Sign upLogin

SiLeBAT/FSK-Lab

View on GitHub
Star

Showing 14,752 of 14,752 total issues

Similar blocks of code found in 3 locations. Consider refactoring.
Open

        } else if (mType == MODEL_TYPE.M2) {
            container = exec.createDataContainer(SchemaFactory.createM2Schema().createSpec());
            JsM2SchemaList outModelList = getViewValue().getM2Models();
            JsM2Schema[] resultSchemaArray = outModelList.getSchemas();
            List<JsM2Schema> resultList = new ArrayList<JsM2Schema>();
Severity: Major
Found in de.bund.bfr.knime.pmm.nodes/src/de/bund/bfr/knime/pmm/js/modelplotter/modern/ModelPlotterNodeModel.java and 2 other locations - About 1 hr to fix
de.bund.bfr.knime.pmm.nodes/src/de/bund/bfr/knime/pmm/js/modelplotter/modern/ModelPlotterNodeModel.java on lines 317..326
de.bund.bfr.knime.pmm.nodes/src/de/bund/bfr/knime/pmm/js/modelplotter/modern/ModelPlotterNodeModel.java on lines 308..317

Duplicated Code

Duplicated code can lead to software that is hard to understand and difficult to change. The Don't Repeat Yourself (DRY) principle states:

Every piece of knowledge must have a single, unambiguous, authoritative representation within a system.

When you violate DRY, bugs and maintenance problems are sure to follow. Duplicated code has a tendency to both continue to replicate and also to diverge (leaving bugs as two similar implementations differ in subtle ways).

Tuning

This issue has a mass of 74.

We set useful threshold defaults for the languages we support but you may want to adjust these settings based on your project guidelines.

The threshold configuration represents the minimum mass a code block must have to be analyzed for duplication. The lower the threshold, the more fine-grained the comparison.

If the engine is too easily reporting duplication, try raising the threshold. If you suspect that the engine isn't catching enough duplication, try lowering the threshold. The best setting tends to differ from language to language.

See codeclimate-duplication's documentation for more information about tuning the mass threshold in your .codeclimate.yml.

Refactorings

Further Reading

Similar blocks of code found in 2 locations. Consider refactoring.
Open

    public void saveSettings(final NodeSettingsWO settings) {
        settings.addString(CHART_TITLE, m_chartTitle);
        settings.addBoolean(HIDE_IN_WIZARD, m_isHideInWizard);
        settings.addDouble(Y0, m_y0);
        settings.addInt(MIN_X_AXIS, m_minXAxis);
Severity: Major
Found in de.bund.bfr.knime.pmm.nodes/src/de/bund/bfr/knime/pmm/js/modelplotter/ModelPlotterViewConfig.java and 1 other location - About 1 hr to fix
de.bund.bfr.knime.fsklab.deprecatednodes/src-1_0_2/de/bund/bfr/knime/fsklab/nodes/creator/CreatorNodeSettings.java on lines 93..101

Duplicated Code

Duplicated code can lead to software that is hard to understand and difficult to change. The Don't Repeat Yourself (DRY) principle states:

Every piece of knowledge must have a single, unambiguous, authoritative representation within a system.

When you violate DRY, bugs and maintenance problems are sure to follow. Duplicated code has a tendency to both continue to replicate and also to diverge (leaving bugs as two similar implementations differ in subtle ways).

Tuning

This issue has a mass of 74.

We set useful threshold defaults for the languages we support but you may want to adjust these settings based on your project guidelines.

The threshold configuration represents the minimum mass a code block must have to be analyzed for duplication. The lower the threshold, the more fine-grained the comparison.

If the engine is too easily reporting duplication, try raising the threshold. If you suspect that the engine isn't catching enough duplication, try lowering the threshold. The best setting tends to differ from language to language.

See codeclimate-duplication's documentation for more information about tuning the mass threshold in your .codeclimate.yml.

