Sign upLogin

SiLeBAT/FSK-Lab

View on GitHub
Star

Showing 14,752 of 14,752 total issues

Identical blocks of code found in 2 locations. Consider refactoring.
Open

        if (maxY == null) {
            parser.setVarValue(
                    paramX,
                    convertFromUnit(paramX, inverseTransform(maxX, transformX),
                            unitX));
Severity: Minor
Found in de.bund.bfr.knime.pmm.common/src/de/bund/bfr/knime/pmm/common/chart/Plotable.java and 1 other location - About 55 mins to fix
de.bund.bfr.knime.pmm.common/src/de/bund/bfr/knime/pmm/common/chart/Plotable.java on lines 1082..1095

Duplicated Code

Duplicated code can lead to software that is hard to understand and difficult to change. The Don't Repeat Yourself (DRY) principle states:

Every piece of knowledge must have a single, unambiguous, authoritative representation within a system.

When you violate DRY, bugs and maintenance problems are sure to follow. Duplicated code has a tendency to both continue to replicate and also to diverge (leaving bugs as two similar implementations differ in subtle ways).

Tuning

This issue has a mass of 66.

We set useful threshold defaults for the languages we support but you may want to adjust these settings based on your project guidelines.

The threshold configuration represents the minimum mass a code block must have to be analyzed for duplication. The lower the threshold, the more fine-grained the comparison.

If the engine is too easily reporting duplication, try raising the threshold. If you suspect that the engine isn't catching enough duplication, try lowering the threshold. The best setting tends to differ from language to language.

See codeclimate-duplication's documentation for more information about tuning the mass threshold in your .codeclimate.yml.

Refactorings

Further Reading

Similar blocks of code found in 4 locations. Consider refactoring.
Open

    if (rc.isSetCreatedDate()) {
      String dateAsString = rc.getCreatedDate();
      try {
        Date date = dateFormat.parse(dateAsString);
        template.setCreatedDate(date);
Severity: Major
Found in de.bund.bfr.knime.pmm.nodes/src/de/bund/bfr/knime/pmm/FSMRUtils.java and 3 other locations - About 55 mins to fix
de.bund.bfr.knime.pmm.nodes/src/de/bund/bfr/knime/pmm/FSMRUtils.java on lines 353..363
de.bund.bfr.knime.pmm.nodes/src/de/bund/bfr/knime/pmm/FSMRUtils.java on lines 365..375
de.bund.bfr.knime.pmm.nodes/src/de/bund/bfr/knime/pmm/FSMRUtils.java on lines 527..536

Duplicated Code

Duplicated code can lead to software that is hard to understand and difficult to change. The Don't Repeat Yourself (DRY) principle states:

Every piece of knowledge must have a single, unambiguous, authoritative representation within a system.

When you violate DRY, bugs and maintenance problems are sure to follow. Duplicated code has a tendency to both continue to replicate and also to diverge (leaving bugs as two similar implementations differ in subtle ways).

Tuning

This issue has a mass of 66.

We set useful threshold defaults for the languages we support but you may want to adjust these settings based on your project guidelines.

The threshold configuration represents the minimum mass a code block must have to be analyzed for duplication. The lower the threshold, the more fine-grained the comparison.

If the engine is too easily reporting duplication, try raising the threshold. If you suspect that the engine isn't catching enough duplication, try lowering the threshold. The best setting tends to differ from language to language.

See codeclimate-duplication's documentation for more information about tuning the mass threshold in your .codeclimate.yml.

Refactorings

Further Reading

Identical blocks of code found in 2 locations. Consider refactoring.
Open

        final ParamXml paramXml = new ParamXml(param.name, param.origName, param.isStart, param.value, param.error, param.min, param.max, param.p, param.t, param.minGuess,
                param.maxGuess, param.category, param.unit, param.description, correlations);
Severity: Minor
Found in de.bund.bfr.knime.pmm.nodes.tests/src/de/bund/bfr/knime/pmm/js/common/ParamTest.java and 1 other location - About 55 mins to fix
de.bund.bfr.knime.pmm.nodes/src/de/bund/bfr/knime/pmm/editor/ModelEditorNodeModel.java on lines 636..638

Duplicated Code

Duplicated code can lead to software that is hard to understand and difficult to change. The Don't Repeat Yourself (DRY) principle states:

Every piece of knowledge must have a single, unambiguous, authoritative representation within a system.

