SiLeBAT/FSK-Lab

View on GitHub

Showing 14,752 of 14,752 total issues

Identical blocks of code found in 2 locations. Consider refactoring.
Open

      if ($this.attr('aria-selected') === 'true') {
        if (self.options.get('multiple')) {
          self.trigger('unselect', {
            originalEvent: evt,
            data: data
de.bund.bfr.knime.js/src/js/lib/select2.full.js on lines 1307..1318

Duplicated Code

Duplicated code can lead to software that is hard to understand and difficult to change. The Don't Repeat Yourself (DRY) principle states:

Every piece of knowledge must have a single, unambiguous, authoritative representation within a system.

When you violate DRY, bugs and maintenance problems are sure to follow. Duplicated code has a tendency to both continue to replicate and also to diverge (leaving bugs as two similar implementations differ in subtle ways).

Tuning

This issue has a mass of 64.

We set useful threshold defaults for the languages we support but you may want to adjust these settings based on your project guidelines.

The threshold configuration represents the minimum mass a code block must have to be analyzed for duplication. The lower the threshold, the more fine-grained the comparison.

If the engine is too easily reporting duplication, try raising the threshold. If you suspect that the engine isn't catching enough duplication, try lowering the threshold. The best setting tends to differ from language to language.

See codeclimate-duplication's documentation for more information about tuning the mass threshold in your .codeclimate.yml.

Refactorings

Further Reading

Identical blocks of code found in 2 locations. Consider refactoring.
Open

    if (params && params.originalSelect2Event != null) {
      var event = params.originalSelect2Event;

      // Don't select an item if the close event was triggered from a select or
      // unselect event
de.bund.bfr.knime.js/src/js/lib/select2.full.js on lines 4743..4751

Duplicated Code

Duplicated code can lead to software that is hard to understand and difficult to change. The Don't Repeat Yourself (DRY) principle states:

Every piece of knowledge must have a single, unambiguous, authoritative representation within a system.

When you violate DRY, bugs and maintenance problems are sure to follow. Duplicated code has a tendency to both continue to replicate and also to diverge (leaving bugs as two similar implementations differ in subtle ways).

Tuning

This issue has a mass of 64.

We set useful threshold defaults for the languages we support but you may want to adjust these settings based on your project guidelines.

The threshold configuration represents the minimum mass a code block must have to be analyzed for duplication. The lower the threshold, the more fine-grained the comparison.

If the engine is too easily reporting duplication, try raising the threshold. If you suspect that the engine isn't catching enough duplication, try lowering the threshold. The best setting tends to differ from language to language.

See codeclimate-duplication's documentation for more information about tuning the mass threshold in your .codeclimate.yml.

Refactorings

Further Reading

Identical blocks of code found in 2 locations. Consider refactoring.
Open

    if (params && params.originalSelect2Event != null) {
      var event = params.originalSelect2Event;

      // Don't select an item if the close event was triggered from a select or
      // unselect event
Severity: Major
Found in de.bund.bfr.knime.js/src/js/lib/select2.full.js and 1 other location - About 1 hr to fix
de.bund.bfr.knime.pmm.nodes/js-lib/select2/4_0_3/debug/js/select2.js on lines 4410..4418

Duplicated Code

Duplicated code can lead to software that is hard to understand and difficult to change. The Don't Repeat Yourself (DRY) principle states:

Every piece of knowledge must have a single, unambiguous, authoritative representation within a system.

When you violate DRY, bugs and maintenance problems are sure to follow. Duplicated code has a tendency to both continue to replicate and also to diverge (leaving bugs as two similar implementations differ in subtle ways).

Tuning

This issue has a mass of 64.

We set useful threshold defaults for the languages we support but you may want to adjust these settings based on your project guidelines.

The threshold configuration represents the minimum mass a code block must have to be analyzed for duplication. The lower the threshold, the more fine-grained the comparison.

If the engine is too easily reporting duplication, try raising the threshold. If you suspect that the engine isn't catching enough duplication, try lowering the threshold. The best setting tends to differ from language to language.

