Sign upLogin

Syncleus/apex

View on GitHub
Star

Showing 62 of 62 total issues

Similar blocks of code found in 3 locations. Consider refactoring.
Open

Severity: Major
Found in src/apex/plugins/id/__init__.py and 2 other locations - About 4 days to fix
src/apex/plugins/beacon/__init__.py on lines 0..76
src/apex/plugins/status/__init__.py on lines 0..79

Duplicated Code

Duplicated code can lead to software that is hard to understand and difficult to change. The Don't Repeat Yourself (DRY) principle states:

Every piece of knowledge must have a single, unambiguous, authoritative representation within a system.

When you violate DRY, bugs and maintenance problems are sure to follow. Duplicated code has a tendency to both continue to replicate and also to diverge (leaving bugs as two similar implementations differ in subtle ways).

Tuning

This issue has a mass of 490.

We set useful threshold defaults for the languages we support but you may want to adjust these settings based on your project guidelines.

The threshold configuration represents the minimum mass a code block must have to be analyzed for duplication. The lower the threshold, the more fine-grained the comparison.

If the engine is too easily reporting duplication, try raising the threshold. If you suspect that the engine isn't catching enough duplication, try lowering the threshold. The best setting tends to differ from language to language.

See codeclimate-duplication's documentation for more information about tuning the mass threshold in your .codeclimate.yml.

Refactorings

Further Reading

Similar blocks of code found in 3 locations. Consider refactoring.
Open

Severity: Major
Found in src/apex/plugins/status/__init__.py and 2 other locations - About 4 days to fix
src/apex/plugins/beacon/__init__.py on lines 0..76
src/apex/plugins/id/__init__.py on lines 0..76

Duplicated Code

Duplicated code can lead to software that is hard to understand and difficult to change. The Don't Repeat Yourself (DRY) principle states:

Every piece of knowledge must have a single, unambiguous, authoritative representation within a system.

When you violate DRY, bugs and maintenance problems are sure to follow. Duplicated code has a tendency to both continue to replicate and also to diverge (leaving bugs as two similar implementations differ in subtle ways).

Tuning

This issue has a mass of 490.

We set useful threshold defaults for the languages we support but you may want to adjust these settings based on your project guidelines.

The threshold configuration represents the minimum mass a code block must have to be analyzed for duplication. The lower the threshold, the more fine-grained the comparison.

If the engine is too easily reporting duplication, try raising the threshold. If you suspect that the engine isn't catching enough duplication, try lowering the threshold. The best setting tends to differ from language to language.

See codeclimate-duplication's documentation for more information about tuning the mass threshold in your .codeclimate.yml.

Refactorings

Further Reading

Similar blocks of code found in 3 locations. Consider refactoring.
Open

Severity: Major
Found in src/apex/plugins/beacon/__init__.py and 2 other locations - About 4 days to fix
src/apex/plugins/id/__init__.py on lines 0..76
src/apex/plugins/status/__init__.py on lines 0..79

Duplicated Code

Duplicated code can lead to software that is hard to understand and difficult to change. The Don't Repeat Yourself (DRY) principle states:

Every piece of knowledge must have a single, unambiguous, authoritative representation within a system.

When you violate DRY, bugs and maintenance problems are sure to follow. Duplicated code has a tendency to both continue to replicate and also to diverge (leaving bugs as two similar implementations differ in subtle ways).

Tuning

This issue has a mass of 490.

We set useful threshold defaults for the languages we support but you may want to adjust these settings based on your project guidelines.

The threshold configuration represents the minimum mass a code block must have to be analyzed for duplication. The lower the threshold, the more fine-grained the comparison.

If the engine is too easily reporting duplication, try raising the threshold. If you suspect that the engine isn't catching enough duplication, try lowering the threshold. The best setting tends to differ from language to language.

See codeclimate-duplication's documentation for more information about tuning the mass threshold in your .codeclimate.yml.

Refactorings

Further Reading

Identical blocks of code found in 2 locations. Consider refactoring.
Open

                if band_path_net and node == port['net']:
                    # only when a ssid is present should it be treated preemptively if it is a band path
                    if not selected_hop:
                        selected_hop['index'] = hop_index
                        selected_hop['hop'] = hop
Severity: Major
Found in src/apex/plugins/apexparadigm/__init__.py and 1 other location - About 1 day to fix
src/apex/plugins/apexparadigm/__init__.py on lines 178..197

Duplicated Code

Duplicated code can lead to software that is hard to understand and difficult to change. The Don't Repeat Yourself (DRY) principle states:

Every piece of knowledge must have a single, unambiguous, authoritative representation within a system.

