Sign upLogin

SiLeBAT/FSK-Lab

View on GitHub
Star

Showing 14,752 of 14,752 total issues

Identical blocks of code found in 2 locations. Consider refactoring.
Open

  private static int getNumberOfSuffixes(List<Parameter> params) {

    int maxNumber = 0;
    for (Parameter param : params) {
Severity: Major
Found in de.bund.bfr.knime.fsklab.nodes/src/de/bund/bfr/knime/fsklab/v2_0/reader/ReaderNodeUtil.java and 1 other location - About 1 hr to fix
de.bund.bfr.knime.fsklab.deprecatednodes/src-1_9_0/de/bund/bfr/knime/fsklab/v1_9/reader/ReaderNodeUtil.java on lines 221..236

Duplicated Code

Duplicated code can lead to software that is hard to understand and difficult to change. The Don't Repeat Yourself (DRY) principle states:

Every piece of knowledge must have a single, unambiguous, authoritative representation within a system.

When you violate DRY, bugs and maintenance problems are sure to follow. Duplicated code has a tendency to both continue to replicate and also to diverge (leaving bugs as two similar implementations differ in subtle ways).

Tuning

This issue has a mass of 70.

We set useful threshold defaults for the languages we support but you may want to adjust these settings based on your project guidelines.

The threshold configuration represents the minimum mass a code block must have to be analyzed for duplication. The lower the threshold, the more fine-grained the comparison.

If the engine is too easily reporting duplication, try raising the threshold. If you suspect that the engine isn't catching enough duplication, try lowering the threshold. The best setting tends to differ from language to language.

See codeclimate-duplication's documentation for more information about tuning the mass threshold in your .codeclimate.yml.

Refactorings

Further Reading

Identical blocks of code found in 2 locations. Consider refactoring.
Open

        for (KnimeTuple tuple : tuples) {
            CatalogModelXml modelXml = (CatalogModelXml) tuple.getPmmXml(
                    Model1Schema.ATT_MODELCATALOG).get(0);

            if (!tuplesByPrimID.containsKey(modelXml.id)) {
Severity: Major
Found in de.bund.bfr.knime.pmm.nodes/src/de/bund/bfr/knime/pmm/fittedparameterview/TableReader.java and 1 other location - About 1 hr to fix
de.bund.bfr.knime.pmm.nodes/src/de/bund/bfr/knime/pmm/modelanddatajoiner/SecondaryJoiner.java on lines 334..345

Duplicated Code

Duplicated code can lead to software that is hard to understand and difficult to change. The Don't Repeat Yourself (DRY) principle states:

Every piece of knowledge must have a single, unambiguous, authoritative representation within a system.

When you violate DRY, bugs and maintenance problems are sure to follow. Duplicated code has a tendency to both continue to replicate and also to diverge (leaving bugs as two similar implementations differ in subtle ways).

Tuning

This issue has a mass of 70.

We set useful threshold defaults for the languages we support but you may want to adjust these settings based on your project guidelines.

The threshold configuration represents the minimum mass a code block must have to be analyzed for duplication. The lower the threshold, the more fine-grained the comparison.

If the engine is too easily reporting duplication, try raising the threshold. If you suspect that the engine isn't catching enough duplication, try lowering the threshold. The best setting tends to differ from language to language.

See codeclimate-duplication's documentation for more information about tuning the mass threshold in your .codeclimate.yml.

Refactorings

Further Reading

Similar blocks of code found in 2 locations. Consider refactoring.
Open

                if (varMap.containsKey(dep)) {
                    dx = new DepXml(varMap.get(dep), result.getString("DepCategory2"), result.getString("DepUnit2"));
                    dx.name = dep;
                }
                else {
Severity: Major
Found in de.bund.bfr.knime.pmm.nodes/src/de/bund/bfr/knime/pmm/estimatedmodelreader/EstimatedModelReaderNodeModel.java and 1 other location - About 1 hr to fix
de.bund.bfr.knime.pmm.nodes/src/de/bund/bfr/knime/pmm/estimatedmodelreader/EstimatedModelReaderNodeModel.java on lines 308..314

Duplicated Code

Duplicated code can lead to software that is hard to understand and difficult to change. The Don't Repeat Yourself (DRY) principle states:

Every piece of knowledge must have a single, unambiguous, authoritative representation within a system.

