Sign upLogin

SiLeBAT/FSK-Lab

View on GitHub
Star

Showing 14,752 of 14,752 total issues

Similar blocks of code found in 2 locations. Consider refactoring.
Open

    if (flowVariables.containsKey("firstModelParameters.json")) {
      String parametersString = flowVariables.get("firstModelParameters.json").getStringValue();
      m_config.joinerModelsData.firstModelParameters =
          MAPPER.readValue(parametersString, Parameter[].class);
    } else {
Severity: Major
Found in de.bund.bfr.knime.fsklab.nodes/src/de/bund/bfr/knime/fsklab/v2_0/joiner/JoinerNodeModel.java and 1 other location - About 1 hr to fix
de.bund.bfr.knime.fsklab.nodes/src/de/bund/bfr/knime/fsklab/v2_0/joiner/JoinerNodeModel.java on lines 389..399

Duplicated Code

Duplicated code can lead to software that is hard to understand and difficult to change. The Don't Repeat Yourself (DRY) principle states:

Every piece of knowledge must have a single, unambiguous, authoritative representation within a system.

When you violate DRY, bugs and maintenance problems are sure to follow. Duplicated code has a tendency to both continue to replicate and also to diverge (leaving bugs as two similar implementations differ in subtle ways).

Tuning

This issue has a mass of 82.

We set useful threshold defaults for the languages we support but you may want to adjust these settings based on your project guidelines.

The threshold configuration represents the minimum mass a code block must have to be analyzed for duplication. The lower the threshold, the more fine-grained the comparison.

If the engine is too easily reporting duplication, try raising the threshold. If you suspect that the engine isn't catching enough duplication, try lowering the threshold. The best setting tends to differ from language to language.

See codeclimate-duplication's documentation for more information about tuning the mass threshold in your .codeclimate.yml.

Refactorings

Further Reading

Similar blocks of code found in 2 locations. Consider refactoring.
Open

    if (flowVariables.containsKey("secondModelParameters.json")) {
      String parametersString = flowVariables.get("secondModelParameters.json").getStringValue();
      m_config.joinerModelsData.secondModelParameters =
          MAPPER.readValue(parametersString, Parameter[].class);
    } else {
Severity: Major
Found in de.bund.bfr.knime.fsklab.nodes/src/de/bund/bfr/knime/fsklab/v2_0/joiner/JoinerNodeModel.java and 1 other location - About 1 hr to fix
de.bund.bfr.knime.fsklab.nodes/src/de/bund/bfr/knime/fsklab/v2_0/joiner/JoinerNodeModel.java on lines 377..387

Duplicated Code

Duplicated code can lead to software that is hard to understand and difficult to change. The Don't Repeat Yourself (DRY) principle states:

Every piece of knowledge must have a single, unambiguous, authoritative representation within a system.

When you violate DRY, bugs and maintenance problems are sure to follow. Duplicated code has a tendency to both continue to replicate and also to diverge (leaving bugs as two similar implementations differ in subtle ways).

Tuning

This issue has a mass of 82.

We set useful threshold defaults for the languages we support but you may want to adjust these settings based on your project guidelines.

The threshold configuration represents the minimum mass a code block must have to be analyzed for duplication. The lower the threshold, the more fine-grained the comparison.

If the engine is too easily reporting duplication, try raising the threshold. If you suspect that the engine isn't catching enough duplication, try lowering the threshold. The best setting tends to differ from language to language.

See codeclimate-duplication's documentation for more information about tuning the mass threshold in your .codeclimate.yml.

Refactorings

Further Reading

Similar blocks of code found in 2 locations. Consider refactoring.
Open

    private boolean handleInt(PreparedStatement ps, int index, String val) throws SQLException {
        boolean nullVal = true;
        Integer iVal = getInt(val);
        if (val == null || iVal == null) {
            ps.setNull(index, java.sql.Types.INTEGER);
Severity: Major
Found in org.hsh.bfr.db/src/org/hsh/bfr/db/gui/dbtable/MyDBForm.java and 1 other location - About 1 hr to fix
org.hsh.bfr.db/src/org/hsh/bfr/db/gui/dbtable/MyDBForm.java on lines 463..474

Duplicated Code

Duplicated code can lead to software that is hard to understand and difficult to change. The Don't Repeat Yourself (DRY) principle states:

Every piece of knowledge must have a single, unambiguous, authoritative representation within a system.