See codeclimate-duplication's documentation for more information about tuning the mass threshold in your .codeclimate.yml.

Refactorings

Further Reading

Similar blocks of code found in 2 locations. Consider refactoring.
Open

  var ops = wordRegexp(["str", "lang", "langmatches", "datatype", "bound", "sameterm", "isiri", "isuri",
                        "iri", "uri", "bnode", "count", "sum", "min", "max", "avg", "sample",
                        "group_concat", "rand", "abs", "ceil", "floor", "round", "concat", "substr", "strlen",
                        "replace", "ucase", "lcase", "encode_for_uri", "contains", "strstarts", "strends",
                        "strbefore", "strafter", "year", "month", "day", "hours", "minutes", "seconds",
de.bund.bfr.knime.js/js-lib/codemirror-5.49.2/mode/clojure/test.js on lines 351..361

Duplicated Code

Duplicated code can lead to software that is hard to understand and difficult to change. The Don't Repeat Yourself (DRY) principle states:

Every piece of knowledge must have a single, unambiguous, authoritative representation within a system.

When you violate DRY, bugs and maintenance problems are sure to follow. Duplicated code has a tendency to both continue to replicate and also to diverge (leaving bugs as two similar implementations differ in subtle ways).

Tuning

This issue has a mass of 64.

We set useful threshold defaults for the languages we support but you may want to adjust these settings based on your project guidelines.

The threshold configuration represents the minimum mass a code block must have to be analyzed for duplication. The lower the threshold, the more fine-grained the comparison.

If the engine is too easily reporting duplication, try raising the threshold. If you suspect that the engine isn't catching enough duplication, try lowering the threshold. The best setting tends to differ from language to language.

See codeclimate-duplication's documentation for more information about tuning the mass threshold in your .codeclimate.yml.

Refactorings

Further Reading

Similar blocks of code found in 2 locations. Consider refactoring.
Open

      } else if (!state.inKeywordLine && state.allowScenario && stream.match(/(場景|场景|劇本|剧本|シナリオ|시나리오|เหตุการณ์|ಕಥಾಸಾರಾಂಶ|సన్నివేశం|ਪਟਕਥਾ|परिदृश्य|سيناريو|سناریو|תרחיש|Сценарій|Сценарио|Сценарий|Пример|Σενάριο|Tình huống|The thing of it is|Tapaus|Szenario|Swa|Stsenaarium|Skenario|Situai|Senaryo|Senario|Scenaro|Scenariusz|Scenariu|Scénario|Scenario|Scenarijus|Scenārijs|Scenarij|Scenarie|Scénář|Scenár|Primer|MISHUN|Kịch bản|Keadaan|Heave to|Forgatókönyv|Escenario|Escenari|Cenário|Cenario|Awww, look mate|Atburðarás):/)) {
        state.allowPlaceholders = false;
        state.allowSteps = true;
        state.allowBackground = false;
        state.allowMultilineArgument = false;
de.bund.bfr.knime.js/js-lib/codemirror-5.49.2/mode/gherkin/gherkin.js on lines 117..171

Duplicated Code

Duplicated code can lead to software that is hard to understand and difficult to change. The Don't Repeat Yourself (DRY) principle states:

Every piece of knowledge must have a single, unambiguous, authoritative representation within a system.

When you violate DRY, bugs and maintenance problems are sure to follow. Duplicated code has a tendency to both continue to replicate and also to diverge (leaving bugs as two similar implementations differ in subtle ways).

Tuning

This issue has a mass of 64.

We set useful threshold defaults for the languages we support but you may want to adjust these settings based on your project guidelines.

The threshold configuration represents the minimum mass a code block must have to be analyzed for duplication. The lower the threshold, the more fine-grained the comparison.

If the engine is too easily reporting duplication, try raising the threshold. If you suspect that the engine isn't catching enough duplication, try lowering the threshold. The best setting tends to differ from language to language.

See codeclimate-duplication's documentation for more information about tuning the mass threshold in your .codeclimate.yml.

