Sign upLogin

RedHatInsights/insights-rbac-ui

View on GitHub
Star

Showing 381 of 381 total issues

Similar blocks of code found in 2 locations. Consider refactoring.
Open

  const { users, totalCount } = useSelector((state: RBACStore) => ({
    users: state.userReducer.users.data || [],
    totalCount: state.userReducer.users.meta.count,
  }));
Severity: Major
Found in src/smart-components/access-management/UsersTable.tsx and 1 other location - About 2 hrs to fix
src/smart-components/role/RolesTable.tsx on lines 42..45

Duplicated Code

Duplicated code can lead to software that is hard to understand and difficult to change. The Don't Repeat Yourself (DRY) principle states:

Every piece of knowledge must have a single, unambiguous, authoritative representation within a system.

When you violate DRY, bugs and maintenance problems are sure to follow. Duplicated code has a tendency to both continue to replicate and also to diverge (leaving bugs as two similar implementations differ in subtle ways).

Tuning

This issue has a mass of 76.

We set useful threshold defaults for the languages we support but you may want to adjust these settings based on your project guidelines.

The threshold configuration represents the minimum mass a code block must have to be analyzed for duplication. The lower the threshold, the more fine-grained the comparison.

If the engine is too easily reporting duplication, try raising the threshold. If you suspect that the engine isn't catching enough duplication, try lowering the threshold. The best setting tends to differ from language to language.

See codeclimate-duplication's documentation for more information about tuning the mass threshold in your .codeclimate.yml.

Refactorings

Further Reading

Similar blocks of code found in 2 locations. Consider refactoring.
Open

  groups: {
    ...state.groups,
    data: state.groups.data.map((group) => ({
      ...group,
      ...(group.uuid === meta.groupId && { roles: payload.data, isLoadingRoles: false }),
Severity: Major
Found in src/redux/reducers/group-reducer.ts and 1 other location - About 2 hrs to fix
src/redux/reducers/group-reducer.ts on lines 212..218

Duplicated Code

Duplicated code can lead to software that is hard to understand and difficult to change. The Don't Repeat Yourself (DRY) principle states:

Every piece of knowledge must have a single, unambiguous, authoritative representation within a system.

When you violate DRY, bugs and maintenance problems are sure to follow. Duplicated code has a tendency to both continue to replicate and also to diverge (leaving bugs as two similar implementations differ in subtle ways).

Tuning

This issue has a mass of 76.

We set useful threshold defaults for the languages we support but you may want to adjust these settings based on your project guidelines.

The threshold configuration represents the minimum mass a code block must have to be analyzed for duplication. The lower the threshold, the more fine-grained the comparison.

If the engine is too easily reporting duplication, try raising the threshold. If you suspect that the engine isn't catching enough duplication, try lowering the threshold. The best setting tends to differ from language to language.

See codeclimate-duplication's documentation for more information about tuning the mass threshold in your .codeclimate.yml.

Refactorings

Further Reading

Function onSubmit has 51 lines of code (exceeds 25 allowed). Consider refactoring.
Open

  const onSubmit = async (formData) => {
    const {
      'add-permissions-table': selectedPermissions,
      'cost-resources': costResources = [],
      'inventory-groups-role': invResources = [],
Severity: Major
Found in src/smart-components/role/add-role-permissions/add-role-permission-wizard.js - About 2 hrs to fix

    Similar blocks of code found in 2 locations. Consider refactoring.
    Open

              {groupNameValid === 'error' && (
            <FormHelperText>
              <HelperText>
                <HelperTextItem variant={groupNameValid}>{groupName ? groupNameError : intl.formatMessage(messages.required)}</HelperTextItem>
              </HelperText>
    Severity: Major
    Found in src/smart-components/group/add-group/set-name.js and 1 other location - About 2 hrs to fix
    src/smart-components/role/add-role/set-name.js on lines 58..64

    Duplicated Code

    Duplicated code can lead to software that is hard to understand and difficult to change. The Don't Repeat Yourself (DRY) principle states:

    Every piece of knowledge must have a single, unambiguous, authoritative representation within a system.

