don't have a space before the opening brace depending on configuration.

Example:

# bad
foo.map{ |a|
  a.bar.to_s
}

# good
foo.map { |a|
  a.bar.to_s
}

Checks that block braces have or don't have surrounding space inside them on configuration. For blocks taking parameters, it checks that the left brace has or doesn't have trailing space depending on configuration.

Example: EnforcedStyle: space (default)

# The `space` style enforces that block braces have
# surrounding space.

# bad
some_array.each {puts e}

# good
some_array.each { puts e }

Example: EnforcedStyle: no_space

# The `no_space` style enforces that block braces don't
# have surrounding space.

# bad
some_array.each { puts e }

# good
some_array.each {puts e}

Example: EnforcedStyleForEmptyBraces: no_space (default)

# The `no_space` EnforcedStyleForEmptyBraces style enforces that
# block braces don't have a space in between when empty.

# bad
some_array.each {   }
some_array.each {  }
some_array.each { }

# good
some_array.each {}

Example: EnforcedStyleForEmptyBraces: space

# The `space` EnforcedStyleForEmptyBraces style enforces that
# block braces have at least a spece in between when empty.

# bad
some_array.each {}

# good
some_array.each { }
some_array.each {  }
some_array.each {   }

Example: SpaceBeforeBlockParameters: true (default)

# The SpaceBeforeBlockParameters style set to `true` enforces that
# there is a space between `{` and `|`. Overrides `EnforcedStyle`
# if there is a conflict.

# bad
[1, 2, 3].each {|n| n * 2 }

# good
[1, 2, 3].each { |n| n * 2 }

Example: SpaceBeforeBlockParameters: true

# The SpaceBeforeBlockParameters style set to `false` enforces that
# there is no space between `{` and `|`. Overrides `EnforcedStyle`
# if there is a conflict.

# bad
[1, 2, 3].each { |n| n * 2 }

# good
[1, 2, 3].each {|n| n * 2 }

Checks for space between the name of a called method and a left parenthesis.

Example:

# bad

puts (x + y)

Example:

# good

puts(x + y)

Checks for space between the name of a called method and a left parenthesis.

Example:

# bad

puts (x + y)

Example:

# good

puts(x + y)

Check for uses of braces or do/end around single line or multi-line blocks.

Example: EnforcedStyle: linecountbased (default)

# bad - single line block
items.each do |item| item / 5 end

# good - single line block
items.each { |item| item / 5 }

# bad - multi-line block
things.map { |thing|
  something = thing.some_method
  process(something)
}

# good - multi-line block
things.map do |thing|
  something = thing.some_method
  process(something)
end

Example: EnforcedStyle: semantic

# Prefer `do...end` over `{...}` for procedural blocks.

# return value is used/assigned
# bad
foo = map do |x|
  x
end
puts (map do |x|
  x
end)

# return value is not used out of scope
# good
map do |x|
  x
end

# Prefer `{...}` over `do...end` for functional blocks.

# return value is not used out of scope
# bad
each { |x|
  x
}

# return value is used/assigned
# good
foo = map { |x|
  x
}
map { |x|
  x
}.inspect

Example: EnforcedStyle: bracesforchaining

# bad
words.each do |word|
  word.flip.flop
end.join("-")

# good
words.each { |word|
  word.flip.flop
}.join("-")

Checks if uses of quotes match the configured preference.

Example: EnforcedStyle: single_quotes (default)

# bad
"No special symbols"
"No string interpolation"
"Just text"

# good
'No special symbols'
'No string interpolation'
'Just text'
"Wait! What's #{this}!"

Example: EnforcedStyle: double_quotes

# bad
'Just some text'
'No special chars or interpolation'

# good
"Just some text"
"No special chars or interpolation"
"Every string in #{project} uses double_quotes"

Checks if uses of quotes match the configured preference.

