Function getCirclesCurveTangents
has 41 lines of code (exceeds 25 allowed). Consider refactoring. Open
function getCirclesCurveTangents(a: Point, ca: Point, cb: Point, b: Point) {
var d = dist(a, b);
if (d === 0 ||
(d + a.size / 2 <= b.size / 2) ||
(d + b.size / 2 <= a.size / 2)
Function getCirclesCurveTangents
has a Cognitive Complexity of 8 (exceeds 5 allowed). Consider refactoring. Open
function getCirclesCurveTangents(a: Point, ca: Point, cb: Point, b: Point) {
var d = dist(a, b);
if (d === 0 ||
(d + a.size / 2 <= b.size / 2) ||
(d + b.size / 2 <= a.size / 2)
- Read upRead up
Cognitive Complexity
Cognitive Complexity is a measure of how difficult a unit of code is to intuitively understand. Unlike Cyclomatic Complexity, which determines how difficult your code will be to test, Cognitive Complexity tells you how difficult your code will be to read and comprehend.
A method's cognitive complexity is based on a few simple rules:
- Code is not considered more complex when it uses shorthand that the language provides for collapsing multiple statements into one
- Code is considered more complex for each "break in the linear flow of the code"
- Code is considered more complex when "flow breaking structures are nested"
Further reading
Function splitCurveSegment
has 5 arguments (exceeds 4 allowed). Consider refactoring. Open
function splitCurveSegment(t: number, p0: Point, c0: Point, c1: Point, p1: Point) {
Similar blocks of code found in 2 locations. Consider refactoring. Open
if (d === 0 ||
(d + a.size / 2 <= b.size / 2) ||
(d + b.size / 2 <= a.size / 2)
) {
return null;
- Read upRead up
Duplicated Code
Duplicated code can lead to software that is hard to understand and difficult to change. The Don't Repeat Yourself (DRY) principle states:
Every piece of knowledge must have a single, unambiguous, authoritative representation within a system.
When you violate DRY, bugs and maintenance problems are sure to follow. Duplicated code has a tendency to both continue to replicate and also to diverge (leaving bugs as two similar implementations differ in subtle ways).
Tuning
This issue has a mass of 62.
We set useful threshold defaults for the languages we support but you may want to adjust these settings based on your project guidelines.
The threshold configuration represents the minimum mass a code block must have to be analyzed for duplication. The lower the threshold, the more fine-grained the comparison.
If the engine is too easily reporting duplication, try raising the threshold. If you suspect that the engine isn't catching enough duplication, try lowering the threshold. The best setting tends to differ from language to language.
See codeclimate-duplication
's documentation for more information about tuning the mass threshold in your .codeclimate.yml
.
Refactorings
- Extract Method
- Extract Class
- Form Template Method
- Introduce Null Object
- Pull Up Method
- Pull Up Field
- Substitute Algorithm
Further Reading
- Don't Repeat Yourself on the C2 Wiki
- Duplicated Code on SourceMaking
- Refactoring: Improving the Design of Existing Code by Martin Fowler. Duplicated Code, p76
Similar blocks of code found in 2 locations. Consider refactoring. Open
if (d === 0 ||
(d + a.size / 2 <= b.size / 2) ||
(d + b.size / 2 <= a.size / 2)
) {
return null;
- Read upRead up
Duplicated Code
Duplicated code can lead to software that is hard to understand and difficult to change. The Don't Repeat Yourself (DRY) principle states:
Every piece of knowledge must have a single, unambiguous, authoritative representation within a system.
When you violate DRY, bugs and maintenance problems are sure to follow. Duplicated code has a tendency to both continue to replicate and also to diverge (leaving bugs as two similar implementations differ in subtle ways).
Tuning
This issue has a mass of 62.
We set useful threshold defaults for the languages we support but you may want to adjust these settings based on your project guidelines.
The threshold configuration represents the minimum mass a code block must have to be analyzed for duplication. The lower the threshold, the more fine-grained the comparison.
If the engine is too easily reporting duplication, try raising the threshold. If you suspect that the engine isn't catching enough duplication, try lowering the threshold. The best setting tends to differ from language to language.
See codeclimate-duplication
's documentation for more information about tuning the mass threshold in your .codeclimate.yml
.
Refactorings
- Extract Method
- Extract Class
- Form Template Method
- Introduce Null Object
- Pull Up Method
- Pull Up Field
- Substitute Algorithm
Further Reading
- Don't Repeat Yourself on the C2 Wiki
- Duplicated Code on SourceMaking
- Refactoring: Improving the Design of Existing Code by Martin Fowler. Duplicated Code, p76
Similar blocks of code found in 2 locations. Consider refactoring. Open
(p[i].x - p[i - 1].x) * (p[i].x - p[i - 1].x) +
- Read upRead up
Duplicated Code
Duplicated code can lead to software that is hard to understand and difficult to change. The Don't Repeat Yourself (DRY) principle states:
Every piece of knowledge must have a single, unambiguous, authoritative representation within a system.
When you violate DRY, bugs and maintenance problems are sure to follow. Duplicated code has a tendency to both continue to replicate and also to diverge (leaving bugs as two similar implementations differ in subtle ways).
Tuning
This issue has a mass of 53.
We set useful threshold defaults for the languages we support but you may want to adjust these settings based on your project guidelines.
The threshold configuration represents the minimum mass a code block must have to be analyzed for duplication. The lower the threshold, the more fine-grained the comparison.
If the engine is too easily reporting duplication, try raising the threshold. If you suspect that the engine isn't catching enough duplication, try lowering the threshold. The best setting tends to differ from language to language.
See codeclimate-duplication
's documentation for more information about tuning the mass threshold in your .codeclimate.yml
.
Refactorings
- Extract Method
- Extract Class
- Form Template Method
- Introduce Null Object
- Pull Up Method
- Pull Up Field
- Substitute Algorithm
Further Reading
- Don't Repeat Yourself on the C2 Wiki
- Duplicated Code on SourceMaking
- Refactoring: Improving the Design of Existing Code by Martin Fowler. Duplicated Code, p76
Similar blocks of code found in 2 locations. Consider refactoring. Open
(p[i].y - p[i - 1].y) * (p[i].y - p[i - 1].y)
- Read upRead up
Duplicated Code
Duplicated code can lead to software that is hard to understand and difficult to change. The Don't Repeat Yourself (DRY) principle states:
Every piece of knowledge must have a single, unambiguous, authoritative representation within a system.
When you violate DRY, bugs and maintenance problems are sure to follow. Duplicated code has a tendency to both continue to replicate and also to diverge (leaving bugs as two similar implementations differ in subtle ways).
Tuning
This issue has a mass of 53.
We set useful threshold defaults for the languages we support but you may want to adjust these settings based on your project guidelines.
The threshold configuration represents the minimum mass a code block must have to be analyzed for duplication. The lower the threshold, the more fine-grained the comparison.
If the engine is too easily reporting duplication, try raising the threshold. If you suspect that the engine isn't catching enough duplication, try lowering the threshold. The best setting tends to differ from language to language.
See codeclimate-duplication
's documentation for more information about tuning the mass threshold in your .codeclimate.yml
.
Refactorings
- Extract Method
- Extract Class
- Form Template Method
- Introduce Null Object
- Pull Up Method
- Pull Up Field
- Substitute Algorithm
Further Reading
- Don't Repeat Yourself on the C2 Wiki
- Duplicated Code on SourceMaking
- Refactoring: Improving the Design of Existing Code by Martin Fowler. Duplicated Code, p76
Similar blocks of code found in 2 locations. Consider refactoring. Open
`A${a.size / 2},${a.size / 2} 0 ${Number(a.size > b.size)} 1`,
- Read upRead up
Duplicated Code
Duplicated code can lead to software that is hard to understand and difficult to change. The Don't Repeat Yourself (DRY) principle states:
Every piece of knowledge must have a single, unambiguous, authoritative representation within a system.
When you violate DRY, bugs and maintenance problems are sure to follow. Duplicated code has a tendency to both continue to replicate and also to diverge (leaving bugs as two similar implementations differ in subtle ways).
Tuning
This issue has a mass of 50.
We set useful threshold defaults for the languages we support but you may want to adjust these settings based on your project guidelines.
The threshold configuration represents the minimum mass a code block must have to be analyzed for duplication. The lower the threshold, the more fine-grained the comparison.
If the engine is too easily reporting duplication, try raising the threshold. If you suspect that the engine isn't catching enough duplication, try lowering the threshold. The best setting tends to differ from language to language.
See codeclimate-duplication
's documentation for more information about tuning the mass threshold in your .codeclimate.yml
.