When you violate DRY, bugs and maintenance problems are sure to follow. Duplicated code has a tendency to both continue to replicate and also to diverge (leaving bugs as two similar implementations differ in subtle ways).

Tuning

This issue has a mass of 82.

We set useful threshold defaults for the languages we support but you may want to adjust these settings based on your project guidelines.

The threshold configuration represents the minimum mass a code block must have to be analyzed for duplication. The lower the threshold, the more fine-grained the comparison.

If the engine is too easily reporting duplication, try raising the threshold. If you suspect that the engine isn't catching enough duplication, try lowering the threshold. The best setting tends to differ from language to language.

See codeclimate-duplication's documentation for more information about tuning the mass threshold in your .codeclimate.yml.

Refactorings

Further Reading

Similar blocks of code found in 2 locations. Consider refactoring.
Open

                    result.add(new String[] {
                            getDKSQL2(myT.getTablename(),
                                    fieldname,
                                    DBKernel.delimitL("Wiederholungen") + " > 1 AND " +
                                    DBKernel.delimitL("Wert") + " IS NOT NULL AND (" + DBKernel.delimitL("Wert_typ") + " IS NULL OR " + DBKernel.delimitL("Wert_typ") + " = 1)",
Severity: Major
Found in org.hsh.bfr.db/src/org/hsh/bfr/db/PlausibilityChecker.java and 1 other location - About 1 hr to fix
org.hsh.bfr.db/src/org/hsh/bfr/db/PlausibilityChecker.java on lines 112..122

Duplicated Code

Duplicated code can lead to software that is hard to understand and difficult to change. The Don't Repeat Yourself (DRY) principle states:

Every piece of knowledge must have a single, unambiguous, authoritative representation within a system.

When you violate DRY, bugs and maintenance problems are sure to follow. Duplicated code has a tendency to both continue to replicate and also to diverge (leaving bugs as two similar implementations differ in subtle ways).

Tuning

This issue has a mass of 82.

We set useful threshold defaults for the languages we support but you may want to adjust these settings based on your project guidelines.

The threshold configuration represents the minimum mass a code block must have to be analyzed for duplication. The lower the threshold, the more fine-grained the comparison.

If the engine is too easily reporting duplication, try raising the threshold. If you suspect that the engine isn't catching enough duplication, try lowering the threshold. The best setting tends to differ from language to language.

See codeclimate-duplication's documentation for more information about tuning the mass threshold in your .codeclimate.yml.

Refactorings

Further Reading

Similar blocks of code found in 2 locations. Consider refactoring.
Open

                    result.add(new String[] {
                            getDKSQL2(myT.getTablename(),
                                    fieldname,
                                    DBKernel.delimitL("Wiederholungen") + " IS NULL AND (" +
                                    //DBKernel.delimitL("Wert") + " IS NOT NULL AND " + DBKernel.delimitL("Wert_typ") + " IS NOT NULL AND " + DBKernel.delimitL("Wert_typ") + " > 1 OR " + es gibt leider viele Mittelwertangaben ohne die Anzahl der Wiederholungen
Severity: Major
Found in org.hsh.bfr.db/src/org/hsh/bfr/db/PlausibilityChecker.java and 1 other location - About 1 hr to fix
org.hsh.bfr.db/src/org/hsh/bfr/db/PlausibilityChecker.java on lines 123..130

Duplicated Code

Duplicated code can lead to software that is hard to understand and difficult to change. The Don't Repeat Yourself (DRY) principle states:

Every piece of knowledge must have a single, unambiguous, authoritative representation within a system.

When you violate DRY, bugs and maintenance problems are sure to follow. Duplicated code has a tendency to both continue to replicate and also to diverge (leaving bugs as two similar implementations differ in subtle ways).

Tuning

This issue has a mass of 82.

We set useful threshold defaults for the languages we support but you may want to adjust these settings based on your project guidelines.

