Sign upLogin

SiLeBAT/FSK-Lab

View on GitHub
Star

Showing 14,752 of 14,752 total issues

Similar blocks of code found in 2 locations. Consider refactoring.
Open

  public static String parameterDeclarationError(String parameterDeclaration) {
    if (isNotNull("Simulation Parameter", parameterDeclaration)) {
      String msg =     "ERROR: Simulation Parameter could not be loaded. Remove dependencies by checking the parameter order in the simulation.\n";
      msg += ">> " + parameterDeclaration;
      LOGGER.error(msg);
Severity: Minor
Found in de.bund.bfr.knime.fsklab.nodes/src/de/bund/bfr/knime/fsklab/FskErrorMessages.java and 1 other location - About 40 mins to fix
de.bund.bfr.knime.fsklab.nodes/src/de/bund/bfr/knime/fsklab/FskErrorMessages.java on lines 129..137

Duplicated Code

Duplicated code can lead to software that is hard to understand and difficult to change. The Don't Repeat Yourself (DRY) principle states:

Every piece of knowledge must have a single, unambiguous, authoritative representation within a system.

When you violate DRY, bugs and maintenance problems are sure to follow. Duplicated code has a tendency to both continue to replicate and also to diverge (leaving bugs as two similar implementations differ in subtle ways).

Tuning

This issue has a mass of 52.

We set useful threshold defaults for the languages we support but you may want to adjust these settings based on your project guidelines.

The threshold configuration represents the minimum mass a code block must have to be analyzed for duplication. The lower the threshold, the more fine-grained the comparison.

If the engine is too easily reporting duplication, try raising the threshold. If you suspect that the engine isn't catching enough duplication, try lowering the threshold. The best setting tends to differ from language to language.

See codeclimate-duplication's documentation for more information about tuning the mass threshold in your .codeclimate.yml.

Refactorings

Further Reading

Similar blocks of code found in 2 locations. Consider refactoring.
Open

 public static String parameterJsonConversionError(String parameter) {
   if (isNotNull("Simulation Parameter", parameter)) {
     String msg = "ERROR: Simulation Parameter cant be serialized to JSON. Make sure the data type is supported by FSK-Lab.\n";
     msg += ">> " + parameter;
     LOGGER.error(msg);
Severity: Minor
Found in de.bund.bfr.knime.fsklab.nodes/src/de/bund/bfr/knime/fsklab/FskErrorMessages.java and 1 other location - About 40 mins to fix
de.bund.bfr.knime.fsklab.nodes/src/de/bund/bfr/knime/fsklab/FskErrorMessages.java on lines 112..120

Duplicated Code

Duplicated code can lead to software that is hard to understand and difficult to change. The Don't Repeat Yourself (DRY) principle states:

Every piece of knowledge must have a single, unambiguous, authoritative representation within a system.

When you violate DRY, bugs and maintenance problems are sure to follow. Duplicated code has a tendency to both continue to replicate and also to diverge (leaving bugs as two similar implementations differ in subtle ways).

Tuning

This issue has a mass of 52.

We set useful threshold defaults for the languages we support but you may want to adjust these settings based on your project guidelines.

The threshold configuration represents the minimum mass a code block must have to be analyzed for duplication. The lower the threshold, the more fine-grained the comparison.

If the engine is too easily reporting duplication, try raising the threshold. If you suspect that the engine isn't catching enough duplication, try lowering the threshold. The best setting tends to differ from language to language.

See codeclimate-duplication's documentation for more information about tuning the mass threshold in your .codeclimate.yml.

Refactorings

Further Reading

Similar blocks of code found in 2 locations. Consider refactoring.
Open

            for (int i=0;i<this.getTable().getKeyListeners().length;i++) {
                if (this.getTable().getKeyListeners()[i] instanceof MyDBTable) {
                    hasKeyListener = true;
                    break;
                }
Severity: Minor
Found in org.hsh.bfr.db/src/org/hsh/bfr/db/gui/dbtable/MyDBTable.java and 1 other location - About 40 mins to fix
org.hsh.bfr.db/src/org/hsh/bfr/db/gui/dbtable/MyDBTable.java on lines 176..181

Duplicated Code

Duplicated code can lead to software that is hard to understand and difficult to change. The Don't Repeat Yourself (DRY) principle states:

Every piece of knowledge must have a single, unambiguous, authoritative representation within a system.

