Sign upLogin

SiLeBAT/FSK-Lab

View on GitHub
Star

Showing 14,752 of 14,752 total issues

Identical blocks of code found in 3 locations. Consider refactoring.
Open

      if (StringUtils.isNotEmpty(metadata.referenceDescriptionLink)) {
        XMLNode refdescLinkNode = new XMLNode(new XMLTriple(REFDESCLINK_TAG, "", REFDESCLINK_NS));
        refdescLinkNode.addChild(new XMLNode(metadata.referenceDescriptionLink));
        pmfNode.addChild(refdescLinkNode);
      }
Severity: Minor
Found in de.bund.bfr.knime.fsklab.deprecatednodes/src-1_0_2/de/bund/bfr/knime/fsklab/nodes/MetadataDocument.java and 2 other locations - About 40 mins to fix
de.bund.bfr.knime.fsklab.deprecatednodes/src-1_0_2/de/bund/bfr/knime/fsklab/nodes/MetadataDocument.java on lines 468..472
de.bund.bfr.knime.fsklab.deprecatednodes/src-1_0_2/de/bund/bfr/knime/fsklab/nodes/MetadataDocument.java on lines 475..479

Duplicated Code

Duplicated code can lead to software that is hard to understand and difficult to change. The Don't Repeat Yourself (DRY) principle states:

Every piece of knowledge must have a single, unambiguous, authoritative representation within a system.

When you violate DRY, bugs and maintenance problems are sure to follow. Duplicated code has a tendency to both continue to replicate and also to diverge (leaving bugs as two similar implementations differ in subtle ways).

Tuning

This issue has a mass of 48.

We set useful threshold defaults for the languages we support but you may want to adjust these settings based on your project guidelines.

The threshold configuration represents the minimum mass a code block must have to be analyzed for duplication. The lower the threshold, the more fine-grained the comparison.

If the engine is too easily reporting duplication, try raising the threshold. If you suspect that the engine isn't catching enough duplication, try lowering the threshold. The best setting tends to differ from language to language.

See codeclimate-duplication's documentation for more information about tuning the mass threshold in your .codeclimate.yml.

Refactorings

Further Reading

Identical blocks of code found in 3 locations. Consider refactoring.
Open

            if (containsData) {
                creator.setColorLists(set.getColorLists());
                creator.setShapeLists(set.getShapeLists());
            } else {
                creator.setColors(set.getColors());
Severity: Minor
Found in de.bund.bfr.knime.pmm.nodes/src/de/bund/bfr/knime/pmm/secondarymodelanddataview/SecondaryModelAndDataViewNodeModel.java and 2 other locations - About 40 mins to fix
de.bund.bfr.knime.pmm.nodes/src/de/bund/bfr/knime/pmm/secondarymodelanddataview/SecondaryModelAndDataViewNodeDialog.java on lines 202..208
de.bund.bfr.knime.pmm.nodes/src/de/bund/bfr/knime/pmm/secondarymodelanddataview/SecondaryModelAndDataViewNodeDialog.java on lines 289..295

Duplicated Code

Duplicated code can lead to software that is hard to understand and difficult to change. The Don't Repeat Yourself (DRY) principle states:

Every piece of knowledge must have a single, unambiguous, authoritative representation within a system.

When you violate DRY, bugs and maintenance problems are sure to follow. Duplicated code has a tendency to both continue to replicate and also to diverge (leaving bugs as two similar implementations differ in subtle ways).

Tuning

This issue has a mass of 48.

We set useful threshold defaults for the languages we support but you may want to adjust these settings based on your project guidelines.

The threshold configuration represents the minimum mass a code block must have to be analyzed for duplication. The lower the threshold, the more fine-grained the comparison.

If the engine is too easily reporting duplication, try raising the threshold. If you suspect that the engine isn't catching enough duplication, try lowering the threshold. The best setting tends to differ from language to language.

See codeclimate-duplication's documentation for more information about tuning the mass threshold in your .codeclimate.yml.