    When you violate DRY, bugs and maintenance problems are sure to follow. Duplicated code has a tendency to both continue to replicate and also to diverge (leaving bugs as two similar implementations differ in subtle ways).

    Tuning

    This issue has a mass of 75.

    We set useful threshold defaults for the languages we support but you may want to adjust these settings based on your project guidelines.

    The threshold configuration represents the minimum mass a code block must have to be analyzed for duplication. The lower the threshold, the more fine-grained the comparison.

    If the engine is too easily reporting duplication, try raising the threshold. If you suspect that the engine isn't catching enough duplication, try lowering the threshold. The best setting tends to differ from language to language.

    See codeclimate-duplication's documentation for more information about tuning the mass threshold in your .codeclimate.yml.

    Refactorings

    Further Reading

    Similar blocks of code found in 2 locations. Consider refactoring.
    Open

              {roleNameValid === 'error' && (
            <FormHelperText>
              <HelperText>
                <HelperTextItem variant={roleNameValid}>{roleName ? roleNameError : intl.formatMessage(messages.required)}</HelperTextItem>
              </HelperText>
    Severity: Major
    Found in src/smart-components/role/add-role/set-name.js and 1 other location - About 2 hrs to fix
    src/smart-components/group/add-group/set-name.js on lines 60..66

    Duplicated Code

    Duplicated code can lead to software that is hard to understand and difficult to change. The Don't Repeat Yourself (DRY) principle states:

    Every piece of knowledge must have a single, unambiguous, authoritative representation within a system.

    When you violate DRY, bugs and maintenance problems are sure to follow. Duplicated code has a tendency to both continue to replicate and also to diverge (leaving bugs as two similar implementations differ in subtle ways).

    Tuning

    This issue has a mass of 75.

    We set useful threshold defaults for the languages we support but you may want to adjust these settings based on your project guidelines.

    The threshold configuration represents the minimum mass a code block must have to be analyzed for duplication. The lower the threshold, the more fine-grained the comparison.

    If the engine is too easily reporting duplication, try raising the threshold. If you suspect that the engine isn't catching enough duplication, try lowering the threshold. The best setting tends to differ from language to language.

    See codeclimate-duplication's documentation for more information about tuning the mass threshold in your .codeclimate.yml.

    Refactorings

    Further Reading

    Similar blocks of code found in 3 locations. Consider refactoring.
    Open

          {
        title: `Viewing your project monitoring dashboard`,
        description: `### To view the project monitoring dashboard in the context of **nodejs-sample**:
1. Click on the **View monitoring dashboard** link in the side panel.
2. You can change the **Time Range** and **Refresh Interval** of the dashboard.
    Severity: Major
    Found in src/utilities/sample-quickstart.js and 2 other locations - About 1 hr to fix
    src/utilities/sample-quickstart.js on lines 18..37
    src/utilities/sample-quickstart.js on lines 54..70

    Duplicated Code

    Duplicated code can lead to software that is hard to understand and difficult to change. The Don't Repeat Yourself (DRY) principle states:

    Every piece of knowledge must have a single, unambiguous, authoritative representation within a system.

    When you violate DRY, bugs and maintenance problems are sure to follow. Duplicated code has a tendency to both continue to replicate and also to diverge (leaving bugs as two similar implementations differ in subtle ways).

    Tuning

    This issue has a mass of 74.

    We set useful threshold defaults for the languages we support but you may want to adjust these settings based on your project guidelines.

    The threshold configuration represents the minimum mass a code block must have to be analyzed for duplication. The lower the threshold, the more fine-grained the comparison.

    If the engine is too easily reporting duplication, try raising the threshold. If you suspect that the engine isn't catching enough duplication, try lowering the threshold. The best setting tends to differ from language to language.

    See codeclimate-duplication's documentation for more information about tuning the mass threshold in your .codeclimate.yml.