When you violate DRY, bugs and maintenance problems are sure to follow. Duplicated code has a tendency to both continue to replicate and also to diverge (leaving bugs as two similar implementations differ in subtle ways).

Tuning

This issue has a mass of 66.

We set useful threshold defaults for the languages we support but you may want to adjust these settings based on your project guidelines.

The threshold configuration represents the minimum mass a code block must have to be analyzed for duplication. The lower the threshold, the more fine-grained the comparison.

If the engine is too easily reporting duplication, try raising the threshold. If you suspect that the engine isn't catching enough duplication, try lowering the threshold. The best setting tends to differ from language to language.

See codeclimate-duplication's documentation for more information about tuning the mass threshold in your .codeclimate.yml.

Refactorings

Further Reading

Identical blocks of code found in 2 locations. Consider refactoring.
Open

            final ParamXml paramXml = new ParamXml(param.name, param.origName, param.isStart, param.value, param.error,
                    param.min, param.max, param.p, param.t, param.minGuess, param.maxGuess, param.category, param.unit,
                    param.description, correlations);
Severity: Minor
Found in de.bund.bfr.knime.pmm.nodes/src/de/bund/bfr/knime/pmm/editor/ModelEditorNodeModel.java and 1 other location - About 55 mins to fix
de.bund.bfr.knime.pmm.nodes.tests/src/de/bund/bfr/knime/pmm/js/common/ParamTest.java on lines 118..119

Duplicated Code

Duplicated code can lead to software that is hard to understand and difficult to change. The Don't Repeat Yourself (DRY) principle states:

Every piece of knowledge must have a single, unambiguous, authoritative representation within a system.

When you violate DRY, bugs and maintenance problems are sure to follow. Duplicated code has a tendency to both continue to replicate and also to diverge (leaving bugs as two similar implementations differ in subtle ways).

Tuning

This issue has a mass of 66.

We set useful threshold defaults for the languages we support but you may want to adjust these settings based on your project guidelines.

The threshold configuration represents the minimum mass a code block must have to be analyzed for duplication. The lower the threshold, the more fine-grained the comparison.

If the engine is too easily reporting duplication, try raising the threshold. If you suspect that the engine isn't catching enough duplication, try lowering the threshold. The best setting tends to differ from language to language.

See codeclimate-duplication's documentation for more information about tuning the mass threshold in your .codeclimate.yml.

Refactorings

Further Reading

Identical blocks of code found in 2 locations. Consider refactoring.
Open

                for (int i = 0; i < depVarData.size(); i++) {
                    if (depVarData.get(i) == null) {
                        depVarData.remove(i);

                        for (String param : miscParams) {
Severity: Minor
Found in de.bund.bfr.knime.pmm.nodes/src/de/bund/bfr/knime/pmm/secondarymodelanddataview/TableReader.java and 1 other location - About 55 mins to fix
de.bund.bfr.knime.pmm.nodes/src/de/bund/bfr/knime/pmm/secondarypredictorview/TableReader.java on lines 386..394

Duplicated Code

Duplicated code can lead to software that is hard to understand and difficult to change. The Don't Repeat Yourself (DRY) principle states:

Every piece of knowledge must have a single, unambiguous, authoritative representation within a system.

When you violate DRY, bugs and maintenance problems are sure to follow. Duplicated code has a tendency to both continue to replicate and also to diverge (leaving bugs as two similar implementations differ in subtle ways).

Tuning

This issue has a mass of 66.

We set useful threshold defaults for the languages we support but you may want to adjust these settings based on your project guidelines.

The threshold configuration represents the minimum mass a code block must have to be analyzed for duplication. The lower the threshold, the more fine-grained the comparison.

If the engine is too easily reporting duplication, try raising the threshold. If you suspect that the engine isn't catching enough duplication, try lowering the threshold. The best setting tends to differ from language to language.

See codeclimate-duplication's documentation for more information about tuning the mass threshold in your .codeclimate.yml.