Refactorings

Further Reading

Identical blocks of code found in 3 locations. Consider refactoring.
Open

        if (containsData) {
            selectionPanel.setColorLists(set.getColorLists());
            selectionPanel.setShapeLists(set.getShapeLists());
        } else {
            selectionPanel.setColors(set.getColors());
Severity: Minor
Found in de.bund.bfr.knime.pmm.nodes/src/de/bund/bfr/knime/pmm/secondarymodelanddataview/SecondaryModelAndDataViewNodeDialog.java and 2 other locations - About 40 mins to fix
de.bund.bfr.knime.pmm.nodes/src/de/bund/bfr/knime/pmm/secondarymodelanddataview/SecondaryModelAndDataViewNodeDialog.java on lines 289..295
de.bund.bfr.knime.pmm.nodes/src/de/bund/bfr/knime/pmm/secondarymodelanddataview/SecondaryModelAndDataViewNodeModel.java on lines 148..154

Duplicated Code

Duplicated code can lead to software that is hard to understand and difficult to change. The Don't Repeat Yourself (DRY) principle states:

Every piece of knowledge must have a single, unambiguous, authoritative representation within a system.

When you violate DRY, bugs and maintenance problems are sure to follow. Duplicated code has a tendency to both continue to replicate and also to diverge (leaving bugs as two similar implementations differ in subtle ways).

Tuning

This issue has a mass of 48.

We set useful threshold defaults for the languages we support but you may want to adjust these settings based on your project guidelines.

The threshold configuration represents the minimum mass a code block must have to be analyzed for duplication. The lower the threshold, the more fine-grained the comparison.

If the engine is too easily reporting duplication, try raising the threshold. If you suspect that the engine isn't catching enough duplication, try lowering the threshold. The best setting tends to differ from language to language.

See codeclimate-duplication's documentation for more information about tuning the mass threshold in your .codeclimate.yml.

Refactorings

Further Reading

Identical blocks of code found in 3 locations. Consider refactoring.
Open

      if (StringUtils.isNotEmpty(metadata.rights)) {
        XMLNode rightsNode = new XMLNode(new XMLTriple(RIGHTS_TAG, "", RIGHTS_NS));
        rightsNode.addChild(new XMLNode(metadata.rights));
        pmfNode.addChild(rightsNode);
      }
Severity: Minor
Found in de.bund.bfr.knime.fsklab.deprecatednodes/src-1_0_2/de/bund/bfr/knime/fsklab/nodes/MetadataDocument.java and 2 other locations - About 40 mins to fix
de.bund.bfr.knime.fsklab.deprecatednodes/src-1_0_2/de/bund/bfr/knime/fsklab/nodes/MetadataDocument.java on lines 475..479
de.bund.bfr.knime.fsklab.deprecatednodes/src-1_0_2/de/bund/bfr/knime/fsklab/nodes/MetadataDocument.java on lines 482..486

Duplicated Code

Duplicated code can lead to software that is hard to understand and difficult to change. The Don't Repeat Yourself (DRY) principle states:

Every piece of knowledge must have a single, unambiguous, authoritative representation within a system.

When you violate DRY, bugs and maintenance problems are sure to follow. Duplicated code has a tendency to both continue to replicate and also to diverge (leaving bugs as two similar implementations differ in subtle ways).

Tuning

This issue has a mass of 48.

We set useful threshold defaults for the languages we support but you may want to adjust these settings based on your project guidelines.

The threshold configuration represents the minimum mass a code block must have to be analyzed for duplication. The lower the threshold, the more fine-grained the comparison.

If the engine is too easily reporting duplication, try raising the threshold. If you suspect that the engine isn't catching enough duplication, try lowering the threshold. The best setting tends to differ from language to language.

See codeclimate-duplication's documentation for more information about tuning the mass threshold in your .codeclimate.yml.

Refactorings

Further Reading

Identical blocks of code found in 3 locations. Consider refactoring.
Open

        if (containsData) {
            chartCreator.setColorLists(selectionPanel.getColorLists());
            chartCreator.setShapeLists(selectionPanel.getShapeLists());
        } else {
            chartCreator.setColors(selectionPanel.getColors());
Severity: Minor
Found in de.bund.bfr.knime.pmm.nodes/src/de/bund/bfr/knime/pmm/secondarymodelanddataview/SecondaryModelAndDataViewNodeDialog.java and 2 other locations - About 40 mins to fix
de.bund.bfr.knime.pmm.nodes/src/de/bund/bfr/knime/pmm/secondarymodelanddataview/SecondaryModelAndDataViewNodeDialog.java on lines 202..208
de.bund.bfr.knime.pmm.nodes/src/de/bund/bfr/knime/pmm/secondarymodelanddataview/SecondaryModelAndDataViewNodeModel.java on lines 148..154

Duplicated Code

Duplicated code can lead to software that is hard to understand and difficult to change. The Don't Repeat Yourself (DRY) principle states:

Every piece of knowledge must have a single, unambiguous, authoritative representation within a system.

