Sign upLogin

SiLeBAT/FSK-Lab

View on GitHub
Star

Showing 14,752 of 14,752 total issues

Similar blocks of code found in 13 locations. Consider refactoring.
Open

                                    : "") + (rs.getObject("Telefon") != null ? DBKernel.delimitL("Telefon") + "='" + rs.getString("Telefon").replace("'", "''") + "'," : "")
Severity: Major
Found in org.hsh.bfr.db/src/org/hsh/bfr/db/UpdateChecker.java and 12 other locations - About 35 mins to fix
org.hsh.bfr.db/src/org/hsh/bfr/db/UpdateChecker.java on lines 555..555
org.hsh.bfr.db/src/org/hsh/bfr/db/UpdateChecker.java on lines 556..556
org.hsh.bfr.db/src/org/hsh/bfr/db/UpdateChecker.java on lines 557..557
org.hsh.bfr.db/src/org/hsh/bfr/db/UpdateChecker.java on lines 558..558
org.hsh.bfr.db/src/org/hsh/bfr/db/UpdateChecker.java on lines 559..559
org.hsh.bfr.db/src/org/hsh/bfr/db/UpdateChecker.java on lines 560..560
org.hsh.bfr.db/src/org/hsh/bfr/db/UpdateChecker.java on lines 561..561
org.hsh.bfr.db/src/org/hsh/bfr/db/UpdateChecker.java on lines 562..562
org.hsh.bfr.db/src/org/hsh/bfr/db/UpdateChecker.java on lines 563..564
org.hsh.bfr.db/src/org/hsh/bfr/db/UpdateChecker.java on lines 565..565
org.hsh.bfr.db/src/org/hsh/bfr/db/UpdateChecker.java on lines 566..566
org.hsh.bfr.db/src/org/hsh/bfr/db/UpdateChecker.java on lines 567..567

Duplicated Code

Duplicated code can lead to software that is hard to understand and difficult to change. The Don't Repeat Yourself (DRY) principle states:

Every piece of knowledge must have a single, unambiguous, authoritative representation within a system.

When you violate DRY, bugs and maintenance problems are sure to follow. Duplicated code has a tendency to both continue to replicate and also to diverge (leaving bugs as two similar implementations differ in subtle ways).

Tuning

This issue has a mass of 44.

We set useful threshold defaults for the languages we support but you may want to adjust these settings based on your project guidelines.

The threshold configuration represents the minimum mass a code block must have to be analyzed for duplication. The lower the threshold, the more fine-grained the comparison.

If the engine is too easily reporting duplication, try raising the threshold. If you suspect that the engine isn't catching enough duplication, try lowering the threshold. The best setting tends to differ from language to language.

See codeclimate-duplication's documentation for more information about tuning the mass threshold in your .codeclimate.yml.

Refactorings

Further Reading

Similar blocks of code found in 13 locations. Consider refactoring.
Open

                            + (rs.getObject("Strasse") != null ? DBKernel.delimitL("Strasse") + "='" + rs.getString("Strasse").replace("'", "''") + "'," : "")
Severity: Major
Found in org.hsh.bfr.db/src/org/hsh/bfr/db/UpdateChecker.java and 12 other locations - About 35 mins to fix
org.hsh.bfr.db/src/org/hsh/bfr/db/UpdateChecker.java on lines 555..555
org.hsh.bfr.db/src/org/hsh/bfr/db/UpdateChecker.java on lines 557..557
org.hsh.bfr.db/src/org/hsh/bfr/db/UpdateChecker.java on lines 558..558
org.hsh.bfr.db/src/org/hsh/bfr/db/UpdateChecker.java on lines 559..559
org.hsh.bfr.db/src/org/hsh/bfr/db/UpdateChecker.java on lines 560..560
org.hsh.bfr.db/src/org/hsh/bfr/db/UpdateChecker.java on lines 561..561
org.hsh.bfr.db/src/org/hsh/bfr/db/UpdateChecker.java on lines 562..562
org.hsh.bfr.db/src/org/hsh/bfr/db/UpdateChecker.java on lines 563..564
org.hsh.bfr.db/src/org/hsh/bfr/db/UpdateChecker.java on lines 564..564
org.hsh.bfr.db/src/org/hsh/bfr/db/UpdateChecker.java on lines 565..565
org.hsh.bfr.db/src/org/hsh/bfr/db/UpdateChecker.java on lines 566..566
org.hsh.bfr.db/src/org/hsh/bfr/db/UpdateChecker.java on lines 567..567

Duplicated Code

Duplicated code can lead to software that is hard to understand and difficult to change. The Don't Repeat Yourself (DRY) principle states:

Every piece of knowledge must have a single, unambiguous, authoritative representation within a system.

When you violate DRY, bugs and maintenance problems are sure to follow. Duplicated code has a tendency to both continue to replicate and also to diverge (leaving bugs as two similar implementations differ in subtle ways).

Tuning

This issue has a mass of 44.

We set useful threshold defaults for the languages we support but you may want to adjust these settings based on your project guidelines.

The threshold configuration represents the minimum mass a code block must have to be analyzed for duplication. The lower the threshold, the more fine-grained the comparison.

If the engine is too easily reporting duplication, try raising the threshold. If you suspect that the engine isn't catching enough duplication, try lowering the threshold. The best setting tends to differ from language to language.

See codeclimate-duplication's documentation for more information about tuning the mass threshold in your .codeclimate.yml.

