TracksApp/tracks

Feature Envy occurs when a code fragment references another object more often than it references itself, or when several clients do the same series of manipulations on a particular type of object.

Feature Envy reduces the code's ability to communicate intent: code that "belongs" on one class but which is located in another can be hard to find, and may upset the "System of Names" in the host class.

Feature Envy also affects the design's flexibility: A code fragment that is in the wrong class creates couplings that may not be natural within the application's domain, and creates a loss of cohesion in the unwilling host class.

Feature Envy often arises because it must manipulate other objects (usually its arguments) to get them into a useful form, and one force preventing them (the arguments) doing this themselves is that the common knowledge lives outside the arguments, or the arguments are of too basic a type to justify extending that type. Therefore there must be something which 'knows' about the contents or purposes of the arguments. That thing would have to be more than just a basic type, because the basic types are either containers which don't know about their contents, or they are single objects which can't capture their relationship with their fellows of the same type. So, this thing with the extra knowledge should be reified into a class, and the utility method will most likely belong there.

Example

Running Reek on:

class Warehouse
  def sale_price(item)
    (item.price - item.rebate) * @vat
  end
end

would report:

Warehouse#total_price refers to item more than self (FeatureEnvy)

since this:

(item.price - item.rebate)

belongs to the Item class, not the Warehouse.

Too Many Instance Variables is a special case of LargeClass.

Example

Given this configuration

TooManyInstanceVariables:
  max_instance_variables: 3

and this code:

class TooManyInstanceVariables
  def initialize
    @arg_1 = :dummy
    @arg_2 = :dummy
    @arg_3 = :dummy
    @arg_4 = :dummy
  end
end

Reek would emit the following warning:

test.rb -- 5 warnings:
  [1]:TooManyInstanceVariables has at least 4 instance variables (TooManyInstanceVariables)

Too Many Methods is a special case of LargeClass.

Example

Given this configuration

TooManyMethods:
  max_methods: 3

and this code:

class TooManyMethods
  def one; end
  def two; end
  def three; end
  def four; end
end

Reek would emit the following warning:

test.rb -- 1 warning:
  [1]:TooManyMethods has at least 4 methods (TooManyMethods)

Feature Envy occurs when a code fragment references another object more often than it references itself, or when several clients do the same series of manipulations on a particular type of object.

Feature Envy reduces the code's ability to communicate intent: code that "belongs" on one class but which is located in another can be hard to find, and may upset the "System of Names" in the host class.

Feature Envy also affects the design's flexibility: A code fragment that is in the wrong class creates couplings that may not be natural within the application's domain, and creates a loss of cohesion in the unwilling host class.

Feature Envy often arises because it must manipulate other objects (usually its arguments) to get them into a useful form, and one force preventing them (the arguments) doing this themselves is that the common knowledge lives outside the arguments, or the arguments are of too basic a type to justify extending that type. Therefore there must be something which 'knows' about the contents or purposes of the arguments. That thing would have to be more than just a basic type, because the basic types are either containers which don't know about their contents, or they are single objects which can't capture their relationship with their fellows of the same type. So, this thing with the extra knowledge should be reified into a class, and the utility method will most likely belong there.

Example

Running Reek on:

class Warehouse
  def sale_price(item)
    (item.price - item.rebate) * @vat
  end
end

would report:

Warehouse#total_price refers to item more than self (FeatureEnvy)

since this:

(item.price - item.rebate)

belongs to the Item class, not the Warehouse.

Duplication occurs when two fragments of code look nearly identical, or when two fragments of code have nearly identical effects at some conceptual level.

Reek implements a check for Duplicate Method Call.

Example

Here's a very much simplified and contrived example. The following method will report a warning:

def double_thing()
  @other.thing + @other.thing
end

One quick approach to silence Reek would be to refactor the code thus:

def double_thing()
  thing = @other.thing
  thing + thing
end

A slightly different approach would be to replace all calls of double_thing by calls to @other.double_thing:

class Other
  def double_thing()
    thing + thing
  end
end

The approach you take will depend on balancing other factors in your code.