When you violate DRY, bugs and maintenance problems are sure to follow. Duplicated code has a tendency to both continue to replicate and also to diverge (leaving bugs as two similar implementations differ in subtle ways).

Tuning

This issue has a mass of 48.

We set useful threshold defaults for the languages we support but you may want to adjust these settings based on your project guidelines.

The threshold configuration represents the minimum mass a code block must have to be analyzed for duplication. The lower the threshold, the more fine-grained the comparison.

If the engine is too easily reporting duplication, try raising the threshold. If you suspect that the engine isn't catching enough duplication, try lowering the threshold. The best setting tends to differ from language to language.

See codeclimate-duplication's documentation for more information about tuning the mass threshold in your .codeclimate.yml.

Refactorings

Further Reading

Identical blocks of code found in 3 locations. Consider refactoring.
Open

      if (StringUtils.isNotEmpty(metadata.referenceDescription)) {
        XMLNode refdescNode = new XMLNode(new XMLTriple(REFDESC_TAG, "", REFDESC_NS));
        refdescNode.addChild(new XMLNode(metadata.referenceDescription));
        pmfNode.addChild(refdescNode);
      }
Severity: Minor
Found in de.bund.bfr.knime.fsklab.deprecatednodes/src-1_0_2/de/bund/bfr/knime/fsklab/nodes/MetadataDocument.java and 2 other locations - About 40 mins to fix
de.bund.bfr.knime.fsklab.deprecatednodes/src-1_0_2/de/bund/bfr/knime/fsklab/nodes/MetadataDocument.java on lines 468..472
de.bund.bfr.knime.fsklab.deprecatednodes/src-1_0_2/de/bund/bfr/knime/fsklab/nodes/MetadataDocument.java on lines 482..486

Duplicated Code

Duplicated code can lead to software that is hard to understand and difficult to change. The Don't Repeat Yourself (DRY) principle states:

Every piece of knowledge must have a single, unambiguous, authoritative representation within a system.

When you violate DRY, bugs and maintenance problems are sure to follow. Duplicated code has a tendency to both continue to replicate and also to diverge (leaving bugs as two similar implementations differ in subtle ways).

Tuning

This issue has a mass of 48.

We set useful threshold defaults for the languages we support but you may want to adjust these settings based on your project guidelines.

The threshold configuration represents the minimum mass a code block must have to be analyzed for duplication. The lower the threshold, the more fine-grained the comparison.

If the engine is too easily reporting duplication, try raising the threshold. If you suspect that the engine isn't catching enough duplication, try lowering the threshold. The best setting tends to differ from language to language.

See codeclimate-duplication's documentation for more information about tuning the mass threshold in your .codeclimate.yml.

Refactorings

Further Reading

Identical blocks of code found in 2 locations. Consider refactoring.
Open

        try {
            final Cell subjectCell = sheet.getRow(SUBJECT).getCell(5);
            if (subjectCell.getCellType() == Cell.CELL_TYPE_STRING) {
                template.subject = ModelClass.valueOf(subjectCell.getStringCellValue());
            }
Severity: Minor
Found in de.bund.bfr.knime.fsklab.metadata.model/src/metadata/LegacyMetadataImporter.java and 1 other location - About 40 mins to fix
de.bund.bfr.knime.fsklab.metadata.model/src/metadata/LegacyMetadataImporter.java on lines 109..114

Duplicated Code

Duplicated code can lead to software that is hard to understand and difficult to change. The Don't Repeat Yourself (DRY) principle states:

Every piece of knowledge must have a single, unambiguous, authoritative representation within a system.

When you violate DRY, bugs and maintenance problems are sure to follow. Duplicated code has a tendency to both continue to replicate and also to diverge (leaving bugs as two similar implementations differ in subtle ways).

Tuning

This issue has a mass of 48.

We set useful threshold defaults for the languages we support but you may want to adjust these settings based on your project guidelines.

The threshold configuration represents the minimum mass a code block must have to be analyzed for duplication. The lower the threshold, the more fine-grained the comparison.

If the engine is too easily reporting duplication, try raising the threshold. If you suspect that the engine isn't catching enough duplication, try lowering the threshold. The best setting tends to differ from language to language.

