Function df
has a Cognitive Complexity of 224 (exceeds 5 allowed). Consider refactoring. Open
public static function df($df_param = "", $get_inodes = true)
{
$arrResult = array();
if (CommonFunctions::executeProgram('mount', '', $mount, PSI_DEBUG)) {
$mount = preg_split("/\n/", $mount, -1, PREG_SPLIT_NO_EMPTY);
- Read upRead up
Cognitive Complexity
Cognitive Complexity is a measure of how difficult a unit of code is to intuitively understand. Unlike Cyclomatic Complexity, which determines how difficult your code will be to test, Cognitive Complexity tells you how difficult your code will be to read and comprehend.
A method's cognitive complexity is based on a few simple rules:
- Code is not considered more complex when it uses shorthand that the language provides for collapsing multiple statements into one
- Code is considered more complex for each "break in the linear flow of the code"
- Code is considered more complex when "flow breaking structures are nested"
Further reading
Method df
has 186 lines of code (exceeds 25 allowed). Consider refactoring. Open
public static function df($df_param = "", $get_inodes = true)
{
$arrResult = array();
if (CommonFunctions::executeProgram('mount', '', $mount, PSI_DEBUG)) {
$mount = preg_split("/\n/", $mount, -1, PREG_SPLIT_NO_EMPTY);
The class Parser has an overall complexity of 62 which is very high. The configured complexity threshold is 50. Open
class Parser
{
/**
* parsing the output of lspci command
*
- Exclude checks
Avoid deeply nested control flow statements. Open
if (PSI_SHOW_MOUNT_OPTION && (trim($mount_param['options'])!=="")) {
if (PSI_SHOW_MOUNT_CREDENTIALS) {
$dev->setOptions($mount_param['options']);
} else {
$mpo=$mount_param['options'];
Avoid deeply nested control flow statements. Open
if ($mount_param['mountpoint']===$df_buf[5]) {
$dev->setFsType($mount_param['fstype']);
if (PSI_SHOW_MOUNT_OPTION && (trim($mount_param['options'])!=="")) {
if (PSI_SHOW_MOUNT_CREDENTIALS) {
$dev->setOptions($mount_param['options']);
Function lspci
has a Cognitive Complexity of 7 (exceeds 5 allowed). Consider refactoring. Open
public static function lspci($debug = PSI_DEBUG)
{
$arrResults = array();
if (CommonFunctions::executeProgram("lspci", "", $strBuf, $debug)) {
$arrLines = preg_split("/\n/", $strBuf, -1, PREG_SPLIT_NO_EMPTY);
- Read upRead up
Cognitive Complexity
Cognitive Complexity is a measure of how difficult a unit of code is to intuitively understand. Unlike Cyclomatic Complexity, which determines how difficult your code will be to test, Cognitive Complexity tells you how difficult your code will be to read and comprehend.
A method's cognitive complexity is based on a few simple rules:
- Code is not considered more complex when it uses shorthand that the language provides for collapsing multiple statements into one
- Code is considered more complex for each "break in the linear flow of the code"
- Code is considered more complex when "flow breaking structures are nested"
Further reading
The method df() has an NPath complexity of 922752. The configured NPath complexity threshold is 200. Open
public static function df($df_param = "", $get_inodes = true)
{
$arrResult = array();
if (CommonFunctions::executeProgram('mount', '', $mount, PSI_DEBUG)) {
$mount = preg_split("/\n/", $mount, -1, PREG_SPLIT_NO_EMPTY);
- Read upRead up
- Exclude checks
NPathComplexity
Since: 0.1
The NPath complexity of a method is the number of acyclic execution paths through that method. A threshold of 200 is generally considered the point where measures should be taken to reduce complexity.
Example
class Foo {
function bar() {
// lots of complicated code
}
}
Source https://phpmd.org/rules/codesize.html#npathcomplexity
The method df() has 212 lines of code. Current threshold is set to 100. Avoid really long methods. Open
public static function df($df_param = "", $get_inodes = true)
{
$arrResult = array();
if (CommonFunctions::executeProgram('mount', '', $mount, PSI_DEBUG)) {
$mount = preg_split("/\n/", $mount, -1, PREG_SPLIT_NO_EMPTY);
- Exclude checks
The method df() has a Cyclomatic Complexity of 58. The configured cyclomatic complexity threshold is 10. Open
public static function df($df_param = "", $get_inodes = true)
{
$arrResult = array();
if (CommonFunctions::executeProgram('mount', '', $mount, PSI_DEBUG)) {
$mount = preg_split("/\n/", $mount, -1, PREG_SPLIT_NO_EMPTY);
- Read upRead up
- Exclude checks
CyclomaticComplexity
Since: 0.1
Complexity is determined by the number of decision points in a method plus one for the method entry. The decision points are 'if', 'while', 'for', and 'case labels'. Generally, 1-4 is low complexity, 5-7 indicates moderate complexity, 8-10 is high complexity, and 11+ is very high complexity.
Example
// Cyclomatic Complexity = 11
class Foo {
1 public function example() {
2 if ($a == $b) {
3 if ($a1 == $b1) {
fiddle();
4 } elseif ($a2 == $b2) {
fiddle();
} else {
fiddle();
}
5 } elseif ($c == $d) {
6 while ($c == $d) {
fiddle();
}
7 } elseif ($e == $f) {
8 for ($n = 0; $n < $h; $n++) {
fiddle();
}
} else {
switch ($z) {
9 case 1:
fiddle();
break;
10 case 2:
fiddle();
break;
11 case 3:
fiddle();
break;
default:
fiddle();
break;
}
}
}
}
Source https://phpmd.org/rules/codesize.html#cyclomaticcomplexity
Avoid using undefined variables such as '$df_inodes' which will lead to PHP notices. Open
$dev->setPercentInodesUsed($df_inodes[trim($df_buf[0])]);
- Read upRead up
- Exclude checks
UndefinedVariable
Since: 2.8.0
Detects when a variable is used that has not been defined before.
Example
class Foo
{
private function bar()
{
// $message is undefined
echo $message;
}
}
Source https://phpmd.org/rules/cleancode.html#undefinedvariable
Avoid using undefined variables such as '$strBuf' which will lead to PHP notices. Open
$arrLines = preg_split("/\n/", $strBuf, -1, PREG_SPLIT_NO_EMPTY);
- Read upRead up
- Exclude checks
UndefinedVariable
Since: 2.8.0
Detects when a variable is used that has not been defined before.
Example
class Foo
{
private function bar()
{
// $message is undefined
echo $message;
}
}
Source https://phpmd.org/rules/cleancode.html#undefinedvariable
Avoid using undefined variables such as '$strBuf' which will lead to PHP notices. Open
if (CommonFunctions::executeProgram("lspci", "", $strBuf, $debug)) {
- Read upRead up
- Exclude checks
UndefinedVariable
Since: 2.8.0
Detects when a variable is used that has not been defined before.
Example
class Foo
{
private function bar()
{
// $message is undefined
echo $message;
}
}
Source https://phpmd.org/rules/cleancode.html#undefinedvariable
Avoid using undefined variables such as '$df_inodes' which will lead to PHP notices. Open
$df_inodes[$inode_buf[1]] = $inode_buf[2];
- Read upRead up
- Exclude checks
UndefinedVariable
Since: 2.8.0
Detects when a variable is used that has not been defined before.
Example
class Foo
{
private function bar()
{
// $message is undefined
echo $message;
}
}
Source https://phpmd.org/rules/cleancode.html#undefinedvariable
Avoid using undefined variables such as '$df_inodes' which will lead to PHP notices. Open
if ($get_inodes && PSI_SHOW_INODES && isset($df_inodes[trim($df_buf[0])])) {
- Read upRead up
- Exclude checks
UndefinedVariable
Since: 2.8.0
Detects when a variable is used that has not been defined before.
Example
class Foo
{
private function bar()
{
// $message is undefined
echo $message;
}
}
Source https://phpmd.org/rules/cleancode.html#undefinedvariable
Missing class import via use statement (line '139', column '36'). Open
$dev = new DiskDevice();
- Read upRead up
- Exclude checks
MissingImport
Since: 2.7.0
Importing all external classes in a file through use statements makes them clearly visible.
Example
function make() {
return new \stdClass();
}
Source http://phpmd.org/rules/cleancode.html#MissingImport
The method df has a boolean flag argument $get_inodes, which is a certain sign of a Single Responsibility Principle violation. Open
public static function df($df_param = "", $get_inodes = true)
- Read upRead up
- Exclude checks
BooleanArgumentFlag
Since: 1.4.0
A boolean flag argument is a reliable indicator for a violation of the Single Responsibility Principle (SRP). You can fix this problem by extracting the logic in the boolean flag into its own class or method.
Example
class Foo {
public function bar($flag = true) {
}
}
Source https://phpmd.org/rules/cleancode.html#booleanargumentflag
Missing class import via use statement (line '46', column '28'). Open
$dev = new HWDevice();
- Read upRead up
- Exclude checks
MissingImport
Since: 2.7.0
Importing all external classes in a file through use statements makes them clearly visible.
Example
function make() {
return new \stdClass();
}
Source http://phpmd.org/rules/cleancode.html#MissingImport
Missing class import via use statement (line '230', column '40'). Open
$dev = new DiskDevice();
- Read upRead up
- Exclude checks
MissingImport
Since: 2.7.0
Importing all external classes in a file through use statements makes them clearly visible.
Example
function make() {
return new \stdClass();
}
Source http://phpmd.org/rules/cleancode.html#MissingImport
Avoid using static access to class 'CommonFunctions' in method 'df'. Open
} elseif (CommonFunctions::rfts("/etc/mtab", $mount)) {
- Read upRead up
- Exclude checks
StaticAccess
Since: 1.4.0
Static access causes unexchangeable dependencies to other classes and leads to hard to test code. Avoid using static access at all costs and instead inject dependencies through the constructor. The only case when static access is acceptable is when used for factory methods.
Example
class Foo
{
public function bar()
{
Bar::baz();
}
}
Source https://phpmd.org/rules/cleancode.html#staticaccess
The method df uses an else expression. Else clauses are basically not necessary and you can simplify the code by not using them. Open
} else {
$mpo=$mount_param['options'];
$mpo=preg_replace('/(^guest,)|(^guest$)|(,guest$)/i', '', $mpo);
$mpo=preg_replace('/,guest,/i', ',', $mpo);
- Read upRead up
- Exclude checks
ElseExpression
Since: 1.4.0
An if expression with an else branch is basically not necessary. You can rewrite the conditions in a way that the else clause is not necessary and the code becomes simpler to read. To achieve this, use early return statements, though you may need to split the code it several smaller methods. For very simple assignments you could also use the ternary operations.
Example
class Foo
{
public function bar($flag)
{
if ($flag) {
// one branch
} else {
// another branch
}
}
}
Source https://phpmd.org/rules/cleancode.html#elseexpression
The method df uses an else expression. Else clauses are basically not necessary and you can simplify the code by not using them. Open
} else {
if (isset($mount_parm)) {
foreach ($mount_parm as $mount_param) {
if (is_dir($mount_param['mountpoint'])) {
$total = disk_total_space($mount_param['mountpoint']);
- Read upRead up
- Exclude checks
ElseExpression
Since: 1.4.0
An if expression with an else branch is basically not necessary. You can rewrite the conditions in a way that the else clause is not necessary and the code becomes simpler to read. To achieve this, use early return statements, though you may need to split the code it several smaller methods. For very simple assignments you could also use the ternary operations.