When you violate DRY, bugs and maintenance problems are sure to follow. Duplicated code has a tendency to both continue to replicate and also to diverge (leaving bugs as two similar implementations differ in subtle ways).

Tuning

This issue has a mass of 52.

We set useful threshold defaults for the languages we support but you may want to adjust these settings based on your project guidelines.

The threshold configuration represents the minimum mass a code block must have to be analyzed for duplication. The lower the threshold, the more fine-grained the comparison.

If the engine is too easily reporting duplication, try raising the threshold. If you suspect that the engine isn't catching enough duplication, try lowering the threshold. The best setting tends to differ from language to language.

See codeclimate-duplication's documentation for more information about tuning the mass threshold in your .codeclimate.yml.

Refactorings

Further Reading

Similar blocks of code found in 2 locations. Consider refactoring.
Open

        MyTable tenazity_raw_data = new MyTable("Versuchsbedingungen", new String[]{"Referenz","Agens","AgensDetail","Matrix","EAN","MatrixDetail",
                "Messwerte",
                "Temperatur","pH","aw","CO2","Druck","Luftfeuchtigkeit",
                "in_on","Sonstiges","ExperimentalDetails","Nachweisverfahren","FreigabeModus",
                "ID_CB","Organismus_CB","environment_CB","b_f_CB","b_f_details_CB"},
Severity: Minor
Found in org.hsh.bfr.db/src/org/hsh/bfr/db/MyDBTablesNew.java and 1 other location - About 40 mins to fix
org.hsh.bfr.db/src/org/hsh/bfr/db/MyDBTablesNew.java on lines 902..906

Duplicated Code

Duplicated code can lead to software that is hard to understand and difficult to change. The Don't Repeat Yourself (DRY) principle states:

Every piece of knowledge must have a single, unambiguous, authoritative representation within a system.

When you violate DRY, bugs and maintenance problems are sure to follow. Duplicated code has a tendency to both continue to replicate and also to diverge (leaving bugs as two similar implementations differ in subtle ways).

Tuning

This issue has a mass of 52.

We set useful threshold defaults for the languages we support but you may want to adjust these settings based on your project guidelines.

The threshold configuration represents the minimum mass a code block must have to be analyzed for duplication. The lower the threshold, the more fine-grained the comparison.

If the engine is too easily reporting duplication, try raising the threshold. If you suspect that the engine isn't catching enough duplication, try lowering the threshold. The best setting tends to differ from language to language.

See codeclimate-duplication's documentation for more information about tuning the mass threshold in your .codeclimate.yml.

Refactorings

Further Reading

Similar blocks of code found in 2 locations. Consider refactoring.
Open

            if (set.getAgentDetails().containsKey(id)) {
                agentDetailList.add(set.getAgentDetails().get(id));
            } else {
                agentDetailList.add(((AgentXml) tuple.getPmmXml(TimeSeriesSchema.ATT_AGENT).get(0)).detail);
            }
Severity: Minor
Found in de.bund.bfr.knime.pmm.nodes/src/de/bund/bfr/knime/pmm/microbialdataedit/MicrobialDataEditNodeDialog.java and 1 other location - About 40 mins to fix
de.bund.bfr.knime.pmm.nodes/src/de/bund/bfr/knime/pmm/microbialdataedit/MicrobialDataEditNodeDialog.java on lines 271..275

Duplicated Code

Duplicated code can lead to software that is hard to understand and difficult to change. The Don't Repeat Yourself (DRY) principle states:

Every piece of knowledge must have a single, unambiguous, authoritative representation within a system.

When you violate DRY, bugs and maintenance problems are sure to follow. Duplicated code has a tendency to both continue to replicate and also to diverge (leaving bugs as two similar implementations differ in subtle ways).

Tuning

This issue has a mass of 52.

We set useful threshold defaults for the languages we support but you may want to adjust these settings based on your project guidelines.