Refactorings

Further Reading

Identical blocks of code found in 2 locations. Consider refactoring.
Open

                if (result.getObject(Bfrdb.ATT_PRESSURE) != null) {
                    double dbl = result.getDouble(Bfrdb.ATT_PRESSURE);
                    MiscXml mx = new MiscXml(AttributeUtilities.ATT_PRESSURE_ID, AttributeUtilities.ATT_PRESSURE, AttributeUtilities.ATT_PRESSURE, dbl,
                            null, "bar", dbuuid);
                    miscDoc.add(mx);
Severity: Minor
Found in de.bund.bfr.knime.pmm.nodes/src/de/bund/bfr/knime/pmm/estimatedmodelreader/EstimatedModelReaderNodeModel.java and 1 other location - About 55 mins to fix
de.bund.bfr.knime.pmm.nodes/src/de/bund/bfr/knime/pmm/timeseriesreader/TimeSeriesReaderNodeModel.java on lines 206..211

Duplicated Code

Duplicated code can lead to software that is hard to understand and difficult to change. The Don't Repeat Yourself (DRY) principle states:

Every piece of knowledge must have a single, unambiguous, authoritative representation within a system.

When you violate DRY, bugs and maintenance problems are sure to follow. Duplicated code has a tendency to both continue to replicate and also to diverge (leaving bugs as two similar implementations differ in subtle ways).

Tuning

This issue has a mass of 66.

We set useful threshold defaults for the languages we support but you may want to adjust these settings based on your project guidelines.

The threshold configuration represents the minimum mass a code block must have to be analyzed for duplication. The lower the threshold, the more fine-grained the comparison.

If the engine is too easily reporting duplication, try raising the threshold. If you suspect that the engine isn't catching enough duplication, try lowering the threshold. The best setting tends to differ from language to language.

See codeclimate-duplication's documentation for more information about tuning the mass threshold in your .codeclimate.yml.

Refactorings

Further Reading

Identical blocks of code found in 2 locations. Consider refactoring.
Open

            {
                buttonBar.setBorder(Borders.BUTTON_BAR_PAD);
                buttonBar.setLayout(new FormLayout(
                    "$glue, $button",
                    "pref"));
Severity: Minor
Found in org.hsh.bfr.db/src/org/hsh/bfr/db/gui/About.java and 1 other location - About 55 mins to fix
org.hsh.bfr.db/src/org/hsh/bfr/db/gui/SelectionDialog.java on lines 110..125

Duplicated Code

Duplicated code can lead to software that is hard to understand and difficult to change. The Don't Repeat Yourself (DRY) principle states:

Every piece of knowledge must have a single, unambiguous, authoritative representation within a system.

When you violate DRY, bugs and maintenance problems are sure to follow. Duplicated code has a tendency to both continue to replicate and also to diverge (leaving bugs as two similar implementations differ in subtle ways).

Tuning

This issue has a mass of 66.

We set useful threshold defaults for the languages we support but you may want to adjust these settings based on your project guidelines.

The threshold configuration represents the minimum mass a code block must have to be analyzed for duplication. The lower the threshold, the more fine-grained the comparison.

If the engine is too easily reporting duplication, try raising the threshold. If you suspect that the engine isn't catching enough duplication, try lowering the threshold. The best setting tends to differ from language to language.

See codeclimate-duplication's documentation for more information about tuning the mass threshold in your .codeclimate.yml.

Refactorings

Further Reading

Identical blocks of code found in 2 locations. Consider refactoring.
Open

    if (StringUtils.isNotBlank(nodeSettings.simulation)) {
      FskPortObject fskObjk = fskObj;
      IntStream.range(0, simulation.size())
          .filter(index -> simulation.get(index).getName().equals(nodeSettings.simulation))
          .findFirst().ifPresent(index -> reSelectSimulation(fskObjk, index));
Severity: Minor
Found in de.bund.bfr.knime.fsklab.deprecatednodes/src-1_7_2/de/bund/bfr/knime/fsklab/nodes/v1_7_2/runner/RunnerNodeModel.java and 1 other location - About 55 mins to fix
de.bund.bfr.knime.fsklab.deprecatednodes/src-1_9_0/de/bund/bfr/knime/fsklab/v1_9/runner/RunnerNodeModel.java on lines 142..147

Duplicated Code

Duplicated code can lead to software that is hard to understand and difficult to change. The Don't Repeat Yourself (DRY) principle states:

Every piece of knowledge must have a single, unambiguous, authoritative representation within a system.

When you violate DRY, bugs and maintenance problems are sure to follow. Duplicated code has a tendency to both continue to replicate and also to diverge (leaving bugs as two similar implementations differ in subtle ways).

Tuning

This issue has a mass of 66.

We set useful threshold defaults for the languages we support but you may want to adjust these settings based on your project guidelines.