Example
class Foo
{
public function bar($flag)
{
if ($flag) {
// one branch
} else {
// another branch
}
}
}
Source https://phpmd.org/rules/cleancode.html#elseexpression
Avoid using static access to class 'CommonFunctions' in method 'df'. Open
if (CommonFunctions::executeProgram('df', '-k '.$df_param, $df, PSI_DEBUG) && ($df!=="")) {
- Read upRead up
- Exclude checks
StaticAccess
Since: 1.4.0
Static access causes unexchangeable dependencies to other classes and leads to hard to test code. Avoid using static access at all costs and instead inject dependencies through the constructor. The only case when static access is acceptable is when used for factory methods.
Example
class Foo
{
public function bar()
{
Bar::baz();
}
}
Source https://phpmd.org/rules/cleancode.html#staticaccess
Avoid using static access to class 'CommonFunctions' in method 'lspci'. Open
if (CommonFunctions::executeProgram("lspci", "", $strBuf, $debug)) {
- Read upRead up
- Exclude checks
StaticAccess
Since: 1.4.0
Static access causes unexchangeable dependencies to other classes and leads to hard to test code. Avoid using static access at all costs and instead inject dependencies through the constructor. The only case when static access is acceptable is when used for factory methods.
Example
class Foo
{
public function bar()
{
Bar::baz();
}
}
Source https://phpmd.org/rules/cleancode.html#staticaccess
The method df uses an else expression. Else clauses are basically not necessary and you can simplify the code by not using them. Open
} else {
$mpo=$mount_param['options'];
$mpo=preg_replace('/(^guest,)|(^guest$)|(,guest$)/i', '', $mpo);
$mpo=preg_replace('/,guest,/i', ',', $mpo);
- Read upRead up
- Exclude checks
ElseExpression
Since: 1.4.0
An if expression with an else branch is basically not necessary. You can rewrite the conditions in a way that the else clause is not necessary and the code becomes simpler to read. To achieve this, use early return statements, though you may need to split the code it several smaller methods. For very simple assignments you could also use the ternary operations.
Example
class Foo
{
public function bar($flag)
{
if ($flag) {
// one branch
} else {
// another branch
}
}
}
Source https://phpmd.org/rules/cleancode.html#elseexpression
The method df uses an else expression. Else clauses are basically not necessary and you can simplify the code by not using them. Open
} else {
$df_buf = array($df_buf2[1], $df_buf2[4], $df_buf2[6], $df_buf2[8], $df_buf2[10], $df_buf1[1]);
}
- Read upRead up
- Exclude checks
ElseExpression
Since: 1.4.0
An if expression with an else branch is basically not necessary. You can rewrite the conditions in a way that the else clause is not necessary and the code becomes simpler to read. To achieve this, use early return statements, though you may need to split the code it several smaller methods. For very simple assignments you could also use the ternary operations.
Example
class Foo
{
public function bar($flag)
{
if ($flag) {
// one branch
} else {
// another branch
}
}
}
Source https://phpmd.org/rules/cleancode.html#elseexpression
The method df uses an else expression. Else clauses are basically not necessary and you can simplify the code by not using them. Open
} else {
$mpo=$mount_param['options'];
$mpo=preg_replace('/(^guest,)|(^guest$)|(,guest$)/i', '', $mpo);
$mpo=preg_replace('/,guest,/i', ',', $mpo);
- Read upRead up
- Exclude checks
ElseExpression
Since: 1.4.0
An if expression with an else branch is basically not necessary. You can rewrite the conditions in a way that the else clause is not necessary and the code becomes simpler to read. To achieve this, use early return statements, though you may need to split the code it several smaller methods. For very simple assignments you could also use the ternary operations.
Example
class Foo
{
public function bar($flag)
{
if ($flag) {
// one branch
} else {
// another branch
}
}
}
Source https://phpmd.org/rules/cleancode.html#elseexpression
The method df uses an else expression. Else clauses are basically not necessary and you can simplify the code by not using them. Open
} else {
$dev->setTotal($df_buf[1] * 1024);
$dev->setUsed($df_buf[2] * 1024);
if ($df_buf[3]>0) {
$dev->setFree($df_buf[3] * 1024);
- Read upRead up
- Exclude checks
ElseExpression
Since: 1.4.0
An if expression with an else branch is basically not necessary. You can rewrite the conditions in a way that the else clause is not necessary and the code becomes simpler to read. To achieve this, use early return statements, though you may need to split the code it several smaller methods. For very simple assignments you could also use the ternary operations.
Example
class Foo
{
public function bar($flag)
{
if ($flag) {
// one branch
} else {
// another branch
}
}
}
Source https://phpmd.org/rules/cleancode.html#elseexpression
Avoid using static access to class 'CommonFunctions' in method 'df'. Open
if (CommonFunctions::executeProgram('mount', '', $mount, PSI_DEBUG)) {
- Read upRead up
- Exclude checks
StaticAccess
Since: 1.4.0
Static access causes unexchangeable dependencies to other classes and leads to hard to test code. Avoid using static access at all costs and instead inject dependencies through the constructor. The only case when static access is acceptable is when used for factory methods.
Example
class Foo
{
public function bar()
{
Bar::baz();
}
}
Source https://phpmd.org/rules/cleancode.html#staticaccess
Avoid using static access to class 'CommonFunctions' in method 'df'. Open
if (CommonFunctions::executeProgram('df', '-i '.$df_param, $df2, PSI_DEBUG)) {
- Read upRead up
- Exclude checks
StaticAccess
Since: 1.4.0
Static access causes unexchangeable dependencies to other classes and leads to hard to test code. Avoid using static access at all costs and instead inject dependencies through the constructor. The only case when static access is acceptable is when used for factory methods.
Example
class Foo
{
public function bar()
{
Bar::baz();
}
}
Source https://phpmd.org/rules/cleancode.html#staticaccess
The method df uses an else expression. Else clauses are basically not necessary and you can simplify the code by not using them. Open
} else {
$free = 0;
}
- Read upRead up
- Exclude checks
ElseExpression
Since: 1.4.0
An if expression with an else branch is basically not necessary. You can rewrite the conditions in a way that the else clause is not necessary and the code becomes simpler to read. To achieve this, use early return statements, though you may need to split the code it several smaller methods. For very simple assignments you could also use the ternary operations.
Example
class Foo
{
public function bar($flag)
{
if ($flag) {
// one branch
} else {
// another branch
}
}
}
Source https://phpmd.org/rules/cleancode.html#elseexpression
Identical blocks of code found in 2 locations. Consider refactoring. Open
if ($mount_param['mountpoint']===$df_buf[5]) {
$dev->setFsType($mount_param['fstype']);
if (PSI_SHOW_MOUNT_OPTION && (trim($mount_param['options'])!=="")) {
if (PSI_SHOW_MOUNT_CREDENTIALS) {
$dev->setOptions($mount_param['options']);
- Read upRead up
Duplicated Code
Duplicated code can lead to software that is hard to understand and difficult to change. The Don't Repeat Yourself (DRY) principle states:
Every piece of knowledge must have a single, unambiguous, authoritative representation within a system.
When you violate DRY, bugs and maintenance problems are sure to follow. Duplicated code has a tendency to both continue to replicate and also to diverge (leaving bugs as two similar implementations differ in subtle ways).
Tuning
This issue has a mass of 256.
We set useful threshold defaults for the languages we support but you may want to adjust these settings based on your project guidelines.
The threshold configuration represents the minimum mass a code block must have to be analyzed for duplication. The lower the threshold, the more fine-grained the comparison.
If the engine is too easily reporting duplication, try raising the threshold. If you suspect that the engine isn't catching enough duplication, try lowering the threshold. The best setting tends to differ from language to language.
See codeclimate-duplication
's documentation for more information about tuning the mass threshold in your .codeclimate.yml
.
Refactorings
- Extract Method
- Extract Class
- Form Template Method
- Introduce Null Object
- Pull Up Method
- Pull Up Field
- Substitute Algorithm
Further Reading
- Don't Repeat Yourself on the C2 Wiki
- Duplicated Code on SourceMaking
- Refactoring: Improving the Design of Existing Code by Martin Fowler. Duplicated Code, p76
Identical blocks of code found in 2 locations. Consider refactoring. Open
if (($mount_param['name']===trim($df_buf[0])) && ($mount_param['mountpoint']===$df_buf[5])) {
$dev->setFsType($mount_param['fstype']);
if (PSI_SHOW_MOUNT_OPTION && (trim($mount_param['options'])!=="")) {
if (PSI_SHOW_MOUNT_CREDENTIALS) {
$dev->setOptions($mount_param['options']);
- Read upRead up
Duplicated Code
Duplicated code can lead to software that is hard to understand and difficult to change. The Don't Repeat Yourself (DRY) principle states:
Every piece of knowledge must have a single, unambiguous, authoritative representation within a system.
When you violate DRY, bugs and maintenance problems are sure to follow. Duplicated code has a tendency to both continue to replicate and also to diverge (leaving bugs as two similar implementations differ in subtle ways).
Tuning
This issue has a mass of 256.
We set useful threshold defaults for the languages we support but you may want to adjust these settings based on your project guidelines.
The threshold configuration represents the minimum mass a code block must have to be analyzed for duplication. The lower the threshold, the more fine-grained the comparison.
If the engine is too easily reporting duplication, try raising the threshold. If you suspect that the engine isn't catching enough duplication, try lowering the threshold. The best setting tends to differ from language to language.
See codeclimate-duplication
's documentation for more information about tuning the mass threshold in your .codeclimate.yml
.
Refactorings
- Extract Method
- Extract Class
- Form Template Method
- Introduce Null Object
- Pull Up Method
- Pull Up Field
- Substitute Algorithm
Further Reading
- Don't Repeat Yourself on the C2 Wiki
- Duplicated Code on SourceMaking
- Refactoring: Improving the Design of Existing Code by Martin Fowler. Duplicated Code, p76
Similar blocks of code found in 2 locations. Consider refactoring. Open
foreach ($arrLines as $strLine) {
$arrParams = preg_split('/ /', trim($strLine), 2);
if (count($arrParams) == 2)
$strName = $arrParams[1];
else
- Read upRead up
Duplicated Code
Duplicated code can lead to software that is hard to understand and difficult to change. The Don't Repeat Yourself (DRY) principle states:
Every piece of knowledge must have a single, unambiguous, authoritative representation within a system.
When you violate DRY, bugs and maintenance problems are sure to follow. Duplicated code has a tendency to both continue to replicate and also to diverge (leaving bugs as two similar implementations differ in subtle ways).
Tuning
This issue has a mass of 119.
We set useful threshold defaults for the languages we support but you may want to adjust these settings based on your project guidelines.
The threshold configuration represents the minimum mass a code block must have to be analyzed for duplication. The lower the threshold, the more fine-grained the comparison.
If the engine is too easily reporting duplication, try raising the threshold. If you suspect that the engine isn't catching enough duplication, try lowering the threshold. The best setting tends to differ from language to language.
See codeclimate-duplication
's documentation for more information about tuning the mass threshold in your .codeclimate.yml
.
Refactorings
- Extract Method
- Extract Class
- Form Template Method
- Introduce Null Object
- Pull Up Method
- Pull Up Field
- Substitute Algorithm
Further Reading
- Don't Repeat Yourself on the C2 Wiki
- Duplicated Code on SourceMaking
- Refactoring: Improving the Design of Existing Code by Martin Fowler. Duplicated Code, p76
Similar blocks of code found in 2 locations. Consider refactoring. Open
} elseif (preg_match("/(\S+) (.*) on (\S+) \((.*)\)/", $mount_line, $mount_buf)) {
$parm = array();
$parm['mountpoint'] = trim($mount_buf[3]);
$parm['fstype'] = $mount_buf[2];
$parm['name'] = $mount_buf[1];
- Read upRead up
Duplicated Code
Duplicated code can lead to software that is hard to understand and difficult to change. The Don't Repeat Yourself (DRY) principle states:
Every piece of knowledge must have a single, unambiguous, authoritative representation within a system.