    Refactorings

    Further Reading

    Similar blocks of code found in 3 locations. Consider refactoring.
    Open

          {
        title: `Viewing custom metrics`,
        description: `### To view custom metrics:
1. Click on the **Metrics** tab of the **Monitoring** page.
2. Click the **Select Query** drop-down list to see the available queries.
    Severity: Major
    Found in src/utilities/sample-quickstart.js and 2 other locations - About 1 hr to fix
    src/utilities/sample-quickstart.js on lines 18..37
    src/utilities/sample-quickstart.js on lines 38..53

    Duplicated Code

    Duplicated code can lead to software that is hard to understand and difficult to change. The Don't Repeat Yourself (DRY) principle states:

    Every piece of knowledge must have a single, unambiguous, authoritative representation within a system.

    When you violate DRY, bugs and maintenance problems are sure to follow. Duplicated code has a tendency to both continue to replicate and also to diverge (leaving bugs as two similar implementations differ in subtle ways).

    Tuning

    This issue has a mass of 74.

    We set useful threshold defaults for the languages we support but you may want to adjust these settings based on your project guidelines.

    The threshold configuration represents the minimum mass a code block must have to be analyzed for duplication. The lower the threshold, the more fine-grained the comparison.

    If the engine is too easily reporting duplication, try raising the threshold. If you suspect that the engine isn't catching enough duplication, try lowering the threshold. The best setting tends to differ from language to language.

    See codeclimate-duplication's documentation for more information about tuning the mass threshold in your .codeclimate.yml.

    Refactorings

    Further Reading

    Similar blocks of code found in 3 locations. Consider refactoring.
    Open

          {
        title: `Viewing the monitoring details of your sample application`,
        description: `### To view the details of your sample application:
1. Go to the project your sample application was created in.
2. In the **</> Developer** perspective, go to **Topology** view.
    Severity: Major
    Found in src/utilities/sample-quickstart.js and 2 other locations - About 1 hr to fix
    src/utilities/sample-quickstart.js on lines 38..53
    src/utilities/sample-quickstart.js on lines 54..70

    Duplicated Code

    Duplicated code can lead to software that is hard to understand and difficult to change. The Don't Repeat Yourself (DRY) principle states:

    Every piece of knowledge must have a single, unambiguous, authoritative representation within a system.

    When you violate DRY, bugs and maintenance problems are sure to follow. Duplicated code has a tendency to both continue to replicate and also to diverge (leaving bugs as two similar implementations differ in subtle ways).

    Tuning

    This issue has a mass of 74.

    We set useful threshold defaults for the languages we support but you may want to adjust these settings based on your project guidelines.

    The threshold configuration represents the minimum mass a code block must have to be analyzed for duplication. The lower the threshold, the more fine-grained the comparison.

    If the engine is too easily reporting duplication, try raising the threshold. If you suspect that the engine isn't catching enough duplication, try lowering the threshold. The best setting tends to differ from language to language.

    See codeclimate-duplication's documentation for more information about tuning the mass threshold in your .codeclimate.yml.

    Refactorings

    Further Reading

    Function filterConfigBuilder has a Cognitive Complexity of 15 (exceeds 5 allowed). Consider refactoring.
    Open

    export const filterConfigBuilder = (
  isLoading,
  setFilterValue = () => undefined,
  fetchData = () => undefined,
  filterValue = '',
    Severity: Minor
    Found in src/presentational-components/shared/toolbar.js - About 1 hr to fix

    Cognitive Complexity

    Cognitive Complexity is a measure of how difficult a unit of code is to intuitively understand. Unlike Cyclomatic Complexity, which determines how difficult your code will be to test, Cognitive Complexity tells you how difficult your code will be to read and comprehend.