Refactorings

Further Reading

Similar blocks of code found in 2 locations. Consider refactoring.
Open

            if (set.getAgents().containsKey(id)) {
                PmmXmlDoc agentXml = new PmmXmlDoc();
                AgentXml agent = set.getAgents().get(id);

                if (agent != null) {
Severity: Major
Found in de.bund.bfr.knime.pmm.nodes/src/de/bund/bfr/knime/pmm/microbialdataedit/MicrobialDataEditNodeModel.java and 1 other location - About 1 hr to fix
de.bund.bfr.knime.pmm.nodes/src/de/bund/bfr/knime/pmm/microbialdataedit/MicrobialDataEditNodeModel.java on lines 117..128

Duplicated Code

Duplicated code can lead to software that is hard to understand and difficult to change. The Don't Repeat Yourself (DRY) principle states:

Every piece of knowledge must have a single, unambiguous, authoritative representation within a system.

When you violate DRY, bugs and maintenance problems are sure to follow. Duplicated code has a tendency to both continue to replicate and also to diverge (leaving bugs as two similar implementations differ in subtle ways).

Tuning

This issue has a mass of 74.

We set useful threshold defaults for the languages we support but you may want to adjust these settings based on your project guidelines.

The threshold configuration represents the minimum mass a code block must have to be analyzed for duplication. The lower the threshold, the more fine-grained the comparison.

If the engine is too easily reporting duplication, try raising the threshold. If you suspect that the engine isn't catching enough duplication, try lowering the threshold. The best setting tends to differ from language to language.

See codeclimate-duplication's documentation for more information about tuning the mass threshold in your .codeclimate.yml.

Refactorings

Further Reading

Similar blocks of code found in 2 locations. Consider refactoring.
Open

            if (set.getMatrices().containsKey(id)) {
                PmmXmlDoc matrixXml = new PmmXmlDoc();
                MatrixXml matrix = set.getMatrices().get(id);

                if (matrix != null) {
Severity: Major
Found in de.bund.bfr.knime.pmm.nodes/src/de/bund/bfr/knime/pmm/microbialdataedit/MicrobialDataEditNodeModel.java and 1 other location - About 1 hr to fix
de.bund.bfr.knime.pmm.nodes/src/de/bund/bfr/knime/pmm/microbialdataedit/MicrobialDataEditNodeModel.java on lines 95..106

Duplicated Code

Duplicated code can lead to software that is hard to understand and difficult to change. The Don't Repeat Yourself (DRY) principle states:

Every piece of knowledge must have a single, unambiguous, authoritative representation within a system.

When you violate DRY, bugs and maintenance problems are sure to follow. Duplicated code has a tendency to both continue to replicate and also to diverge (leaving bugs as two similar implementations differ in subtle ways).

Tuning

This issue has a mass of 74.

We set useful threshold defaults for the languages we support but you may want to adjust these settings based on your project guidelines.

The threshold configuration represents the minimum mass a code block must have to be analyzed for duplication. The lower the threshold, the more fine-grained the comparison.

If the engine is too easily reporting duplication, try raising the threshold. If you suspect that the engine isn't catching enough duplication, try lowering the threshold. The best setting tends to differ from language to language.

See codeclimate-duplication's documentation for more information about tuning the mass threshold in your .codeclimate.yml.

Refactorings

Further Reading

Similar blocks of code found in 2 locations. Consider refactoring.
Open

    private void expertOutActionPerformed(final ItemEvent e) {
        for(int i = 0; i < n_outports; i++ ) {
            outPortDef[ i ].getParametersDef().setEnabledBase(expertOut.isSelected());
            outPortDef[ i ].getParametersDef().setEnabledUnits(expertOut.isSelected());
        }
Severity: Major
Found in de.bund.bfr.knime.foodprocess/src/de/bund/bfr/knime/foodprocess/lib/FoodProcessDef.java and 1 other location - About 1 hr to fix
de.bund.bfr.knime.foodprocess/src/de/bund/bfr/knime/foodprocess/lib/FoodProcessDef.java on lines 225..231

Duplicated Code

Duplicated code can lead to software that is hard to understand and difficult to change. The Don't Repeat Yourself (DRY) principle states:

Every piece of knowledge must have a single, unambiguous, authoritative representation within a system.

When you violate DRY, bugs and maintenance problems are sure to follow. Duplicated code has a tendency to both continue to replicate and also to diverge (leaving bugs as two similar implementations differ in subtle ways).