When you violate DRY, bugs and maintenance problems are sure to follow. Duplicated code has a tendency to both continue to replicate and also to diverge (leaving bugs as two similar implementations differ in subtle ways).
Tuning
This issue has a mass of 109.
We set useful threshold defaults for the languages we support but you may want to adjust these settings based on your project guidelines.
The threshold configuration represents the minimum mass a code block must have to be analyzed for duplication. The lower the threshold, the more fine-grained the comparison.
If the engine is too easily reporting duplication, try raising the threshold. If you suspect that the engine isn't catching enough duplication, try lowering the threshold. The best setting tends to differ from language to language.
See codeclimate-duplication
's documentation for more information about tuning the mass threshold in your .codeclimate.yml
.
Refactorings
- Extract Method
- Extract Class
- Form Template Method
- Introduce Null Object
- Pull Up Method
- Pull Up Field
- Substitute Algorithm
Further Reading
- Don't Repeat Yourself on the C2 Wiki
- Duplicated Code on SourceMaking
- Refactoring: Improving the Design of Existing Code by Martin Fowler. Duplicated Code, p76
Similar blocks of code found in 2 locations. Consider refactoring. Open
} elseif (preg_match("/(\S+) is (.*) mounted on (\S+) \(type (.*)\)/", $mount_line, $mount_buf)) {
$parm = array();
$parm['mountpoint'] = trim($mount_buf[3]);
$parm['fstype'] = $mount_buf[4];
$parm['name'] = $mount_buf[1];
- Read upRead up
Duplicated Code
Duplicated code can lead to software that is hard to understand and difficult to change. The Don't Repeat Yourself (DRY) principle states:
Every piece of knowledge must have a single, unambiguous, authoritative representation within a system.
When you violate DRY, bugs and maintenance problems are sure to follow. Duplicated code has a tendency to both continue to replicate and also to diverge (leaving bugs as two similar implementations differ in subtle ways).
Tuning
This issue has a mass of 109.
We set useful threshold defaults for the languages we support but you may want to adjust these settings based on your project guidelines.
The threshold configuration represents the minimum mass a code block must have to be analyzed for duplication. The lower the threshold, the more fine-grained the comparison.
If the engine is too easily reporting duplication, try raising the threshold. If you suspect that the engine isn't catching enough duplication, try lowering the threshold. The best setting tends to differ from language to language.
See codeclimate-duplication
's documentation for more information about tuning the mass threshold in your .codeclimate.yml
.
Refactorings
- Extract Method
- Extract Class
- Form Template Method
- Introduce Null Object
- Pull Up Method
- Pull Up Field
- Substitute Algorithm
Further Reading
- Don't Repeat Yourself on the C2 Wiki
- Duplicated Code on SourceMaking
- Refactoring: Improving the Design of Existing Code by Martin Fowler. Duplicated Code, p76
Avoid using short method names like Parser::df(). The configured minimum method name length is 3. Open
public static function df($df_param = "", $get_inodes = true)
{
$arrResult = array();
if (CommonFunctions::executeProgram('mount', '', $mount, PSI_DEBUG)) {
$mount = preg_split("/\n/", $mount, -1, PREG_SPLIT_NO_EMPTY);
- Read upRead up
- Exclude checks
ShortMethodName
Since: 0.2
Detects when very short method names are used.
Example
class ShortMethod {
public function a( $index ) { // Violation
}
}
Source https://phpmd.org/rules/naming.html#shortmethodname
Each class must be in a namespace of at least one level (a top-level vendor name) Open
class Parser
- Exclude checks
The parameter $get_inodes is not named in camelCase. Open
public static function df($df_param = "", $get_inodes = true)
{
$arrResult = array();
if (CommonFunctions::executeProgram('mount', '', $mount, PSI_DEBUG)) {
$mount = preg_split("/\n/", $mount, -1, PREG_SPLIT_NO_EMPTY);
- Read upRead up
- Exclude checks
CamelCaseParameterName
Since: 0.2
It is considered best practice to use the camelCase notation to name parameters.
Example
class ClassName {
public function doSomething($user_name) {
}
}
Source
The parameter $df_param is not named in camelCase. Open
public static function df($df_param = "", $get_inodes = true)
{
$arrResult = array();
if (CommonFunctions::executeProgram('mount', '', $mount, PSI_DEBUG)) {
$mount = preg_split("/\n/", $mount, -1, PREG_SPLIT_NO_EMPTY);
- Read upRead up
- Exclude checks
CamelCaseParameterName
Since: 0.2
It is considered best practice to use the camelCase notation to name parameters.
Example
class ClassName {
public function doSomething($user_name) {
}
}
Source
Inline control structures are not allowed Open
if (count($arrParams) == 2)
- Exclude checks
Inline control structures are not allowed Open
if (PSI_SHOW_MOUNT_OPTION) $parm['options'] = isset($mount_buf[5]) ? $mount_buf[5] : '';
- Exclude checks
Line exceeds 120 characters; contains 123 characters Open
$mpo=preg_replace('/(^user=[^,]*,)|(^user=[^,]*$)|(,user=[^,]*$)/i', '', $mpo);
- Exclude checks
Inline control structures are not allowed Open
if (PSI_SHOW_MOUNT_POINT) $dev->setMountPoint($df_buf[5]);
- Exclude checks
Line exceeds 120 characters; contains 135 characters Open
$mpo=preg_replace('/(^username=[^,]*,)|(^username=[^,]*$)|(,username=[^,]*$)/i', '', $mpo);
- Exclude checks
Line exceeds 120 characters; contains 132 characters Open
* @license http://opensource.org/licenses/gpl-2.0.php GNU General Public License version 2, or (at your option) any later version
- Exclude checks
Line exceeds 120 characters; contains 123 characters Open
$mpo=preg_replace('/(^user=[^,]*,)|(^user=[^,]*$)|(,user=[^,]*$)/i', '', $mpo);
- Exclude checks
Inline control structures are not allowed Open
if (PSI_SHOW_MOUNT_POINT) $dev->setMountPoint($mount_param['mountpoint']);
- Exclude checks
Line exceeds 120 characters; contains 127 characters Open
$mpo=preg_replace('/(^username=[^,]*,)|(^username=[^,]*$)|(,username=[^,]*$)/i', '', $mpo);
- Exclude checks
Inline control structures are not allowed Open
if (PSI_SHOW_MOUNT_OPTION) $parm['options'] = $mount_buf[4];
- Exclude checks
Inline control structures are not allowed Open
if (PSI_SHOW_MOUNT_OPTION) $parm['options'] = $mount_buf[4];
- Exclude checks
Line exceeds 120 characters; contains 123 characters Open
if (preg_match("/(.*)(\s+)(([0-9]+)(\s+)([0-9]+)(\s+)([\-0-9]+)(\s+)([0-9]+)$)/", $df_buf1[0], $df_buf2)) {
- Exclude checks
Line exceeds 120 characters; contains 125 characters Open
if (($mount_param['name']===trim($df_buf[0])) && ($mount_param['mountpoint']===$df_buf[5])) {
- Exclude checks
Line exceeds 120 characters; contains 132 characters Open
* @license http://opensource.org/licenses/gpl-2.0.php GNU General Public License version 2, or (at your option) any later version
- Exclude checks
Line exceeds 120 characters; contains 135 characters Open
$mpo=preg_replace('/(^username=[^,]*,)|(^username=[^,]*$)|(,username=[^,]*$)/i', '', $mpo);
- Exclude checks
Inline control structures are not allowed Open
if ($notwas) foreach ($mount_parm as $mount_param) { //mountpoint find
- Exclude checks
Line exceeds 120 characters; contains 135 characters Open
$mpo=preg_replace('/(^password=[^,]*,)|(^password=[^,]*$)|(,password=[^,]*$)/i', '', $mpo);
- Exclude checks
Inline control structures are not allowed Open
if (PSI_SHOW_MOUNT_OPTION) $parm['options'] = $mount_buf[2];
- Exclude checks
Inline control structures are not allowed Open
if (PSI_SHOW_MOUNT_OPTION) $parm['options'] = $mount_buf[4];
- Exclude checks
Line exceeds 120 characters; contains 127 characters Open
$mpo=preg_replace('/(^password=[^,]*,)|(^password=[^,]*$)|(,password=[^,]*$)/i', '', $mpo);
- Exclude checks
Inline control structures are not allowed Open
else
- Exclude checks
Line exceeds 120 characters; contains 135 characters Open
$mpo=preg_replace('/(^password=[^,]*,)|(^password=[^,]*$)|(,password=[^,]*$)/i', '', $mpo);
- Exclude checks
Inline control structures are not allowed Open
if ($total > $free) $dev->setUsed($total - $free);
- Exclude checks
Expected 1 space after ELSE keyword; newline found Open
else
- Exclude checks
The variable $mount_buf is not named in camelCase. Open
public static function df($df_param = "", $get_inodes = true)
{
$arrResult = array();
if (CommonFunctions::executeProgram('mount', '', $mount, PSI_DEBUG)) {
$mount = preg_split("/\n/", $mount, -1, PREG_SPLIT_NO_EMPTY);
- Read upRead up
- Exclude checks
CamelCaseVariableName
Since: 0.2
It is considered best practice to use the camelCase notation to name variables.
Example
class ClassName {
public function doSomething() {
$data_module = new DataModule();
}
}
Source
The variable $mount_buf is not named in camelCase. Open
public static function df($df_param = "", $get_inodes = true)
{
$arrResult = array();
if (CommonFunctions::executeProgram('mount', '', $mount, PSI_DEBUG)) {
$mount = preg_split("/\n/", $mount, -1, PREG_SPLIT_NO_EMPTY);
- Read upRead up
- Exclude checks
CamelCaseVariableName
Since: 0.2
It is considered best practice to use the camelCase notation to name variables.
Example
class ClassName {
public function doSomething() {
$data_module = new DataModule();
}
}
Source
The variable $mount_buf is not named in camelCase. Open
public static function df($df_param = "", $get_inodes = true)
{
$arrResult = array();
if (CommonFunctions::executeProgram('mount', '', $mount, PSI_DEBUG)) {
$mount = preg_split("/\n/", $mount, -1, PREG_SPLIT_NO_EMPTY);
- Read upRead up
- Exclude checks
CamelCaseVariableName
Since: 0.2
It is considered best practice to use the camelCase notation to name variables.
Example
class ClassName {
public function doSomething() {
$data_module = new DataModule();
}
}
Source
The variable $df2_line is not named in camelCase. Open
public static function df($df_param = "", $get_inodes = true)
{
$arrResult = array();
if (CommonFunctions::executeProgram('mount', '', $mount, PSI_DEBUG)) {
$mount = preg_split("/\n/", $mount, -1, PREG_SPLIT_NO_EMPTY);
- Read upRead up
- Exclude checks
CamelCaseVariableName
Since: 0.2
It is considered best practice to use the camelCase notation to name variables.