The threshold configuration represents the minimum mass a code block must have to be analyzed for duplication. The lower the threshold, the more fine-grained the comparison.

If the engine is too easily reporting duplication, try raising the threshold. If you suspect that the engine isn't catching enough duplication, try lowering the threshold. The best setting tends to differ from language to language.

See codeclimate-duplication's documentation for more information about tuning the mass threshold in your .codeclimate.yml.

Refactorings

Further Reading

Similar blocks of code found in 2 locations. Consider refactoring.
Open

            for (int i=0;i<this.getTable().getMouseListeners().length;i++) {
                if (this.getTable().getMouseListeners()[i] instanceof MyDBTable) {
                    hasMouseListener = true;
                    break;
                }
Severity: Minor
Found in org.hsh.bfr.db/src/org/hsh/bfr/db/gui/dbtable/MyDBTable.java and 1 other location - About 40 mins to fix
org.hsh.bfr.db/src/org/hsh/bfr/db/gui/dbtable/MyDBTable.java on lines 187..192

Duplicated Code

Duplicated code can lead to software that is hard to understand and difficult to change. The Don't Repeat Yourself (DRY) principle states:

Every piece of knowledge must have a single, unambiguous, authoritative representation within a system.

When you violate DRY, bugs and maintenance problems are sure to follow. Duplicated code has a tendency to both continue to replicate and also to diverge (leaving bugs as two similar implementations differ in subtle ways).

Tuning

This issue has a mass of 52.

We set useful threshold defaults for the languages we support but you may want to adjust these settings based on your project guidelines.

The threshold configuration represents the minimum mass a code block must have to be analyzed for duplication. The lower the threshold, the more fine-grained the comparison.

If the engine is too easily reporting duplication, try raising the threshold. If you suspect that the engine isn't catching enough duplication, try lowering the threshold. The best setting tends to differ from language to language.

See codeclimate-duplication's documentation for more information about tuning the mass threshold in your .codeclimate.yml.

Refactorings

Further Reading

Similar blocks of code found in 2 locations. Consider refactoring.
Open

                        if (min != null) {
                            if (original.min != null) {
                                original.min = Math.min(original.min, min);
                            } else {
                                original.min = min;
Severity: Minor
Found in de.bund.bfr.knime.pmm.common/src/de/bund/bfr/knime/pmm/common/ModelCombiner.java and 1 other location - About 40 mins to fix
de.bund.bfr.knime.pmm.common/src/de/bund/bfr/knime/pmm/common/ModelCombiner.java on lines 149..155

Duplicated Code

Duplicated code can lead to software that is hard to understand and difficult to change. The Don't Repeat Yourself (DRY) principle states:

Every piece of knowledge must have a single, unambiguous, authoritative representation within a system.

When you violate DRY, bugs and maintenance problems are sure to follow. Duplicated code has a tendency to both continue to replicate and also to diverge (leaving bugs as two similar implementations differ in subtle ways).

Tuning

This issue has a mass of 52.

We set useful threshold defaults for the languages we support but you may want to adjust these settings based on your project guidelines.

The threshold configuration represents the minimum mass a code block must have to be analyzed for duplication. The lower the threshold, the more fine-grained the comparison.

If the engine is too easily reporting duplication, try raising the threshold. If you suspect that the engine isn't catching enough duplication, try lowering the threshold. The best setting tends to differ from language to language.

See codeclimate-duplication's documentation for more information about tuning the mass threshold in your .codeclimate.yml.

Refactorings

Further Reading

Similar blocks of code found in 2 locations. Consider refactoring.
Open

    @Override
    protected PortObjectSpec[] configure(PortObjectSpec[] inSpecs)
            throws InvalidSettingsException {
        if (!SchemaFactory.createDataSchema().conforms(
                (DataTableSpec) inSpecs[0])) {
Severity: Minor
Found in de.bund.bfr.knime.pmm.nodes/src/de/bund/bfr/knime/pmm/dataviewandselect/DataViewAndSelectNodeModel.java and 1 other location - About 40 mins to fix
de.bund.bfr.knime.pmm.nodes/src/de/bund/bfr/knime/pmm/predictorview/PredictorViewNodeModel.java on lines 183..194

Duplicated Code

Duplicated code can lead to software that is hard to understand and difficult to change. The Don't Repeat Yourself (DRY) principle states:

Every piece of knowledge must have a single, unambiguous, authoritative representation within a system.