Tuning

This issue has a mass of 74.

We set useful threshold defaults for the languages we support but you may want to adjust these settings based on your project guidelines.

The threshold configuration represents the minimum mass a code block must have to be analyzed for duplication. The lower the threshold, the more fine-grained the comparison.

If the engine is too easily reporting duplication, try raising the threshold. If you suspect that the engine isn't catching enough duplication, try lowering the threshold. The best setting tends to differ from language to language.

See codeclimate-duplication's documentation for more information about tuning the mass threshold in your .codeclimate.yml.

Refactorings

Further Reading

Similar blocks of code found in 2 locations. Consider refactoring.
Open

    private void expertInActionPerformed(final ItemEvent e) {
        for(int i = 0; i < n_inports; i++ ) {
            inPortDef[ i ].getParametersDef().setEnabledBase(expertIn.isSelected());
            inPortDef[ i ].getParametersDef().setEnabledUnits(expertIn.isSelected());
        }
Severity: Major
Found in de.bund.bfr.knime.foodprocess/src/de/bund/bfr/knime/foodprocess/lib/FoodProcessDef.java and 1 other location - About 1 hr to fix
de.bund.bfr.knime.foodprocess/src/de/bund/bfr/knime/foodprocess/lib/FoodProcessDef.java on lines 232..238

Duplicated Code

Duplicated code can lead to software that is hard to understand and difficult to change. The Don't Repeat Yourself (DRY) principle states:

Every piece of knowledge must have a single, unambiguous, authoritative representation within a system.

When you violate DRY, bugs and maintenance problems are sure to follow. Duplicated code has a tendency to both continue to replicate and also to diverge (leaving bugs as two similar implementations differ in subtle ways).

Tuning

This issue has a mass of 74.

We set useful threshold defaults for the languages we support but you may want to adjust these settings based on your project guidelines.

The threshold configuration represents the minimum mass a code block must have to be analyzed for duplication. The lower the threshold, the more fine-grained the comparison.

If the engine is too easily reporting duplication, try raising the threshold. If you suspect that the engine isn't catching enough duplication, try lowering the threshold. The best setting tends to differ from language to language.

See codeclimate-duplication's documentation for more information about tuning the mass threshold in your .codeclimate.yml.

Refactorings

Further Reading

Similar blocks of code found in 2 locations. Consider refactoring.
Open

  public void save(final NodeSettingsWO settings) {
    settings.addString(CFG_MODEL_SCRIPT, modelScript);
    settings.addString(CFG_PARAMETERS_SCRIPT, parameterScript);
    settings.addString(CFG_VISUALIZATION_SCRIPT, visualizationScript);
    settings.addString(CFG_WORKING_DIRECTORY, workingDirectory);
Severity: Major
Found in de.bund.bfr.knime.fsklab.deprecatednodes/src-1_0_2/de/bund/bfr/knime/fsklab/nodes/creator/CreatorNodeSettings.java and 1 other location - About 1 hr to fix
de.bund.bfr.knime.pmm.nodes/src/de/bund/bfr/knime/pmm/js/modelplotter/ModelPlotterViewConfig.java on lines 232..240

Duplicated Code

Duplicated code can lead to software that is hard to understand and difficult to change. The Don't Repeat Yourself (DRY) principle states:

Every piece of knowledge must have a single, unambiguous, authoritative representation within a system.

When you violate DRY, bugs and maintenance problems are sure to follow. Duplicated code has a tendency to both continue to replicate and also to diverge (leaving bugs as two similar implementations differ in subtle ways).

Tuning

This issue has a mass of 74.

We set useful threshold defaults for the languages we support but you may want to adjust these settings based on your project guidelines.

The threshold configuration represents the minimum mass a code block must have to be analyzed for duplication. The lower the threshold, the more fine-grained the comparison.

If the engine is too easily reporting duplication, try raising the threshold. If you suspect that the engine isn't catching enough duplication, try lowering the threshold. The best setting tends to differ from language to language.

See codeclimate-duplication's documentation for more information about tuning the mass threshold in your .codeclimate.yml.