Example
class ClassName {
public function doSomething() {
$data_module = new DataModule();
}
}
Source
The variable $df_buf2 is not named in camelCase. Open
public static function df($df_param = "", $get_inodes = true)
{
$arrResult = array();
if (CommonFunctions::executeProgram('mount', '', $mount, PSI_DEBUG)) {
$mount = preg_split("/\n/", $mount, -1, PREG_SPLIT_NO_EMPTY);
- Read upRead up
- Exclude checks
CamelCaseVariableName
Since: 0.2
It is considered best practice to use the camelCase notation to name variables.
Example
class ClassName {
public function doSomething() {
$data_module = new DataModule();
}
}
Source
The variable $df_buf1 is not named in camelCase. Open
public static function df($df_param = "", $get_inodes = true)
{
$arrResult = array();
if (CommonFunctions::executeProgram('mount', '', $mount, PSI_DEBUG)) {
$mount = preg_split("/\n/", $mount, -1, PREG_SPLIT_NO_EMPTY);
- Read upRead up
- Exclude checks
CamelCaseVariableName
Since: 0.2
It is considered best practice to use the camelCase notation to name variables.
Example
class ClassName {
public function doSomething() {
$data_module = new DataModule();
}
}
Source
The variable $mount_param is not named in camelCase. Open
public static function df($df_param = "", $get_inodes = true)
{
$arrResult = array();
if (CommonFunctions::executeProgram('mount', '', $mount, PSI_DEBUG)) {
$mount = preg_split("/\n/", $mount, -1, PREG_SPLIT_NO_EMPTY);
- Read upRead up
- Exclude checks
CamelCaseVariableName
Since: 0.2
It is considered best practice to use the camelCase notation to name variables.
Example
class ClassName {
public function doSomething() {
$data_module = new DataModule();
}
}
Source
The variable $mount_param is not named in camelCase. Open
public static function df($df_param = "", $get_inodes = true)
{
$arrResult = array();
if (CommonFunctions::executeProgram('mount', '', $mount, PSI_DEBUG)) {
$mount = preg_split("/\n/", $mount, -1, PREG_SPLIT_NO_EMPTY);
- Read upRead up
- Exclude checks
CamelCaseVariableName
Since: 0.2
It is considered best practice to use the camelCase notation to name variables.
Example
class ClassName {
public function doSomething() {
$data_module = new DataModule();
}
}
Source
The variable $mount_line is not named in camelCase. Open
public static function df($df_param = "", $get_inodes = true)
{
$arrResult = array();
if (CommonFunctions::executeProgram('mount', '', $mount, PSI_DEBUG)) {
$mount = preg_split("/\n/", $mount, -1, PREG_SPLIT_NO_EMPTY);
- Read upRead up
- Exclude checks
CamelCaseVariableName
Since: 0.2
It is considered best practice to use the camelCase notation to name variables.
Example
class ClassName {
public function doSomething() {
$data_module = new DataModule();
}
}
Source
The variable $mount_buf is not named in camelCase. Open
public static function df($df_param = "", $get_inodes = true)
{
$arrResult = array();
if (CommonFunctions::executeProgram('mount', '', $mount, PSI_DEBUG)) {
$mount = preg_split("/\n/", $mount, -1, PREG_SPLIT_NO_EMPTY);
- Read upRead up
- Exclude checks
CamelCaseVariableName
Since: 0.2
It is considered best practice to use the camelCase notation to name variables.
Example
class ClassName {
public function doSomething() {
$data_module = new DataModule();
}
}
Source
The variable $mount_line is not named in camelCase. Open
public static function df($df_param = "", $get_inodes = true)
{
$arrResult = array();
if (CommonFunctions::executeProgram('mount', '', $mount, PSI_DEBUG)) {
$mount = preg_split("/\n/", $mount, -1, PREG_SPLIT_NO_EMPTY);
- Read upRead up
- Exclude checks
CamelCaseVariableName
Since: 0.2
It is considered best practice to use the camelCase notation to name variables.
Example
class ClassName {
public function doSomething() {
$data_module = new DataModule();
}
}
Source
The variable $mount_buf is not named in camelCase. Open
public static function df($df_param = "", $get_inodes = true)
{
$arrResult = array();
if (CommonFunctions::executeProgram('mount', '', $mount, PSI_DEBUG)) {
$mount = preg_split("/\n/", $mount, -1, PREG_SPLIT_NO_EMPTY);
- Read upRead up
- Exclude checks
CamelCaseVariableName
Since: 0.2
It is considered best practice to use the camelCase notation to name variables.
Example
class ClassName {
public function doSomething() {
$data_module = new DataModule();
}
}
Source
The variable $mount_parm is not named in camelCase. Open
public static function df($df_param = "", $get_inodes = true)
{
$arrResult = array();
if (CommonFunctions::executeProgram('mount', '', $mount, PSI_DEBUG)) {
$mount = preg_split("/\n/", $mount, -1, PREG_SPLIT_NO_EMPTY);
- Read upRead up
- Exclude checks
CamelCaseVariableName
Since: 0.2
It is considered best practice to use the camelCase notation to name variables.
Example
class ClassName {
public function doSomething() {
$data_module = new DataModule();
}
}
Source
The variable $mount_buf is not named in camelCase. Open
public static function df($df_param = "", $get_inodes = true)
{
$arrResult = array();
if (CommonFunctions::executeProgram('mount', '', $mount, PSI_DEBUG)) {
$mount = preg_split("/\n/", $mount, -1, PREG_SPLIT_NO_EMPTY);
- Read upRead up
- Exclude checks
CamelCaseVariableName
Since: 0.2
It is considered best practice to use the camelCase notation to name variables.
Example
class ClassName {
public function doSomething() {
$data_module = new DataModule();
}
}
Source
The variable $df_buf1 is not named in camelCase. Open
public static function df($df_param = "", $get_inodes = true)
{
$arrResult = array();
if (CommonFunctions::executeProgram('mount', '', $mount, PSI_DEBUG)) {
$mount = preg_split("/\n/", $mount, -1, PREG_SPLIT_NO_EMPTY);
- Read upRead up
- Exclude checks
CamelCaseVariableName
Since: 0.2
It is considered best practice to use the camelCase notation to name variables.
Example
class ClassName {
public function doSomething() {
$data_module = new DataModule();
}
}
Source
The variable $df_buf2 is not named in camelCase. Open
public static function df($df_param = "", $get_inodes = true)
{
$arrResult = array();
if (CommonFunctions::executeProgram('mount', '', $mount, PSI_DEBUG)) {
$mount = preg_split("/\n/", $mount, -1, PREG_SPLIT_NO_EMPTY);
- Read upRead up
- Exclude checks
CamelCaseVariableName
Since: 0.2
It is considered best practice to use the camelCase notation to name variables.
Example
class ClassName {
public function doSomething() {
$data_module = new DataModule();
}
}
Source
The variable $df_buf2 is not named in camelCase. Open
public static function df($df_param = "", $get_inodes = true)
{
$arrResult = array();
if (CommonFunctions::executeProgram('mount', '', $mount, PSI_DEBUG)) {
$mount = preg_split("/\n/", $mount, -1, PREG_SPLIT_NO_EMPTY);
- Read upRead up
- Exclude checks
CamelCaseVariableName
Since: 0.2
It is considered best practice to use the camelCase notation to name variables.
Example
class ClassName {
public function doSomething() {
$data_module = new DataModule();
}
}
Source
The variable $df_buf is not named in camelCase. Open
public static function df($df_param = "", $get_inodes = true)
{
$arrResult = array();
if (CommonFunctions::executeProgram('mount', '', $mount, PSI_DEBUG)) {
$mount = preg_split("/\n/", $mount, -1, PREG_SPLIT_NO_EMPTY);
- Read upRead up
- Exclude checks
CamelCaseVariableName
Since: 0.2
It is considered best practice to use the camelCase notation to name variables.
Example
class ClassName {
public function doSomething() {
$data_module = new DataModule();
}
}
Source
The variable $mount_param is not named in camelCase. Open
public static function df($df_param = "", $get_inodes = true)
{
$arrResult = array();
if (CommonFunctions::executeProgram('mount', '', $mount, PSI_DEBUG)) {
$mount = preg_split("/\n/", $mount, -1, PREG_SPLIT_NO_EMPTY);
- Read upRead up
- Exclude checks
CamelCaseVariableName
Since: 0.2
It is considered best practice to use the camelCase notation to name variables.
Example
class ClassName {
public function doSomething() {
$data_module = new DataModule();
}
}
Source
The variable $mount_param is not named in camelCase. Open
public static function df($df_param = "", $get_inodes = true)
{
$arrResult = array();
if (CommonFunctions::executeProgram('mount', '', $mount, PSI_DEBUG)) {
$mount = preg_split("/\n/", $mount, -1, PREG_SPLIT_NO_EMPTY);
- Read upRead up
- Exclude checks
CamelCaseVariableName
Since: 0.2
It is considered best practice to use the camelCase notation to name variables.
Example
class ClassName {
public function doSomething() {
$data_module = new DataModule();
}
}
Source
The variable $mount_buf is not named in camelCase. Open
public static function df($df_param = "", $get_inodes = true)
{
$arrResult = array();
if (CommonFunctions::executeProgram('mount', '', $mount, PSI_DEBUG)) {
$mount = preg_split("/\n/", $mount, -1, PREG_SPLIT_NO_EMPTY);
- Read upRead up
- Exclude checks
CamelCaseVariableName
Since: 0.2
It is considered best practice to use the camelCase notation to name variables.
Example
class ClassName {
public function doSomething() {
$data_module = new DataModule();
}
}
Source
The variable $mount_point is not named in camelCase. Open
public static function df($df_param = "", $get_inodes = true)
{
$arrResult = array();
if (CommonFunctions::executeProgram('mount', '', $mount, PSI_DEBUG)) {
$mount = preg_split("/\n/", $mount, -1, PREG_SPLIT_NO_EMPTY);
- Read upRead up
- Exclude checks
CamelCaseVariableName
Since: 0.2
It is considered best practice to use the camelCase notation to name variables.
Example
class ClassName {
public function doSomething() {
$data_module = new DataModule();
}
}
Source
The variable $df2_line is not named in camelCase. Open
public static function df($df_param = "", $get_inodes = true)
{
$arrResult = array();
if (CommonFunctions::executeProgram('mount', '', $mount, PSI_DEBUG)) {
$mount = preg_split("/\n/", $mount, -1, PREG_SPLIT_NO_EMPTY);
- Read upRead up
- Exclude checks
CamelCaseVariableName
Since: 0.2
It is considered best practice to use the camelCase notation to name variables.
Example
class ClassName {
public function doSomething() {
$data_module = new DataModule();
}
}
Source
The variable $df_buf2 is not named in camelCase. Open
public static function df($df_param = "", $get_inodes = true)
{
$arrResult = array();
if (CommonFunctions::executeProgram('mount', '', $mount, PSI_DEBUG)) {
$mount = preg_split("/\n/", $mount, -1, PREG_SPLIT_NO_EMPTY);
- Read upRead up
- Exclude checks
CamelCaseVariableName
Since: 0.2
It is considered best practice to use the camelCase notation to name variables.
Example
class ClassName {
public function doSomething() {
$data_module = new DataModule();
}
}
Source
The variable $df_buf is not named in camelCase. Open
public static function df($df_param = "", $get_inodes = true)
{
$arrResult = array();
if (CommonFunctions::executeProgram('mount', '', $mount, PSI_DEBUG)) {
$mount = preg_split("/\n/", $mount, -1, PREG_SPLIT_NO_EMPTY);
- Read upRead up
- Exclude checks
CamelCaseVariableName
Since: 0.2
It is considered best practice to use the camelCase notation to name variables.
