Sign upLogin

SiLeBAT/FSK-Lab

View on GitHub
Star

Showing 14,752 of 14,752 total issues

Similar blocks of code found in 2 locations. Consider refactoring.
Open

            while (dowCnt < this.o.weekStart + 7){
                html += '<th class="dow';
        if ($.inArray(dowCnt, this.o.daysOfWeekDisabled) > -1)
          html += ' disabled';
        html += '">'+dates[this.o.language].daysMin[(dowCnt++)%7]+'</th>';
Severity: Major
Found in de.bund.bfr.knime.fsklab.deprecatednodes/js-src/bootstrap-datepicker/1_6_4/debug/js/bootstrap-datepicker.js and 1 other location - About 3 hrs to fix
de.bund.bfr.knime.js/src/js/lib/bootstrap-datepicker.js on lines 822..827

Duplicated Code

Duplicated code can lead to software that is hard to understand and difficult to change. The Don't Repeat Yourself (DRY) principle states:

Every piece of knowledge must have a single, unambiguous, authoritative representation within a system.

When you violate DRY, bugs and maintenance problems are sure to follow. Duplicated code has a tendency to both continue to replicate and also to diverge (leaving bugs as two similar implementations differ in subtle ways).

Tuning

This issue has a mass of 105.

We set useful threshold defaults for the languages we support but you may want to adjust these settings based on your project guidelines.

The threshold configuration represents the minimum mass a code block must have to be analyzed for duplication. The lower the threshold, the more fine-grained the comparison.

If the engine is too easily reporting duplication, try raising the threshold. If you suspect that the engine isn't catching enough duplication, try lowering the threshold. The best setting tends to differ from language to language.

See codeclimate-duplication's documentation for more information about tuning the mass threshold in your .codeclimate.yml.

Refactorings

Further Reading

Similar blocks of code found in 2 locations. Consider refactoring.
Open

    if (!condition) {
      for (var _len2 = arguments.length, args = Array(_len2 > 2 ? _len2 - 2 : 0), _key2 = 2; _key2 < _len2; _key2++) {
        args[_key2 - 2] = arguments[_key2];
      }
Severity: Major
Found in de.bund.bfr.knime.fsklab.deprecatednodes/js-src/de/bund/bfr/knime/fsklab/nodes/joiner/react/react.min.js and 1 other location - About 3 hrs to fix
de.bund.bfr.knime.fsklab.deprecatednodes/js-src/de/bund/bfr/knime/fsklab/nodes/joiner/react/react.min.js on lines 354..360

Duplicated Code

Duplicated code can lead to software that is hard to understand and difficult to change. The Don't Repeat Yourself (DRY) principle states:

Every piece of knowledge must have a single, unambiguous, authoritative representation within a system.

When you violate DRY, bugs and maintenance problems are sure to follow. Duplicated code has a tendency to both continue to replicate and also to diverge (leaving bugs as two similar implementations differ in subtle ways).

Tuning

This issue has a mass of 105.

We set useful threshold defaults for the languages we support but you may want to adjust these settings based on your project guidelines.

The threshold configuration represents the minimum mass a code block must have to be analyzed for duplication. The lower the threshold, the more fine-grained the comparison.

If the engine is too easily reporting duplication, try raising the threshold. If you suspect that the engine isn't catching enough duplication, try lowering the threshold. The best setting tends to differ from language to language.

See codeclimate-duplication's documentation for more information about tuning the mass threshold in your .codeclimate.yml.

