TracksApp/tracks

Flog calculates the ABC score for methods. The ABC score is based on assignments, branches (method calls), and conditions.

You can read more about ABC metrics or the flog tool

Flog calculates the ABC score for methods. The ABC score is based on assignments, branches (method calls), and conditions.

You can read more about ABC metrics or the flog tool

Flog calculates the ABC score for methods. The ABC score is based on assignments, branches (method calls), and conditions.

You can read more about ABC metrics or the flog tool

Flog calculates the ABC score for methods. The ABC score is based on assignments, branches (method calls), and conditions.

You can read more about ABC metrics or the flog tool

Flog calculates the ABC score for methods. The ABC score is based on assignments, branches (method calls), and conditions.

You can read more about ABC metrics or the flog tool

A method with Too Many Statements is any method that has a large number of lines.

Too Many Statements warns about any method that has more than 5 statements. Reek's smell detector for Too Many Statements counts +1 for every simple statement in a method and +1 for every statement within a control structure (if, else, case, when, for, while, until, begin, rescue) but it doesn't count the control structure itself.

So the following method would score +6 in Reek's statement-counting algorithm:

def parse(arg, argv, &error)
  if !(val = arg) and (argv.empty? or /\A-/ =~ (val = argv[0]))
    return nil, block, nil                                         # +1
  end
  opt = (val = parse_arg(val, &error))[1]                          # +2
  val = conv_arg(*val)                                             # +3
  if opt and !arg
    argv.shift                                                     # +4
  else
    val[0] = nil                                                   # +5
  end
  val                                                              # +6
end

(You might argue that the two assigments within the first @if@ should count as statements, and that perhaps the nested assignment should count as +2.)

A method with Too Many Statements is any method that has a large number of lines.

Too Many Statements warns about any method that has more than 5 statements. Reek's smell detector for Too Many Statements counts +1 for every simple statement in a method and +1 for every statement within a control structure (if, else, case, when, for, while, until, begin, rescue) but it doesn't count the control structure itself.

So the following method would score +6 in Reek's statement-counting algorithm:

def parse(arg, argv, &error)
  if !(val = arg) and (argv.empty? or /\A-/ =~ (val = argv[0]))
    return nil, block, nil                                         # +1
  end
  opt = (val = parse_arg(val, &error))[1]                          # +2
  val = conv_arg(*val)                                             # +3
  if opt and !arg
    argv.shift                                                     # +4
  else
    val[0] = nil                                                   # +5
  end
  val                                                              # +6
end

(You might argue that the two assigments within the first @if@ should count as statements, and that perhaps the nested assignment should count as +2.)

A method with Too Many Statements is any method that has a large number of lines.

Too Many Statements warns about any method that has more than 5 statements. Reek's smell detector for Too Many Statements counts +1 for every simple statement in a method and +1 for every statement within a control structure (if, else, case, when, for, while, until, begin, rescue) but it doesn't count the control structure itself.

So the following method would score +6 in Reek's statement-counting algorithm:

def parse(arg, argv, &error)
  if !(val = arg) and (argv.empty? or /\A-/ =~ (val = argv[0]))
    return nil, block, nil                                         # +1
  end
  opt = (val = parse_arg(val, &error))[1]                          # +2
  val = conv_arg(*val)                                             # +3
  if opt and !arg
    argv.shift                                                     # +4
  else
    val[0] = nil                                                   # +5
  end
  val                                                              # +6
end

(You might argue that the two assigments within the first @if@ should count as statements, and that perhaps the nested assignment should count as +2.)

A method with Too Many Statements is any method that has a large number of lines.

Too Many Statements warns about any method that has more than 5 statements. Reek's smell detector for Too Many Statements counts +1 for every simple statement in a method and +1 for every statement within a control structure (if, else, case, when, for, while, until, begin, rescue) but it doesn't count the control structure itself.

So the following method would score +6 in Reek's statement-counting algorithm:

def parse(arg, argv, &error)
  if !(val = arg) and (argv.empty? or /\A-/ =~ (val = argv[0]))
    return nil, block, nil                                         # +1
  end
  opt = (val = parse_arg(val, &error))[1]                          # +2
  val = conv_arg(*val)                                             # +3
  if opt and !arg
    argv.shift                                                     # +4
  else
    val[0] = nil                                                   # +5
  end
  val                                                              # +6
end

(You might argue that the two assigments within the first @if@ should count as statements, and that perhaps the nested assignment should count as +2.)

A method with Too Many Statements is any method that has a large number of lines.

Too Many Statements warns about any method that has more than 5 statements. Reek's smell detector for Too Many Statements counts +1 for every simple statement in a method and +1 for every statement within a control structure (if, else, case, when, for, while, until, begin, rescue) but it doesn't count the control structure itself.

So the following method would score +6 in Reek's statement-counting algorithm:

def parse(arg, argv, &error)
  if !(val = arg) and (argv.empty? or /\A-/ =~ (val = argv[0]))
    return nil, block, nil                                         # +1
  end
  opt = (val = parse_arg(val, &error))[1]                          # +2
  val = conv_arg(*val)                                             # +3
  if opt and !arg
    argv.shift                                                     # +4
  else
    val[0] = nil                                                   # +5
  end
  val                                                              # +6
end

(You might argue that the two assigments within the first @if@ should count as statements, and that perhaps the nested assignment should count as +2.)

A method with Too Many Statements is any method that has a large number of lines.

Too Many Statements warns about any method that has more than 5 statements. Reek's smell detector for Too Many Statements counts +1 for every simple statement in a method and +1 for every statement within a control structure (if, else, case, when, for, while, until, begin, rescue) but it doesn't count the control structure itself.

So the following method would score +6 in Reek's statement-counting algorithm:

def parse(arg, argv, &error)
  if !(val = arg) and (argv.empty? or /\A-/ =~ (val = argv[0]))
    return nil, block, nil                                         # +1
  end
  opt = (val = parse_arg(val, &error))[1]                          # +2
  val = conv_arg(*val)                                             # +3
  if opt and !arg
    argv.shift                                                     # +4
  else
    val[0] = nil                                                   # +5
  end
  val                                                              # +6
end

(You might argue that the two assigments within the first @if@ should count as statements, and that perhaps the nested assignment should count as +2.)

Control Parameter is a special case of Control Couple

Example

A simple example would be the "quoted" parameter in the following method:

def write(quoted)
  if quoted
    write_quoted @value
  else
    write_unquoted @value
  end
end

Fixing those problems is out of the scope of this document but an easy solution could be to remove the "write" method alltogether and to move the calls to "writequoted" / "writeunquoted" in the initial caller of "write".

A Nested Iterator occurs when a block contains another block.

Example

Given

class Duck
  class << self
    def duck_names
      %i!tick trick track!.each do |surname|
        %i!duck!.each do |last_name|
          puts "full name is #{surname} #{last_name}"
        end
      end
    end
  end
end

Reek would report the following warning:

test.rb -- 1 warning:
  [5]:Duck#duck_names contains iterators nested 2 deep (NestedIterators)

A method with Too Many Statements is any method that has a large number of lines.

Too Many Statements warns about any method that has more than 5 statements. Reek's smell detector for Too Many Statements counts +1 for every simple statement in a method and +1 for every statement within a control structure (if, else, case, when, for, while, until, begin, rescue) but it doesn't count the control structure itself.

So the following method would score +6 in Reek's statement-counting algorithm:

def parse(arg, argv, &error)
  if !(val = arg) and (argv.empty? or /\A-/ =~ (val = argv[0]))
    return nil, block, nil                                         # +1
  end
  opt = (val = parse_arg(val, &error))[1]                          # +2
  val = conv_arg(*val)                                             # +3
  if opt and !arg
    argv.shift                                                     # +4
  else
    val[0] = nil                                                   # +5
  end
  val                                                              # +6
end

(You might argue that the two assigments within the first @if@ should count as statements, and that perhaps the nested assignment should count as +2.)