The threshold configuration represents the minimum mass a code block must have to be analyzed for duplication. The lower the threshold, the more fine-grained the comparison.

If the engine is too easily reporting duplication, try raising the threshold. If you suspect that the engine isn't catching enough duplication, try lowering the threshold. The best setting tends to differ from language to language.

See codeclimate-duplication's documentation for more information about tuning the mass threshold in your .codeclimate.yml.

Refactorings

Further Reading

Similar blocks of code found in 4 locations. Consider refactoring.
Open

    if (metadata.isSetCreatedDate()) {
      String createdDateAsString = metadata.getCreatedDate();

      try {
        Date createdDate = dateFormat.parse(createdDateAsString);
Severity: Major
Found in de.bund.bfr.knime.pmm.nodes/src/de/bund/bfr/knime/pmm/FSMRUtils.java and 3 other locations - About 55 mins to fix
de.bund.bfr.knime.pmm.nodes/src/de/bund/bfr/knime/pmm/FSMRUtils.java on lines 365..375
de.bund.bfr.knime.pmm.nodes/src/de/bund/bfr/knime/pmm/FSMRUtils.java on lines 515..524
de.bund.bfr.knime.pmm.nodes/src/de/bund/bfr/knime/pmm/FSMRUtils.java on lines 527..536

Duplicated Code

Duplicated code can lead to software that is hard to understand and difficult to change. The Don't Repeat Yourself (DRY) principle states:

Every piece of knowledge must have a single, unambiguous, authoritative representation within a system.

When you violate DRY, bugs and maintenance problems are sure to follow. Duplicated code has a tendency to both continue to replicate and also to diverge (leaving bugs as two similar implementations differ in subtle ways).

Tuning

This issue has a mass of 66.

We set useful threshold defaults for the languages we support but you may want to adjust these settings based on your project guidelines.

The threshold configuration represents the minimum mass a code block must have to be analyzed for duplication. The lower the threshold, the more fine-grained the comparison.

If the engine is too easily reporting duplication, try raising the threshold. If you suspect that the engine isn't catching enough duplication, try lowering the threshold. The best setting tends to differ from language to language.

See codeclimate-duplication's documentation for more information about tuning the mass threshold in your .codeclimate.yml.

Refactorings

Further Reading

Similar blocks of code found in 4 locations. Consider refactoring.
Open

    if (rc.isSetModifiedDate()) {
      String dateAsString = rc.getModifiedDate();
      try {
        Date date = dateFormat.parse(dateAsString);
        template.setModifiedDate(date);
Severity: Major
Found in de.bund.bfr.knime.pmm.nodes/src/de/bund/bfr/knime/pmm/FSMRUtils.java and 3 other locations - About 55 mins to fix
de.bund.bfr.knime.pmm.nodes/src/de/bund/bfr/knime/pmm/FSMRUtils.java on lines 353..363
de.bund.bfr.knime.pmm.nodes/src/de/bund/bfr/knime/pmm/FSMRUtils.java on lines 365..375
de.bund.bfr.knime.pmm.nodes/src/de/bund/bfr/knime/pmm/FSMRUtils.java on lines 515..524

Duplicated Code

Duplicated code can lead to software that is hard to understand and difficult to change. The Don't Repeat Yourself (DRY) principle states:

Every piece of knowledge must have a single, unambiguous, authoritative representation within a system.

When you violate DRY, bugs and maintenance problems are sure to follow. Duplicated code has a tendency to both continue to replicate and also to diverge (leaving bugs as two similar implementations differ in subtle ways).

Tuning

This issue has a mass of 66.

We set useful threshold defaults for the languages we support but you may want to adjust these settings based on your project guidelines.

The threshold configuration represents the minimum mass a code block must have to be analyzed for duplication. The lower the threshold, the more fine-grained the comparison.

If the engine is too easily reporting duplication, try raising the threshold. If you suspect that the engine isn't catching enough duplication, try lowering the threshold. The best setting tends to differ from language to language.

See codeclimate-duplication's documentation for more information about tuning the mass threshold in your .codeclimate.yml.