Refactorings

Further Reading

Similar blocks of code found in 2 locations. Consider refactoring.
Open

            left: (
                pageX -                                                                // The absolute mouse position
                this.offset.click.left -                                                // Click offset (relative to the element)
                this.offset.relative.left    -                                            // Only for relative positioned nodes: Relative offset from element to offset parent
                this.offset.parent.left +                                                // The offsetParent's offset without borders (offset + border)
Severity: Major
Found in de.bund.bfr.knime.pmm.nodes/js-src/de/bund/bfr/knime/pmm/js/modelplotter/jquery-ui.js and 1 other location - About 3 hrs to fix
de.bund.bfr.knime.pmm.nodes/js-src/de/bund/bfr/knime/pmm/js/modelplotter/jquery-ui.js on lines 5615..5621

Duplicated Code

Duplicated code can lead to software that is hard to understand and difficult to change. The Don't Repeat Yourself (DRY) principle states:

Every piece of knowledge must have a single, unambiguous, authoritative representation within a system.

When you violate DRY, bugs and maintenance problems are sure to follow. Duplicated code has a tendency to both continue to replicate and also to diverge (leaving bugs as two similar implementations differ in subtle ways).

Tuning

This issue has a mass of 105.

We set useful threshold defaults for the languages we support but you may want to adjust these settings based on your project guidelines.

The threshold configuration represents the minimum mass a code block must have to be analyzed for duplication. The lower the threshold, the more fine-grained the comparison.

If the engine is too easily reporting duplication, try raising the threshold. If you suspect that the engine isn't catching enough duplication, try lowering the threshold. The best setting tends to differ from language to language.

See codeclimate-duplication's documentation for more information about tuning the mass threshold in your .codeclimate.yml.

Refactorings

Further Reading

Similar blocks of code found in 2 locations. Consider refactoring.
Open

  function Plugin(option) {
    return this.each(function () {
      var $this = $(this)
      var data  = $this.data('bs.alert')
Severity: Major
Found in de.bund.bfr.knime.fsklab.deprecatednodes/js-src/bootstrap/3_3_7/debug/js/bootstrap.js and 1 other location - About 3 hrs to fix
de.bund.bfr.knime.fsklab.deprecatednodes/js-src/bootstrap/3_3_7/debug/js/bootstrap.js on lines 880..888

Duplicated Code

Duplicated code can lead to software that is hard to understand and difficult to change. The Don't Repeat Yourself (DRY) principle states:

Every piece of knowledge must have a single, unambiguous, authoritative representation within a system.

When you violate DRY, bugs and maintenance problems are sure to follow. Duplicated code has a tendency to both continue to replicate and also to diverge (leaving bugs as two similar implementations differ in subtle ways).

Tuning

This issue has a mass of 105.

We set useful threshold defaults for the languages we support but you may want to adjust these settings based on your project guidelines.

The threshold configuration represents the minimum mass a code block must have to be analyzed for duplication. The lower the threshold, the more fine-grained the comparison.

If the engine is too easily reporting duplication, try raising the threshold. If you suspect that the engine isn't catching enough duplication, try lowering the threshold. The best setting tends to differ from language to language.

See codeclimate-duplication's documentation for more information about tuning the mass threshold in your .codeclimate.yml.

Refactorings

Further Reading

Similar blocks of code found in 2 locations. Consider refactoring.
Open

  function Plugin(option) {
    return this.each(function () {
      var $this = $(this)
      var data  = $this.data('bs.dropdown')
Severity: Major
Found in de.bund.bfr.knime.fsklab.deprecatednodes/js-src/bootstrap/3_3_7/debug/js/bootstrap.js and 1 other location - About 3 hrs to fix
de.bund.bfr.knime.fsklab.deprecatednodes/js-src/bootstrap/3_3_7/debug/js/bootstrap.js on lines 142..150

Duplicated Code

Duplicated code can lead to software that is hard to understand and difficult to change. The Don't Repeat Yourself (DRY) principle states:

Every piece of knowledge must have a single, unambiguous, authoritative representation within a system.

When you violate DRY, bugs and maintenance problems are sure to follow. Duplicated code has a tendency to both continue to replicate and also to diverge (leaving bugs as two similar implementations differ in subtle ways).

Tuning

This issue has a mass of 105.

We set useful threshold defaults for the languages we support but you may want to adjust these settings based on your project guidelines.