Refactorings

Further Reading

Similar blocks of code found in 2 locations. Consider refactoring.
Open

    while (next = stream.next()) {
      if (next == '"' && !escaped) { state.tokenize = base; break; }
      escaped = !escaped && next == "\\";
    }
de.bund.bfr.knime.js/js-lib/codemirror-5.49.2/mode/clojure/clojure.js on lines 200..203

Duplicated Code

Duplicated code can lead to software that is hard to understand and difficult to change. The Don't Repeat Yourself (DRY) principle states:

Every piece of knowledge must have a single, unambiguous, authoritative representation within a system.

When you violate DRY, bugs and maintenance problems are sure to follow. Duplicated code has a tendency to both continue to replicate and also to diverge (leaving bugs as two similar implementations differ in subtle ways).

Tuning

This issue has a mass of 64.

We set useful threshold defaults for the languages we support but you may want to adjust these settings based on your project guidelines.

The threshold configuration represents the minimum mass a code block must have to be analyzed for duplication. The lower the threshold, the more fine-grained the comparison.

If the engine is too easily reporting duplication, try raising the threshold. If you suspect that the engine isn't catching enough duplication, try lowering the threshold. The best setting tends to differ from language to language.

See codeclimate-duplication's documentation for more information about tuning the mass threshold in your .codeclimate.yml.

Refactorings

Further Reading

Similar blocks of code found in 2 locations. Consider refactoring.
Open

      } else if (!state.inKeywordLine && state.allowBackground && stream.match(/(背景|배경|แนวคิด|ಹಿನ್ನೆಲೆ|నేపథ్యం|ਪਿਛੋਕੜ|पृष्ठभूमि|زمینه|الخلفية|רקע|Тарих|Предыстория|Предистория|Позадина|Передумова|Основа|Контекст|Кереш|Υπόβαθρο|Założenia|Yo\-ho\-ho|Tausta|Taust|Situācija|Rerefons|Pozadina|Pozadie|Pozadí|Osnova|Latar Belakang|Kontext|Konteksts|Kontekstas|Kontekst|Háttér|Hannergrond|Grundlage|Geçmiş|Fundo|Fono|First off|Dis is what went down|Dasar|Contexto|Contexte|Context|Contesto|Cenário de Fundo|Cenario de Fundo|Cefndir|Bối cảnh|Bakgrunnur|Bakgrunn|Bakgrund|Baggrund|Background|B4|Antecedents|Antecedentes|Ær|Aer|Achtergrond):/)) {
        state.allowPlaceholders = false;
        state.allowSteps = true;
        state.allowBackground = false;
        state.allowMultilineArgument = false;
de.bund.bfr.knime.js/js-lib/codemirror-5.49.2/mode/gherkin/gherkin.js on lines 142..171

Duplicated Code

Duplicated code can lead to software that is hard to understand and difficult to change. The Don't Repeat Yourself (DRY) principle states:

Every piece of knowledge must have a single, unambiguous, authoritative representation within a system.

When you violate DRY, bugs and maintenance problems are sure to follow. Duplicated code has a tendency to both continue to replicate and also to diverge (leaving bugs as two similar implementations differ in subtle ways).

Tuning

This issue has a mass of 64.

We set useful threshold defaults for the languages we support but you may want to adjust these settings based on your project guidelines.

The threshold configuration represents the minimum mass a code block must have to be analyzed for duplication. The lower the threshold, the more fine-grained the comparison.

If the engine is too easily reporting duplication, try raising the threshold. If you suspect that the engine isn't catching enough duplication, try lowering the threshold. The best setting tends to differ from language to language.

See codeclimate-duplication's documentation for more information about tuning the mass threshold in your .codeclimate.yml.

Refactorings

Further Reading

Similar blocks of code found in 2 locations. Consider refactoring.
Open

        let link = new joint.shapes.devs.Link({
          source: { id: firstNodeId, port: portIds[0] },
          target: { id: secondNodeId, port: portIds[1] }
        });
de.bund.bfr.knime.fsklab.deprecatednodes/js-src/de/bund/bfr/knime/fsklab/nodes/joiner/joiner.js on lines 2220..2229

Duplicated Code

Duplicated code can lead to software that is hard to understand and difficult to change. The Don't Repeat Yourself (DRY) principle states:

Every piece of knowledge must have a single, unambiguous, authoritative representation within a system.

