Showing 24 of 24 total issues
File markdown.js
has 999 lines of code (exceeds 250 allowed). Consider refactoring. Open
// Released under MIT license
// Copyright (c) 2009-2010 Dominic Baggott
// Copyright (c) 2009-2010 Ash Berlin
// Copyright (c) 2011 Christoph Dorn <christoph@christophdorn.com> (http://www.christophdorn.com)
Function lists
has 156 lines of code (exceeds 25 allowed). Consider refactoring. Open
lists: (function( ) {
// Use a closure to hide a few variables.
var any_list = "[*+-]|\\d+\\.",
bullet_list = /[*+-]/,
number_list = /\d+\./,
Similar blocks of code found in 2 locations. Consider refactoring. Open
case "link_ref":
jsonml[ 0 ] = "a";
// grab this ref and clean up the attribute node
var ref = references[ attrs.ref ];
- Read upRead up
Duplicated Code
Duplicated code can lead to software that is hard to understand and difficult to change. The Don't Repeat Yourself (DRY) principle states:
Every piece of knowledge must have a single, unambiguous, authoritative representation within a system.
When you violate DRY, bugs and maintenance problems are sure to follow. Duplicated code has a tendency to both continue to replicate and also to diverge (leaving bugs as two similar implementations differ in subtle ways).
Tuning
This issue has a mass of 128.
We set useful threshold defaults for the languages we support but you may want to adjust these settings based on your project guidelines.
The threshold configuration represents the minimum mass a code block must have to be analyzed for duplication. The lower the threshold, the more fine-grained the comparison.
If the engine is too easily reporting duplication, try raising the threshold. If you suspect that the engine isn't catching enough duplication, try lowering the threshold. The best setting tends to differ from language to language.
See codeclimate-duplication
's documentation for more information about tuning the mass threshold in your .codeclimate.yml
.
Refactorings
- Extract Method
- Extract Class
- Form Template Method
- Introduce Null Object
- Pull Up Method
- Pull Up Field
- Substitute Algorithm
Further Reading
- Don't Repeat Yourself on the C2 Wiki
- Duplicated Code on SourceMaking
- Refactoring: Improving the Design of Existing Code by Martin Fowler. Duplicated Code, p76
Similar blocks of code found in 2 locations. Consider refactoring. Open
case "img_ref":
jsonml[ 0 ] = "img";
// grab this ref and clean up the attribute node
var ref = references[ attrs.ref ];
- Read upRead up
Duplicated Code
Duplicated code can lead to software that is hard to understand and difficult to change. The Don't Repeat Yourself (DRY) principle states:
Every piece of knowledge must have a single, unambiguous, authoritative representation within a system.
When you violate DRY, bugs and maintenance problems are sure to follow. Duplicated code has a tendency to both continue to replicate and also to diverge (leaving bugs as two similar implementations differ in subtle ways).
Tuning
This issue has a mass of 128.
We set useful threshold defaults for the languages we support but you may want to adjust these settings based on your project guidelines.
The threshold configuration represents the minimum mass a code block must have to be analyzed for duplication. The lower the threshold, the more fine-grained the comparison.
If the engine is too easily reporting duplication, try raising the threshold. If you suspect that the engine isn't catching enough duplication, try lowering the threshold. The best setting tends to differ from language to language.
See codeclimate-duplication
's documentation for more information about tuning the mass threshold in your .codeclimate.yml
.
Refactorings
- Extract Method
- Extract Class
- Form Template Method
- Introduce Null Object
- Pull Up Method
- Pull Up Field
- Substitute Algorithm
Further Reading
- Don't Repeat Yourself on the C2 Wiki
- Duplicated Code on SourceMaking
- Refactoring: Improving the Design of Existing Code by Martin Fowler. Duplicated Code, p76
Function convert_tree_to_html
has 102 lines of code (exceeds 25 allowed). Consider refactoring. Open
function convert_tree_to_html( tree, references, options ) {
var i;
options = options || {};
// shallow clone
Identical blocks of code found in 2 locations. Consider refactoring. Open
if ( m[2] && m[2][0] == '<' && m[2][m[2].length-1] == '>' )
m[2] = m[2].substring( 1, m[2].length - 1 );
- Read upRead up
Duplicated Code
Duplicated code can lead to software that is hard to understand and difficult to change. The Don't Repeat Yourself (DRY) principle states:
Every piece of knowledge must have a single, unambiguous, authoritative representation within a system.