When you violate DRY, bugs and maintenance problems are sure to follow. Duplicated code has a tendency to both continue to replicate and also to diverge (leaving bugs as two similar implementations differ in subtle ways).

Tuning

This issue has a mass of 70.

We set useful threshold defaults for the languages we support but you may want to adjust these settings based on your project guidelines.

The threshold configuration represents the minimum mass a code block must have to be analyzed for duplication. The lower the threshold, the more fine-grained the comparison.

If the engine is too easily reporting duplication, try raising the threshold. If you suspect that the engine isn't catching enough duplication, try lowering the threshold. The best setting tends to differ from language to language.

See codeclimate-duplication's documentation for more information about tuning the mass threshold in your .codeclimate.yml.

Refactorings

Further Reading

Similar blocks of code found in 2 locations. Consider refactoring.
Open

      if (representation.getSecondModelParameters() == null && secondInputPort != null) {
        List<Parameter> secondModelParams = SwaggerUtil.getParameter(secondInputPort.modelMetadata);
        if (secondModelParams != null && !secondModelParams.isEmpty()) {
          representation.setSecondModelParameters(
              secondModelParams.toArray(new Parameter[secondModelParams.size()]));
Severity: Major
Found in de.bund.bfr.knime.fsklab.deprecatednodes/src-1_9_0/de/bund/bfr/knime/fsklab/v1_9/joiner/JoinerNodeModel.java and 1 other location - About 1 hr to fix
de.bund.bfr.knime.fsklab.deprecatednodes/src-1_9_0/de/bund/bfr/knime/fsklab/v1_9/joiner/JoinerNodeModel.java on lines 163..169

Duplicated Code

Duplicated code can lead to software that is hard to understand and difficult to change. The Don't Repeat Yourself (DRY) principle states:

Every piece of knowledge must have a single, unambiguous, authoritative representation within a system.

When you violate DRY, bugs and maintenance problems are sure to follow. Duplicated code has a tendency to both continue to replicate and also to diverge (leaving bugs as two similar implementations differ in subtle ways).

Tuning

This issue has a mass of 70.

We set useful threshold defaults for the languages we support but you may want to adjust these settings based on your project guidelines.

The threshold configuration represents the minimum mass a code block must have to be analyzed for duplication. The lower the threshold, the more fine-grained the comparison.

If the engine is too easily reporting duplication, try raising the threshold. If you suspect that the engine isn't catching enough duplication, try lowering the threshold. The best setting tends to differ from language to language.

See codeclimate-duplication's documentation for more information about tuning the mass threshold in your .codeclimate.yml.

Refactorings

Further Reading

Similar blocks of code found in 2 locations. Consider refactoring.
Open

        MyTable nachweisverfahren_Normen = new MyTable("Nachweisverfahren_Normen",
                new String[]{"Nachweisverfahren","Normen","Norm_Nummer"},
                new String[]{"INTEGER","INTEGER","VARCHAR(50)"},
                new String[]{null,null,null},
                new MyTable[]{nachweisverfahren,normen,null},
Severity: Major
Found in org.hsh.bfr.db/src/org/hsh/bfr/db/MyDBTablesNew.java and 1 other location - About 1 hr to fix
org.hsh.bfr.db/src/org/hsh/bfr/db/MyDBTablesNew.java on lines 797..802

Duplicated Code

Duplicated code can lead to software that is hard to understand and difficult to change. The Don't Repeat Yourself (DRY) principle states:

Every piece of knowledge must have a single, unambiguous, authoritative representation within a system.

When you violate DRY, bugs and maintenance problems are sure to follow. Duplicated code has a tendency to both continue to replicate and also to diverge (leaving bugs as two similar implementations differ in subtle ways).

Tuning

This issue has a mass of 70.

We set useful threshold defaults for the languages we support but you may want to adjust these settings based on your project guidelines.

The threshold configuration represents the minimum mass a code block must have to be analyzed for duplication. The lower the threshold, the more fine-grained the comparison.