A method with Too Many Statements is any method that has a large number of lines.

Too Many Statements warns about any method that has more than 5 statements. Reek's smell detector for Too Many Statements counts +1 for every simple statement in a method and +1 for every statement within a control structure (if, else, case, when, for, while, until, begin, rescue) but it doesn't count the control structure itself.

So the following method would score +6 in Reek's statement-counting algorithm:

def parse(arg, argv, &error)
  if !(val = arg) and (argv.empty? or /\A-/ =~ (val = argv[0]))
    return nil, block, nil                                         # +1
  end
  opt = (val = parse_arg(val, &error))[1]                          # +2
  val = conv_arg(*val)                                             # +3
  if opt and !arg
    argv.shift                                                     # +4
  else
    val[0] = nil                                                   # +5
  end
  val                                                              # +6
end

(You might argue that the two assigments within the first @if@ should count as statements, and that perhaps the nested assignment should count as +2.)

A method with Too Many Statements is any method that has a large number of lines.

Too Many Statements warns about any method that has more than 5 statements. Reek's smell detector for Too Many Statements counts +1 for every simple statement in a method and +1 for every statement within a control structure (if, else, case, when, for, while, until, begin, rescue) but it doesn't count the control structure itself.

So the following method would score +6 in Reek's statement-counting algorithm:

def parse(arg, argv, &error)
  if !(val = arg) and (argv.empty? or /\A-/ =~ (val = argv[0]))
    return nil, block, nil                                         # +1
  end
  opt = (val = parse_arg(val, &error))[1]                          # +2
  val = conv_arg(*val)                                             # +3
  if opt and !arg
    argv.shift                                                     # +4
  else
    val[0] = nil                                                   # +5
  end
  val                                                              # +6
end

(You might argue that the two assigments within the first @if@ should count as statements, and that perhaps the nested assignment should count as +2.)

Too Many Instance Variables is a special case of LargeClass.

Example

Given this configuration

TooManyInstanceVariables:
  max_instance_variables: 3

and this code:

class TooManyInstanceVariables
  def initialize
    @arg_1 = :dummy
    @arg_2 = :dummy
    @arg_3 = :dummy
    @arg_4 = :dummy
  end
end

Reek would emit the following warning:

test.rb -- 5 warnings:
  [1]:TooManyInstanceVariables has at least 4 instance variables (TooManyInstanceVariables)

A method with Too Many Statements is any method that has a large number of lines.

Too Many Statements warns about any method that has more than 5 statements. Reek's smell detector for Too Many Statements counts +1 for every simple statement in a method and +1 for every statement within a control structure (if, else, case, when, for, while, until, begin, rescue) but it doesn't count the control structure itself.

So the following method would score +6 in Reek's statement-counting algorithm:

def parse(arg, argv, &error)
  if !(val = arg) and (argv.empty? or /\A-/ =~ (val = argv[0]))
    return nil, block, nil                                         # +1
  end
  opt = (val = parse_arg(val, &error))[1]                          # +2
  val = conv_arg(*val)                                             # +3
  if opt and !arg
    argv.shift                                                     # +4
  else
    val[0] = nil                                                   # +5
  end
  val                                                              # +6
end

(You might argue that the two assigments within the first @if@ should count as statements, and that perhaps the nested assignment should count as +2.)

A method with Too Many Statements is any method that has a large number of lines.

Too Many Statements warns about any method that has more than 5 statements. Reek's smell detector for Too Many Statements counts +1 for every simple statement in a method and +1 for every statement within a control structure (if, else, case, when, for, while, until, begin, rescue) but it doesn't count the control structure itself.

So the following method would score +6 in Reek's statement-counting algorithm:

def parse(arg, argv, &error)
  if !(val = arg) and (argv.empty? or /\A-/ =~ (val = argv[0]))
    return nil, block, nil                                         # +1
  end
  opt = (val = parse_arg(val, &error))[1]                          # +2
  val = conv_arg(*val)                                             # +3
  if opt and !arg
    argv.shift                                                     # +4
  else
    val[0] = nil                                                   # +5
  end
  val                                                              # +6
end

(You might argue that the two assigments within the first @if@ should count as statements, and that perhaps the nested assignment should count as +2.)

Too Many Methods is a special case of LargeClass.

Example

Given this configuration

TooManyMethods:
  max_methods: 3

and this code:

class TooManyMethods
  def one; end
  def two; end
  def three; end
  def four; end
end

Reek would emit the following warning:

test.rb -- 1 warning:
  [1]:TooManyMethods has at least 4 methods (TooManyMethods)

Classes should not assume that instance variables are set or present outside of the current class definition.

Good:

class Foo
  def initialize
    @bar = :foo
  end

  def foo?
    @bar == :foo
  end
end

Good as well:

class Foo
  def foo?
    bar == :foo
  end

  def bar
    @bar ||= :foo
  end
end

Bad:

class Foo
  def go_foo!
    @bar = :foo
  end

  def foo?
    @bar == :foo
  end
end

Example

Running Reek on:

class Dummy
  def test
    @ivar
  end
end

would report:

[1]:InstanceVariableAssumption: Dummy assumes too much for instance variable @ivar

Note that this example would trigger this smell warning as well:

class Parent
  def initialize(omg)
    @omg = omg
  end
end

class Child < Parent
  def foo
    @omg
  end
end

The way to address the smell warning is that you should create an attr_reader to use @omg in the subclass and not access @omg directly like this:

class Parent
  attr_reader :omg

  def initialize(omg)
    @omg = omg
  end
end

class Child < Parent
  def foo
    omg
  end
end

Directly accessing instance variables is considered a smell because it breaks encapsulation and makes it harder to reason about code.

If you don't want to expose those methods as public API just make them private like this:

class Parent
  def initialize(omg)
    @omg = omg
  end

  private
  attr_reader :omg
end

class Child < Parent
  def foo
    omg
  end
end

Current Support in Reek

An instance variable must:

• be set in the constructor
• or be accessed through a method with lazy initialization / memoization.

If not, Instance Variable Assumption will be reported.

Classes should not assume that instance variables are set or present outside of the current class definition.

Good:

class Foo
  def initialize
    @bar = :foo
  end

  def foo?
    @bar == :foo
  end
end

Good as well:

class Foo
  def foo?
    bar == :foo
  end

  def bar
    @bar ||= :foo
  end
end

Bad:

class Foo
  def go_foo!
    @bar = :foo
  end

  def foo?
    @bar == :foo
  end
end

Example

Running Reek on:

class Dummy
  def test
    @ivar
  end
end

would report:

[1]:InstanceVariableAssumption: Dummy assumes too much for instance variable @ivar

Note that this example would trigger this smell warning as well:

class Parent
  def initialize(omg)
    @omg = omg
  end
end

class Child < Parent
  def foo
    @omg
  end
end

The way to address the smell warning is that you should create an attr_reader to use @omg in the subclass and not access @omg directly like this:

class Parent
  attr_reader :omg

  def initialize(omg)
    @omg = omg
  end
end

class Child < Parent
  def foo
    omg
  end
end

Directly accessing instance variables is considered a smell because it breaks encapsulation and makes it harder to reason about code.

If you don't want to expose those methods as public API just make them private like this:

class Parent
  def initialize(omg)
    @omg = omg
  end

  private
  attr_reader :omg
end

class Child < Parent
  def foo
    omg
  end
end

Current Support in Reek

An instance variable must:

• be set in the constructor
• or be accessed through a method with lazy initialization / memoization.