Refactorings
- Extract Method
- Extract Class
- Form Template Method
- Introduce Null Object
- Pull Up Method
- Pull Up Field
- Substitute Algorithm
Further Reading
- Don't Repeat Yourself on the C2 Wiki
- Duplicated Code on SourceMaking
- Refactoring: Improving the Design of Existing Code by Martin Fowler. Duplicated Code, p76
Similar blocks of code found in 2 locations. Consider refactoring. Open
`A${b.size / 2},${b.size / 2} 0 ${Number(a.size < b.size)} 1`,
- Read upRead up
Duplicated Code
Duplicated code can lead to software that is hard to understand and difficult to change. The Don't Repeat Yourself (DRY) principle states:
Every piece of knowledge must have a single, unambiguous, authoritative representation within a system.
When you violate DRY, bugs and maintenance problems are sure to follow. Duplicated code has a tendency to both continue to replicate and also to diverge (leaving bugs as two similar implementations differ in subtle ways).
Tuning
This issue has a mass of 50.
We set useful threshold defaults for the languages we support but you may want to adjust these settings based on your project guidelines.
The threshold configuration represents the minimum mass a code block must have to be analyzed for duplication. The lower the threshold, the more fine-grained the comparison.
If the engine is too easily reporting duplication, try raising the threshold. If you suspect that the engine isn't catching enough duplication, try lowering the threshold. The best setting tends to differ from language to language.
See codeclimate-duplication
's documentation for more information about tuning the mass threshold in your .codeclimate.yml
.
Refactorings
- Extract Method
- Extract Class
- Form Template Method
- Introduce Null Object
- Pull Up Method
- Pull Up Field
- Substitute Algorithm
Further Reading
- Don't Repeat Yourself on the C2 Wiki
- Duplicated Code on SourceMaking
- Refactoring: Improving the Design of Existing Code by Martin Fowler. Duplicated Code, p76
Similar blocks of code found in 2 locations. Consider refactoring. Open
var lpoints = [
mtan.left[0],
bezierPt(0.5, mtan.left[1], ntan.left[0]),
ntan.left[1]
];
- Read upRead up
Duplicated Code
Duplicated code can lead to software that is hard to understand and difficult to change. The Don't Repeat Yourself (DRY) principle states:
Every piece of knowledge must have a single, unambiguous, authoritative representation within a system.
When you violate DRY, bugs and maintenance problems are sure to follow. Duplicated code has a tendency to both continue to replicate and also to diverge (leaving bugs as two similar implementations differ in subtle ways).
Tuning
This issue has a mass of 49.
We set useful threshold defaults for the languages we support but you may want to adjust these settings based on your project guidelines.
The threshold configuration represents the minimum mass a code block must have to be analyzed for duplication. The lower the threshold, the more fine-grained the comparison.
If the engine is too easily reporting duplication, try raising the threshold. If you suspect that the engine isn't catching enough duplication, try lowering the threshold. The best setting tends to differ from language to language.
See codeclimate-duplication
's documentation for more information about tuning the mass threshold in your .codeclimate.yml
.
Refactorings
- Extract Method
- Extract Class
- Form Template Method
- Introduce Null Object
- Pull Up Method
- Pull Up Field
- Substitute Algorithm
Further Reading
- Don't Repeat Yourself on the C2 Wiki
- Duplicated Code on SourceMaking
- Refactoring: Improving the Design of Existing Code by Martin Fowler. Duplicated Code, p76
Similar blocks of code found in 2 locations. Consider refactoring. Open
var rpoints = [
mtan.right[0],
bezierPt(0.5, mtan.right[1], ntan.right[0]),
ntan.right[1]
];
- Read upRead up
Duplicated Code
Duplicated code can lead to software that is hard to understand and difficult to change. The Don't Repeat Yourself (DRY) principle states:
Every piece of knowledge must have a single, unambiguous, authoritative representation within a system.
When you violate DRY, bugs and maintenance problems are sure to follow. Duplicated code has a tendency to both continue to replicate and also to diverge (leaving bugs as two similar implementations differ in subtle ways).
Tuning
This issue has a mass of 49.
We set useful threshold defaults for the languages we support but you may want to adjust these settings based on your project guidelines.
The threshold configuration represents the minimum mass a code block must have to be analyzed for duplication. The lower the threshold, the more fine-grained the comparison.
If the engine is too easily reporting duplication, try raising the threshold. If you suspect that the engine isn't catching enough duplication, try lowering the threshold. The best setting tends to differ from language to language.
See codeclimate-duplication
's documentation for more information about tuning the mass threshold in your .codeclimate.yml
.
Refactorings
- Extract Method
- Extract Class
- Form Template Method
- Introduce Null Object
- Pull Up Method
- Pull Up Field
- Substitute Algorithm
Further Reading
- Don't Repeat Yourself on the C2 Wiki
- Duplicated Code on SourceMaking
- Refactoring: Improving the Design of Existing Code by Martin Fowler. Duplicated Code, p76
Similar blocks of code found in 2 locations. Consider refactoring. Open
`A${a.size / 2},${a.size / 2} 0 ${Number(qb > Math.PI)} 1`,
- Read upRead up
Duplicated Code
Duplicated code can lead to software that is hard to understand and difficult to change. The Don't Repeat Yourself (DRY) principle states:
Every piece of knowledge must have a single, unambiguous, authoritative representation within a system.
When you violate DRY, bugs and maintenance problems are sure to follow. Duplicated code has a tendency to both continue to replicate and also to diverge (leaving bugs as two similar implementations differ in subtle ways).
Tuning
This issue has a mass of 46.
We set useful threshold defaults for the languages we support but you may want to adjust these settings based on your project guidelines.
The threshold configuration represents the minimum mass a code block must have to be analyzed for duplication. The lower the threshold, the more fine-grained the comparison.
If the engine is too easily reporting duplication, try raising the threshold. If you suspect that the engine isn't catching enough duplication, try lowering the threshold. The best setting tends to differ from language to language.
See codeclimate-duplication
's documentation for more information about tuning the mass threshold in your .codeclimate.yml
.
Refactorings
- Extract Method
- Extract Class
- Form Template Method
- Introduce Null Object
- Pull Up Method
- Pull Up Field
- Substitute Algorithm
Further Reading
- Don't Repeat Yourself on the C2 Wiki
- Duplicated Code on SourceMaking
- Refactoring: Improving the Design of Existing Code by Martin Fowler. Duplicated Code, p76
Similar blocks of code found in 2 locations. Consider refactoring. Open
`A${b.size / 2},${b.size / 2} 0 ${Number(qa > Math.PI)} 1`,
- Read upRead up
Duplicated Code
Duplicated code can lead to software that is hard to understand and difficult to change. The Don't Repeat Yourself (DRY) principle states:
Every piece of knowledge must have a single, unambiguous, authoritative representation within a system.
When you violate DRY, bugs and maintenance problems are sure to follow. Duplicated code has a tendency to both continue to replicate and also to diverge (leaving bugs as two similar implementations differ in subtle ways).
Tuning
This issue has a mass of 46.
We set useful threshold defaults for the languages we support but you may want to adjust these settings based on your project guidelines.
The threshold configuration represents the minimum mass a code block must have to be analyzed for duplication. The lower the threshold, the more fine-grained the comparison.
If the engine is too easily reporting duplication, try raising the threshold. If you suspect that the engine isn't catching enough duplication, try lowering the threshold. The best setting tends to differ from language to language.
See codeclimate-duplication
's documentation for more information about tuning the mass threshold in your .codeclimate.yml
.
Refactorings
- Extract Method
- Extract Class
- Form Template Method
- Introduce Null Object
- Pull Up Method
- Pull Up Field
- Substitute Algorithm
Further Reading
- Don't Repeat Yourself on the C2 Wiki
- Duplicated Code on SourceMaking
- Refactoring: Improving the Design of Existing Code by Martin Fowler. Duplicated Code, p76
Forbidden 'var' keyword, use 'let' or 'const' instead Open
for (var i = 1; i < p.length; i++) {
- Read upRead up
- Exclude checks
Rule: no-var-keyword
Disallows usage of the var
keyword.
Use let
or const
instead.
Rationale
Declaring variables using var
has several edge case behaviors that make var
unsuitable for modern code.
Variables declared by var
have their parent function block as their scope, ignoring other control flow statements.
var
s have declaration "hoisting" (similar to function
s) and can appear to be used before declaration.
Variables declared by const
and let
instead have as their scope the block in which they are defined,
and are not allowed to used before declaration or be re-declared with another const
or let
.
Notes
- Has Fix
Config
Not configurable.
Examples
"no-var-keyword": true
For more information see this page.
Forbidden 'var' keyword, use 'let' or 'const' instead Open
var tl = 1 / (1 +
- Read upRead up
- Exclude checks
Rule: no-var-keyword
Disallows usage of the var
keyword.
Use let
or const
instead.
Rationale
Declaring variables using var
has several edge case behaviors that make var
unsuitable for modern code.
Variables declared by var
have their parent function block as their scope, ignoring other control flow statements.
var
s have declaration "hoisting" (similar to function
s) and can appear to be used before declaration.