Example: EnforcedStyle: single_quotes (default)

# bad
"No special symbols"
"No string interpolation"
"Just text"

# good
'No special symbols'
'No string interpolation'
'Just text'
"Wait! What's #{this}!"

Example: EnforcedStyle: double_quotes

# bad
'Just some text'
'No special chars or interpolation'

# good
"Just some text"
"No special chars or interpolation"
"Every string in #{project} uses double_quotes"

Check that the keys, separators, and values of a multi-line hash literal are aligned according to configuration. The configuration options are:

- key (left align keys)
- separator (align hash rockets and colons, right align keys)
- table (left align keys, hash rockets, and values)

The treatment of hashes passed as the last argument to a method call can also be configured. The options are:

- always_inspect
- always_ignore
- ignore_implicit (without curly braces)
- ignore_explicit (with curly braces)

Example:

# EnforcedHashRocketStyle: key (default)
# EnforcedColonStyle: key (default)

# good
{
  foo: bar,
  ba: baz
}
{
  :foo => bar,
  :ba => baz
}

# bad
{
  foo: bar,
   ba: baz
}
{
  :foo => bar,
   :ba => baz
}

Example:

# EnforcedHashRocketStyle: separator
# EnforcedColonStyle: separator

#good
{
  foo: bar,
   ba: baz
}
{
  :foo => bar,
   :ba => baz
}

#bad
{
  foo: bar,
  ba: baz
}
{
  :foo => bar,
  :ba => baz
}
{
  :foo => bar,
  :ba  => baz
}

Example:

# EnforcedHashRocketStyle: table
# EnforcedColonStyle: table

#good
{
  foo: bar,
  ba:  baz
}
{
  :foo => bar,
  :ba  => baz
}

#bad
{
  foo: bar,
  ba: baz
}
{
  :foo => bar,
   :ba => baz
}

This cop checks whether the end statement of a do..end block is on its own line.

Example:

# bad
blah do |i|
  foo(i) end

# good
blah do |i|
  foo(i)
end

# bad
blah { |i|
  foo(i) }

# good
blah { |i|
  foo(i)
}

This cop checks whether the multiline do end blocks have a newline after the start of the block. Additionally, it checks whether the block arguments, if any, are on the same line as the start of the block.

Example:

# bad
blah do |i| foo(i)
  bar(i)
end

# bad
blah do
  |i| foo(i)
  bar(i)
end

# good
blah do |i|
  foo(i)
  bar(i)
end

# bad
blah { |i| foo(i)
  bar(i)
}

# good
blah { |i|
  foo(i)
  bar(i)
}

Checks that block braces have or don't have a space before the opening brace depending on configuration.

Example:

# bad
foo.map{ |a|
  a.bar.to_s
}

# good
foo.map { |a|
  a.bar.to_s
}

Check that the keys, separators, and values of a multi-line hash literal are aligned according to configuration. The configuration options are:

- key (left align keys)
- separator (align hash rockets and colons, right align keys)
- table (left align keys, hash rockets, and values)

The treatment of hashes passed as the last argument to a method call can also be configured. The options are:

- always_inspect
- always_ignore
- ignore_implicit (without curly braces)
- ignore_explicit (with curly braces)

Example:

# EnforcedHashRocketStyle: key (default)
# EnforcedColonStyle: key (default)

# good
{
  foo: bar,
  ba: baz
}
{
  :foo => bar,
  :ba => baz
}

# bad
{
  foo: bar,
   ba: baz
}
{
  :foo => bar,
   :ba => baz
}

Example:

# EnforcedHashRocketStyle: separator
# EnforcedColonStyle: separator

#good
{
  foo: bar,
   ba: baz
}
{
  :foo => bar,
   :ba => baz
}

#bad
{
  foo: bar,
  ba: baz
}
{
  :foo => bar,
  :ba => baz
}
{
  :foo => bar,
  :ba  => baz
}

Example:

# EnforcedHashRocketStyle: table
# EnforcedColonStyle: table

#good
{
  foo: bar,
  ba:  baz
}
{
  :foo => bar,
  :ba  => baz
}

#bad
{
  foo: bar,
  ba: baz
}
{
  :foo => bar,
   :ba => baz
}

Checks that block braces have or don't have a space before the opening brace depending on configuration.

Example:

# bad
foo.map{ |a|
  a.bar.to_s
}

# good
foo.map { |a|
  a.bar.to_s
}

Checks if uses of quotes match the configured preference.

Example: EnforcedStyle: single_quotes (default)

# bad
"No special symbols"
"No string interpolation"
"Just text"

# good
'No special symbols'
'No string interpolation'
'Just text'
"Wait! What's #{this}!"

Example: EnforcedStyle: double_quotes

# bad
'Just some text'
'No special chars or interpolation'

# good
"Just some text"
"No special chars or interpolation"
"Every string in #{project} uses double_quotes"

Checks if uses of quotes match the configured preference.