Refactorings

Further Reading

Similar blocks of code found in 13 locations. Consider refactoring.
Open

                            + (rs.getObject("Ort") != null ? DBKernel.delimitL("Ort") + "='" + rs.getString("Ort").replace("'", "''") + "'," : "")
Severity: Major
Found in org.hsh.bfr.db/src/org/hsh/bfr/db/UpdateChecker.java and 12 other locations - About 35 mins to fix
org.hsh.bfr.db/src/org/hsh/bfr/db/UpdateChecker.java on lines 555..555
org.hsh.bfr.db/src/org/hsh/bfr/db/UpdateChecker.java on lines 556..556
org.hsh.bfr.db/src/org/hsh/bfr/db/UpdateChecker.java on lines 557..557
org.hsh.bfr.db/src/org/hsh/bfr/db/UpdateChecker.java on lines 558..558
org.hsh.bfr.db/src/org/hsh/bfr/db/UpdateChecker.java on lines 559..559
org.hsh.bfr.db/src/org/hsh/bfr/db/UpdateChecker.java on lines 561..561
org.hsh.bfr.db/src/org/hsh/bfr/db/UpdateChecker.java on lines 562..562
org.hsh.bfr.db/src/org/hsh/bfr/db/UpdateChecker.java on lines 563..564
org.hsh.bfr.db/src/org/hsh/bfr/db/UpdateChecker.java on lines 564..564
org.hsh.bfr.db/src/org/hsh/bfr/db/UpdateChecker.java on lines 565..565
org.hsh.bfr.db/src/org/hsh/bfr/db/UpdateChecker.java on lines 566..566
org.hsh.bfr.db/src/org/hsh/bfr/db/UpdateChecker.java on lines 567..567

Duplicated Code

Duplicated code can lead to software that is hard to understand and difficult to change. The Don't Repeat Yourself (DRY) principle states:

Every piece of knowledge must have a single, unambiguous, authoritative representation within a system.

When you violate DRY, bugs and maintenance problems are sure to follow. Duplicated code has a tendency to both continue to replicate and also to diverge (leaving bugs as two similar implementations differ in subtle ways).

Tuning

This issue has a mass of 44.

We set useful threshold defaults for the languages we support but you may want to adjust these settings based on your project guidelines.

The threshold configuration represents the minimum mass a code block must have to be analyzed for duplication. The lower the threshold, the more fine-grained the comparison.

If the engine is too easily reporting duplication, try raising the threshold. If you suspect that the engine isn't catching enough duplication, try lowering the threshold. The best setting tends to differ from language to language.

See codeclimate-duplication's documentation for more information about tuning the mass threshold in your .codeclimate.yml.

Refactorings

Further Reading

Similar blocks of code found in 13 locations. Consider refactoring.
Open

                            + (rs.getObject("EMail") != null ? DBKernel.delimitL("EMail") + "='" + rs.getString("EMail").replace("'", "''") + "'," : "")
Severity: Major
Found in org.hsh.bfr.db/src/org/hsh/bfr/db/UpdateChecker.java and 12 other locations - About 35 mins to fix
org.hsh.bfr.db/src/org/hsh/bfr/db/UpdateChecker.java on lines 555..555
org.hsh.bfr.db/src/org/hsh/bfr/db/UpdateChecker.java on lines 556..556
org.hsh.bfr.db/src/org/hsh/bfr/db/UpdateChecker.java on lines 557..557
org.hsh.bfr.db/src/org/hsh/bfr/db/UpdateChecker.java on lines 558..558
org.hsh.bfr.db/src/org/hsh/bfr/db/UpdateChecker.java on lines 559..559
org.hsh.bfr.db/src/org/hsh/bfr/db/UpdateChecker.java on lines 560..560
org.hsh.bfr.db/src/org/hsh/bfr/db/UpdateChecker.java on lines 561..561
org.hsh.bfr.db/src/org/hsh/bfr/db/UpdateChecker.java on lines 562..562
org.hsh.bfr.db/src/org/hsh/bfr/db/UpdateChecker.java on lines 563..564
org.hsh.bfr.db/src/org/hsh/bfr/db/UpdateChecker.java on lines 564..564
org.hsh.bfr.db/src/org/hsh/bfr/db/UpdateChecker.java on lines 565..565
org.hsh.bfr.db/src/org/hsh/bfr/db/UpdateChecker.java on lines 567..567

Duplicated Code

Duplicated code can lead to software that is hard to understand and difficult to change. The Don't Repeat Yourself (DRY) principle states:

Every piece of knowledge must have a single, unambiguous, authoritative representation within a system.

When you violate DRY, bugs and maintenance problems are sure to follow. Duplicated code has a tendency to both continue to replicate and also to diverge (leaving bugs as two similar implementations differ in subtle ways).

Tuning

This issue has a mass of 44.

We set useful threshold defaults for the languages we support but you may want to adjust these settings based on your project guidelines.

The threshold configuration represents the minimum mass a code block must have to be analyzed for duplication. The lower the threshold, the more fine-grained the comparison.

If the engine is too easily reporting duplication, try raising the threshold. If you suspect that the engine isn't catching enough duplication, try lowering the threshold. The best setting tends to differ from language to language.

See codeclimate-duplication's documentation for more information about tuning the mass threshold in your .codeclimate.yml.

