Sign upLogin

SiLeBAT/FSK-Lab

View on GitHub
Star

Showing 14,752 of 14,752 total issues

Identical blocks of code found in 2 locations. Consider refactoring.
Open

    {
      // Gets name of dependent variable from the model rule (1)
      Model model = primModelDoc.getModel();
      ModelRule rule = new ModelRule((AssignmentRule) model.getRule(0));
      String depName = rule.getVariable();
Severity: Major
Found in de.bund.bfr.knime.pmm.nodes/src/de/bund/bfr/knime/pmm/FSMRUtils.java and 1 other location - About 1 hr to fix
de.bund.bfr.knime.pmm.nodes/src/de/bund/bfr/knime/pmm/FSMRUtils.java on lines 804..817

Duplicated Code

Duplicated code can lead to software that is hard to understand and difficult to change. The Don't Repeat Yourself (DRY) principle states:

Every piece of knowledge must have a single, unambiguous, authoritative representation within a system.

When you violate DRY, bugs and maintenance problems are sure to follow. Duplicated code has a tendency to both continue to replicate and also to diverge (leaving bugs as two similar implementations differ in subtle ways).

Tuning

This issue has a mass of 100.

We set useful threshold defaults for the languages we support but you may want to adjust these settings based on your project guidelines.

The threshold configuration represents the minimum mass a code block must have to be analyzed for duplication. The lower the threshold, the more fine-grained the comparison.

If the engine is too easily reporting duplication, try raising the threshold. If you suspect that the engine isn't catching enough duplication, try lowering the threshold. The best setting tends to differ from language to language.

See codeclimate-duplication's documentation for more information about tuning the mass threshold in your .codeclimate.yml.

Refactorings

Further Reading

Identical blocks of code found in 2 locations. Consider refactoring.
Open

        if (catalogModelSecXml != null) {
            final CatalogModel catalogModelSec = new CatalogModel();
            catalogModelSec.id = catalogModelSecXml.id;
            catalogModelSec.name = catalogModelSecXml.name;
            catalogModelSec.formula = catalogModelSecXml.formula;
Severity: Major
Found in de.bund.bfr.knime.pmm.nodes/src/de/bund/bfr/knime/pmm/editor/ModelEditorNodeModel.java and 1 other location - About 1 hr to fix
de.bund.bfr.knime.pmm.nodes/src/de/bund/bfr/knime/pmm/editor/ModelEditorNodeModel.java on lines 307..316

Duplicated Code

Duplicated code can lead to software that is hard to understand and difficult to change. The Don't Repeat Yourself (DRY) principle states:

Every piece of knowledge must have a single, unambiguous, authoritative representation within a system.

When you violate DRY, bugs and maintenance problems are sure to follow. Duplicated code has a tendency to both continue to replicate and also to diverge (leaving bugs as two similar implementations differ in subtle ways).

Tuning

This issue has a mass of 100.

We set useful threshold defaults for the languages we support but you may want to adjust these settings based on your project guidelines.

The threshold configuration represents the minimum mass a code block must have to be analyzed for duplication. The lower the threshold, the more fine-grained the comparison.

If the engine is too easily reporting duplication, try raising the threshold. If you suspect that the engine isn't catching enough duplication, try lowering the threshold. The best setting tends to differ from language to language.

See codeclimate-duplication's documentation for more information about tuning the mass threshold in your .codeclimate.yml.

Refactorings

Further Reading

Identical blocks of code found in 2 locations. Consider refactoring.
Open

                    if (sbmlUnit != null) {
                        UnitDefinition unit = SBMLUtilities.fromXml(sbmlUnit);
                        Unit.Kind kind = SBMLUtilities.simplify(unit);
                        UnitDefinition modelUnit = model.getUnitDefinition(unit.getId());
Severity: Major
Found in de.bund.bfr.knime.pmm.nodes/src/de/bund/bfr/knime/pmm/sbmlwriter/SBMLWriterNodeModel.java and 1 other location - About 1 hr to fix
de.bund.bfr.knime.pmm.nodes/src/de/bund/bfr/knime/pmm/sbmlwriter/SBMLWriterNodeModel.java on lines 271..283

Duplicated Code

Duplicated code can lead to software that is hard to understand and difficult to change. The Don't Repeat Yourself (DRY) principle states:

Every piece of knowledge must have a single, unambiguous, authoritative representation within a system.