Refactorings

Further Reading

Identical blocks of code found in 2 locations. Consider refactoring.
Open

                if (result.getObject(Bfrdb.ATT_PRESSURE) != null) {
                    double dbl = result.getDouble(Bfrdb.ATT_PRESSURE);
                    MiscXml mx = new MiscXml(AttributeUtilities.ATT_PRESSURE_ID, AttributeUtilities.ATT_PRESSURE, AttributeUtilities.ATT_PRESSURE, dbl,
                            null, "bar", dbuuid);
                    miscDoc.add(mx);
Severity: Minor
Found in de.bund.bfr.knime.pmm.nodes/src/de/bund/bfr/knime/pmm/timeseriesreader/TimeSeriesReaderNodeModel.java and 1 other location - About 55 mins to fix
de.bund.bfr.knime.pmm.nodes/src/de/bund/bfr/knime/pmm/estimatedmodelreader/EstimatedModelReaderNodeModel.java on lines 217..222

Duplicated Code

Duplicated code can lead to software that is hard to understand and difficult to change. The Don't Repeat Yourself (DRY) principle states:

Every piece of knowledge must have a single, unambiguous, authoritative representation within a system.

When you violate DRY, bugs and maintenance problems are sure to follow. Duplicated code has a tendency to both continue to replicate and also to diverge (leaving bugs as two similar implementations differ in subtle ways).

Tuning

This issue has a mass of 66.

We set useful threshold defaults for the languages we support but you may want to adjust these settings based on your project guidelines.

The threshold configuration represents the minimum mass a code block must have to be analyzed for duplication. The lower the threshold, the more fine-grained the comparison.

If the engine is too easily reporting duplication, try raising the threshold. If you suspect that the engine isn't catching enough duplication, try lowering the threshold. The best setting tends to differ from language to language.

See codeclimate-duplication's documentation for more information about tuning the mass threshold in your .codeclimate.yml.

Refactorings

Further Reading

Similar blocks of code found in 5 locations. Consider refactoring.
Open

        MyTable Knoten = new MyTable("Station", new String[]{"Produktkatalog","Name","Strasse","Hausnummer","Postfach","PLZ","Ort","District","Bundesland","Land","Longitude","Latitude","Ansprechpartner","Telefon","Fax","EMail","Webseite","Betriebsnummer","Betriebsart","VATnumber","Code",
                "CasePriority","AnzahlFaelle","AlterMin","AlterMax","DatumBeginn","DatumHoehepunkt","DatumEnde","Erregernachweis","Serial"},
Severity: Major
Found in org.hsh.bfr.db/src/org/hsh/bfr/db/MyDBTablesNew.java and 4 other locations - About 55 mins to fix
org.hsh.bfr.db/src/org/hsh/bfr/db/MyDBTablesNew.java on lines 243..247
org.hsh.bfr.db/src/org/hsh/bfr/db/MyDBTablesNew.java on lines 248..252
org.hsh.bfr.db/src/org/hsh/bfr/db/MyDBTablesNew.java on lines 253..257
org.hsh.bfr.db/src/org/hsh/bfr/db/MyDBTablesNew.java on lines 1219..1220

Duplicated Code

Duplicated code can lead to software that is hard to understand and difficult to change. The Don't Repeat Yourself (DRY) principle states:

Every piece of knowledge must have a single, unambiguous, authoritative representation within a system.

When you violate DRY, bugs and maintenance problems are sure to follow. Duplicated code has a tendency to both continue to replicate and also to diverge (leaving bugs as two similar implementations differ in subtle ways).

Tuning

This issue has a mass of 66.

We set useful threshold defaults for the languages we support but you may want to adjust these settings based on your project guidelines.

The threshold configuration represents the minimum mass a code block must have to be analyzed for duplication. The lower the threshold, the more fine-grained the comparison.

If the engine is too easily reporting duplication, try raising the threshold. If you suspect that the engine isn't catching enough duplication, try lowering the threshold. The best setting tends to differ from language to language.

See codeclimate-duplication's documentation for more information about tuning the mass threshold in your .codeclimate.yml.

Refactorings

Further Reading

Identical blocks of code found in 2 locations. Consider refactoring.
Open

    if (StringUtils.isNotBlank(nodeSettings.simulation)) {
      FskPortObject fskObjk = fskObj;
      IntStream.range(0, simulation.size())
          .filter(index -> simulation.get(index).getName().equals(nodeSettings.simulation))
          .findFirst().ifPresent(index -> reSelectSimulation(fskObjk, index));
Severity: Minor
Found in de.bund.bfr.knime.fsklab.deprecatednodes/src-1_9_0/de/bund/bfr/knime/fsklab/v1_9/runner/RunnerNodeModel.java and 1 other location - About 55 mins to fix
de.bund.bfr.knime.fsklab.deprecatednodes/src-1_7_2/de/bund/bfr/knime/fsklab/nodes/v1_7_2/runner/RunnerNodeModel.java on lines 137..142

Duplicated Code

Duplicated code can lead to software that is hard to understand and difficult to change. The Don't Repeat Yourself (DRY) principle states:

Every piece of knowledge must have a single, unambiguous, authoritative representation within a system.