When you violate DRY, bugs and maintenance problems are sure to follow. Duplicated code has a tendency to both continue to replicate and also to diverge (leaving bugs as two similar implementations differ in subtle ways).

Tuning

This issue has a mass of 64.

We set useful threshold defaults for the languages we support but you may want to adjust these settings based on your project guidelines.

The threshold configuration represents the minimum mass a code block must have to be analyzed for duplication. The lower the threshold, the more fine-grained the comparison.

If the engine is too easily reporting duplication, try raising the threshold. If you suspect that the engine isn't catching enough duplication, try lowering the threshold. The best setting tends to differ from language to language.

See codeclimate-duplication's documentation for more information about tuning the mass threshold in your .codeclimate.yml.

Refactorings

Further Reading

Similar blocks of code found in 2 locations. Consider refactoring.
Open

    stack.order = function(x) {
      if (!arguments.length) return order;
      order = typeof x === "function" ? x : d3_layout_stackOrders.get(x) || d3_layout_stackOrderDefault;
      return stack;
    };
de.bund.bfr.knime.pmm.nodes/js-src/de/bund/bfr/knime/pmm/js/modelplotter/d3.js on lines 6074..6078

Duplicated Code

Duplicated code can lead to software that is hard to understand and difficult to change. The Don't Repeat Yourself (DRY) principle states:

Every piece of knowledge must have a single, unambiguous, authoritative representation within a system.

When you violate DRY, bugs and maintenance problems are sure to follow. Duplicated code has a tendency to both continue to replicate and also to diverge (leaving bugs as two similar implementations differ in subtle ways).

Tuning

This issue has a mass of 64.

We set useful threshold defaults for the languages we support but you may want to adjust these settings based on your project guidelines.

The threshold configuration represents the minimum mass a code block must have to be analyzed for duplication. The lower the threshold, the more fine-grained the comparison.

If the engine is too easily reporting duplication, try raising the threshold. If you suspect that the engine isn't catching enough duplication, try lowering the threshold. The best setting tends to differ from language to language.

See codeclimate-duplication's documentation for more information about tuning the mass threshold in your .codeclimate.yml.

Refactorings

Further Reading

Similar blocks of code found in 2 locations. Consider refactoring.
Open

    while (next = stream.next()) {
      if (next === "\"" && !escaped) {state.tokenize = base; break;}
      escaped = !escaped && next === "\\";
    }
de.bund.bfr.knime.js/js-lib/codemirror-5.49.2/mode/commonlisp/commonlisp.js on lines 66..69

Duplicated Code

Duplicated code can lead to software that is hard to understand and difficult to change. The Don't Repeat Yourself (DRY) principle states:

Every piece of knowledge must have a single, unambiguous, authoritative representation within a system.

When you violate DRY, bugs and maintenance problems are sure to follow. Duplicated code has a tendency to both continue to replicate and also to diverge (leaving bugs as two similar implementations differ in subtle ways).

Tuning

This issue has a mass of 64.

We set useful threshold defaults for the languages we support but you may want to adjust these settings based on your project guidelines.

The threshold configuration represents the minimum mass a code block must have to be analyzed for duplication. The lower the threshold, the more fine-grained the comparison.

If the engine is too easily reporting duplication, try raising the threshold. If you suspect that the engine isn't catching enough duplication, try lowering the threshold. The best setting tends to differ from language to language.

See codeclimate-duplication's documentation for more information about tuning the mass threshold in your .codeclimate.yml.