When you violate DRY, bugs and maintenance problems are sure to follow. Duplicated code has a tendency to both continue to replicate and also to diverge (leaving bugs as two similar implementations differ in subtle ways).

Tuning

This issue has a mass of 100.

We set useful threshold defaults for the languages we support but you may want to adjust these settings based on your project guidelines.

The threshold configuration represents the minimum mass a code block must have to be analyzed for duplication. The lower the threshold, the more fine-grained the comparison.

If the engine is too easily reporting duplication, try raising the threshold. If you suspect that the engine isn't catching enough duplication, try lowering the threshold. The best setting tends to differ from language to language.

See codeclimate-duplication's documentation for more information about tuning the mass threshold in your .codeclimate.yml.

Refactorings

Further Reading

Identical blocks of code found in 2 locations. Consider refactoring.
Open

    for (org.jlibsedml.Model model : sedml.getModels()) {

      Map<String, String> params = model.getListOfChanges().stream()
          .filter(change -> change.getChangeKind().equals(SEDMLTags.CHANGE_ATTRIBUTE_KIND))
          .map(change -> (ChangeAttribute) change).collect(Collectors
Severity: Major
Found in de.bund.bfr.knime.fsklab.deprecatednodes/src-1_9_0/de/bund/bfr/knime/fsklab/v1_9/reader/ReaderNodeModel.java and 1 other location - About 1 hr to fix
de.bund.bfr.knime.fsklab.deprecatednodes/src-1_7_2/de/bund/bfr/knime/fsklab/nodes/v1_7_2/reader/ReaderNodeModel.java on lines 670..681

Duplicated Code

Duplicated code can lead to software that is hard to understand and difficult to change. The Don't Repeat Yourself (DRY) principle states:

Every piece of knowledge must have a single, unambiguous, authoritative representation within a system.

When you violate DRY, bugs and maintenance problems are sure to follow. Duplicated code has a tendency to both continue to replicate and also to diverge (leaving bugs as two similar implementations differ in subtle ways).

Tuning

This issue has a mass of 100.

We set useful threshold defaults for the languages we support but you may want to adjust these settings based on your project guidelines.

The threshold configuration represents the minimum mass a code block must have to be analyzed for duplication. The lower the threshold, the more fine-grained the comparison.

If the engine is too easily reporting duplication, try raising the threshold. If you suspect that the engine isn't catching enough duplication, try lowering the threshold. The best setting tends to differ from language to language.

See codeclimate-duplication's documentation for more information about tuning the mass threshold in your .codeclimate.yml.

Refactorings

Further Reading

Identical blocks of code found in 2 locations. Consider refactoring.
Open

                if (depSbmlUnit != null) {
                    UnitDefinition unit = SBMLUtilities.fromXml(depSbmlUnit);
                    Unit.Kind kind = SBMLUtilities.simplify(unit);
                    UnitDefinition modelUnit = model.getUnitDefinition(unit.getId());
Severity: Major
Found in de.bund.bfr.knime.pmm.nodes/src/de/bund/bfr/knime/pmm/sbmlwriter/SBMLWriterNodeModel.java and 1 other location - About 1 hr to fix
de.bund.bfr.knime.pmm.nodes/src/de/bund/bfr/knime/pmm/sbmlwriter/SBMLWriterNodeModel.java on lines 343..355

Duplicated Code

Duplicated code can lead to software that is hard to understand and difficult to change. The Don't Repeat Yourself (DRY) principle states:

Every piece of knowledge must have a single, unambiguous, authoritative representation within a system.

When you violate DRY, bugs and maintenance problems are sure to follow. Duplicated code has a tendency to both continue to replicate and also to diverge (leaving bugs as two similar implementations differ in subtle ways).

Tuning

This issue has a mass of 100.

We set useful threshold defaults for the languages we support but you may want to adjust these settings based on your project guidelines.

The threshold configuration represents the minimum mass a code block must have to be analyzed for duplication. The lower the threshold, the more fine-grained the comparison.

If the engine is too easily reporting duplication, try raising the threshold. If you suspect that the engine isn't catching enough duplication, try lowering the threshold. The best setting tends to differ from language to language.

See codeclimate-duplication's documentation for more information about tuning the mass threshold in your .codeclimate.yml.