Classes should not assume that instance variables are set or present outside of the current class definition.

Good:

class Foo
  def initialize
    @bar = :foo
  end

  def foo?
    @bar == :foo
  end
end

Good as well:

class Foo
  def foo?
    bar == :foo
  end

  def bar
    @bar ||= :foo
  end
end

Bad:

class Foo
  def go_foo!
    @bar = :foo
  end

  def foo?
    @bar == :foo
  end
end

Example

Running Reek on:

class Dummy
  def test
    @ivar
  end
end

would report:

[1]:InstanceVariableAssumption: Dummy assumes too much for instance variable @ivar

Note that this example would trigger this smell warning as well:

class Parent
  def initialize(omg)
    @omg = omg
  end
end

class Child < Parent
  def foo
    @omg
  end
end

The way to address the smell warning is that you should create an attr_reader to use @omg in the subclass and not access @omg directly like this:

class Parent
  attr_reader :omg

  def initialize(omg)
    @omg = omg
  end
end

class Child < Parent
  def foo
    omg
  end
end

Directly accessing instance variables is considered a smell because it breaks encapsulation and makes it harder to reason about code.

If you don't want to expose those methods as public API just make them private like this:

class Parent
  def initialize(omg)
    @omg = omg
  end

  private
  attr_reader :omg
end

class Child < Parent
  def foo
    omg
  end
end

Current Support in Reek

An instance variable must:

• be set in the constructor
• or be accessed through a method with lazy initialization / memoization.

If not, Instance Variable Assumption will be reported.

Duplication occurs when two fragments of code look nearly identical, or when two fragments of code have nearly identical effects at some conceptual level.

Reek implements a check for Duplicate Method Call.

Example

Here's a very much simplified and contrived example. The following method will report a warning:

def double_thing()
  @other.thing + @other.thing
end

One quick approach to silence Reek would be to refactor the code thus:

def double_thing()
  thing = @other.thing
  thing + thing
end

A slightly different approach would be to replace all calls of double_thing by calls to @other.double_thing:

class Other
  def double_thing()
    thing + thing
  end
end

The approach you take will depend on balancing other factors in your code.

Duplication occurs when two fragments of code look nearly identical, or when two fragments of code have nearly identical effects at some conceptual level.

Reek implements a check for Duplicate Method Call.

Example

Here's a very much simplified and contrived example. The following method will report a warning:

def double_thing()
  @other.thing + @other.thing
end

One quick approach to silence Reek would be to refactor the code thus:

def double_thing()
  thing = @other.thing
  thing + thing
end

A slightly different approach would be to replace all calls of double_thing by calls to @other.double_thing:

class Other
  def double_thing()
    thing + thing
  end
end

The approach you take will depend on balancing other factors in your code.

Duplication occurs when two fragments of code look nearly identical, or when two fragments of code have nearly identical effects at some conceptual level.

Reek implements a check for Duplicate Method Call.

Example

Here's a very much simplified and contrived example. The following method will report a warning:

def double_thing()
  @other.thing + @other.thing
end

One quick approach to silence Reek would be to refactor the code thus:

def double_thing()
  thing = @other.thing
  thing + thing
end

A slightly different approach would be to replace all calls of double_thing by calls to @other.double_thing:

class Other
  def double_thing()
    thing + thing
  end
end

The approach you take will depend on balancing other factors in your code.

Duplication occurs when two fragments of code look nearly identical, or when two fragments of code have nearly identical effects at some conceptual level.

Reek implements a check for Duplicate Method Call.

Example

Here's a very much simplified and contrived example. The following method will report a warning:

def double_thing()
  @other.thing + @other.thing
end

One quick approach to silence Reek would be to refactor the code thus:

def double_thing()
  thing = @other.thing
  thing + thing
end

A slightly different approach would be to replace all calls of double_thing by calls to @other.double_thing:

class Other
  def double_thing()
    thing + thing
  end
end

The approach you take will depend on balancing other factors in your code.