Refactorings

Further Reading

Similar blocks of code found in 2 locations. Consider refactoring.
Open

                html.push('<td class="'+clsName.join(' ')+'"' + (tooltip ? ' title="'+tooltip+'"' : '') + '>'+prevMonth.getUTCDate() + '</td>');
de.bund.bfr.knime.pmm.nodes/js-lib/bootstrap-editable/1_5_1/debug/js/bootstrap-editable.js on lines 5446..5446

Duplicated Code

Duplicated code can lead to software that is hard to understand and difficult to change. The Don't Repeat Yourself (DRY) principle states:

Every piece of knowledge must have a single, unambiguous, authoritative representation within a system.

When you violate DRY, bugs and maintenance problems are sure to follow. Duplicated code has a tendency to both continue to replicate and also to diverge (leaving bugs as two similar implementations differ in subtle ways).

Tuning

This issue has a mass of 64.

We set useful threshold defaults for the languages we support but you may want to adjust these settings based on your project guidelines.

The threshold configuration represents the minimum mass a code block must have to be analyzed for duplication. The lower the threshold, the more fine-grained the comparison.

If the engine is too easily reporting duplication, try raising the threshold. If you suspect that the engine isn't catching enough duplication, try lowering the threshold. The best setting tends to differ from language to language.

See codeclimate-duplication's documentation for more information about tuning the mass threshold in your .codeclimate.yml.

Refactorings

Further Reading

Similar blocks of code found in 2 locations. Consider refactoring.
Open

                html.push('<td class="'+clsName.join(' ')+'"' + (tooltip ? ' title="'+tooltip+'"' : '') + '>'+prevMonth.getUTCDate() + '</td>');
de.bund.bfr.knime.fsklab.deprecatednodes/js-src/bootstrap-datepicker/1_6_4/debug/js/bootstrap-datepicker.js on lines 1041..1041

Duplicated Code

Duplicated code can lead to software that is hard to understand and difficult to change. The Don't Repeat Yourself (DRY) principle states:

Every piece of knowledge must have a single, unambiguous, authoritative representation within a system.

When you violate DRY, bugs and maintenance problems are sure to follow. Duplicated code has a tendency to both continue to replicate and also to diverge (leaving bugs as two similar implementations differ in subtle ways).

Tuning

This issue has a mass of 64.

We set useful threshold defaults for the languages we support but you may want to adjust these settings based on your project guidelines.

The threshold configuration represents the minimum mass a code block must have to be analyzed for duplication. The lower the threshold, the more fine-grained the comparison.

If the engine is too easily reporting duplication, try raising the threshold. If you suspect that the engine isn't catching enough duplication, try lowering the threshold. The best setting tends to differ from language to language.

See codeclimate-duplication's documentation for more information about tuning the mass threshold in your .codeclimate.yml.

Refactorings

Further Reading

Similar blocks of code found in 3 locations. Consider refactoring.
Open

    if (!self) {
      self = new this.constructor(obj.currentTarget, this.getDelegateOptions())
      $(obj.currentTarget).data('bs.' + this.type, self)
    }
de.bund.bfr.knime.fsklab.deprecatednodes/js-src/bootstrap/3_3_7/debug/js/bootstrap.js on lines 1407..1410
de.bund.bfr.knime.fsklab.deprecatednodes/js-src/bootstrap/3_3_7/debug/js/bootstrap.js on lines 1716..1719

Duplicated Code

Duplicated code can lead to software that is hard to understand and difficult to change. The Don't Repeat Yourself (DRY) principle states:

Every piece of knowledge must have a single, unambiguous, authoritative representation within a system.

When you violate DRY, bugs and maintenance problems are sure to follow. Duplicated code has a tendency to both continue to replicate and also to diverge (leaving bugs as two similar implementations differ in subtle ways).

Tuning

This issue has a mass of 64.

We set useful threshold defaults for the languages we support but you may want to adjust these settings based on your project guidelines.

The threshold configuration represents the minimum mass a code block must have to be analyzed for duplication. The lower the threshold, the more fine-grained the comparison.

If the engine is too easily reporting duplication, try raising the threshold. If you suspect that the engine isn't catching enough duplication, try lowering the threshold. The best setting tends to differ from language to language.

See codeclimate-duplication's documentation for more information about tuning the mass threshold in your .codeclimate.yml.