Variables declared by const
and let
instead have as their scope the block in which they are defined,
and are not allowed to used before declaration or be re-declared with another const
or let
.
Notes
- Has Fix
Config
Not configurable.
Examples
"no-var-keyword": true
For more information see this page.
Forbidden 'var' keyword, use 'let' or 'const' instead Open
var d = dist(a, b);
- Read upRead up
- Exclude checks
Rule: no-var-keyword
Disallows usage of the var
keyword.
Use let
or const
instead.
Rationale
Declaring variables using var
has several edge case behaviors that make var
unsuitable for modern code.
Variables declared by var
have their parent function block as their scope, ignoring other control flow statements.
var
s have declaration "hoisting" (similar to function
s) and can appear to be used before declaration.
Variables declared by const
and let
instead have as their scope the block in which they are defined,
and are not allowed to used before declaration or be re-declared with another const
or let
.
Notes
- Has Fix
Config
Not configurable.
Examples
"no-var-keyword": true
For more information see this page.
Forbidden 'var' keyword, use 'let' or 'const' instead Open
var seg1 = splitCurveSegment(2 * kt, ...curve);
- Read upRead up
- Exclude checks
Rule: no-var-keyword
Disallows usage of the var
keyword.
Use let
or const
instead.
Rationale
Declaring variables using var
has several edge case behaviors that make var
unsuitable for modern code.
Variables declared by var
have their parent function block as their scope, ignoring other control flow statements.
var
s have declaration "hoisting" (similar to function
s) and can appear to be used before declaration.
Variables declared by const
and let
instead have as their scope the block in which they are defined,
and are not allowed to used before declaration or be re-declared with another const
or let
.
Notes
- Has Fix
Config
Not configurable.
Examples
"no-var-keyword": true
For more information see this page.
Identifier 'rc' is never reassigned; use 'const' instead of 'var'. Open
var rc = bezierPt(1 / 3 / kt, mtan.right[0], rq);
- Read upRead up
- Exclude checks
Rule: prefer-const
Requires that variable declarations use const
instead of let
and var
if possible.
If a variable is only assigned to once when it is declared, it should be declared using 'const'
Notes
- Has Fix
Config
An optional object containing the property "destructuring" with two possible values:
- "any" (default) - If any variable in destructuring can be const, this rule warns for those variables.
- "all" - Only warns if all variables in destructuring can be const.
Examples
"prefer-const": true
"prefer-const": true,[object Object]
Schema
{
"type": "object",
"properties": {
"destructuring": {
"type": "string",
"enum": [
"all",
"any"
]
}
}
}
For more information see this page.
Forbidden 'var' keyword, use 'let' or 'const' instead Open
var total = 0;
- Read upRead up
- Exclude checks
Rule: no-var-keyword
Disallows usage of the var
keyword.
Use let
or const
instead.
Rationale
Declaring variables using var
has several edge case behaviors that make var
unsuitable for modern code.
Variables declared by var
have their parent function block as their scope, ignoring other control flow statements.
var
s have declaration "hoisting" (similar to function
s) and can appear to be used before declaration.
Variables declared by const
and let
instead have as their scope the block in which they are defined,
and are not allowed to used before declaration or be re-declared with another const
or let
.
Notes
- Has Fix
Config
Not configurable.
Examples
"no-var-keyword": true
For more information see this page.
Identifier 'seg' is never reassigned; use 'const' instead of 'var'. Open
var seg = split(t, p0, c0, c1, p1);
- Read upRead up
- Exclude checks
Rule: prefer-const
Requires that variable declarations use const
instead of let
and var
if possible.
If a variable is only assigned to once when it is declared, it should be declared using 'const'
Notes
- Has Fix
Config
An optional object containing the property "destructuring" with two possible values:
- "any" (default) - If any variable in destructuring can be const, this rule warns for those variables.
- "all" - Only warns if all variables in destructuring can be const.
Examples
"prefer-const": true
"prefer-const": true,[object Object]
Schema
{
"type": "object",
"properties": {
"destructuring": {
"type": "string",
"enum": [
"all",
"any"
]
}
}
}
For more information see this page.
Forbidden 'var' keyword, use 'let' or 'const' instead Open
var ntan = getCirclesTangents(m, n);
- Read upRead up
- Exclude checks
Rule: no-var-keyword
Disallows usage of the var
keyword.
Use let
or const
instead.
Rationale
Declaring variables using var
has several edge case behaviors that make var
unsuitable for modern code.
Variables declared by var
have their parent function block as their scope, ignoring other control flow statements.
var
s have declaration "hoisting" (similar to function
s) and can appear to be used before declaration.
Variables declared by const
and let
instead have as their scope the block in which they are defined,
and are not allowed to used before declaration or be re-declared with another const
or let
.
Notes
- Has Fix
Config
Not configurable.
Examples
"no-var-keyword": true
For more information see this page.
Identifier 'c' is never reassigned; use 'const' instead of 'var'. Open
var c = bezierPt(2, m, p1);
- Read upRead up
- Exclude checks
Rule: prefer-const
Requires that variable declarations use const
instead of let
and var
if possible.
If a variable is only assigned to once when it is declared, it should be declared using 'const'
Notes
- Has Fix
Config
An optional object containing the property "destructuring" with two possible values:
- "any" (default) - If any variable in destructuring can be const, this rule warns for those variables.
- "all" - Only warns if all variables in destructuring can be const.
Examples
"prefer-const": true
"prefer-const": true,[object Object]
Schema
{
"type": "object",
"properties": {
"destructuring": {
"type": "string",
"enum": [
"all",
"any"
]
}
}
}
For more information see this page.
Forbidden 'var' keyword, use 'let' or 'const' instead Open
var d = dist(a, b);
- Read upRead up
- Exclude checks
Rule: no-var-keyword
Disallows usage of the var
keyword.
Use let
or const
instead.
Rationale
Declaring variables using var
has several edge case behaviors that make var
unsuitable for modern code.
Variables declared by var
have their parent function block as their scope, ignoring other control flow statements.
var
s have declaration "hoisting" (similar to function
s) and can appear to be used before declaration.
Variables declared by const
and let
instead have as their scope the block in which they are defined,
and are not allowed to used before declaration or be re-declared with another const
or let
.
Notes
- Has Fix
Config
Not configurable.
Examples
"no-var-keyword": true
For more information see this page.
Identifier 'm' is never reassigned; use 'const' instead of 'var'. Open
var m = seg2[3];
- Read upRead up
- Exclude checks
Rule: prefer-const
Requires that variable declarations use const
instead of let
and var
if possible.
If a variable is only assigned to once when it is declared, it should be declared using 'const'
Notes
- Has Fix
Config
An optional object containing the property "destructuring" with two possible values:
- "any" (default) - If any variable in destructuring can be const, this rule warns for those variables.
- "all" - Only warns if all variables in destructuring can be const.
Examples
"prefer-const": true
"prefer-const": true,[object Object]
Schema
{
"type": "object",
"properties": {
"destructuring": {
"type": "string",
"enum": [
"all",
"any"
]
}
}
}
For more information see this page.
Forbidden 'var' keyword, use 'let' or 'const' instead Open
var segments = [];
- Read upRead up
- Exclude checks
Rule: no-var-keyword
Disallows usage of the var
keyword.
Use let
or const
instead.
Rationale
Declaring variables using var
has several edge case behaviors that make var
unsuitable for modern code.
Variables declared by var
have their parent function block as their scope, ignoring other control flow statements.
var
s have declaration "hoisting" (similar to function
s) and can appear to be used before declaration.
Variables declared by const
and let
instead have as their scope the block in which they are defined,
and are not allowed to used before declaration or be re-declared with another const
or let
.
Notes
- Has Fix
Config
Not configurable.
Examples
"no-var-keyword": true
For more information see this page.
Identifier 'd' is never reassigned; use 'const' instead of 'var'. Open
var d = dist(a, b);
- Read upRead up
- Exclude checks
Rule: prefer-const
Requires that variable declarations use const
instead of let
and var
if possible.
If a variable is only assigned to once when it is declared, it should be declared using 'const'
Notes
- Has Fix
Config
An optional object containing the property "destructuring" with two possible values:
- "any" (default) - If any variable in destructuring can be const, this rule warns for those variables.
- "all" - Only warns if all variables in destructuring can be const.
Examples
"prefer-const": true
"prefer-const": true,[object Object]
Schema
{
"type": "object",
"properties": {
"destructuring": {
"type": "string",
"enum": [
"all",
"any"
]
}
}
}
For more information see this page.
Forbidden 'var' keyword, use 'let' or 'const' instead Open
var ta = Math.asin((a.size - b.size) / d / 2);
- Read upRead up
- Exclude checks
Rule: no-var-keyword
Disallows usage of the var
keyword.
