Method passesFilter
has a Cognitive Complexity of 50 (exceeds 5 allowed). Consider refactoring. Open
public static boolean passesFilter(final String literatureString, final Integer literatureID, final KnimeTuple tuple, final int level) throws PmmException {
if (literatureString == null || literatureString.trim().isEmpty()) return true;
PmmXmlDoc litXmlDoc = tuple.getPmmXml(level == 1 ? Model1Schema.ATT_EMLIT : Model2Schema.ATT_EMLIT);
for (PmmXmlElementConvertable el : litXmlDoc.getElementSet()) {
if (el instanceof LiteratureItem) {
- Read upRead up
- Create a ticketCreate a ticket
Cognitive Complexity
Cognitive Complexity is a measure of how difficult a unit of code is to intuitively understand. Unlike Cyclomatic Complexity, which determines how difficult your code will be to test, Cognitive Complexity tells you how difficult your code will be to read and comprehend.
A method's cognitive complexity is based on a few simple rules:
- Code is not considered more complex when it uses shorthand that the language provides for collapsing multiple statements into one
- Code is considered more complex for each "break in the linear flow of the code"
- Code is considered more complex when "flow breaking structures are nested"
Further reading
File ModelReaderUi.java
has 337 lines of code (exceeds 250 allowed). Consider refactoring. Open
/*******************************************************************************
* Copyright (c) 2015 Federal Institute for Risk Assessment (BfR), Germany
*
* This program is free software: you can redistribute it and/or modify
* it under the terms of the GNU General Public License as published by
- Create a ticketCreate a ticket
ModelReaderUi
has 24 methods (exceeds 20 allowed). Consider refactoring. Open
public class ModelReaderUi extends JPanel implements ActionListener {
private static final long serialVersionUID = 20120828;
public static final String PARAM_LEVEL = "level";
- Create a ticketCreate a ticket
Method complies
has a Cognitive Complexity of 15 (exceeds 5 allowed). Consider refactoring. Open
public boolean complies(KnimeTuple tuple) throws PmmException {
if (isModelFilterEnabled()) {
PmmXmlDoc x = tuple.getPmmXml(Model1Schema.getAttribute(Model1Schema.ATT_MODELCATALOG, tuple.getSchema().conforms(new Model1Schema()) ? 1 : 2));
if (x != null) {
- Read upRead up
- Create a ticketCreate a ticket
Cognitive Complexity
Cognitive Complexity is a measure of how difficult a unit of code is to intuitively understand. Unlike Cyclomatic Complexity, which determines how difficult your code will be to test, Cognitive Complexity tells you how difficult your code will be to read and comprehend.
A method's cognitive complexity is based on a few simple rules:
- Code is not considered more complex when it uses shorthand that the language provides for collapsing multiple statements into one
- Code is considered more complex for each "break in the linear flow of the code"
- Code is considered more complex when "flow breaking structures are nested"
Further reading
Method getModelList
has a Cognitive Complexity of 13 (exceeds 5 allowed). Consider refactoring. Open
public int[] getModelList() {
HashSet<Integer> ret = new HashSet<>();
for (Integer key : modelBoxSetPrim.keySet()) {
if (modelBoxSetPrim.containsKey(key)) {
- Read upRead up
- Create a ticketCreate a ticket
Cognitive Complexity
Cognitive Complexity is a measure of how difficult a unit of code is to intuitively understand. Unlike Cyclomatic Complexity, which determines how difficult your code will be to test, Cognitive Complexity tells you how difficult your code will be to read and comprehend.