Refactorings

Further Reading

Similar blocks of code found in 2 locations. Consider refactoring.
Open

    var haveBodyParameter = [
        "->", "->>", "as->", "binding", "bound-fn", "case", "catch", "cond",
        "cond->", "cond->>", "condp", "def", "definterface", "defmethod", "defn",
        "defmacro", "defprotocol", "defrecord", "defstruct", "deftype", "do",
        "doseq", "dotimes", "doto", "extend", "extend-protocol", "extend-type",
de.bund.bfr.knime.js/js-lib/codemirror-5.49.2/mode/sparql/sparql.js on lines 21..28

Duplicated Code

Duplicated code can lead to software that is hard to understand and difficult to change. The Don't Repeat Yourself (DRY) principle states:

Every piece of knowledge must have a single, unambiguous, authoritative representation within a system.

When you violate DRY, bugs and maintenance problems are sure to follow. Duplicated code has a tendency to both continue to replicate and also to diverge (leaving bugs as two similar implementations differ in subtle ways).

Tuning

This issue has a mass of 64.

We set useful threshold defaults for the languages we support but you may want to adjust these settings based on your project guidelines.

The threshold configuration represents the minimum mass a code block must have to be analyzed for duplication. The lower the threshold, the more fine-grained the comparison.

If the engine is too easily reporting duplication, try raising the threshold. If you suspect that the engine isn't catching enough duplication, try lowering the threshold. The best setting tends to differ from language to language.

See codeclimate-duplication's documentation for more information about tuning the mass threshold in your .codeclimate.yml.

Refactorings

Further Reading

Similar blocks of code found in 3 locations. Consider refactoring.
Open

      if (!self) {
        self = new this.constructor(e.currentTarget, this.getDelegateOptions())
        $(e.currentTarget).data('bs.' + this.type, self)
      }
de.bund.bfr.knime.fsklab.deprecatednodes/js-src/bootstrap/3_3_7/debug/js/bootstrap.js on lines 1370..1373
de.bund.bfr.knime.fsklab.deprecatednodes/js-src/bootstrap/3_3_7/debug/js/bootstrap.js on lines 1407..1410

Duplicated Code

Duplicated code can lead to software that is hard to understand and difficult to change. The Don't Repeat Yourself (DRY) principle states:

Every piece of knowledge must have a single, unambiguous, authoritative representation within a system.

When you violate DRY, bugs and maintenance problems are sure to follow. Duplicated code has a tendency to both continue to replicate and also to diverge (leaving bugs as two similar implementations differ in subtle ways).

Tuning

This issue has a mass of 64.

We set useful threshold defaults for the languages we support but you may want to adjust these settings based on your project guidelines.

The threshold configuration represents the minimum mass a code block must have to be analyzed for duplication. The lower the threshold, the more fine-grained the comparison.

If the engine is too easily reporting duplication, try raising the threshold. If you suspect that the engine isn't catching enough duplication, try lowering the threshold. The best setting tends to differ from language to language.

See codeclimate-duplication's documentation for more information about tuning the mass threshold in your .codeclimate.yml.

Refactorings

Further Reading

Similar blocks of code found in 2 locations. Consider refactoring.
Open

                 var link = new joint.shapes.devs.Link({
                     source:{
                         id:firstNodeId,
                         port:portIds[0]
                     },
de.bund.bfr.knime.fsklab.deprecatednodes/js-src/de/bund/bfr/knime/fsklab/v1.9/joiner/joiner.js on lines 544..547

Duplicated Code

Duplicated code can lead to software that is hard to understand and difficult to change. The Don't Repeat Yourself (DRY) principle states:

Every piece of knowledge must have a single, unambiguous, authoritative representation within a system.

When you violate DRY, bugs and maintenance problems are sure to follow. Duplicated code has a tendency to both continue to replicate and also to diverge (leaving bugs as two similar implementations differ in subtle ways).

Tuning

This issue has a mass of 64.

We set useful threshold defaults for the languages we support but you may want to adjust these settings based on your project guidelines.

The threshold configuration represents the minimum mass a code block must have to be analyzed for duplication. The lower the threshold, the more fine-grained the comparison.