When you violate DRY, bugs and maintenance problems are sure to follow. Duplicated code has a tendency to both continue to replicate and also to diverge (leaving bugs as two similar implementations differ in subtle ways).

Tuning

This issue has a mass of 201.

We set useful threshold defaults for the languages we support but you may want to adjust these settings based on your project guidelines.

The threshold configuration represents the minimum mass a code block must have to be analyzed for duplication. The lower the threshold, the more fine-grained the comparison.

If the engine is too easily reporting duplication, try raising the threshold. If you suspect that the engine isn't catching enough duplication, try lowering the threshold. The best setting tends to differ from language to language.

See codeclimate-duplication's documentation for more information about tuning the mass threshold in your .codeclimate.yml.

Refactorings

Further Reading

Identical blocks of code found in 2 locations. Consider refactoring.
Open

                elif not band_path_net and port['net'].startswith(band_path):
                    # only when a ssid is present should it be treated preemptively if it is a band path
                    if not selected_hop:
                        selected_hop['index'] = hop_index
                        selected_hop['hop'] = hop
Severity: Major
Found in src/apex/plugins/apexparadigm/__init__.py and 1 other location - About 1 day to fix
src/apex/plugins/apexparadigm/__init__.py on lines 158..177

Duplicated Code

Duplicated code can lead to software that is hard to understand and difficult to change. The Don't Repeat Yourself (DRY) principle states:

Every piece of knowledge must have a single, unambiguous, authoritative representation within a system.

When you violate DRY, bugs and maintenance problems are sure to follow. Duplicated code has a tendency to both continue to replicate and also to diverge (leaving bugs as two similar implementations differ in subtle ways).

Tuning

This issue has a mass of 201.

We set useful threshold defaults for the languages we support but you may want to adjust these settings based on your project guidelines.

The threshold configuration represents the minimum mass a code block must have to be analyzed for duplication. The lower the threshold, the more fine-grained the comparison.

If the engine is too easily reporting duplication, try raising the threshold. If you suspect that the engine isn't catching enough duplication, try lowering the threshold. The best setting tends to differ from language to language.

See codeclimate-duplication's documentation for more information about tuning the mass threshold in your .codeclimate.yml.

Refactorings

Further Reading

Function __passive_digipeat has a Cognitive Complexity of 59 (exceeds 5 allowed). Consider refactoring.
Open

    def __passive_digipeat(self, frame, recv_port, recv_port_name):
        # can't digipeat packets if we are in the expended path
        if apex.routing.has_seen(self.port_map, frame):
            return
Severity: Minor
Found in src/apex/plugins/apexparadigm/__init__.py - About 1 day to fix

Cognitive Complexity

Cognitive Complexity is a measure of how difficult a unit of code is to intuitively understand. Unlike Cyclomatic Complexity, which determines how difficult your code will be to test, Cognitive Complexity tells you how difficult your code will be to read and comprehend.

A method's cognitive complexity is based on a few simple rules:

  • Code is not considered more complex when it uses shorthand that the language provides for collapsing multiple statements into one
  • Code is considered more complex for each "break in the linear flow of the code"
  • Code is considered more complex when "flow breaking structures are nested"

Further reading

Function __preemptive_digipeat has a Cognitive Complexity of 54 (exceeds 5 allowed). Consider refactoring.
Open

    def __preemptive_digipeat(self, frame, recv_port, recv_port_name):
        # can't digipeat packets if we are in the expended path
        if apex.routing.has_seen(self.port_map, frame):
            return
Severity: Minor
Found in src/apex/plugins/apexparadigm/__init__.py - About 1 day to fix

Cognitive Complexity

Cognitive Complexity is a measure of how difficult a unit of code is to intuitively understand. Unlike Cyclomatic Complexity, which determines how difficult your code will be to test, Cognitive Complexity tells you how difficult your code will be to read and comprehend.