    A method's cognitive complexity is based on a few simple rules:

    • Code is not considered more complex when it uses shorthand that the language provides for collapsing multiple statements into one
    • Code is considered more complex for each "break in the linear flow of the code"
    • Code is considered more complex when "flow breaking structures are nested"

    Further reading

    Function ResourceDefinitions has a Cognitive Complexity of 15 (exceeds 5 allowed). Consider refactoring.
    Open

    const ResourceDefinitions = () => {
  const intl = useIntl();
  const [config, setConfig] = useState({
    pagination: {
      ...defaultSettings,
    Severity: Minor
    Found in src/smart-components/role/role-resource-definitions.js - About 1 hr to fix

    Cognitive Complexity

    Cognitive Complexity is a measure of how difficult a unit of code is to intuitively understand. Unlike Cyclomatic Complexity, which determines how difficult your code will be to test, Cognitive Complexity tells you how difficult your code will be to read and comprehend.

    A method's cognitive complexity is based on a few simple rules:

    • Code is not considered more complex when it uses shorthand that the language provides for collapsing multiple statements into one
    • Code is considered more complex for each "break in the linear flow of the code"
    • Code is considered more complex when "flow breaking structures are nested"

    Further reading

    Similar blocks of code found in 2 locations. Consider refactoring.
    Open

              {
            title: intl.formatMessage(messages.delete),
            onClick: (_event, _rowId, role) => {
              setRemoveRolesList([role]);
              navigate(mergeToBasename(paths['remove-role'].link.replace(':roleId', role.uuid)));
    Severity: Major
    Found in src/smart-components/role/roles.js and 1 other location - About 1 hr to fix
    src/smart-components/group/groups.js on lines 135..141

    Duplicated Code

    Duplicated code can lead to software that is hard to understand and difficult to change. The Don't Repeat Yourself (DRY) principle states:

    Every piece of knowledge must have a single, unambiguous, authoritative representation within a system.

    When you violate DRY, bugs and maintenance problems are sure to follow. Duplicated code has a tendency to both continue to replicate and also to diverge (leaving bugs as two similar implementations differ in subtle ways).

    Tuning

    This issue has a mass of 73.

    We set useful threshold defaults for the languages we support but you may want to adjust these settings based on your project guidelines.

    The threshold configuration represents the minimum mass a code block must have to be analyzed for duplication. The lower the threshold, the more fine-grained the comparison.

    If the engine is too easily reporting duplication, try raising the threshold. If you suspect that the engine isn't catching enough duplication, try lowering the threshold. The best setting tends to differ from language to language.

    See codeclimate-duplication's documentation for more information about tuning the mass threshold in your .codeclimate.yml.

    Refactorings

    Further Reading

    Similar blocks of code found in 2 locations. Consider refactoring.
    Open

              {
            title: intl.formatMessage(messages.delete),
            onClick: (_event, _rowId, group) => {
              setRemoveGroupsList([group]);
              navigate(mergeToBasename(pathnames['remove-group'].link.replace(':groupId', group.uuid)));
    Severity: Major
    Found in src/smart-components/group/groups.js and 1 other location - About 1 hr to fix
    src/smart-components/role/roles.js on lines 119..125

    Duplicated Code

    Duplicated code can lead to software that is hard to understand and difficult to change. The Don't Repeat Yourself (DRY) principle states:

    Every piece of knowledge must have a single, unambiguous, authoritative representation within a system.

    When you violate DRY, bugs and maintenance problems are sure to follow. Duplicated code has a tendency to both continue to replicate and also to diverge (leaving bugs as two similar implementations differ in subtle ways).

    Tuning

    This issue has a mass of 73.

    We set useful threshold defaults for the languages we support but you may want to adjust these settings based on your project guidelines.

    The threshold configuration represents the minimum mass a code block must have to be analyzed for duplication. The lower the threshold, the more fine-grained the comparison.

    If the engine is too easily reporting duplication, try raising the threshold. If you suspect that the engine isn't catching enough duplication, try lowering the threshold. The best setting tends to differ from language to language.

    See codeclimate-duplication's documentation for more information about tuning the mass threshold in your .codeclimate.yml.

