ServiceInnovationLab/RapuTure

HamlLint/SpaceBeforeScript

Separate Ruby script indicators (-/=) from their code with a single space.

Bad: no space between = and some_expression haml =some_expression

Good haml = some_expression

Good haml - some_value = 'Hello World'

Ensuring space after -/= enforces a consistency that all HAML tags/script indicators are separated from their inline content by a space. Since it is optional to add a space after -/= but required when writing %tag or similar, the consistency is best enforced via a linter.

HamlLint/SpaceBeforeScript

Separate Ruby script indicators (-/=) from their code with a single space.

Bad: no space between = and some_expression haml =some_expression

Good haml = some_expression

Good haml - some_value = 'Hello World'

Ensuring space after -/= enforces a consistency that all HAML tags/script indicators are separated from their inline content by a space. Since it is optional to add a space after -/= but required when writing %tag or similar, the consistency is best enforced via a linter.

HamlLint/SpaceInsideHashAttributes

Check the style of hash attributes against one of two possible preferred styles, space (default) or no_space:

Bad: inconsistent spacing inside hash attributes braces haml %tag{ foo: bar} %tag{foo: bar } %tag{ foo: bar }

With default space style option: require a single space inside hash attributes braces haml %tag{ foo: bar }

With no_space style option: require no space inside hash attributes braces haml %tag{foo: bar}

This offers the ability to ensure consistency of Haml hash attributes style with ruby hash literal style (compare with the Style/SpaceInsideHashLiteralBraces cop in Rubocop).

HamlLint/RuboCop

This linter integrates with RuboCop (a static code analyzer and style enforcer) to check the actual Ruby code in your templates. It will respect any RuboCop-specific configuration you have set in .rubocop.yml files, but will explicitly ignore some checks that don't make sense in the context of HAML documents (like Style/BlockAlignment).

-# example.haml
- name = 'James Brown'
- unused_variable = 42

%p Hello #{name}!

Output from haml-lint example.haml:3 [W] Useless assignment to variable - unused_variable

You can customize which RuboCop warnings you want to ignore by modifying the ignored_cops option (see config/default.yml for the full list of ignored cops).

You can also explicitly set which RuboCop configuration to use via the HAML_LINT_RUBOCOP_CONF environment variable. This is intended to be used by external tools which run the linter on files in temporary directories separate from the directory where the HAML template originally resided (and thus where the normal .rubocop.yml would be picked up).

Displaying Cop Names

You can display the name of the cop by adding the following to your .rubocop.yml configuration:

AllCops:
  DisplayCopNames: true

HamlLint/RuboCop

This linter integrates with RuboCop (a static code analyzer and style enforcer) to check the actual Ruby code in your templates. It will respect any RuboCop-specific configuration you have set in .rubocop.yml files, but will explicitly ignore some checks that don't make sense in the context of HAML documents (like Style/BlockAlignment).

-# example.haml
- name = 'James Brown'
- unused_variable = 42

%p Hello #{name}!

Output from haml-lint example.haml:3 [W] Useless assignment to variable - unused_variable

You can customize which RuboCop warnings you want to ignore by modifying the ignored_cops option (see config/default.yml for the full list of ignored cops).

You can also explicitly set which RuboCop configuration to use via the HAML_LINT_RUBOCOP_CONF environment variable. This is intended to be used by external tools which run the linter on files in temporary directories separate from the directory where the HAML template originally resided (and thus where the normal .rubocop.yml would be picked up).

Displaying Cop Names

You can display the name of the cop by adding the following to your .rubocop.yml configuration:

AllCops:
  DisplayCopNames: true

HamlLint/RuboCop

This linter integrates with RuboCop (a static code analyzer and style enforcer) to check the actual Ruby code in your templates. It will respect any RuboCop-specific configuration you have set in .rubocop.yml files, but will explicitly ignore some checks that don't make sense in the context of HAML documents (like Style/BlockAlignment).

-# example.haml
- name = 'James Brown'
- unused_variable = 42

%p Hello #{name}!