When you violate DRY, bugs and maintenance problems are sure to follow. Duplicated code has a tendency to both continue to replicate and also to diverge (leaving bugs as two similar implementations differ in subtle ways).

Tuning

This issue has a mass of 66.

We set useful threshold defaults for the languages we support but you may want to adjust these settings based on your project guidelines.

The threshold configuration represents the minimum mass a code block must have to be analyzed for duplication. The lower the threshold, the more fine-grained the comparison.

If the engine is too easily reporting duplication, try raising the threshold. If you suspect that the engine isn't catching enough duplication, try lowering the threshold. The best setting tends to differ from language to language.

See codeclimate-duplication's documentation for more information about tuning the mass threshold in your .codeclimate.yml.

Refactorings

Further Reading

Similar blocks of code found in 4 locations. Consider refactoring.
Open

        for (int numrow = BG_DIET_ASSESS_ROW; numrow < BG_DIET_ASSESS_ROW + 3; numrow++) {
            Row row = sheet.getRow(numrow);
            try {
                final DietaryAssessmentMethod method = ImporterUtils.retrieveDietaryAssessmentMethod(row,
                        methodColumns);
Severity: Major
Found in de.bund.bfr.knime.fsklab.metadata.model/src/metadata/swagger/RiskModelSheetImporter.java and 3 other locations - About 55 mins to fix
de.bund.bfr.knime.fsklab.metadata.model/src/metadata/swagger/RiskModelSheetImporter.java on lines 273..280
de.bund.bfr.knime.fsklab.metadata.model/src/metadata/swagger/RiskModelSheetImporter.java on lines 292..299
de.bund.bfr.knime.fsklab.metadata.model/src/metadata/swagger/RiskModelSheetImporter.java on lines 301..309

Duplicated Code

Duplicated code can lead to software that is hard to understand and difficult to change. The Don't Repeat Yourself (DRY) principle states:

Every piece of knowledge must have a single, unambiguous, authoritative representation within a system.

When you violate DRY, bugs and maintenance problems are sure to follow. Duplicated code has a tendency to both continue to replicate and also to diverge (leaving bugs as two similar implementations differ in subtle ways).

Tuning

This issue has a mass of 66.

We set useful threshold defaults for the languages we support but you may want to adjust these settings based on your project guidelines.

The threshold configuration represents the minimum mass a code block must have to be analyzed for duplication. The lower the threshold, the more fine-grained the comparison.

If the engine is too easily reporting duplication, try raising the threshold. If you suspect that the engine isn't catching enough duplication, try lowering the threshold. The best setting tends to differ from language to language.

See codeclimate-duplication's documentation for more information about tuning the mass threshold in your .codeclimate.yml.

Refactorings

Further Reading

Identical blocks of code found in 2 locations. Consider refactoring.
Open

                    for (int j = 0; j < indepXml.getElementSet().size(); j++) {
                        IndepXml element = (IndepXml) indepXml.get(j);

                        element.min = minValues.get(j);
                        element.max = maxValues.get(j);
Severity: Minor
Found in de.bund.bfr.knime.pmm.nodes/src/de/bund/bfr/knime/pmm/modelestimation/SecondaryEstimationThread.java and 1 other location - About 55 mins to fix
de.bund.bfr.knime.pmm.nodes/src/de/bund/bfr/knime/pmm/modelestimation/OneStepEstimationThread.java on lines 353..358

Duplicated Code

Duplicated code can lead to software that is hard to understand and difficult to change. The Don't Repeat Yourself (DRY) principle states:

Every piece of knowledge must have a single, unambiguous, authoritative representation within a system.

When you violate DRY, bugs and maintenance problems are sure to follow. Duplicated code has a tendency to both continue to replicate and also to diverge (leaving bugs as two similar implementations differ in subtle ways).

Tuning

This issue has a mass of 66.

We set useful threshold defaults for the languages we support but you may want to adjust these settings based on your project guidelines.