Example: EnforcedStyle: single_quotes (default)

# bad
"No special symbols"
"No string interpolation"
"Just text"

# good
'No special symbols'
'No string interpolation'
'Just text'
"Wait! What's #{this}!"

Example: EnforcedStyle: double_quotes

# bad
'Just some text'
'No special chars or interpolation'

# good
"Just some text"
"No special chars or interpolation"
"Every string in #{project} uses double_quotes"

Check that the keys, separators, and values of a multi-line hash literal are aligned according to configuration. The configuration options are:

- key (left align keys)
- separator (align hash rockets and colons, right align keys)
- table (left align keys, hash rockets, and values)

The treatment of hashes passed as the last argument to a method call can also be configured. The options are:

- always_inspect
- always_ignore
- ignore_implicit (without curly braces)
- ignore_explicit (with curly braces)

Example:

# EnforcedHashRocketStyle: key (default)
# EnforcedColonStyle: key (default)

# good
{
  foo: bar,
  ba: baz
}
{
  :foo => bar,
  :ba => baz
}

# bad
{
  foo: bar,
   ba: baz
}
{
  :foo => bar,
   :ba => baz
}

Example:

# EnforcedHashRocketStyle: separator
# EnforcedColonStyle: separator

#good
{
  foo: bar,
   ba: baz
}
{
  :foo => bar,
   :ba => baz
}

#bad
{
  foo: bar,
  ba: baz
}
{
  :foo => bar,
  :ba => baz
}
{
  :foo => bar,
  :ba  => baz
}

Example:

# EnforcedHashRocketStyle: table
# EnforcedColonStyle: table

#good
{
  foo: bar,
  ba:  baz
}
{
  :foo => bar,
  :ba  => baz
}

#bad
{
  foo: bar,
  ba: baz
}
{
  :foo => bar,
   :ba => baz
}

This cop checks whether the multiline do end blocks have a newline after the start of the block. Additionally, it checks whether the block arguments, if any, are on the same line as the start of the block.

Example:

# bad
blah do |i| foo(i)
  bar(i)
end

# bad
blah do
  |i| foo(i)
  bar(i)
end

# good
blah do |i|
  foo(i)
  bar(i)
end

# bad
blah { |i| foo(i)
  bar(i)
}

# good
blah { |i|
  foo(i)
  bar(i)
}

Checks for spaces inside ordinary round parentheses.

Example:

# bad
f( 3)
g = (a + 3 )

# good
f(3)
g = (a + 3)

Check for uses of braces or do/end around single line or multi-line blocks.

Example: EnforcedStyle: linecountbased (default)

# bad - single line block
items.each do |item| item / 5 end

# good - single line block
items.each { |item| item / 5 }

# bad - multi-line block
things.map { |thing|
  something = thing.some_method
  process(something)
}

# good - multi-line block
things.map do |thing|
  something = thing.some_method
  process(something)
end

Example: EnforcedStyle: semantic

# Prefer `do...end` over `{...}` for procedural blocks.

# return value is used/assigned
# bad
foo = map do |x|
  x
end
puts (map do |x|
  x
end)

# return value is not used out of scope
# good
map do |x|
  x
end

# Prefer `{...}` over `do...end` for functional blocks.

# return value is not used out of scope
# bad
each { |x|
  x
}

# return value is used/assigned
# good
foo = map { |x|
  x
}
map { |x|
  x
}.inspect

Example: EnforcedStyle: bracesforchaining

# bad
words.each do |word|
  word.flip.flop
end.join("-")

# good
words.each { |word|
  word.flip.flop
}.join("-")

Checks if uses of quotes match the configured preference.

Example: EnforcedStyle: single_quotes (default)

# bad
"No special symbols"
"No string interpolation"
"Just text"

# good
'No special symbols'
'No string interpolation'
'Just text'
"Wait! What's #{this}!"

Example: EnforcedStyle: double_quotes

# bad
'Just some text'
'No special chars or interpolation'

# good
"Just some text"
"No special chars or interpolation"
"Every string in #{project} uses double_quotes"

Checks if uses of quotes match the configured preference.