If not, Instance Variable Assumption will be reported.

Duplication occurs when two fragments of code look nearly identical, or when two fragments of code have nearly identical effects at some conceptual level.

Reek implements a check for Duplicate Method Call.

Example

Here's a very much simplified and contrived example. The following method will report a warning:

def double_thing()
  @other.thing + @other.thing
end

One quick approach to silence Reek would be to refactor the code thus:

def double_thing()
  thing = @other.thing
  thing + thing
end

A slightly different approach would be to replace all calls of double_thing by calls to @other.double_thing:

class Other
  def double_thing()
    thing + thing
  end
end

The approach you take will depend on balancing other factors in your code.

Duplication occurs when two fragments of code look nearly identical, or when two fragments of code have nearly identical effects at some conceptual level.

Reek implements a check for Duplicate Method Call.

Example

Here's a very much simplified and contrived example. The following method will report a warning:

def double_thing()
  @other.thing + @other.thing
end

One quick approach to silence Reek would be to refactor the code thus:

def double_thing()
  thing = @other.thing
  thing + thing
end

A slightly different approach would be to replace all calls of double_thing by calls to @other.double_thing:

class Other
  def double_thing()
    thing + thing
  end
end

The approach you take will depend on balancing other factors in your code.

Classes should not assume that instance variables are set or present outside of the current class definition.

Good:

class Foo
  def initialize
    @bar = :foo
  end

  def foo?
    @bar == :foo
  end
end

Good as well:

class Foo
  def foo?
    bar == :foo
  end

  def bar
    @bar ||= :foo
  end
end

Bad:

class Foo
  def go_foo!
    @bar = :foo
  end

  def foo?
    @bar == :foo
  end
end

Example

Running Reek on:

class Dummy
  def test
    @ivar
  end
end

would report:

[1]:InstanceVariableAssumption: Dummy assumes too much for instance variable @ivar

Note that this example would trigger this smell warning as well:

class Parent
  def initialize(omg)
    @omg = omg
  end
end

class Child < Parent
  def foo
    @omg
  end
end

The way to address the smell warning is that you should create an attr_reader to use @omg in the subclass and not access @omg directly like this:

class Parent
  attr_reader :omg

  def initialize(omg)
    @omg = omg
  end
end

class Child < Parent
  def foo
    omg
  end
end

Directly accessing instance variables is considered a smell because it breaks encapsulation and makes it harder to reason about code.

If you don't want to expose those methods as public API just make them private like this:

class Parent
  def initialize(omg)
    @omg = omg
  end

  private
  attr_reader :omg
end

class Child < Parent
  def foo
    omg
  end
end

Current Support in Reek

An instance variable must:

• be set in the constructor
• or be accessed through a method with lazy initialization / memoization.

If not, Instance Variable Assumption will be reported.

Duplication occurs when two fragments of code look nearly identical, or when two fragments of code have nearly identical effects at some conceptual level.

Reek implements a check for Duplicate Method Call.

Example

Here's a very much simplified and contrived example. The following method will report a warning:

def double_thing()
  @other.thing + @other.thing
end

One quick approach to silence Reek would be to refactor the code thus:

def double_thing()
  thing = @other.thing
  thing + thing
end

A slightly different approach would be to replace all calls of double_thing by calls to @other.double_thing:

class Other
  def double_thing()
    thing + thing
  end
end

The approach you take will depend on balancing other factors in your code.

Duplication occurs when two fragments of code look nearly identical, or when two fragments of code have nearly identical effects at some conceptual level.

Reek implements a check for Duplicate Method Call.

Example

Here's a very much simplified and contrived example. The following method will report a warning:

def double_thing()
  @other.thing + @other.thing
end

One quick approach to silence Reek would be to refactor the code thus:

def double_thing()
  thing = @other.thing
  thing + thing
end

A slightly different approach would be to replace all calls of double_thing by calls to @other.double_thing:

class Other
  def double_thing()
    thing + thing
  end
end

The approach you take will depend on balancing other factors in your code.

Classes should not assume that instance variables are set or present outside of the current class definition.

Good:

class Foo
  def initialize
    @bar = :foo
  end

  def foo?
    @bar == :foo
  end
end

Good as well:

class Foo
  def foo?
    bar == :foo
  end

  def bar
    @bar ||= :foo
  end
end

Bad:

class Foo
  def go_foo!
    @bar = :foo
  end

  def foo?
    @bar == :foo
  end
end

Example

Running Reek on:

class Dummy
  def test
    @ivar
  end
end

would report:

[1]:InstanceVariableAssumption: Dummy assumes too much for instance variable @ivar

Note that this example would trigger this smell warning as well:

class Parent
  def initialize(omg)
    @omg = omg
  end
end

class Child < Parent
  def foo
    @omg
  end
end

The way to address the smell warning is that you should create an attr_reader to use @omg in the subclass and not access @omg directly like this:

class Parent
  attr_reader :omg

  def initialize(omg)
    @omg = omg
  end
end

class Child < Parent
  def foo
    omg
  end
end

Directly accessing instance variables is considered a smell because it breaks encapsulation and makes it harder to reason about code.

If you don't want to expose those methods as public API just make them private like this:

class Parent
  def initialize(omg)
    @omg = omg
  end

  private
  attr_reader :omg
end

class Child < Parent
  def foo
    omg
  end
end

Current Support in Reek

An instance variable must:

• be set in the constructor
• or be accessed through a method with lazy initialization / memoization.

If not, Instance Variable Assumption will be reported.

Classes should not assume that instance variables are set or present outside of the current class definition.

Good:

class Foo
  def initialize
    @bar = :foo
  end

  def foo?
    @bar == :foo
  end
end

Good as well:

class Foo
  def foo?
    bar == :foo
  end

  def bar
    @bar ||= :foo
  end
end

Bad:

class Foo
  def go_foo!
    @bar = :foo
  end

  def foo?
    @bar == :foo
  end
end

Example

Running Reek on:

class Dummy
  def test
    @ivar
  end
end

would report:

[1]:InstanceVariableAssumption: Dummy assumes too much for instance variable @ivar

Note that this example would trigger this smell warning as well:

class Parent
  def initialize(omg)
    @omg = omg
  end
end

class Child < Parent
  def foo
    @omg
  end
end

The way to address the smell warning is that you should create an attr_reader to use @omg in the subclass and not access @omg directly like this:

class Parent
  attr_reader :omg

  def initialize(omg)
    @omg = omg
  end
end

class Child < Parent
  def foo
    omg
  end
end

Directly accessing instance variables is considered a smell because it breaks encapsulation and makes it harder to reason about code.

If you don't want to expose those methods as public API just make them private like this:

class Parent
  def initialize(omg)
    @omg = omg
  end

  private
  attr_reader :omg
end

class Child < Parent
  def foo
    omg
  end
end

Current Support in Reek

An instance variable must:

• be set in the constructor
• or be accessed through a method with lazy initialization / memoization.

If not, Instance Variable Assumption will be reported.

Classes should not assume that instance variables are set or present outside of the current class definition.