If the engine is too easily reporting duplication, try raising the threshold. If you suspect that the engine isn't catching enough duplication, try lowering the threshold. The best setting tends to differ from language to language.

See codeclimate-duplication's documentation for more information about tuning the mass threshold in your .codeclimate.yml.

Refactorings

Further Reading

Similar blocks of code found in 2 locations. Consider refactoring.
Open

    public static List<String> getIndeps(List<KnimeTuple> tuples) {
        Set<String> indepSet = new LinkedHashSet<>();

        for (KnimeTuple tuple : tuples) {
            PmmXmlDoc indep = tuple.getPmmXml(Model1Schema.ATT_INDEPENDENT);
Severity: Major
Found in de.bund.bfr.knime.pmm.common/src/de/bund/bfr/knime/pmm/common/pmmtablemodel/PmmUtilities.java and 1 other location - About 1 hr to fix
de.bund.bfr.knime.pmm.common/src/de/bund/bfr/knime/pmm/common/pmmtablemodel/PmmUtilities.java on lines 64..73

Duplicated Code

Duplicated code can lead to software that is hard to understand and difficult to change. The Don't Repeat Yourself (DRY) principle states:

Every piece of knowledge must have a single, unambiguous, authoritative representation within a system.

When you violate DRY, bugs and maintenance problems are sure to follow. Duplicated code has a tendency to both continue to replicate and also to diverge (leaving bugs as two similar implementations differ in subtle ways).

Tuning

This issue has a mass of 70.

We set useful threshold defaults for the languages we support but you may want to adjust these settings based on your project guidelines.

The threshold configuration represents the minimum mass a code block must have to be analyzed for duplication. The lower the threshold, the more fine-grained the comparison.

If the engine is too easily reporting duplication, try raising the threshold. If you suspect that the engine isn't catching enough duplication, try lowering the threshold. The best setting tends to differ from language to language.

See codeclimate-duplication's documentation for more information about tuning the mass threshold in your .codeclimate.yml.

Refactorings

Further Reading

Similar blocks of code found in 2 locations. Consider refactoring.
Open

        MyTable aufbereitungsverfahren_Normen = new MyTable("Aufbereitungsverfahren_Normen",
                new String[]{"Aufbereitungsverfahren","Normen","Norm_Nummer"},
                new String[]{"INTEGER","INTEGER","VARCHAR(50)"},
                new String[]{null,null,null},
                new MyTable[]{aufbereitungsverfahren,normen,null},
Severity: Major
Found in org.hsh.bfr.db/src/org/hsh/bfr/db/MyDBTablesNew.java and 1 other location - About 1 hr to fix
org.hsh.bfr.db/src/org/hsh/bfr/db/MyDBTablesNew.java on lines 863..868

Duplicated Code

Duplicated code can lead to software that is hard to understand and difficult to change. The Don't Repeat Yourself (DRY) principle states:

Every piece of knowledge must have a single, unambiguous, authoritative representation within a system.

When you violate DRY, bugs and maintenance problems are sure to follow. Duplicated code has a tendency to both continue to replicate and also to diverge (leaving bugs as two similar implementations differ in subtle ways).

Tuning

This issue has a mass of 70.

We set useful threshold defaults for the languages we support but you may want to adjust these settings based on your project guidelines.

The threshold configuration represents the minimum mass a code block must have to be analyzed for duplication. The lower the threshold, the more fine-grained the comparison.

If the engine is too easily reporting duplication, try raising the threshold. If you suspect that the engine isn't catching enough duplication, try lowering the threshold. The best setting tends to differ from language to language.

See codeclimate-duplication's documentation for more information about tuning the mass threshold in your .codeclimate.yml.