When you violate DRY, bugs and maintenance problems are sure to follow. Duplicated code has a tendency to both continue to replicate and also to diverge (leaving bugs as two similar implementations differ in subtle ways).

Tuning

This issue has a mass of 52.

We set useful threshold defaults for the languages we support but you may want to adjust these settings based on your project guidelines.

The threshold configuration represents the minimum mass a code block must have to be analyzed for duplication. The lower the threshold, the more fine-grained the comparison.

If the engine is too easily reporting duplication, try raising the threshold. If you suspect that the engine isn't catching enough duplication, try lowering the threshold. The best setting tends to differ from language to language.

See codeclimate-duplication's documentation for more information about tuning the mass threshold in your .codeclimate.yml.

Refactorings

Further Reading

Similar blocks of code found in 2 locations. Consider refactoring.
Open

        if (agentString != null && !agentString.trim().isEmpty()) {
            result += " AND (INSTR(LCASE(\"Agensname\"), '" + agentString.toLowerCase() + "') > 0" + " OR INSTR(LCASE(\"AgensDetail\"), '" + agentString.toLowerCase() + "') > 0)";
        }
Severity: Minor
Found in de.bund.bfr.knime.pmm.nodes/src/de/bund/bfr/knime/pmm/timeseriesreader/TimeSeriesReaderNodeModel.java and 1 other location - About 40 mins to fix
de.bund.bfr.knime.pmm.nodes/src/de/bund/bfr/knime/pmm/timeseriesreader/TimeSeriesReaderNodeModel.java on lines 114..117

Duplicated Code

Duplicated code can lead to software that is hard to understand and difficult to change. The Don't Repeat Yourself (DRY) principle states:

Every piece of knowledge must have a single, unambiguous, authoritative representation within a system.

When you violate DRY, bugs and maintenance problems are sure to follow. Duplicated code has a tendency to both continue to replicate and also to diverge (leaving bugs as two similar implementations differ in subtle ways).

Tuning

This issue has a mass of 52.

We set useful threshold defaults for the languages we support but you may want to adjust these settings based on your project guidelines.

The threshold configuration represents the minimum mass a code block must have to be analyzed for duplication. The lower the threshold, the more fine-grained the comparison.

If the engine is too easily reporting duplication, try raising the threshold. If you suspect that the engine isn't catching enough duplication, try lowering the threshold. The best setting tends to differ from language to language.

See codeclimate-duplication's documentation for more information about tuning the mass threshold in your .codeclimate.yml.

Refactorings

Further Reading

Similar blocks of code found in 2 locations. Consider refactoring.
Open

    static {
        matrix = new Matrix();
        matrix.id = 21003;
        matrix.name = "culture media";
        matrix.detail = "broth";
Severity: Minor
Found in de.bund.bfr.knime.pmm.nodes.tests/src/de/bund/bfr/knime/pmm/js/common/MatrixTest.java and 1 other location - About 40 mins to fix
de.bund.bfr.knime.pmm.nodes.tests/src/de/bund/bfr/knime/pmm/js/common/AgentTest.java on lines 18..24

Duplicated Code

Duplicated code can lead to software that is hard to understand and difficult to change. The Don't Repeat Yourself (DRY) principle states:

Every piece of knowledge must have a single, unambiguous, authoritative representation within a system.

When you violate DRY, bugs and maintenance problems are sure to follow. Duplicated code has a tendency to both continue to replicate and also to diverge (leaving bugs as two similar implementations differ in subtle ways).

Tuning

This issue has a mass of 52.

We set useful threshold defaults for the languages we support but you may want to adjust these settings based on your project guidelines.

The threshold configuration represents the minimum mass a code block must have to be analyzed for duplication. The lower the threshold, the more fine-grained the comparison.

If the engine is too easily reporting duplication, try raising the threshold. If you suspect that the engine isn't catching enough duplication, try lowering the threshold. The best setting tends to differ from language to language.