Refactorings

Further Reading

Similar blocks of code found in 3 locations. Consider refactoring.
Open

        } else if (set.getJoinType().equals(SettingsHelper.COMBINED_JOIN)) {
            if (SchemaFactory.conformsM12Schema(input[0].getSpec())
                    && SchemaFactory.conformsDataSchema(input[1].getSpec())) {
                joiner = new CombinedJoiner(input[0], input[1]);
            } else if (SchemaFactory.conformsM12Schema(input[1].getSpec())
Severity: Major
Found in de.bund.bfr.knime.pmm.nodes/src/de/bund/bfr/knime/pmm/modelanddatajoiner/ModelAndDataJoinerNodeDialog.java and 2 other locations - About 1 hr to fix
de.bund.bfr.knime.pmm.nodes/src/de/bund/bfr/knime/pmm/modelanddatajoiner/ModelAndDataJoinerNodeDialog.java on lines 139..149
de.bund.bfr.knime.pmm.nodes/src/de/bund/bfr/knime/pmm/modelanddatajoiner/ModelAndDataJoinerNodeDialog.java on lines 129..139

Duplicated Code

Duplicated code can lead to software that is hard to understand and difficult to change. The Don't Repeat Yourself (DRY) principle states:

Every piece of knowledge must have a single, unambiguous, authoritative representation within a system.

When you violate DRY, bugs and maintenance problems are sure to follow. Duplicated code has a tendency to both continue to replicate and also to diverge (leaving bugs as two similar implementations differ in subtle ways).

Tuning

This issue has a mass of 100.

We set useful threshold defaults for the languages we support but you may want to adjust these settings based on your project guidelines.

The threshold configuration represents the minimum mass a code block must have to be analyzed for duplication. The lower the threshold, the more fine-grained the comparison.

If the engine is too easily reporting duplication, try raising the threshold. If you suspect that the engine isn't catching enough duplication, try lowering the threshold. The best setting tends to differ from language to language.

See codeclimate-duplication's documentation for more information about tuning the mass threshold in your .codeclimate.yml.

Refactorings

Further Reading

Similar blocks of code found in 3 locations. Consider refactoring.
Open

        } else if (set.getJoinType().equals(SettingsHelper.SECONDARY_JOIN)) {
            if (SchemaFactory.conformsM2Schema(input[0].getSpec())
                    && SchemaFactory.conformsM1DataSchema(input[1].getSpec())) {
                joiner = new SecondaryJoiner(input[0], input[1]);
            } else if (SchemaFactory.conformsM2Schema(input[1].getSpec())
Severity: Major
Found in de.bund.bfr.knime.pmm.nodes/src/de/bund/bfr/knime/pmm/modelanddatajoiner/ModelAndDataJoinerNodeDialog.java and 2 other locations - About 1 hr to fix
de.bund.bfr.knime.pmm.nodes/src/de/bund/bfr/knime/pmm/modelanddatajoiner/ModelAndDataJoinerNodeDialog.java on lines 149..159
de.bund.bfr.knime.pmm.nodes/src/de/bund/bfr/knime/pmm/modelanddatajoiner/ModelAndDataJoinerNodeDialog.java on lines 129..139

Duplicated Code

Duplicated code can lead to software that is hard to understand and difficult to change. The Don't Repeat Yourself (DRY) principle states:

Every piece of knowledge must have a single, unambiguous, authoritative representation within a system.

When you violate DRY, bugs and maintenance problems are sure to follow. Duplicated code has a tendency to both continue to replicate and also to diverge (leaving bugs as two similar implementations differ in subtle ways).

Tuning

This issue has a mass of 100.

We set useful threshold defaults for the languages we support but you may want to adjust these settings based on your project guidelines.

The threshold configuration represents the minimum mass a code block must have to be analyzed for duplication. The lower the threshold, the more fine-grained the comparison.

If the engine is too easily reporting duplication, try raising the threshold. If you suspect that the engine isn't catching enough duplication, try lowering the threshold. The best setting tends to differ from language to language.

See codeclimate-duplication's documentation for more information about tuning the mass threshold in your .codeclimate.yml.