Classes should not assume that instance variables are set or present outside of the current class definition.

Good:

class Foo
  def initialize
    @bar = :foo
  end

  def foo?
    @bar == :foo
  end
end

Good as well:

class Foo
  def foo?
    bar == :foo
  end

  def bar
    @bar ||= :foo
  end
end

Bad:

class Foo
  def go_foo!
    @bar = :foo
  end

  def foo?
    @bar == :foo
  end
end

Example

Running Reek on:

class Dummy
  def test
    @ivar
  end
end

would report:

[1]:InstanceVariableAssumption: Dummy assumes too much for instance variable @ivar

Note that this example would trigger this smell warning as well:

class Parent
  def initialize(omg)
    @omg = omg
  end
end

class Child < Parent
  def foo
    @omg
  end
end

The way to address the smell warning is that you should create an attr_reader to use @omg in the subclass and not access @omg directly like this:

class Parent
  attr_reader :omg

  def initialize(omg)
    @omg = omg
  end
end

class Child < Parent
  def foo
    omg
  end
end

Directly accessing instance variables is considered a smell because it breaks encapsulation and makes it harder to reason about code.

If you don't want to expose those methods as public API just make them private like this:

class Parent
  def initialize(omg)
    @omg = omg
  end

  private
  attr_reader :omg
end

class Child < Parent
  def foo
    omg
  end
end

Current Support in Reek

An instance variable must:

• be set in the constructor
• or be accessed through a method with lazy initialization / memoization.

If not, Instance Variable Assumption will be reported.

Duplication occurs when two fragments of code look nearly identical, or when two fragments of code have nearly identical effects at some conceptual level.

Reek implements a check for Duplicate Method Call.

Example

Here's a very much simplified and contrived example. The following method will report a warning:

def double_thing()
  @other.thing + @other.thing
end

One quick approach to silence Reek would be to refactor the code thus:

def double_thing()
  thing = @other.thing
  thing + thing
end

A slightly different approach would be to replace all calls of double_thing by calls to @other.double_thing:

class Other
  def double_thing()
    thing + thing
  end
end

The approach you take will depend on balancing other factors in your code.

Duplication occurs when two fragments of code look nearly identical, or when two fragments of code have nearly identical effects at some conceptual level.

Reek implements a check for Duplicate Method Call.

Example

Here's a very much simplified and contrived example. The following method will report a warning:

def double_thing()
  @other.thing + @other.thing
end

One quick approach to silence Reek would be to refactor the code thus:

def double_thing()
  thing = @other.thing
  thing + thing
end

A slightly different approach would be to replace all calls of double_thing by calls to @other.double_thing:

class Other
  def double_thing()
    thing + thing
  end
end

The approach you take will depend on balancing other factors in your code.

Classes and modules are the units of reuse and release. It is therefore considered good practice to annotate every class and module with a brief comment outlining its responsibilities.

Example

Given

class Dummy
  # Do things...
end

Reek would emit the following warning:

test.rb -- 1 warning:
  [1]:Dummy has no descriptive comment (IrresponsibleModule)

Fixing this is simple - just an explaining comment:

# The Dummy class is responsible for ...
class Dummy
  # Do things...
end

Duplication occurs when two fragments of code look nearly identical, or when two fragments of code have nearly identical effects at some conceptual level.

Reek implements a check for Duplicate Method Call.

Example

Here's a very much simplified and contrived example. The following method will report a warning:

def double_thing()
  @other.thing + @other.thing
end

One quick approach to silence Reek would be to refactor the code thus:

def double_thing()
  thing = @other.thing
  thing + thing
end

A slightly different approach would be to replace all calls of double_thing by calls to @other.double_thing:

class Other
  def double_thing()
    thing + thing
  end
end

The approach you take will depend on balancing other factors in your code.