A method's cognitive complexity is based on a few simple rules:
- Code is not considered more complex when it uses shorthand that the language provides for collapsing multiple statements into one
- Code is considered more complex for each "break in the linear flow of the code"
- Code is considered more complex when "flow breaking structures are nested"
Further reading
Method passesFilter
has 36 lines of code (exceeds 25 allowed). Consider refactoring. Open
public static boolean passesFilter(final String literatureString, final Integer literatureID, final KnimeTuple tuple, final int level) throws PmmException {
if (literatureString == null || literatureString.trim().isEmpty()) return true;
PmmXmlDoc litXmlDoc = tuple.getPmmXml(level == 1 ? Model1Schema.ATT_EMLIT : Model2Schema.ATT_EMLIT);
for (PmmXmlElementConvertable el : litXmlDoc.getElementSet()) {
if (el instanceof LiteratureItem) {
- Create a ticketCreate a ticket
Method modelNameEnabled
has a Cognitive Complexity of 12 (exceeds 5 allowed). Consider refactoring. Open
private boolean modelNameEnabled(final String name) {
for (JCheckBox box : modelBoxSetPrim.values()) {
if (box.getText().equals(name)) return true;
if (box.getText().startsWith(name) && box.getText().lastIndexOf(" (") == name.length()) return true;
}
- Read upRead up
- Create a ticketCreate a ticket
Cognitive Complexity
Cognitive Complexity is a measure of how difficult a unit of code is to intuitively understand. Unlike Cyclomatic Complexity, which determines how difficult your code will be to test, Cognitive Complexity tells you how difficult your code will be to read and comprehend.
A method's cognitive complexity is based on a few simple rules:
- Code is not considered more complex when it uses shorthand that the language provides for collapsing multiple statements into one
- Code is considered more complex for each "break in the linear flow of the code"
- Code is considered more complex when "flow breaking structures are nested"
Further reading
Method passesFilter
has a Cognitive Complexity of 11 (exceeds 5 allowed). Consider refactoring. Open
public static boolean passesFilter(final int[] modelList, final KnimeTuple tuple, final int level) throws PmmException {
if (modelList == null || modelList.length == 0)
return false;
- Read upRead up
- Create a ticketCreate a ticket
Cognitive Complexity
Cognitive Complexity is a measure of how difficult a unit of code is to intuitively understand. Unlike Cyclomatic Complexity, which determines how difficult your code will be to test, Cognitive Complexity tells you how difficult your code will be to read and comprehend.
A method's cognitive complexity is based on a few simple rules:
- Code is not considered more complex when it uses shorthand that the language provides for collapsing multiple statements into one
- Code is considered more complex for each "break in the linear flow of the code"
- Code is considered more complex when "flow breaking structures are nested"
Further reading
Method updateModelNameEnabled
has a Cognitive Complexity of 10 (exceeds 5 allowed). Consider refactoring. Open
private void updateModelNameEnabled() {
if (modelNameSwitch.isSelected()) {
for (JCheckBox box : modelBoxSetPrim.values()) box.setEnabled(true);
for (JCheckBox box : modelBoxSetSec.values()) box.setEnabled(true);
} else {
- Read upRead up
- Create a ticketCreate a ticket
Cognitive Complexity
Cognitive Complexity is a measure of how difficult a unit of code is to intuitively understand. Unlike Cyclomatic Complexity, which determines how difficult your code will be to test, Cognitive Complexity tells you how difficult your code will be to read and comprehend.
A method's cognitive complexity is based on a few simple rules:
- Code is not considered more complex when it uses shorthand that the language provides for collapsing multiple statements into one
- Code is considered more complex for each "break in the linear flow of the code"
- Code is considered more complex when "flow breaking structures are nested"
Further reading
Method enableModelList
has a Cognitive Complexity of 9 (exceeds 5 allowed). Consider refactoring. Open
public void enableModelList(final int[] idlist) {
if (idlist == null || idlist.length == 0) return;
// disable everything
for (JCheckBox box : modelBoxSetPrim.values()) {
box.setSelected(false);
- Read upRead up
- Create a ticketCreate a ticket
Cognitive Complexity
Cognitive Complexity is a measure of how difficult a unit of code is to intuitively understand. Unlike Cyclomatic Complexity, which determines how difficult your code will be to test, Cognitive Complexity tells you how difficult your code will be to read and comprehend.