Use let
or const
instead.
Rationale
Declaring variables using var
has several edge case behaviors that make var
unsuitable for modern code.
Variables declared by var
have their parent function block as their scope, ignoring other control flow statements.
var
s have declaration "hoisting" (similar to function
s) and can appear to be used before declaration.
Variables declared by const
and let
instead have as their scope the block in which they are defined,
and are not allowed to used before declaration or be re-declared with another const
or let
.
Notes
- Has Fix
Config
Not configurable.
Examples
"no-var-keyword": true
For more information see this page.
Forbidden 'var' keyword, use 'let' or 'const' instead Open
var mtan = getCirclesTangents(curve[0], m);
- Read upRead up
- Exclude checks
Rule: no-var-keyword
Disallows usage of the var
keyword.
Use let
or const
instead.
Rationale
Declaring variables using var
has several edge case behaviors that make var
unsuitable for modern code.
Variables declared by var
have their parent function block as their scope, ignoring other control flow statements.
var
s have declaration "hoisting" (similar to function
s) and can appear to be used before declaration.
Variables declared by const
and let
instead have as their scope the block in which they are defined,
and are not allowed to used before declaration or be re-declared with another const
or let
.
Notes
- Has Fix
Config
Not configurable.
Examples
"no-var-keyword": true
For more information see this page.
Forbidden 'var' keyword, use 'let' or 'const' instead Open
var rq = approximateQuadCurve(...rpoints)[1];
- Read upRead up
- Exclude checks
Rule: no-var-keyword
Disallows usage of the var
keyword.
Use let
or const
instead.
Rationale
Declaring variables using var
has several edge case behaviors that make var
unsuitable for modern code.
Variables declared by var
have their parent function block as their scope, ignoring other control flow statements.
var
s have declaration "hoisting" (similar to function
s) and can appear to be used before declaration.
Variables declared by const
and let
instead have as their scope the block in which they are defined,
and are not allowed to used before declaration or be re-declared with another const
or let
.
Notes
- Has Fix
Config
Not configurable.
Examples
"no-var-keyword": true
For more information see this page.
Forbidden 'var' keyword, use 'let' or 'const' instead Open
var tend = getTangentsVectors(true);
- Read upRead up
- Exclude checks
Rule: no-var-keyword
Disallows usage of the var
keyword.
Use let
or const
instead.
Rationale
Declaring variables using var
has several edge case behaviors that make var
unsuitable for modern code.
Variables declared by var
have their parent function block as their scope, ignoring other control flow statements.
var
s have declaration "hoisting" (similar to function
s) and can appear to be used before declaration.
Variables declared by const
and let
instead have as their scope the block in which they are defined,
and are not allowed to used before declaration or be re-declared with another const
or let
.
Notes
- Has Fix
Config
Not configurable.
Examples
"no-var-keyword": true
For more information see this page.
Identifier 'd' is never reassigned; use 'const' instead of 'var'. Open
var d = dist(a, b);
- Read upRead up
- Exclude checks
Rule: prefer-const
Requires that variable declarations use const
instead of let
and var
if possible.
If a variable is only assigned to once when it is declared, it should be declared using 'const'
Notes
- Has Fix
Config
An optional object containing the property "destructuring" with two possible values:
- "any" (default) - If any variable in destructuring can be const, this rule warns for those variables.
- "all" - Only warns if all variables in destructuring can be const.
Examples
"prefer-const": true
"prefer-const": true,[object Object]
Schema
{
"type": "object",
"properties": {
"destructuring": {
"type": "string",
"enum": [
"all",
"any"
]
}
}
}
For more information see this page.
Identifier 'aright' is never reassigned; use 'const' instead of 'var'. Open
var aright = (ma + Math.PI / 2 - ta);
- Read upRead up
- Exclude checks
Rule: prefer-const
Requires that variable declarations use const
instead of let
and var
if possible.
If a variable is only assigned to once when it is declared, it should be declared using 'const'
Notes
- Has Fix
Config
An optional object containing the property "destructuring" with two possible values:
- "any" (default) - If any variable in destructuring can be const, this rule warns for those variables.
- "all" - Only warns if all variables in destructuring can be const.
Examples
"prefer-const": true
"prefer-const": true,[object Object]
Schema
{
"type": "object",
"properties": {
"destructuring": {
"type": "string",
"enum": [
"all",
"any"
]
}
}
}
For more information see this page.
Forbidden 'var' keyword, use 'let' or 'const' instead Open
var ctan = getCirclesCurveTangents(a, ca, cb, b);
- Read upRead up
- Exclude checks
Rule: no-var-keyword
Disallows usage of the var
keyword.
Use let
or const
instead.
Rationale
Declaring variables using var
has several edge case behaviors that make var
unsuitable for modern code.
Variables declared by var
have their parent function block as their scope, ignoring other control flow statements.
var
s have declaration "hoisting" (similar to function
s) and can appear to be used before declaration.
Variables declared by const
and let
instead have as their scope the block in which they are defined,
and are not allowed to used before declaration or be re-declared with another const
or let
.
Notes
- Has Fix
Config
Not configurable.
Examples
"no-var-keyword": true
For more information see this page.
Identifier 'rpoints' is never reassigned; use 'const' instead of 'var'. Open
var rpoints = [
- Read upRead up
- Exclude checks
Rule: prefer-const
Requires that variable declarations use const
instead of let
and var
if possible.
If a variable is only assigned to once when it is declared, it should be declared using 'const'
Notes
- Has Fix
Config
An optional object containing the property "destructuring" with two possible values:
- "any" (default) - If any variable in destructuring can be const, this rule warns for those variables.
- "all" - Only warns if all variables in destructuring can be const.
Examples
"prefer-const": true
"prefer-const": true,[object Object]
Schema
{
"type": "object",
"properties": {
"destructuring": {
"type": "string",
"enum": [
"all",
"any"
]
}
}
}
For more information see this page.
Forbidden 'var' keyword, use 'let' or 'const' instead Open
var rpoints = [
- Read upRead up
- Exclude checks
Rule: no-var-keyword
Disallows usage of the var
keyword.
Use let
or const
instead.
Rationale
Declaring variables using var
has several edge case behaviors that make var
unsuitable for modern code.
Variables declared by var
have their parent function block as their scope, ignoring other control flow statements.
var
s have declaration "hoisting" (similar to function
s) and can appear to be used before declaration.
Variables declared by const
and let
instead have as their scope the block in which they are defined,
and are not allowed to used before declaration or be re-declared with another const
or let
.
Notes
- Has Fix
Config
Not configurable.
Examples
"no-var-keyword": true
For more information see this page.
Identifier 'tstart' is never reassigned; use 'const' instead of 'var'. Open
var tstart = getTangentsVectors(false);
- Read upRead up
- Exclude checks
Rule: prefer-const
Requires that variable declarations use const
instead of let
and var
if possible.
If a variable is only assigned to once when it is declared, it should be declared using 'const'
Notes
- Has Fix
Config
An optional object containing the property "destructuring" with two possible values:
- "any" (default) - If any variable in destructuring can be const, this rule warns for those variables.
- "all" - Only warns if all variables in destructuring can be const.
Examples
"prefer-const": true
"prefer-const": true,[object Object]
Schema
{
"type": "object",
"properties": {
"destructuring": {
"type": "string",
"enum": [
"all",
"any"
]
}
}
}
For more information see this page.
Identifier 'r' is never reassigned; use 'const' instead of 'var'. Open
var r = (pt.size / 2);
- Read upRead up
- Exclude checks
Rule: prefer-const
Requires that variable declarations use const
instead of let
and var
if possible.
If a variable is only assigned to once when it is declared, it should be declared using 'const'
Notes
- Has Fix
Config
An optional object containing the property "destructuring" with two possible values:
- "any" (default) - If any variable in destructuring can be const, this rule warns for those variables.
- "all" - Only warns if all variables in destructuring can be const.
Examples
"prefer-const": true
"prefer-const": true,[object Object]
Schema
{
"type": "object",
"properties": {
"destructuring": {
"type": "string",
"enum": [
"all",
"any"
]
}
}
}
For more information see this page.
Identifier 'ntan' is never reassigned; use 'const' instead of 'var'. Open
var ntan = getCirclesTangents(m, n);
- Read upRead up
- Exclude checks
Rule: prefer-const
Requires that variable declarations use const
instead of let
and var
if possible.
If a variable is only assigned to once when it is declared, it should be declared using 'const'
Notes
- Has Fix
Config
An optional object containing the property "destructuring" with two possible values:
- "any" (default) - If any variable in destructuring can be const, this rule warns for those variables.
- "all" - Only warns if all variables in destructuring can be const.
Examples
"prefer-const": true
"prefer-const": true,[object Object]
Schema
{
"type": "object",
"properties": {
"destructuring": {
"type": "string",
"enum": [
"all",
"any"
]
}
}
}
For more information see this page.