Refactorings

Further Reading

Identical blocks of code found in 2 locations. Consider refactoring.
Open

    for (org.jlibsedml.Model model : sedml.getModels()) {

      Map<String, String> params = model.getListOfChanges().stream()
          .filter(change -> change.getChangeKind().equals(SEDMLTags.CHANGE_ATTRIBUTE_KIND))
          .map(change -> (ChangeAttribute) change)
Severity: Major
Found in de.bund.bfr.knime.fsklab.deprecatednodes/src-1_7_2/de/bund/bfr/knime/fsklab/nodes/v1_7_2/reader/ReaderNodeModel.java and 1 other location - About 1 hr to fix
de.bund.bfr.knime.fsklab.deprecatednodes/src-1_9_0/de/bund/bfr/knime/fsklab/v1_9/reader/ReaderNodeModel.java on lines 694..705

Duplicated Code

Duplicated code can lead to software that is hard to understand and difficult to change. The Don't Repeat Yourself (DRY) principle states:

Every piece of knowledge must have a single, unambiguous, authoritative representation within a system.

When you violate DRY, bugs and maintenance problems are sure to follow. Duplicated code has a tendency to both continue to replicate and also to diverge (leaving bugs as two similar implementations differ in subtle ways).

Tuning

This issue has a mass of 100.

We set useful threshold defaults for the languages we support but you may want to adjust these settings based on your project guidelines.

The threshold configuration represents the minimum mass a code block must have to be analyzed for duplication. The lower the threshold, the more fine-grained the comparison.

If the engine is too easily reporting duplication, try raising the threshold. If you suspect that the engine isn't catching enough duplication, try lowering the threshold. The best setting tends to differ from language to language.

See codeclimate-duplication's documentation for more information about tuning the mass threshold in your .codeclimate.yml.

Refactorings

Further Reading

Identical blocks of code found in 2 locations. Consider refactoring.
Open

                if (box.getSelectedItem() == null) {
                    isValid = false;
                } else {
                    JComboBox<String> sameValueBox = depVarBoxes.get(box
                            .getSelectedItem());
Severity: Major
Found in de.bund.bfr.knime.pmm.nodes/src/de/bund/bfr/knime/pmm/modelanddatajoiner/SecondaryJoiner.java and 1 other location - About 1 hr to fix
de.bund.bfr.knime.pmm.nodes/src/de/bund/bfr/knime/pmm/modelanddatajoiner/SecondaryJoiner.java on lines 668..683

Duplicated Code

Duplicated code can lead to software that is hard to understand and difficult to change. The Don't Repeat Yourself (DRY) principle states:

Every piece of knowledge must have a single, unambiguous, authoritative representation within a system.

When you violate DRY, bugs and maintenance problems are sure to follow. Duplicated code has a tendency to both continue to replicate and also to diverge (leaving bugs as two similar implementations differ in subtle ways).

Tuning

This issue has a mass of 100.

We set useful threshold defaults for the languages we support but you may want to adjust these settings based on your project guidelines.

The threshold configuration represents the minimum mass a code block must have to be analyzed for duplication. The lower the threshold, the more fine-grained the comparison.

If the engine is too easily reporting duplication, try raising the threshold. If you suspect that the engine isn't catching enough duplication, try lowering the threshold. The best setting tends to differ from language to language.

See codeclimate-duplication's documentation for more information about tuning the mass threshold in your .codeclimate.yml.

Refactorings

Further Reading

Similar blocks of code found in 3 locations. Consider refactoring.
Open

        if (set.getJoinType().equals(SettingsHelper.PRIMARY_JOIN)) {
            if (SchemaFactory.conformsM1Schema(input[0].getSpec())
                    && SchemaFactory.conformsDataSchema(input[1].getSpec())) {
                joiner = new PrimaryJoiner(input[0], input[1]);
            } else if (SchemaFactory.conformsM1Schema(input[1].getSpec())
Severity: Major
Found in de.bund.bfr.knime.pmm.nodes/src/de/bund/bfr/knime/pmm/modelanddatajoiner/ModelAndDataJoinerNodeDialog.java and 2 other locations - About 1 hr to fix
de.bund.bfr.knime.pmm.nodes/src/de/bund/bfr/knime/pmm/modelanddatajoiner/ModelAndDataJoinerNodeDialog.java on lines 149..159
de.bund.bfr.knime.pmm.nodes/src/de/bund/bfr/knime/pmm/modelanddatajoiner/ModelAndDataJoinerNodeDialog.java on lines 139..149

Duplicated Code

Duplicated code can lead to software that is hard to understand and difficult to change. The Don't Repeat Yourself (DRY) principle states:

Every piece of knowledge must have a single, unambiguous, authoritative representation within a system.