The threshold configuration represents the minimum mass a code block must have to be analyzed for duplication. The lower the threshold, the more fine-grained the comparison.

If the engine is too easily reporting duplication, try raising the threshold. If you suspect that the engine isn't catching enough duplication, try lowering the threshold. The best setting tends to differ from language to language.

See codeclimate-duplication's documentation for more information about tuning the mass threshold in your .codeclimate.yml.

Refactorings

Further Reading

Similar blocks of code found in 2 locations. Consider refactoring.
Open

                if (columnIndex == 5) return isIndep ? (thePM.getIndepMin(rowID) == null || Double.isNaN(thePM.getIndepMin(rowID)) ? null : thePM.getIndepMin(rowID)) :
                    (thePM.getParamMin(rowID) == null || Double.isNaN(thePM.getParamMin(rowID)) ? null : thePM.getParamMin(rowID));
Severity: Major
Found in de.bund.bfr.knime.pmm.nodes/src/de/bund/bfr/knime/pmm/manualmodelconf/ui/ModelTableModel.java and 1 other location - About 1 hr to fix
de.bund.bfr.knime.pmm.nodes/src/de/bund/bfr/knime/pmm/manualmodelconf/ui/ModelTableModel.java on lines 180..181

Duplicated Code

Duplicated code can lead to software that is hard to understand and difficult to change. The Don't Repeat Yourself (DRY) principle states:

Every piece of knowledge must have a single, unambiguous, authoritative representation within a system.

When you violate DRY, bugs and maintenance problems are sure to follow. Duplicated code has a tendency to both continue to replicate and also to diverge (leaving bugs as two similar implementations differ in subtle ways).

Tuning

This issue has a mass of 82.

We set useful threshold defaults for the languages we support but you may want to adjust these settings based on your project guidelines.

The threshold configuration represents the minimum mass a code block must have to be analyzed for duplication. The lower the threshold, the more fine-grained the comparison.

If the engine is too easily reporting duplication, try raising the threshold. If you suspect that the engine isn't catching enough duplication, try lowering the threshold. The best setting tends to differ from language to language.

See codeclimate-duplication's documentation for more information about tuning the mass threshold in your .codeclimate.yml.

Refactorings

Further Reading

Similar blocks of code found in 2 locations. Consider refactoring.
Open

    private boolean handleDbl(PreparedStatement ps, int index, String val) throws SQLException {
        boolean nullVal = true;
        Double iVal = getDbl(val);
        if (val == null || iVal == null) {
            ps.setNull(index, java.sql.Types.DOUBLE);
Severity: Major
Found in org.hsh.bfr.db/src/org/hsh/bfr/db/gui/dbtable/MyDBForm.java and 1 other location - About 1 hr to fix
org.hsh.bfr.db/src/org/hsh/bfr/db/gui/dbtable/MyDBForm.java on lines 451..462

Duplicated Code

Duplicated code can lead to software that is hard to understand and difficult to change. The Don't Repeat Yourself (DRY) principle states:

Every piece of knowledge must have a single, unambiguous, authoritative representation within a system.

When you violate DRY, bugs and maintenance problems are sure to follow. Duplicated code has a tendency to both continue to replicate and also to diverge (leaving bugs as two similar implementations differ in subtle ways).

Tuning

This issue has a mass of 82.

We set useful threshold defaults for the languages we support but you may want to adjust these settings based on your project guidelines.

The threshold configuration represents the minimum mass a code block must have to be analyzed for duplication. The lower the threshold, the more fine-grained the comparison.

If the engine is too easily reporting duplication, try raising the threshold. If you suspect that the engine isn't catching enough duplication, try lowering the threshold. The best setting tends to differ from language to language.

See codeclimate-duplication's documentation for more information about tuning the mass threshold in your .codeclimate.yml.