Good:

class Foo
  def initialize
    @bar = :foo
  end

  def foo?
    @bar == :foo
  end
end

Good as well:

class Foo
  def foo?
    bar == :foo
  end

  def bar
    @bar ||= :foo
  end
end

Bad:

class Foo
  def go_foo!
    @bar = :foo
  end

  def foo?
    @bar == :foo
  end
end

Example

Running Reek on:

class Dummy
  def test
    @ivar
  end
end

would report:

[1]:InstanceVariableAssumption: Dummy assumes too much for instance variable @ivar

Note that this example would trigger this smell warning as well:

class Parent
  def initialize(omg)
    @omg = omg
  end
end

class Child < Parent
  def foo
    @omg
  end
end

The way to address the smell warning is that you should create an attr_reader to use @omg in the subclass and not access @omg directly like this:

class Parent
  attr_reader :omg

  def initialize(omg)
    @omg = omg
  end
end

class Child < Parent
  def foo
    omg
  end
end

Directly accessing instance variables is considered a smell because it breaks encapsulation and makes it harder to reason about code.

If you don't want to expose those methods as public API just make them private like this:

class Parent
  def initialize(omg)
    @omg = omg
  end

  private
  attr_reader :omg
end

class Child < Parent
  def foo
    omg
  end
end

Current Support in Reek

An instance variable must:

• be set in the constructor
• or be accessed through a method with lazy initialization / memoization.

If not, Instance Variable Assumption will be reported.

Classes should not assume that instance variables are set or present outside of the current class definition.

Good:

class Foo
  def initialize
    @bar = :foo
  end

  def foo?
    @bar == :foo
  end
end

Good as well:

class Foo
  def foo?
    bar == :foo
  end

  def bar
    @bar ||= :foo
  end
end

Bad:

class Foo
  def go_foo!
    @bar = :foo
  end

  def foo?
    @bar == :foo
  end
end

Example

Running Reek on:

class Dummy
  def test
    @ivar
  end
end

would report:

[1]:InstanceVariableAssumption: Dummy assumes too much for instance variable @ivar

Note that this example would trigger this smell warning as well:

class Parent
  def initialize(omg)
    @omg = omg
  end
end

class Child < Parent
  def foo
    @omg
  end
end

The way to address the smell warning is that you should create an attr_reader to use @omg in the subclass and not access @omg directly like this:

class Parent
  attr_reader :omg

  def initialize(omg)
    @omg = omg
  end
end

class Child < Parent
  def foo
    omg
  end
end

Directly accessing instance variables is considered a smell because it breaks encapsulation and makes it harder to reason about code.

If you don't want to expose those methods as public API just make them private like this:

class Parent
  def initialize(omg)
    @omg = omg
  end

  private
  attr_reader :omg
end

class Child < Parent
  def foo
    omg
  end
end

Current Support in Reek

An instance variable must:

• be set in the constructor
• or be accessed through a method with lazy initialization / memoization.

If not, Instance Variable Assumption will be reported.

Classes should not assume that instance variables are set or present outside of the current class definition.

Good:

class Foo
  def initialize
    @bar = :foo
  end

  def foo?
    @bar == :foo
  end
end

Good as well:

class Foo
  def foo?
    bar == :foo
  end

  def bar
    @bar ||= :foo
  end
end

Bad:

class Foo
  def go_foo!
    @bar = :foo
  end

  def foo?
    @bar == :foo
  end
end

Example

Running Reek on:

class Dummy
  def test
    @ivar
  end
end

would report:

[1]:InstanceVariableAssumption: Dummy assumes too much for instance variable @ivar

Note that this example would trigger this smell warning as well:

class Parent
  def initialize(omg)
    @omg = omg
  end
end

class Child < Parent
  def foo
    @omg
  end
end

The way to address the smell warning is that you should create an attr_reader to use @omg in the subclass and not access @omg directly like this:

class Parent
  attr_reader :omg

  def initialize(omg)
    @omg = omg
  end
end

class Child < Parent
  def foo
    omg
  end
end

Directly accessing instance variables is considered a smell because it breaks encapsulation and makes it harder to reason about code.

If you don't want to expose those methods as public API just make them private like this:

class Parent
  def initialize(omg)
    @omg = omg
  end

  private
  attr_reader :omg
end

class Child < Parent
  def foo
    omg
  end
end

Current Support in Reek

An instance variable must:

• be set in the constructor
• or be accessed through a method with lazy initialization / memoization.

If not, Instance Variable Assumption will be reported.

Classes should not assume that instance variables are set or present outside of the current class definition.

Good:

class Foo
  def initialize
    @bar = :foo
  end

  def foo?
    @bar == :foo
  end
end

Good as well:

class Foo
  def foo?
    bar == :foo
  end

  def bar
    @bar ||= :foo
  end
end

Bad:

class Foo
  def go_foo!
    @bar = :foo
  end

  def foo?
    @bar == :foo
  end
end

Example

Running Reek on:

class Dummy
  def test
    @ivar
  end
end

would report:

[1]:InstanceVariableAssumption: Dummy assumes too much for instance variable @ivar

Note that this example would trigger this smell warning as well:

class Parent
  def initialize(omg)
    @omg = omg
  end
end

class Child < Parent
  def foo
    @omg
  end
end

The way to address the smell warning is that you should create an attr_reader to use @omg in the subclass and not access @omg directly like this:

class Parent
  attr_reader :omg

  def initialize(omg)
    @omg = omg
  end
end

class Child < Parent
  def foo
    omg
  end
end

Directly accessing instance variables is considered a smell because it breaks encapsulation and makes it harder to reason about code.

If you don't want to expose those methods as public API just make them private like this:

class Parent
  def initialize(omg)
    @omg = omg
  end

  private
  attr_reader :omg
end

class Child < Parent
  def foo
    omg
  end
end

Current Support in Reek

An instance variable must:

• be set in the constructor
• or be accessed through a method with lazy initialization / memoization.

If not, Instance Variable Assumption will be reported.

Duplication occurs when two fragments of code look nearly identical, or when two fragments of code have nearly identical effects at some conceptual level.

Reek implements a check for Duplicate Method Call.

Example

Here's a very much simplified and contrived example. The following method will report a warning:

def double_thing()
  @other.thing + @other.thing
end

One quick approach to silence Reek would be to refactor the code thus:

def double_thing()
  thing = @other.thing
  thing + thing
end

A slightly different approach would be to replace all calls of double_thing by calls to @other.double_thing:

class Other
  def double_thing()
    thing + thing
  end
end

The approach you take will depend on balancing other factors in your code.

Duplication occurs when two fragments of code look nearly identical, or when two fragments of code have nearly identical effects at some conceptual level.

Reek implements a check for Duplicate Method Call.

Example

Here's a very much simplified and contrived example. The following method will report a warning:

def double_thing()
  @other.thing + @other.thing
end

One quick approach to silence Reek would be to refactor the code thus:

def double_thing()
  thing = @other.thing
  thing + thing
end

A slightly different approach would be to replace all calls of double_thing by calls to @other.double_thing:

class Other
  def double_thing()
    thing + thing
  end
end

The approach you take will depend on balancing other factors in your code.

Classes should not assume that instance variables are set or present outside of the current class definition.

Good:

class Foo
  def initialize
    @bar = :foo
  end

  def foo?
    @bar == :foo
  end
end

Good as well:

class Foo
  def foo?
    bar == :foo
  end

  def bar
    @bar ||= :foo
  end
end

Bad:

class Foo
  def go_foo!
    @bar = :foo
  end

  def foo?
    @bar == :foo
  end
end

Example

Running Reek on:

class Dummy
  def test
    @ivar
  end
end

would report:

[1]:InstanceVariableAssumption: Dummy assumes too much for instance variable @ivar

Note that this example would trigger this smell warning as well:

class Parent
  def initialize(omg)
    @omg = omg
  end
end

class Child < Parent
  def foo
    @omg
  end
end

The way to address the smell warning is that you should create an attr_reader to use @omg in the subclass and not access @omg directly like this:

class Parent
  attr_reader :omg

  def initialize(omg)
    @omg = omg
  end
end

class Child < Parent
  def foo
    omg
  end
end

Directly accessing instance variables is considered a smell because it breaks encapsulation and makes it harder to reason about code.