When you violate DRY, bugs and maintenance problems are sure to follow. Duplicated code has a tendency to both continue to replicate and also to diverge (leaving bugs as two similar implementations differ in subtle ways).
Tuning
This issue has a mass of 88.
We set useful threshold defaults for the languages we support but you may want to adjust these settings based on your project guidelines.
The threshold configuration represents the minimum mass a code block must have to be analyzed for duplication. The lower the threshold, the more fine-grained the comparison.
If the engine is too easily reporting duplication, try raising the threshold. If you suspect that the engine isn't catching enough duplication, try lowering the threshold. The best setting tends to differ from language to language.
See codeclimate-duplication
's documentation for more information about tuning the mass threshold in your .codeclimate.yml
.
Refactorings
- Extract Method
- Extract Class
- Form Template Method
- Introduce Null Object
- Pull Up Method
- Pull Up Field
- Substitute Algorithm
Further Reading
- Don't Repeat Yourself on the C2 Wiki
- Duplicated Code on SourceMaking
- Refactoring: Improving the Design of Existing Code by Martin Fowler. Duplicated Code, p76
Identical blocks of code found in 2 locations. Consider refactoring. Open
if ( m[2] && m[2][0] == '<' && m[2][m[2].length-1] == '>' )
m[2] = m[2].substring( 1, m[2].length - 1 );
- Read upRead up
Duplicated Code
Duplicated code can lead to software that is hard to understand and difficult to change. The Don't Repeat Yourself (DRY) principle states:
Every piece of knowledge must have a single, unambiguous, authoritative representation within a system.
When you violate DRY, bugs and maintenance problems are sure to follow. Duplicated code has a tendency to both continue to replicate and also to diverge (leaving bugs as two similar implementations differ in subtle ways).
Tuning
This issue has a mass of 88.
We set useful threshold defaults for the languages we support but you may want to adjust these settings based on your project guidelines.
The threshold configuration represents the minimum mass a code block must have to be analyzed for duplication. The lower the threshold, the more fine-grained the comparison.
If the engine is too easily reporting duplication, try raising the threshold. If you suspect that the engine isn't catching enough duplication, try lowering the threshold. The best setting tends to differ from language to language.
See codeclimate-duplication
's documentation for more information about tuning the mass threshold in your .codeclimate.yml
.
Refactorings
- Extract Method
- Extract Class
- Form Template Method
- Introduce Null Object
- Pull Up Method
- Pull Up Field
- Substitute Algorithm
Further Reading
- Don't Repeat Yourself on the C2 Wiki
- Duplicated Code on SourceMaking
- Refactoring: Improving the Design of Existing Code by Martin Fowler. Duplicated Code, p76
Function keyHandler
has 50 lines of code (exceeds 25 allowed). Consider refactoring. Open
function keyHandler(handleObj) {
if (typeof handleObj.data === "string") {
handleObj.data = {
keys: handleObj.data
};
Function link
has 50 lines of code (exceeds 25 allowed). Consider refactoring. Open
"[": function link( text ) {
var orig = String(text);
// Inline content is possible inside `link text`
var res = Markdown.DialectHelpers.inline_until_char.call( this, text.substr(1), ']' );
Function InstantHotkeys
has 39 lines of code (exceeds 25 allowed). Consider refactoring. Open
function InstantHotkeys() {
var bindings = [];
function sc(element, index, array) {
return element.startsWith('hk-');
Similar blocks of code found in 2 locations. Consider refactoring. Open
function last() {
console.log($('.active').html())
$('.active').parent().prev().find('a').click();
}
- Read upRead up
Duplicated Code
Duplicated code can lead to software that is hard to understand and difficult to change. The Don't Repeat Yourself (DRY) principle states:
Every piece of knowledge must have a single, unambiguous, authoritative representation within a system.