Forbidden 'var' keyword, use 'let' or 'const' instead Open
var qa = rotation(angle(a, ctan.right[0]), angle(a, ctan.left[0]));
- Read upRead up
- Exclude checks
Rule: no-var-keyword
Disallows usage of the var
keyword.
Use let
or const
instead.
Rationale
Declaring variables using var
has several edge case behaviors that make var
unsuitable for modern code.
Variables declared by var
have their parent function block as their scope, ignoring other control flow statements.
var
s have declaration "hoisting" (similar to function
s) and can appear to be used before declaration.
Variables declared by const
and let
instead have as their scope the block in which they are defined,
and are not allowed to used before declaration or be re-declared with another const
or let
.
Notes
- Has Fix
Config
Not configurable.
Examples
"no-var-keyword": true
For more information see this page.
Forbidden 'var' keyword, use 'let' or 'const' instead Open
var c = bezierPt(2, m, p1);
- Read upRead up
- Exclude checks
Rule: no-var-keyword
Disallows usage of the var
keyword.
Use let
or const
instead.
Rationale
Declaring variables using var
has several edge case behaviors that make var
unsuitable for modern code.
Variables declared by var
have their parent function block as their scope, ignoring other control flow statements.
var
s have declaration "hoisting" (similar to function
s) and can appear to be used before declaration.
Variables declared by const
and let
instead have as their scope the block in which they are defined,
and are not allowed to used before declaration or be re-declared with another const
or let
.
Notes
- Has Fix
Config
Not configurable.
Examples
"no-var-keyword": true
For more information see this page.
Forbidden 'var' keyword, use 'let' or 'const' instead Open
var ma = angle(a, b);
- Read upRead up
- Exclude checks
Rule: no-var-keyword
Disallows usage of the var
keyword.
Use let
or const
instead.
Rationale
Declaring variables using var
has several edge case behaviors that make var
unsuitable for modern code.
Variables declared by var
have their parent function block as their scope, ignoring other control flow statements.
var
s have declaration "hoisting" (similar to function
s) and can appear to be used before declaration.
Variables declared by const
and let
instead have as their scope the block in which they are defined,
and are not allowed to used before declaration or be re-declared with another const
or let
.
Notes
- Has Fix
Config
Not configurable.
Examples
"no-var-keyword": true
For more information see this page.
Forbidden 'var' keyword, use 'let' or 'const' instead Open
var lq = approximateQuadCurve(...lpoints)[1];
- Read upRead up
- Exclude checks
Rule: no-var-keyword
Disallows usage of the var
keyword.
Use let
or const
instead.
Rationale
Declaring variables using var
has several edge case behaviors that make var
unsuitable for modern code.
Variables declared by var
have their parent function block as their scope, ignoring other control flow statements.
var
s have declaration "hoisting" (similar to function
s) and can appear to be used before declaration.
Variables declared by const
and let
instead have as their scope the block in which they are defined,
and are not allowed to used before declaration or be re-declared with another const
or let
.
Notes
- Has Fix
Config
Not configurable.
Examples
"no-var-keyword": true
For more information see this page.
Identifier 'tl' is never reassigned; use 'const' instead of 'var'. Open
var tl = 1 / (1 +
- Read upRead up
- Exclude checks
Rule: prefer-const
Requires that variable declarations use const
instead of let
and var
if possible.
If a variable is only assigned to once when it is declared, it should be declared using 'const'
Notes
- Has Fix
Config
An optional object containing the property "destructuring" with two possible values:
- "any" (default) - If any variable in destructuring can be const, this rule warns for those variables.
- "all" - Only warns if all variables in destructuring can be const.
Examples
"prefer-const": true
"prefer-const": true,[object Object]
Schema
{
"type": "object",
"properties": {
"destructuring": {
"type": "string",
"enum": [
"all",
"any"
]
}
}
}
For more information see this page.
Identifier 'lq' is never reassigned; use 'const' instead of 'var'. Open
var lq = approximateQuadCurve(...lpoints)[1];
- Read upRead up
- Exclude checks
Rule: prefer-const
Requires that variable declarations use const
instead of let
and var
if possible.
If a variable is only assigned to once when it is declared, it should be declared using 'const'
Notes
- Has Fix
Config
An optional object containing the property "destructuring" with two possible values:
- "any" (default) - If any variable in destructuring can be const, this rule warns for those variables.
- "all" - Only warns if all variables in destructuring can be const.
Examples
"prefer-const": true
"prefer-const": true,[object Object]
Schema
{
"type": "object",
"properties": {
"destructuring": {
"type": "string",
"enum": [
"all",
"any"
]
}
}
}
For more information see this page.
Forbidden 'var' keyword, use 'let' or 'const' instead Open
var seg = split(t, p0, c0, c1, p1);
- Read upRead up
- Exclude checks
Rule: no-var-keyword
Disallows usage of the var
keyword.
Use let
or const
instead.
Rationale
Declaring variables using var
has several edge case behaviors that make var
unsuitable for modern code.
Variables declared by var
have their parent function block as their scope, ignoring other control flow statements.
var
s have declaration "hoisting" (similar to function
s) and can appear to be used before declaration.
Variables declared by const
and let
instead have as their scope the block in which they are defined,
and are not allowed to used before declaration or be re-declared with another const
or let
.
Notes
- Has Fix
Config
Not configurable.
Examples
"no-var-keyword": true
For more information see this page.
Forbidden 'var' keyword, use 'let' or 'const' instead Open
var aleft = (ma - Math.PI / 2 + ta);
- Read upRead up
- Exclude checks
Rule: no-var-keyword
Disallows usage of the var
keyword.
Use let
or const
instead.
Rationale
Declaring variables using var
has several edge case behaviors that make var
unsuitable for modern code.
Variables declared by var
have their parent function block as their scope, ignoring other control flow statements.
var
s have declaration "hoisting" (similar to function
s) and can appear to be used before declaration.
Variables declared by const
and let
instead have as their scope the block in which they are defined,
and are not allowed to used before declaration or be re-declared with another const
or let
.
Notes
- Has Fix
Config
Not configurable.
Examples
"no-var-keyword": true
For more information see this page.
Forbidden 'var' keyword, use 'let' or 'const' instead Open
var n = seg2[6];
- Read upRead up
- Exclude checks
Rule: no-var-keyword
Disallows usage of the var
keyword.
Use let
or const
instead.
Rationale
Declaring variables using var
has several edge case behaviors that make var
unsuitable for modern code.
Variables declared by var
have their parent function block as their scope, ignoring other control flow statements.
var
s have declaration "hoisting" (similar to function
s) and can appear to be used before declaration.
Variables declared by const
and let
instead have as their scope the block in which they are defined,
and are not allowed to used before declaration or be re-declared with another const
or let
.
Notes
- Has Fix
Config
Not configurable.
Examples
"no-var-keyword": true
For more information see this page.
Forbidden 'var' keyword, use 'let' or 'const' instead Open
var lpoints = [
- Read upRead up
- Exclude checks
Rule: no-var-keyword
Disallows usage of the var
keyword.
Use let
or const
instead.
Rationale
Declaring variables using var
has several edge case behaviors that make var
unsuitable for modern code.
Variables declared by var
have their parent function block as their scope, ignoring other control flow statements.
var
s have declaration "hoisting" (similar to function
s) and can appear to be used before declaration.
Variables declared by const
and let
instead have as their scope the block in which they are defined,
and are not allowed to used before declaration or be re-declared with another const
or let
.
Notes
- Has Fix
Config
Not configurable.
Examples
"no-var-keyword": true
For more information see this page.
Identifier 'ctan' is never reassigned; use 'const' instead of 'var'. Open
var ctan = getCirclesCurveTangents(a, ca, cb, b);
- Read upRead up
- Exclude checks
Rule: prefer-const
Requires that variable declarations use const
instead of let
and var
if possible.
If a variable is only assigned to once when it is declared, it should be declared using 'const'
Notes
- Has Fix
Config
An optional object containing the property "destructuring" with two possible values:
- "any" (default) - If any variable in destructuring can be const, this rule warns for those variables.
- "all" - Only warns if all variables in destructuring can be const.
Examples
"prefer-const": true
"prefer-const": true,[object Object]
Schema
{
"type": "object",
"properties": {
"destructuring": {
"type": "string",
"enum": [
"all",
"any"
]
}
}
}
For more information see this page.
Identifier 'ma' is never reassigned; use 'const' instead of 'var'. Open
var ma = angle(a, b);
- Read upRead up
- Exclude checks
Rule: prefer-const
Requires that variable declarations use const
instead of let
and var
if possible.
If a variable is only assigned to once when it is declared, it should be declared using 'const'
Notes
- Has Fix
Config
An optional object containing the property "destructuring" with two possible values:
- "any" (default) - If any variable in destructuring can be const, this rule warns for those variables.