Refactorings

Further Reading

Similar blocks of code found in 2 locations. Consider refactoring.
Open

                for (int i=0;i<fieldnames.length;i++) sql += (gentle && fieldVals[i] == null) ? " AND TRUE" : " AND " + DBKernel.delimitL("LD") + "(" + (fieldVals[i] == null ? "NULL" : "'" + fieldVals[i].toString().toUpperCase() + "'") + ",UCASE(CAST(" + DBKernel.delimitL(fieldnames[i]) + " AS VARCHAR(255)))) <= " + maxScores[i];
Severity: Major
Found in org.hsh.bfr.db/src/org/hsh/bfr/db/gui/actions/PlausibleAction.java and 1 other location - About 1 hr to fix
org.hsh.bfr.db/src/org/hsh/bfr/db/gui/actions/PlausibleAction.java on lines 412..412

Duplicated Code

Duplicated code can lead to software that is hard to understand and difficult to change. The Don't Repeat Yourself (DRY) principle states:

Every piece of knowledge must have a single, unambiguous, authoritative representation within a system.

When you violate DRY, bugs and maintenance problems are sure to follow. Duplicated code has a tendency to both continue to replicate and also to diverge (leaving bugs as two similar implementations differ in subtle ways).

Tuning

This issue has a mass of 70.

We set useful threshold defaults for the languages we support but you may want to adjust these settings based on your project guidelines.

The threshold configuration represents the minimum mass a code block must have to be analyzed for duplication. The lower the threshold, the more fine-grained the comparison.

If the engine is too easily reporting duplication, try raising the threshold. If you suspect that the engine isn't catching enough duplication, try lowering the threshold. The best setting tends to differ from language to language.

See codeclimate-duplication's documentation for more information about tuning the mass threshold in your .codeclimate.yml.

Refactorings

Further Reading

Similar blocks of code found in 2 locations. Consider refactoring.
Open

      if (representation.getFirstModelParameters() == null && firstInputPort != null) {
        List<Parameter> firstModelParams = SwaggerUtil.getParameter(firstInputPort.modelMetadata);
        if (firstModelParams != null && !firstModelParams.isEmpty()) {
          representation.setFirstModelParameters(
              firstModelParams.toArray(new Parameter[firstModelParams.size()]));
Severity: Major
Found in de.bund.bfr.knime.fsklab.deprecatednodes/src-1_9_0/de/bund/bfr/knime/fsklab/v1_9/joiner/JoinerNodeModel.java and 1 other location - About 1 hr to fix
de.bund.bfr.knime.fsklab.deprecatednodes/src-1_9_0/de/bund/bfr/knime/fsklab/v1_9/joiner/JoinerNodeModel.java on lines 172..178

Duplicated Code

Duplicated code can lead to software that is hard to understand and difficult to change. The Don't Repeat Yourself (DRY) principle states:

Every piece of knowledge must have a single, unambiguous, authoritative representation within a system.

When you violate DRY, bugs and maintenance problems are sure to follow. Duplicated code has a tendency to both continue to replicate and also to diverge (leaving bugs as two similar implementations differ in subtle ways).

Tuning

This issue has a mass of 70.

We set useful threshold defaults for the languages we support but you may want to adjust these settings based on your project guidelines.

The threshold configuration represents the minimum mass a code block must have to be analyzed for duplication. The lower the threshold, the more fine-grained the comparison.

If the engine is too easily reporting duplication, try raising the threshold. If you suspect that the engine isn't catching enough duplication, try lowering the threshold. The best setting tends to differ from language to language.

See codeclimate-duplication's documentation for more information about tuning the mass threshold in your .codeclimate.yml.

Refactorings

Further Reading

Similar blocks of code found in 2 locations. Consider refactoring.
Open

                if (varMap.containsKey(dep)) {
                    dx = new DepXml(varMap.get(dep), result.getString("DepCategory"), result.getString("DepUnit"));
                    dx.name = dep;
                }
                else {
Severity: Major
Found in de.bund.bfr.knime.pmm.nodes/src/de/bund/bfr/knime/pmm/estimatedmodelreader/EstimatedModelReaderNodeModel.java and 1 other location - About 1 hr to fix
de.bund.bfr.knime.pmm.nodes/src/de/bund/bfr/knime/pmm/estimatedmodelreader/EstimatedModelReaderNodeModel.java on lines 380..386

Duplicated Code

Duplicated code can lead to software that is hard to understand and difficult to change. The Don't Repeat Yourself (DRY) principle states:

Every piece of knowledge must have a single, unambiguous, authoritative representation within a system.