Refactorings

Further Reading

Similar blocks of code found in 2 locations. Consider refactoring.
Open

    static {
        dep = new Dep();
        dep.name = "Value";
        dep.origname = "Value";
        dep.min = 0.0;
Severity: Major
Found in de.bund.bfr.knime.pmm.nodes.tests/src/de/bund/bfr/knime/pmm/js/common/DepTest.java and 1 other location - About 1 hr to fix
de.bund.bfr.knime.pmm.nodes.tests/src/de/bund/bfr/knime/pmm/js/common/IndepTest.java on lines 17..26

Duplicated Code

Duplicated code can lead to software that is hard to understand and difficult to change. The Don't Repeat Yourself (DRY) principle states:

Every piece of knowledge must have a single, unambiguous, authoritative representation within a system.

When you violate DRY, bugs and maintenance problems are sure to follow. Duplicated code has a tendency to both continue to replicate and also to diverge (leaving bugs as two similar implementations differ in subtle ways).

Tuning

This issue has a mass of 82.

We set useful threshold defaults for the languages we support but you may want to adjust these settings based on your project guidelines.

The threshold configuration represents the minimum mass a code block must have to be analyzed for duplication. The lower the threshold, the more fine-grained the comparison.

If the engine is too easily reporting duplication, try raising the threshold. If you suspect that the engine isn't catching enough duplication, try lowering the threshold. The best setting tends to differ from language to language.

See codeclimate-duplication's documentation for more information about tuning the mass threshold in your .codeclimate.yml.

Refactorings

Further Reading

Similar blocks of code found in 2 locations. Consider refactoring.
Open

                if (columnIndex == 6) return isIndep ? (thePM.getIndepMax(rowID) == null || Double.isNaN(thePM.getIndepMax(rowID)) ? null : thePM.getIndepMax(rowID)) :
                    (thePM.getParamMax(rowID) == null || Double.isNaN(thePM.getParamMax(rowID)) ? null : thePM.getParamMax(rowID));
Severity: Major
Found in de.bund.bfr.knime.pmm.nodes/src/de/bund/bfr/knime/pmm/manualmodelconf/ui/ModelTableModel.java and 1 other location - About 1 hr to fix
de.bund.bfr.knime.pmm.nodes/src/de/bund/bfr/knime/pmm/manualmodelconf/ui/ModelTableModel.java on lines 178..179

Duplicated Code

Duplicated code can lead to software that is hard to understand and difficult to change. The Don't Repeat Yourself (DRY) principle states:

Every piece of knowledge must have a single, unambiguous, authoritative representation within a system.

When you violate DRY, bugs and maintenance problems are sure to follow. Duplicated code has a tendency to both continue to replicate and also to diverge (leaving bugs as two similar implementations differ in subtle ways).

Tuning

This issue has a mass of 82.

We set useful threshold defaults for the languages we support but you may want to adjust these settings based on your project guidelines.

The threshold configuration represents the minimum mass a code block must have to be analyzed for duplication. The lower the threshold, the more fine-grained the comparison.

If the engine is too easily reporting duplication, try raising the threshold. If you suspect that the engine isn't catching enough duplication, try lowering the threshold. The best setting tends to differ from language to language.

See codeclimate-duplication's documentation for more information about tuning the mass threshold in your .codeclimate.yml.

Refactorings

Further Reading

Identical blocks of code found in 2 locations. Consider refactoring.
Open

        if (magnetT && magnetT.getAttribute('port-group') === 'out' &&
          magnetS && magnetS.getAttribute('port-group') === 'out' &&
          cellViewS.id === cellViewT.id)
          return false;
Severity: Major
Found in de.bund.bfr.knime.fsklab.deprecatednodes/js-src/de/bund/bfr/knime/fsklab/v1.9/joiner/joiner.js and 1 other location - About 1 hr to fix
de.bund.bfr.knime.fsklab.nodes/js-src/de/bund/bfr/knime/fsklab/v2.0/joiner/joiner.js on lines 923..926

Duplicated Code

Duplicated code can lead to software that is hard to understand and difficult to change. The Don't Repeat Yourself (DRY) principle states:

Every piece of knowledge must have a single, unambiguous, authoritative representation within a system.

When you violate DRY, bugs and maintenance problems are sure to follow. Duplicated code has a tendency to both continue to replicate and also to diverge (leaving bugs as two similar implementations differ in subtle ways).

Tuning

This issue has a mass of 59.

We set useful threshold defaults for the languages we support but you may want to adjust these settings based on your project guidelines.