A method's cognitive complexity is based on a few simple rules:
- Code is not considered more complex when it uses shorthand that the language provides for collapsing multiple statements into one
- Code is considered more complex for each "break in the linear flow of the code"
- Code is considered more complex when "flow breaking structures are nested"
Further reading
Method setSettings
has a Cognitive Complexity of 8 (exceeds 5 allowed). Consider refactoring. Open
public void setSettings(Config c) throws InvalidSettingsException {
setLevel(c.getInt(ModelReaderUi.PARAM_LEVEL, 1));
setModelClass(c.getString(ModelReaderUi.PARAM_MODELCLASS));
setModelFilterEnabled(c.getBoolean( ModelReaderUi.PARAM_MODELFILTERENABLED ));
if (c.containsKey(PARAM_MODELLISTINT)) enableModelList(c.getIntArray(ModelReaderUi.PARAM_MODELLISTINT));
- Read upRead up
- Create a ticketCreate a ticket
Cognitive Complexity
Cognitive Complexity is a measure of how difficult a unit of code is to intuitively understand. Unlike Cyclomatic Complexity, which determines how difficult your code will be to test, Cognitive Complexity tells you how difficult your code will be to read and comprehend.
A method's cognitive complexity is based on a few simple rules:
- Code is not considered more complex when it uses shorthand that the language provides for collapsing multiple statements into one
- Code is considered more complex for each "break in the linear flow of the code"
- Code is considered more complex when "flow breaking structures are nested"
Further reading
Avoid deeply nested control flow statements. Open
if (modelNameEnabled(cmx.name)) return true;
- Create a ticketCreate a ticket
Avoid too many return
statements within this method. Open
return false;
- Create a ticketCreate a ticket
Avoid too many return
statements within this method. Open
return false;
- Create a ticketCreate a ticket
Avoid too many return
statements within this method. Open
if (literatureID == id) return true;
- Create a ticketCreate a ticket
Refactor this method to reduce its Cognitive Complexity from 18 to the 15 allowed. Open
public boolean complies(KnimeTuple tuple) throws PmmException {
- Read upRead up
- Create a ticketCreate a ticket
- Exclude checks
Cognitive Complexity is a measure of how hard the control flow of a method is to understand. Methods with high Cognitive Complexity will be difficult to maintain.
See
Refactor this method to reduce its Cognitive Complexity from 56 to the 15 allowed. Open
public static boolean passesFilter(final String literatureString, final Integer literatureID, final KnimeTuple tuple, final int level) throws PmmException {
- Read upRead up
- Create a ticketCreate a ticket
- Exclude checks
Cognitive Complexity is a measure of how hard the control flow of a method is to understand. Methods with high Cognitive Complexity will be difficult to maintain.
See
Identical blocks of code found in 3 locations. Consider refactoring. Open
for (PmmXmlElementConvertable el : litXmlDoc.getElementSet()) {
if (el instanceof LiteratureItem) {
LiteratureItem lit = (LiteratureItem) el;
if (literatureID > 0) {
int id = lit.id;
- Read upRead up
- Create a ticketCreate a ticket
Duplicated Code
Duplicated code can lead to software that is hard to understand and difficult to change. The Don't Repeat Yourself (DRY) principle states:
Every piece of knowledge must have a single, unambiguous, authoritative representation within a system.
When you violate DRY, bugs and maintenance problems are sure to follow. Duplicated code has a tendency to both continue to replicate and also to diverge (leaving bugs as two similar implementations differ in subtle ways).
Tuning
This issue has a mass of 160.
We set useful threshold defaults for the languages we support but you may want to adjust these settings based on your project guidelines.
The threshold configuration represents the minimum mass a code block must have to be analyzed for duplication. The lower the threshold, the more fine-grained the comparison.
If the engine is too easily reporting duplication, try raising the threshold. If you suspect that the engine isn't catching enough duplication, try lowering the threshold. The best setting tends to differ from language to language.
See codeclimate-duplication
's documentation for more information about tuning the mass threshold in your .codeclimate.yml
.