If you don't want to expose those methods as public API just make them private like this:

class Parent
  def initialize(omg)
    @omg = omg
  end

  private
  attr_reader :omg
end

class Child < Parent
  def foo
    omg
  end
end

Current Support in Reek

An instance variable must:

• be set in the constructor
• or be accessed through a method with lazy initialization / memoization.

If not, Instance Variable Assumption will be reported.

Duplication occurs when two fragments of code look nearly identical, or when two fragments of code have nearly identical effects at some conceptual level.

Reek implements a check for Duplicate Method Call.

Example

Here's a very much simplified and contrived example. The following method will report a warning:

def double_thing()
  @other.thing + @other.thing
end

One quick approach to silence Reek would be to refactor the code thus:

def double_thing()
  thing = @other.thing
  thing + thing
end

A slightly different approach would be to replace all calls of double_thing by calls to @other.double_thing:

class Other
  def double_thing()
    thing + thing
  end
end

The approach you take will depend on balancing other factors in your code.

Classes should not assume that instance variables are set or present outside of the current class definition.

Good:

class Foo
  def initialize
    @bar = :foo
  end

  def foo?
    @bar == :foo
  end
end

Good as well:

class Foo
  def foo?
    bar == :foo
  end

  def bar
    @bar ||= :foo
  end
end

Bad:

class Foo
  def go_foo!
    @bar = :foo
  end

  def foo?
    @bar == :foo
  end
end

Example

Running Reek on:

class Dummy
  def test
    @ivar
  end
end

would report:

[1]:InstanceVariableAssumption: Dummy assumes too much for instance variable @ivar

Note that this example would trigger this smell warning as well:

class Parent
  def initialize(omg)
    @omg = omg
  end
end

class Child < Parent
  def foo
    @omg
  end
end

The way to address the smell warning is that you should create an attr_reader to use @omg in the subclass and not access @omg directly like this:

class Parent
  attr_reader :omg

  def initialize(omg)
    @omg = omg
  end
end

class Child < Parent
  def foo
    omg
  end
end

Directly accessing instance variables is considered a smell because it breaks encapsulation and makes it harder to reason about code.

If you don't want to expose those methods as public API just make them private like this:

class Parent
  def initialize(omg)
    @omg = omg
  end

  private
  attr_reader :omg
end

class Child < Parent
  def foo
    omg
  end
end

Current Support in Reek

An instance variable must:

• be set in the constructor
• or be accessed through a method with lazy initialization / memoization.

If not, Instance Variable Assumption will be reported.

Classes should not assume that instance variables are set or present outside of the current class definition.

Good:

class Foo
  def initialize
    @bar = :foo
  end

  def foo?
    @bar == :foo
  end
end

Good as well:

class Foo
  def foo?
    bar == :foo
  end

  def bar
    @bar ||= :foo
  end
end

Bad:

class Foo
  def go_foo!
    @bar = :foo
  end

  def foo?
    @bar == :foo
  end
end

Example

Running Reek on:

class Dummy
  def test
    @ivar
  end
end

would report:

[1]:InstanceVariableAssumption: Dummy assumes too much for instance variable @ivar

Note that this example would trigger this smell warning as well:

class Parent
  def initialize(omg)
    @omg = omg
  end
end

class Child < Parent
  def foo
    @omg
  end
end

The way to address the smell warning is that you should create an attr_reader to use @omg in the subclass and not access @omg directly like this:

class Parent
  attr_reader :omg

  def initialize(omg)
    @omg = omg
  end
end

class Child < Parent
  def foo
    omg
  end
end

Directly accessing instance variables is considered a smell because it breaks encapsulation and makes it harder to reason about code.

If you don't want to expose those methods as public API just make them private like this:

class Parent
  def initialize(omg)
    @omg = omg
  end

  private
  attr_reader :omg
end

class Child < Parent
  def foo
    omg
  end
end

Current Support in Reek

An instance variable must:

• be set in the constructor
• or be accessed through a method with lazy initialization / memoization.

If not, Instance Variable Assumption will be reported.

Classes and modules are the units of reuse and release. It is therefore considered good practice to annotate every class and module with a brief comment outlining its responsibilities.

Example

Given

class Dummy
  # Do things...
end

Reek would emit the following warning:

test.rb -- 1 warning:
  [1]:Dummy has no descriptive comment (IrresponsibleModule)

Fixing this is simple - just an explaining comment:

# The Dummy class is responsible for ...
class Dummy
  # Do things...
end

Duplication occurs when two fragments of code look nearly identical, or when two fragments of code have nearly identical effects at some conceptual level.

Reek implements a check for Duplicate Method Call.

Example

Here's a very much simplified and contrived example. The following method will report a warning:

def double_thing()
  @other.thing + @other.thing
end

One quick approach to silence Reek would be to refactor the code thus:

def double_thing()
  thing = @other.thing
  thing + thing
end

A slightly different approach would be to replace all calls of double_thing by calls to @other.double_thing:

class Other
  def double_thing()
    thing + thing
  end
end

The approach you take will depend on balancing other factors in your code.

Duplication occurs when two fragments of code look nearly identical, or when two fragments of code have nearly identical effects at some conceptual level.

Reek implements a check for Duplicate Method Call.

Example

Here's a very much simplified and contrived example. The following method will report a warning:

def double_thing()
  @other.thing + @other.thing
end

One quick approach to silence Reek would be to refactor the code thus:

def double_thing()
  thing = @other.thing
  thing + thing
end

A slightly different approach would be to replace all calls of double_thing by calls to @other.double_thing:

class Other
  def double_thing()
    thing + thing
  end
end

The approach you take will depend on balancing other factors in your code.

Classes should not assume that instance variables are set or present outside of the current class definition.

Good:

class Foo
  def initialize
    @bar = :foo
  end

  def foo?
    @bar == :foo
  end
end

Good as well:

class Foo
  def foo?
    bar == :foo
  end

  def bar
    @bar ||= :foo
  end
end

Bad:

class Foo
  def go_foo!
    @bar = :foo
  end

  def foo?
    @bar == :foo
  end
end

Example

Running Reek on:

class Dummy
  def test
    @ivar
  end
end

would report:

[1]:InstanceVariableAssumption: Dummy assumes too much for instance variable @ivar

Note that this example would trigger this smell warning as well:

class Parent
  def initialize(omg)
    @omg = omg
  end
end

class Child < Parent
  def foo
    @omg
  end
end

The way to address the smell warning is that you should create an attr_reader to use @omg in the subclass and not access @omg directly like this:

class Parent
  attr_reader :omg

  def initialize(omg)
    @omg = omg
  end
end

class Child < Parent
  def foo
    omg
  end
end

Directly accessing instance variables is considered a smell because it breaks encapsulation and makes it harder to reason about code.

If you don't want to expose those methods as public API just make them private like this:

class Parent
  def initialize(omg)
    @omg = omg
  end

  private
  attr_reader :omg
end

class Child < Parent
  def foo
    omg
  end
end

Current Support in Reek

An instance variable must:

• be set in the constructor
• or be accessed through a method with lazy initialization / memoization.

If not, Instance Variable Assumption will be reported.

Classes should not assume that instance variables are set or present outside of the current class definition.