See codeclimate-duplication's documentation for more information about tuning the mass threshold in your .codeclimate.yml.

Refactorings

Further Reading

Identical blocks of code found in 2 locations. Consider refactoring.
Open

                } else if (mapping.equals(AttributeUtilities.AGENT_DETAILS)) {
                    agentDetailsColumn = columns.get(column);
                } else if (mapping.equals(AttributeUtilities.MATRIX_DETAILS)) {
                    matrixDetailsColumn = columns.get(column);
                }
Severity: Minor
Found in de.bund.bfr.knime.pmm.common/src/de/bund/bfr/knime/pmm/common/XLSReader.java and 1 other location - About 40 mins to fix
de.bund.bfr.knime.pmm.common/src/de/bund/bfr/knime/pmm/common/XLSReader.java on lines 132..136

Duplicated Code

Duplicated code can lead to software that is hard to understand and difficult to change. The Don't Repeat Yourself (DRY) principle states:

Every piece of knowledge must have a single, unambiguous, authoritative representation within a system.

When you violate DRY, bugs and maintenance problems are sure to follow. Duplicated code has a tendency to both continue to replicate and also to diverge (leaving bugs as two similar implementations differ in subtle ways).

Tuning

This issue has a mass of 48.

We set useful threshold defaults for the languages we support but you may want to adjust these settings based on your project guidelines.

The threshold configuration represents the minimum mass a code block must have to be analyzed for duplication. The lower the threshold, the more fine-grained the comparison.

If the engine is too easily reporting duplication, try raising the threshold. If you suspect that the engine isn't catching enough duplication, try lowering the threshold. The best setting tends to differ from language to language.

See codeclimate-duplication's documentation for more information about tuning the mass threshold in your .codeclimate.yml.

Refactorings

Further Reading

Identical blocks of code found in 2 locations. Consider refactoring.
Open

                    if (filesInDir.length > 0) {
                        List<String> fnames = Arrays.stream(filesInDir).map(File::getName).collect(Collectors.toList());
                        libChooser.replaceListItems(fnames, (String[]) null);
                    }
Severity: Minor
Found in de.bund.bfr.knime.fsklab.deprecatednodes/src-prerakip/de/bund/bfr/knime/pmm/fskx/creator/FskxCreatorNodeDialog.java and 1 other location - About 40 mins to fix
de.bund.bfr.knime.pmm.nodes/src/de/bund/bfr/knime/pmm/openfsmr/OpenFSMRConverterNodeDialog.java on lines 91..95

Duplicated Code

Duplicated code can lead to software that is hard to understand and difficult to change. The Don't Repeat Yourself (DRY) principle states:

Every piece of knowledge must have a single, unambiguous, authoritative representation within a system.

When you violate DRY, bugs and maintenance problems are sure to follow. Duplicated code has a tendency to both continue to replicate and also to diverge (leaving bugs as two similar implementations differ in subtle ways).

Tuning

This issue has a mass of 48.

We set useful threshold defaults for the languages we support but you may want to adjust these settings based on your project guidelines.

The threshold configuration represents the minimum mass a code block must have to be analyzed for duplication. The lower the threshold, the more fine-grained the comparison.

If the engine is too easily reporting duplication, try raising the threshold. If you suspect that the engine isn't catching enough duplication, try lowering the threshold. The best setting tends to differ from language to language.

See codeclimate-duplication's documentation for more information about tuning the mass threshold in your .codeclimate.yml.

Refactorings

Further Reading

Identical blocks of code found in 2 locations. Consider refactoring.
Open

        if (filesInDir.length > 0) {
          List<String> fnames =
              Arrays.stream(filesInDir).map(File::getName).collect(Collectors.toList());
          filesChooser.replaceListItems(fnames, (String[]) null);
        }
Severity: Minor
Found in de.bund.bfr.knime.pmm.nodes/src/de/bund/bfr/knime/pmm/openfsmr/OpenFSMRConverterNodeDialog.java and 1 other location - About 40 mins to fix
de.bund.bfr.knime.fsklab.deprecatednodes/src-prerakip/de/bund/bfr/knime/pmm/fskx/creator/FskxCreatorNodeDialog.java on lines 89..92

Duplicated Code

Duplicated code can lead to software that is hard to understand and difficult to change. The Don't Repeat Yourself (DRY) principle states:

Every piece of knowledge must have a single, unambiguous, authoritative representation within a system.