Refactorings
- Extract Method
- Extract Class
- Form Template Method
- Introduce Null Object
- Pull Up Method
- Pull Up Field
- Substitute Algorithm
Further Reading
- Don't Repeat Yourself on the C2 Wiki
- Duplicated Code on SourceMaking
- Refactoring: Improving the Design of Existing Code by Martin Fowler. Duplicated Code, p76
Identical blocks of code found in 3 locations. Consider refactoring. Open
for (PmmXmlElementConvertable el : litXmlDoc.getElementSet()) {
if (el instanceof LiteratureItem) {
LiteratureItem lit = (LiteratureItem) el;
if (literatureID > 0) {
int id = lit.id;
- Read upRead up
- Create a ticketCreate a ticket
Duplicated Code
Duplicated code can lead to software that is hard to understand and difficult to change. The Don't Repeat Yourself (DRY) principle states:
Every piece of knowledge must have a single, unambiguous, authoritative representation within a system.
When you violate DRY, bugs and maintenance problems are sure to follow. Duplicated code has a tendency to both continue to replicate and also to diverge (leaving bugs as two similar implementations differ in subtle ways).
Tuning
This issue has a mass of 160.
We set useful threshold defaults for the languages we support but you may want to adjust these settings based on your project guidelines.
The threshold configuration represents the minimum mass a code block must have to be analyzed for duplication. The lower the threshold, the more fine-grained the comparison.
If the engine is too easily reporting duplication, try raising the threshold. If you suspect that the engine isn't catching enough duplication, try lowering the threshold. The best setting tends to differ from language to language.
See codeclimate-duplication
's documentation for more information about tuning the mass threshold in your .codeclimate.yml
.
Refactorings
- Extract Method
- Extract Class
- Form Template Method
- Introduce Null Object
- Pull Up Method
- Pull Up Field
- Substitute Algorithm
Further Reading
- Don't Repeat Yourself on the C2 Wiki
- Duplicated Code on SourceMaking
- Refactoring: Improving the Design of Existing Code by Martin Fowler. Duplicated Code, p76
Similar blocks of code found in 2 locations. Consider refactoring. Open
public void addModelSec(final int id, final String name, final String modelType, boolean visible) throws PmmException {
if (visible) {
if (name == null) throw new PmmException("Model name must not be null.");
//modelIdSec.put(name + " (" + modelType + ")", id);
- Read upRead up
- Create a ticketCreate a ticket
Duplicated Code
Duplicated code can lead to software that is hard to understand and difficult to change. The Don't Repeat Yourself (DRY) principle states:
Every piece of knowledge must have a single, unambiguous, authoritative representation within a system.
When you violate DRY, bugs and maintenance problems are sure to follow. Duplicated code has a tendency to both continue to replicate and also to diverge (leaving bugs as two similar implementations differ in subtle ways).
Tuning
This issue has a mass of 65.
We set useful threshold defaults for the languages we support but you may want to adjust these settings based on your project guidelines.
The threshold configuration represents the minimum mass a code block must have to be analyzed for duplication. The lower the threshold, the more fine-grained the comparison.
If the engine is too easily reporting duplication, try raising the threshold. If you suspect that the engine isn't catching enough duplication, try lowering the threshold. The best setting tends to differ from language to language.
See codeclimate-duplication
's documentation for more information about tuning the mass threshold in your .codeclimate.yml
.
Refactorings
- Extract Method
- Extract Class
- Form Template Method
- Introduce Null Object
- Pull Up Method
- Pull Up Field
- Substitute Algorithm
Further Reading
- Don't Repeat Yourself on the C2 Wiki
- Duplicated Code on SourceMaking
- Refactoring: Improving the Design of Existing Code by Martin Fowler. Duplicated Code, p76
Similar blocks of code found in 2 locations. Consider refactoring. Open
public void addModelPrim(final int id, final String name, final String modelType, boolean visible) throws PmmException {
if (visible) {
if (name == null) throw new PmmException("Model name must not be null.");
//modelIdPrim.put(name + " (" + modelType + ")", id);
- Read upRead up
- Create a ticketCreate a ticket
Duplicated Code
Duplicated code can lead to software that is hard to understand and difficult to change. The Don't Repeat Yourself (DRY) principle states:
Every piece of knowledge must have a single, unambiguous, authoritative representation within a system.