    Refactorings

    Further Reading

    Similar blocks of code found in 2 locations. Consider refactoring.
    Open

          {
        uuid: '00000-11111-1111-1111-111111',
        name: 'Test_2_00000-00000',
        display_name: 'Test 2',
        description: 'Test role2',
    Severity: Major
    Found in cypress/e2e/roles.cy.ts and 1 other location - About 1 hr to fix
    cypress/e2e/roles.cy.ts on lines 4..19

    Duplicated Code

    Duplicated code can lead to software that is hard to understand and difficult to change. The Don't Repeat Yourself (DRY) principle states:

    Every piece of knowledge must have a single, unambiguous, authoritative representation within a system.

    When you violate DRY, bugs and maintenance problems are sure to follow. Duplicated code has a tendency to both continue to replicate and also to diverge (leaving bugs as two similar implementations differ in subtle ways).

    Tuning

    This issue has a mass of 73.

    We set useful threshold defaults for the languages we support but you may want to adjust these settings based on your project guidelines.

    The threshold configuration represents the minimum mass a code block must have to be analyzed for duplication. The lower the threshold, the more fine-grained the comparison.

    If the engine is too easily reporting duplication, try raising the threshold. If you suspect that the engine isn't catching enough duplication, try lowering the threshold. The best setting tends to differ from language to language.

    See codeclimate-duplication's documentation for more information about tuning the mass threshold in your .codeclimate.yml.

    Refactorings

    Further Reading

    Similar blocks of code found in 2 locations. Consider refactoring.
    Open

          {
        uuid: '00000-0000-0000-0000-00000000',
        name: 'Test_1_00000-00000',
        display_name: 'Test 1',
        description: 'Test role1',
    Severity: Major
    Found in cypress/e2e/roles.cy.ts and 1 other location - About 1 hr to fix
    cypress/e2e/roles.cy.ts on lines 20..35

    Duplicated Code

    Duplicated code can lead to software that is hard to understand and difficult to change. The Don't Repeat Yourself (DRY) principle states:

    Every piece of knowledge must have a single, unambiguous, authoritative representation within a system.

    When you violate DRY, bugs and maintenance problems are sure to follow. Duplicated code has a tendency to both continue to replicate and also to diverge (leaving bugs as two similar implementations differ in subtle ways).

    Tuning

    This issue has a mass of 73.

    We set useful threshold defaults for the languages we support but you may want to adjust these settings based on your project guidelines.

    The threshold configuration represents the minimum mass a code block must have to be analyzed for duplication. The lower the threshold, the more fine-grained the comparison.

    If the engine is too easily reporting duplication, try raising the threshold. If you suspect that the engine isn't catching enough duplication, try lowering the threshold. The best setting tends to differ from language to language.

    See codeclimate-duplication's documentation for more information about tuning the mass threshold in your .codeclimate.yml.

    Refactorings

    Further Reading

    Similar blocks of code found in 3 locations. Consider refactoring.
    Open

            rejected: {
          variant: 'danger',
          title: intl.formatMessage(messages.removeGroupServiceAccountsErrorTitle, { count: serviceAccountsIds.length }),
          dismissDelay: 8000,
          description: intl.formatMessage(messages.removeGroupServiceAccountsErrorDescription, { count: serviceAccountsIds.length }),
    Severity: Major
    Found in src/redux/actions/group-actions.js and 2 other locations - About 1 hr to fix
    src/redux/actions/group-actions.js on lines 213..218
    src/redux/actions/group-actions.js on lines 241..246

    Duplicated Code

    Duplicated code can lead to software that is hard to understand and difficult to change. The Don't Repeat Yourself (DRY) principle states:

    Every piece of knowledge must have a single, unambiguous, authoritative representation within a system.

    When you violate DRY, bugs and maintenance problems are sure to follow. Duplicated code has a tendency to both continue to replicate and also to diverge (leaving bugs as two similar implementations differ in subtle ways).

    Tuning

    This issue has a mass of 72.

    We set useful threshold defaults for the languages we support but you may want to adjust these settings based on your project guidelines.

    The threshold configuration represents the minimum mass a code block must have to be analyzed for duplication. The lower the threshold, the more fine-grained the comparison.