When you violate DRY, bugs and maintenance problems are sure to follow. Duplicated code has a tendency to both continue to replicate and also to diverge (leaving bugs as two similar implementations differ in subtle ways).

Tuning

This issue has a mass of 48.

We set useful threshold defaults for the languages we support but you may want to adjust these settings based on your project guidelines.

The threshold configuration represents the minimum mass a code block must have to be analyzed for duplication. The lower the threshold, the more fine-grained the comparison.

If the engine is too easily reporting duplication, try raising the threshold. If you suspect that the engine isn't catching enough duplication, try lowering the threshold. The best setting tends to differ from language to language.

See codeclimate-duplication's documentation for more information about tuning the mass threshold in your .codeclimate.yml.

Refactorings

Further Reading

Identical blocks of code found in 2 locations. Consider refactoring.
Open

            if (portObject.template != null) {
                out.putNextEntry(new ZipEntry(META_DATA));
                ObjectOutputStream oos = new ObjectOutputStream(out);
                oos.writeObject(portObject.template);
                out.closeEntry();
Severity: Minor
Found in de.bund.bfr.knime.fsklab.deprecatednodes/src-1_0_2/de/bund/bfr/knime/pmm/fskx/port/FskPortObject.java and 1 other location - About 40 mins to fix
de.bund.bfr.knime.fsklab.deprecatednodes/src-prerakip/de/bund/bfr/knime/fsklab/nodes/port/FskPortObject.java on lines 163..168

Duplicated Code

Duplicated code can lead to software that is hard to understand and difficult to change. The Don't Repeat Yourself (DRY) principle states:

Every piece of knowledge must have a single, unambiguous, authoritative representation within a system.

When you violate DRY, bugs and maintenance problems are sure to follow. Duplicated code has a tendency to both continue to replicate and also to diverge (leaving bugs as two similar implementations differ in subtle ways).

Tuning

This issue has a mass of 48.

We set useful threshold defaults for the languages we support but you may want to adjust these settings based on your project guidelines.

The threshold configuration represents the minimum mass a code block must have to be analyzed for duplication. The lower the threshold, the more fine-grained the comparison.

If the engine is too easily reporting duplication, try raising the threshold. If you suspect that the engine isn't catching enough duplication, try lowering the threshold. The best setting tends to differ from language to language.

See codeclimate-duplication's documentation for more information about tuning the mass threshold in your .codeclimate.yml.

Refactorings

Further Reading

Identical blocks of code found in 2 locations. Consider refactoring.
Open

        while (true) {
            exec.checkCanceled();
            exec.setProgress(Float.intBitsToFloat(progress.get()), "");

            if (!thread.isAlive()) {
Severity: Minor
Found in de.bund.bfr.knime.pmm.nodes/src/de/bund/bfr/knime/pmm/modelestimation/ModelEstimationNodeModel.java and 1 other location - About 40 mins to fix
de.bund.bfr.knime.pmm.nodes/src/de/bund/bfr/knime/pmm/modelestimation/ModelEstimationNodeModel.java on lines 372..381

Duplicated Code

Duplicated code can lead to software that is hard to understand and difficult to change. The Don't Repeat Yourself (DRY) principle states:

Every piece of knowledge must have a single, unambiguous, authoritative representation within a system.

When you violate DRY, bugs and maintenance problems are sure to follow. Duplicated code has a tendency to both continue to replicate and also to diverge (leaving bugs as two similar implementations differ in subtle ways).

Tuning

This issue has a mass of 48.

We set useful threshold defaults for the languages we support but you may want to adjust these settings based on your project guidelines.

The threshold configuration represents the minimum mass a code block must have to be analyzed for duplication. The lower the threshold, the more fine-grained the comparison.

If the engine is too easily reporting duplication, try raising the threshold. If you suspect that the engine isn't catching enough duplication, try lowering the threshold. The best setting tends to differ from language to language.

See codeclimate-duplication's documentation for more information about tuning the mass threshold in your .codeclimate.yml.