The threshold configuration represents the minimum mass a code block must have to be analyzed for duplication. The lower the threshold, the more fine-grained the comparison.

If the engine is too easily reporting duplication, try raising the threshold. If you suspect that the engine isn't catching enough duplication, try lowering the threshold. The best setting tends to differ from language to language.

See codeclimate-duplication's documentation for more information about tuning the mass threshold in your .codeclimate.yml.

Refactorings

Further Reading

Similar blocks of code found in 2 locations. Consider refactoring.
Open

            while (dowCnt < this.o.weekStart + 7){
                html += '<th class="dow';
        if ($.inArray(dowCnt, this.o.daysOfWeekDisabled) !== -1)
          html += ' disabled';
        html += '">'+dates[this.o.language].daysMin[(dowCnt++)%7]+'</th>';
Severity: Major
Found in de.bund.bfr.knime.js/src/js/lib/bootstrap-datepicker.js and 1 other location - About 3 hrs to fix
de.bund.bfr.knime.fsklab.deprecatednodes/js-src/bootstrap-datepicker/1_6_4/debug/js/bootstrap-datepicker.js on lines 816..821

Duplicated Code

Duplicated code can lead to software that is hard to understand and difficult to change. The Don't Repeat Yourself (DRY) principle states:

Every piece of knowledge must have a single, unambiguous, authoritative representation within a system.

When you violate DRY, bugs and maintenance problems are sure to follow. Duplicated code has a tendency to both continue to replicate and also to diverge (leaving bugs as two similar implementations differ in subtle ways).

Tuning

This issue has a mass of 105.

We set useful threshold defaults for the languages we support but you may want to adjust these settings based on your project guidelines.

The threshold configuration represents the minimum mass a code block must have to be analyzed for duplication. The lower the threshold, the more fine-grained the comparison.

If the engine is too easily reporting duplication, try raising the threshold. If you suspect that the engine isn't catching enough duplication, try lowering the threshold. The best setting tends to differ from language to language.

See codeclimate-duplication's documentation for more information about tuning the mass threshold in your .codeclimate.yml.

Refactorings

Further Reading

Similar blocks of code found in 2 locations. Consider refactoring.
Open

            top: (
                pageY -                                                                // The absolute mouse position
                this.offset.click.top -                                                    // Click offset (relative to the element)
                this.offset.relative.top    -                                            // Only for relative positioned nodes: Relative offset from element to offset parent
                this.offset.parent.top +                                                // The offsetParent's offset without borders (offset + border)
Severity: Major
Found in de.bund.bfr.knime.pmm.nodes/js-src/de/bund/bfr/knime/pmm/js/modelplotter/jquery-ui.js and 1 other location - About 3 hrs to fix
de.bund.bfr.knime.pmm.nodes/js-src/de/bund/bfr/knime/pmm/js/modelplotter/jquery-ui.js on lines 5622..5628

Duplicated Code

Duplicated code can lead to software that is hard to understand and difficult to change. The Don't Repeat Yourself (DRY) principle states:

Every piece of knowledge must have a single, unambiguous, authoritative representation within a system.

When you violate DRY, bugs and maintenance problems are sure to follow. Duplicated code has a tendency to both continue to replicate and also to diverge (leaving bugs as two similar implementations differ in subtle ways).

Tuning

This issue has a mass of 105.

We set useful threshold defaults for the languages we support but you may want to adjust these settings based on your project guidelines.

The threshold configuration represents the minimum mass a code block must have to be analyzed for duplication. The lower the threshold, the more fine-grained the comparison.

If the engine is too easily reporting duplication, try raising the threshold. If you suspect that the engine isn't catching enough duplication, try lowering the threshold. The best setting tends to differ from language to language.

See codeclimate-duplication's documentation for more information about tuning the mass threshold in your .codeclimate.yml.