Example: EnforcedStyle: single_quotes (default)

# bad
"No special symbols"
"No string interpolation"
"Just text"

# good
'No special symbols'
'No string interpolation'
'Just text'
"Wait! What's #{this}!"

Example: EnforcedStyle: double_quotes

# bad
'Just some text'
'No special chars or interpolation'

# good
"Just some text"
"No special chars or interpolation"
"Every string in #{project} uses double_quotes"

Checks if uses of quotes match the configured preference.

Example: EnforcedStyle: single_quotes (default)

# bad
"No special symbols"
"No string interpolation"
"Just text"

# good
'No special symbols'
'No string interpolation'
'Just text'
"Wait! What's #{this}!"

Example: EnforcedStyle: double_quotes

# bad
'Just some text'
'No special chars or interpolation'

# good
"Just some text"
"No special chars or interpolation"
"Every string in #{project} uses double_quotes"

Checks if uses of quotes match the configured preference.

Example: EnforcedStyle: single_quotes (default)

# bad
"No special symbols"
"No string interpolation"
"Just text"

# good
'No special symbols'
'No string interpolation'
'Just text'
"Wait! What's #{this}!"

Example: EnforcedStyle: double_quotes

# bad
'Just some text'
'No special chars or interpolation'

# good
"Just some text"
"No special chars or interpolation"
"Every string in #{project} uses double_quotes"

Checks if uses of quotes match the configured preference.

Example: EnforcedStyle: single_quotes (default)

# bad
"No special symbols"
"No string interpolation"
"Just text"

# good
'No special symbols'
'No string interpolation'
'Just text'
"Wait! What's #{this}!"

Example: EnforcedStyle: double_quotes

# bad
'Just some text'
'No special chars or interpolation'

# good
"Just some text"
"No special chars or interpolation"
"Every string in #{project} uses double_quotes"

This cops checks if empty lines around the bodies of blocks match the configuration.

Example: EnforcedStyle: empty_lines

# good

foo do |bar|

  # ...

end

Example: EnforcedStyle: noemptylines (default)

# good

foo do |bar|
  # ...
end

This cop checks whether the multiline do end blocks have a newline after the start of the block. Additionally, it checks whether the block arguments, if any, are on the same line as the start of the block.

Example:

# bad
blah do |i| foo(i)
  bar(i)
end

# bad
blah do
  |i| foo(i)
  bar(i)
end

# good
blah do |i|
  foo(i)
  bar(i)
end

# bad
blah { |i| foo(i)
  bar(i)
}

# good
blah { |i|
  foo(i)
  bar(i)
}

Checks that block braces have or don't have a space before the opening brace depending on configuration.

Example:

# bad
foo.map{ |a|
  a.bar.to_s
}

# good
foo.map { |a|
  a.bar.to_s
}

Checks that block braces have or don't have surrounding space inside them on configuration. For blocks taking parameters, it checks that the left brace has or doesn't have trailing space depending on configuration.

Example: EnforcedStyle: space (default)

# The `space` style enforces that block braces have
# surrounding space.

# bad
some_array.each {puts e}

# good
some_array.each { puts e }

Example: EnforcedStyle: no_space

# The `no_space` style enforces that block braces don't
# have surrounding space.

# bad
some_array.each { puts e }

# good
some_array.each {puts e}

Example: EnforcedStyleForEmptyBraces: no_space (default)

# The `no_space` EnforcedStyleForEmptyBraces style enforces that
# block braces don't have a space in between when empty.

# bad
some_array.each {   }
some_array.each {  }
some_array.each { }

# good
some_array.each {}

Example: EnforcedStyleForEmptyBraces: space

# The `space` EnforcedStyleForEmptyBraces style enforces that
# block braces have at least a spece in between when empty.

# bad
some_array.each {}

# good
some_array.each { }
some_array.each {  }
some_array.each {   }

Example: SpaceBeforeBlockParameters: true (default)

# The SpaceBeforeBlockParameters style set to `true` enforces that
# there is a space between `{` and `|`. Overrides `EnforcedStyle`
# if there is a conflict.

# bad
[1, 2, 3].each {|n| n * 2 }

# good
[1, 2, 3].each { |n| n * 2 }

Example: SpaceBeforeBlockParameters: true

# The SpaceBeforeBlockParameters style set to `false` enforces that
# there is no space between `{` and `|`. Overrides `EnforcedStyle`
# if there is a conflict.