When you violate DRY, bugs and maintenance problems are sure to follow. Duplicated code has a tendency to both continue to replicate and also to diverge (leaving bugs as two similar implementations differ in subtle ways).

Tuning

This issue has a mass of 100.

We set useful threshold defaults for the languages we support but you may want to adjust these settings based on your project guidelines.

The threshold configuration represents the minimum mass a code block must have to be analyzed for duplication. The lower the threshold, the more fine-grained the comparison.

If the engine is too easily reporting duplication, try raising the threshold. If you suspect that the engine isn't catching enough duplication, try lowering the threshold. The best setting tends to differ from language to language.

See codeclimate-duplication's documentation for more information about tuning the mass threshold in your .codeclimate.yml.

Refactorings

Further Reading

Identical blocks of code found in 2 locations. Consider refactoring.
Open

    {
      // Gets name of dependent variable from the model rule (2)
      Model model = secModelDoc.getModel();
      ModelRule rule2 = new ModelRule((AssignmentRule) model.getRule(0));
      String depName = rule2.getVariable();
Severity: Major
Found in de.bund.bfr.knime.pmm.nodes/src/de/bund/bfr/knime/pmm/FSMRUtils.java and 1 other location - About 1 hr to fix
de.bund.bfr.knime.pmm.nodes/src/de/bund/bfr/knime/pmm/FSMRUtils.java on lines 788..801

Duplicated Code

Duplicated code can lead to software that is hard to understand and difficult to change. The Don't Repeat Yourself (DRY) principle states:

Every piece of knowledge must have a single, unambiguous, authoritative representation within a system.

When you violate DRY, bugs and maintenance problems are sure to follow. Duplicated code has a tendency to both continue to replicate and also to diverge (leaving bugs as two similar implementations differ in subtle ways).

Tuning

This issue has a mass of 100.

We set useful threshold defaults for the languages we support but you may want to adjust these settings based on your project guidelines.

The threshold configuration represents the minimum mass a code block must have to be analyzed for duplication. The lower the threshold, the more fine-grained the comparison.

If the engine is too easily reporting duplication, try raising the threshold. If you suspect that the engine isn't catching enough duplication, try lowering the threshold. The best setting tends to differ from language to language.

See codeclimate-duplication's documentation for more information about tuning the mass threshold in your .codeclimate.yml.

Refactorings

Further Reading

Similar blocks of code found in 2 locations. Consider refactoring.
Open

    public static Indep toIndep(IndepXml indepXml) {
        Indep indep = new Indep();
        indep.name = indepXml.name;
        indep.origname = indepXml.origName;
        indep.min = indepXml.min;
Severity: Major
Found in de.bund.bfr.knime.pmm.nodes/src/de/bund/bfr/knime/pmm/js/common/Indep.java and 1 other location - About 1 hr to fix
de.bund.bfr.knime.pmm.nodes/src/de/bund/bfr/knime/pmm/js/common/Dep.java on lines 90..101

Duplicated Code

Duplicated code can lead to software that is hard to understand and difficult to change. The Don't Repeat Yourself (DRY) principle states:

Every piece of knowledge must have a single, unambiguous, authoritative representation within a system.

When you violate DRY, bugs and maintenance problems are sure to follow. Duplicated code has a tendency to both continue to replicate and also to diverge (leaving bugs as two similar implementations differ in subtle ways).

Tuning

This issue has a mass of 100.

We set useful threshold defaults for the languages we support but you may want to adjust these settings based on your project guidelines.

The threshold configuration represents the minimum mass a code block must have to be analyzed for duplication. The lower the threshold, the more fine-grained the comparison.

If the engine is too easily reporting duplication, try raising the threshold. If you suspect that the engine isn't catching enough duplication, try lowering the threshold. The best setting tends to differ from language to language.

See codeclimate-duplication's documentation for more information about tuning the mass threshold in your .codeclimate.yml.

Refactorings

Further Reading

Similar blocks of code found in 2 locations. Consider refactoring.
Open

    public static List<Integer> getIntList(DataCell cell) {
        if (cell.isMissing()) {
            return new ArrayList<>();
        }
Severity: Major
Found in de.bund.bfr.knime.pmm.common/src/de/bund/bfr/knime/pmm/common/CellIO.java and 1 other location - About 1 hr to fix
de.bund.bfr.knime.pmm.common/src/de/bund/bfr/knime/pmm/common/CellIO.java on lines 132..153

Duplicated Code

Duplicated code can lead to software that is hard to understand and difficult to change. The Don't Repeat Yourself (DRY) principle states:

Every piece of knowledge must have a single, unambiguous, authoritative representation within a system.