See codeclimate-duplication's documentation for more information about tuning the mass threshold in your .codeclimate.yml.

Refactorings

Further Reading

Similar blocks of code found in 2 locations. Consider refactoring.
Open

    @Override
    protected PortObjectSpec[] configure(PortObjectSpec[] inSpecs)
            throws InvalidSettingsException {
        if (!SchemaFactory.createM1Schema()
                .conforms((DataTableSpec) inSpecs[0])) {
Severity: Minor
Found in de.bund.bfr.knime.pmm.nodes/src/de/bund/bfr/knime/pmm/predictorview/PredictorViewNodeModel.java and 1 other location - About 40 mins to fix
de.bund.bfr.knime.pmm.nodes/src/de/bund/bfr/knime/pmm/dataviewandselect/DataViewAndSelectNodeModel.java on lines 136..147

Duplicated Code

Duplicated code can lead to software that is hard to understand and difficult to change. The Don't Repeat Yourself (DRY) principle states:

Every piece of knowledge must have a single, unambiguous, authoritative representation within a system.

When you violate DRY, bugs and maintenance problems are sure to follow. Duplicated code has a tendency to both continue to replicate and also to diverge (leaving bugs as two similar implementations differ in subtle ways).

Tuning

This issue has a mass of 52.

We set useful threshold defaults for the languages we support but you may want to adjust these settings based on your project guidelines.

The threshold configuration represents the minimum mass a code block must have to be analyzed for duplication. The lower the threshold, the more fine-grained the comparison.

If the engine is too easily reporting duplication, try raising the threshold. If you suspect that the engine isn't catching enough duplication, try lowering the threshold. The best setting tends to differ from language to language.

See codeclimate-duplication's documentation for more information about tuning the mass threshold in your .codeclimate.yml.

Refactorings

Further Reading

Similar blocks of code found in 2 locations. Consider refactoring.
Open

    static {
        agent = new Agent();
        agent.id = 4024;
        agent.name = "salmonella spp";
        agent.detail = "Salmonella spec";
Severity: Minor
Found in de.bund.bfr.knime.pmm.nodes.tests/src/de/bund/bfr/knime/pmm/js/common/AgentTest.java and 1 other location - About 40 mins to fix
de.bund.bfr.knime.pmm.nodes.tests/src/de/bund/bfr/knime/pmm/js/common/MatrixTest.java on lines 17..23

Duplicated Code

Duplicated code can lead to software that is hard to understand and difficult to change. The Don't Repeat Yourself (DRY) principle states:

Every piece of knowledge must have a single, unambiguous, authoritative representation within a system.

When you violate DRY, bugs and maintenance problems are sure to follow. Duplicated code has a tendency to both continue to replicate and also to diverge (leaving bugs as two similar implementations differ in subtle ways).

Tuning

This issue has a mass of 52.

We set useful threshold defaults for the languages we support but you may want to adjust these settings based on your project guidelines.

The threshold configuration represents the minimum mass a code block must have to be analyzed for duplication. The lower the threshold, the more fine-grained the comparison.

If the engine is too easily reporting duplication, try raising the threshold. If you suspect that the engine isn't catching enough duplication, try lowering the threshold. The best setting tends to differ from language to language.

See codeclimate-duplication's documentation for more information about tuning the mass threshold in your .codeclimate.yml.

Refactorings

Further Reading

Similar blocks of code found in 2 locations. Consider refactoring.
Open

            if (set.getMatrixDetails().containsKey(id)) {
                matrixDetailList.add(set.getMatrixDetails().get(id));
            } else {
                matrixDetailList.add(((MatrixXml) tuple.getPmmXml(TimeSeriesSchema.ATT_MATRIX).get(0)).detail);
            }
Severity: Minor
Found in de.bund.bfr.knime.pmm.nodes/src/de/bund/bfr/knime/pmm/microbialdataedit/MicrobialDataEditNodeDialog.java and 1 other location - About 40 mins to fix
de.bund.bfr.knime.pmm.nodes/src/de/bund/bfr/knime/pmm/microbialdataedit/MicrobialDataEditNodeDialog.java on lines 259..263

Duplicated Code

Duplicated code can lead to software that is hard to understand and difficult to change. The Don't Repeat Yourself (DRY) principle states:

Every piece of knowledge must have a single, unambiguous, authoritative representation within a system.