Output from haml-lint example.haml:3 [W] Useless assignment to variable - unused_variable

You can customize which RuboCop warnings you want to ignore by modifying the ignored_cops option (see config/default.yml for the full list of ignored cops).

You can also explicitly set which RuboCop configuration to use via the HAML_LINT_RUBOCOP_CONF environment variable. This is intended to be used by external tools which run the linter on files in temporary directories separate from the directory where the HAML template originally resided (and thus where the normal .rubocop.yml would be picked up).

Displaying Cop Names

You can display the name of the cop by adding the following to your .rubocop.yml configuration:

AllCops:
  DisplayCopNames: true

HamlLint/SpaceInsideHashAttributes

Check the style of hash attributes against one of two possible preferred styles, space (default) or no_space:

Bad: inconsistent spacing inside hash attributes braces haml %tag{ foo: bar} %tag{foo: bar } %tag{ foo: bar }

With default space style option: require a single space inside hash attributes braces haml %tag{ foo: bar }

With no_space style option: require no space inside hash attributes braces haml %tag{foo: bar}

This offers the ability to ensure consistency of Haml hash attributes style with ruby hash literal style (compare with the Style/SpaceInsideHashLiteralBraces cop in Rubocop).

HamlLint/RuboCop

This linter integrates with RuboCop (a static code analyzer and style enforcer) to check the actual Ruby code in your templates. It will respect any RuboCop-specific configuration you have set in .rubocop.yml files, but will explicitly ignore some checks that don't make sense in the context of HAML documents (like Style/BlockAlignment).

-# example.haml
- name = 'James Brown'
- unused_variable = 42

%p Hello #{name}!

Output from haml-lint example.haml:3 [W] Useless assignment to variable - unused_variable

You can customize which RuboCop warnings you want to ignore by modifying the ignored_cops option (see config/default.yml for the full list of ignored cops).

You can also explicitly set which RuboCop configuration to use via the HAML_LINT_RUBOCOP_CONF environment variable. This is intended to be used by external tools which run the linter on files in temporary directories separate from the directory where the HAML template originally resided (and thus where the normal .rubocop.yml would be picked up).

Displaying Cop Names

You can display the name of the cop by adding the following to your .rubocop.yml configuration:

AllCops:
  DisplayCopNames: true

HamlLint/RuboCop

This linter integrates with RuboCop (a static code analyzer and style enforcer) to check the actual Ruby code in your templates. It will respect any RuboCop-specific configuration you have set in .rubocop.yml files, but will explicitly ignore some checks that don't make sense in the context of HAML documents (like Style/BlockAlignment).

-# example.haml
- name = 'James Brown'
- unused_variable = 42

%p Hello #{name}!

Output from haml-lint example.haml:3 [W] Useless assignment to variable - unused_variable

You can customize which RuboCop warnings you want to ignore by modifying the ignored_cops option (see config/default.yml for the full list of ignored cops).

You can also explicitly set which RuboCop configuration to use via the HAML_LINT_RUBOCOP_CONF environment variable. This is intended to be used by external tools which run the linter on files in temporary directories separate from the directory where the HAML template originally resided (and thus where the normal .rubocop.yml would be picked up).

Displaying Cop Names

You can display the name of the cop by adding the following to your .rubocop.yml configuration:

AllCops:
  DisplayCopNames: true

HamlLint/SpaceInsideHashAttributes

Check the style of hash attributes against one of two possible preferred styles, space (default) or no_space:

Bad: inconsistent spacing inside hash attributes braces haml %tag{ foo: bar} %tag{foo: bar } %tag{ foo: bar }

With default space style option: require a single space inside hash attributes braces haml %tag{ foo: bar }

With no_space style option: require no space inside hash attributes braces haml %tag{foo: bar}

This offers the ability to ensure consistency of Haml hash attributes style with ruby hash literal style (compare with the Style/SpaceInsideHashLiteralBraces cop in Rubocop).

