TracksApp/tracks

This warning comes up if a model does not limit what attributes can be set through mass assignment.

In particular, this check looks for attr_accessible inside model definitions. If it is not found, this warning will be issued.

Brakeman also warns on use of attr_protected - especially since it was found to be vulnerable to bypass. Warnings for mass assignment on models using attr_protected will be reported, but at a lower confidence level.

Note that disabling mass assignment globally will suppress these warnings.

Classes and modules are the units of reuse and release. It is therefore considered good practice to annotate every class and module with a brief comment outlining its responsibilities.

Example

Given

class Dummy
  # Do things...
end

Reek would emit the following warning:

test.rb -- 1 warning:
  [1]:Dummy has no descriptive comment (IrresponsibleModule)

Fixing this is simple - just an explaining comment:

# The Dummy class is responsible for ...
class Dummy
  # Do things...
end

A NilCheck is a type check. Failures of NilCheck violate the "tell, don't ask" principle.

Additionally, type checks often mask bigger problems in your source code like not using OOP and / or polymorphism when you should.

Example

Given

class Klass
  def nil_checker(argument)
    if argument.nil?
      puts "argument isn't nil!"
    end
  end
end

Reek would emit the following warning:

test.rb -- 1 warning:
  [3]:Klass#nil_checker performs a nil-check. (NilCheck)

This cop looks for has(one|many) and belongsto associations where ActiveRecord can't automatically determine the inverse association because of a scope or the options used. This can result in unnecessary queries in some circumstances. :inverse_of must be manually specified for associations to work in both ways, or set to false to opt-out.

Example:

# good
class Blog < ApplicationRecord
  has_many :posts
end

class Post < ApplicationRecord
  belongs_to :blog
end

Example:

# bad
class Blog < ApplicationRecord
  has_many :posts, -> { order(published_at: :desc) }
end

class Post < ApplicationRecord
  belongs_to :blog
end

# good
class Blog < ApplicationRecord
  has_many(:posts,
    -> { order(published_at: :desc) },
    inverse_of: :blog
  )
end

class Post < ApplicationRecord
  belongs_to :blog
end

# good
class Blog < ApplicationRecord
  with_options inverse_of: :blog do
    has_many :posts, -> { order(published_at: :desc) }
  end
end

class Post < ApplicationRecord
  belongs_to :blog
end

Example:

# bad
class Picture < ApplicationRecord
  belongs_to :imageable, polymorphic: true
end

class Employee < ApplicationRecord
  has_many :pictures, as: :imageable
end

class Product < ApplicationRecord
  has_many :pictures, as: :imageable
end

# good
class Picture < ApplicationRecord
  belongs_to :imageable, polymorphic: true
end

class Employee < ApplicationRecord
  has_many :pictures, as: :imageable, inverse_of: :imageable
end

class Product < ApplicationRecord
  has_many :pictures, as: :imageable, inverse_of: :imageable
end

Example:

# bad
# However, RuboCop can not detect this pattern...
class Physician < ApplicationRecord
  has_many :appointments
  has_many :patients, through: :appointments
end

class Appointment < ApplicationRecord
  belongs_to :physician
  belongs_to :patient
end

class Patient < ApplicationRecord
  has_many :appointments
  has_many :physicians, through: :appointments
end

# good
class Physician < ApplicationRecord
  has_many :appointments
  has_many :patients, through: :appointments
end

class Appointment < ApplicationRecord
  belongs_to :physician, inverse_of: :appointments
  belongs_to :patient, inverse_of: :appointments
end

class Patient < ApplicationRecord
  has_many :appointments
  has_many :physicians, through: :appointments
end

@see http://guides.rubyonrails.org/association_basics.html#bi-directional-associations @see http://api.rubyonrails.org/classes/ActiveRecord/Associations/ClassMethods.html#module-ActiveRecord::Associations::ClassMethods-label-Setting+Inverses

This cop looks for has(one|many) and belongsto associations where ActiveRecord can't automatically determine the inverse association because of a scope or the options used. This can result in unnecessary queries in some circumstances. :inverse_of must be manually specified for associations to work in both ways, or set to false to opt-out.