When you violate DRY, bugs and maintenance problems are sure to follow. Duplicated code has a tendency to both continue to replicate and also to diverge (leaving bugs as two similar implementations differ in subtle ways).
Tuning
This issue has a mass of 66.
We set useful threshold defaults for the languages we support but you may want to adjust these settings based on your project guidelines.
The threshold configuration represents the minimum mass a code block must have to be analyzed for duplication. The lower the threshold, the more fine-grained the comparison.
If the engine is too easily reporting duplication, try raising the threshold. If you suspect that the engine isn't catching enough duplication, try lowering the threshold. The best setting tends to differ from language to language.
See codeclimate-duplication
's documentation for more information about tuning the mass threshold in your .codeclimate.yml
.
Refactorings
- Extract Method
- Extract Class
- Form Template Method
- Introduce Null Object
- Pull Up Method
- Pull Up Field
- Substitute Algorithm
Further Reading
- Don't Repeat Yourself on the C2 Wiki
- Duplicated Code on SourceMaking
- Refactoring: Improving the Design of Existing Code by Martin Fowler. Duplicated Code, p76
Similar blocks of code found in 2 locations. Consider refactoring. Open
function next() {
console.log($('.active').html())
$('.active').parent().next().find('a').click();
}
- Read upRead up
Duplicated Code
Duplicated code can lead to software that is hard to understand and difficult to change. The Don't Repeat Yourself (DRY) principle states:
Every piece of knowledge must have a single, unambiguous, authoritative representation within a system.
When you violate DRY, bugs and maintenance problems are sure to follow. Duplicated code has a tendency to both continue to replicate and also to diverge (leaving bugs as two similar implementations differ in subtle ways).
Tuning
This issue has a mass of 66.
We set useful threshold defaults for the languages we support but you may want to adjust these settings based on your project guidelines.
The threshold configuration represents the minimum mass a code block must have to be analyzed for duplication. The lower the threshold, the more fine-grained the comparison.
If the engine is too easily reporting duplication, try raising the threshold. If you suspect that the engine isn't catching enough duplication, try lowering the threshold. The best setting tends to differ from language to language.
See codeclimate-duplication
's documentation for more information about tuning the mass threshold in your .codeclimate.yml
.
Refactorings
- Extract Method
- Extract Class
- Form Template Method
- Introduce Null Object
- Pull Up Method
- Pull Up Field
- Substitute Algorithm
Further Reading
- Don't Repeat Yourself on the C2 Wiki
- Duplicated Code on SourceMaking
- Refactoring: Improving the Design of Existing Code by Martin Fowler. Duplicated Code, p76
Function handler
has 38 lines of code (exceeds 25 allowed). Consider refactoring. Open
handleObj.handler = function(event) {
// Don't fire in text-accepting inputs that we didn't directly bind to
if (this !== event.target &&
(jQuery.hotkeys.options.filterInputAcceptingElements &&
jQuery.hotkeys.textInputTypes.test(event.target.nodeName) ||
Identical blocks of code found in 2 locations. Consider refactoring. Open
if ( m[0].length < block.length )
next.unshift( mk_block( block.substr( m[0].length ), block.trailing, block.lineNumber + 2 ) );
- Read upRead up
Duplicated Code
Duplicated code can lead to software that is hard to understand and difficult to change. The Don't Repeat Yourself (DRY) principle states:
Every piece of knowledge must have a single, unambiguous, authoritative representation within a system.
When you violate DRY, bugs and maintenance problems are sure to follow. Duplicated code has a tendency to both continue to replicate and also to diverge (leaving bugs as two similar implementations differ in subtle ways).
Tuning
This issue has a mass of 65.