Refactorings

Further Reading

Identical blocks of code found in 2 locations. Consider refactoring.
Open

                } else if (mapping.equals(AttributeUtilities.AGENT_DETAILS)) {
                    agentDetailsColumn = columns.get(column);
                } else if (mapping.equals(AttributeUtilities.MATRIX_DETAILS)) {
                    matrixDetailsColumn = columns.get(column);
                }
Severity: Minor
Found in de.bund.bfr.knime.pmm.common/src/de/bund/bfr/knime/pmm/common/XLSReader.java and 1 other location - About 40 mins to fix
de.bund.bfr.knime.pmm.common/src/de/bund/bfr/knime/pmm/common/XLSReader.java on lines 418..422

Duplicated Code

Duplicated code can lead to software that is hard to understand and difficult to change. The Don't Repeat Yourself (DRY) principle states:

Every piece of knowledge must have a single, unambiguous, authoritative representation within a system.

When you violate DRY, bugs and maintenance problems are sure to follow. Duplicated code has a tendency to both continue to replicate and also to diverge (leaving bugs as two similar implementations differ in subtle ways).

Tuning

This issue has a mass of 48.

We set useful threshold defaults for the languages we support but you may want to adjust these settings based on your project guidelines.

The threshold configuration represents the minimum mass a code block must have to be analyzed for duplication. The lower the threshold, the more fine-grained the comparison.

If the engine is too easily reporting duplication, try raising the threshold. If you suspect that the engine isn't catching enough duplication, try lowering the threshold. The best setting tends to differ from language to language.

See codeclimate-duplication's documentation for more information about tuning the mass threshold in your .codeclimate.yml.

Refactorings

Further Reading

Identical blocks of code found in 2 locations. Consider refactoring.
Open

                                        if (gid.indexOf("#") > 0) gid = gid.substring(gid.indexOf("#") + 1) + "#"; // estLit#elementSet/0#
                                        else {
                                            System.err.println(gid);
                                            //gid = "";
                                        }
Severity: Minor
Found in de.bund.bfr.knime.pmm.nodes/src/de/bund/bfr/knime/pmm/manualmodelconf/ManualModelEditorNodeDialog.java and 1 other location - About 40 mins to fix
de.bund.bfr.knime.pmm.nodes/src/de/bund/bfr/knime/pmm/manualmodelconf/ManualModelEditorNodeDialog.java on lines 345..349

Duplicated Code

Duplicated code can lead to software that is hard to understand and difficult to change. The Don't Repeat Yourself (DRY) principle states:

Every piece of knowledge must have a single, unambiguous, authoritative representation within a system.

When you violate DRY, bugs and maintenance problems are sure to follow. Duplicated code has a tendency to both continue to replicate and also to diverge (leaving bugs as two similar implementations differ in subtle ways).

Tuning

This issue has a mass of 48.

We set useful threshold defaults for the languages we support but you may want to adjust these settings based on your project guidelines.

The threshold configuration represents the minimum mass a code block must have to be analyzed for duplication. The lower the threshold, the more fine-grained the comparison.

If the engine is too easily reporting duplication, try raising the threshold. If you suspect that the engine isn't catching enough duplication, try lowering the threshold. The best setting tends to differ from language to language.

See codeclimate-duplication's documentation for more information about tuning the mass threshold in your .codeclimate.yml.

Refactorings

Further Reading

Identical blocks of code found in 2 locations. Consider refactoring.
Open

            if (portObject.template != null) {
                out.putNextEntry(new ZipEntry(META_DATA));
                ObjectOutputStream oos = new ObjectOutputStream(out);
                oos.writeObject(portObject.template);
                out.closeEntry();
Severity: Minor
Found in de.bund.bfr.knime.fsklab.deprecatednodes/src-prerakip/de/bund/bfr/knime/fsklab/nodes/port/FskPortObject.java and 1 other location - About 40 mins to fix
de.bund.bfr.knime.fsklab.deprecatednodes/src-1_0_2/de/bund/bfr/knime/pmm/fskx/port/FskPortObject.java on lines 157..162

Duplicated Code

Duplicated code can lead to software that is hard to understand and difficult to change. The Don't Repeat Yourself (DRY) principle states:

Every piece of knowledge must have a single, unambiguous, authoritative representation within a system.

When you violate DRY, bugs and maintenance problems are sure to follow. Duplicated code has a tendency to both continue to replicate and also to diverge (leaving bugs as two similar implementations differ in subtle ways).

Tuning

This issue has a mass of 48.

We set useful threshold defaults for the languages we support but you may want to adjust these settings based on your project guidelines.

The threshold configuration represents the minimum mass a code block must have to be analyzed for duplication. The lower the threshold, the more fine-grained the comparison.