Refactorings

Further Reading

Similar blocks of code found in 13 locations. Consider refactoring.
Open

                            + (rs.getObject("Bundesland") != null ? DBKernel.delimitL("Bundesland") + "='" + rs.getString("Bundesland").replace("'", "''") + "'," : "")
Severity: Major
Found in org.hsh.bfr.db/src/org/hsh/bfr/db/UpdateChecker.java and 12 other locations - About 35 mins to fix
org.hsh.bfr.db/src/org/hsh/bfr/db/UpdateChecker.java on lines 555..555
org.hsh.bfr.db/src/org/hsh/bfr/db/UpdateChecker.java on lines 556..556
org.hsh.bfr.db/src/org/hsh/bfr/db/UpdateChecker.java on lines 557..557
org.hsh.bfr.db/src/org/hsh/bfr/db/UpdateChecker.java on lines 558..558
org.hsh.bfr.db/src/org/hsh/bfr/db/UpdateChecker.java on lines 559..559
org.hsh.bfr.db/src/org/hsh/bfr/db/UpdateChecker.java on lines 560..560
org.hsh.bfr.db/src/org/hsh/bfr/db/UpdateChecker.java on lines 562..562
org.hsh.bfr.db/src/org/hsh/bfr/db/UpdateChecker.java on lines 563..564
org.hsh.bfr.db/src/org/hsh/bfr/db/UpdateChecker.java on lines 564..564
org.hsh.bfr.db/src/org/hsh/bfr/db/UpdateChecker.java on lines 565..565
org.hsh.bfr.db/src/org/hsh/bfr/db/UpdateChecker.java on lines 566..566
org.hsh.bfr.db/src/org/hsh/bfr/db/UpdateChecker.java on lines 567..567

Duplicated Code

Duplicated code can lead to software that is hard to understand and difficult to change. The Don't Repeat Yourself (DRY) principle states:

Every piece of knowledge must have a single, unambiguous, authoritative representation within a system.

When you violate DRY, bugs and maintenance problems are sure to follow. Duplicated code has a tendency to both continue to replicate and also to diverge (leaving bugs as two similar implementations differ in subtle ways).

Tuning

This issue has a mass of 44.

We set useful threshold defaults for the languages we support but you may want to adjust these settings based on your project guidelines.

The threshold configuration represents the minimum mass a code block must have to be analyzed for duplication. The lower the threshold, the more fine-grained the comparison.

If the engine is too easily reporting duplication, try raising the threshold. If you suspect that the engine isn't catching enough duplication, try lowering the threshold. The best setting tends to differ from language to language.

See codeclimate-duplication's documentation for more information about tuning the mass threshold in your .codeclimate.yml.

Refactorings

Further Reading

Identical blocks of code found in 3 locations. Consider refactoring.
Open

        if (configPanel.isDisplayFocusedRow()) {
            id = selectionPanel.getFocusedID();
        } else if (!selectionPanel.getSelectedIDs().isEmpty()) {
            id = selectionPanel.getSelectedIDs().get(0);
        }
Severity: Minor
Found in de.bund.bfr.knime.pmm.nodes/src/de/bund/bfr/knime/pmm/primarymodelviewandselect/PrimaryModelViewAndSelectNodeDialog.java and 2 other locations - About 35 mins to fix
de.bund.bfr.knime.pmm.nodes/src/de/bund/bfr/knime/pmm/dataviewandselect/DataViewAndSelectNodeDialog.java on lines 182..186
de.bund.bfr.knime.pmm.nodes/src/de/bund/bfr/knime/pmm/modelselectiontertiary/ModelSelectionTertiaryNodeDialog.java on lines 195..199

Duplicated Code

Duplicated code can lead to software that is hard to understand and difficult to change. The Don't Repeat Yourself (DRY) principle states:

Every piece of knowledge must have a single, unambiguous, authoritative representation within a system.

When you violate DRY, bugs and maintenance problems are sure to follow. Duplicated code has a tendency to both continue to replicate and also to diverge (leaving bugs as two similar implementations differ in subtle ways).

Tuning

This issue has a mass of 44.

We set useful threshold defaults for the languages we support but you may want to adjust these settings based on your project guidelines.

The threshold configuration represents the minimum mass a code block must have to be analyzed for duplication. The lower the threshold, the more fine-grained the comparison.

If the engine is too easily reporting duplication, try raising the threshold. If you suspect that the engine isn't catching enough duplication, try lowering the threshold. The best setting tends to differ from language to language.

See codeclimate-duplication's documentation for more information about tuning the mass threshold in your .codeclimate.yml.

Refactorings

Further Reading

Identical blocks of code found in 3 locations. Consider refactoring.
Open

        if (configPanel.isDisplayFocusedRow()) {
            id = selectionPanel.getFocusedID();
        } else if (!selectionPanel.getSelectedIDs().isEmpty()) {
            id = selectionPanel.getSelectedIDs().get(0);
        }
Severity: Minor
Found in de.bund.bfr.knime.pmm.nodes/src/de/bund/bfr/knime/pmm/dataviewandselect/DataViewAndSelectNodeDialog.java and 2 other locations - About 35 mins to fix
de.bund.bfr.knime.pmm.nodes/src/de/bund/bfr/knime/pmm/modelselectiontertiary/ModelSelectionTertiaryNodeDialog.java on lines 195..199
de.bund.bfr.knime.pmm.nodes/src/de/bund/bfr/knime/pmm/primarymodelviewandselect/PrimaryModelViewAndSelectNodeDialog.java on lines 198..202

Duplicated Code

Duplicated code can lead to software that is hard to understand and difficult to change. The Don't Repeat Yourself (DRY) principle states:

Every piece of knowledge must have a single, unambiguous, authoritative representation within a system.