Good:

class Foo
  def initialize
    @bar = :foo
  end

  def foo?
    @bar == :foo
  end
end

Good as well:

class Foo
  def foo?
    bar == :foo
  end

  def bar
    @bar ||= :foo
  end
end

Bad:

class Foo
  def go_foo!
    @bar = :foo
  end

  def foo?
    @bar == :foo
  end
end

Example

Running Reek on:

class Dummy
  def test
    @ivar
  end
end

would report:

[1]:InstanceVariableAssumption: Dummy assumes too much for instance variable @ivar

Note that this example would trigger this smell warning as well:

class Parent
  def initialize(omg)
    @omg = omg
  end
end

class Child < Parent
  def foo
    @omg
  end
end

The way to address the smell warning is that you should create an attr_reader to use @omg in the subclass and not access @omg directly like this:

class Parent
  attr_reader :omg

  def initialize(omg)
    @omg = omg
  end
end

class Child < Parent
  def foo
    omg
  end
end

Directly accessing instance variables is considered a smell because it breaks encapsulation and makes it harder to reason about code.

If you don't want to expose those methods as public API just make them private like this:

class Parent
  def initialize(omg)
    @omg = omg
  end

  private
  attr_reader :omg
end

class Child < Parent
  def foo
    omg
  end
end

Current Support in Reek

An instance variable must:

• be set in the constructor
• or be accessed through a method with lazy initialization / memoization.

If not, Instance Variable Assumption will be reported.

Classes should not assume that instance variables are set or present outside of the current class definition.

Good:

class Foo
  def initialize
    @bar = :foo
  end

  def foo?
    @bar == :foo
  end
end

Good as well:

class Foo
  def foo?
    bar == :foo
  end

  def bar
    @bar ||= :foo
  end
end

Bad:

class Foo
  def go_foo!
    @bar = :foo
  end

  def foo?
    @bar == :foo
  end
end

Example

Running Reek on:

class Dummy
  def test
    @ivar
  end
end

would report:

[1]:InstanceVariableAssumption: Dummy assumes too much for instance variable @ivar

Note that this example would trigger this smell warning as well:

class Parent
  def initialize(omg)
    @omg = omg
  end
end

class Child < Parent
  def foo
    @omg
  end
end

The way to address the smell warning is that you should create an attr_reader to use @omg in the subclass and not access @omg directly like this:

class Parent
  attr_reader :omg

  def initialize(omg)
    @omg = omg
  end
end

class Child < Parent
  def foo
    omg
  end
end

Directly accessing instance variables is considered a smell because it breaks encapsulation and makes it harder to reason about code.

If you don't want to expose those methods as public API just make them private like this:

class Parent
  def initialize(omg)
    @omg = omg
  end

  private
  attr_reader :omg
end

class Child < Parent
  def foo
    omg
  end
end

Current Support in Reek

An instance variable must:

• be set in the constructor
• or be accessed through a method with lazy initialization / memoization.

If not, Instance Variable Assumption will be reported.

Classes should not assume that instance variables are set or present outside of the current class definition.

Good:

class Foo
  def initialize
    @bar = :foo
  end

  def foo?
    @bar == :foo
  end
end

Good as well:

class Foo
  def foo?
    bar == :foo
  end

  def bar
    @bar ||= :foo
  end
end

Bad:

class Foo
  def go_foo!
    @bar = :foo
  end

  def foo?
    @bar == :foo
  end
end

Example

Running Reek on:

class Dummy
  def test
    @ivar
  end
end

would report:

[1]:InstanceVariableAssumption: Dummy assumes too much for instance variable @ivar

Note that this example would trigger this smell warning as well:

class Parent
  def initialize(omg)
    @omg = omg
  end
end

class Child < Parent
  def foo
    @omg
  end
end

The way to address the smell warning is that you should create an attr_reader to use @omg in the subclass and not access @omg directly like this:

class Parent
  attr_reader :omg

  def initialize(omg)
    @omg = omg
  end
end

class Child < Parent
  def foo
    omg
  end
end

Directly accessing instance variables is considered a smell because it breaks encapsulation and makes it harder to reason about code.

If you don't want to expose those methods as public API just make them private like this:

class Parent
  def initialize(omg)
    @omg = omg
  end

  private
  attr_reader :omg
end

class Child < Parent
  def foo
    omg
  end
end

Current Support in Reek

An instance variable must:

• be set in the constructor
• or be accessed through a method with lazy initialization / memoization.

If not, Instance Variable Assumption will be reported.

Classes should not assume that instance variables are set or present outside of the current class definition.

Good:

class Foo
  def initialize
    @bar = :foo
  end

  def foo?
    @bar == :foo
  end
end

Good as well:

class Foo
  def foo?
    bar == :foo
  end

  def bar
    @bar ||= :foo
  end
end

Bad:

class Foo
  def go_foo!
    @bar = :foo
  end

  def foo?
    @bar == :foo
  end
end

Example

Running Reek on:

class Dummy
  def test
    @ivar
  end
end

would report:

[1]:InstanceVariableAssumption: Dummy assumes too much for instance variable @ivar

Note that this example would trigger this smell warning as well:

class Parent
  def initialize(omg)
    @omg = omg
  end
end

class Child < Parent
  def foo
    @omg
  end
end

The way to address the smell warning is that you should create an attr_reader to use @omg in the subclass and not access @omg directly like this:

class Parent
  attr_reader :omg

  def initialize(omg)
    @omg = omg
  end
end

class Child < Parent
  def foo
    omg
  end
end

Directly accessing instance variables is considered a smell because it breaks encapsulation and makes it harder to reason about code.

If you don't want to expose those methods as public API just make them private like this:

class Parent
  def initialize(omg)
    @omg = omg
  end

  private
  attr_reader :omg
end

class Child < Parent
  def foo
    omg
  end
end

Current Support in Reek

An instance variable must:

• be set in the constructor
• or be accessed through a method with lazy initialization / memoization.

If not, Instance Variable Assumption will be reported.

Classes should not assume that instance variables are set or present outside of the current class definition.

Good:

class Foo
  def initialize
    @bar = :foo
  end

  def foo?
    @bar == :foo
  end
end

Good as well:

class Foo
  def foo?
    bar == :foo
  end

  def bar
    @bar ||= :foo
  end
end

Bad:

class Foo
  def go_foo!
    @bar = :foo
  end

  def foo?
    @bar == :foo
  end
end

Example

Running Reek on:

class Dummy
  def test
    @ivar
  end
end

would report:

[1]:InstanceVariableAssumption: Dummy assumes too much for instance variable @ivar

Note that this example would trigger this smell warning as well:

class Parent
  def initialize(omg)
    @omg = omg
  end
end

class Child < Parent
  def foo
    @omg
  end
end

The way to address the smell warning is that you should create an attr_reader to use @omg in the subclass and not access @omg directly like this:

class Parent
  attr_reader :omg

  def initialize(omg)
    @omg = omg
  end
end

class Child < Parent
  def foo
    omg
  end
end

Directly accessing instance variables is considered a smell because it breaks encapsulation and makes it harder to reason about code.

If you don't want to expose those methods as public API just make them private like this:

class Parent
  def initialize(omg)
    @omg = omg
  end

  private
  attr_reader :omg
end

class Child < Parent
  def foo
    omg
  end
end

Current Support in Reek

An instance variable must:

• be set in the constructor
• or be accessed through a method with lazy initialization / memoization.

If not, Instance Variable Assumption will be reported.

Duplication occurs when two fragments of code look nearly identical, or when two fragments of code have nearly identical effects at some conceptual level.

Reek implements a check for Duplicate Method Call.

Example

Here's a very much simplified and contrived example. The following method will report a warning:

def double_thing()
  @other.thing + @other.thing
end

One quick approach to silence Reek would be to refactor the code thus:

def double_thing()
  thing = @other.thing
  thing + thing
end

A slightly different approach would be to replace all calls of double_thing by calls to @other.double_thing:

class Other
  def double_thing()
    thing + thing
  end
end

The approach you take will depend on balancing other factors in your code.