Duplication occurs when two fragments of code look nearly identical, or when two fragments of code have nearly identical effects at some conceptual level.

Reek implements a check for Duplicate Method Call.

Example

Here's a very much simplified and contrived example. The following method will report a warning:

def double_thing()
  @other.thing + @other.thing
end

One quick approach to silence Reek would be to refactor the code thus:

def double_thing()
  thing = @other.thing
  thing + thing
end

A slightly different approach would be to replace all calls of double_thing by calls to @other.double_thing:

class Other
  def double_thing()
    thing + thing
  end
end

The approach you take will depend on balancing other factors in your code.

Duplication occurs when two fragments of code look nearly identical, or when two fragments of code have nearly identical effects at some conceptual level.

Reek implements a check for Duplicate Method Call.

Example

Here's a very much simplified and contrived example. The following method will report a warning:

def double_thing()
  @other.thing + @other.thing
end

One quick approach to silence Reek would be to refactor the code thus:

def double_thing()
  thing = @other.thing
  thing + thing
end

A slightly different approach would be to replace all calls of double_thing by calls to @other.double_thing:

class Other
  def double_thing()
    thing + thing
  end
end

The approach you take will depend on balancing other factors in your code.

A NilCheck is a type check. Failures of NilCheck violate the "tell, don't ask" principle.

Additionally, type checks often mask bigger problems in your source code like not using OOP and / or polymorphism when you should.

Example

Given

class Klass
  def nil_checker(argument)
    if argument.nil?
      puts "argument isn't nil!"
    end
  end
end

Reek would emit the following warning:

test.rb -- 1 warning:
  [3]:Klass#nil_checker performs a nil-check. (NilCheck)

A NilCheck is a type check. Failures of NilCheck violate the "tell, don't ask" principle.

Additionally, type checks often mask bigger problems in your source code like not using OOP and / or polymorphism when you should.

Example

Given

class Klass
  def nil_checker(argument)
    if argument.nil?
      puts "argument isn't nil!"
    end
  end
end

Reek would emit the following warning:

test.rb -- 1 warning:
  [3]:Klass#nil_checker performs a nil-check. (NilCheck)

A NilCheck is a type check. Failures of NilCheck violate the "tell, don't ask" principle.

Additionally, type checks often mask bigger problems in your source code like not using OOP and / or polymorphism when you should.

Example

Given

class Klass
  def nil_checker(argument)
    if argument.nil?
      puts "argument isn't nil!"
    end
  end
end

Reek would emit the following warning:

test.rb -- 1 warning:
  [3]:Klass#nil_checker performs a nil-check. (NilCheck)

A Utility Function is any instance method that has no dependency on the state of the instance.

In general, a Data Clump occurs when the same two or three items frequently appear together in classes and parameter lists, or when a group of instance variable names start or end with similar substrings.

The recurrence of the items often means there is duplicate code spread around to handle them. There may be an abstraction missing from the code, making the system harder to understand.

Example

Given

class Dummy
  def x(y1,y2); end
  def y(y1,y2); end
  def z(y1,y2); end
end

Reek would emit the following warning:

test.rb -- 1 warning:
  [2, 3, 4]:Dummy takes parameters [y1, y2] to 3 methods (DataClump)

A possible way to fix this problem (quoting from Martin Fowler):

The first step is to replace data clumps with objects and use the objects whenever you see them. An immediate benefit is that you'll shrink some parameter lists. The interesting stuff happens as you begin to look for behavior to move into the new objects.

A NilCheck is a type check. Failures of NilCheck violate the "tell, don't ask" principle.

Additionally, type checks often mask bigger problems in your source code like not using OOP and / or polymorphism when you should.

Example

Given

class Klass
  def nil_checker(argument)
    if argument.nil?
      puts "argument isn't nil!"
    end
  end
end

Reek would emit the following warning:

test.rb -- 1 warning:
  [3]:Klass#nil_checker performs a nil-check. (NilCheck)

An Uncommunicative Variable Name is a variable name that doesn't communicate its intent well enough.