When you violate DRY, bugs and maintenance problems are sure to follow. Duplicated code has a tendency to both continue to replicate and also to diverge (leaving bugs as two similar implementations differ in subtle ways).

Tuning

This issue has a mass of 44.

We set useful threshold defaults for the languages we support but you may want to adjust these settings based on your project guidelines.

The threshold configuration represents the minimum mass a code block must have to be analyzed for duplication. The lower the threshold, the more fine-grained the comparison.

If the engine is too easily reporting duplication, try raising the threshold. If you suspect that the engine isn't catching enough duplication, try lowering the threshold. The best setting tends to differ from language to language.

See codeclimate-duplication's documentation for more information about tuning the mass threshold in your .codeclimate.yml.

Refactorings

Further Reading

Identical blocks of code found in 3 locations. Consider refactoring.
Open

        if (configPanel.isDisplayFocusedRow()) {
            id = selectionPanel.getFocusedID();
        } else if (!selectionPanel.getSelectedIDs().isEmpty()) {
            id = selectionPanel.getSelectedIDs().get(0);
        }
Severity: Minor
Found in de.bund.bfr.knime.pmm.nodes/src/de/bund/bfr/knime/pmm/modelselectiontertiary/ModelSelectionTertiaryNodeDialog.java and 2 other locations - About 35 mins to fix
de.bund.bfr.knime.pmm.nodes/src/de/bund/bfr/knime/pmm/dataviewandselect/DataViewAndSelectNodeDialog.java on lines 182..186
de.bund.bfr.knime.pmm.nodes/src/de/bund/bfr/knime/pmm/primarymodelviewandselect/PrimaryModelViewAndSelectNodeDialog.java on lines 198..202

Duplicated Code

Duplicated code can lead to software that is hard to understand and difficult to change. The Don't Repeat Yourself (DRY) principle states:

Every piece of knowledge must have a single, unambiguous, authoritative representation within a system.

When you violate DRY, bugs and maintenance problems are sure to follow. Duplicated code has a tendency to both continue to replicate and also to diverge (leaving bugs as two similar implementations differ in subtle ways).

Tuning

This issue has a mass of 44.

We set useful threshold defaults for the languages we support but you may want to adjust these settings based on your project guidelines.

The threshold configuration represents the minimum mass a code block must have to be analyzed for duplication. The lower the threshold, the more fine-grained the comparison.

If the engine is too easily reporting duplication, try raising the threshold. If you suspect that the engine isn't catching enough duplication, try lowering the threshold. The best setting tends to differ from language to language.

See codeclimate-duplication's documentation for more information about tuning the mass threshold in your .codeclimate.yml.

Refactorings

Further Reading

Similar blocks of code found in 5 locations. Consider refactoring.
Open

/*******************************************************************************
 * Copyright (c) 2015 Federal Institute for Risk Assessment (BfR), Germany
 *
 * This program is free software: you can redistribute it and/or modify it under the terms of the
 * GNU General Public License as published by the Free Software Foundation, either version 3 of the
Severity: Major
Found in de.bund.bfr.knime.pmm.nodes/src/de/bund/bfr/knime/pmm/pmfxreader/PMFXReaderNodeFactory.java and 4 other locations - About 35 mins to fix
de.bund.bfr.knime.foodprocess/src/de/bund/bfr/knime/foodprocess/addons/AgentsNodeFactory.java on lines 1..77
de.bund.bfr.knime.foodprocess/src/de/bund/bfr/knime/foodprocess/addons/IngredientsNodeFactory.java on lines 1..77
de.bund.bfr.knime.pmm.nodes/src/de/bund/bfr/knime/pmm/pmfreader/PMFReaderNodeFactory.java on lines 1..76
de.bund.bfr.knime.pmm.nodes/src/de/bund/bfr/knime/pmm/pmfreader/PMFXReaderNodeFactory.java on lines 1..68

Duplicated Code

Duplicated code can lead to software that is hard to understand and difficult to change. The Don't Repeat Yourself (DRY) principle states:

Every piece of knowledge must have a single, unambiguous, authoritative representation within a system.

When you violate DRY, bugs and maintenance problems are sure to follow. Duplicated code has a tendency to both continue to replicate and also to diverge (leaving bugs as two similar implementations differ in subtle ways).

Tuning

This issue has a mass of 44.

We set useful threshold defaults for the languages we support but you may want to adjust these settings based on your project guidelines.

The threshold configuration represents the minimum mass a code block must have to be analyzed for duplication. The lower the threshold, the more fine-grained the comparison.

If the engine is too easily reporting duplication, try raising the threshold. If you suspect that the engine isn't catching enough duplication, try lowering the threshold. The best setting tends to differ from language to language.

See codeclimate-duplication's documentation for more information about tuning the mass threshold in your .codeclimate.yml.