HamlLint/LineLength

Wrap lines at 80 characters. You can configure this amount via the max option on the linter, e.g. by adding the following to your .haml-lint.yml:

linters:
  LineLength:
    max: 100

Long lines are harder to read and usually indicative of complexity. You can avoid them by splitting long attribute hashes on a comma, for example:

%tag{ attr1: 1,
      attr2: 2,
      attr3: 3 }

This significantly improves readability.

HamlLint/InstanceVariables

Checks that instance variables are not used in the specified type of files.

By default, this linter only runs on Rails-style partial views, e.g. files that have a base name starting with a leading underscore _. If you want to ensure that you don't use any instance variables at all, you can set file_types to all.

You can also define your own matchers if you want to enable this linter on a different subset of your views. For instance, if you want to lint only files starting with special_, you can define the configuration as follows:

InstanceVariables:
  enabled: true
  file_types: special
  matchers:
    special: ^special_.*\.haml$

To avoid using instance variables in partials, ensure you are passing any needed variables as local variables. Alternatively, you can use only helper methods to place data in your views.

HamlLint/SpaceInsideHashAttributes

Check the style of hash attributes against one of two possible preferred styles, space (default) or no_space:

Bad: inconsistent spacing inside hash attributes braces haml %tag{ foo: bar} %tag{foo: bar } %tag{ foo: bar }

With default space style option: require a single space inside hash attributes braces haml %tag{ foo: bar }

With no_space style option: require no space inside hash attributes braces haml %tag{foo: bar}

This offers the ability to ensure consistency of Haml hash attributes style with ruby hash literal style (compare with the Style/SpaceInsideHashLiteralBraces cop in Rubocop).

HamlLint/RuboCop

This linter integrates with RuboCop (a static code analyzer and style enforcer) to check the actual Ruby code in your templates. It will respect any RuboCop-specific configuration you have set in .rubocop.yml files, but will explicitly ignore some checks that don't make sense in the context of HAML documents (like Style/BlockAlignment).

-# example.haml
- name = 'James Brown'
- unused_variable = 42

%p Hello #{name}!

Output from haml-lint example.haml:3 [W] Useless assignment to variable - unused_variable

You can customize which RuboCop warnings you want to ignore by modifying the ignored_cops option (see config/default.yml for the full list of ignored cops).

You can also explicitly set which RuboCop configuration to use via the HAML_LINT_RUBOCOP_CONF environment variable. This is intended to be used by external tools which run the linter on files in temporary directories separate from the directory where the HAML template originally resided (and thus where the normal .rubocop.yml would be picked up).

Displaying Cop Names

You can display the name of the cop by adding the following to your .rubocop.yml configuration:

AllCops:
  DisplayCopNames: true

HamlLint/RuboCop

This linter integrates with RuboCop (a static code analyzer and style enforcer) to check the actual Ruby code in your templates. It will respect any RuboCop-specific configuration you have set in .rubocop.yml files, but will explicitly ignore some checks that don't make sense in the context of HAML documents (like Style/BlockAlignment).

-# example.haml
- name = 'James Brown'
- unused_variable = 42

%p Hello #{name}!

Output from haml-lint example.haml:3 [W] Useless assignment to variable - unused_variable

You can customize which RuboCop warnings you want to ignore by modifying the ignored_cops option (see config/default.yml for the full list of ignored cops).

You can also explicitly set which RuboCop configuration to use via the HAML_LINT_RUBOCOP_CONF environment variable. This is intended to be used by external tools which run the linter on files in temporary directories separate from the directory where the HAML template originally resided (and thus where the normal .rubocop.yml would be picked up).

Displaying Cop Names

You can display the name of the cop by adding the following to your .rubocop.yml configuration:

AllCops:
  DisplayCopNames: true

HamlLint/RuboCop

This linter integrates with RuboCop (a static code analyzer and style enforcer) to check the actual Ruby code in your templates. It will respect any RuboCop-specific configuration you have set in .rubocop.yml files, but will explicitly ignore some checks that don't make sense in the context of HAML documents (like Style/BlockAlignment).