# bad
[1, 2, 3].each { |n| n * 2 }

# good
[1, 2, 3].each {|n| n * 2 }

Checks if uses of quotes match the configured preference.

Example: EnforcedStyle: single_quotes (default)

# bad
"No special symbols"
"No string interpolation"
"Just text"

# good
'No special symbols'
'No string interpolation'
'Just text'
"Wait! What's #{this}!"

Example: EnforcedStyle: double_quotes

# bad
'Just some text'
'No special chars or interpolation'

# good
"Just some text"
"No special chars or interpolation"
"Every string in #{project} uses double_quotes"

Checks if uses of quotes match the configured preference.

Example: EnforcedStyle: single_quotes (default)

# bad
"No special symbols"
"No string interpolation"
"Just text"

# good
'No special symbols'
'No string interpolation'
'Just text'
"Wait! What's #{this}!"

Example: EnforcedStyle: double_quotes

# bad
'Just some text'
'No special chars or interpolation'

# good
"Just some text"
"No special chars or interpolation"
"Every string in #{project} uses double_quotes"

Checks if uses of quotes match the configured preference.

Example: EnforcedStyle: single_quotes (default)

# bad
"No special symbols"
"No string interpolation"
"Just text"

# good
'No special symbols'
'No string interpolation'
'Just text'
"Wait! What's #{this}!"

Example: EnforcedStyle: double_quotes

# bad
'Just some text'
'No special chars or interpolation'

# good
"Just some text"
"No special chars or interpolation"
"Every string in #{project} uses double_quotes"

Checks if uses of quotes match the configured preference.

Example: EnforcedStyle: single_quotes (default)

# bad
"No special symbols"
"No string interpolation"
"Just text"

# good
'No special symbols'
'No string interpolation'
'Just text'
"Wait! What's #{this}!"

Example: EnforcedStyle: double_quotes

# bad
'Just some text'
'No special chars or interpolation'

# good
"Just some text"
"No special chars or interpolation"
"Every string in #{project} uses double_quotes"

This cop checks whether the multiline do end blocks have a newline after the start of the block. Additionally, it checks whether the block arguments, if any, are on the same line as the start of the block.

Example:

# bad
blah do |i| foo(i)
  bar(i)
end

# bad
blah do
  |i| foo(i)
  bar(i)
end

# good
blah do |i|
  foo(i)
  bar(i)
end

# bad
blah { |i| foo(i)
  bar(i)
}

# good
blah { |i|
  foo(i)
  bar(i)
}

Checks that block braces have or don't have surrounding space inside them on configuration. For blocks taking parameters, it checks that the left brace has or doesn't have trailing space depending on configuration.

Example: EnforcedStyle: space (default)

# The `space` style enforces that block braces have
# surrounding space.

# bad
some_array.each {puts e}

# good
some_array.each { puts e }

Example: EnforcedStyle: no_space

# The `no_space` style enforces that block braces don't
# have surrounding space.

# bad
some_array.each { puts e }

# good
some_array.each {puts e}

Example: EnforcedStyleForEmptyBraces: no_space (default)

# The `no_space` EnforcedStyleForEmptyBraces style enforces that
# block braces don't have a space in between when empty.

# bad
some_array.each {   }
some_array.each {  }
some_array.each { }

# good
some_array.each {}

Example: EnforcedStyleForEmptyBraces: space

# The `space` EnforcedStyleForEmptyBraces style enforces that
# block braces have at least a spece in between when empty.

# bad
some_array.each {}

# good
some_array.each { }
some_array.each {  }
some_array.each {   }

Example: SpaceBeforeBlockParameters: true (default)

# The SpaceBeforeBlockParameters style set to `true` enforces that
# there is a space between `{` and `|`. Overrides `EnforcedStyle`
# if there is a conflict.

# bad
[1, 2, 3].each {|n| n * 2 }

# good
[1, 2, 3].each { |n| n * 2 }

Example: SpaceBeforeBlockParameters: true

# The SpaceBeforeBlockParameters style set to `false` enforces that
# there is no space between `{` and `|`. Overrides `EnforcedStyle`
# if there is a conflict.