A method's cognitive complexity is based on a few simple rules:

  • Code is not considered more complex when it uses shorthand that the language provides for collapsing multiple statements into one
  • Code is considered more complex for each "break in the linear flow of the code"
  • Code is considered more complex when "flow breaking structures are nested"

Further reading

Similar blocks of code found in 4 locations. Consider refactoring.
Open

                    elif node == 'GATE' and port['net'].startswith('2M'):
                        frame['path'] = frame['path'][:hop_index] + [recv_port['identifier'] + '*'] + [node + '*'] +\
                                        frame['path'][hop_index+1:]
                        port['tnc'].write(frame, port['tnc_port'])
                        self.aprsis.write(frame)
Severity: Major
Found in src/apex/plugins/apexparadigm/__init__.py and 3 other locations - About 7 hrs to fix
src/apex/plugins/apexparadigm/__init__.py on lines 80..85
src/apex/plugins/apexparadigm/__init__.py on lines 87..92
src/apex/plugins/apexparadigm/__init__.py on lines 113..117

Duplicated Code

Duplicated code can lead to software that is hard to understand and difficult to change. The Don't Repeat Yourself (DRY) principle states:

Every piece of knowledge must have a single, unambiguous, authoritative representation within a system.

When you violate DRY, bugs and maintenance problems are sure to follow. Duplicated code has a tendency to both continue to replicate and also to diverge (leaving bugs as two similar implementations differ in subtle ways).

Tuning

This issue has a mass of 116.

We set useful threshold defaults for the languages we support but you may want to adjust these settings based on your project guidelines.

The threshold configuration represents the minimum mass a code block must have to be analyzed for duplication. The lower the threshold, the more fine-grained the comparison.

If the engine is too easily reporting duplication, try raising the threshold. If you suspect that the engine isn't catching enough duplication, try lowering the threshold. The best setting tends to differ from language to language.

See codeclimate-duplication's documentation for more information about tuning the mass threshold in your .codeclimate.yml.

Refactorings

Further Reading

Similar blocks of code found in 4 locations. Consider refactoring.
Open

                            if node == port['net']:
                                frame['path'] = frame['path'][:hop_index] + [recv_port['identifier'] + '*'] +\
                                                [hop + '*'] + frame['path'][hop_index+1:]
                                port['tnc'].write(frame, port['tnc_port'])
                                self.aprsis.write(frame)
Severity: Major
Found in src/apex/plugins/apexparadigm/__init__.py and 3 other locations - About 7 hrs to fix
src/apex/plugins/apexparadigm/__init__.py on lines 87..92
src/apex/plugins/apexparadigm/__init__.py on lines 101..106
src/apex/plugins/apexparadigm/__init__.py on lines 113..117

Duplicated Code

Duplicated code can lead to software that is hard to understand and difficult to change. The Don't Repeat Yourself (DRY) principle states:

Every piece of knowledge must have a single, unambiguous, authoritative representation within a system.

When you violate DRY, bugs and maintenance problems are sure to follow. Duplicated code has a tendency to both continue to replicate and also to diverge (leaving bugs as two similar implementations differ in subtle ways).

Tuning

This issue has a mass of 116.

We set useful threshold defaults for the languages we support but you may want to adjust these settings based on your project guidelines.

The threshold configuration represents the minimum mass a code block must have to be analyzed for duplication. The lower the threshold, the more fine-grained the comparison.

If the engine is too easily reporting duplication, try raising the threshold. If you suspect that the engine isn't catching enough duplication, try lowering the threshold. The best setting tends to differ from language to language.

See codeclimate-duplication's documentation for more information about tuning the mass threshold in your .codeclimate.yml.

Refactorings

Further Reading

Similar blocks of code found in 4 locations. Consider refactoring.
Open

                elif node.startswith('WIDE') and ssid is 1:
                    frame['path'] = frame['path'][:hop_index] + [recv_port['identifier'] + '*'] + [node + '*'] + frame['path'][hop_index+1:]
                    port['tnc'].write(frame, port['tnc_port'])
                    self.aprsis.write(frame)
                    return
Severity: Major
Found in src/apex/plugins/apexparadigm/__init__.py and 3 other locations - About 7 hrs to fix
src/apex/plugins/apexparadigm/__init__.py on lines 80..85
src/apex/plugins/apexparadigm/__init__.py on lines 87..92
src/apex/plugins/apexparadigm/__init__.py on lines 101..106

Duplicated Code

Duplicated code can lead to software that is hard to understand and difficult to change. The Don't Repeat Yourself (DRY) principle states:

Every piece of knowledge must have a single, unambiguous, authoritative representation within a system.