Example
class ClassName {
public function doSomething() {
$data_module = new DataModule();
}
}
Source
The variable $df_buf is not named in camelCase. Open
public static function df($df_param = "", $get_inodes = true)
{
$arrResult = array();
if (CommonFunctions::executeProgram('mount', '', $mount, PSI_DEBUG)) {
$mount = preg_split("/\n/", $mount, -1, PREG_SPLIT_NO_EMPTY);
- Read upRead up
- Exclude checks
CamelCaseVariableName
Since: 0.2
It is considered best practice to use the camelCase notation to name variables.
Example
class ClassName {
public function doSomething() {
$data_module = new DataModule();
}
}
Source
The variable $mount_param is not named in camelCase. Open
public static function df($df_param = "", $get_inodes = true)
{
$arrResult = array();
if (CommonFunctions::executeProgram('mount', '', $mount, PSI_DEBUG)) {
$mount = preg_split("/\n/", $mount, -1, PREG_SPLIT_NO_EMPTY);
- Read upRead up
- Exclude checks
CamelCaseVariableName
Since: 0.2
It is considered best practice to use the camelCase notation to name variables.
Example
class ClassName {
public function doSomething() {
$data_module = new DataModule();
}
}
Source
The variable $mount_parm is not named in camelCase. Open
public static function df($df_param = "", $get_inodes = true)
{
$arrResult = array();
if (CommonFunctions::executeProgram('mount', '', $mount, PSI_DEBUG)) {
$mount = preg_split("/\n/", $mount, -1, PREG_SPLIT_NO_EMPTY);
- Read upRead up
- Exclude checks
CamelCaseVariableName
Since: 0.2
It is considered best practice to use the camelCase notation to name variables.
Example
class ClassName {
public function doSomething() {
$data_module = new DataModule();
}
}
Source
The variable $mount_buf is not named in camelCase. Open
public static function df($df_param = "", $get_inodes = true)
{
$arrResult = array();
if (CommonFunctions::executeProgram('mount', '', $mount, PSI_DEBUG)) {
$mount = preg_split("/\n/", $mount, -1, PREG_SPLIT_NO_EMPTY);
- Read upRead up
- Exclude checks
CamelCaseVariableName
Since: 0.2
It is considered best practice to use the camelCase notation to name variables.
Example
class ClassName {
public function doSomething() {
$data_module = new DataModule();
}
}
Source
The variable $mount_buf is not named in camelCase. Open
public static function df($df_param = "", $get_inodes = true)
{
$arrResult = array();
if (CommonFunctions::executeProgram('mount', '', $mount, PSI_DEBUG)) {
$mount = preg_split("/\n/", $mount, -1, PREG_SPLIT_NO_EMPTY);
- Read upRead up
- Exclude checks
CamelCaseVariableName
Since: 0.2
It is considered best practice to use the camelCase notation to name variables.
Example
class ClassName {
public function doSomething() {
$data_module = new DataModule();
}
}
Source
The variable $df_param is not named in camelCase. Open
public static function df($df_param = "", $get_inodes = true)
{
$arrResult = array();
if (CommonFunctions::executeProgram('mount', '', $mount, PSI_DEBUG)) {
$mount = preg_split("/\n/", $mount, -1, PREG_SPLIT_NO_EMPTY);
- Read upRead up
- Exclude checks
CamelCaseVariableName
Since: 0.2
It is considered best practice to use the camelCase notation to name variables.
Example
class ClassName {
public function doSomething() {
$data_module = new DataModule();
}
}
Source
The variable $df_line is not named in camelCase. Open
public static function df($df_param = "", $get_inodes = true)
{
$arrResult = array();
if (CommonFunctions::executeProgram('mount', '', $mount, PSI_DEBUG)) {
$mount = preg_split("/\n/", $mount, -1, PREG_SPLIT_NO_EMPTY);
- Read upRead up
- Exclude checks
CamelCaseVariableName
Since: 0.2
It is considered best practice to use the camelCase notation to name variables.
Example
class ClassName {
public function doSomething() {
$data_module = new DataModule();
}
}
Source
The variable $df_buf is not named in camelCase. Open
public static function df($df_param = "", $get_inodes = true)
{
$arrResult = array();
if (CommonFunctions::executeProgram('mount', '', $mount, PSI_DEBUG)) {
$mount = preg_split("/\n/", $mount, -1, PREG_SPLIT_NO_EMPTY);
- Read upRead up
- Exclude checks
CamelCaseVariableName
Since: 0.2
It is considered best practice to use the camelCase notation to name variables.
Example
class ClassName {
public function doSomething() {
$data_module = new DataModule();
}
}
Source
The variable $df_buf2 is not named in camelCase. Open
public static function df($df_param = "", $get_inodes = true)
{
$arrResult = array();
if (CommonFunctions::executeProgram('mount', '', $mount, PSI_DEBUG)) {
$mount = preg_split("/\n/", $mount, -1, PREG_SPLIT_NO_EMPTY);
- Read upRead up
- Exclude checks
CamelCaseVariableName
Since: 0.2
It is considered best practice to use the camelCase notation to name variables.
Example
class ClassName {
public function doSomething() {
$data_module = new DataModule();
}
}
Source
The variable $df_buf is not named in camelCase. Open
public static function df($df_param = "", $get_inodes = true)
{
$arrResult = array();
if (CommonFunctions::executeProgram('mount', '', $mount, PSI_DEBUG)) {
$mount = preg_split("/\n/", $mount, -1, PREG_SPLIT_NO_EMPTY);
- Read upRead up
- Exclude checks
CamelCaseVariableName
Since: 0.2
It is considered best practice to use the camelCase notation to name variables.
Example
class ClassName {
public function doSomething() {
$data_module = new DataModule();
}
}
Source
The variable $df_buf is not named in camelCase. Open
public static function df($df_param = "", $get_inodes = true)
{
$arrResult = array();
if (CommonFunctions::executeProgram('mount', '', $mount, PSI_DEBUG)) {
$mount = preg_split("/\n/", $mount, -1, PREG_SPLIT_NO_EMPTY);
- Read upRead up
- Exclude checks
CamelCaseVariableName
Since: 0.2
It is considered best practice to use the camelCase notation to name variables.
Example
class ClassName {
public function doSomething() {
$data_module = new DataModule();
}
}
Source
The variable $df_buf is not named in camelCase. Open
public static function df($df_param = "", $get_inodes = true)
{
$arrResult = array();
if (CommonFunctions::executeProgram('mount', '', $mount, PSI_DEBUG)) {
$mount = preg_split("/\n/", $mount, -1, PREG_SPLIT_NO_EMPTY);
- Read upRead up
- Exclude checks
CamelCaseVariableName
Since: 0.2
It is considered best practice to use the camelCase notation to name variables.
Example
class ClassName {
public function doSomething() {
$data_module = new DataModule();
}
}
Source
The variable $df_buf is not named in camelCase. Open
public static function df($df_param = "", $get_inodes = true)
{
$arrResult = array();
if (CommonFunctions::executeProgram('mount', '', $mount, PSI_DEBUG)) {
$mount = preg_split("/\n/", $mount, -1, PREG_SPLIT_NO_EMPTY);
- Read upRead up
- Exclude checks
CamelCaseVariableName
Since: 0.2
It is considered best practice to use the camelCase notation to name variables.
Example
class ClassName {
public function doSomething() {
$data_module = new DataModule();
}
}
Source
The variable $mount_parm is not named in camelCase. Open
public static function df($df_param = "", $get_inodes = true)
{
$arrResult = array();
if (CommonFunctions::executeProgram('mount', '', $mount, PSI_DEBUG)) {
$mount = preg_split("/\n/", $mount, -1, PREG_SPLIT_NO_EMPTY);
- Read upRead up
- Exclude checks
CamelCaseVariableName
Since: 0.2
It is considered best practice to use the camelCase notation to name variables.
Example
class ClassName {
public function doSomething() {
$data_module = new DataModule();
}
}
Source
The variable $mount_param is not named in camelCase. Open
public static function df($df_param = "", $get_inodes = true)
{
$arrResult = array();
if (CommonFunctions::executeProgram('mount', '', $mount, PSI_DEBUG)) {
$mount = preg_split("/\n/", $mount, -1, PREG_SPLIT_NO_EMPTY);
- Read upRead up
- Exclude checks
CamelCaseVariableName
Since: 0.2
It is considered best practice to use the camelCase notation to name variables.
Example
class ClassName {
public function doSomething() {
$data_module = new DataModule();
}
}
Source
The variable $mount_param is not named in camelCase. Open
public static function df($df_param = "", $get_inodes = true)
{
$arrResult = array();
if (CommonFunctions::executeProgram('mount', '', $mount, PSI_DEBUG)) {
$mount = preg_split("/\n/", $mount, -1, PREG_SPLIT_NO_EMPTY);
- Read upRead up
- Exclude checks
CamelCaseVariableName
Since: 0.2
It is considered best practice to use the camelCase notation to name variables.
Example
class ClassName {
public function doSomething() {
$data_module = new DataModule();
}
}
Source
The variable $mount_parm is not named in camelCase. Open
public static function df($df_param = "", $get_inodes = true)
{
$arrResult = array();
if (CommonFunctions::executeProgram('mount', '', $mount, PSI_DEBUG)) {
$mount = preg_split("/\n/", $mount, -1, PREG_SPLIT_NO_EMPTY);
- Read upRead up
- Exclude checks
CamelCaseVariableName
Since: 0.2
It is considered best practice to use the camelCase notation to name variables.
Example
class ClassName {
public function doSomething() {
$data_module = new DataModule();
}
}
Source
The variable $mount_buf is not named in camelCase. Open
public static function df($df_param = "", $get_inodes = true)
{
$arrResult = array();
if (CommonFunctions::executeProgram('mount', '', $mount, PSI_DEBUG)) {
$mount = preg_split("/\n/", $mount, -1, PREG_SPLIT_NO_EMPTY);
- Read upRead up
- Exclude checks
CamelCaseVariableName
Since: 0.2
It is considered best practice to use the camelCase notation to name variables.
Example
class ClassName {
public function doSomething() {
$data_module = new DataModule();
}
}
Source
The variable $mount_point is not named in camelCase. Open
public static function df($df_param = "", $get_inodes = true)
{
$arrResult = array();
if (CommonFunctions::executeProgram('mount', '', $mount, PSI_DEBUG)) {
$mount = preg_split("/\n/", $mount, -1, PREG_SPLIT_NO_EMPTY);
- Read upRead up
- Exclude checks
CamelCaseVariableName
Since: 0.2
It is considered best practice to use the camelCase notation to name variables.
Example
class ClassName {
public function doSomething() {
$data_module = new DataModule();
}
}
Source
The variable $df_buf1 is not named in camelCase. Open
public static function df($df_param = "", $get_inodes = true)
{
$arrResult = array();
if (CommonFunctions::executeProgram('mount', '', $mount, PSI_DEBUG)) {
$mount = preg_split("/\n/", $mount, -1, PREG_SPLIT_NO_EMPTY);
- Read upRead up
- Exclude checks
CamelCaseVariableName
Since: 0.2
It is considered best practice to use the camelCase notation to name variables.
Example
class ClassName {
public function doSomething() {
$data_module = new DataModule();
}
}
Source
The variable $df_buf is not named in camelCase. Open
public static function df($df_param = "", $get_inodes = true)
{
$arrResult = array();
if (CommonFunctions::executeProgram('mount', '', $mount, PSI_DEBUG)) {
$mount = preg_split("/\n/", $mount, -1, PREG_SPLIT_NO_EMPTY);
- Read upRead up
- Exclude checks
CamelCaseVariableName
Since: 0.2
It is considered best practice to use the camelCase notation to name variables.