The threshold configuration represents the minimum mass a code block must have to be analyzed for duplication. The lower the threshold, the more fine-grained the comparison.

If the engine is too easily reporting duplication, try raising the threshold. If you suspect that the engine isn't catching enough duplication, try lowering the threshold. The best setting tends to differ from language to language.

See codeclimate-duplication's documentation for more information about tuning the mass threshold in your .codeclimate.yml.

Refactorings

Further Reading

Identical blocks of code found in 2 locations. Consider refactoring.
Open

        if (magnetT && magnetT.getAttribute('port-group') === 'out' &&
          magnetS && magnetS.getAttribute('port-group') === 'out' &&
          cellViewS.id === cellViewT.id)
          return false;
Severity: Major
Found in de.bund.bfr.knime.fsklab.nodes/js-src/de/bund/bfr/knime/fsklab/v2.0/joiner/joiner.js and 1 other location - About 1 hr to fix
de.bund.bfr.knime.fsklab.deprecatednodes/js-src/de/bund/bfr/knime/fsklab/v1.9/joiner/joiner.js on lines 312..315

Duplicated Code

Duplicated code can lead to software that is hard to understand and difficult to change. The Don't Repeat Yourself (DRY) principle states:

Every piece of knowledge must have a single, unambiguous, authoritative representation within a system.

When you violate DRY, bugs and maintenance problems are sure to follow. Duplicated code has a tendency to both continue to replicate and also to diverge (leaving bugs as two similar implementations differ in subtle ways).

Tuning

This issue has a mass of 59.

We set useful threshold defaults for the languages we support but you may want to adjust these settings based on your project guidelines.

The threshold configuration represents the minimum mass a code block must have to be analyzed for duplication. The lower the threshold, the more fine-grained the comparison.

If the engine is too easily reporting duplication, try raising the threshold. If you suspect that the engine isn't catching enough duplication, try lowering the threshold. The best setting tends to differ from language to language.

See codeclimate-duplication's documentation for more information about tuning the mass threshold in your .codeclimate.yml.

Refactorings

Further Reading

Identical blocks of code found in 2 locations. Consider refactoring.
Open

      input.addEventListener("keyup", (event) => {
        if (event.key === "Enter") {
          input.blur();
          this.add();
        }
Severity: Major
Found in de.bund.bfr.knime.fsklab.deprecatednodes/js-src/de/bund/bfr/knime/fsklab/1.7.2/editor/editor.js and 1 other location - About 1 hr to fix
de.bund.bfr.knime.js/js-lib/bfr/fskutil_1.0.0.js on lines 131..136

Duplicated Code

Duplicated code can lead to software that is hard to understand and difficult to change. The Don't Repeat Yourself (DRY) principle states:

Every piece of knowledge must have a single, unambiguous, authoritative representation within a system.

When you violate DRY, bugs and maintenance problems are sure to follow. Duplicated code has a tendency to both continue to replicate and also to diverge (leaving bugs as two similar implementations differ in subtle ways).

Tuning

This issue has a mass of 59.

We set useful threshold defaults for the languages we support but you may want to adjust these settings based on your project guidelines.

The threshold configuration represents the minimum mass a code block must have to be analyzed for duplication. The lower the threshold, the more fine-grained the comparison.

If the engine is too easily reporting duplication, try raising the threshold. If you suspect that the engine isn't catching enough duplication, try lowering the threshold. The best setting tends to differ from language to language.

See codeclimate-duplication's documentation for more information about tuning the mass threshold in your .codeclimate.yml.

Refactorings

Further Reading

Identical blocks of code found in 2 locations. Consider refactoring.
Open

            input.addEventListener("keyup", (event) => {
                if (event.key === "Enter") {
                    input.blur();
                    this.add();
                }
Severity: Major
Found in de.bund.bfr.knime.js/js-lib/bfr/fskutil_1.0.0.js and 1 other location - About 1 hr to fix
de.bund.bfr.knime.fsklab.deprecatednodes/js-src/de/bund/bfr/knime/fsklab/1.7.2/editor/editor.js on lines 1864..1869

Duplicated Code

Duplicated code can lead to software that is hard to understand and difficult to change. The Don't Repeat Yourself (DRY) principle states:

Every piece of knowledge must have a single, unambiguous, authoritative representation within a system.