When you violate DRY, bugs and maintenance problems are sure to follow. Duplicated code has a tendency to both continue to replicate and also to diverge (leaving bugs as two similar implementations differ in subtle ways).

Tuning

This issue has a mass of 116.

We set useful threshold defaults for the languages we support but you may want to adjust these settings based on your project guidelines.

The threshold configuration represents the minimum mass a code block must have to be analyzed for duplication. The lower the threshold, the more fine-grained the comparison.

If the engine is too easily reporting duplication, try raising the threshold. If you suspect that the engine isn't catching enough duplication, try lowering the threshold. The best setting tends to differ from language to language.

See codeclimate-duplication's documentation for more information about tuning the mass threshold in your .codeclimate.yml.

Refactorings

Further Reading

Similar blocks of code found in 4 locations. Consider refactoring.
Open

                            if port['net'].startswith(node):
                                frame['path'] = frame['path'][:hop_index] + [recv_port['identifier'] + '*'] +\
                                                [hop + '*'] + frame['path'][hop_index+1:]
                                port['tnc'].write(frame, port['tnc_port'])
                                self.aprsis.write(frame)
Severity: Major
Found in src/apex/plugins/apexparadigm/__init__.py and 3 other locations - About 7 hrs to fix
src/apex/plugins/apexparadigm/__init__.py on lines 80..85
src/apex/plugins/apexparadigm/__init__.py on lines 101..106
src/apex/plugins/apexparadigm/__init__.py on lines 113..117

Duplicated Code

Duplicated code can lead to software that is hard to understand and difficult to change. The Don't Repeat Yourself (DRY) principle states:

Every piece of knowledge must have a single, unambiguous, authoritative representation within a system.

When you violate DRY, bugs and maintenance problems are sure to follow. Duplicated code has a tendency to both continue to replicate and also to diverge (leaving bugs as two similar implementations differ in subtle ways).

Tuning

This issue has a mass of 116.

We set useful threshold defaults for the languages we support but you may want to adjust these settings based on your project guidelines.

The threshold configuration represents the minimum mass a code block must have to be analyzed for duplication. The lower the threshold, the more fine-grained the comparison.

If the engine is too easily reporting duplication, try raising the threshold. If you suspect that the engine isn't catching enough duplication, try lowering the threshold. The best setting tends to differ from language to language.

See codeclimate-duplication's documentation for more information about tuning the mass threshold in your .codeclimate.yml.

Refactorings

Further Reading

Function __run has a Cognitive Complexity of 47 (exceeds 5 allowed). Consider refactoring.
Open

    def __run(self):
        while self.running:
            if not self.connected:
                if not self.last_connect_attempt or time.time() - self.last_connect_attempt > self.reconnect_wait_time:
                    try:
Severity: Minor
Found in src/apex/buffers.py - About 7 hrs to fix

Cognitive Complexity

Cognitive Complexity is a measure of how difficult a unit of code is to intuitively understand. Unlike Cyclomatic Complexity, which determines how difficult your code will be to test, Cognitive Complexity tells you how difficult your code will be to read and comprehend.

A method's cognitive complexity is based on a few simple rules:

  • Code is not considered more complex when it uses shorthand that the language provides for collapsing multiple statements into one
  • Code is considered more complex for each "break in the linear flow of the code"
  • Code is considered more complex when "flow breaking structures are nested"

Further reading

Similar blocks of code found in 2 locations. Consider refactoring.
Open

def dec2dm_lat(dec):
    """Converts DecDeg to APRS Coord format.
    See: http://ember2ash.com/lat.htm

    Source: http://stackoverflow.com/questions/2056750
Severity: Major
Found in src/apex/aprs/util.py and 1 other location - About 6 hrs to fix
src/apex/aprs/util.py on lines 50..70

Duplicated Code

Duplicated code can lead to software that is hard to understand and difficult to change. The Don't Repeat Yourself (DRY) principle states:

Every piece of knowledge must have a single, unambiguous, authoritative representation within a system.

When you violate DRY, bugs and maintenance problems are sure to follow. Duplicated code has a tendency to both continue to replicate and also to diverge (leaving bugs as two similar implementations differ in subtle ways).