    If the engine is too easily reporting duplication, try raising the threshold. If you suspect that the engine isn't catching enough duplication, try lowering the threshold. The best setting tends to differ from language to language.

    See codeclimate-duplication's documentation for more information about tuning the mass threshold in your .codeclimate.yml.

    Refactorings

    Further Reading

    Similar blocks of code found in 3 locations. Consider refactoring.
    Open

            fulfilled: {
          variant: 'success',
          title: intl.formatMessage(messages.addGroupServiceAccountsSuccessTitle, { count: serviceAccounts.length }),
          dismissDelay: 8000,
          description: intl.formatMessage(messages.addGroupServiceAccountsSuccessDescription, { count: serviceAccounts.length }),
    Severity: Major
    Found in src/redux/actions/group-actions.js and 2 other locations - About 1 hr to fix
    src/redux/actions/group-actions.js on lines 241..246
    src/redux/actions/group-actions.js on lines 247..252

    Duplicated Code

    Duplicated code can lead to software that is hard to understand and difficult to change. The Don't Repeat Yourself (DRY) principle states:

    Every piece of knowledge must have a single, unambiguous, authoritative representation within a system.

    When you violate DRY, bugs and maintenance problems are sure to follow. Duplicated code has a tendency to both continue to replicate and also to diverge (leaving bugs as two similar implementations differ in subtle ways).

    Tuning

    This issue has a mass of 72.

    We set useful threshold defaults for the languages we support but you may want to adjust these settings based on your project guidelines.

    The threshold configuration represents the minimum mass a code block must have to be analyzed for duplication. The lower the threshold, the more fine-grained the comparison.

    If the engine is too easily reporting duplication, try raising the threshold. If you suspect that the engine isn't catching enough duplication, try lowering the threshold. The best setting tends to differ from language to language.

    See codeclimate-duplication's documentation for more information about tuning the mass threshold in your .codeclimate.yml.

    Refactorings

    Further Reading

    Similar blocks of code found in 3 locations. Consider refactoring.
    Open

            fulfilled: {
          variant: 'success',
          title: intl.formatMessage(messages.removeGroupServiceAccountsSuccessTitle, { count: serviceAccountsIds.length }),
          dismissDelay: 8000,
          description: intl.formatMessage(messages.removeGroupServiceAccountsSuccessDescription, { count: serviceAccountsIds.length }),
    Severity: Major
    Found in src/redux/actions/group-actions.js and 2 other locations - About 1 hr to fix
    src/redux/actions/group-actions.js on lines 213..218
    src/redux/actions/group-actions.js on lines 247..252

    Duplicated Code

    Duplicated code can lead to software that is hard to understand and difficult to change. The Don't Repeat Yourself (DRY) principle states:

    Every piece of knowledge must have a single, unambiguous, authoritative representation within a system.

    When you violate DRY, bugs and maintenance problems are sure to follow. Duplicated code has a tendency to both continue to replicate and also to diverge (leaving bugs as two similar implementations differ in subtle ways).

    Tuning

    This issue has a mass of 72.

    We set useful threshold defaults for the languages we support but you may want to adjust these settings based on your project guidelines.

    The threshold configuration represents the minimum mass a code block must have to be analyzed for duplication. The lower the threshold, the more fine-grained the comparison.

    If the engine is too easily reporting duplication, try raising the threshold. If you suspect that the engine isn't catching enough duplication, try lowering the threshold. The best setting tends to differ from language to language.

    See codeclimate-duplication's documentation for more information about tuning the mass threshold in your .codeclimate.yml.

    Refactorings

    Further Reading

    Similar blocks of code found in 2 locations. Consider refactoring.
    Open

    const setUsers = (state: UserStore, { payload }: any) => ({
  ...state,
  users: { pagination: state.users?.pagination, filters: state.users?.filters, ...payload },
  isUserDataLoading: false,
});
    Severity: Major
    Found in src/redux/reducers/user-reducer.ts and 1 other location - About 1 hr to fix
    src/redux/reducers/group-reducer.ts on lines 89..93

    Duplicated Code

    Duplicated code can lead to software that is hard to understand and difficult to change. The Don't Repeat Yourself (DRY) principle states:

    Every piece of knowledge must have a single, unambiguous, authoritative representation within a system.