- "all" - Only warns if all variables in destructuring can be const.
Examples
"prefer-const": true
"prefer-const": true,[object Object]
Schema
{
"type": "object",
"properties": {
"destructuring": {
"type": "string",
"enum": [
"all",
"any"
]
}
}
}
For more information see this page.
Identifier 'seg1' is never reassigned; use 'const' instead of 'var'. Open
var seg1 = splitCurveSegment(2 * kt, ...curve);
- Read upRead up
- Exclude checks
Rule: prefer-const
Requires that variable declarations use const
instead of let
and var
if possible.
If a variable is only assigned to once when it is declared, it should be declared using 'const'
Notes
- Has Fix
Config
An optional object containing the property "destructuring" with two possible values:
- "any" (default) - If any variable in destructuring can be const, this rule warns for those variables.
- "all" - Only warns if all variables in destructuring can be const.
Examples
"prefer-const": true
"prefer-const": true,[object Object]
Schema
{
"type": "object",
"properties": {
"destructuring": {
"type": "string",
"enum": [
"all",
"any"
]
}
}
}
For more information see this page.
Forbidden 'var' keyword, use 'let' or 'const' instead Open
for (var i = 1; i < points.length; i++) {
- Read upRead up
- Exclude checks
Rule: no-var-keyword
Disallows usage of the var
keyword.
Use let
or const
instead.
Rationale
Declaring variables using var
has several edge case behaviors that make var
unsuitable for modern code.
Variables declared by var
have their parent function block as their scope, ignoring other control flow statements.
var
s have declaration "hoisting" (similar to function
s) and can appear to be used before declaration.
Variables declared by const
and let
instead have as their scope the block in which they are defined,
and are not allowed to used before declaration or be re-declared with another const
or let
.
Notes
- Has Fix
Config
Not configurable.
Examples
"no-var-keyword": true
For more information see this page.
Forbidden 'var' keyword, use 'let' or 'const' instead Open
var tan = getCirclesTangents(a, b);
- Read upRead up
- Exclude checks
Rule: no-var-keyword
Disallows usage of the var
keyword.
Use let
or const
instead.
Rationale
Declaring variables using var
has several edge case behaviors that make var
unsuitable for modern code.
Variables declared by var
have their parent function block as their scope, ignoring other control flow statements.
var
s have declaration "hoisting" (similar to function
s) and can appear to be used before declaration.
Variables declared by const
and let
instead have as their scope the block in which they are defined,
and are not allowed to used before declaration or be re-declared with another const
or let
.
Notes
- Has Fix
Config
Not configurable.
Examples
"no-var-keyword": true
For more information see this page.
Identifier 'qa' is never reassigned; use 'const' instead of 'var'. Open
var qa = rotation(angle(a, ctan.right[0]), angle(a, ctan.left[0]));
- Read upRead up
- Exclude checks
Rule: prefer-const
Requires that variable declarations use const
instead of let
and var
if possible.
If a variable is only assigned to once when it is declared, it should be declared using 'const'
Notes
- Has Fix
Config
An optional object containing the property "destructuring" with two possible values:
- "any" (default) - If any variable in destructuring can be const, this rule warns for those variables.
- "all" - Only warns if all variables in destructuring can be const.
Examples
"prefer-const": true
"prefer-const": true,[object Object]
Schema
{
"type": "object",
"properties": {
"destructuring": {
"type": "string",
"enum": [
"all",
"any"
]
}
}
}
For more information see this page.
Identifier 'lc' is never reassigned; use 'const' instead of 'var'. Open
var lc = bezierPt(1 / 3 / kt, mtan.left[0], lq);
- Read upRead up
- Exclude checks
Rule: prefer-const
Requires that variable declarations use const
instead of let
and var
if possible.
If a variable is only assigned to once when it is declared, it should be declared using 'const'
Notes
- Has Fix
Config
An optional object containing the property "destructuring" with two possible values:
- "any" (default) - If any variable in destructuring can be const, this rule warns for those variables.
- "all" - Only warns if all variables in destructuring can be const.
Examples
"prefer-const": true
"prefer-const": true,[object Object]
Schema
{
"type": "object",
"properties": {
"destructuring": {
"type": "string",
"enum": [
"all",
"any"
]
}
}
}
For more information see this page.
Forbidden 'var' keyword, use 'let' or 'const' instead Open
var qb = rotation(angle(b, ctan.right[1]), angle(b, ctan.left[1]));
- Read upRead up
- Exclude checks
Rule: no-var-keyword
Disallows usage of the var
keyword.
Use let
or const
instead.
Rationale
Declaring variables using var
has several edge case behaviors that make var
unsuitable for modern code.
Variables declared by var
have their parent function block as their scope, ignoring other control flow statements.
var
s have declaration "hoisting" (similar to function
s) and can appear to be used before declaration.
Variables declared by const
and let
instead have as their scope the block in which they are defined,
and are not allowed to used before declaration or be re-declared with another const
or let
.
Notes
- Has Fix
Config
Not configurable.
Examples
"no-var-keyword": true
For more information see this page.
Identifier 'aleft' is never reassigned; use 'const' instead of 'var'. Open
var aleft = (ma - Math.PI / 2 + ta);
- Read upRead up
- Exclude checks
Rule: prefer-const
Requires that variable declarations use const
instead of let
and var
if possible.
If a variable is only assigned to once when it is declared, it should be declared using 'const'
Notes
- Has Fix
Config
An optional object containing the property "destructuring" with two possible values:
- "any" (default) - If any variable in destructuring can be const, this rule warns for those variables.
- "all" - Only warns if all variables in destructuring can be const.
Examples
"prefer-const": true
"prefer-const": true,[object Object]
Schema
{
"type": "object",
"properties": {
"destructuring": {
"type": "string",
"enum": [
"all",
"any"
]
}
}
}
For more information see this page.
Forbidden 'var' keyword, use 'let' or 'const' instead Open
for (var i = 3; i < points.length; i += 3) {
- Read upRead up
- Exclude checks
Rule: no-var-keyword
Disallows usage of the var
keyword.
Use let
or const
instead.
Rationale
Declaring variables using var
has several edge case behaviors that make var
unsuitable for modern code.
Variables declared by var
have their parent function block as their scope, ignoring other control flow statements.
var
s have declaration "hoisting" (similar to function
s) and can appear to be used before declaration.
Variables declared by const
and let
instead have as their scope the block in which they are defined,
and are not allowed to used before declaration or be re-declared with another const
or let
.
Notes
- Has Fix
Config
Not configurable.
Examples
"no-var-keyword": true
For more information see this page.
Forbidden 'var' keyword, use 'let' or 'const' instead Open
var aright = (ma + Math.PI / 2 - ta);
- Read upRead up
- Exclude checks
Rule: no-var-keyword
Disallows usage of the var
keyword.
Use let
or const
instead.
Rationale
Declaring variables using var
has several edge case behaviors that make var
unsuitable for modern code.
Variables declared by var
have their parent function block as their scope, ignoring other control flow statements.
var
s have declaration "hoisting" (similar to function
s) and can appear to be used before declaration.
Variables declared by const
and let
instead have as their scope the block in which they are defined,
and are not allowed to used before declaration or be re-declared with another const
or let
.
Notes
- Has Fix
Config
Not configurable.
Examples
"no-var-keyword": true
For more information see this page.
Identifier 'ta' is never reassigned; use 'const' instead of 'var'. Open
var ta = Math.asin((a.size - b.size) / d / 2);
- Read upRead up
- Exclude checks
Rule: prefer-const
Requires that variable declarations use const
instead of let
and var
if possible.
If a variable is only assigned to once when it is declared, it should be declared using 'const'
Notes
- Has Fix
Config
An optional object containing the property "destructuring" with two possible values:
- "any" (default) - If any variable in destructuring can be const, this rule warns for those variables.
- "all" - Only warns if all variables in destructuring can be const.
Examples
"prefer-const": true
"prefer-const": true,[object Object]
Schema
{
"type": "object",
"properties": {
"destructuring": {
"type": "string",
"enum": [
"all",
"any"
]
}
}
}
For more information see this page.
Identifier 'rq' is never reassigned; use 'const' instead of 'var'. Open
var rq = approximateQuadCurve(...rpoints)[1];
- Read upRead up
- Exclude checks
Rule: prefer-const
Requires that variable declarations use const
instead of let
and var
if possible.
If a variable is only assigned to once when it is declared, it should be declared using 'const'
Notes
- Has Fix
Config
An optional object containing the property "destructuring" with two possible values:
- "any" (default) - If any variable in destructuring can be const, this rule warns for those variables.
- "all" - Only warns if all variables in destructuring can be const.
Examples
"prefer-const": true
"prefer-const": true,[object Object]
Schema
{
"type": "object",
"properties": {
"destructuring": {
"type": "string",
"enum": [
"all",
"any"
]
}
}
}
For more information see this page.