When you violate DRY, bugs and maintenance problems are sure to follow. Duplicated code has a tendency to both continue to replicate and also to diverge (leaving bugs as two similar implementations differ in subtle ways).

Tuning

This issue has a mass of 52.

We set useful threshold defaults for the languages we support but you may want to adjust these settings based on your project guidelines.

The threshold configuration represents the minimum mass a code block must have to be analyzed for duplication. The lower the threshold, the more fine-grained the comparison.

If the engine is too easily reporting duplication, try raising the threshold. If you suspect that the engine isn't catching enough duplication, try lowering the threshold. The best setting tends to differ from language to language.

See codeclimate-duplication's documentation for more information about tuning the mass threshold in your .codeclimate.yml.

Refactorings

Further Reading

Similar blocks of code found in 2 locations. Consider refactoring.
Open

                new String[]{"INTEGER","INTEGER","VARCHAR(255)","INTEGER","VARCHAR(255)","VARCHAR(255)",
                "INTEGER",
                "DOUBLE","DOUBLE","DOUBLE","DOUBLE","DOUBLE","DOUBLE",
                "CHAR(2)","INTEGER","VARCHAR(16383)","INTEGER","INTEGER",
                "VARCHAR(50)","VARCHAR(255)","VARCHAR(255)","VARCHAR(255)","VARCHAR(255)"},
Severity: Minor
Found in org.hsh.bfr.db/src/org/hsh/bfr/db/MyDBTablesNew.java and 1 other location - About 40 mins to fix
org.hsh.bfr.db/src/org/hsh/bfr/db/MyDBTablesNew.java on lines 897..901

Duplicated Code

Duplicated code can lead to software that is hard to understand and difficult to change. The Don't Repeat Yourself (DRY) principle states:

Every piece of knowledge must have a single, unambiguous, authoritative representation within a system.

When you violate DRY, bugs and maintenance problems are sure to follow. Duplicated code has a tendency to both continue to replicate and also to diverge (leaving bugs as two similar implementations differ in subtle ways).

Tuning

This issue has a mass of 52.

We set useful threshold defaults for the languages we support but you may want to adjust these settings based on your project guidelines.

The threshold configuration represents the minimum mass a code block must have to be analyzed for duplication. The lower the threshold, the more fine-grained the comparison.

If the engine is too easily reporting duplication, try raising the threshold. If you suspect that the engine isn't catching enough duplication, try lowering the threshold. The best setting tends to differ from language to language.

See codeclimate-duplication's documentation for more information about tuning the mass threshold in your .codeclimate.yml.

Refactorings

Further Reading

Similar blocks of code found in 2 locations. Consider refactoring.
Open

        if (depVarMinCell.getCellType() == Cell.CELL_TYPE_STRING) {
            dep.setMinValue(depVarMinCell.getStringCellValue());
        } else if (depVarMinCell.getCellType() == Cell.CELL_TYPE_NUMERIC) {
            dep.setMinValue(Double.toString(depVarMinCell.getNumericCellValue()));
        }
Severity: Minor
Found in de.bund.bfr.knime.fsklab.metadata.model/src/metadata/PreRakipSheetImporter.java and 1 other location - About 40 mins to fix
de.bund.bfr.knime.fsklab.metadata.model/src/metadata/PreRakipSheetImporter.java on lines 110..114

Duplicated Code

Duplicated code can lead to software that is hard to understand and difficult to change. The Don't Repeat Yourself (DRY) principle states:

Every piece of knowledge must have a single, unambiguous, authoritative representation within a system.

When you violate DRY, bugs and maintenance problems are sure to follow. Duplicated code has a tendency to both continue to replicate and also to diverge (leaving bugs as two similar implementations differ in subtle ways).

Tuning

This issue has a mass of 52.

We set useful threshold defaults for the languages we support but you may want to adjust these settings based on your project guidelines.

The threshold configuration represents the minimum mass a code block must have to be analyzed for duplication. The lower the threshold, the more fine-grained the comparison.