When you violate DRY, bugs and maintenance problems are sure to follow. Duplicated code has a tendency to both continue to replicate and also to diverge (leaving bugs as two similar implementations differ in subtle ways).

Tuning

This issue has a mass of 70.

We set useful threshold defaults for the languages we support but you may want to adjust these settings based on your project guidelines.

The threshold configuration represents the minimum mass a code block must have to be analyzed for duplication. The lower the threshold, the more fine-grained the comparison.

If the engine is too easily reporting duplication, try raising the threshold. If you suspect that the engine isn't catching enough duplication, try lowering the threshold. The best setting tends to differ from language to language.

See codeclimate-duplication's documentation for more information about tuning the mass threshold in your .codeclimate.yml.

Refactorings

Further Reading

Similar blocks of code found in 2 locations. Consider refactoring.
Open

                for (int i=0;i<fieldnames.length;i++) sql += (gentle && fieldVals[i] == null) ? ",0 AS SCORE" + i : "," + DBKernel.delimitL("LD") + "(" + (fieldVals[i] == null ? "NULL" : "'" + fieldVals[i].toString().toUpperCase() + "'") + ",UCASE(CAST(" + DBKernel.delimitL(fieldnames[i]) + " AS VARCHAR(255))))" + " AS SCORE" + i;
Severity: Major
Found in org.hsh.bfr.db/src/org/hsh/bfr/db/gui/actions/PlausibleAction.java and 1 other location - About 1 hr to fix
org.hsh.bfr.db/src/org/hsh/bfr/db/gui/actions/PlausibleAction.java on lines 414..414

Duplicated Code

Duplicated code can lead to software that is hard to understand and difficult to change. The Don't Repeat Yourself (DRY) principle states:

Every piece of knowledge must have a single, unambiguous, authoritative representation within a system.

When you violate DRY, bugs and maintenance problems are sure to follow. Duplicated code has a tendency to both continue to replicate and also to diverge (leaving bugs as two similar implementations differ in subtle ways).

Tuning

This issue has a mass of 70.

We set useful threshold defaults for the languages we support but you may want to adjust these settings based on your project guidelines.

The threshold configuration represents the minimum mass a code block must have to be analyzed for duplication. The lower the threshold, the more fine-grained the comparison.

If the engine is too easily reporting duplication, try raising the threshold. If you suspect that the engine isn't catching enough duplication, try lowering the threshold. The best setting tends to differ from language to language.

See codeclimate-duplication's documentation for more information about tuning the mass threshold in your .codeclimate.yml.

Refactorings

Further Reading

Similar blocks of code found in 2 locations. Consider refactoring.
Open

    public static List<String> getMiscParams(List<KnimeTuple> tuples) {
        Set<String> paramSet = new LinkedHashSet<>();

        for (KnimeTuple tuple : tuples) {
            PmmXmlDoc misc = tuple.getPmmXml(TimeSeriesSchema.ATT_MISC);
Severity: Major
Found in de.bund.bfr.knime.pmm.common/src/de/bund/bfr/knime/pmm/common/pmmtablemodel/PmmUtilities.java and 1 other location - About 1 hr to fix
de.bund.bfr.knime.pmm.common/src/de/bund/bfr/knime/pmm/common/pmmtablemodel/PmmUtilities.java on lines 53..62

Duplicated Code

Duplicated code can lead to software that is hard to understand and difficult to change. The Don't Repeat Yourself (DRY) principle states:

Every piece of knowledge must have a single, unambiguous, authoritative representation within a system.

When you violate DRY, bugs and maintenance problems are sure to follow. Duplicated code has a tendency to both continue to replicate and also to diverge (leaving bugs as two similar implementations differ in subtle ways).

Tuning

This issue has a mass of 70.

We set useful threshold defaults for the languages we support but you may want to adjust these settings based on your project guidelines.

The threshold configuration represents the minimum mass a code block must have to be analyzed for duplication. The lower the threshold, the more fine-grained the comparison.

If the engine is too easily reporting duplication, try raising the threshold. If you suspect that the engine isn't catching enough duplication, try lowering the threshold. The best setting tends to differ from language to language.

See codeclimate-duplication's documentation for more information about tuning the mass threshold in your .codeclimate.yml.