When you violate DRY, bugs and maintenance problems are sure to follow. Duplicated code has a tendency to both continue to replicate and also to diverge (leaving bugs as two similar implementations differ in subtle ways).

Tuning

This issue has a mass of 100.

We set useful threshold defaults for the languages we support but you may want to adjust these settings based on your project guidelines.

The threshold configuration represents the minimum mass a code block must have to be analyzed for duplication. The lower the threshold, the more fine-grained the comparison.

If the engine is too easily reporting duplication, try raising the threshold. If you suspect that the engine isn't catching enough duplication, try lowering the threshold. The best setting tends to differ from language to language.

See codeclimate-duplication's documentation for more information about tuning the mass threshold in your .codeclimate.yml.

Refactorings

Further Reading

Similar blocks of code found in 2 locations. Consider refactoring.
Open

    public static Dep toDep(DepXml depXml) {
        Dep dep = new Dep();
        dep.name = depXml.name;
        dep.origname = depXml.origName;
        dep.min = depXml.min;
Severity: Major
Found in de.bund.bfr.knime.pmm.nodes/src/de/bund/bfr/knime/pmm/js/common/Dep.java and 1 other location - About 1 hr to fix
de.bund.bfr.knime.pmm.nodes/src/de/bund/bfr/knime/pmm/js/common/Indep.java on lines 109..120

Duplicated Code

Duplicated code can lead to software that is hard to understand and difficult to change. The Don't Repeat Yourself (DRY) principle states:

Every piece of knowledge must have a single, unambiguous, authoritative representation within a system.

When you violate DRY, bugs and maintenance problems are sure to follow. Duplicated code has a tendency to both continue to replicate and also to diverge (leaving bugs as two similar implementations differ in subtle ways).

Tuning

This issue has a mass of 100.

We set useful threshold defaults for the languages we support but you may want to adjust these settings based on your project guidelines.

The threshold configuration represents the minimum mass a code block must have to be analyzed for duplication. The lower the threshold, the more fine-grained the comparison.

If the engine is too easily reporting duplication, try raising the threshold. If you suspect that the engine isn't catching enough duplication, try lowering the threshold. The best setting tends to differ from language to language.

See codeclimate-duplication's documentation for more information about tuning the mass threshold in your .codeclimate.yml.

Refactorings

Further Reading

Similar blocks of code found in 2 locations. Consider refactoring.
Open

    private void button4ActionPerformed(ActionEvent e) {
        String hilfe = "In der linken Spalte der Tabelle können einzelne Punkte für die x-Achse angegeben werden.\n" +
            "In der rechten Spalte die zugehörigen Werte.\n" +
            "Es ist möglich für die x-Achse Intervalle einzugeben mit '-' als Trennzeichen (z.B. 3-5).\n" +
            "Außerdem ist es möglich verschiedene Einheiten für Zeiten anzugeben, z.B. 3d 13h 13m 5s\n" +
Severity: Major
Found in org.hsh.bfr.db/src/org/hsh/bfr/db/gui/dbtable/editoren/MyChartDialog.java and 1 other location - About 1 hr to fix
de.bund.bfr.knime.foodprocess/src/de/bund/bfr/knime/foodprocess/ui/MyChartDialog.java on lines 143..162

Duplicated Code

Duplicated code can lead to software that is hard to understand and difficult to change. The Don't Repeat Yourself (DRY) principle states:

Every piece of knowledge must have a single, unambiguous, authoritative representation within a system.

When you violate DRY, bugs and maintenance problems are sure to follow. Duplicated code has a tendency to both continue to replicate and also to diverge (leaving bugs as two similar implementations differ in subtle ways).

Tuning

This issue has a mass of 100.

We set useful threshold defaults for the languages we support but you may want to adjust these settings based on your project guidelines.

The threshold configuration represents the minimum mass a code block must have to be analyzed for duplication. The lower the threshold, the more fine-grained the comparison.

If the engine is too easily reporting duplication, try raising the threshold. If you suspect that the engine isn't catching enough duplication, try lowering the threshold. The best setting tends to differ from language to language.