If the engine is too easily reporting duplication, try raising the threshold. If you suspect that the engine isn't catching enough duplication, try lowering the threshold. The best setting tends to differ from language to language.

See codeclimate-duplication's documentation for more information about tuning the mass threshold in your .codeclimate.yml.

Refactorings

Further Reading

Similar blocks of code found in 3 locations. Consider refactoring.
Open

    if (!self) {
      self = new this.constructor(obj.currentTarget, this.getDelegateOptions())
      $(obj.currentTarget).data('bs.' + this.type, self)
    }
de.bund.bfr.knime.fsklab.deprecatednodes/js-src/bootstrap/3_3_7/debug/js/bootstrap.js on lines 1370..1373
de.bund.bfr.knime.fsklab.deprecatednodes/js-src/bootstrap/3_3_7/debug/js/bootstrap.js on lines 1716..1719

Duplicated Code

Duplicated code can lead to software that is hard to understand and difficult to change. The Don't Repeat Yourself (DRY) principle states:

Every piece of knowledge must have a single, unambiguous, authoritative representation within a system.

When you violate DRY, bugs and maintenance problems are sure to follow. Duplicated code has a tendency to both continue to replicate and also to diverge (leaving bugs as two similar implementations differ in subtle ways).

Tuning

This issue has a mass of 64.

We set useful threshold defaults for the languages we support but you may want to adjust these settings based on your project guidelines.

The threshold configuration represents the minimum mass a code block must have to be analyzed for duplication. The lower the threshold, the more fine-grained the comparison.

If the engine is too easily reporting duplication, try raising the threshold. If you suspect that the engine isn't catching enough duplication, try lowering the threshold. The best setting tends to differ from language to language.

See codeclimate-duplication's documentation for more information about tuning the mass threshold in your .codeclimate.yml.

Refactorings

Further Reading

Similar blocks of code found in 2 locations. Consider refactoring.
Open

    stack.offset = function(x) {
      if (!arguments.length) return offset;
      offset = typeof x === "function" ? x : d3_layout_stackOffsets.get(x) || d3_layout_stackOffsetZero;
      return stack;
    };
de.bund.bfr.knime.pmm.nodes/js-src/de/bund/bfr/knime/pmm/js/modelplotter/d3.js on lines 6069..6073

Duplicated Code

Duplicated code can lead to software that is hard to understand and difficult to change. The Don't Repeat Yourself (DRY) principle states:

Every piece of knowledge must have a single, unambiguous, authoritative representation within a system.

When you violate DRY, bugs and maintenance problems are sure to follow. Duplicated code has a tendency to both continue to replicate and also to diverge (leaving bugs as two similar implementations differ in subtle ways).

Tuning

This issue has a mass of 64.

We set useful threshold defaults for the languages we support but you may want to adjust these settings based on your project guidelines.

The threshold configuration represents the minimum mass a code block must have to be analyzed for duplication. The lower the threshold, the more fine-grained the comparison.

If the engine is too easily reporting duplication, try raising the threshold. If you suspect that the engine isn't catching enough duplication, try lowering the threshold. The best setting tends to differ from language to language.

See codeclimate-duplication's documentation for more information about tuning the mass threshold in your .codeclimate.yml.

Refactorings

Further Reading

Method buttonActionPerformed has 36 lines of code (exceeds 25 allowed). Consider refactoring.
Open

    private void buttonActionPerformed(ActionEvent e) {
        //System.err.println(e);
        int index = 0;
        JButton b = ((JButton) e.getSource());
        for (;index<l1.size();index++) {

Method setModel4AgentsDef has 36 lines of code (exceeds 25 allowed). Consider refactoring.
Open

    private void setModel4AgentsDef(final String[] agentsDefStr, final double[][] agentsDefDbl) {
        Object[][] tableContent = null;
        if (agentsDefStr != null) {
            tableContent = new Object[agentsDefStr.length][5];
            for (int i=0;i<agentsDefStr.length;i++) {
Severity
Category
Status
Source
Language