Refactorings

Further Reading

Identical blocks of code found in 2 locations. Consider refactoring.
Open

            if (style && style.css) {
                for (key in style.css) {
                    csses.push(key + ': ' + style.css[key]);
                }
            }
Severity: Major
Found in de.bund.bfr.knime.pmm.nodes/js-lib/bootstrap-table/1_11_1/debug/js/bootstrap-table.js and 1 other location - About 1 hr to fix
de.bund.bfr.knime.pmm.nodes/js-lib/bootstrap-table/1_11_1/debug/js/bootstrap-table.js on lines 1621..1625

Duplicated Code

Duplicated code can lead to software that is hard to understand and difficult to change. The Don't Repeat Yourself (DRY) principle states:

Every piece of knowledge must have a single, unambiguous, authoritative representation within a system.

When you violate DRY, bugs and maintenance problems are sure to follow. Duplicated code has a tendency to both continue to replicate and also to diverge (leaving bugs as two similar implementations differ in subtle ways).

Tuning

This issue has a mass of 55.

We set useful threshold defaults for the languages we support but you may want to adjust these settings based on your project guidelines.

The threshold configuration represents the minimum mass a code block must have to be analyzed for duplication. The lower the threshold, the more fine-grained the comparison.

If the engine is too easily reporting duplication, try raising the threshold. If you suspect that the engine isn't catching enough duplication, try lowering the threshold. The best setting tends to differ from language to language.

See codeclimate-duplication's documentation for more information about tuning the mass threshold in your .codeclimate.yml.

Refactorings

Further Reading

Similar blocks of code found in 3 locations. Consider refactoring.
Open

  function pass() {
    for (var i = arguments.length - 1; i >= 0; i--) cx.cc.push(arguments[i]);
  }
Severity: Major
Found in de.bund.bfr.knime.js/js-lib/codemirror-5.49.2/mode/haxe/haxe.js and 2 other locations - About 1 hr to fix
de.bund.bfr.knime.js/js-lib/codemirror-5.49.2/mode/javascript/javascript.js on lines 261..263
de.bund.bfr.knime.js/js-lib/codemirror-5.49.2/mode/tiki/tiki.js on lines 194..196

Duplicated Code

Duplicated code can lead to software that is hard to understand and difficult to change. The Don't Repeat Yourself (DRY) principle states:

Every piece of knowledge must have a single, unambiguous, authoritative representation within a system.

When you violate DRY, bugs and maintenance problems are sure to follow. Duplicated code has a tendency to both continue to replicate and also to diverge (leaving bugs as two similar implementations differ in subtle ways).

Tuning

This issue has a mass of 55.

We set useful threshold defaults for the languages we support but you may want to adjust these settings based on your project guidelines.

The threshold configuration represents the minimum mass a code block must have to be analyzed for duplication. The lower the threshold, the more fine-grained the comparison.

If the engine is too easily reporting duplication, try raising the threshold. If you suspect that the engine isn't catching enough duplication, try lowering the threshold. The best setting tends to differ from language to language.

See codeclimate-duplication's documentation for more information about tuning the mass threshold in your .codeclimate.yml.

Refactorings

Further Reading

Similar blocks of code found in 2 locations. Consider refactoring.
Open

                top = this.originalPageY + Math.round((pageY - this.originalPageY) / o.grid[1]) * o.grid[1];
Severity: Major
Found in de.bund.bfr.knime.pmm.nodes/js-src/de/bund/bfr/knime/pmm/js/modelplotter/jquery-ui.js and 1 other location - About 1 hr to fix
de.bund.bfr.knime.pmm.nodes/js-src/de/bund/bfr/knime/pmm/js/modelplotter/jquery-ui.js on lines 5608..5608

Duplicated Code

Duplicated code can lead to software that is hard to understand and difficult to change. The Don't Repeat Yourself (DRY) principle states:

Every piece of knowledge must have a single, unambiguous, authoritative representation within a system.

When you violate DRY, bugs and maintenance problems are sure to follow. Duplicated code has a tendency to both continue to replicate and also to diverge (leaving bugs as two similar implementations differ in subtle ways).

Tuning

This issue has a mass of 55.