Refactorings

Further Reading

Similar blocks of code found in 5 locations. Consider refactoring.
Open

            for (int j = 0; j < addButtons.size(); j++) {
                settingsPanel.add(addButtons.get(j), createConstraints(3, settingsPanelRows + j));
            }
Severity: Major
Found in de.bund.bfr.knime.pmm.nodes/src/de/bund/bfr/knime/pmm/timeseriescreator/TimeSeriesCreatorNodeDialog.java and 4 other locations - About 35 mins to fix
de.bund.bfr.knime.pmm.nodes/src/de/bund/bfr/knime/pmm/timeseriescreator/TimeSeriesCreatorNodeDialog.java on lines 588..590
de.bund.bfr.knime.pmm.nodes/src/de/bund/bfr/knime/pmm/timeseriescreator/TimeSeriesCreatorNodeDialog.java on lines 592..594
de.bund.bfr.knime.pmm.nodes/src/de/bund/bfr/knime/pmm/timeseriescreator/TimeSeriesCreatorNodeDialog.java on lines 596..598
de.bund.bfr.knime.pmm.nodes/src/de/bund/bfr/knime/pmm/timeseriescreator/TimeSeriesCreatorNodeDialog.java on lines 600..602

Duplicated Code

Duplicated code can lead to software that is hard to understand and difficult to change. The Don't Repeat Yourself (DRY) principle states:

Every piece of knowledge must have a single, unambiguous, authoritative representation within a system.

When you violate DRY, bugs and maintenance problems are sure to follow. Duplicated code has a tendency to both continue to replicate and also to diverge (leaving bugs as two similar implementations differ in subtle ways).

Tuning

This issue has a mass of 44.

We set useful threshold defaults for the languages we support but you may want to adjust these settings based on your project guidelines.

The threshold configuration represents the minimum mass a code block must have to be analyzed for duplication. The lower the threshold, the more fine-grained the comparison.

If the engine is too easily reporting duplication, try raising the threshold. If you suspect that the engine isn't catching enough duplication, try lowering the threshold. The best setting tends to differ from language to language.

See codeclimate-duplication's documentation for more information about tuning the mass threshold in your .codeclimate.yml.

Refactorings

Further Reading

Similar blocks of code found in 5 locations. Consider refactoring.
Open

/*******************************************************************************
 * Copyright (c) 2015 Federal Institute for Risk Assessment (BfR), Germany
 *
 * This program is free software: you can redistribute it and/or modify
 * it under the terms of the GNU General Public License as published by
Severity: Major
Found in de.bund.bfr.knime.pmm.nodes/src/de/bund/bfr/knime/pmm/pmfreader/PMFReaderNodeFactory.java and 4 other locations - About 35 mins to fix
de.bund.bfr.knime.foodprocess/src/de/bund/bfr/knime/foodprocess/addons/AgentsNodeFactory.java on lines 1..77
de.bund.bfr.knime.foodprocess/src/de/bund/bfr/knime/foodprocess/addons/IngredientsNodeFactory.java on lines 1..77
de.bund.bfr.knime.pmm.nodes/src/de/bund/bfr/knime/pmm/pmfreader/PMFXReaderNodeFactory.java on lines 1..68
de.bund.bfr.knime.pmm.nodes/src/de/bund/bfr/knime/pmm/pmfxreader/PMFXReaderNodeFactory.java on lines 1..75

Duplicated Code

Duplicated code can lead to software that is hard to understand and difficult to change. The Don't Repeat Yourself (DRY) principle states:

Every piece of knowledge must have a single, unambiguous, authoritative representation within a system.

When you violate DRY, bugs and maintenance problems are sure to follow. Duplicated code has a tendency to both continue to replicate and also to diverge (leaving bugs as two similar implementations differ in subtle ways).

Tuning

This issue has a mass of 44.

We set useful threshold defaults for the languages we support but you may want to adjust these settings based on your project guidelines.

The threshold configuration represents the minimum mass a code block must have to be analyzed for duplication. The lower the threshold, the more fine-grained the comparison.

If the engine is too easily reporting duplication, try raising the threshold. If you suspect that the engine isn't catching enough duplication, try lowering the threshold. The best setting tends to differ from language to language.

See codeclimate-duplication's documentation for more information about tuning the mass threshold in your .codeclimate.yml.

Refactorings

Further Reading

Similar blocks of code found in 5 locations. Consider refactoring.
Open

/*******************************************************************************
 * Copyright (c) 2015 Federal Institute for Risk Assessment (BfR), Germany
 *
 * This program is free software: you can redistribute it and/or modify
 * it under the terms of the GNU General Public License as published by
Severity: Major
Found in de.bund.bfr.knime.pmm.nodes/src/de/bund/bfr/knime/pmm/pmfreader/PMFXReaderNodeFactory.java and 4 other locations - About 35 mins to fix
de.bund.bfr.knime.foodprocess/src/de/bund/bfr/knime/foodprocess/addons/AgentsNodeFactory.java on lines 1..77
de.bund.bfr.knime.foodprocess/src/de/bund/bfr/knime/foodprocess/addons/IngredientsNodeFactory.java on lines 1..77
de.bund.bfr.knime.pmm.nodes/src/de/bund/bfr/knime/pmm/pmfreader/PMFReaderNodeFactory.java on lines 1..76
de.bund.bfr.knime.pmm.nodes/src/de/bund/bfr/knime/pmm/pmfxreader/PMFXReaderNodeFactory.java on lines 1..75

Duplicated Code

Duplicated code can lead to software that is hard to understand and difficult to change. The Don't Repeat Yourself (DRY) principle states:

Every piece of knowledge must have a single, unambiguous, authoritative representation within a system.

When you violate DRY, bugs and maintenance problems are sure to follow. Duplicated code has a tendency to both continue to replicate and also to diverge (leaving bugs as two similar implementations differ in subtle ways).

Tuning

This issue has a mass of 44.

We set useful threshold defaults for the languages we support but you may want to adjust these settings based on your project guidelines.

The threshold configuration represents the minimum mass a code block must have to be analyzed for duplication. The lower the threshold, the more fine-grained the comparison.