Refactorings

Further Reading

Similar blocks of code found in 2 locations. Consider refactoring.
Open

    if (!condition) {
      for (var _len2 = arguments.length, args = Array(_len2 > 2 ? _len2 - 2 : 0), _key2 = 2; _key2 < _len2; _key2++) {
        args[_key2 - 2] = arguments[_key2];
      }
Severity: Major
Found in de.bund.bfr.knime.fsklab.deprecatednodes/js-src/de/bund/bfr/knime/fsklab/nodes/joiner/react/react.min.js and 1 other location - About 3 hrs to fix
de.bund.bfr.knime.fsklab.deprecatednodes/js-src/de/bund/bfr/knime/fsklab/nodes/joiner/react/react.min.js on lines 256..262

Duplicated Code

Duplicated code can lead to software that is hard to understand and difficult to change. The Don't Repeat Yourself (DRY) principle states:

Every piece of knowledge must have a single, unambiguous, authoritative representation within a system.

When you violate DRY, bugs and maintenance problems are sure to follow. Duplicated code has a tendency to both continue to replicate and also to diverge (leaving bugs as two similar implementations differ in subtle ways).

Tuning

This issue has a mass of 105.

We set useful threshold defaults for the languages we support but you may want to adjust these settings based on your project guidelines.

The threshold configuration represents the minimum mass a code block must have to be analyzed for duplication. The lower the threshold, the more fine-grained the comparison.

If the engine is too easily reporting duplication, try raising the threshold. If you suspect that the engine isn't catching enough duplication, try lowering the threshold. The best setting tends to differ from language to language.

See codeclimate-duplication's documentation for more information about tuning the mass threshold in your .codeclimate.yml.

Refactorings

Further Reading

File DataTableDocumentImpl.java has 312 lines of code (exceeds 250 allowed). Consider refactoring.
Open

/*
 * An XML document type.
 * Localname: DataTable
 * Namespace: http://www.bfr.bund.de/PCML-1_0
 * Java type: de.bund.bfr.pcml10.DataTableDocument
Severity: Minor
Found in de.bund.bfr.knime.foodprocess.pcml/lib/src/de/bund/bfr/pcml10/impl/DataTableDocumentImpl.java - About 3 hrs to fix

Method saveNodes has 87 lines of code (exceeds 25 allowed). Consider refactoring.
Open

    private void saveNodes(WorkflowManager parent, Integer wfID) {
        /*
        DBKernel.sendRequest("INSERT INTO " + DBKernel.delimitL("ProzessElemente") + " () VALUES ()", false);
        DBKernel.sendRequest("INSERT INTO " + DBKernel.delimitL("Matrices") + " () VALUES ()", false);
        DBKernel.sendRequest("INSERT INTO " + DBKernel.delimitL("Zutatendaten") + " () VALUES ()", false);
Severity: Major
Found in de.bund.bfr.knime.foodprocess/src/de/bund/bfr/knime/foodprocess/db/WriterNodeModel.java - About 3 hrs to fix

Method createDataTuple has 87 lines of code (exceeds 25 allowed). Consider refactoring.
Open

    private KnimeTuple createDataTuple(TableReader reader, String id) {
        KnimeTuple dataTuple;
        KnimeTuple tuple = reader.getTupleMap().get(id);
        Plotable plotable = reader.getPlotables().get(id);
        Map<String, List<Double>> conditions = plotable.getFunctionArguments();
Severity: Major
Found in de.bund.bfr.knime.pmm.nodes/src/de/bund/bfr/knime/pmm/predictorview/PredictorViewNodeModel.java - About 3 hrs to fix

Method keyTyped has 87 lines of code (exceeds 25 allowed). Consider refactoring.
Open

  @Override
public void keyTyped(final KeyEvent keyEvent) {
      char ch = keyEvent.getKeyChar();
      //System.out.println(ch + "\t" + keyEvent.isConsumed());
    if (ch == KeyEvent.VK_TAB || ch == KeyEvent.VK_ENTER && !keyEvent.isAltDown() && !keyEvent.isControlDown()) {
Severity: Major
Found in org.hsh.bfr.db/src/org/hsh/bfr/db/gui/dbtable/MyDBTable.java - About 3 hrs to fix