# bad
[1, 2, 3].each { |n| n * 2 }

# good
[1, 2, 3].each {|n| n * 2 }

Checks for space between the name of a called method and a left parenthesis.

Example:

# bad

puts (x + y)

Example:

# good

puts(x + y)

Check for uses of braces or do/end around single line or multi-line blocks.

Example: EnforcedStyle: linecountbased (default)

# bad - single line block
items.each do |item| item / 5 end

# good - single line block
items.each { |item| item / 5 }

# bad - multi-line block
things.map { |thing|
  something = thing.some_method
  process(something)
}

# good - multi-line block
things.map do |thing|
  something = thing.some_method
  process(something)
end

Example: EnforcedStyle: semantic

# Prefer `do...end` over `{...}` for procedural blocks.

# return value is used/assigned
# bad
foo = map do |x|
  x
end
puts (map do |x|
  x
end)

# return value is not used out of scope
# good
map do |x|
  x
end

# Prefer `{...}` over `do...end` for functional blocks.

# return value is not used out of scope
# bad
each { |x|
  x
}

# return value is used/assigned
# good
foo = map { |x|
  x
}
map { |x|
  x
}.inspect

Example: EnforcedStyle: bracesforchaining

# bad
words.each do |word|
  word.flip.flop
end.join("-")

# good
words.each { |word|
  word.flip.flop
}.join("-")

Checks if uses of quotes match the configured preference.

Example: EnforcedStyle: single_quotes (default)

# bad
"No special symbols"
"No string interpolation"
"Just text"

# good
'No special symbols'
'No string interpolation'
'Just text'
"Wait! What's #{this}!"

Example: EnforcedStyle: double_quotes

# bad
'Just some text'
'No special chars or interpolation'

# good
"Just some text"
"No special chars or interpolation"
"Every string in #{project} uses double_quotes"

Checks if uses of quotes match the configured preference.

Example: EnforcedStyle: single_quotes (default)

# bad
"No special symbols"
"No string interpolation"
"Just text"

# good
'No special symbols'
'No string interpolation'
'Just text'
"Wait! What's #{this}!"

Example: EnforcedStyle: double_quotes

# bad
'Just some text'
'No special chars or interpolation'

# good
"Just some text"
"No special chars or interpolation"
"Every string in #{project} uses double_quotes"

Checks if uses of quotes match the configured preference.

Example: EnforcedStyle: single_quotes (default)

# bad
"No special symbols"
"No string interpolation"
"Just text"

# good
'No special symbols'
'No string interpolation'
'Just text'
"Wait! What's #{this}!"

Example: EnforcedStyle: double_quotes

# bad
'Just some text'
'No special chars or interpolation'

# good
"Just some text"
"No special chars or interpolation"
"Every string in #{project} uses double_quotes"

Checks if uses of quotes match the configured preference.

Example: EnforcedStyle: single_quotes (default)

# bad
"No special symbols"
"No string interpolation"
"Just text"

# good
'No special symbols'
'No string interpolation'
'Just text'
"Wait! What's #{this}!"

Example: EnforcedStyle: double_quotes

# bad
'Just some text'
'No special chars or interpolation'

# good
"Just some text"
"No special chars or interpolation"
"Every string in #{project} uses double_quotes"

This cop checks whether the multiline do end blocks have a newline after the start of the block. Additionally, it checks whether the block arguments, if any, are on the same line as the start of the block.

Example:

# bad
blah do |i| foo(i)
  bar(i)
end

# bad
blah do
  |i| foo(i)
  bar(i)
end

# good
blah do |i|
  foo(i)
  bar(i)
end

# bad
blah { |i| foo(i)
  bar(i)
}

# good
blah { |i|
  foo(i)
  bar(i)
}

Checks that block braces have or don't have a space before the opening brace depending on configuration.

Example:

# bad
foo.map{ |a|
  a.bar.to_s
}

# good
foo.map { |a|
  a.bar.to_s
}

Checks that block braces have or don't have a space before the opening brace depending on configuration.

Example:

# bad
foo.map{ |a|
  a.bar.to_s
}

# good
foo.map { |a|
  a.bar.to_s
}

Checks for space between the name of a called method and a left parenthesis.

Example:

# bad

puts (x + y)

Example:

# good

puts(x + y)

Checks for space between the name of a called method and a left parenthesis.

