ChangeLog.md
Change Log
==========
`bosh-bootstrap` is a command line tool that you can run on your laptop and automatically get a Micro BOSH deployed on AWS, OpenStack, or vSphere.
```
gem install bosh-bootstrap
bosh-bootstrap deploy
```
v0.18.1
-------
- [all] unping fog version
v0.18
-----
- [aws-openstack] added support for custom ntp servers
- [all] configure ntp for microbosh VM as well as for VM's spawned by the director
v0.17.1
-------
- use light stemcells by default in aws
v0.17
-----
- [aws-openstack] Added proxy support
- Bump vm size to m3
- [aws] use light stemcell
v0.16
-----
- [aws] Enable the resurrector by default
- Bump the size of the permanent disk on the microbosh from 16GB to 32GB
- Fix deprecated calls to :should in tests
- Remove instructions regarding explicit install of fog, as it is no longer necessary
- Require cyoi 0.11.3 for a bug fix regarding microbosh security groups [v0.16.1]
- Allow openstack state timeout to be configurable
v0.15
-----
- No more separate Gemfile and ugly `bundle install` step; thanks to BOSH CLI upgrading its dependencies sufficiently so as not to clash with bosh-bootstrap
- This allows inclusion in the [traveling-bosh](https://github.com/cloudfoundry-community/traveling-bosh) project
v0.14
-----
- default target directory is current director, rather than `~/.microbosh`
- fixed to use new stemcells
- [aws] VPC support - detects if VPCs available and allows selection, then select of subset, then creates security groups into the VPC
- [aws vpc] network type: manual for vpc
- [aws] reuse existing bosh stemcell AMIs - automatically detects if a stemcell has been uploaded/converted into an AMI [v0.14.2]
- [openstack] reuse existing bosh stemcell images - automatically detects if a stemcell has been uploaded/converted into an OpenStack image [v0.14.3]
- [aws vpc] security groups are uniquely named per VPC [v0.14.4]
- [aws vpc] added dns recursor to vpc [v0.14.5]
- added ability to set dns recursor [v0.14.5]
v0.13
-----
- [openstack] Neutron support - detects that Neutron is available and prompts for which subnet to use
- [openstack] Boot from volume - prompt for which images should be used (QCOW2 vs RAW) and configure MicroBOSH to use boot_from_volume if RAW format required
- only create 3 security groups instead of many (fix for new AWS accounts and OpenStack tenants with small quotas)
- testing for ruby 2.1.0; though BOSH still requires 1.9.3 at time of writing
- upgrade rspec for 3.0 and using expect/to syntax
- ignore SSL verification [v0.13.1] - to be made optional in future
- loosen requirement on cyoi to major version [v0.13.2]
v0.12
-----
- vSphere support [thanks Matt Stine!!]
v0.11
-----
- Complete rewrite of bosh-bootstrap in orphan branch
- CodeClimate score changed from 0.82 to 3.85
- Initial support for AWS EC2; WIP for OpenStack; initial unit tests for vSphere
- Interactive Q&A is extracted into [cyoi](https://github.com/drnic/cyoi) (choose-your-own-infrastructure) library
- Accessing settings is much cleaner; functionality moved into fork of settingslogic called [readwritesettings](https://github.com/drnic/readwritesettings)
- Inception VM/server is now provisioned via separate CLI project [inception-server](https://github.com/drnic/inception-server)
- AWS/us-east-1 uses public AMIs; other regions & other CPIs use stemcells
- CLI via bosh plugin (`bosh bootstrap`) rather than a stand alone CLI (`bosh-bootstrap`\)
- Added `ssh` action to ssh into the microbosh
- Added `delete` actions to delete the microbosh (but not the IP address and security groups)
- Add back `bosh-bootstrap` CLI & remove bosh_cli dependency (v0.11.1)
- Specify which AWS AZ to use via `provider.az` in settings.yml (v0.11.2)
- Support for OpenStack (also in cyoi 0.4.3) thanks to Ferdy! (v0.11.3)
- Ensure CLI loads bundler (v0.11.4)
- rubygem users should be able to install & run from rubygems instead of source workaround (v0.11.5)
- microbosh volume is smaller 4G and automatically fits on devstack/openstack (v0.11.5; thx @ryfow)
- Security group `bosh_agent_http` renamed to `bosh_agent_https`, with same 6868 port for talking to bosh_agent running in https mode (`bosh_agent_http` can then be deleted) (v0.11.5)
- Add port 53/dns security group (v0.11.6)
- Port 53 open on UDP only as workaround for multi-region AWS (v0.11.7; thx @yudai)
- Suppress bundler git "fatal" warnings (by converting ~/.microbosh into git repo) (v0.11.8)
- Update to newer-er-er stemcell paths from Pivotal's s3 bucket (v0.11.9, v0.11.10)
- Enlarge persistent disk from 4G to 16G (v0.11.11)
- bosh_cli gems now on rubygems instead of pivotal s3 bucket (v0.11.12)
- OpenStack improvements to reduce POST API throttling (v0.11.13)
- Can now update a running microbosh (thanks @lookitup4me) (v0.11.14)
- OpenStack uses commonly available m1.medium flavor instead of bespoke m1.microbosh (v0.11.14)
- Properly enlarge persistent disk from 4G to 16G (v0.11.15)
v0.10
-----
Available on branch [v0.10](https://github.com/StarkAndWayne/bosh-bootstrap/tree/v0.10).