Example
class ClassName {
public function doSomething() {
$data_module = new DataModule();
}
}
Source
The variable $df_buf is not named in camelCase. Open
public static function df($df_param = "", $get_inodes = true)
{
$arrResult = array();
if (CommonFunctions::executeProgram('mount', '', $mount, PSI_DEBUG)) {
$mount = preg_split("/\n/", $mount, -1, PREG_SPLIT_NO_EMPTY);
- Read upRead up
- Exclude checks
CamelCaseVariableName
Since: 0.2
It is considered best practice to use the camelCase notation to name variables.
Example
class ClassName {
public function doSomething() {
$data_module = new DataModule();
}
}
Source
The variable $mount_param is not named in camelCase. Open
public static function df($df_param = "", $get_inodes = true)
{
$arrResult = array();
if (CommonFunctions::executeProgram('mount', '', $mount, PSI_DEBUG)) {
$mount = preg_split("/\n/", $mount, -1, PREG_SPLIT_NO_EMPTY);
- Read upRead up
- Exclude checks
CamelCaseVariableName
Since: 0.2
It is considered best practice to use the camelCase notation to name variables.
Example
class ClassName {
public function doSomething() {
$data_module = new DataModule();
}
}
Source
The variable $mount_param is not named in camelCase. Open
public static function df($df_param = "", $get_inodes = true)
{
$arrResult = array();
if (CommonFunctions::executeProgram('mount', '', $mount, PSI_DEBUG)) {
$mount = preg_split("/\n/", $mount, -1, PREG_SPLIT_NO_EMPTY);
- Read upRead up
- Exclude checks
CamelCaseVariableName
Since: 0.2
It is considered best practice to use the camelCase notation to name variables.
Example
class ClassName {
public function doSomething() {
$data_module = new DataModule();
}
}
Source
The variable $df_inodes is not named in camelCase. Open
public static function df($df_param = "", $get_inodes = true)
{
$arrResult = array();
if (CommonFunctions::executeProgram('mount', '', $mount, PSI_DEBUG)) {
$mount = preg_split("/\n/", $mount, -1, PREG_SPLIT_NO_EMPTY);
- Read upRead up
- Exclude checks
CamelCaseVariableName
Since: 0.2
It is considered best practice to use the camelCase notation to name variables.
Example
class ClassName {
public function doSomething() {
$data_module = new DataModule();
}
}
Source
The variable $mount_buf is not named in camelCase. Open
public static function df($df_param = "", $get_inodes = true)
{
$arrResult = array();
if (CommonFunctions::executeProgram('mount', '', $mount, PSI_DEBUG)) {
$mount = preg_split("/\n/", $mount, -1, PREG_SPLIT_NO_EMPTY);
- Read upRead up
- Exclude checks
CamelCaseVariableName
Since: 0.2
It is considered best practice to use the camelCase notation to name variables.
Example
class ClassName {
public function doSomething() {
$data_module = new DataModule();
}
}
Source
The variable $mount_buf is not named in camelCase. Open
public static function df($df_param = "", $get_inodes = true)
{
$arrResult = array();
if (CommonFunctions::executeProgram('mount', '', $mount, PSI_DEBUG)) {
$mount = preg_split("/\n/", $mount, -1, PREG_SPLIT_NO_EMPTY);
- Read upRead up
- Exclude checks
CamelCaseVariableName
Since: 0.2
It is considered best practice to use the camelCase notation to name variables.
Example
class ClassName {
public function doSomething() {
$data_module = new DataModule();
}
}
Source
The variable $mount_parm is not named in camelCase. Open
public static function df($df_param = "", $get_inodes = true)
{
$arrResult = array();
if (CommonFunctions::executeProgram('mount', '', $mount, PSI_DEBUG)) {
$mount = preg_split("/\n/", $mount, -1, PREG_SPLIT_NO_EMPTY);
- Read upRead up
- Exclude checks
CamelCaseVariableName
Since: 0.2
It is considered best practice to use the camelCase notation to name variables.
Example
class ClassName {
public function doSomething() {
$data_module = new DataModule();
}
}
Source
The variable $df_buf2 is not named in camelCase. Open
public static function df($df_param = "", $get_inodes = true)
{
$arrResult = array();
if (CommonFunctions::executeProgram('mount', '', $mount, PSI_DEBUG)) {
$mount = preg_split("/\n/", $mount, -1, PREG_SPLIT_NO_EMPTY);
- Read upRead up
- Exclude checks
CamelCaseVariableName
Since: 0.2
It is considered best practice to use the camelCase notation to name variables.
Example
class ClassName {
public function doSomething() {
$data_module = new DataModule();
}
}
Source
The variable $mount_param is not named in camelCase. Open
public static function df($df_param = "", $get_inodes = true)
{
$arrResult = array();
if (CommonFunctions::executeProgram('mount', '', $mount, PSI_DEBUG)) {
$mount = preg_split("/\n/", $mount, -1, PREG_SPLIT_NO_EMPTY);
- Read upRead up
- Exclude checks
CamelCaseVariableName
Since: 0.2
It is considered best practice to use the camelCase notation to name variables.
Example
class ClassName {
public function doSomething() {
$data_module = new DataModule();
}
}
Source
The variable $mount_buf is not named in camelCase. Open
public static function df($df_param = "", $get_inodes = true)
{
$arrResult = array();
if (CommonFunctions::executeProgram('mount', '', $mount, PSI_DEBUG)) {
$mount = preg_split("/\n/", $mount, -1, PREG_SPLIT_NO_EMPTY);
- Read upRead up
- Exclude checks
CamelCaseVariableName
Since: 0.2
It is considered best practice to use the camelCase notation to name variables.
Example
class ClassName {
public function doSomething() {
$data_module = new DataModule();
}
}
Source
The variable $mount_param is not named in camelCase. Open
public static function df($df_param = "", $get_inodes = true)
{
$arrResult = array();
if (CommonFunctions::executeProgram('mount', '', $mount, PSI_DEBUG)) {
$mount = preg_split("/\n/", $mount, -1, PREG_SPLIT_NO_EMPTY);
- Read upRead up
- Exclude checks
CamelCaseVariableName
Since: 0.2
It is considered best practice to use the camelCase notation to name variables.
Example
class ClassName {
public function doSomething() {
$data_module = new DataModule();
}
}
Source
The variable $df_inodes is not named in camelCase. Open
public static function df($df_param = "", $get_inodes = true)
{
$arrResult = array();
if (CommonFunctions::executeProgram('mount', '', $mount, PSI_DEBUG)) {
$mount = preg_split("/\n/", $mount, -1, PREG_SPLIT_NO_EMPTY);
- Read upRead up
- Exclude checks
CamelCaseVariableName
Since: 0.2
It is considered best practice to use the camelCase notation to name variables.
Example
class ClassName {
public function doSomething() {
$data_module = new DataModule();
}
}
Source
The variable $mount_buf is not named in camelCase. Open
public static function df($df_param = "", $get_inodes = true)
{
$arrResult = array();
if (CommonFunctions::executeProgram('mount', '', $mount, PSI_DEBUG)) {
$mount = preg_split("/\n/", $mount, -1, PREG_SPLIT_NO_EMPTY);
- Read upRead up
- Exclude checks
CamelCaseVariableName
Since: 0.2
It is considered best practice to use the camelCase notation to name variables.
Example
class ClassName {
public function doSomething() {
$data_module = new DataModule();
}
}
Source
The variable $mount_buf is not named in camelCase. Open
public static function df($df_param = "", $get_inodes = true)
{
$arrResult = array();
if (CommonFunctions::executeProgram('mount', '', $mount, PSI_DEBUG)) {
$mount = preg_split("/\n/", $mount, -1, PREG_SPLIT_NO_EMPTY);
- Read upRead up
- Exclude checks
CamelCaseVariableName
Since: 0.2
It is considered best practice to use the camelCase notation to name variables.
Example
class ClassName {
public function doSomething() {
$data_module = new DataModule();
}
}
Source
The variable $mount_buf is not named in camelCase. Open
public static function df($df_param = "", $get_inodes = true)
{
$arrResult = array();
if (CommonFunctions::executeProgram('mount', '', $mount, PSI_DEBUG)) {
$mount = preg_split("/\n/", $mount, -1, PREG_SPLIT_NO_EMPTY);
- Read upRead up
- Exclude checks
CamelCaseVariableName
Since: 0.2
It is considered best practice to use the camelCase notation to name variables.
Example
class ClassName {
public function doSomething() {
$data_module = new DataModule();
}
}
Source
The variable $df_buf1 is not named in camelCase. Open
public static function df($df_param = "", $get_inodes = true)
{
$arrResult = array();
if (CommonFunctions::executeProgram('mount', '', $mount, PSI_DEBUG)) {
$mount = preg_split("/\n/", $mount, -1, PREG_SPLIT_NO_EMPTY);
- Read upRead up
- Exclude checks
CamelCaseVariableName
Since: 0.2
It is considered best practice to use the camelCase notation to name variables.
Example
class ClassName {
public function doSomething() {
$data_module = new DataModule();
}
}
Source
The variable $df_buf is not named in camelCase. Open
public static function df($df_param = "", $get_inodes = true)
{
$arrResult = array();
if (CommonFunctions::executeProgram('mount', '', $mount, PSI_DEBUG)) {
$mount = preg_split("/\n/", $mount, -1, PREG_SPLIT_NO_EMPTY);
- Read upRead up
- Exclude checks
CamelCaseVariableName
Since: 0.2
It is considered best practice to use the camelCase notation to name variables.
Example
class ClassName {
public function doSomething() {
$data_module = new DataModule();
}
}
Source
The variable $mount_param is not named in camelCase. Open
public static function df($df_param = "", $get_inodes = true)
{
$arrResult = array();
if (CommonFunctions::executeProgram('mount', '', $mount, PSI_DEBUG)) {
$mount = preg_split("/\n/", $mount, -1, PREG_SPLIT_NO_EMPTY);
- Read upRead up
- Exclude checks
CamelCaseVariableName
Since: 0.2
It is considered best practice to use the camelCase notation to name variables.
Example
class ClassName {
public function doSomething() {
$data_module = new DataModule();
}
}
Source
The variable $mount_param is not named in camelCase. Open
public static function df($df_param = "", $get_inodes = true)
{
$arrResult = array();
if (CommonFunctions::executeProgram('mount', '', $mount, PSI_DEBUG)) {
$mount = preg_split("/\n/", $mount, -1, PREG_SPLIT_NO_EMPTY);
- Read upRead up
- Exclude checks
CamelCaseVariableName
Since: 0.2
It is considered best practice to use the camelCase notation to name variables.
Example
class ClassName {
public function doSomething() {
$data_module = new DataModule();
}
}
Source
The variable $mount_buf is not named in camelCase. Open
public static function df($df_param = "", $get_inodes = true)
{
$arrResult = array();
if (CommonFunctions::executeProgram('mount', '', $mount, PSI_DEBUG)) {
$mount = preg_split("/\n/", $mount, -1, PREG_SPLIT_NO_EMPTY);
- Read upRead up
- Exclude checks
CamelCaseVariableName
Since: 0.2
It is considered best practice to use the camelCase notation to name variables.