We set useful threshold defaults for the languages we support but you may want to adjust these settings based on your project guidelines.

The threshold configuration represents the minimum mass a code block must have to be analyzed for duplication. The lower the threshold, the more fine-grained the comparison.

If the engine is too easily reporting duplication, try raising the threshold. If you suspect that the engine isn't catching enough duplication, try lowering the threshold. The best setting tends to differ from language to language.

See codeclimate-duplication's documentation for more information about tuning the mass threshold in your .codeclimate.yml.

Refactorings

Further Reading

Identical blocks of code found in 2 locations. Consider refactoring.
Open

          $it.errorPath = it.opts._errorDataPathProperty ? it.errorPath : it.util.getPathExpr(it.errorPath, $key, it.opts.jsonPointers);
Severity: Major
Found in de.bund.bfr.knime.fsklab.deprecatednodes/js-src/de/bund/bfr/knime/fsklab/nodes/joiner/emfbundle/ajv.min.js and 1 other location - About 1 hr to fix
de.bund.bfr.knime.fsklab.deprecatednodes/js-src/de/bund/bfr/knime/fsklab/nodes/joiner/emfbundle/ajv.min.js on lines 3442..3442

Duplicated Code

Duplicated code can lead to software that is hard to understand and difficult to change. The Don't Repeat Yourself (DRY) principle states:

Every piece of knowledge must have a single, unambiguous, authoritative representation within a system.

When you violate DRY, bugs and maintenance problems are sure to follow. Duplicated code has a tendency to both continue to replicate and also to diverge (leaving bugs as two similar implementations differ in subtle ways).

Tuning

This issue has a mass of 55.

We set useful threshold defaults for the languages we support but you may want to adjust these settings based on your project guidelines.

The threshold configuration represents the minimum mass a code block must have to be analyzed for duplication. The lower the threshold, the more fine-grained the comparison.

If the engine is too easily reporting duplication, try raising the threshold. If you suspect that the engine isn't catching enough duplication, try lowering the threshold. The best setting tends to differ from language to language.

See codeclimate-duplication's documentation for more information about tuning the mass threshold in your .codeclimate.yml.

Refactorings

Further Reading

Identical blocks of code found in 2 locations. Consider refactoring.
Open

            $.each($(O.panelTable._$tbody).find('tr'),function(rowindex, row){
                $(row).attr('data-row-id',rowindex);
            });
Severity: Major
Found in de.bund.bfr.knime.js/src/js/app/app.editable.mt.TablePanel.js and 1 other location - About 1 hr to fix
de.bund.bfr.knime.js/src/js/app/app.editable.mt.TablePanel.js on lines 282..284

Duplicated Code

Duplicated code can lead to software that is hard to understand and difficult to change. The Don't Repeat Yourself (DRY) principle states:

Every piece of knowledge must have a single, unambiguous, authoritative representation within a system.

When you violate DRY, bugs and maintenance problems are sure to follow. Duplicated code has a tendency to both continue to replicate and also to diverge (leaving bugs as two similar implementations differ in subtle ways).

Tuning

This issue has a mass of 55.

We set useful threshold defaults for the languages we support but you may want to adjust these settings based on your project guidelines.

The threshold configuration represents the minimum mass a code block must have to be analyzed for duplication. The lower the threshold, the more fine-grained the comparison.

If the engine is too easily reporting duplication, try raising the threshold. If you suspect that the engine isn't catching enough duplication, try lowering the threshold. The best setting tends to differ from language to language.

See codeclimate-duplication's documentation for more information about tuning the mass threshold in your .codeclimate.yml.

Refactorings

Further Reading

Similar blocks of code found in 2 locations. Consider refactoring.
Open

    function point(l) {
      return [ l[0] * view.k + view.x, l[1] * view.k + view.y ];
    }
Severity: Major
Found in de.bund.bfr.knime.pmm.nodes/js-src/de/bund/bfr/knime/pmm/js/modelplotter/d3.js and 1 other location - About 1 hr to fix
de.bund.bfr.knime.pmm.nodes/js-src/de/bund/bfr/knime/pmm/js/modelplotter/d3.js on lines 1314..1316

Duplicated Code

Duplicated code can lead to software that is hard to understand and difficult to change. The Don't Repeat Yourself (DRY) principle states:

Every piece of knowledge must have a single, unambiguous, authoritative representation within a system.