Method saveValues has 87 lines of code (exceeds 25 allowed). Consider refactoring.
Open

    private Double saveValues() {
        Double result = null;
        try {
            String sql = "";
            if (oldValue != null) {
Severity: Major
Found in org.hsh.bfr.db/src/org/hsh/bfr/db/gui/dbtable/editoren/MyNewDoubleEditor.java - About 3 hrs to fix

Method getID has 87 lines of code (exceeds 25 allowed). Consider refactoring.
Open

    private Integer getID(String tablename, String[] feldnames, String[] feldVals, boolean[] key, boolean[] isStringType) {
        Integer result = null;
        String sql = "SELECT " + DBKernel.delimitL("ID") + " FROM " + DBKernel.delimitL(tablename) + " WHERE TRUE";
        String fns = "";
        String fvs = "";
Severity: Major
Found in org.hsh.bfr.db/src/org/hsh/bfr/db/imports/custom/LieferkettenImporterEFSA.java - About 3 hrs to fix

Method loadJsonSetting has 87 lines of code (exceeds 25 allowed). Consider refactoring.
Open

  protected void loadJsonSetting() throws IOException, CanceledExecutionException {

    File directory =
        NodeContext.getContext().getWorkflowManager().getContext().getCurrentLocation();
    File settingFolder = new File(buildContainerName());
Severity: Major
Found in de.bund.bfr.knime.fsklab.nodes/src/de/bund/bfr/knime/fsklab/v2_0/joiner/JoinerNodeModel.java - About 3 hrs to fix

Method plotBoth has 87 lines of code (exceeds 25 allowed). Consider refactoring.
Open

    private void plotBoth(XYPlot plot, Plotable plotable, String id,
            Color defaultColor, Shape defaultShape, double minX, double maxX)
            throws ConvertException {
        double[][] modelPoints = plotable.getFunctionPoints(paramX, paramY,
                unitX, unitY, transformX, transformY, minX, maxX,
Severity: Major
Found in de.bund.bfr.knime.pmm.common/src/de/bund/bfr/knime/pmm/common/chart/ChartCreator.java - About 3 hrs to fix

Method getValueAt has 87 lines of code (exceeds 25 allowed). Consider refactoring.
Open

    @Override
    public Object getValueAt(int row, int col) {
      if (col == 0)
        return FskMetaDataFields.values()[row].fullname;
      else if (col == 1) {
Severity: Major
Found in de.bund.bfr.knime.fsklab.nodes.common/src/de/bund/bfr/knime/fsklab/nodes/common/ui/MetaDataPane2.java - About 3 hrs to fix

Identical blocks of code found in 3 locations. Consider refactoring.
Open

    validate() {
        let isValid = true;
        if (!this.panels.generalInformation.validate()) isValid = false;
        if (!this.panels.scopeGeneral.validate()) isValid = false;
        if (!this.panels.study.validate()) isValid = false;
Severity: Major
Found in de.bund.bfr.knime.js/src/js/app/app.schemas.js and 2 other locations - About 3 hrs to fix
de.bund.bfr.knime.fsklab.deprecatednodes/js-src/de/bund/bfr/knime/fsklab/1.7.2/editor/editor.js on lines 170..176
de.bund.bfr.knime.js/js-lib/bfr/fskutil_1.0.0.js on lines 1193..1199

Duplicated Code

Duplicated code can lead to software that is hard to understand and difficult to change. The Don't Repeat Yourself (DRY) principle states:

Every piece of knowledge must have a single, unambiguous, authoritative representation within a system.

When you violate DRY, bugs and maintenance problems are sure to follow. Duplicated code has a tendency to both continue to replicate and also to diverge (leaving bugs as two similar implementations differ in subtle ways).

Tuning

This issue has a mass of 104.