-# example.haml
- name = 'James Brown'
- unused_variable = 42

%p Hello #{name}!

Output from haml-lint example.haml:3 [W] Useless assignment to variable - unused_variable

You can customize which RuboCop warnings you want to ignore by modifying the ignored_cops option (see config/default.yml for the full list of ignored cops).

You can also explicitly set which RuboCop configuration to use via the HAML_LINT_RUBOCOP_CONF environment variable. This is intended to be used by external tools which run the linter on files in temporary directories separate from the directory where the HAML template originally resided (and thus where the normal .rubocop.yml would be picked up).

Displaying Cop Names

You can display the name of the cop by adding the following to your .rubocop.yml configuration:

AllCops:
  DisplayCopNames: true

HamlLint/SpaceInsideHashAttributes

Check the style of hash attributes against one of two possible preferred styles, space (default) or no_space:

Bad: inconsistent spacing inside hash attributes braces haml %tag{ foo: bar} %tag{foo: bar } %tag{ foo: bar }

With default space style option: require a single space inside hash attributes braces haml %tag{ foo: bar }

With no_space style option: require no space inside hash attributes braces haml %tag{foo: bar}

This offers the ability to ensure consistency of Haml hash attributes style with ruby hash literal style (compare with the Style/SpaceInsideHashLiteralBraces cop in Rubocop).

HamlLint/RuboCop

This linter integrates with RuboCop (a static code analyzer and style enforcer) to check the actual Ruby code in your templates. It will respect any RuboCop-specific configuration you have set in .rubocop.yml files, but will explicitly ignore some checks that don't make sense in the context of HAML documents (like Style/BlockAlignment).

-# example.haml
- name = 'James Brown'
- unused_variable = 42

%p Hello #{name}!

Output from haml-lint example.haml:3 [W] Useless assignment to variable - unused_variable

You can customize which RuboCop warnings you want to ignore by modifying the ignored_cops option (see config/default.yml for the full list of ignored cops).

You can also explicitly set which RuboCop configuration to use via the HAML_LINT_RUBOCOP_CONF environment variable. This is intended to be used by external tools which run the linter on files in temporary directories separate from the directory where the HAML template originally resided (and thus where the normal .rubocop.yml would be picked up).

Displaying Cop Names

You can display the name of the cop by adding the following to your .rubocop.yml configuration:

AllCops:
  DisplayCopNames: true

HamlLint/SpaceBeforeScript

Separate Ruby script indicators (-/=) from their code with a single space.

Bad: no space between = and some_expression haml =some_expression

Good haml = some_expression

Good haml - some_value = 'Hello World'

Ensuring space after -/= enforces a consistency that all HAML tags/script indicators are separated from their inline content by a space. Since it is optional to add a space after -/= but required when writing %tag or similar, the consistency is best enforced via a linter.

HamlLint/RuboCop

This linter integrates with RuboCop (a static code analyzer and style enforcer) to check the actual Ruby code in your templates. It will respect any RuboCop-specific configuration you have set in .rubocop.yml files, but will explicitly ignore some checks that don't make sense in the context of HAML documents (like Style/BlockAlignment).

-# example.haml
- name = 'James Brown'
- unused_variable = 42

%p Hello #{name}!

Output from haml-lint example.haml:3 [W] Useless assignment to variable - unused_variable

You can customize which RuboCop warnings you want to ignore by modifying the ignored_cops option (see config/default.yml for the full list of ignored cops).

You can also explicitly set which RuboCop configuration to use via the HAML_LINT_RUBOCOP_CONF environment variable. This is intended to be used by external tools which run the linter on files in temporary directories separate from the directory where the HAML template originally resided (and thus where the normal .rubocop.yml would be picked up).

Displaying Cop Names

You can display the name of the cop by adding the following to your .rubocop.yml configuration:

AllCops:
  DisplayCopNames: true