We set useful threshold defaults for the languages we support but you may want to adjust these settings based on your project guidelines.
The threshold configuration represents the minimum mass a code block must have to be analyzed for duplication. The lower the threshold, the more fine-grained the comparison.
If the engine is too easily reporting duplication, try raising the threshold. If you suspect that the engine isn't catching enough duplication, try lowering the threshold. The best setting tends to differ from language to language.
See codeclimate-duplication
's documentation for more information about tuning the mass threshold in your .codeclimate.yml
.
Refactorings
- Extract Method
- Extract Class
- Form Template Method
- Introduce Null Object
- Pull Up Method
- Pull Up Field
- Substitute Algorithm
Further Reading
- Don't Repeat Yourself on the C2 Wiki
- Duplicated Code on SourceMaking
- Refactoring: Improving the Design of Existing Code by Martin Fowler. Duplicated Code, p76
Identical blocks of code found in 2 locations. Consider refactoring. Open
if ( m[0].length < block.length )
next.unshift( mk_block( block.substr( m[0].length ), block.trailing, block.lineNumber + 2 ) );
- Read upRead up
Duplicated Code
Duplicated code can lead to software that is hard to understand and difficult to change. The Don't Repeat Yourself (DRY) principle states:
Every piece of knowledge must have a single, unambiguous, authoritative representation within a system.
When you violate DRY, bugs and maintenance problems are sure to follow. Duplicated code has a tendency to both continue to replicate and also to diverge (leaving bugs as two similar implementations differ in subtle ways).
Tuning
This issue has a mass of 65.
We set useful threshold defaults for the languages we support but you may want to adjust these settings based on your project guidelines.
The threshold configuration represents the minimum mass a code block must have to be analyzed for duplication. The lower the threshold, the more fine-grained the comparison.
If the engine is too easily reporting duplication, try raising the threshold. If you suspect that the engine isn't catching enough duplication, try lowering the threshold. The best setting tends to differ from language to language.
See codeclimate-duplication
's documentation for more information about tuning the mass threshold in your .codeclimate.yml
.
Refactorings
- Extract Method
- Extract Class
- Form Template Method
- Introduce Null Object
- Pull Up Method
- Pull Up Field
- Substitute Algorithm
Further Reading
- Don't Repeat Yourself on the C2 Wiki
- Duplicated Code on SourceMaking
- Refactoring: Improving the Design of Existing Code by Martin Fowler. Duplicated Code, p76
Method retag
has 34 lines of code (exceeds 25 allowed). Consider refactoring. Open
def retag
encode = Encode.find(params[:id])
info = Tmdb::Movie.detail(params[:movie_id])
old_movie = Movie.find_by_id(encode.movie_id)
Function strong_em
has 30 lines of code (exceeds 25 allowed). Consider refactoring. Open
function strong_em( tag, md ) {
var state_slot = tag + "_state",
other_slot = tag == "strong" ? "em_state" : "strong_state";
Function block_meta
has 28 lines of code (exceeds 25 allowed). Consider refactoring. Open
Markdown.dialects.Maruku.block.block_meta = function block_meta( block, next ) {
// check if the last line of the block is an meta hash
var m = block.match( /(^|\n) {0,3}\{:\s*((?:\\\}|[^\}])*)\s*\}$/ );
if ( !m ) return undefined;
Function split_meta_hash
has 26 lines of code (exceeds 25 allowed). Consider refactoring. Open
function split_meta_hash( meta_string ) {
var meta = meta_string.split( "" ),
parts = [ "" ],
in_quotes = false;
Consider simplifying this complex logical expression. Open
if (this !== event.target &&
(jQuery.hotkeys.options.filterInputAcceptingElements &&
jQuery.hotkeys.textInputTypes.test(event.target.nodeName) ||
(jQuery.hotkeys.options.filterContentEditable && jQuery(event.target).attr('contenteditable')) ||
(jQuery.hotkeys.options.filterTextInputs &&