Poor names make it hard for the reader to build a mental picture of what's going on in the code. They can also be mis-interpreted; and they hurt the flow of reading, because the reader must slow down to interpret the names.

This cop is designed to help upgrade to Ruby 3.0. It will add the comment # frozen_string_literal: true to the top of files to enable frozen string literals. Frozen string literals may be default in Ruby 3.0. The comment will be added below a shebang and encoding comment. The frozen string literal comment is only valid in Ruby 2.3+.

Example: EnforcedStyle: when_needed (default)

# The `when_needed` style will add the frozen string literal comment
# to files only when the `TargetRubyVersion` is set to 2.3+.
# bad
module Foo
  # ...
end

# good
# frozen_string_literal: true

module Foo
  # ...
end

Example: EnforcedStyle: always

# The `always` style will always add the frozen string literal comment
# to a file, regardless of the Ruby version or if `freeze` or `<<` are
# called on a string literal.
# bad
module Bar
  # ...
end

# good
# frozen_string_literal: true

module Bar
  # ...
end

Example: EnforcedStyle: never

# The `never` will enforce that the frozen string literal comment does
# not exist in a file.
# bad
# frozen_string_literal: true

module Baz
  # ...
end

# good
module Baz
  # ...
end

This cop checks that the closing brace in a method call is either on the same line as the last method argument, or a new line.

When using the symmetrical (default) style:

If a method call's opening brace is on the same line as the first argument of the call, then the closing brace should be on the same line as the last argument of the call.

If an method call's opening brace is on the line above the first argument of the call, then the closing brace should be on the line below the last argument of the call.

When using the new_line style:

The closing brace of a multi-line method call must be on the line after the last argument of the call.

When using the same_line style:

The closing brace of a multi-line method call must be on the same line as the last argument of the call.

Example:

# symmetrical: bad
  # new_line: good
  # same_line: bad
  foo(a,
    b
  )

  # symmetrical: bad
  # new_line: bad
  # same_line: good
  foo(
    a,
    b)

  # symmetrical: good
  # new_line: bad
  # same_line: good
  foo(a,
    b)

  # symmetrical: good
  # new_line: good
  # same_line: bad
  foo(
    a,
    b
  )

This cop checks for rescuing StandardError. There are two supported styles implicit and explicit. This cop will not register an offense if any error other than StandardError is specified.

Example: EnforcedStyle: implicit

# `implicit` will enforce using `rescue` instead of
# `rescue StandardError`.

# bad
begin
  foo
rescue StandardError
  bar
end

# good
begin
  foo
rescue
  bar
end

# good
begin
  foo
rescue OtherError
  bar
end

# good
begin
  foo
rescue StandardError, SecurityError
  bar
end

Example: EnforcedStyle: explicit (default)

# `explicit` will enforce using `rescue StandardError`
# instead of `rescue`.

# bad
begin
  foo
rescue
  bar
end

# good
begin
  foo
rescue StandardError
  bar
end

# good
begin
  foo
rescue OtherError
  bar
end

# good
begin
  foo
rescue StandardError, SecurityError
  bar
end

Use a guard clause instead of wrapping the code inside a conditional expression

Example:

# bad
def test
  if something
    work
  end
end

# good
def test
  return unless something
  work
end

# also good
def test
  work if something
end

# bad
if something
  raise 'exception'
else
  ok
end

# good
raise 'exception' if something
ok

Use a guard clause instead of wrapping the code inside a conditional expression

Example:

# bad
def test
  if something
    work
  end
end

# good
def test
  return unless something
  work
end

# also good
def test
  work if something
end

# bad
if something
  raise 'exception'
else
  ok
end

# good
raise 'exception' if something
ok

This cop checks for redundant return expressions.

Example:

def test
  return something
end

def test
  one
  two
  three
  return something
end

It should be extended to handle methods whose body is if/else or a case expression with a default branch.