Duplication occurs when two fragments of code look nearly identical, or when two fragments of code have nearly identical effects at some conceptual level.

Reek implements a check for Duplicate Method Call.

Example

Here's a very much simplified and contrived example. The following method will report a warning:

def double_thing()
  @other.thing + @other.thing
end

One quick approach to silence Reek would be to refactor the code thus:

def double_thing()
  thing = @other.thing
  thing + thing
end

A slightly different approach would be to replace all calls of double_thing by calls to @other.double_thing:

class Other
  def double_thing()
    thing + thing
  end
end

The approach you take will depend on balancing other factors in your code.

Classes should not assume that instance variables are set or present outside of the current class definition.

Good:

class Foo
  def initialize
    @bar = :foo
  end

  def foo?
    @bar == :foo
  end
end

Good as well:

class Foo
  def foo?
    bar == :foo
  end

  def bar
    @bar ||= :foo
  end
end

Bad:

class Foo
  def go_foo!
    @bar = :foo
  end

  def foo?
    @bar == :foo
  end
end

Example

Running Reek on:

class Dummy
  def test
    @ivar
  end
end

would report:

[1]:InstanceVariableAssumption: Dummy assumes too much for instance variable @ivar

Note that this example would trigger this smell warning as well:

class Parent
  def initialize(omg)
    @omg = omg
  end
end

class Child < Parent
  def foo
    @omg
  end
end

The way to address the smell warning is that you should create an attr_reader to use @omg in the subclass and not access @omg directly like this:

class Parent
  attr_reader :omg

  def initialize(omg)
    @omg = omg
  end
end

class Child < Parent
  def foo
    omg
  end
end

Directly accessing instance variables is considered a smell because it breaks encapsulation and makes it harder to reason about code.

If you don't want to expose those methods as public API just make them private like this:

class Parent
  def initialize(omg)
    @omg = omg
  end

  private
  attr_reader :omg
end

class Child < Parent
  def foo
    omg
  end
end

Current Support in Reek

An instance variable must:

• be set in the constructor
• or be accessed through a method with lazy initialization / memoization.

If not, Instance Variable Assumption will be reported.

Duplication occurs when two fragments of code look nearly identical, or when two fragments of code have nearly identical effects at some conceptual level.

Reek implements a check for Duplicate Method Call.

Example

Here's a very much simplified and contrived example. The following method will report a warning:

def double_thing()
  @other.thing + @other.thing
end

One quick approach to silence Reek would be to refactor the code thus:

def double_thing()
  thing = @other.thing
  thing + thing
end

A slightly different approach would be to replace all calls of double_thing by calls to @other.double_thing:

class Other
  def double_thing()
    thing + thing
  end
end

The approach you take will depend on balancing other factors in your code.

Duplication occurs when two fragments of code look nearly identical, or when two fragments of code have nearly identical effects at some conceptual level.

Reek implements a check for Duplicate Method Call.

Example

Here's a very much simplified and contrived example. The following method will report a warning:

def double_thing()
  @other.thing + @other.thing
end

One quick approach to silence Reek would be to refactor the code thus:

def double_thing()
  thing = @other.thing
  thing + thing
end

A slightly different approach would be to replace all calls of double_thing by calls to @other.double_thing:

class Other
  def double_thing()
    thing + thing
  end
end

The approach you take will depend on balancing other factors in your code.

Classes should not assume that instance variables are set or present outside of the current class definition.

Good:

class Foo
  def initialize
    @bar = :foo
  end

  def foo?
    @bar == :foo
  end
end

Good as well:

class Foo
  def foo?
    bar == :foo
  end

  def bar
    @bar ||= :foo
  end
end

Bad:

class Foo
  def go_foo!
    @bar = :foo
  end

  def foo?
    @bar == :foo
  end
end

Example

Running Reek on:

class Dummy
  def test
    @ivar
  end
end

would report:

[1]:InstanceVariableAssumption: Dummy assumes too much for instance variable @ivar

Note that this example would trigger this smell warning as well:

class Parent
  def initialize(omg)
    @omg = omg
  end
end

class Child < Parent
  def foo
    @omg
  end
end

The way to address the smell warning is that you should create an attr_reader to use @omg in the subclass and not access @omg directly like this:

class Parent
  attr_reader :omg

  def initialize(omg)
    @omg = omg
  end
end

class Child < Parent
  def foo
    omg
  end
end

Directly accessing instance variables is considered a smell because it breaks encapsulation and makes it harder to reason about code.

If you don't want to expose those methods as public API just make them private like this:

class Parent
  def initialize(omg)
    @omg = omg
  end

  private
  attr_reader :omg
end

class Child < Parent
  def foo
    omg
  end
end

Current Support in Reek

An instance variable must:

• be set in the constructor
• or be accessed through a method with lazy initialization / memoization.

If not, Instance Variable Assumption will be reported.

Duplication occurs when two fragments of code look nearly identical, or when two fragments of code have nearly identical effects at some conceptual level.

Reek implements a check for Duplicate Method Call.

Example

Here's a very much simplified and contrived example. The following method will report a warning:

def double_thing()
  @other.thing + @other.thing
end

One quick approach to silence Reek would be to refactor the code thus:

def double_thing()
  thing = @other.thing
  thing + thing
end

A slightly different approach would be to replace all calls of double_thing by calls to @other.double_thing:

class Other
  def double_thing()
    thing + thing
  end
end

The approach you take will depend on balancing other factors in your code.

Classes should not assume that instance variables are set or present outside of the current class definition.

Good:

class Foo
  def initialize
    @bar = :foo
  end

  def foo?
    @bar == :foo
  end
end

Good as well:

class Foo
  def foo?
    bar == :foo
  end

  def bar
    @bar ||= :foo
  end
end

Bad:

class Foo
  def go_foo!
    @bar = :foo
  end

  def foo?
    @bar == :foo
  end
end

Example

Running Reek on:

class Dummy
  def test
    @ivar
  end
end

would report:

[1]:InstanceVariableAssumption: Dummy assumes too much for instance variable @ivar

Note that this example would trigger this smell warning as well:

class Parent
  def initialize(omg)
    @omg = omg
  end
end

class Child < Parent
  def foo
    @omg
  end
end

The way to address the smell warning is that you should create an attr_reader to use @omg in the subclass and not access @omg directly like this:

class Parent
  attr_reader :omg

  def initialize(omg)
    @omg = omg
  end
end

class Child < Parent
  def foo
    omg
  end
end

Directly accessing instance variables is considered a smell because it breaks encapsulation and makes it harder to reason about code.

If you don't want to expose those methods as public API just make them private like this:

class Parent
  def initialize(omg)
    @omg = omg
  end

  private
  attr_reader :omg
end

class Child < Parent
  def foo
    omg
  end
end

Current Support in Reek

An instance variable must:

• be set in the constructor
• or be accessed through a method with lazy initialization / memoization.

If not, Instance Variable Assumption will be reported.

Duplication occurs when two fragments of code look nearly identical, or when two fragments of code have nearly identical effects at some conceptual level.

Reek implements a check for Duplicate Method Call.

Example

Here's a very much simplified and contrived example. The following method will report a warning:

def double_thing()
  @other.thing + @other.thing
end

One quick approach to silence Reek would be to refactor the code thus:

def double_thing()
  thing = @other.thing
  thing + thing
end

A slightly different approach would be to replace all calls of double_thing by calls to @other.double_thing:

class Other
  def double_thing()
    thing + thing
  end
end

The approach you take will depend on balancing other factors in your code.