When you violate DRY, bugs and maintenance problems are sure to follow. Duplicated code has a tendency to both continue to replicate and also to diverge (leaving bugs as two similar implementations differ in subtle ways).

Tuning

This issue has a mass of 59.

We set useful threshold defaults for the languages we support but you may want to adjust these settings based on your project guidelines.

The threshold configuration represents the minimum mass a code block must have to be analyzed for duplication. The lower the threshold, the more fine-grained the comparison.

If the engine is too easily reporting duplication, try raising the threshold. If you suspect that the engine isn't catching enough duplication, try lowering the threshold. The best setting tends to differ from language to language.

See codeclimate-duplication's documentation for more information about tuning the mass threshold in your .codeclimate.yml.

Refactorings

Further Reading

Identical blocks of code found in 2 locations. Consider refactoring.
Open

    if (item._resultId == null && item.id && this.container != null) {
      item._resultId = this.generateResultId(this.container, item);
    }
Severity: Major
Found in de.bund.bfr.knime.pmm.nodes/js-lib/select2/4_0_3/debug/js/select2.js and 1 other location - About 1 hr to fix
de.bund.bfr.knime.js/src/js/lib/select2.full.js on lines 3553..3555

Duplicated Code

Duplicated code can lead to software that is hard to understand and difficult to change. The Don't Repeat Yourself (DRY) principle states:

Every piece of knowledge must have a single, unambiguous, authoritative representation within a system.

When you violate DRY, bugs and maintenance problems are sure to follow. Duplicated code has a tendency to both continue to replicate and also to diverge (leaving bugs as two similar implementations differ in subtle ways).

Tuning

This issue has a mass of 59.

We set useful threshold defaults for the languages we support but you may want to adjust these settings based on your project guidelines.

The threshold configuration represents the minimum mass a code block must have to be analyzed for duplication. The lower the threshold, the more fine-grained the comparison.

If the engine is too easily reporting duplication, try raising the threshold. If you suspect that the engine isn't catching enough duplication, try lowering the threshold. The best setting tends to differ from language to language.

See codeclimate-duplication's documentation for more information about tuning the mass threshold in your .codeclimate.yml.

Refactorings

Further Reading

Identical blocks of code found in 2 locations. Consider refactoring.
Open

    if (item._resultId == null && item.id && this.container != null) {
      item._resultId = this.generateResultId(this.container, item);
    }
Severity: Major
Found in de.bund.bfr.knime.js/src/js/lib/select2.full.js and 1 other location - About 1 hr to fix
de.bund.bfr.knime.pmm.nodes/js-lib/select2/4_0_3/debug/js/select2.js on lines 3306..3308

Duplicated Code

Duplicated code can lead to software that is hard to understand and difficult to change. The Don't Repeat Yourself (DRY) principle states:

Every piece of knowledge must have a single, unambiguous, authoritative representation within a system.

When you violate DRY, bugs and maintenance problems are sure to follow. Duplicated code has a tendency to both continue to replicate and also to diverge (leaving bugs as two similar implementations differ in subtle ways).

Tuning

This issue has a mass of 59.

We set useful threshold defaults for the languages we support but you may want to adjust these settings based on your project guidelines.

The threshold configuration represents the minimum mass a code block must have to be analyzed for duplication. The lower the threshold, the more fine-grained the comparison.

If the engine is too easily reporting duplication, try raising the threshold. If you suspect that the engine isn't catching enough duplication, try lowering the threshold. The best setting tends to differ from language to language.

See codeclimate-duplication's documentation for more information about tuning the mass threshold in your .codeclimate.yml.