Example:

# bad

puts (x + y)

Example:

# good

puts(x + y)

Checks if uses of quotes match the configured preference.

Example: EnforcedStyle: single_quotes (default)

# bad
"No special symbols"
"No string interpolation"
"Just text"

# good
'No special symbols'
'No string interpolation'
'Just text'
"Wait! What's #{this}!"

Example: EnforcedStyle: double_quotes

# bad
'Just some text'
'No special chars or interpolation'

# good
"Just some text"
"No special chars or interpolation"
"Every string in #{project} uses double_quotes"

Checks if uses of quotes match the configured preference.

Example: EnforcedStyle: single_quotes (default)

# bad
"No special symbols"
"No string interpolation"
"Just text"

# good
'No special symbols'
'No string interpolation'
'Just text'
"Wait! What's #{this}!"

Example: EnforcedStyle: double_quotes

# bad
'Just some text'
'No special chars or interpolation'

# good
"Just some text"
"No special chars or interpolation"
"Every string in #{project} uses double_quotes"

Checks if uses of quotes match the configured preference.

Example: EnforcedStyle: single_quotes (default)

# bad
"No special symbols"
"No string interpolation"
"Just text"

# good
'No special symbols'
'No string interpolation'
'Just text'
"Wait! What's #{this}!"

Example: EnforcedStyle: double_quotes

# bad
'Just some text'
'No special chars or interpolation'

# good
"Just some text"
"No special chars or interpolation"
"Every string in #{project} uses double_quotes"

Checks if uses of quotes match the configured preference.

Example: EnforcedStyle: single_quotes (default)

# bad
"No special symbols"
"No string interpolation"
"Just text"

# good
'No special symbols'
'No string interpolation'
'Just text'
"Wait! What's #{this}!"

Example: EnforcedStyle: double_quotes

# bad
'Just some text'
'No special chars or interpolation'

# good
"Just some text"
"No special chars or interpolation"
"Every string in #{project} uses double_quotes"

Checks that block braces have or don't have surrounding space inside them on configuration. For blocks taking parameters, it checks that the left brace has or doesn't have trailing space depending on configuration.

Example: EnforcedStyle: space (default)

# The `space` style enforces that block braces have
# surrounding space.

# bad
some_array.each {puts e}

# good
some_array.each { puts e }

Example: EnforcedStyle: no_space

# The `no_space` style enforces that block braces don't
# have surrounding space.

# bad
some_array.each { puts e }

# good
some_array.each {puts e}

Example: EnforcedStyleForEmptyBraces: no_space (default)

# The `no_space` EnforcedStyleForEmptyBraces style enforces that
# block braces don't have a space in between when empty.

# bad
some_array.each {   }
some_array.each {  }
some_array.each { }

# good
some_array.each {}

Example: EnforcedStyleForEmptyBraces: space

# The `space` EnforcedStyleForEmptyBraces style enforces that
# block braces have at least a spece in between when empty.

# bad
some_array.each {}

# good
some_array.each { }
some_array.each {  }
some_array.each {   }

Example: SpaceBeforeBlockParameters: true (default)

# The SpaceBeforeBlockParameters style set to `true` enforces that
# there is a space between `{` and `|`. Overrides `EnforcedStyle`
# if there is a conflict.

# bad
[1, 2, 3].each {|n| n * 2 }

# good
[1, 2, 3].each { |n| n * 2 }

Example: SpaceBeforeBlockParameters: true

# The SpaceBeforeBlockParameters style set to `false` enforces that
# there is no space between `{` and `|`. Overrides `EnforcedStyle`
# if there is a conflict.

# bad
[1, 2, 3].each { |n| n * 2 }

# good
[1, 2, 3].each {|n| n * 2 }

Checks for space between the name of a called method and a left parenthesis.

Example:

# bad

puts (x + y)

Example:

# good

puts(x + y)

Checks if uses of quotes match the configured preference.

Example: EnforcedStyle: single_quotes (default)

# bad
"No special symbols"
"No string interpolation"
"Just text"

# good
'No special symbols'
'No string interpolation'
'Just text'
"Wait! What's #{this}!"

Example: EnforcedStyle: double_quotes

# bad
'Just some text'
'No special chars or interpolation'

# good
"Just some text"
"No special chars or interpolation"
"Every string in #{project} uses double_quotes"