Classes should not assume that instance variables are set or present outside of the current class definition.

Good:

class Foo
  def initialize
    @bar = :foo
  end

  def foo?
    @bar == :foo
  end
end

Good as well:

class Foo
  def foo?
    bar == :foo
  end

  def bar
    @bar ||= :foo
  end
end

Bad:

class Foo
  def go_foo!
    @bar = :foo
  end

  def foo?
    @bar == :foo
  end
end

Example

Running Reek on:

class Dummy
  def test
    @ivar
  end
end

would report:

[1]:InstanceVariableAssumption: Dummy assumes too much for instance variable @ivar

Note that this example would trigger this smell warning as well:

class Parent
  def initialize(omg)
    @omg = omg
  end
end

class Child < Parent
  def foo
    @omg
  end
end

The way to address the smell warning is that you should create an attr_reader to use @omg in the subclass and not access @omg directly like this:

class Parent
  attr_reader :omg

  def initialize(omg)
    @omg = omg
  end
end

class Child < Parent
  def foo
    omg
  end
end

Directly accessing instance variables is considered a smell because it breaks encapsulation and makes it harder to reason about code.

If you don't want to expose those methods as public API just make them private like this:

class Parent
  def initialize(omg)
    @omg = omg
  end

  private
  attr_reader :omg
end

class Child < Parent
  def foo
    omg
  end
end

Current Support in Reek

An instance variable must:

• be set in the constructor
• or be accessed through a method with lazy initialization / memoization.

If not, Instance Variable Assumption will be reported.

Flog calculates the ABC score for methods. The ABC score is based on assignments, branches (method calls), and conditions.

You can read more about ABC metrics or the flog tool

A NilCheck is a type check. Failures of NilCheck violate the "tell, don't ask" principle.

Additionally, type checks often mask bigger problems in your source code like not using OOP and / or polymorphism when you should.

Example

Given

class Klass
  def nil_checker(argument)
    if argument.nil?
      puts "argument isn't nil!"
    end
  end
end

Reek would emit the following warning:

test.rb -- 1 warning:
  [3]:Klass#nil_checker performs a nil-check. (NilCheck)

A NilCheck is a type check. Failures of NilCheck violate the "tell, don't ask" principle.

Additionally, type checks often mask bigger problems in your source code like not using OOP and / or polymorphism when you should.

Example

Given

class Klass
  def nil_checker(argument)
    if argument.nil?
      puts "argument isn't nil!"
    end
  end
end

Reek would emit the following warning:

test.rb -- 1 warning:
  [3]:Klass#nil_checker performs a nil-check. (NilCheck)

Flog calculates the ABC score for methods. The ABC score is based on assignments, branches (method calls), and conditions.

You can read more about ABC metrics or the flog tool

An Uncommunicative Variable Name is a variable name that doesn't communicate its intent well enough.

Poor names make it hard for the reader to build a mental picture of what's going on in the code. They can also be mis-interpreted; and they hurt the flow of reading, because the reader must slow down to interpret the names.

An Uncommunicative Variable Name is a variable name that doesn't communicate its intent well enough.

Poor names make it hard for the reader to build a mental picture of what's going on in the code. They can also be mis-interpreted; and they hurt the flow of reading, because the reader must slow down to interpret the names.

An Uncommunicative Variable Name is a variable name that doesn't communicate its intent well enough.

Poor names make it hard for the reader to build a mental picture of what's going on in the code. They can also be mis-interpreted; and they hurt the flow of reading, because the reader must slow down to interpret the names.

An Uncommunicative Variable Name is a variable name that doesn't communicate its intent well enough.

Poor names make it hard for the reader to build a mental picture of what's going on in the code. They can also be mis-interpreted; and they hurt the flow of reading, because the reader must slow down to interpret the names.

Duplicated Code

Duplicated code can lead to software that is hard to understand and difficult to change. The Don't Repeat Yourself (DRY) principle states:

Every piece of knowledge must have a single, unambiguous, authoritative representation within a system.

When you violate DRY, bugs and maintenance problems are sure to follow. Duplicated code has a tendency to both continue to replicate and also to diverge (leaving bugs as two similar implementations differ in subtle ways).

Tuning

This issue has a mass of 32.

We set useful threshold defaults for the languages we support but you may want to adjust these settings based on your project guidelines.

The threshold configuration represents the minimum mass a code block must have to be analyzed for duplication. The lower the threshold, the more fine-grained the comparison.

If the engine is too easily reporting duplication, try raising the threshold. If you suspect that the engine isn't catching enough duplication, try lowering the threshold. The best setting tends to differ from language to language.

See codeclimate-duplication's documentation for more information about tuning the mass threshold in your .codeclimate.yml.

Refactorings

• Extract Method
• Extract Class
• Form Template Method
• Introduce Null Object
• Pull Up Method
• Pull Up Field
• Substitute Algorithm

Further Reading

• Don't Repeat Yourself on the C2 Wiki
• Duplicated Code on SourceMaking
• Refactoring: Improving the Design of Existing Code by Martin Fowler. Duplicated Code, p76

Duplicated Code

Duplicated code can lead to software that is hard to understand and difficult to change. The Don't Repeat Yourself (DRY) principle states:

Every piece of knowledge must have a single, unambiguous, authoritative representation within a system.

When you violate DRY, bugs and maintenance problems are sure to follow. Duplicated code has a tendency to both continue to replicate and also to diverge (leaving bugs as two similar implementations differ in subtle ways).

Tuning

This issue has a mass of 29.

We set useful threshold defaults for the languages we support but you may want to adjust these settings based on your project guidelines.

The threshold configuration represents the minimum mass a code block must have to be analyzed for duplication. The lower the threshold, the more fine-grained the comparison.

If the engine is too easily reporting duplication, try raising the threshold. If you suspect that the engine isn't catching enough duplication, try lowering the threshold. The best setting tends to differ from language to language.

See codeclimate-duplication's documentation for more information about tuning the mass threshold in your .codeclimate.yml.

Refactorings

• Extract Method
• Extract Class
• Form Template Method
• Introduce Null Object
• Pull Up Method
• Pull Up Field
• Substitute Algorithm

Further Reading

• Don't Repeat Yourself on the C2 Wiki
• Duplicated Code on SourceMaking
• Refactoring: Improving the Design of Existing Code by Martin Fowler. Duplicated Code, p76

Duplicated Code

Duplicated code can lead to software that is hard to understand and difficult to change. The Don't Repeat Yourself (DRY) principle states:

Every piece of knowledge must have a single, unambiguous, authoritative representation within a system.

When you violate DRY, bugs and maintenance problems are sure to follow. Duplicated code has a tendency to both continue to replicate and also to diverge (leaving bugs as two similar implementations differ in subtle ways).

Tuning

This issue has a mass of 27.

We set useful threshold defaults for the languages we support but you may want to adjust these settings based on your project guidelines.

The threshold configuration represents the minimum mass a code block must have to be analyzed for duplication. The lower the threshold, the more fine-grained the comparison.

If the engine is too easily reporting duplication, try raising the threshold. If you suspect that the engine isn't catching enough duplication, try lowering the threshold. The best setting tends to differ from language to language.

See codeclimate-duplication's documentation for more information about tuning the mass threshold in your .codeclimate.yml.

Refactorings

• Extract Method
• Extract Class
• Form Template Method
• Introduce Null Object
• Pull Up Method
• Pull Up Field
• Substitute Algorithm

Further Reading

• Don't Repeat Yourself on the C2 Wiki
• Duplicated Code on SourceMaking
• Refactoring: Improving the Design of Existing Code by Martin Fowler. Duplicated Code, p76