Refactorings

Further Reading

Similar blocks of code found in 3 locations. Consider refactoring.
Open

            if ($type == 'string') {
              out += ' if (' + ($dataType) + ' == \'number\' || ' + ($dataType) + ' == \'boolean\') ' + ($coerced) + ' = \'\' + ' + ($data) + '; else if (' + ($data) + ' === null) ' + ($coerced) + ' = \'\'; ';
            } else if ($type == 'number' || $type == 'integer') {
              out += ' if (' + ($dataType) + ' == \'boolean\' || ' + ($data) + ' === null || (' + ($dataType) + ' == \'string\' && ' + ($data) + ' && ' + ($data) + ' == +' + ($data) + ' ';
              if ($type == 'integer') {
Severity: Major
Found in de.bund.bfr.knime.fsklab.deprecatednodes/js-src/de/bund/bfr/knime/fsklab/nodes/joiner/emfbundle/ajv.min.js and 2 other locations - About 1 hr to fix
de.bund.bfr.knime.fsklab.deprecatednodes/js-src/de/bund/bfr/knime/fsklab/nodes/joiner/emfbundle/ajv.min.js on lines 4126..4128
de.bund.bfr.knime.fsklab.deprecatednodes/js-src/de/bund/bfr/knime/fsklab/nodes/joiner/emfbundle/ajv.min.js on lines 4367..4369

Duplicated Code

Duplicated code can lead to software that is hard to understand and difficult to change. The Don't Repeat Yourself (DRY) principle states:

Every piece of knowledge must have a single, unambiguous, authoritative representation within a system.

When you violate DRY, bugs and maintenance problems are sure to follow. Duplicated code has a tendency to both continue to replicate and also to diverge (leaving bugs as two similar implementations differ in subtle ways).

Tuning

This issue has a mass of 59.

We set useful threshold defaults for the languages we support but you may want to adjust these settings based on your project guidelines.

The threshold configuration represents the minimum mass a code block must have to be analyzed for duplication. The lower the threshold, the more fine-grained the comparison.

If the engine is too easily reporting duplication, try raising the threshold. If you suspect that the engine isn't catching enough duplication, try lowering the threshold. The best setting tends to differ from language to language.

See codeclimate-duplication's documentation for more information about tuning the mass threshold in your .codeclimate.yml.

Refactorings

Further Reading

Similar blocks of code found in 2 locations. Consider refactoring.
Open

                            yth = new Date(Number(yth = UTCDate(th.getUTCFullYear(), 0, 1)) + (7 + 4 - yth.getUTCDay())%7*864e5),
Severity: Major
Found in de.bund.bfr.knime.fsklab.deprecatednodes/js-src/bootstrap-datepicker/1_6_4/debug/js/bootstrap-datepicker.js and 1 other location - About 1 hr to fix
de.bund.bfr.knime.js/src/js/lib/bootstrap-datepicker.js on lines 1011..1011

Duplicated Code

Duplicated code can lead to software that is hard to understand and difficult to change. The Don't Repeat Yourself (DRY) principle states:

Every piece of knowledge must have a single, unambiguous, authoritative representation within a system.

When you violate DRY, bugs and maintenance problems are sure to follow. Duplicated code has a tendency to both continue to replicate and also to diverge (leaving bugs as two similar implementations differ in subtle ways).

Tuning

This issue has a mass of 59.

We set useful threshold defaults for the languages we support but you may want to adjust these settings based on your project guidelines.

The threshold configuration represents the minimum mass a code block must have to be analyzed for duplication. The lower the threshold, the more fine-grained the comparison.

If the engine is too easily reporting duplication, try raising the threshold. If you suspect that the engine isn't catching enough duplication, try lowering the threshold. The best setting tends to differ from language to language.

See codeclimate-duplication's documentation for more information about tuning the mass threshold in your .codeclimate.yml.

Refactorings

Further Reading

Similar blocks of code found in 2 locations. Consider refactoring.
Open

    greatArc.target = function(_) {
      if (!arguments.length) return target;
      target = _, target_ = typeof _ === "function" ? null : _;
      return greatArc;
    };
Severity: Major
Found in de.bund.bfr.knime.pmm.nodes/js-src/de/bund/bfr/knime/pmm/js/modelplotter/d3.js and 1 other location - About 1 hr to fix
de.bund.bfr.knime.pmm.nodes/js-src/de/bund/bfr/knime/pmm/js/modelplotter/d3.js on lines 3963..3967

Duplicated Code

Duplicated code can lead to software that is hard to understand and difficult to change. The Don't Repeat Yourself (DRY) principle states:

Every piece of knowledge must have a single, unambiguous, authoritative representation within a system.