The threshold configuration represents the minimum mass a code block must have to be analyzed for duplication. The lower the threshold, the more fine-grained the comparison.

If the engine is too easily reporting duplication, try raising the threshold. If you suspect that the engine isn't catching enough duplication, try lowering the threshold. The best setting tends to differ from language to language.

See codeclimate-duplication's documentation for more information about tuning the mass threshold in your .codeclimate.yml.

Refactorings

Further Reading

Identical blocks of code found in 2 locations. Consider refactoring.
Open

  public static void createDefaultSimulation(FskPortObject fskObj) {

    if (SwaggerUtil.getModelMath(fskObj.modelMetadata) != null) {

      List<Parameter> combinedModelParameters = SwaggerUtil.getParameter(fskObj.modelMetadata);
Severity: Minor
Found in de.bund.bfr.knime.fsklab.nodes/src/de/bund/bfr/knime/fsklab/v2_0/joiner/JoinerNodeUtil.java and 1 other location - About 55 mins to fix
de.bund.bfr.knime.fsklab.deprecatednodes/src-1_9_0/de/bund/bfr/knime/fsklab/v1_9/joiner/JoinerNodeUtil.java on lines 239..250

Duplicated Code

Duplicated code can lead to software that is hard to understand and difficult to change. The Don't Repeat Yourself (DRY) principle states:

Every piece of knowledge must have a single, unambiguous, authoritative representation within a system.

When you violate DRY, bugs and maintenance problems are sure to follow. Duplicated code has a tendency to both continue to replicate and also to diverge (leaving bugs as two similar implementations differ in subtle ways).

Tuning

This issue has a mass of 66.

We set useful threshold defaults for the languages we support but you may want to adjust these settings based on your project guidelines.

The threshold configuration represents the minimum mass a code block must have to be analyzed for duplication. The lower the threshold, the more fine-grained the comparison.

If the engine is too easily reporting duplication, try raising the threshold. If you suspect that the engine isn't catching enough duplication, try lowering the threshold. The best setting tends to differ from language to language.

See codeclimate-duplication's documentation for more information about tuning the mass threshold in your .codeclimate.yml.

Refactorings

Further Reading

Identical blocks of code found in 2 locations. Consider refactoring.
Open

        if (minY == null) {
            parser.setVarValue(
                    paramX,
                    convertFromUnit(paramX, inverseTransform(minX, transformX),
                            unitX));
Severity: Minor
Found in de.bund.bfr.knime.pmm.common/src/de/bund/bfr/knime/pmm/common/chart/Plotable.java and 1 other location - About 55 mins to fix
de.bund.bfr.knime.pmm.common/src/de/bund/bfr/knime/pmm/common/chart/Plotable.java on lines 1097..1110

Duplicated Code

Duplicated code can lead to software that is hard to understand and difficult to change. The Don't Repeat Yourself (DRY) principle states:

Every piece of knowledge must have a single, unambiguous, authoritative representation within a system.

When you violate DRY, bugs and maintenance problems are sure to follow. Duplicated code has a tendency to both continue to replicate and also to diverge (leaving bugs as two similar implementations differ in subtle ways).

Tuning

This issue has a mass of 66.

We set useful threshold defaults for the languages we support but you may want to adjust these settings based on your project guidelines.

The threshold configuration represents the minimum mass a code block must have to be analyzed for duplication. The lower the threshold, the more fine-grained the comparison.

If the engine is too easily reporting duplication, try raising the threshold. If you suspect that the engine isn't catching enough duplication, try lowering the threshold. The best setting tends to differ from language to language.

See codeclimate-duplication's documentation for more information about tuning the mass threshold in your .codeclimate.yml.

Refactorings

Further Reading

Identical blocks of code found in 2 locations. Consider refactoring.
Open

                    for (int j = 0; j < indepXml.getElementSet().size(); j++) {
                        IndepXml element = (IndepXml) indepXml.get(j);

                        element.min = minValues.get(j);
                        element.max = maxValues.get(j);
Severity: Minor
Found in de.bund.bfr.knime.pmm.nodes/src/de/bund/bfr/knime/pmm/modelestimation/OneStepEstimationThread.java and 1 other location - About 55 mins to fix
de.bund.bfr.knime.pmm.nodes/src/de/bund/bfr/knime/pmm/modelestimation/SecondaryEstimationThread.java on lines 327..332

Duplicated Code

Duplicated code can lead to software that is hard to understand and difficult to change. The Don't Repeat Yourself (DRY) principle states:

Every piece of knowledge must have a single, unambiguous, authoritative representation within a system.