Example:

# good
class Blog < ApplicationRecord
  has_many :posts
end

class Post < ApplicationRecord
  belongs_to :blog
end

Example:

# bad
class Blog < ApplicationRecord
  has_many :posts, -> { order(published_at: :desc) }
end

class Post < ApplicationRecord
  belongs_to :blog
end

# good
class Blog < ApplicationRecord
  has_many(:posts,
    -> { order(published_at: :desc) },
    inverse_of: :blog
  )
end

class Post < ApplicationRecord
  belongs_to :blog
end

# good
class Blog < ApplicationRecord
  with_options inverse_of: :blog do
    has_many :posts, -> { order(published_at: :desc) }
  end
end

class Post < ApplicationRecord
  belongs_to :blog
end

Example:

# bad
class Picture < ApplicationRecord
  belongs_to :imageable, polymorphic: true
end

class Employee < ApplicationRecord
  has_many :pictures, as: :imageable
end

class Product < ApplicationRecord
  has_many :pictures, as: :imageable
end

# good
class Picture < ApplicationRecord
  belongs_to :imageable, polymorphic: true
end

class Employee < ApplicationRecord
  has_many :pictures, as: :imageable, inverse_of: :imageable
end

class Product < ApplicationRecord
  has_many :pictures, as: :imageable, inverse_of: :imageable
end

Example:

# bad
# However, RuboCop can not detect this pattern...
class Physician < ApplicationRecord
  has_many :appointments
  has_many :patients, through: :appointments
end

class Appointment < ApplicationRecord
  belongs_to :physician
  belongs_to :patient
end

class Patient < ApplicationRecord
  has_many :appointments
  has_many :physicians, through: :appointments
end

# good
class Physician < ApplicationRecord
  has_many :appointments
  has_many :patients, through: :appointments
end

class Appointment < ApplicationRecord
  belongs_to :physician, inverse_of: :appointments
  belongs_to :patient, inverse_of: :appointments
end

class Patient < ApplicationRecord
  has_many :appointments
  has_many :physicians, through: :appointments
end

@see http://guides.rubyonrails.org/association_basics.html#bi-directional-associations @see http://api.rubyonrails.org/classes/ActiveRecord/Associations/ClassMethods.html#module-ActiveRecord::Associations::ClassMethods-label-Setting+Inverses

This cop is designed to help upgrade to Ruby 3.0. It will add the comment # frozen_string_literal: true to the top of files to enable frozen string literals. Frozen string literals may be default in Ruby 3.0. The comment will be added below a shebang and encoding comment. The frozen string literal comment is only valid in Ruby 2.3+.

Example: EnforcedStyle: when_needed (default)

# The `when_needed` style will add the frozen string literal comment
# to files only when the `TargetRubyVersion` is set to 2.3+.
# bad
module Foo
  # ...
end

# good
# frozen_string_literal: true

module Foo
  # ...
end

Example: EnforcedStyle: always

# The `always` style will always add the frozen string literal comment
# to a file, regardless of the Ruby version or if `freeze` or `<<` are
# called on a string literal.
# bad
module Bar
  # ...
end

# good
# frozen_string_literal: true

module Bar
  # ...
end

Example: EnforcedStyle: never

# The `never` will enforce that the frozen string literal comment does
# not exist in a file.
# bad
# frozen_string_literal: true

module Baz
  # ...
end

# good
module Baz
  # ...
end

Use a guard clause instead of wrapping the code inside a conditional expression

Example:

# bad
def test
  if something
    work
  end
end

# good
def test
  return unless something
  work
end

# also good
def test
  work if something
end

# bad
if something
  raise 'exception'
else
  ok
end

# good
raise 'exception' if something
ok