If the engine is too easily reporting duplication, try raising the threshold. If you suspect that the engine isn't catching enough duplication, try lowering the threshold. The best setting tends to differ from language to language.

See codeclimate-duplication's documentation for more information about tuning the mass threshold in your .codeclimate.yml.

Refactorings

Further Reading

Similar blocks of code found in 2 locations. Consider refactoring.
Open

        if (depVarMaxCell.getCellType() == Cell.CELL_TYPE_STRING) {
            dep.setMaxValue(depVarMaxCell.getStringCellValue());
        } else if (depVarMaxCell.getCellType() == Cell.CELL_TYPE_NUMERIC) {
            dep.setMaxValue(Double.toString(depVarMaxCell.getNumericCellValue()));
        }
Severity: Minor
Found in de.bund.bfr.knime.fsklab.metadata.model/src/metadata/PreRakipSheetImporter.java and 1 other location - About 40 mins to fix
de.bund.bfr.knime.fsklab.metadata.model/src/metadata/PreRakipSheetImporter.java on lines 103..107

Duplicated Code

Duplicated code can lead to software that is hard to understand and difficult to change. The Don't Repeat Yourself (DRY) principle states:

Every piece of knowledge must have a single, unambiguous, authoritative representation within a system.

When you violate DRY, bugs and maintenance problems are sure to follow. Duplicated code has a tendency to both continue to replicate and also to diverge (leaving bugs as two similar implementations differ in subtle ways).

Tuning

This issue has a mass of 52.

We set useful threshold defaults for the languages we support but you may want to adjust these settings based on your project guidelines.

The threshold configuration represents the minimum mass a code block must have to be analyzed for duplication. The lower the threshold, the more fine-grained the comparison.

If the engine is too easily reporting duplication, try raising the threshold. If you suspect that the engine isn't catching enough duplication, try lowering the threshold. The best setting tends to differ from language to language.

See codeclimate-duplication's documentation for more information about tuning the mass threshold in your .codeclimate.yml.

Refactorings

Further Reading

Identical blocks of code found in 2 locations. Consider refactoring.
Open

         if (magnetT && magnetT.getAttribute('port-group') === 'out' &&
            magnetS && magnetS.getAttribute('port-group') === 'in' )
            return false;
Severity: Minor
Found in de.bund.bfr.knime.fsklab.deprecatednodes/js-src/de/bund/bfr/knime/fsklab/v1.9/joiner/joiner.js and 1 other location - About 40 mins to fix
de.bund.bfr.knime.fsklab.nodes/js-src/de/bund/bfr/knime/fsklab/v2.0/joiner/joiner.js on lines 944..946

Duplicated Code

Duplicated code can lead to software that is hard to understand and difficult to change. The Don't Repeat Yourself (DRY) principle states:

Every piece of knowledge must have a single, unambiguous, authoritative representation within a system.

When you violate DRY, bugs and maintenance problems are sure to follow. Duplicated code has a tendency to both continue to replicate and also to diverge (leaving bugs as two similar implementations differ in subtle ways).

Tuning

This issue has a mass of 49.

We set useful threshold defaults for the languages we support but you may want to adjust these settings based on your project guidelines.

The threshold configuration represents the minimum mass a code block must have to be analyzed for duplication. The lower the threshold, the more fine-grained the comparison.

If the engine is too easily reporting duplication, try raising the threshold. If you suspect that the engine isn't catching enough duplication, try lowering the threshold. The best setting tends to differ from language to language.

See codeclimate-duplication's documentation for more information about tuning the mass threshold in your .codeclimate.yml.

Refactorings

Further Reading

Identical blocks of code found in 2 locations. Consider refactoring.
Open

        if (magnetT && magnetT.getAttribute('port-group') === 'out' &&
          magnetS && magnetS.getAttribute('port-group') === 'in')
          return false;
Severity: Minor
Found in de.bund.bfr.knime.fsklab.nodes/js-src/de/bund/bfr/knime/fsklab/v2.0/joiner/joiner.js and 1 other location - About 40 mins to fix
de.bund.bfr.knime.fsklab.deprecatednodes/js-src/de/bund/bfr/knime/fsklab/v1.9/joiner/joiner.js on lines 333..335

Duplicated Code

Duplicated code can lead to software that is hard to understand and difficult to change. The Don't Repeat Yourself (DRY) principle states:

Every piece of knowledge must have a single, unambiguous, authoritative representation within a system.