Tuning

This issue has a mass of 98.

We set useful threshold defaults for the languages we support but you may want to adjust these settings based on your project guidelines.

The threshold configuration represents the minimum mass a code block must have to be analyzed for duplication. The lower the threshold, the more fine-grained the comparison.

If the engine is too easily reporting duplication, try raising the threshold. If you suspect that the engine isn't catching enough duplication, try lowering the threshold. The best setting tends to differ from language to language.

See codeclimate-duplication's documentation for more information about tuning the mass threshold in your .codeclimate.yml.

Refactorings

Further Reading

Similar blocks of code found in 2 locations. Consider refactoring.
Open

def dec2dm_lng(dec):
    """Converts DecDeg to APRS Coord format.
    See: http://ember2ash.com/lat.htm

    Example:
Severity: Major
Found in src/apex/aprs/util.py and 1 other location - About 6 hrs to fix
src/apex/aprs/util.py on lines 25..47

Duplicated Code

Duplicated code can lead to software that is hard to understand and difficult to change. The Don't Repeat Yourself (DRY) principle states:

Every piece of knowledge must have a single, unambiguous, authoritative representation within a system.

When you violate DRY, bugs and maintenance problems are sure to follow. Duplicated code has a tendency to both continue to replicate and also to diverge (leaving bugs as two similar implementations differ in subtle ways).

Tuning

This issue has a mass of 98.

We set useful threshold defaults for the languages we support but you may want to adjust these settings based on your project guidelines.

The threshold configuration represents the minimum mass a code block must have to be analyzed for duplication. The lower the threshold, the more fine-grained the comparison.

If the engine is too easily reporting duplication, try raising the threshold. If you suspect that the engine isn't catching enough duplication, try lowering the threshold. The best setting tends to differ from language to language.

See codeclimate-duplication's documentation for more information about tuning the mass threshold in your .codeclimate.yml.

Refactorings

Further Reading

Function __fill_buffer has a Cognitive Complexity of 32 (exceeds 5 allowed). Consider refactoring.
Open

    def __fill_buffer(self):
        """
        Reads any pending data in the interface and stores it in the frame_buffer
        """
Severity: Minor
Found in src/apex/kiss/kiss.py - About 4 hrs to fix

Cognitive Complexity

Cognitive Complexity is a measure of how difficult a unit of code is to intuitively understand. Unlike Cyclomatic Complexity, which determines how difficult your code will be to test, Cognitive Complexity tells you how difficult your code will be to read and comprehend.

A method's cognitive complexity is based on a few simple rules:

  • Code is not considered more complex when it uses shorthand that the language provides for collapsing multiple statements into one
  • Code is considered more complex for each "break in the linear flow of the code"
  • Code is considered more complex when "flow breaking structures are nested"

Further reading

Function configure has a Cognitive Complexity of 29 (exceeds 5 allowed). Consider refactoring.
Open

def configure(configfile, verbose=False):
    global config
    config = find_config(configfile, verbose)
    if config is None:
        echo_colorized_error('No apex configuration found, can not continue.')
Severity: Minor
Found in src/apex/cli.py - About 4 hrs to fix

Cognitive Complexity

Cognitive Complexity is a measure of how difficult a unit of code is to intuitively understand. Unlike Cyclomatic Complexity, which determines how difficult your code will be to test, Cognitive Complexity tells you how difficult your code will be to read and comprehend.

A method's cognitive complexity is based on a few simple rules:

  • Code is not considered more complex when it uses shorthand that the language provides for collapsing multiple statements into one
  • Code is considered more complex for each "break in the linear flow of the code"
  • Code is considered more complex when "flow breaking structures are nested"

Further reading

Function read has a Cognitive Complexity of 21 (exceeds 5 allowed). Consider refactoring.
Open

    def read(self, filter_logresp=True):
        """
        Receives from APRS-IS.

        :param callback: Optional callback to deliver data to.
Severity: Minor
Found in src/apex/aprs/igate.py - About 2 hrs to fix

Cognitive Complexity

Cognitive Complexity is a measure of how difficult a unit of code is to intuitively understand. Unlike Cyclomatic Complexity, which determines how difficult your code will be to test, Cognitive Complexity tells you how difficult your code will be to read and comprehend.