If the engine is too easily reporting duplication, try raising the threshold. If you suspect that the engine isn't catching enough duplication, try lowering the threshold. The best setting tends to differ from language to language.

See codeclimate-duplication's documentation for more information about tuning the mass threshold in your .codeclimate.yml.

Refactorings

Further Reading

Similar blocks of code found in 5 locations. Consider refactoring.
Open

/*******************************************************************************
 * Copyright (c) 2015 Federal Institute for Risk Assessment (BfR), Germany
 *
 * This program is free software: you can redistribute it and/or modify
 * it under the terms of the GNU General Public License as published by
Severity: Major
Found in de.bund.bfr.knime.foodprocess/src/de/bund/bfr/knime/foodprocess/addons/IngredientsNodeFactory.java and 4 other locations - About 35 mins to fix
de.bund.bfr.knime.foodprocess/src/de/bund/bfr/knime/foodprocess/addons/AgentsNodeFactory.java on lines 1..77
de.bund.bfr.knime.pmm.nodes/src/de/bund/bfr/knime/pmm/pmfreader/PMFReaderNodeFactory.java on lines 1..76
de.bund.bfr.knime.pmm.nodes/src/de/bund/bfr/knime/pmm/pmfreader/PMFXReaderNodeFactory.java on lines 1..68
de.bund.bfr.knime.pmm.nodes/src/de/bund/bfr/knime/pmm/pmfxreader/PMFXReaderNodeFactory.java on lines 1..75

Duplicated Code

Duplicated code can lead to software that is hard to understand and difficult to change. The Don't Repeat Yourself (DRY) principle states:

Every piece of knowledge must have a single, unambiguous, authoritative representation within a system.

When you violate DRY, bugs and maintenance problems are sure to follow. Duplicated code has a tendency to both continue to replicate and also to diverge (leaving bugs as two similar implementations differ in subtle ways).

Tuning

This issue has a mass of 44.

We set useful threshold defaults for the languages we support but you may want to adjust these settings based on your project guidelines.

The threshold configuration represents the minimum mass a code block must have to be analyzed for duplication. The lower the threshold, the more fine-grained the comparison.

If the engine is too easily reporting duplication, try raising the threshold. If you suspect that the engine isn't catching enough duplication, try lowering the threshold. The best setting tends to differ from language to language.

See codeclimate-duplication's documentation for more information about tuning the mass threshold in your .codeclimate.yml.

Refactorings

Further Reading

Similar blocks of code found in 5 locations. Consider refactoring.
Open

            for (int j = 0; j < condValueFields.size(); j++) {
                settingsPanel.add(condValueFields.get(j), createConstraints(1, settingsPanelRows + j));
            }
Severity: Major
Found in de.bund.bfr.knime.pmm.nodes/src/de/bund/bfr/knime/pmm/timeseriescreator/TimeSeriesCreatorNodeDialog.java and 4 other locations - About 35 mins to fix
de.bund.bfr.knime.pmm.nodes/src/de/bund/bfr/knime/pmm/timeseriescreator/TimeSeriesCreatorNodeDialog.java on lines 584..586
de.bund.bfr.knime.pmm.nodes/src/de/bund/bfr/knime/pmm/timeseriescreator/TimeSeriesCreatorNodeDialog.java on lines 588..590
de.bund.bfr.knime.pmm.nodes/src/de/bund/bfr/knime/pmm/timeseriescreator/TimeSeriesCreatorNodeDialog.java on lines 592..594
de.bund.bfr.knime.pmm.nodes/src/de/bund/bfr/knime/pmm/timeseriescreator/TimeSeriesCreatorNodeDialog.java on lines 600..602

Duplicated Code

Duplicated code can lead to software that is hard to understand and difficult to change. The Don't Repeat Yourself (DRY) principle states:

Every piece of knowledge must have a single, unambiguous, authoritative representation within a system.

When you violate DRY, bugs and maintenance problems are sure to follow. Duplicated code has a tendency to both continue to replicate and also to diverge (leaving bugs as two similar implementations differ in subtle ways).

Tuning

This issue has a mass of 44.

We set useful threshold defaults for the languages we support but you may want to adjust these settings based on your project guidelines.

The threshold configuration represents the minimum mass a code block must have to be analyzed for duplication. The lower the threshold, the more fine-grained the comparison.

If the engine is too easily reporting duplication, try raising the threshold. If you suspect that the engine isn't catching enough duplication, try lowering the threshold. The best setting tends to differ from language to language.

See codeclimate-duplication's documentation for more information about tuning the mass threshold in your .codeclimate.yml.

Refactorings

Further Reading

Similar blocks of code found in 5 locations. Consider refactoring.
Open

            for (int j = 0; j < condButtons.size(); j++) {
                settingsPanel.add(condButtons.get(j), createConstraints(0, settingsPanelRows + j));
            }
Severity: Major
Found in de.bund.bfr.knime.pmm.nodes/src/de/bund/bfr/knime/pmm/timeseriescreator/TimeSeriesCreatorNodeDialog.java and 4 other locations - About 35 mins to fix
de.bund.bfr.knime.pmm.nodes/src/de/bund/bfr/knime/pmm/timeseriescreator/TimeSeriesCreatorNodeDialog.java on lines 584..586
de.bund.bfr.knime.pmm.nodes/src/de/bund/bfr/knime/pmm/timeseriescreator/TimeSeriesCreatorNodeDialog.java on lines 588..590
de.bund.bfr.knime.pmm.nodes/src/de/bund/bfr/knime/pmm/timeseriescreator/TimeSeriesCreatorNodeDialog.java on lines 596..598
de.bund.bfr.knime.pmm.nodes/src/de/bund/bfr/knime/pmm/timeseriescreator/TimeSeriesCreatorNodeDialog.java on lines 600..602

Duplicated Code

Duplicated code can lead to software that is hard to understand and difficult to change. The Don't Repeat Yourself (DRY) principle states:

Every piece of knowledge must have a single, unambiguous, authoritative representation within a system.