If the engine is too easily reporting duplication, try raising the threshold. If you suspect that the engine isn't catching enough duplication, try lowering the threshold. The best setting tends to differ from language to language.

See codeclimate-duplication's documentation for more information about tuning the mass threshold in your .codeclimate.yml.

Refactorings

Further Reading

Identical blocks of code found in 2 locations. Consider refactoring.
Open

        try {
            final Cell typeCell = sheet.getRow(TYPE).getCell(5);
            if (typeCell.getCellType() == Cell.CELL_TYPE_STRING) {
                template.type = ModelType.valueOf(typeCell.getStringCellValue());
            }
Severity: Minor
Found in de.bund.bfr.knime.fsklab.metadata.model/src/metadata/LegacyMetadataImporter.java and 1 other location - About 40 mins to fix
de.bund.bfr.knime.fsklab.metadata.model/src/metadata/LegacyMetadataImporter.java on lines 117..122

Duplicated Code

Duplicated code can lead to software that is hard to understand and difficult to change. The Don't Repeat Yourself (DRY) principle states:

Every piece of knowledge must have a single, unambiguous, authoritative representation within a system.

When you violate DRY, bugs and maintenance problems are sure to follow. Duplicated code has a tendency to both continue to replicate and also to diverge (leaving bugs as two similar implementations differ in subtle ways).

Tuning

This issue has a mass of 48.

We set useful threshold defaults for the languages we support but you may want to adjust these settings based on your project guidelines.

The threshold configuration represents the minimum mass a code block must have to be analyzed for duplication. The lower the threshold, the more fine-grained the comparison.

If the engine is too easily reporting duplication, try raising the threshold. If you suspect that the engine isn't catching enough duplication, try lowering the threshold. The best setting tends to differ from language to language.

See codeclimate-duplication's documentation for more information about tuning the mass threshold in your .codeclimate.yml.

Refactorings

Further Reading

Identical blocks of code found in 2 locations. Consider refactoring.
Open

                    tuple.setValue(Model2Schema.ATT_INDEPENDENT, DbIo.convertArrays2IndepXmlDoc(null, result.getArray(Bfrdb.ATT_INDEP), null, null,
                            result.getArray("IndepCategory"), result.getArray("IndepUnit"), result.getArray("IndepDescription"), false));
Severity: Minor
Found in de.bund.bfr.knime.pmm.bfrdbiface.lib/src/de/bund/bfr/knime/pmm/bfrdbiface/lib/Bfrdb.java and 1 other location - About 40 mins to fix
de.bund.bfr.knime.pmm.bfrdbiface.lib/src/de/bund/bfr/knime/pmm/bfrdbiface/lib/Bfrdb.java on lines 304..305

Duplicated Code

Duplicated code can lead to software that is hard to understand and difficult to change. The Don't Repeat Yourself (DRY) principle states:

Every piece of knowledge must have a single, unambiguous, authoritative representation within a system.

When you violate DRY, bugs and maintenance problems are sure to follow. Duplicated code has a tendency to both continue to replicate and also to diverge (leaving bugs as two similar implementations differ in subtle ways).

Tuning

This issue has a mass of 48.

We set useful threshold defaults for the languages we support but you may want to adjust these settings based on your project guidelines.

The threshold configuration represents the minimum mass a code block must have to be analyzed for duplication. The lower the threshold, the more fine-grained the comparison.

If the engine is too easily reporting duplication, try raising the threshold. If you suspect that the engine isn't catching enough duplication, try lowering the threshold. The best setting tends to differ from language to language.

See codeclimate-duplication's documentation for more information about tuning the mass threshold in your .codeclimate.yml.

Refactorings

Further Reading

Identical blocks of code found in 2 locations. Consider refactoring.
Open

        while (true) {
            exec.checkCanceled();
            exec.setProgress(Float.intBitsToFloat(progress.get()), "");

            if (!thread.isAlive()) {
Severity: Minor
Found in de.bund.bfr.knime.pmm.nodes/src/de/bund/bfr/knime/pmm/modelestimation/ModelEstimationNodeModel.java and 1 other location - About 40 mins to fix
de.bund.bfr.knime.pmm.nodes/src/de/bund/bfr/knime/pmm/modelestimation/ModelEstimationNodeModel.java on lines 415..424

Duplicated Code

Duplicated code can lead to software that is hard to understand and difficult to change. The Don't Repeat Yourself (DRY) principle states:

Every piece of knowledge must have a single, unambiguous, authoritative representation within a system.