Forbidden 'var' keyword, use 'let' or 'const' instead Open
var segments = [];
- Read upRead up
- Exclude checks
Rule: no-var-keyword
Disallows usage of the var
keyword.
Use let
or const
instead.
Rationale
Declaring variables using var
has several edge case behaviors that make var
unsuitable for modern code.
Variables declared by var
have their parent function block as their scope, ignoring other control flow statements.
var
s have declaration "hoisting" (similar to function
s) and can appear to be used before declaration.
Variables declared by const
and let
instead have as their scope the block in which they are defined,
and are not allowed to used before declaration or be re-declared with another const
or let
.
Notes
- Has Fix
Config
Not configurable.
Examples
"no-var-keyword": true
For more information see this page.
Forbidden 'var' keyword, use 'let' or 'const' instead Open
var curve = (isEnd ? [b, cb, ca, a] : [a, ca, cb, b]);
- Read upRead up
- Exclude checks
Rule: no-var-keyword
Disallows usage of the var
keyword.
Use let
or const
instead.
Rationale
Declaring variables using var
has several edge case behaviors that make var
unsuitable for modern code.
Variables declared by var
have their parent function block as their scope, ignoring other control flow statements.
var
s have declaration "hoisting" (similar to function
s) and can appear to be used before declaration.
Variables declared by const
and let
instead have as their scope the block in which they are defined,
and are not allowed to used before declaration or be re-declared with another const
or let
.
Notes
- Has Fix
Config
Not configurable.
Examples
"no-var-keyword": true
For more information see this page.
Identifier 'segments' is never reassigned; use 'const' instead of 'var'. Open
var segments = [];
- Read upRead up
- Exclude checks
Rule: prefer-const
Requires that variable declarations use const
instead of let
and var
if possible.
If a variable is only assigned to once when it is declared, it should be declared using 'const'
Notes
- Has Fix
Config
An optional object containing the property "destructuring" with two possible values:
- "any" (default) - If any variable in destructuring can be const, this rule warns for those variables.
- "all" - Only warns if all variables in destructuring can be const.
Examples
"prefer-const": true
"prefer-const": true,[object Object]
Schema
{
"type": "object",
"properties": {
"destructuring": {
"type": "string",
"enum": [
"all",
"any"
]
}
}
}
For more information see this page.
Identifier 'tan' is never reassigned; use 'const' instead of 'var'. Open
var tan = getCirclesTangents(a, b);
- Read upRead up
- Exclude checks
Rule: prefer-const
Requires that variable declarations use const
instead of let
and var
if possible.
If a variable is only assigned to once when it is declared, it should be declared using 'const'
Notes
- Has Fix
Config
An optional object containing the property "destructuring" with two possible values:
- "any" (default) - If any variable in destructuring can be const, this rule warns for those variables.
- "all" - Only warns if all variables in destructuring can be const.
Examples
"prefer-const": true
"prefer-const": true,[object Object]
Schema
{
"type": "object",
"properties": {
"destructuring": {
"type": "string",
"enum": [
"all",
"any"
]
}
}
}
For more information see this page.
Identifier 'curve' is never reassigned; use 'const' instead of 'var'. Open
var curve = (isEnd ? [b, cb, ca, a] : [a, ca, cb, b]);
- Read upRead up
- Exclude checks
Rule: prefer-const
Requires that variable declarations use const
instead of let
and var
if possible.
If a variable is only assigned to once when it is declared, it should be declared using 'const'
Notes
- Has Fix
Config
An optional object containing the property "destructuring" with two possible values:
- "any" (default) - If any variable in destructuring can be const, this rule warns for those variables.
- "all" - Only warns if all variables in destructuring can be const.
Examples
"prefer-const": true
"prefer-const": true,[object Object]
Schema
{
"type": "object",
"properties": {
"destructuring": {
"type": "string",
"enum": [
"all",
"any"
]
}
}
}
For more information see this page.
Identifier 'getTangentsVectors' is never reassigned; use 'const' instead of 'var'. Open
var getTangentsVectors = (isEnd) => {
- Read upRead up
- Exclude checks
Rule: prefer-const
Requires that variable declarations use const
instead of let
and var
if possible.
If a variable is only assigned to once when it is declared, it should be declared using 'const'
Notes
- Has Fix
Config
An optional object containing the property "destructuring" with two possible values:
- "any" (default) - If any variable in destructuring can be const, this rule warns for those variables.
- "all" - Only warns if all variables in destructuring can be const.
Examples
"prefer-const": true
"prefer-const": true,[object Object]
Schema
{
"type": "object",
"properties": {
"destructuring": {
"type": "string",
"enum": [
"all",
"any"
]
}
}
}
For more information see this page.
Type assertion using the '<>' syntax is forbidden. Use the 'as' syntax instead. Open
(<Point>seg[3]).size = (p0.size * (1 - tl) + p1.size * tl);
- Read upRead up
- Exclude checks
Rule: no-angle-bracket-type-assertion
Requires the use of as Type
for type assertions instead of <Type>
.
Rationale
Both formats of type assertions have the same effect, but only as
type assertions
work in .tsx
files. This rule ensures that you have a consistent type assertion style
across your codebase.
Notes
- TypeScript Only
- Has Fix
Config
Not configurable.
Examples
"no-angle-bracket-type-assertion": true
For more information see this page.
Forbidden 'var' keyword, use 'let' or 'const' instead Open
var getTangentsVectors = (isEnd) => {
- Read upRead up
- Exclude checks
Rule: no-var-keyword
Disallows usage of the var
keyword.
Use let
or const
instead.
Rationale
Declaring variables using var
has several edge case behaviors that make var
unsuitable for modern code.
Variables declared by var
have their parent function block as their scope, ignoring other control flow statements.
var
s have declaration "hoisting" (similar to function
s) and can appear to be used before declaration.
Variables declared by const
and let
instead have as their scope the block in which they are defined,
and are not allowed to used before declaration or be re-declared with another const
or let
.
Notes
- Has Fix
Config
Not configurable.
Examples
"no-var-keyword": true
For more information see this page.
Forbidden 'var' keyword, use 'let' or 'const' instead Open
var rc = bezierPt(1 / 3 / kt, mtan.right[0], rq);
- Read upRead up
- Exclude checks
Rule: no-var-keyword
Disallows usage of the var
keyword.
Use let
or const
instead.
Rationale
Declaring variables using var
has several edge case behaviors that make var
unsuitable for modern code.
Variables declared by var
have their parent function block as their scope, ignoring other control flow statements.
var
s have declaration "hoisting" (similar to function
s) and can appear to be used before declaration.
Variables declared by const
and let
instead have as their scope the block in which they are defined,
and are not allowed to used before declaration or be re-declared with another const
or let
.
Notes
- Has Fix
Config
Not configurable.
Examples
"no-var-keyword": true
For more information see this page.
Identifier 'n' is never reassigned; use 'const' instead of 'var'. Open
var n = seg2[6];
- Read upRead up
- Exclude checks
Rule: prefer-const
Requires that variable declarations use const
instead of let
and var
if possible.
If a variable is only assigned to once when it is declared, it should be declared using 'const'
Notes
- Has Fix
Config
An optional object containing the property "destructuring" with two possible values:
- "any" (default) - If any variable in destructuring can be const, this rule warns for those variables.
- "all" - Only warns if all variables in destructuring can be const.
Examples
"prefer-const": true
"prefer-const": true,[object Object]
Schema
{
"type": "object",
"properties": {
"destructuring": {
"type": "string",
"enum": [
"all",
"any"
]
}
}
}
For more information see this page.
Identifier 'tend' is never reassigned; use 'const' instead of 'var'. Open
var tend = getTangentsVectors(true);
- Read upRead up
- Exclude checks
Rule: prefer-const
Requires that variable declarations use const
instead of let
and var
if possible.
If a variable is only assigned to once when it is declared, it should be declared using 'const'
Notes
- Has Fix
Config
An optional object containing the property "destructuring" with two possible values:
- "any" (default) - If any variable in destructuring can be const, this rule warns for those variables.
- "all" - Only warns if all variables in destructuring can be const.
Examples
"prefer-const": true
"prefer-const": true,[object Object]
Schema
{
"type": "object",
"properties": {
"destructuring": {
"type": "string",
"enum": [
"all",
"any"
]
}
}
}
For more information see this page.
Forbidden 'var' keyword, use 'let' or 'const' instead Open
var m = seg2[3];
- Read upRead up
- Exclude checks
Rule: no-var-keyword
Disallows usage of the var
keyword.
Use let
or const
instead.
Rationale
Declaring variables using var
has several edge case behaviors that make var
unsuitable for modern code.
Variables declared by var
have their parent function block as their scope, ignoring other control flow statements.
var
s have declaration "hoisting" (similar to function
s) and can appear to be used before declaration.