When you violate DRY, bugs and maintenance problems are sure to follow. Duplicated code has a tendency to both continue to replicate and also to diverge (leaving bugs as two similar implementations differ in subtle ways).

Tuning

This issue has a mass of 44.

We set useful threshold defaults for the languages we support but you may want to adjust these settings based on your project guidelines.

The threshold configuration represents the minimum mass a code block must have to be analyzed for duplication. The lower the threshold, the more fine-grained the comparison.

If the engine is too easily reporting duplication, try raising the threshold. If you suspect that the engine isn't catching enough duplication, try lowering the threshold. The best setting tends to differ from language to language.

See codeclimate-duplication's documentation for more information about tuning the mass threshold in your .codeclimate.yml.

Refactorings

Further Reading

Similar blocks of code found in 5 locations. Consider refactoring.
Open

/*******************************************************************************
 * Copyright (c) 2015 Federal Institute for Risk Assessment (BfR), Germany
 *
 * This program is free software: you can redistribute it and/or modify
 * it under the terms of the GNU General Public License as published by
Severity: Major
Found in de.bund.bfr.knime.foodprocess/src/de/bund/bfr/knime/foodprocess/addons/AgentsNodeFactory.java and 4 other locations - About 35 mins to fix
de.bund.bfr.knime.foodprocess/src/de/bund/bfr/knime/foodprocess/addons/IngredientsNodeFactory.java on lines 1..77
de.bund.bfr.knime.pmm.nodes/src/de/bund/bfr/knime/pmm/pmfreader/PMFReaderNodeFactory.java on lines 1..76
de.bund.bfr.knime.pmm.nodes/src/de/bund/bfr/knime/pmm/pmfreader/PMFXReaderNodeFactory.java on lines 1..68
de.bund.bfr.knime.pmm.nodes/src/de/bund/bfr/knime/pmm/pmfxreader/PMFXReaderNodeFactory.java on lines 1..75

Duplicated Code

Duplicated code can lead to software that is hard to understand and difficult to change. The Don't Repeat Yourself (DRY) principle states:

Every piece of knowledge must have a single, unambiguous, authoritative representation within a system.

When you violate DRY, bugs and maintenance problems are sure to follow. Duplicated code has a tendency to both continue to replicate and also to diverge (leaving bugs as two similar implementations differ in subtle ways).

Tuning

This issue has a mass of 44.

We set useful threshold defaults for the languages we support but you may want to adjust these settings based on your project guidelines.

The threshold configuration represents the minimum mass a code block must have to be analyzed for duplication. The lower the threshold, the more fine-grained the comparison.

If the engine is too easily reporting duplication, try raising the threshold. If you suspect that the engine isn't catching enough duplication, try lowering the threshold. The best setting tends to differ from language to language.

See codeclimate-duplication's documentation for more information about tuning the mass threshold in your .codeclimate.yml.

Refactorings

Further Reading

Similar blocks of code found in 5 locations. Consider refactoring.
Open

            for (int j = 0; j < removeButtons.size(); j++) {
                settingsPanel.add(removeButtons.get(j), createConstraints(4, settingsPanelRows + j));
            }
Severity: Major
Found in de.bund.bfr.knime.pmm.nodes/src/de/bund/bfr/knime/pmm/timeseriescreator/TimeSeriesCreatorNodeDialog.java and 4 other locations - About 35 mins to fix
de.bund.bfr.knime.pmm.nodes/src/de/bund/bfr/knime/pmm/timeseriescreator/TimeSeriesCreatorNodeDialog.java on lines 584..586
de.bund.bfr.knime.pmm.nodes/src/de/bund/bfr/knime/pmm/timeseriescreator/TimeSeriesCreatorNodeDialog.java on lines 592..594
de.bund.bfr.knime.pmm.nodes/src/de/bund/bfr/knime/pmm/timeseriescreator/TimeSeriesCreatorNodeDialog.java on lines 596..598
de.bund.bfr.knime.pmm.nodes/src/de/bund/bfr/knime/pmm/timeseriescreator/TimeSeriesCreatorNodeDialog.java on lines 600..602

Duplicated Code

Duplicated code can lead to software that is hard to understand and difficult to change. The Don't Repeat Yourself (DRY) principle states:

Every piece of knowledge must have a single, unambiguous, authoritative representation within a system.

When you violate DRY, bugs and maintenance problems are sure to follow. Duplicated code has a tendency to both continue to replicate and also to diverge (leaving bugs as two similar implementations differ in subtle ways).

Tuning

This issue has a mass of 44.

We set useful threshold defaults for the languages we support but you may want to adjust these settings based on your project guidelines.

The threshold configuration represents the minimum mass a code block must have to be analyzed for duplication. The lower the threshold, the more fine-grained the comparison.

If the engine is too easily reporting duplication, try raising the threshold. If you suspect that the engine isn't catching enough duplication, try lowering the threshold. The best setting tends to differ from language to language.

See codeclimate-duplication's documentation for more information about tuning the mass threshold in your .codeclimate.yml.