See codeclimate-duplication's documentation for more information about tuning the mass threshold in your .codeclimate.yml.

Refactorings

Further Reading

Similar blocks of code found in 2 locations. Consider refactoring.
Open

    public static List<Double> getDoubleList(DataCell cell) {
        if (cell.isMissing()) {
            return new ArrayList<>();
        }
Severity: Major
Found in de.bund.bfr.knime.pmm.common/src/de/bund/bfr/knime/pmm/common/CellIO.java and 1 other location - About 1 hr to fix
de.bund.bfr.knime.pmm.common/src/de/bund/bfr/knime/pmm/common/CellIO.java on lines 161..182

Duplicated Code

Duplicated code can lead to software that is hard to understand and difficult to change. The Don't Repeat Yourself (DRY) principle states:

Every piece of knowledge must have a single, unambiguous, authoritative representation within a system.

When you violate DRY, bugs and maintenance problems are sure to follow. Duplicated code has a tendency to both continue to replicate and also to diverge (leaving bugs as two similar implementations differ in subtle ways).

Tuning

This issue has a mass of 100.

We set useful threshold defaults for the languages we support but you may want to adjust these settings based on your project guidelines.

The threshold configuration represents the minimum mass a code block must have to be analyzed for duplication. The lower the threshold, the more fine-grained the comparison.

If the engine is too easily reporting duplication, try raising the threshold. If you suspect that the engine isn't catching enough duplication, try lowering the threshold. The best setting tends to differ from language to language.

See codeclimate-duplication's documentation for more information about tuning the mass threshold in your .codeclimate.yml.

Refactorings

Further Reading

Similar blocks of code found in 2 locations. Consider refactoring.
Open

    private void button4ActionPerformed(ActionEvent e) {
        String hilfe = "In der linken Spalte der Tabelle können einzelne Punkte für die x-Achse angegeben werden.\n" +
            "In der rechten Spalte die zugehörigen Werte.\n" +
            "Es ist möglich für die x-Achse Intervalle einzugeben mit '-' als Trennzeichen (z.B. 3-5).\n" +
            "Außerdem ist es möglich verschiedene Einheiten für Zeiten anzugeben, z.B. 3d 13h 13m 5s\n" +
Severity: Major
Found in de.bund.bfr.knime.foodprocess/src/de/bund/bfr/knime/foodprocess/ui/MyChartDialog.java and 1 other location - About 1 hr to fix
org.hsh.bfr.db/src/org/hsh/bfr/db/gui/dbtable/editoren/MyChartDialog.java on lines 122..138

Duplicated Code

Duplicated code can lead to software that is hard to understand and difficult to change. The Don't Repeat Yourself (DRY) principle states:

Every piece of knowledge must have a single, unambiguous, authoritative representation within a system.

When you violate DRY, bugs and maintenance problems are sure to follow. Duplicated code has a tendency to both continue to replicate and also to diverge (leaving bugs as two similar implementations differ in subtle ways).

Tuning

This issue has a mass of 100.

We set useful threshold defaults for the languages we support but you may want to adjust these settings based on your project guidelines.

The threshold configuration represents the minimum mass a code block must have to be analyzed for duplication. The lower the threshold, the more fine-grained the comparison.

If the engine is too easily reporting duplication, try raising the threshold. If you suspect that the engine isn't catching enough duplication, try lowering the threshold. The best setting tends to differ from language to language.

See codeclimate-duplication's documentation for more information about tuning the mass threshold in your .codeclimate.yml.

Refactorings

Further Reading

Similar blocks of code found in 4 locations. Consider refactoring.
Open

        if ( options.my[ 0 ] === "right" ) {
            position.left -= elemWidth;
        } else if ( options.my[ 0 ] === "center" ) {
            position.left -= elemWidth / 2;
        }
Severity: Major
Found in de.bund.bfr.knime.pmm.nodes/js-src/de/bund/bfr/knime/pmm/js/modelplotter/jquery-ui.js and 3 other locations - About 1 hr to fix
de.bund.bfr.knime.pmm.nodes/js-src/de/bund/bfr/knime/pmm/js/modelplotter/jquery-ui.js on lines 1232..1236
de.bund.bfr.knime.pmm.nodes/js-src/de/bund/bfr/knime/pmm/js/modelplotter/jquery-ui.js on lines 1238..1242
de.bund.bfr.knime.pmm.nodes/js-src/de/bund/bfr/knime/pmm/js/modelplotter/jquery-ui.js on lines 1266..1270

Duplicated Code

Duplicated code can lead to software that is hard to understand and difficult to change. The Don't Repeat Yourself (DRY) principle states:

Every piece of knowledge must have a single, unambiguous, authoritative representation within a system.