Example
class ClassName {
public function doSomething() {
$data_module = new DataModule();
}
}
Source
The variable $mount_buf is not named in camelCase. Open
public static function df($df_param = "", $get_inodes = true)
{
$arrResult = array();
if (CommonFunctions::executeProgram('mount', '', $mount, PSI_DEBUG)) {
$mount = preg_split("/\n/", $mount, -1, PREG_SPLIT_NO_EMPTY);
- Read upRead up
- Exclude checks
CamelCaseVariableName
Since: 0.2
It is considered best practice to use the camelCase notation to name variables.
Example
class ClassName {
public function doSomething() {
$data_module = new DataModule();
}
}
Source
The variable $mount_buf is not named in camelCase. Open
public static function df($df_param = "", $get_inodes = true)
{
$arrResult = array();
if (CommonFunctions::executeProgram('mount', '', $mount, PSI_DEBUG)) {
$mount = preg_split("/\n/", $mount, -1, PREG_SPLIT_NO_EMPTY);
- Read upRead up
- Exclude checks
CamelCaseVariableName
Since: 0.2
It is considered best practice to use the camelCase notation to name variables.
Example
class ClassName {
public function doSomething() {
$data_module = new DataModule();
}
}
Source
The variable $mount_line is not named in camelCase. Open
public static function df($df_param = "", $get_inodes = true)
{
$arrResult = array();
if (CommonFunctions::executeProgram('mount', '', $mount, PSI_DEBUG)) {
$mount = preg_split("/\n/", $mount, -1, PREG_SPLIT_NO_EMPTY);
- Read upRead up
- Exclude checks
CamelCaseVariableName
Since: 0.2
It is considered best practice to use the camelCase notation to name variables.
Example
class ClassName {
public function doSomething() {
$data_module = new DataModule();
}
}
Source
The variable $df_line is not named in camelCase. Open
public static function df($df_param = "", $get_inodes = true)
{
$arrResult = array();
if (CommonFunctions::executeProgram('mount', '', $mount, PSI_DEBUG)) {
$mount = preg_split("/\n/", $mount, -1, PREG_SPLIT_NO_EMPTY);
- Read upRead up
- Exclude checks
CamelCaseVariableName
Since: 0.2
It is considered best practice to use the camelCase notation to name variables.
Example
class ClassName {
public function doSomething() {
$data_module = new DataModule();
}
}
Source
The variable $df_buf1 is not named in camelCase. Open
public static function df($df_param = "", $get_inodes = true)
{
$arrResult = array();
if (CommonFunctions::executeProgram('mount', '', $mount, PSI_DEBUG)) {
$mount = preg_split("/\n/", $mount, -1, PREG_SPLIT_NO_EMPTY);
- Read upRead up
- Exclude checks
CamelCaseVariableName
Since: 0.2
It is considered best practice to use the camelCase notation to name variables.
Example
class ClassName {
public function doSomething() {
$data_module = new DataModule();
}
}
Source
The variable $df_buf2 is not named in camelCase. Open
public static function df($df_param = "", $get_inodes = true)
{
$arrResult = array();
if (CommonFunctions::executeProgram('mount', '', $mount, PSI_DEBUG)) {
$mount = preg_split("/\n/", $mount, -1, PREG_SPLIT_NO_EMPTY);
- Read upRead up
- Exclude checks
CamelCaseVariableName
Since: 0.2
It is considered best practice to use the camelCase notation to name variables.
Example
class ClassName {
public function doSomething() {
$data_module = new DataModule();
}
}
Source
The variable $df_buf2 is not named in camelCase. Open
public static function df($df_param = "", $get_inodes = true)
{
$arrResult = array();
if (CommonFunctions::executeProgram('mount', '', $mount, PSI_DEBUG)) {
$mount = preg_split("/\n/", $mount, -1, PREG_SPLIT_NO_EMPTY);
- Read upRead up
- Exclude checks
CamelCaseVariableName
Since: 0.2
It is considered best practice to use the camelCase notation to name variables.
Example
class ClassName {
public function doSomething() {
$data_module = new DataModule();
}
}
Source
The variable $mount_parm is not named in camelCase. Open
public static function df($df_param = "", $get_inodes = true)
{
$arrResult = array();
if (CommonFunctions::executeProgram('mount', '', $mount, PSI_DEBUG)) {
$mount = preg_split("/\n/", $mount, -1, PREG_SPLIT_NO_EMPTY);
- Read upRead up
- Exclude checks
CamelCaseVariableName
Since: 0.2
It is considered best practice to use the camelCase notation to name variables.
Example
class ClassName {
public function doSomething() {
$data_module = new DataModule();
}
}
Source
The variable $mount_param is not named in camelCase. Open
public static function df($df_param = "", $get_inodes = true)
{
$arrResult = array();
if (CommonFunctions::executeProgram('mount', '', $mount, PSI_DEBUG)) {
$mount = preg_split("/\n/", $mount, -1, PREG_SPLIT_NO_EMPTY);
- Read upRead up
- Exclude checks
CamelCaseVariableName
Since: 0.2
It is considered best practice to use the camelCase notation to name variables.
Example
class ClassName {
public function doSomething() {
$data_module = new DataModule();
}
}
Source
The variable $mount_param is not named in camelCase. Open
public static function df($df_param = "", $get_inodes = true)
{
$arrResult = array();
if (CommonFunctions::executeProgram('mount', '', $mount, PSI_DEBUG)) {
$mount = preg_split("/\n/", $mount, -1, PREG_SPLIT_NO_EMPTY);
- Read upRead up
- Exclude checks
CamelCaseVariableName
Since: 0.2
It is considered best practice to use the camelCase notation to name variables.
Example
class ClassName {
public function doSomething() {
$data_module = new DataModule();
}
}
Source
The variable $mount_param is not named in camelCase. Open
public static function df($df_param = "", $get_inodes = true)
{
$arrResult = array();
if (CommonFunctions::executeProgram('mount', '', $mount, PSI_DEBUG)) {
$mount = preg_split("/\n/", $mount, -1, PREG_SPLIT_NO_EMPTY);
- Read upRead up
- Exclude checks
CamelCaseVariableName
Since: 0.2
It is considered best practice to use the camelCase notation to name variables.
Example
class ClassName {
public function doSomething() {
$data_module = new DataModule();
}
}
Source
The variable $mount_param is not named in camelCase. Open
public static function df($df_param = "", $get_inodes = true)
{
$arrResult = array();
if (CommonFunctions::executeProgram('mount', '', $mount, PSI_DEBUG)) {
$mount = preg_split("/\n/", $mount, -1, PREG_SPLIT_NO_EMPTY);
- Read upRead up
- Exclude checks
CamelCaseVariableName
Since: 0.2
It is considered best practice to use the camelCase notation to name variables.
Example
class ClassName {
public function doSomething() {
$data_module = new DataModule();
}
}
Source
The variable $mount_param is not named in camelCase. Open
public static function df($df_param = "", $get_inodes = true)
{
$arrResult = array();
if (CommonFunctions::executeProgram('mount', '', $mount, PSI_DEBUG)) {
$mount = preg_split("/\n/", $mount, -1, PREG_SPLIT_NO_EMPTY);
- Read upRead up
- Exclude checks
CamelCaseVariableName
Since: 0.2
It is considered best practice to use the camelCase notation to name variables.
Example
class ClassName {
public function doSomething() {
$data_module = new DataModule();
}
}
Source
The variable $mount_buf is not named in camelCase. Open
public static function df($df_param = "", $get_inodes = true)
{
$arrResult = array();
if (CommonFunctions::executeProgram('mount', '', $mount, PSI_DEBUG)) {
$mount = preg_split("/\n/", $mount, -1, PREG_SPLIT_NO_EMPTY);
- Read upRead up
- Exclude checks
CamelCaseVariableName
Since: 0.2
It is considered best practice to use the camelCase notation to name variables.
Example
class ClassName {
public function doSomething() {
$data_module = new DataModule();
}
}
Source
The variable $mount_line is not named in camelCase. Open
public static function df($df_param = "", $get_inodes = true)
{
$arrResult = array();
if (CommonFunctions::executeProgram('mount', '', $mount, PSI_DEBUG)) {
$mount = preg_split("/\n/", $mount, -1, PREG_SPLIT_NO_EMPTY);
- Read upRead up
- Exclude checks
CamelCaseVariableName
Since: 0.2
It is considered best practice to use the camelCase notation to name variables.
Example
class ClassName {
public function doSomething() {
$data_module = new DataModule();
}
}
Source
The variable $mount_parm is not named in camelCase. Open
public static function df($df_param = "", $get_inodes = true)
{
$arrResult = array();
if (CommonFunctions::executeProgram('mount', '', $mount, PSI_DEBUG)) {
$mount = preg_split("/\n/", $mount, -1, PREG_SPLIT_NO_EMPTY);
- Read upRead up
- Exclude checks
CamelCaseVariableName
Since: 0.2
It is considered best practice to use the camelCase notation to name variables.
Example
class ClassName {
public function doSomething() {
$data_module = new DataModule();
}
}
Source
The variable $df_inodes is not named in camelCase. Open
public static function df($df_param = "", $get_inodes = true)
{
$arrResult = array();
if (CommonFunctions::executeProgram('mount', '', $mount, PSI_DEBUG)) {
$mount = preg_split("/\n/", $mount, -1, PREG_SPLIT_NO_EMPTY);
- Read upRead up
- Exclude checks
CamelCaseVariableName
Since: 0.2
It is considered best practice to use the camelCase notation to name variables.
Example
class ClassName {
public function doSomething() {
$data_module = new DataModule();
}
}
Source
The variable $inode_buf is not named in camelCase. Open
public static function df($df_param = "", $get_inodes = true)
{
$arrResult = array();
if (CommonFunctions::executeProgram('mount', '', $mount, PSI_DEBUG)) {
$mount = preg_split("/\n/", $mount, -1, PREG_SPLIT_NO_EMPTY);
- Read upRead up
- Exclude checks
CamelCaseVariableName
Since: 0.2
It is considered best practice to use the camelCase notation to name variables.
Example
class ClassName {
public function doSomething() {
$data_module = new DataModule();
}
}
Source
The variable $df_buf2 is not named in camelCase. Open
public static function df($df_param = "", $get_inodes = true)
{
$arrResult = array();
if (CommonFunctions::executeProgram('mount', '', $mount, PSI_DEBUG)) {
$mount = preg_split("/\n/", $mount, -1, PREG_SPLIT_NO_EMPTY);
- Read upRead up
- Exclude checks
CamelCaseVariableName
Since: 0.2
It is considered best practice to use the camelCase notation to name variables.
Example
class ClassName {
public function doSomething() {
$data_module = new DataModule();
}
}
Source
The variable $df_buf2 is not named in camelCase. Open
public static function df($df_param = "", $get_inodes = true)
{
$arrResult = array();
if (CommonFunctions::executeProgram('mount', '', $mount, PSI_DEBUG)) {
$mount = preg_split("/\n/", $mount, -1, PREG_SPLIT_NO_EMPTY);
- Read upRead up
- Exclude checks
CamelCaseVariableName
Since: 0.2
It is considered best practice to use the camelCase notation to name variables.
Example
class ClassName {
public function doSomething() {
$data_module = new DataModule();
}
}
Source
The variable $df_buf is not named in camelCase. Open
public static function df($df_param = "", $get_inodes = true)
{
$arrResult = array();
if (CommonFunctions::executeProgram('mount', '', $mount, PSI_DEBUG)) {
$mount = preg_split("/\n/", $mount, -1, PREG_SPLIT_NO_EMPTY);
- Read upRead up
- Exclude checks
CamelCaseVariableName
Since: 0.2
It is considered best practice to use the camelCase notation to name variables.