Refactorings

Further Reading

Similar blocks of code found in 2 locations. Consider refactoring.
Open

        MyTable GeschaetztesModell_Referenz = new MyTable("GeschaetztesModell_Referenz", new String[]{"GeschaetztesModell","Literatur"},
                new String[]{"INTEGER","INTEGER"},
                new String[]{null,null},
                new MyTable[]{GeschaetzteModelle,literatur},
                null,
Severity: Major
Found in org.hsh.bfr.db/src/org/hsh/bfr/db/MyDBTablesNew.java and 1 other location - About 1 hr to fix
org.hsh.bfr.db/src/org/hsh/bfr/db/MyDBTablesNew.java on lines 1490..1497

Duplicated Code

Duplicated code can lead to software that is hard to understand and difficult to change. The Don't Repeat Yourself (DRY) principle states:

Every piece of knowledge must have a single, unambiguous, authoritative representation within a system.

When you violate DRY, bugs and maintenance problems are sure to follow. Duplicated code has a tendency to both continue to replicate and also to diverge (leaving bugs as two similar implementations differ in subtle ways).

Tuning

This issue has a mass of 74.

We set useful threshold defaults for the languages we support but you may want to adjust these settings based on your project guidelines.

The threshold configuration represents the minimum mass a code block must have to be analyzed for duplication. The lower the threshold, the more fine-grained the comparison.

If the engine is too easily reporting duplication, try raising the threshold. If you suspect that the engine isn't catching enough duplication, try lowering the threshold. The best setting tends to differ from language to language.

See codeclimate-duplication's documentation for more information about tuning the mass threshold in your .codeclimate.yml.

Refactorings

Further Reading

Similar blocks of code found in 2 locations. Consider refactoring.
Open

        MyTable Modell_Referenz = new MyTable("Modell_Referenz", new String[]{"Modell","Literatur"},
                new String[]{"INTEGER","INTEGER"},
                new String[]{null,null},
                new MyTable[]{Modellkatalog,literatur},
                null,
Severity: Major
Found in org.hsh.bfr.db/src/org/hsh/bfr/db/MyDBTablesNew.java and 1 other location - About 1 hr to fix
org.hsh.bfr.db/src/org/hsh/bfr/db/MyDBTablesNew.java on lines 1522..1529

Duplicated Code

Duplicated code can lead to software that is hard to understand and difficult to change. The Don't Repeat Yourself (DRY) principle states:

Every piece of knowledge must have a single, unambiguous, authoritative representation within a system.

When you violate DRY, bugs and maintenance problems are sure to follow. Duplicated code has a tendency to both continue to replicate and also to diverge (leaving bugs as two similar implementations differ in subtle ways).

Tuning

This issue has a mass of 74.

We set useful threshold defaults for the languages we support but you may want to adjust these settings based on your project guidelines.

The threshold configuration represents the minimum mass a code block must have to be analyzed for duplication. The lower the threshold, the more fine-grained the comparison.

If the engine is too easily reporting duplication, try raising the threshold. If you suspect that the engine isn't catching enough duplication, try lowering the threshold. The best setting tends to differ from language to language.

See codeclimate-duplication's documentation for more information about tuning the mass threshold in your .codeclimate.yml.

Refactorings

Further Reading

Identical blocks of code found in 2 locations. Consider refactoring.
Open

/*
 ***************************************************************************************************
 * Copyright (c) 2017 Federal Institute for Risk Assessment (BfR), Germany
 *
 * This program is free software: you can redistribute it and/or modify it under the terms of the
Severity: Major
Found in de.bund.bfr.knime.fsklab.nodes/src/de/bund/bfr/knime/fsklab/v2_0/runner/RunnerNodeInternalSettings.java and 1 other location - About 1 hr to fix
de.bund.bfr.knime.fsklab.deprecatednodes/src-1_9_0/de/bund/bfr/knime/fsklab/v1_9/runner/RunnerNodeInternalSettings.java on lines 1..55

Duplicated Code

Duplicated code can lead to software that is hard to understand and difficult to change. The Don't Repeat Yourself (DRY) principle states:

Every piece of knowledge must have a single, unambiguous, authoritative representation within a system.

When you violate DRY, bugs and maintenance problems are sure to follow. Duplicated code has a tendency to both continue to replicate and also to diverge (leaving bugs as two similar implementations differ in subtle ways).