Install using:
```
gem install bosh-bootstrap -v "~> 0.10.0"
```
- Only using latest pre-release bosh gems & stemcells/amis - do not upgrade if you want the old 2012 gems
- AWS us-east-1 uses a pre-built AMI for extra speed
- AWS all regions are working (using pre-created stemcell)
- OpenStack is now working (using pre-created stemcell)
- `deploy --create-inception` chooses to create an inception VM
- Using `bosh_cli_plugin_micro` (for `bosh micro`) [was `bosh_deployer`](v1.10.1)
- `bosh-cloudfoundry` gem installed with prerelease gems (fix in v0.10.1)
- AWS inception VM gets its attached volume again (v1.10.2)
v0.9
----
- v0.8 wasn't working for many people; and neither will v0.9; but its a move in the right direction.
- Moving towards new 1.5.0 version of bosh that hasn't come out yet formally.
- AWS us-east-1 will use a pre-created AMI. It saves about 10-15 minutes!
- AWS other regions will use a pre-created stemcell. I haven't tested this well yet.
- OpenStack support is still broken because you need to create your own stemcells and for that you need a 12.10 inception VM and that work isn't quite done yet.
v0.8
----
- SSH keys used to access inception VM are now generated and stored within the `~/.bosh_bootstrap/ssh` folder. This fixes many issues that many people were having (their keys had passphrases, their fog_default keypair was old). It also allows a manifest file to be shared between people as it contains the private key contents, and the private key file will be recreated if it is missing.
- existing inception VMs' manifest.yml will be upgraded automatically and a backup file created (just in case)
- tightening of net-ssh & net-scp gems to ensure the bosh-bootstrap gem can be installed [thx @mmb]
- preinstall net-ssh/net-scp/fog on inception VM before installing `bosh_deployer` to fix in ability to install `bosh_deployer` 1.4.1 due to latest fog 1.10.0 release (v0.8.2)
v0.7
----
Notable:
- For existing users: please run "deploy --upgrade-deps" as new inception package (runit) added; and jazor/yaml_command CLIs installed
- Forces use of microbosh stemcell 0.8.1 which work with public gems (latest public stemcell does not work with public gems)
Added:
- `mosh` command - connect to Inception VM on trains over flaky internet connections (use instead of `ssh` or `tmux` command) [thx @mrdavidlang]
- `upgrade-inception` command - to perform an upgrade of the Inception VM without triggering a re-deploy of microbosh.
Changes:
- Inception VM now installs rubygems 2.0.0 & bundler 1.3.0
- Better idempotence for re-deploying microbosh - will delete&deploy after a failure; will deploy after a deletion.
- Downloads ubuntu 10.04 ISO to speed up custom stemcell builds
- Using redcard to ensure ruby 1.9 only
- `manifest.yml` stores the name of the stemcell created from a custom stemcell build; no longer re-creates stemcell each time
- git color is enabled on inception VM
Work in progress:
- AWS VPC support was begin by the core bosh team; though work has stopped sadly.
- Growing number of specs mostly using Fog.mock! mode; tests being run on travis
### v0.7.1
- Make "deploy --private-key" option work [thx @dpw]
- Add hypervisor for OpenStack stemcells [thx @frodenas]
- Don't fail if `settings.fog_credentials.openstack_region` doesn't exist
- Fix README for changed location of bosh-release [thx @scottfrederick]
- No need to show --latest-stemcell in README tutorial
v0.6
----
Highlights:
- Defaults to downloading latest stemcell (rather than stable, which are getting old now).
- Installs the Cloud Foundry plugin for bosh https://github.com/StarkAndWayne/bosh-cloudfoundry
Additions:
- `tmux` - if you have tmux installed, then you can SSH into inception VM with it (thx @mrdavidlang)
- started a test suite; its small but growing! (thx @mrdavidlang for getting it started)
Bug fixes:
- Fog::SSH uses explicit ssh key that was requested to access inception VM
Future thoughts:
- I hate Settingslogic for read-write settings. It's really only a read-only settings DSL. It puts Ruby classes into the YAML. Probably going to rip it out.
- I am so sorry I took so long to start writing tests. It always seemed such a hard thing to write tests for. But bosh-cloudfoundry project has had good success with internal tests; so we're migrating those ideas into this project.