When you violate DRY, bugs and maintenance problems are sure to follow. Duplicated code has a tendency to both continue to replicate and also to diverge (leaving bugs as two similar implementations differ in subtle ways).

Tuning

This issue has a mass of 66.

We set useful threshold defaults for the languages we support but you may want to adjust these settings based on your project guidelines.

The threshold configuration represents the minimum mass a code block must have to be analyzed for duplication. The lower the threshold, the more fine-grained the comparison.

If the engine is too easily reporting duplication, try raising the threshold. If you suspect that the engine isn't catching enough duplication, try lowering the threshold. The best setting tends to differ from language to language.

See codeclimate-duplication's documentation for more information about tuning the mass threshold in your .codeclimate.yml.

Refactorings

Further Reading

Identical blocks of code found in 2 locations. Consider refactoring.
Open

    if (flowVariables.containsKey("modelMetaData.json")) {
      m_config.modelMetaData = flowVariables.get("modelMetaData.json").getStringValue();
    } else {
      File configFile = new File(settingFolder, "modelMetaData.json");
      if (configFile.exists()) {
Severity: Minor
Found in de.bund.bfr.knime.fsklab.nodes/src/de/bund/bfr/knime/fsklab/v2_0/joiner/JoinerNodeModel.java and 1 other location - About 55 mins to fix
de.bund.bfr.knime.fsklab.deprecatednodes/src-1_9_0/de/bund/bfr/knime/fsklab/v1_9/joiner/JoinerNodeModel.java on lines 377..384

Duplicated Code

Duplicated code can lead to software that is hard to understand and difficult to change. The Don't Repeat Yourself (DRY) principle states:

Every piece of knowledge must have a single, unambiguous, authoritative representation within a system.

When you violate DRY, bugs and maintenance problems are sure to follow. Duplicated code has a tendency to both continue to replicate and also to diverge (leaving bugs as two similar implementations differ in subtle ways).

Tuning

This issue has a mass of 66.

We set useful threshold defaults for the languages we support but you may want to adjust these settings based on your project guidelines.

The threshold configuration represents the minimum mass a code block must have to be analyzed for duplication. The lower the threshold, the more fine-grained the comparison.

If the engine is too easily reporting duplication, try raising the threshold. If you suspect that the engine isn't catching enough duplication, try lowering the threshold. The best setting tends to differ from language to language.

See codeclimate-duplication's documentation for more information about tuning the mass threshold in your .codeclimate.yml.

Refactorings

Further Reading

Identical blocks of code found in 2 locations. Consider refactoring.
Open

  public static void createDefaultSimulation(FskPortObject fskObj) {

    if (SwaggerUtil.getModelMath(fskObj.modelMetadata) != null) {

      List<Parameter> combinedModelParameters = SwaggerUtil.getParameter(fskObj.modelMetadata);
Severity: Minor
Found in de.bund.bfr.knime.fsklab.deprecatednodes/src-1_9_0/de/bund/bfr/knime/fsklab/v1_9/joiner/JoinerNodeUtil.java and 1 other location - About 55 mins to fix
de.bund.bfr.knime.fsklab.nodes/src/de/bund/bfr/knime/fsklab/v2_0/joiner/JoinerNodeUtil.java on lines 568..579

Duplicated Code

Duplicated code can lead to software that is hard to understand and difficult to change. The Don't Repeat Yourself (DRY) principle states:

Every piece of knowledge must have a single, unambiguous, authoritative representation within a system.

When you violate DRY, bugs and maintenance problems are sure to follow. Duplicated code has a tendency to both continue to replicate and also to diverge (leaving bugs as two similar implementations differ in subtle ways).

Tuning

This issue has a mass of 66.

We set useful threshold defaults for the languages we support but you may want to adjust these settings based on your project guidelines.

The threshold configuration represents the minimum mass a code block must have to be analyzed for duplication. The lower the threshold, the more fine-grained the comparison.

If the engine is too easily reporting duplication, try raising the threshold. If you suspect that the engine isn't catching enough duplication, try lowering the threshold. The best setting tends to differ from language to language.

See codeclimate-duplication's documentation for more information about tuning the mass threshold in your .codeclimate.yml.

Refactorings

Further Reading

Severity
Category
Status
Source
Language