When you violate DRY, bugs and maintenance problems are sure to follow. Duplicated code has a tendency to both continue to replicate and also to diverge (leaving bugs as two similar implementations differ in subtle ways).

Tuning

This issue has a mass of 49.

We set useful threshold defaults for the languages we support but you may want to adjust these settings based on your project guidelines.

The threshold configuration represents the minimum mass a code block must have to be analyzed for duplication. The lower the threshold, the more fine-grained the comparison.

If the engine is too easily reporting duplication, try raising the threshold. If you suspect that the engine isn't catching enough duplication, try lowering the threshold. The best setting tends to differ from language to language.

See codeclimate-duplication's documentation for more information about tuning the mass threshold in your .codeclimate.yml.

Refactorings

Further Reading

Similar blocks of code found in 3 locations. Consider refactoring.
Open

  function d3_layout_treemapPadNull(node) {
    return {
      x: node.x,
      y: node.y,
      dx: node.dx,
Severity: Major
Found in de.bund.bfr.knime.pmm.nodes/js-src/de/bund/bfr/knime/pmm/js/modelplotter/d3.js and 2 other locations - About 40 mins to fix
de.bund.bfr.knime.js/js-lib/codemirror-5.49.2/mode/mscgen/mscgen.js on lines 91..98
de.bund.bfr.knime.pmm.nodes/js-src/de/bund/bfr/knime/pmm/js/modelplotter/jquery-ui.js on lines 10586..10593

Duplicated Code

Duplicated code can lead to software that is hard to understand and difficult to change. The Don't Repeat Yourself (DRY) principle states:

Every piece of knowledge must have a single, unambiguous, authoritative representation within a system.

When you violate DRY, bugs and maintenance problems are sure to follow. Duplicated code has a tendency to both continue to replicate and also to diverge (leaving bugs as two similar implementations differ in subtle ways).

Tuning

This issue has a mass of 49.

We set useful threshold defaults for the languages we support but you may want to adjust these settings based on your project guidelines.

The threshold configuration represents the minimum mass a code block must have to be analyzed for duplication. The lower the threshold, the more fine-grained the comparison.

If the engine is too easily reporting duplication, try raising the threshold. If you suspect that the engine isn't catching enough duplication, try lowering the threshold. The best setting tends to differ from language to language.

See codeclimate-duplication's documentation for more information about tuning the mass threshold in your .codeclimate.yml.

Refactorings

Further Reading

Identical blocks of code found in 2 locations. Consider refactoring.
Open

  SelectAdapter.prototype.matches = function (params, data) {
    var matcher = this.options.get('matcher');

    return matcher(params, data);
  };
Severity: Minor
Found in de.bund.bfr.knime.js/src/js/lib/select2.full.js and 1 other location - About 40 mins to fix
de.bund.bfr.knime.pmm.nodes/js-lib/select2/4_0_3/debug/js/select2.js on lines 3313..3317

Duplicated Code

Duplicated code can lead to software that is hard to understand and difficult to change. The Don't Repeat Yourself (DRY) principle states:

Every piece of knowledge must have a single, unambiguous, authoritative representation within a system.

When you violate DRY, bugs and maintenance problems are sure to follow. Duplicated code has a tendency to both continue to replicate and also to diverge (leaving bugs as two similar implementations differ in subtle ways).

Tuning

This issue has a mass of 49.

We set useful threshold defaults for the languages we support but you may want to adjust these settings based on your project guidelines.

The threshold configuration represents the minimum mass a code block must have to be analyzed for duplication. The lower the threshold, the more fine-grained the comparison.

If the engine is too easily reporting duplication, try raising the threshold. If you suspect that the engine isn't catching enough duplication, try lowering the threshold. The best setting tends to differ from language to language.

See codeclimate-duplication's documentation for more information about tuning the mass threshold in your .codeclimate.yml.

Refactorings

Further Reading

Severity
Category
Status
Source
Language