When you violate DRY, bugs and maintenance problems are sure to follow. Duplicated code has a tendency to both continue to replicate and also to diverge (leaving bugs as two similar implementations differ in subtle ways).

Tuning

This issue has a mass of 59.

We set useful threshold defaults for the languages we support but you may want to adjust these settings based on your project guidelines.

The threshold configuration represents the minimum mass a code block must have to be analyzed for duplication. The lower the threshold, the more fine-grained the comparison.

If the engine is too easily reporting duplication, try raising the threshold. If you suspect that the engine isn't catching enough duplication, try lowering the threshold. The best setting tends to differ from language to language.

See codeclimate-duplication's documentation for more information about tuning the mass threshold in your .codeclimate.yml.

Refactorings

Further Reading

Similar blocks of code found in 2 locations. Consider refactoring.
Open

    m.scale = function() {
      var v = scale.apply(m, arguments);
      return v === m ? clipAuto ? m.clipExtent(null) : m : v;
    };
Severity: Major
Found in de.bund.bfr.knime.pmm.nodes/js-src/de/bund/bfr/knime/pmm/js/modelplotter/d3.js and 1 other location - About 1 hr to fix
de.bund.bfr.knime.pmm.nodes/js-src/de/bund/bfr/knime/pmm/js/modelplotter/d3.js on lines 4099..4102

Duplicated Code

Duplicated code can lead to software that is hard to understand and difficult to change. The Don't Repeat Yourself (DRY) principle states:

Every piece of knowledge must have a single, unambiguous, authoritative representation within a system.

When you violate DRY, bugs and maintenance problems are sure to follow. Duplicated code has a tendency to both continue to replicate and also to diverge (leaving bugs as two similar implementations differ in subtle ways).

Tuning

This issue has a mass of 59.

We set useful threshold defaults for the languages we support but you may want to adjust these settings based on your project guidelines.

The threshold configuration represents the minimum mass a code block must have to be analyzed for duplication. The lower the threshold, the more fine-grained the comparison.

If the engine is too easily reporting duplication, try raising the threshold. If you suspect that the engine isn't catching enough duplication, try lowering the threshold. The best setting tends to differ from language to language.

See codeclimate-duplication's documentation for more information about tuning the mass threshold in your .codeclimate.yml.

Refactorings

Further Reading

Similar blocks of code found in 2 locations. Consider refactoring.
Open

function unescapeComponent(str, options) {
    return str && str.toString().replace(!options || !options.iri ? URI_PROTOCOL.PCT_ENCODED : IRI_PROTOCOL.PCT_ENCODED, pctDecChars);
}
Severity: Major
Found in de.bund.bfr.knime.fsklab.deprecatednodes/js-src/de/bund/bfr/knime/fsklab/nodes/joiner/emfbundle/ajv.min.js and 1 other location - About 1 hr to fix
de.bund.bfr.knime.fsklab.deprecatednodes/js-src/de/bund/bfr/knime/fsklab/nodes/joiner/emfbundle/ajv.min.js on lines 6388..6390

Duplicated Code

Duplicated code can lead to software that is hard to understand and difficult to change. The Don't Repeat Yourself (DRY) principle states:

Every piece of knowledge must have a single, unambiguous, authoritative representation within a system.

When you violate DRY, bugs and maintenance problems are sure to follow. Duplicated code has a tendency to both continue to replicate and also to diverge (leaving bugs as two similar implementations differ in subtle ways).

Tuning

This issue has a mass of 59.

We set useful threshold defaults for the languages we support but you may want to adjust these settings based on your project guidelines.

The threshold configuration represents the minimum mass a code block must have to be analyzed for duplication. The lower the threshold, the more fine-grained the comparison.

If the engine is too easily reporting duplication, try raising the threshold. If you suspect that the engine isn't catching enough duplication, try lowering the threshold. The best setting tends to differ from language to language.

See codeclimate-duplication's documentation for more information about tuning the mass threshold in your .codeclimate.yml.

Refactorings

Further Reading

Severity
Category
Status
Source
Language