We set useful threshold defaults for the languages we support but you may want to adjust these settings based on your project guidelines.

The threshold configuration represents the minimum mass a code block must have to be analyzed for duplication. The lower the threshold, the more fine-grained the comparison.

If the engine is too easily reporting duplication, try raising the threshold. If you suspect that the engine isn't catching enough duplication, try lowering the threshold. The best setting tends to differ from language to language.

See codeclimate-duplication's documentation for more information about tuning the mass threshold in your .codeclimate.yml.

Refactorings

Further Reading

Identical blocks of code found in 3 locations. Consider refactoring.
Open

        validate() {
            let isValid = true;
            if (!this.panels.generalInformation.validate()) isValid = false;
            if (!this.panels.scopeGeneral.validate()) isValid = false;
            if (!this.panels.study.validate()) isValid = false;
Severity: Major
Found in de.bund.bfr.knime.js/js-lib/bfr/fskutil_1.0.0.js and 2 other locations - About 3 hrs to fix
de.bund.bfr.knime.fsklab.deprecatednodes/js-src/de/bund/bfr/knime/fsklab/1.7.2/editor/editor.js on lines 170..176
de.bund.bfr.knime.js/src/js/app/app.schemas.js on lines 467..473

Duplicated Code

Duplicated code can lead to software that is hard to understand and difficult to change. The Don't Repeat Yourself (DRY) principle states:

Every piece of knowledge must have a single, unambiguous, authoritative representation within a system.

When you violate DRY, bugs and maintenance problems are sure to follow. Duplicated code has a tendency to both continue to replicate and also to diverge (leaving bugs as two similar implementations differ in subtle ways).

Tuning

This issue has a mass of 104.

We set useful threshold defaults for the languages we support but you may want to adjust these settings based on your project guidelines.

The threshold configuration represents the minimum mass a code block must have to be analyzed for duplication. The lower the threshold, the more fine-grained the comparison.

If the engine is too easily reporting duplication, try raising the threshold. If you suspect that the engine isn't catching enough duplication, try lowering the threshold. The best setting tends to differ from language to language.

See codeclimate-duplication's documentation for more information about tuning the mass threshold in your .codeclimate.yml.

Refactorings

Further Reading

Identical blocks of code found in 3 locations. Consider refactoring.
Open

    validate() {
      let isValid = true;
      if (!this.panels.generalInformation.validate()) isValid = false;
      if (!this.panels.scopeGeneral.validate()) isValid = false;
      if (!this.panels.study.validate()) isValid = false;
Severity: Major
Found in de.bund.bfr.knime.fsklab.deprecatednodes/js-src/de/bund/bfr/knime/fsklab/1.7.2/editor/editor.js and 2 other locations - About 3 hrs to fix
de.bund.bfr.knime.js/js-lib/bfr/fskutil_1.0.0.js on lines 1193..1199
de.bund.bfr.knime.js/src/js/app/app.schemas.js on lines 467..473

Duplicated Code

Duplicated code can lead to software that is hard to understand and difficult to change. The Don't Repeat Yourself (DRY) principle states:

Every piece of knowledge must have a single, unambiguous, authoritative representation within a system.

When you violate DRY, bugs and maintenance problems are sure to follow. Duplicated code has a tendency to both continue to replicate and also to diverge (leaving bugs as two similar implementations differ in subtle ways).

Tuning

This issue has a mass of 104.

We set useful threshold defaults for the languages we support but you may want to adjust these settings based on your project guidelines.

The threshold configuration represents the minimum mass a code block must have to be analyzed for duplication. The lower the threshold, the more fine-grained the comparison.

If the engine is too easily reporting duplication, try raising the threshold. If you suspect that the engine isn't catching enough duplication, try lowering the threshold. The best setting tends to differ from language to language.

See codeclimate-duplication's documentation for more information about tuning the mass threshold in your .codeclimate.yml.

Refactorings

Further Reading

Severity
Category
Status
Source
Language