Tuning

This issue has a mass of 73.

We set useful threshold defaults for the languages we support but you may want to adjust these settings based on your project guidelines.

The threshold configuration represents the minimum mass a code block must have to be analyzed for duplication. The lower the threshold, the more fine-grained the comparison.

If the engine is too easily reporting duplication, try raising the threshold. If you suspect that the engine isn't catching enough duplication, try lowering the threshold. The best setting tends to differ from language to language.

See codeclimate-duplication's documentation for more information about tuning the mass threshold in your .codeclimate.yml.

Refactorings

Further Reading

Identical blocks of code found in 2 locations. Consider refactoring.
Open

    public Element toXmlElement() {
        Element ret = new Element(getElementName());

        ret.setAttribute("id", XmlHelper.getNonNull(id));
        ret.setAttribute("name", XmlHelper.getNonNull(name));
Severity: Major
Found in de.bund.bfr.knime.pmm.common/src/de/bund/bfr/knime/pmm/extendedtable/items/MatrixXml.java and 1 other location - About 1 hr to fix
de.bund.bfr.knime.pmm.common/src/de/bund/bfr/knime/pmm/extendedtable/items/AgentXml.java on lines 116..125

Duplicated Code

Duplicated code can lead to software that is hard to understand and difficult to change. The Don't Repeat Yourself (DRY) principle states:

Every piece of knowledge must have a single, unambiguous, authoritative representation within a system.

When you violate DRY, bugs and maintenance problems are sure to follow. Duplicated code has a tendency to both continue to replicate and also to diverge (leaving bugs as two similar implementations differ in subtle ways).

Tuning

This issue has a mass of 73.

We set useful threshold defaults for the languages we support but you may want to adjust these settings based on your project guidelines.

The threshold configuration represents the minimum mass a code block must have to be analyzed for duplication. The lower the threshold, the more fine-grained the comparison.

If the engine is too easily reporting duplication, try raising the threshold. If you suspect that the engine isn't catching enough duplication, try lowering the threshold. The best setting tends to differ from language to language.

See codeclimate-duplication's documentation for more information about tuning the mass threshold in your .codeclimate.yml.

Refactorings

Further Reading

Identical blocks of code found in 2 locations. Consider refactoring.
Open

    public Element toXmlElement() {
        Element ret = new Element(getElementName());

        ret.setAttribute("id", XmlHelper.getNonNull(id));
        ret.setAttribute("name", XmlHelper.getNonNull(name));
Severity: Major
Found in de.bund.bfr.knime.pmm.common/src/de/bund/bfr/knime/pmm/extendedtable/items/AgentXml.java and 1 other location - About 1 hr to fix
de.bund.bfr.knime.pmm.common/src/de/bund/bfr/knime/pmm/extendedtable/items/MatrixXml.java on lines 105..114

Duplicated Code

Duplicated code can lead to software that is hard to understand and difficult to change. The Don't Repeat Yourself (DRY) principle states:

Every piece of knowledge must have a single, unambiguous, authoritative representation within a system.

When you violate DRY, bugs and maintenance problems are sure to follow. Duplicated code has a tendency to both continue to replicate and also to diverge (leaving bugs as two similar implementations differ in subtle ways).

Tuning

This issue has a mass of 73.

We set useful threshold defaults for the languages we support but you may want to adjust these settings based on your project guidelines.

The threshold configuration represents the minimum mass a code block must have to be analyzed for duplication. The lower the threshold, the more fine-grained the comparison.

If the engine is too easily reporting duplication, try raising the threshold. If you suspect that the engine isn't catching enough duplication, try lowering the threshold. The best setting tends to differ from language to language.

See codeclimate-duplication's documentation for more information about tuning the mass threshold in your .codeclimate.yml.