Variables declared by const
and let
instead have as their scope the block in which they are defined,
and are not allowed to used before declaration or be re-declared with another const
or let
.
Notes
- Has Fix
Config
Not configurable.
Examples
"no-var-keyword": true
For more information see this page.
Identifier 'qb' is never reassigned; use 'const' instead of 'var'. Open
var qb = rotation(angle(b, ctan.right[1]), angle(b, ctan.left[1]));
- Read upRead up
- Exclude checks
Rule: prefer-const
Requires that variable declarations use const
instead of let
and var
if possible.
If a variable is only assigned to once when it is declared, it should be declared using 'const'
Notes
- Has Fix
Config
An optional object containing the property "destructuring" with two possible values:
- "any" (default) - If any variable in destructuring can be const, this rule warns for those variables.
- "all" - Only warns if all variables in destructuring can be const.
Examples
"prefer-const": true
"prefer-const": true,[object Object]
Schema
{
"type": "object",
"properties": {
"destructuring": {
"type": "string",
"enum": [
"all",
"any"
]
}
}
}
For more information see this page.
Forbidden 'var' keyword, use 'let' or 'const' instead Open
var r = (pt.size / 2);
- Read upRead up
- Exclude checks
Rule: no-var-keyword
Disallows usage of the var
keyword.
Use let
or const
instead.
Rationale
Declaring variables using var
has several edge case behaviors that make var
unsuitable for modern code.
Variables declared by var
have their parent function block as their scope, ignoring other control flow statements.
var
s have declaration "hoisting" (similar to function
s) and can appear to be used before declaration.
Variables declared by const
and let
instead have as their scope the block in which they are defined,
and are not allowed to used before declaration or be re-declared with another const
or let
.
Notes
- Has Fix
Config
Not configurable.
Examples
"no-var-keyword": true
For more information see this page.
Forbidden 'var' keyword, use 'let' or 'const' instead Open
var seg2 = splitCurveSegment(0.5, ...seg1.slice(0, 4));
- Read upRead up
- Exclude checks
Rule: no-var-keyword
Disallows usage of the var
keyword.
Use let
or const
instead.
Rationale
Declaring variables using var
has several edge case behaviors that make var
unsuitable for modern code.
Variables declared by var
have their parent function block as their scope, ignoring other control flow statements.
var
s have declaration "hoisting" (similar to function
s) and can appear to be used before declaration.
Variables declared by const
and let
instead have as their scope the block in which they are defined,
and are not allowed to used before declaration or be re-declared with another const
or let
.
Notes
- Has Fix
Config
Not configurable.
Examples
"no-var-keyword": true
For more information see this page.
Forbidden 'var' keyword, use 'let' or 'const' instead Open
var m = bezierPt(dist(p0, p1) / dist(p0, p1, p2), p0, p2);
- Read upRead up
- Exclude checks
Rule: no-var-keyword
Disallows usage of the var
keyword.
Use let
or const
instead.
Rationale
Declaring variables using var
has several edge case behaviors that make var
unsuitable for modern code.
Variables declared by var
have their parent function block as their scope, ignoring other control flow statements.
var
s have declaration "hoisting" (similar to function
s) and can appear to be used before declaration.
Variables declared by const
and let
instead have as their scope the block in which they are defined,
and are not allowed to used before declaration or be re-declared with another const
or let
.
Notes
- Has Fix
Config
Not configurable.
Examples
"no-var-keyword": true
For more information see this page.
Forbidden 'var' keyword, use 'let' or 'const' instead Open
var tstart = getTangentsVectors(false);
- Read upRead up
- Exclude checks
Rule: no-var-keyword
Disallows usage of the var
keyword.
Use let
or const
instead.
Rationale
Declaring variables using var
has several edge case behaviors that make var
unsuitable for modern code.
Variables declared by var
have their parent function block as their scope, ignoring other control flow statements.
var
s have declaration "hoisting" (similar to function
s) and can appear to be used before declaration.
Variables declared by const
and let
instead have as their scope the block in which they are defined,
and are not allowed to used before declaration or be re-declared with another const
or let
.
Notes
- Has Fix
Config
Not configurable.
Examples
"no-var-keyword": true
For more information see this page.
Forbidden 'var' keyword, use 'let' or 'const' instead Open
var lc = bezierPt(1 / 3 / kt, mtan.left[0], lq);
- Read upRead up
- Exclude checks
Rule: no-var-keyword
Disallows usage of the var
keyword.
Use let
or const
instead.
Rationale
Declaring variables using var
has several edge case behaviors that make var
unsuitable for modern code.
Variables declared by var
have their parent function block as their scope, ignoring other control flow statements.
var
s have declaration "hoisting" (similar to function
s) and can appear to be used before declaration.
Variables declared by const
and let
instead have as their scope the block in which they are defined,
and are not allowed to used before declaration or be re-declared with another const
or let
.
Notes
- Has Fix
Config
Not configurable.
Examples
"no-var-keyword": true
For more information see this page.
Identifier 'segments' is never reassigned; use 'const' instead of 'var'. Open
var segments = [];
- Read upRead up
- Exclude checks
Rule: prefer-const
Requires that variable declarations use const
instead of let
and var
if possible.
If a variable is only assigned to once when it is declared, it should be declared using 'const'
Notes
- Has Fix
Config
An optional object containing the property "destructuring" with two possible values:
- "any" (default) - If any variable in destructuring can be const, this rule warns for those variables.
- "all" - Only warns if all variables in destructuring can be const.
Examples
"prefer-const": true
"prefer-const": true,[object Object]
Schema
{
"type": "object",
"properties": {
"destructuring": {
"type": "string",
"enum": [
"all",
"any"
]
}
}
}
For more information see this page.
Identifier 'm' is never reassigned; use 'const' instead of 'var'. Open
var m = bezierPt(dist(p0, p1) / dist(p0, p1, p2), p0, p2);
- Read upRead up
- Exclude checks
Rule: prefer-const
Requires that variable declarations use const
instead of let
and var
if possible.
If a variable is only assigned to once when it is declared, it should be declared using 'const'
Notes
- Has Fix
Config
An optional object containing the property "destructuring" with two possible values:
- "any" (default) - If any variable in destructuring can be const, this rule warns for those variables.
- "all" - Only warns if all variables in destructuring can be const.
Examples
"prefer-const": true
"prefer-const": true,[object Object]
Schema
{
"type": "object",
"properties": {
"destructuring": {
"type": "string",
"enum": [
"all",
"any"
]
}
}
}
For more information see this page.
Identifier 'seg2' is never reassigned; use 'const' instead of 'var'. Open
var seg2 = splitCurveSegment(0.5, ...seg1.slice(0, 4));
- Read upRead up
- Exclude checks
Rule: prefer-const
Requires that variable declarations use const
instead of let
and var
if possible.
If a variable is only assigned to once when it is declared, it should be declared using 'const'
Notes
- Has Fix
Config
An optional object containing the property "destructuring" with two possible values:
- "any" (default) - If any variable in destructuring can be const, this rule warns for those variables.
- "all" - Only warns if all variables in destructuring can be const.
Examples
"prefer-const": true
"prefer-const": true,[object Object]
Schema
{
"type": "object",
"properties": {
"destructuring": {
"type": "string",
"enum": [
"all",
"any"
]
}
}
}
For more information see this page.
Identifier 'lpoints' is never reassigned; use 'const' instead of 'var'. Open
var lpoints = [
- Read upRead up
- Exclude checks
Rule: prefer-const
Requires that variable declarations use const
instead of let
and var
if possible.
If a variable is only assigned to once when it is declared, it should be declared using 'const'
Notes
- Has Fix
Config
An optional object containing the property "destructuring" with two possible values:
- "any" (default) - If any variable in destructuring can be const, this rule warns for those variables.
- "all" - Only warns if all variables in destructuring can be const.
Examples
"prefer-const": true
"prefer-const": true,[object Object]
Schema
{
"type": "object",
"properties": {
"destructuring": {
"type": "string",
"enum": [
"all",
"any"
]
}
}
}
For more information see this page.
Identifier 'mtan' is never reassigned; use 'const' instead of 'var'. Open
var mtan = getCirclesTangents(curve[0], m);
- Read upRead up
- Exclude checks
Rule: prefer-const
Requires that variable declarations use const
instead of let
and var
if possible.
If a variable is only assigned to once when it is declared, it should be declared using 'const'
Notes
- Has Fix
Config
An optional object containing the property "destructuring" with two possible values:
- "any" (default) - If any variable in destructuring can be const, this rule warns for those variables.
- "all" - Only warns if all variables in destructuring can be const.
Examples
"prefer-const": true
"prefer-const": true,[object Object]
Schema
{
"type": "object",
"properties": {
"destructuring": {
"type": "string",
"enum": [
"all",
"any"
]
}
}
}
For more information see this page.