Checks for if and unless statements that would fit on one line if written as a modifier if/unless. The maximum line length is configured in the Metrics/LineLength cop.

Example:

# bad
if condition
  do_stuff(bar)
end

unless qux.empty?
  Foo.do_something
end

# good
do_stuff(bar) if condition
Foo.do_something unless qux.empty?

This cop transforms usages of a method call safeguarded by a non nil check for the variable whose method is being called to safe navigation (&.).

Configuration option: ConvertCodeThatCanStartToReturnNil The default for this is false. When configured to true, this will check for code in the format !foo.nil? && foo.bar. As it is written, the return of this code is limited to false and whatever the return of the method is. If this is converted to safe navigation, foo&.bar can start returning nil as well as what the method returns.

Example:

# bad
foo.bar if foo
foo.bar(param1, param2) if foo
foo.bar { |e| e.something } if foo
foo.bar(param) { |e| e.something } if foo

foo.bar if !foo.nil?
foo.bar unless !foo
foo.bar unless foo.nil?

foo && foo.bar
foo && foo.bar(param1, param2)
foo && foo.bar { |e| e.something }
foo && foo.bar(param) { |e| e.something }

# good
foo&.bar
foo&.bar(param1, param2)
foo&.bar { |e| e.something }
foo&.bar(param) { |e| e.something }

foo.nil? || foo.bar
!foo || foo.bar

# Methods that `nil` will `respond_to?` should not be converted to
# use safe navigation
foo.to_i if foo

This cop makes sure that accessor methods are named properly.

Example:

# bad
def set_attribute(value)
end

# good
def attribute=(value)
end

# bad
def get_attribute
end

# good
def attribute
end

Checks for if and unless statements that would fit on one line if written as a modifier if/unless. The maximum line length is configured in the Metrics/LineLength cop.

Example:

# bad
if condition
  do_stuff(bar)
end

unless qux.empty?
  Foo.do_something
end

# good
do_stuff(bar) if condition
Foo.do_something unless qux.empty?

This cop checks whether the rescue and ensure keywords are aligned properly.

Example:

# bad
begin
  something
  rescue
  puts 'error'
end

# good
begin
  something
rescue
  puts 'error'
end

This cop checks for redundant return expressions.

Example:

def test
  return something
end

def test
  one
  two
  three
  return something
end

It should be extended to handle methods whose body is if/else or a case expression with a default branch.

Checks for if and unless statements that would fit on one line if written as a modifier if/unless. The maximum line length is configured in the Metrics/LineLength cop.

Example:

# bad
if condition
  do_stuff(bar)
end

unless qux.empty?
  Foo.do_something
end

# good
do_stuff(bar) if condition
Foo.do_something unless qux.empty?

This cop transforms usages of a method call safeguarded by a non nil check for the variable whose method is being called to safe navigation (&.).

Configuration option: ConvertCodeThatCanStartToReturnNil The default for this is false. When configured to true, this will check for code in the format !foo.nil? && foo.bar. As it is written, the return of this code is limited to false and whatever the return of the method is. If this is converted to safe navigation, foo&.bar can start returning nil as well as what the method returns.

Example:

# bad
foo.bar if foo
foo.bar(param1, param2) if foo
foo.bar { |e| e.something } if foo
foo.bar(param) { |e| e.something } if foo

foo.bar if !foo.nil?
foo.bar unless !foo
foo.bar unless foo.nil?

foo && foo.bar
foo && foo.bar(param1, param2)
foo && foo.bar { |e| e.something }
foo && foo.bar(param) { |e| e.something }

# good
foo&.bar
foo&.bar(param1, param2)
foo&.bar { |e| e.something }
foo&.bar(param) { |e| e.something }

foo.nil? || foo.bar
!foo || foo.bar

# Methods that `nil` will `respond_to?` should not be converted to
# use safe navigation
foo.to_i if foo