Refactorings

Further Reading

Identical blocks of code found in 2 locations. Consider refactoring.
Open

/*
 ***************************************************************************************************
 * Copyright (c) 2017 Federal Institute for Risk Assessment (BfR), Germany
 *
 * This program is free software: you can redistribute it and/or modify it under the terms of the
Severity: Major
Found in de.bund.bfr.knime.fsklab.deprecatednodes/src-1_9_0/de/bund/bfr/knime/fsklab/v1_9/runner/RunnerNodeInternalSettings.java and 1 other location - About 1 hr to fix
de.bund.bfr.knime.fsklab.nodes/src/de/bund/bfr/knime/fsklab/v2_0/runner/RunnerNodeInternalSettings.java on lines 1..55

Duplicated Code

Duplicated code can lead to software that is hard to understand and difficult to change. The Don't Repeat Yourself (DRY) principle states:

Every piece of knowledge must have a single, unambiguous, authoritative representation within a system.

When you violate DRY, bugs and maintenance problems are sure to follow. Duplicated code has a tendency to both continue to replicate and also to diverge (leaving bugs as two similar implementations differ in subtle ways).

Tuning

This issue has a mass of 73.

We set useful threshold defaults for the languages we support but you may want to adjust these settings based on your project guidelines.

The threshold configuration represents the minimum mass a code block must have to be analyzed for duplication. The lower the threshold, the more fine-grained the comparison.

If the engine is too easily reporting duplication, try raising the threshold. If you suspect that the engine isn't catching enough duplication, try lowering the threshold. The best setting tends to differ from language to language.

See codeclimate-duplication's documentation for more information about tuning the mass threshold in your .codeclimate.yml.

Refactorings

Further Reading

Identical blocks of code found in 2 locations. Consider refactoring.
Open

    @Override
    public Element toXmlElement() {
        Element ret = new Element(ELEMENT_MATRIX);

        ret.setAttribute("id", XmlHelper.getNonNull(id));
Severity: Major
Found in de.bund.bfr.knime.pmm.common/src/de/bund/bfr/knime/pmm/common/MatrixXml.java and 1 other location - About 1 hr to fix
de.bund.bfr.knime.pmm.common/src/de/bund/bfr/knime/pmm/common/AgentXml.java on lines 81..91

Duplicated Code

Duplicated code can lead to software that is hard to understand and difficult to change. The Don't Repeat Yourself (DRY) principle states:

Every piece of knowledge must have a single, unambiguous, authoritative representation within a system.

When you violate DRY, bugs and maintenance problems are sure to follow. Duplicated code has a tendency to both continue to replicate and also to diverge (leaving bugs as two similar implementations differ in subtle ways).

Tuning

This issue has a mass of 73.

We set useful threshold defaults for the languages we support but you may want to adjust these settings based on your project guidelines.

The threshold configuration represents the minimum mass a code block must have to be analyzed for duplication. The lower the threshold, the more fine-grained the comparison.

If the engine is too easily reporting duplication, try raising the threshold. If you suspect that the engine isn't catching enough duplication, try lowering the threshold. The best setting tends to differ from language to language.

See codeclimate-duplication's documentation for more information about tuning the mass threshold in your .codeclimate.yml.

Refactorings

Further Reading

Identical blocks of code found in 2 locations. Consider refactoring.
Open

    @Override
    public Element toXmlElement() {
        Element ret = new Element(ELEMENT_AGENT);

        ret.setAttribute("id", XmlHelper.getNonNull(id));
Severity: Major
Found in de.bund.bfr.knime.pmm.common/src/de/bund/bfr/knime/pmm/common/AgentXml.java and 1 other location - About 1 hr to fix
de.bund.bfr.knime.pmm.common/src/de/bund/bfr/knime/pmm/common/MatrixXml.java on lines 81..91

Duplicated Code

Duplicated code can lead to software that is hard to understand and difficult to change. The Don't Repeat Yourself (DRY) principle states:

Every piece of knowledge must have a single, unambiguous, authoritative representation within a system.

When you violate DRY, bugs and maintenance problems are sure to follow. Duplicated code has a tendency to both continue to replicate and also to diverge (leaving bugs as two similar implementations differ in subtle ways).

Tuning

This issue has a mass of 73.

We set useful threshold defaults for the languages we support but you may want to adjust these settings based on your project guidelines.

The threshold configuration represents the minimum mass a code block must have to be analyzed for duplication. The lower the threshold, the more fine-grained the comparison.