When you violate DRY, bugs and maintenance problems are sure to follow. Duplicated code has a tendency to both continue to replicate and also to diverge (leaving bugs as two similar implementations differ in subtle ways).

Tuning

This issue has a mass of 65.

We set useful threshold defaults for the languages we support but you may want to adjust these settings based on your project guidelines.

The threshold configuration represents the minimum mass a code block must have to be analyzed for duplication. The lower the threshold, the more fine-grained the comparison.

If the engine is too easily reporting duplication, try raising the threshold. If you suspect that the engine isn't catching enough duplication, try lowering the threshold. The best setting tends to differ from language to language.

See codeclimate-duplication's documentation for more information about tuning the mass threshold in your .codeclimate.yml.

Refactorings

Further Reading

Identical blocks of code found in 2 locations. Consider refactoring.
Open

    let bodyContent = `
<div class="container-fluid">
  <nav class="navbar navbar-default">
    <div class="navbar-collapse collapse">
      <ul class="nav navbar-nav" id="viewTab">
Severity: Major
Found in de.bund.bfr.knime.fsklab.deprecatednodes/js-src/de/bund/bfr/knime/fsklab/1.7.2/editor/editor.js and 1 other location - About 1 hr to fix
de.bund.bfr.knime.fsklab.deprecatednodes/js-src/de/bund/bfr/knime/fsklab/v1.9/editor/editor.js on lines 106..130

Duplicated Code

Duplicated code can lead to software that is hard to understand and difficult to change. The Don't Repeat Yourself (DRY) principle states:

Every piece of knowledge must have a single, unambiguous, authoritative representation within a system.

When you violate DRY, bugs and maintenance problems are sure to follow. Duplicated code has a tendency to both continue to replicate and also to diverge (leaving bugs as two similar implementations differ in subtle ways).

Tuning

This issue has a mass of 65.

We set useful threshold defaults for the languages we support but you may want to adjust these settings based on your project guidelines.

The threshold configuration represents the minimum mass a code block must have to be analyzed for duplication. The lower the threshold, the more fine-grained the comparison.

If the engine is too easily reporting duplication, try raising the threshold. If you suspect that the engine isn't catching enough duplication, try lowering the threshold. The best setting tends to differ from language to language.

See codeclimate-duplication's documentation for more information about tuning the mass threshold in your .codeclimate.yml.

Refactorings

Further Reading

Identical blocks of code found in 2 locations. Consider refactoring.
Open

    let bodyContent = `
<div class="container-fluid">
  <nav class="navbar navbar-default">
    <div class="navbar-collapse collapse">
      <ul class="nav navbar-nav" id="viewTab">
Severity: Major
Found in de.bund.bfr.knime.fsklab.deprecatednodes/js-src/de/bund/bfr/knime/fsklab/v1.9/editor/editor.js and 1 other location - About 1 hr to fix
de.bund.bfr.knime.fsklab.deprecatednodes/js-src/de/bund/bfr/knime/fsklab/1.7.2/editor/editor.js on lines 2663..2687

Duplicated Code

Duplicated code can lead to software that is hard to understand and difficult to change. The Don't Repeat Yourself (DRY) principle states:

Every piece of knowledge must have a single, unambiguous, authoritative representation within a system.

When you violate DRY, bugs and maintenance problems are sure to follow. Duplicated code has a tendency to both continue to replicate and also to diverge (leaving bugs as two similar implementations differ in subtle ways).

Tuning

This issue has a mass of 65.

We set useful threshold defaults for the languages we support but you may want to adjust these settings based on your project guidelines.

The threshold configuration represents the minimum mass a code block must have to be analyzed for duplication. The lower the threshold, the more fine-grained the comparison.

If the engine is too easily reporting duplication, try raising the threshold. If you suspect that the engine isn't catching enough duplication, try lowering the threshold. The best setting tends to differ from language to language.

See codeclimate-duplication's documentation for more information about tuning the mass threshold in your .codeclimate.yml.

Refactorings

Further Reading

Severity
Category
Status
Source
Language