When you violate DRY, bugs and maintenance problems are sure to follow. Duplicated code has a tendency to both continue to replicate and also to diverge (leaving bugs as two similar implementations differ in subtle ways).
Tuning
This issue has a mass of 65.
We set useful threshold defaults for the languages we support but you may want to adjust these settings based on your project guidelines.
The threshold configuration represents the minimum mass a code block must have to be analyzed for duplication. The lower the threshold, the more fine-grained the comparison.
If the engine is too easily reporting duplication, try raising the threshold. If you suspect that the engine isn't catching enough duplication, try lowering the threshold. The best setting tends to differ from language to language.
See codeclimate-duplication
's documentation for more information about tuning the mass threshold in your .codeclimate.yml
.
Refactorings
- Extract Method
- Extract Class
- Form Template Method
- Introduce Null Object
- Pull Up Method
- Pull Up Field
- Substitute Algorithm
Further Reading
- Don't Repeat Yourself on the C2 Wiki
- Duplicated Code on SourceMaking
- Refactoring: Improving the Design of Existing Code by Martin Fowler. Duplicated Code, p76
Identical blocks of code found in 2 locations. Consider refactoring. Open
for (JCheckBox box : modelBoxSetPrim.values()) {
if (box.getText().equals(name)) return true;
if (box.getText().startsWith(name) && box.getText().lastIndexOf(" (") == name.length()) return true;
}
- Read upRead up
- Create a ticketCreate a ticket
Duplicated Code
Duplicated code can lead to software that is hard to understand and difficult to change. The Don't Repeat Yourself (DRY) principle states:
Every piece of knowledge must have a single, unambiguous, authoritative representation within a system.
When you violate DRY, bugs and maintenance problems are sure to follow. Duplicated code has a tendency to both continue to replicate and also to diverge (leaving bugs as two similar implementations differ in subtle ways).
Tuning
This issue has a mass of 56.
We set useful threshold defaults for the languages we support but you may want to adjust these settings based on your project guidelines.
The threshold configuration represents the minimum mass a code block must have to be analyzed for duplication. The lower the threshold, the more fine-grained the comparison.
If the engine is too easily reporting duplication, try raising the threshold. If you suspect that the engine isn't catching enough duplication, try lowering the threshold. The best setting tends to differ from language to language.
See codeclimate-duplication
's documentation for more information about tuning the mass threshold in your .codeclimate.yml
.
Refactorings
- Extract Method
- Extract Class
- Form Template Method
- Introduce Null Object
- Pull Up Method
- Pull Up Field
- Substitute Algorithm
Further Reading
- Don't Repeat Yourself on the C2 Wiki
- Duplicated Code on SourceMaking
- Refactoring: Improving the Design of Existing Code by Martin Fowler. Duplicated Code, p76
Identical blocks of code found in 2 locations. Consider refactoring. Open
for (JCheckBox box : modelBoxSetSec.values()) {
if (box.getText().equals(name)) return true;
if (box.getText().startsWith(name) && box.getText().lastIndexOf(" (") == name.length()) return true;
}
- Read upRead up
- Create a ticketCreate a ticket
Duplicated Code
Duplicated code can lead to software that is hard to understand and difficult to change. The Don't Repeat Yourself (DRY) principle states:
Every piece of knowledge must have a single, unambiguous, authoritative representation within a system.
When you violate DRY, bugs and maintenance problems are sure to follow. Duplicated code has a tendency to both continue to replicate and also to diverge (leaving bugs as two similar implementations differ in subtle ways).
Tuning
This issue has a mass of 56.
We set useful threshold defaults for the languages we support but you may want to adjust these settings based on your project guidelines.
The threshold configuration represents the minimum mass a code block must have to be analyzed for duplication. The lower the threshold, the more fine-grained the comparison.