If the engine is too easily reporting duplication, try raising the threshold. If you suspect that the engine isn't catching enough duplication, try lowering the threshold. The best setting tends to differ from language to language.

See codeclimate-duplication's documentation for more information about tuning the mass threshold in your .codeclimate.yml.

Refactorings

Further Reading

Similar blocks of code found in 2 locations. Consider refactoring.
Open

    @Test
    public void testEmptyExposure() {
        
        metadata.Exposure emptyOldExposure = metadata.MetadataFactory.eINSTANCE.createExposure();
        Exposure exposure = EmfMetadataModule.convertExposure(MAPPER.valueToTree(emptyOldExposure));
Severity: Major
Found in de.bund.bfr.knime.fsklab.metadata.model.tests/src/metadata/EmfMetadataModuleTest.java and 1 other location - About 1 hr to fix
de.bund.bfr.knime.fsklab.metadata.model.tests/src/metadata/EmfMetadataModuleTest.java on lines 785..796

Duplicated Code

Duplicated code can lead to software that is hard to understand and difficult to change. The Don't Repeat Yourself (DRY) principle states:

Every piece of knowledge must have a single, unambiguous, authoritative representation within a system.

When you violate DRY, bugs and maintenance problems are sure to follow. Duplicated code has a tendency to both continue to replicate and also to diverge (leaving bugs as two similar implementations differ in subtle ways).

Tuning

This issue has a mass of 73.

We set useful threshold defaults for the languages we support but you may want to adjust these settings based on your project guidelines.

The threshold configuration represents the minimum mass a code block must have to be analyzed for duplication. The lower the threshold, the more fine-grained the comparison.

If the engine is too easily reporting duplication, try raising the threshold. If you suspect that the engine isn't catching enough duplication, try lowering the threshold. The best setting tends to differ from language to language.

See codeclimate-duplication's documentation for more information about tuning the mass threshold in your .codeclimate.yml.

Refactorings

Further Reading

Similar blocks of code found in 2 locations. Consider refactoring.
Open

    @Test
    public void testPlotSvg() throws Exception {
        
        File file = testFolder.newFile("plot.svg");
Severity: Major
Found in de.bund.bfr.knime.fsklab.nodes.common.tests/src/de/bund/bfr/knime/fsklab/nodes/plot/BasePlotterTest.java and 1 other location - About 1 hr to fix
de.bund.bfr.knime.fsklab.nodes.common.tests/src/de/bund/bfr/knime/fsklab/nodes/plot/BasePlotterTest.java on lines 20..34

Duplicated Code

Duplicated code can lead to software that is hard to understand and difficult to change. The Don't Repeat Yourself (DRY) principle states:

Every piece of knowledge must have a single, unambiguous, authoritative representation within a system.

When you violate DRY, bugs and maintenance problems are sure to follow. Duplicated code has a tendency to both continue to replicate and also to diverge (leaving bugs as two similar implementations differ in subtle ways).

Tuning

This issue has a mass of 73.

We set useful threshold defaults for the languages we support but you may want to adjust these settings based on your project guidelines.

The threshold configuration represents the minimum mass a code block must have to be analyzed for duplication. The lower the threshold, the more fine-grained the comparison.

If the engine is too easily reporting duplication, try raising the threshold. If you suspect that the engine isn't catching enough duplication, try lowering the threshold. The best setting tends to differ from language to language.

See codeclimate-duplication's documentation for more information about tuning the mass threshold in your .codeclimate.yml.

Refactorings

Further Reading

Similar blocks of code found in 2 locations. Consider refactoring.
Open

    @Test
    public void testPlotPng() throws Exception {
        
        File file = testFolder.newFile("plot.png");
Severity: Major
Found in de.bund.bfr.knime.fsklab.nodes.common.tests/src/de/bund/bfr/knime/fsklab/nodes/plot/BasePlotterTest.java and 1 other location - About 1 hr to fix
de.bund.bfr.knime.fsklab.nodes.common.tests/src/de/bund/bfr/knime/fsklab/nodes/plot/BasePlotterTest.java on lines 36..50

Duplicated Code

Duplicated code can lead to software that is hard to understand and difficult to change. The Don't Repeat Yourself (DRY) principle states:

Every piece of knowledge must have a single, unambiguous, authoritative representation within a system.