    When you violate DRY, bugs and maintenance problems are sure to follow. Duplicated code has a tendency to both continue to replicate and also to diverge (leaving bugs as two similar implementations differ in subtle ways).

    Tuning

    This issue has a mass of 72.

    We set useful threshold defaults for the languages we support but you may want to adjust these settings based on your project guidelines.

    The threshold configuration represents the minimum mass a code block must have to be analyzed for duplication. The lower the threshold, the more fine-grained the comparison.

    If the engine is too easily reporting duplication, try raising the threshold. If you suspect that the engine isn't catching enough duplication, try lowering the threshold. The best setting tends to differ from language to language.

    See codeclimate-duplication's documentation for more information about tuning the mass threshold in your .codeclimate.yml.

    Refactorings

    Further Reading

    Similar blocks of code found in 2 locations. Consider refactoring.
    Open

    const setGroups = (state: GroupStore, { payload }: any) => ({
  ...state,
  groups: { pagination: state.groups?.pagination, filters: state.groups?.filters, ...payload },
  isLoading: false,
});
    Severity: Major
    Found in src/redux/reducers/group-reducer.ts and 1 other location - About 1 hr to fix
    src/redux/reducers/user-reducer.ts on lines 55..59

    Duplicated Code

    Duplicated code can lead to software that is hard to understand and difficult to change. The Don't Repeat Yourself (DRY) principle states:

    Every piece of knowledge must have a single, unambiguous, authoritative representation within a system.

    When you violate DRY, bugs and maintenance problems are sure to follow. Duplicated code has a tendency to both continue to replicate and also to diverge (leaving bugs as two similar implementations differ in subtle ways).

    Tuning

    This issue has a mass of 72.

    We set useful threshold defaults for the languages we support but you may want to adjust these settings based on your project guidelines.

    The threshold configuration represents the minimum mass a code block must have to be analyzed for duplication. The lower the threshold, the more fine-grained the comparison.

    If the engine is too easily reporting duplication, try raising the threshold. If you suspect that the engine isn't catching enough duplication, try lowering the threshold. The best setting tends to differ from language to language.

    See codeclimate-duplication's documentation for more information about tuning the mass threshold in your .codeclimate.yml.

    Refactorings

    Further Reading

    Similar blocks of code found in 2 locations. Consider refactoring.
    Open

      const setCheckedItems = (newSelection) => {
    setSelectedRoles((roles) => newSelection(roles).map(({ uuid, name, label }) => ({ uuid, label: label || name })));
  };
    Severity: Major
    Found in src/smart-components/group/add-group/roles-list.js and 1 other location - About 1 hr to fix
    src/smart-components/group/role/group-roles.js on lines 164..166

    Duplicated Code

    Duplicated code can lead to software that is hard to understand and difficult to change. The Don't Repeat Yourself (DRY) principle states:

    Every piece of knowledge must have a single, unambiguous, authoritative representation within a system.

    When you violate DRY, bugs and maintenance problems are sure to follow. Duplicated code has a tendency to both continue to replicate and also to diverge (leaving bugs as two similar implementations differ in subtle ways).

    Tuning

    This issue has a mass of 71.

    We set useful threshold defaults for the languages we support but you may want to adjust these settings based on your project guidelines.

    The threshold configuration represents the minimum mass a code block must have to be analyzed for duplication. The lower the threshold, the more fine-grained the comparison.

    If the engine is too easily reporting duplication, try raising the threshold. If you suspect that the engine isn't catching enough duplication, try lowering the threshold. The best setting tends to differ from language to language.

    See codeclimate-duplication's documentation for more information about tuning the mass threshold in your .codeclimate.yml.

    Refactorings

    Further Reading

    Severity
    Category
    Status
    Source
    Language