If the engine is too easily reporting duplication, try raising the threshold. If you suspect that the engine isn't catching enough duplication, try lowering the threshold. The best setting tends to differ from language to language.
See codeclimate-duplication
's documentation for more information about tuning the mass threshold in your .codeclimate.yml
.
Refactorings
- Extract Method
- Extract Class
- Form Template Method
- Introduce Null Object
- Pull Up Method
- Pull Up Field
- Substitute Algorithm
Further Reading
- Don't Repeat Yourself on the C2 Wiki
- Duplicated Code on SourceMaking
- Refactoring: Improving the Design of Existing Code by Martin Fowler. Duplicated Code, p76
Identical blocks of code found in 2 locations. Consider refactoring. Open
for (Integer key : modelBoxSetPrim.keySet()) {
if (modelBoxSetPrim.containsKey(key)) {
JCheckBox box = modelBoxSetPrim.get(key);
if (box.isSelected()) {
ret.add(key);
- Read upRead up
- Create a ticketCreate a ticket
Duplicated Code
Duplicated code can lead to software that is hard to understand and difficult to change. The Don't Repeat Yourself (DRY) principle states:
Every piece of knowledge must have a single, unambiguous, authoritative representation within a system.
When you violate DRY, bugs and maintenance problems are sure to follow. Duplicated code has a tendency to both continue to replicate and also to diverge (leaving bugs as two similar implementations differ in subtle ways).
Tuning
This issue has a mass of 50.
We set useful threshold defaults for the languages we support but you may want to adjust these settings based on your project guidelines.
The threshold configuration represents the minimum mass a code block must have to be analyzed for duplication. The lower the threshold, the more fine-grained the comparison.
If the engine is too easily reporting duplication, try raising the threshold. If you suspect that the engine isn't catching enough duplication, try lowering the threshold. The best setting tends to differ from language to language.
See codeclimate-duplication
's documentation for more information about tuning the mass threshold in your .codeclimate.yml
.
Refactorings
- Extract Method
- Extract Class
- Form Template Method
- Introduce Null Object
- Pull Up Method
- Pull Up Field
- Substitute Algorithm
Further Reading
- Don't Repeat Yourself on the C2 Wiki
- Duplicated Code on SourceMaking
- Refactoring: Improving the Design of Existing Code by Martin Fowler. Duplicated Code, p76
Identical blocks of code found in 2 locations. Consider refactoring. Open
for (Integer key : modelBoxSetSec.keySet()) {
if (modelBoxSetSec.containsKey(key)) {
JCheckBox box = modelBoxSetSec.get(key);
if (box.isSelected()) {
ret.add(key);
- Read upRead up
- Create a ticketCreate a ticket
Duplicated Code
Duplicated code can lead to software that is hard to understand and difficult to change. The Don't Repeat Yourself (DRY) principle states:
Every piece of knowledge must have a single, unambiguous, authoritative representation within a system.
When you violate DRY, bugs and maintenance problems are sure to follow. Duplicated code has a tendency to both continue to replicate and also to diverge (leaving bugs as two similar implementations differ in subtle ways).
Tuning
This issue has a mass of 50.
We set useful threshold defaults for the languages we support but you may want to adjust these settings based on your project guidelines.
The threshold configuration represents the minimum mass a code block must have to be analyzed for duplication. The lower the threshold, the more fine-grained the comparison.
If the engine is too easily reporting duplication, try raising the threshold. If you suspect that the engine isn't catching enough duplication, try lowering the threshold. The best setting tends to differ from language to language.
See codeclimate-duplication
's documentation for more information about tuning the mass threshold in your .codeclimate.yml
.
Refactorings
- Extract Method
- Extract Class
- Form Template Method
- Introduce Null Object
- Pull Up Method
- Pull Up Field
- Substitute Algorithm
Further Reading
- Don't Repeat Yourself on the C2 Wiki
- Duplicated Code on SourceMaking
- Refactoring: Improving the Design of Existing Code by Martin Fowler. Duplicated Code, p76