Refactorings

Further Reading

Similar blocks of code found in 5 locations. Consider refactoring.
Open

            for (int j = 0; j < condUnitFields.size(); j++) {
                settingsPanel.add(condUnitFields.get(j), createConstraints(2, settingsPanelRows + j));
            }
Severity: Major
Found in de.bund.bfr.knime.pmm.nodes/src/de/bund/bfr/knime/pmm/timeseriescreator/TimeSeriesCreatorNodeDialog.java and 4 other locations - About 35 mins to fix
de.bund.bfr.knime.pmm.nodes/src/de/bund/bfr/knime/pmm/timeseriescreator/TimeSeriesCreatorNodeDialog.java on lines 584..586
de.bund.bfr.knime.pmm.nodes/src/de/bund/bfr/knime/pmm/timeseriescreator/TimeSeriesCreatorNodeDialog.java on lines 588..590
de.bund.bfr.knime.pmm.nodes/src/de/bund/bfr/knime/pmm/timeseriescreator/TimeSeriesCreatorNodeDialog.java on lines 592..594
de.bund.bfr.knime.pmm.nodes/src/de/bund/bfr/knime/pmm/timeseriescreator/TimeSeriesCreatorNodeDialog.java on lines 596..598

Duplicated Code

Duplicated code can lead to software that is hard to understand and difficult to change. The Don't Repeat Yourself (DRY) principle states:

Every piece of knowledge must have a single, unambiguous, authoritative representation within a system.

When you violate DRY, bugs and maintenance problems are sure to follow. Duplicated code has a tendency to both continue to replicate and also to diverge (leaving bugs as two similar implementations differ in subtle ways).

Tuning

This issue has a mass of 44.

We set useful threshold defaults for the languages we support but you may want to adjust these settings based on your project guidelines.

The threshold configuration represents the minimum mass a code block must have to be analyzed for duplication. The lower the threshold, the more fine-grained the comparison.

If the engine is too easily reporting duplication, try raising the threshold. If you suspect that the engine isn't catching enough duplication, try lowering the threshold. The best setting tends to differ from language to language.

See codeclimate-duplication's documentation for more information about tuning the mass threshold in your .codeclimate.yml.

Refactorings

Further Reading

Identical blocks of code found in 2 locations. Consider refactoring.
Open

    if (NodeContext.getContext().getNodeContainer().getFlowObjectStack() != null) {
      flowVariables = NodeContext.getContext().getNodeContainer().getFlowObjectStack()
          .getAvailableFlowVariables();
    } else {
      flowVariables = Collections.emptyMap();
Severity: Minor
Found in de.bund.bfr.knime.fsklab.deprecatednodes/src-1_9_0/de/bund/bfr/knime/fsklab/v1_9/joiner/JoinerNodeModel.java and 1 other location - About 35 mins to fix
de.bund.bfr.knime.fsklab.nodes/src/de/bund/bfr/knime/fsklab/v2_0/joiner/JoinerNodeModel.java on lines 351..356

Duplicated Code

Duplicated code can lead to software that is hard to understand and difficult to change. The Don't Repeat Yourself (DRY) principle states:

Every piece of knowledge must have a single, unambiguous, authoritative representation within a system.

When you violate DRY, bugs and maintenance problems are sure to follow. Duplicated code has a tendency to both continue to replicate and also to diverge (leaving bugs as two similar implementations differ in subtle ways).

Tuning

This issue has a mass of 44.

We set useful threshold defaults for the languages we support but you may want to adjust these settings based on your project guidelines.

The threshold configuration represents the minimum mass a code block must have to be analyzed for duplication. The lower the threshold, the more fine-grained the comparison.

If the engine is too easily reporting duplication, try raising the threshold. If you suspect that the engine isn't catching enough duplication, try lowering the threshold. The best setting tends to differ from language to language.

See codeclimate-duplication's documentation for more information about tuning the mass threshold in your .codeclimate.yml.

Refactorings

Further Reading

Identical blocks of code found in 2 locations. Consider refactoring.
Open

        @Override
        public Component getListCellRendererComponent(JList<?> list,
                Object value, int index, boolean isSelected,
                boolean cellHasFocus) {
            color = (Color) value;
Severity: Minor
Found in de.bund.bfr.knime.pmm.common/src/de/bund/bfr/knime/pmm/common/ui/QualityComboBox.java and 1 other location - About 35 mins to fix
de.bund.bfr.knime.pmm.nodes/src/de/bund/bfr/knime/pmm/manualmodelconf/ui/MMC_M.java on lines 1166..1175

Duplicated Code

Duplicated code can lead to software that is hard to understand and difficult to change. The Don't Repeat Yourself (DRY) principle states:

Every piece of knowledge must have a single, unambiguous, authoritative representation within a system.

When you violate DRY, bugs and maintenance problems are sure to follow. Duplicated code has a tendency to both continue to replicate and also to diverge (leaving bugs as two similar implementations differ in subtle ways).

Tuning

This issue has a mass of 44.

We set useful threshold defaults for the languages we support but you may want to adjust these settings based on your project guidelines.

The threshold configuration represents the minimum mass a code block must have to be analyzed for duplication. The lower the threshold, the more fine-grained the comparison.

If the engine is too easily reporting duplication, try raising the threshold. If you suspect that the engine isn't catching enough duplication, try lowering the threshold. The best setting tends to differ from language to language.

See codeclimate-duplication's documentation for more information about tuning the mass threshold in your .codeclimate.yml.

Refactorings

Further Reading

Severity
Category
Status
Source
Language