When you violate DRY, bugs and maintenance problems are sure to follow. Duplicated code has a tendency to both continue to replicate and also to diverge (leaving bugs as two similar implementations differ in subtle ways).

Tuning

This issue has a mass of 48.

We set useful threshold defaults for the languages we support but you may want to adjust these settings based on your project guidelines.

The threshold configuration represents the minimum mass a code block must have to be analyzed for duplication. The lower the threshold, the more fine-grained the comparison.

If the engine is too easily reporting duplication, try raising the threshold. If you suspect that the engine isn't catching enough duplication, try lowering the threshold. The best setting tends to differ from language to language.

See codeclimate-duplication's documentation for more information about tuning the mass threshold in your .codeclimate.yml.

Refactorings

Further Reading

Identical blocks of code found in 2 locations. Consider refactoring.
Open

                                        if (gid.indexOf("#") > 0) gid = gid.substring(gid.indexOf("#") + 1) + "#"; // estLit#elementSet/0#
                                        else {
                                            System.err.println(gid);
                                            //gid = "";
                                        }
Severity: Minor
Found in de.bund.bfr.knime.pmm.nodes/src/de/bund/bfr/knime/pmm/manualmodelconf/ManualModelEditorNodeDialog.java and 1 other location - About 40 mins to fix
de.bund.bfr.knime.pmm.nodes/src/de/bund/bfr/knime/pmm/manualmodelconf/ManualModelEditorNodeDialog.java on lines 356..360

Duplicated Code

Duplicated code can lead to software that is hard to understand and difficult to change. The Don't Repeat Yourself (DRY) principle states:

Every piece of knowledge must have a single, unambiguous, authoritative representation within a system.

When you violate DRY, bugs and maintenance problems are sure to follow. Duplicated code has a tendency to both continue to replicate and also to diverge (leaving bugs as two similar implementations differ in subtle ways).

Tuning

This issue has a mass of 48.

We set useful threshold defaults for the languages we support but you may want to adjust these settings based on your project guidelines.

The threshold configuration represents the minimum mass a code block must have to be analyzed for duplication. The lower the threshold, the more fine-grained the comparison.

If the engine is too easily reporting duplication, try raising the threshold. If you suspect that the engine isn't catching enough duplication, try lowering the threshold. The best setting tends to differ from language to language.

See codeclimate-duplication's documentation for more information about tuning the mass threshold in your .codeclimate.yml.

Refactorings

Further Reading

Identical blocks of code found in 2 locations. Consider refactoring.
Open

                    tuple.setValue(Model1Schema.ATT_INDEPENDENT, DbIo.convertArrays2IndepXmlDoc(null, result.getArray(Bfrdb.ATT_INDEP), null, null,
                            result.getArray("IndepCategory"), result.getArray("IndepUnit"), result.getArray("IndepDescription"), true));
Severity: Minor
Found in de.bund.bfr.knime.pmm.bfrdbiface.lib/src/de/bund/bfr/knime/pmm/bfrdbiface/lib/Bfrdb.java and 1 other location - About 40 mins to fix
de.bund.bfr.knime.pmm.bfrdbiface.lib/src/de/bund/bfr/knime/pmm/bfrdbiface/lib/Bfrdb.java on lines 359..360

Duplicated Code

Duplicated code can lead to software that is hard to understand and difficult to change. The Don't Repeat Yourself (DRY) principle states:

Every piece of knowledge must have a single, unambiguous, authoritative representation within a system.

When you violate DRY, bugs and maintenance problems are sure to follow. Duplicated code has a tendency to both continue to replicate and also to diverge (leaving bugs as two similar implementations differ in subtle ways).

Tuning

This issue has a mass of 48.

We set useful threshold defaults for the languages we support but you may want to adjust these settings based on your project guidelines.

The threshold configuration represents the minimum mass a code block must have to be analyzed for duplication. The lower the threshold, the more fine-grained the comparison.

If the engine is too easily reporting duplication, try raising the threshold. If you suspect that the engine isn't catching enough duplication, try lowering the threshold. The best setting tends to differ from language to language.

See codeclimate-duplication's documentation for more information about tuning the mass threshold in your .codeclimate.yml.

Refactorings

Further Reading

Severity
Category
Status
Source
Language