A method's cognitive complexity is based on a few simple rules:

  • Code is not considered more complex when it uses shorthand that the language provides for collapsing multiple statements into one
  • Code is considered more complex for each "break in the linear flow of the code"
  • Code is considered more complex when "flow breaking structures are nested"

Further reading

Similar blocks of code found in 2 locations. Consider refactoring.
Open

            if config.has_option(section, 'com_port') and config.has_option(section, 'baud'):
                com_port = config.get(section, 'com_port')
                baud = config.get(section, 'baud')
                kiss_tnc = apex.buffers.ReconnectingPacketBuffer(apex.aprs.AprsKiss(apex.kiss.KissSerial(com_port=com_port, baud=baud)))
Severity: Major
Found in src/apex/cli.py and 1 other location - About 2 hrs to fix
src/apex/cli.py on lines 135..138

Duplicated Code

Duplicated code can lead to software that is hard to understand and difficult to change. The Don't Repeat Yourself (DRY) principle states:

Every piece of knowledge must have a single, unambiguous, authoritative representation within a system.

When you violate DRY, bugs and maintenance problems are sure to follow. Duplicated code has a tendency to both continue to replicate and also to diverge (leaving bugs as two similar implementations differ in subtle ways).

Tuning

This issue has a mass of 59.

We set useful threshold defaults for the languages we support but you may want to adjust these settings based on your project guidelines.

The threshold configuration represents the minimum mass a code block must have to be analyzed for duplication. The lower the threshold, the more fine-grained the comparison.

If the engine is too easily reporting duplication, try raising the threshold. If you suspect that the engine isn't catching enough duplication, try lowering the threshold. The best setting tends to differ from language to language.

See codeclimate-duplication's documentation for more information about tuning the mass threshold in your .codeclimate.yml.

Refactorings

Further Reading

Similar blocks of code found in 2 locations. Consider refactoring.
Open

            elif config.has_option(section, 'tcp_host') and config.has_option(section, 'tcp_port'):
                tcp_host = config.get(section, 'tcp_host')
                tcp_port = config.get(section, 'tcp_port')
                kiss_tnc = apex.buffers.ReconnectingPacketBuffer(apex.aprs.AprsKiss(apex.kiss.KissTcp(host=tcp_host, tcp_port=tcp_port)))
Severity: Major
Found in src/apex/cli.py and 1 other location - About 2 hrs to fix
src/apex/cli.py on lines 131..134

Duplicated Code

Duplicated code can lead to software that is hard to understand and difficult to change. The Don't Repeat Yourself (DRY) principle states:

Every piece of knowledge must have a single, unambiguous, authoritative representation within a system.

When you violate DRY, bugs and maintenance problems are sure to follow. Duplicated code has a tendency to both continue to replicate and also to diverge (leaving bugs as two similar implementations differ in subtle ways).

Tuning

This issue has a mass of 59.

We set useful threshold defaults for the languages we support but you may want to adjust these settings based on your project guidelines.

The threshold configuration represents the minimum mass a code block must have to be analyzed for duplication. The lower the threshold, the more fine-grained the comparison.

If the engine is too easily reporting duplication, try raising the threshold. If you suspect that the engine isn't catching enough duplication, try lowering the threshold. The best setting tends to differ from language to language.

See codeclimate-duplication's documentation for more information about tuning the mass threshold in your .codeclimate.yml.

Refactorings

Further Reading

Function main has a Cognitive Complexity of 19 (exceeds 5 allowed). Consider refactoring.
Open

def main(verbose, configfile):
    # load the configuration, if it fails, exit
    if not configure(configfile, verbose):
        return
Severity: Minor
Found in src/apex/cli.py - About 2 hrs to fix

Cognitive Complexity

Cognitive Complexity is a measure of how difficult a unit of code is to intuitively understand. Unlike Cyclomatic Complexity, which determines how difficult your code will be to test, Cognitive Complexity tells you how difficult your code will be to read and comprehend.

A method's cognitive complexity is based on a few simple rules:

  • Code is not considered more complex when it uses shorthand that the language provides for collapsing multiple statements into one
  • Code is considered more complex for each "break in the linear flow of the code"
  • Code is considered more complex when "flow breaking structures are nested"

Further reading

Severity
Category
Status
Source
Language