When you violate DRY, bugs and maintenance problems are sure to follow. Duplicated code has a tendency to both continue to replicate and also to diverge (leaving bugs as two similar implementations differ in subtle ways).

Tuning

This issue has a mass of 55.

We set useful threshold defaults for the languages we support but you may want to adjust these settings based on your project guidelines.

The threshold configuration represents the minimum mass a code block must have to be analyzed for duplication. The lower the threshold, the more fine-grained the comparison.

If the engine is too easily reporting duplication, try raising the threshold. If you suspect that the engine isn't catching enough duplication, try lowering the threshold. The best setting tends to differ from language to language.

See codeclimate-duplication's documentation for more information about tuning the mass threshold in your .codeclimate.yml.

Refactorings

Further Reading

Similar blocks of code found in 3 locations. Consider refactoring.
Open

  function pass() {
    for (var i = arguments.length - 1; i >= 0; i--) cx.cc.push(arguments[i]);
  }
Severity: Major
Found in de.bund.bfr.knime.js/js-lib/codemirror-5.49.2/mode/javascript/javascript.js and 2 other locations - About 1 hr to fix
de.bund.bfr.knime.js/js-lib/codemirror-5.49.2/mode/haxe/haxe.js on lines 187..189
de.bund.bfr.knime.js/js-lib/codemirror-5.49.2/mode/tiki/tiki.js on lines 194..196

Duplicated Code

Duplicated code can lead to software that is hard to understand and difficult to change. The Don't Repeat Yourself (DRY) principle states:

Every piece of knowledge must have a single, unambiguous, authoritative representation within a system.

When you violate DRY, bugs and maintenance problems are sure to follow. Duplicated code has a tendency to both continue to replicate and also to diverge (leaving bugs as two similar implementations differ in subtle ways).

Tuning

This issue has a mass of 55.

We set useful threshold defaults for the languages we support but you may want to adjust these settings based on your project guidelines.

The threshold configuration represents the minimum mass a code block must have to be analyzed for duplication. The lower the threshold, the more fine-grained the comparison.

If the engine is too easily reporting duplication, try raising the threshold. If you suspect that the engine isn't catching enough duplication, try lowering the threshold. The best setting tends to differ from language to language.

See codeclimate-duplication's documentation for more information about tuning the mass threshold in your .codeclimate.yml.

Refactorings

Further Reading

Similar blocks of code found in 2 locations. Consider refactoring.
Open

            if ( parentInstance && c === "isover" ) {
                parentInstance.isover = false;
                parentInstance.isout = true;
                parentInstance._out.call( parentInstance, event );
            }
Severity: Major
Found in de.bund.bfr.knime.pmm.nodes/js-src/de/bund/bfr/knime/pmm/js/modelplotter/jquery-ui.js and 1 other location - About 1 hr to fix
de.bund.bfr.knime.pmm.nodes/js-src/de/bund/bfr/knime/pmm/js/modelplotter/jquery-ui.js on lines 3046..3050

Duplicated Code

Duplicated code can lead to software that is hard to understand and difficult to change. The Don't Repeat Yourself (DRY) principle states:

Every piece of knowledge must have a single, unambiguous, authoritative representation within a system.

When you violate DRY, bugs and maintenance problems are sure to follow. Duplicated code has a tendency to both continue to replicate and also to diverge (leaving bugs as two similar implementations differ in subtle ways).

Tuning

This issue has a mass of 55.

We set useful threshold defaults for the languages we support but you may want to adjust these settings based on your project guidelines.

The threshold configuration represents the minimum mass a code block must have to be analyzed for duplication. The lower the threshold, the more fine-grained the comparison.

If the engine is too easily reporting duplication, try raising the threshold. If you suspect that the engine isn't catching enough duplication, try lowering the threshold. The best setting tends to differ from language to language.

See codeclimate-duplication's documentation for more information about tuning the mass threshold in your .codeclimate.yml.

Refactorings

Further Reading

Severity
Category
Status
Source
Language