When you violate DRY, bugs and maintenance problems are sure to follow. Duplicated code has a tendency to both continue to replicate and also to diverge (leaving bugs as two similar implementations differ in subtle ways).

Tuning

This issue has a mass of 73.

We set useful threshold defaults for the languages we support but you may want to adjust these settings based on your project guidelines.

The threshold configuration represents the minimum mass a code block must have to be analyzed for duplication. The lower the threshold, the more fine-grained the comparison.

If the engine is too easily reporting duplication, try raising the threshold. If you suspect that the engine isn't catching enough duplication, try lowering the threshold. The best setting tends to differ from language to language.

See codeclimate-duplication's documentation for more information about tuning the mass threshold in your .codeclimate.yml.

Refactorings

Further Reading

Similar blocks of code found in 2 locations. Consider refactoring.
Open

    @Test
    public void testEmptyModelEquation() {
        
        metadata.ModelEquation emptyOldEquation = metadata.MetadataFactory.eINSTANCE.createModelEquation();
        ModelEquation equation = EmfMetadataModule.convertModelEquation(MAPPER.valueToTree(emptyOldEquation));
Severity: Major
Found in de.bund.bfr.knime.fsklab.metadata.model.tests/src/metadata/EmfMetadataModuleTest.java and 1 other location - About 1 hr to fix
de.bund.bfr.knime.fsklab.metadata.model.tests/src/metadata/EmfMetadataModuleTest.java on lines 810..821

Duplicated Code

Duplicated code can lead to software that is hard to understand and difficult to change. The Don't Repeat Yourself (DRY) principle states:

Every piece of knowledge must have a single, unambiguous, authoritative representation within a system.

When you violate DRY, bugs and maintenance problems are sure to follow. Duplicated code has a tendency to both continue to replicate and also to diverge (leaving bugs as two similar implementations differ in subtle ways).

Tuning

This issue has a mass of 73.

We set useful threshold defaults for the languages we support but you may want to adjust these settings based on your project guidelines.

The threshold configuration represents the minimum mass a code block must have to be analyzed for duplication. The lower the threshold, the more fine-grained the comparison.

If the engine is too easily reporting duplication, try raising the threshold. If you suspect that the engine isn't catching enough duplication, try lowering the threshold. The best setting tends to differ from language to language.

See codeclimate-duplication's documentation for more information about tuning the mass threshold in your .codeclimate.yml.

Refactorings

Further Reading

Similar blocks of code found in 2 locations. Consider refactoring.
Open

        private Map<String, String> getInitMap() {
            Map<String, String> parameterMap = new LinkedHashMap<>();

            for (String id : ids) {
                if (!initBoxes.get(id).getSelectedItem().equals(NO_PARAM)) {
Severity: Major
Found in de.bund.bfr.knime.pmm.nodes/src/de/bund/bfr/knime/pmm/predictorview/PredictorViewNodeDialog.java and 1 other location - About 1 hr to fix
de.bund.bfr.knime.pmm.nodes/src/de/bund/bfr/knime/pmm/predictorview/PredictorViewNodeDialog.java on lines 846..859

Duplicated Code

Duplicated code can lead to software that is hard to understand and difficult to change. The Don't Repeat Yourself (DRY) principle states:

Every piece of knowledge must have a single, unambiguous, authoritative representation within a system.

When you violate DRY, bugs and maintenance problems are sure to follow. Duplicated code has a tendency to both continue to replicate and also to diverge (leaving bugs as two similar implementations differ in subtle ways).

Tuning

This issue has a mass of 73.

We set useful threshold defaults for the languages we support but you may want to adjust these settings based on your project guidelines.

The threshold configuration represents the minimum mass a code block must have to be analyzed for duplication. The lower the threshold, the more fine-grained the comparison.

If the engine is too easily reporting duplication, try raising the threshold. If you suspect that the engine isn't catching enough duplication, try lowering the threshold. The best setting tends to differ from language to language.

See codeclimate-duplication's documentation for more information about tuning the mass threshold in your .codeclimate.yml.

Refactorings

Further Reading

Severity
Category
Status
Source
Language