Example
class ClassName {
public function doSomething() {
$data_module = new DataModule();
}
}
Source
The variable $df_buf is not named in camelCase. Open
public static function df($df_param = "", $get_inodes = true)
{
$arrResult = array();
if (CommonFunctions::executeProgram('mount', '', $mount, PSI_DEBUG)) {
$mount = preg_split("/\n/", $mount, -1, PREG_SPLIT_NO_EMPTY);
- Read upRead up
- Exclude checks
CamelCaseVariableName
Since: 0.2
It is considered best practice to use the camelCase notation to name variables.
Example
class ClassName {
public function doSomething() {
$data_module = new DataModule();
}
}
Source
The variable $df_buf is not named in camelCase. Open
public static function df($df_param = "", $get_inodes = true)
{
$arrResult = array();
if (CommonFunctions::executeProgram('mount', '', $mount, PSI_DEBUG)) {
$mount = preg_split("/\n/", $mount, -1, PREG_SPLIT_NO_EMPTY);
- Read upRead up
- Exclude checks
CamelCaseVariableName
Since: 0.2
It is considered best practice to use the camelCase notation to name variables.
Example
class ClassName {
public function doSomething() {
$data_module = new DataModule();
}
}
Source
The variable $mount_buf is not named in camelCase. Open
public static function df($df_param = "", $get_inodes = true)
{
$arrResult = array();
if (CommonFunctions::executeProgram('mount', '', $mount, PSI_DEBUG)) {
$mount = preg_split("/\n/", $mount, -1, PREG_SPLIT_NO_EMPTY);
- Read upRead up
- Exclude checks
CamelCaseVariableName
Since: 0.2
It is considered best practice to use the camelCase notation to name variables.
Example
class ClassName {
public function doSomething() {
$data_module = new DataModule();
}
}
Source
The variable $df_buf2 is not named in camelCase. Open
public static function df($df_param = "", $get_inodes = true)
{
$arrResult = array();
if (CommonFunctions::executeProgram('mount', '', $mount, PSI_DEBUG)) {
$mount = preg_split("/\n/", $mount, -1, PREG_SPLIT_NO_EMPTY);
- Read upRead up
- Exclude checks
CamelCaseVariableName
Since: 0.2
It is considered best practice to use the camelCase notation to name variables.
Example
class ClassName {
public function doSomething() {
$data_module = new DataModule();
}
}
Source
The variable $df_buf is not named in camelCase. Open
public static function df($df_param = "", $get_inodes = true)
{
$arrResult = array();
if (CommonFunctions::executeProgram('mount', '', $mount, PSI_DEBUG)) {
$mount = preg_split("/\n/", $mount, -1, PREG_SPLIT_NO_EMPTY);
- Read upRead up
- Exclude checks
CamelCaseVariableName
Since: 0.2
It is considered best practice to use the camelCase notation to name variables.
Example
class ClassName {
public function doSomething() {
$data_module = new DataModule();
}
}
Source
The variable $mount_parm is not named in camelCase. Open
public static function df($df_param = "", $get_inodes = true)
{
$arrResult = array();
if (CommonFunctions::executeProgram('mount', '', $mount, PSI_DEBUG)) {
$mount = preg_split("/\n/", $mount, -1, PREG_SPLIT_NO_EMPTY);
- Read upRead up
- Exclude checks
CamelCaseVariableName
Since: 0.2
It is considered best practice to use the camelCase notation to name variables.
Example
class ClassName {
public function doSomething() {
$data_module = new DataModule();
}
}
Source
The variable $df_param is not named in camelCase. Open
public static function df($df_param = "", $get_inodes = true)
{
$arrResult = array();
if (CommonFunctions::executeProgram('mount', '', $mount, PSI_DEBUG)) {
$mount = preg_split("/\n/", $mount, -1, PREG_SPLIT_NO_EMPTY);
- Read upRead up
- Exclude checks
CamelCaseVariableName
Since: 0.2
It is considered best practice to use the camelCase notation to name variables.
Example
class ClassName {
public function doSomething() {
$data_module = new DataModule();
}
}
Source
The variable $get_inodes is not named in camelCase. Open
public static function df($df_param = "", $get_inodes = true)
{
$arrResult = array();
if (CommonFunctions::executeProgram('mount', '', $mount, PSI_DEBUG)) {
$mount = preg_split("/\n/", $mount, -1, PREG_SPLIT_NO_EMPTY);
- Read upRead up
- Exclude checks
CamelCaseVariableName
Since: 0.2
It is considered best practice to use the camelCase notation to name variables.
Example
class ClassName {
public function doSomething() {
$data_module = new DataModule();
}
}
Source
The variable $mount_buf is not named in camelCase. Open
public static function df($df_param = "", $get_inodes = true)
{
$arrResult = array();
if (CommonFunctions::executeProgram('mount', '', $mount, PSI_DEBUG)) {
$mount = preg_split("/\n/", $mount, -1, PREG_SPLIT_NO_EMPTY);
- Read upRead up
- Exclude checks
CamelCaseVariableName
Since: 0.2
It is considered best practice to use the camelCase notation to name variables.
Example
class ClassName {
public function doSomething() {
$data_module = new DataModule();
}
}
Source
The variable $inode_buf is not named in camelCase. Open
public static function df($df_param = "", $get_inodes = true)
{
$arrResult = array();
if (CommonFunctions::executeProgram('mount', '', $mount, PSI_DEBUG)) {
$mount = preg_split("/\n/", $mount, -1, PREG_SPLIT_NO_EMPTY);
- Read upRead up
- Exclude checks
CamelCaseVariableName
Since: 0.2
It is considered best practice to use the camelCase notation to name variables.
Example
class ClassName {
public function doSomething() {
$data_module = new DataModule();
}
}
Source
The variable $df_buf is not named in camelCase. Open
public static function df($df_param = "", $get_inodes = true)
{
$arrResult = array();
if (CommonFunctions::executeProgram('mount', '', $mount, PSI_DEBUG)) {
$mount = preg_split("/\n/", $mount, -1, PREG_SPLIT_NO_EMPTY);
- Read upRead up
- Exclude checks
CamelCaseVariableName
Since: 0.2
It is considered best practice to use the camelCase notation to name variables.
Example
class ClassName {
public function doSomething() {
$data_module = new DataModule();
}
}
Source
The variable $df_buf is not named in camelCase. Open
public static function df($df_param = "", $get_inodes = true)
{
$arrResult = array();
if (CommonFunctions::executeProgram('mount', '', $mount, PSI_DEBUG)) {
$mount = preg_split("/\n/", $mount, -1, PREG_SPLIT_NO_EMPTY);
- Read upRead up
- Exclude checks
CamelCaseVariableName
Since: 0.2
It is considered best practice to use the camelCase notation to name variables.
Example
class ClassName {
public function doSomething() {
$data_module = new DataModule();
}
}
Source
The variable $mount_line is not named in camelCase. Open
public static function df($df_param = "", $get_inodes = true)
{
$arrResult = array();
if (CommonFunctions::executeProgram('mount', '', $mount, PSI_DEBUG)) {
$mount = preg_split("/\n/", $mount, -1, PREG_SPLIT_NO_EMPTY);
- Read upRead up
- Exclude checks
CamelCaseVariableName
Since: 0.2
It is considered best practice to use the camelCase notation to name variables.
Example
class ClassName {
public function doSomething() {
$data_module = new DataModule();
}
}
Source
The variable $df_buf is not named in camelCase. Open
public static function df($df_param = "", $get_inodes = true)
{
$arrResult = array();
if (CommonFunctions::executeProgram('mount', '', $mount, PSI_DEBUG)) {
$mount = preg_split("/\n/", $mount, -1, PREG_SPLIT_NO_EMPTY);
- Read upRead up
- Exclude checks
CamelCaseVariableName
Since: 0.2
It is considered best practice to use the camelCase notation to name variables.
Example
class ClassName {
public function doSomething() {
$data_module = new DataModule();
}
}
Source
The variable $mount_param is not named in camelCase. Open
public static function df($df_param = "", $get_inodes = true)
{
$arrResult = array();
if (CommonFunctions::executeProgram('mount', '', $mount, PSI_DEBUG)) {
$mount = preg_split("/\n/", $mount, -1, PREG_SPLIT_NO_EMPTY);
- Read upRead up
- Exclude checks
CamelCaseVariableName
Since: 0.2
It is considered best practice to use the camelCase notation to name variables.
Example
class ClassName {
public function doSomething() {
$data_module = new DataModule();
}
}
Source
The variable $mount_param is not named in camelCase. Open
public static function df($df_param = "", $get_inodes = true)
{
$arrResult = array();
if (CommonFunctions::executeProgram('mount', '', $mount, PSI_DEBUG)) {
$mount = preg_split("/\n/", $mount, -1, PREG_SPLIT_NO_EMPTY);
- Read upRead up
- Exclude checks
CamelCaseVariableName
Since: 0.2
It is considered best practice to use the camelCase notation to name variables.
Example
class ClassName {
public function doSomething() {
$data_module = new DataModule();
}
}
Source
The variable $mount_param is not named in camelCase. Open
public static function df($df_param = "", $get_inodes = true)
{
$arrResult = array();
if (CommonFunctions::executeProgram('mount', '', $mount, PSI_DEBUG)) {
$mount = preg_split("/\n/", $mount, -1, PREG_SPLIT_NO_EMPTY);
- Read upRead up
- Exclude checks
CamelCaseVariableName
Since: 0.2
It is considered best practice to use the camelCase notation to name variables.
Example
class ClassName {
public function doSomething() {
$data_module = new DataModule();
}
}
Source
The variable $mount_buf is not named in camelCase. Open
public static function df($df_param = "", $get_inodes = true)
{
$arrResult = array();
if (CommonFunctions::executeProgram('mount', '', $mount, PSI_DEBUG)) {
$mount = preg_split("/\n/", $mount, -1, PREG_SPLIT_NO_EMPTY);
- Read upRead up
- Exclude checks
CamelCaseVariableName
Since: 0.2
It is considered best practice to use the camelCase notation to name variables.
Example
class ClassName {
public function doSomething() {
$data_module = new DataModule();
}
}
Source
The variable $mount_buf is not named in camelCase. Open
public static function df($df_param = "", $get_inodes = true)
{
$arrResult = array();
if (CommonFunctions::executeProgram('mount', '', $mount, PSI_DEBUG)) {
$mount = preg_split("/\n/", $mount, -1, PREG_SPLIT_NO_EMPTY);
- Read upRead up
- Exclude checks
CamelCaseVariableName
Since: 0.2
It is considered best practice to use the camelCase notation to name variables.
Example
class ClassName {
public function doSomething() {
$data_module = new DataModule();
}
}
Source
The variable $mount_parm is not named in camelCase. Open
public static function df($df_param = "", $get_inodes = true)
{
$arrResult = array();
if (CommonFunctions::executeProgram('mount', '', $mount, PSI_DEBUG)) {
$mount = preg_split("/\n/", $mount, -1, PREG_SPLIT_NO_EMPTY);
- Read upRead up
- Exclude checks
CamelCaseVariableName
Since: 0.2
It is considered best practice to use the camelCase notation to name variables.
Example
class ClassName {
public function doSomething() {
$data_module = new DataModule();
}
}
Source
The variable $df_buf is not named in camelCase. Open
public static function df($df_param = "", $get_inodes = true)
{
$arrResult = array();
if (CommonFunctions::executeProgram('mount', '', $mount, PSI_DEBUG)) {
$mount = preg_split("/\n/", $mount, -1, PREG_SPLIT_NO_EMPTY);
- Read upRead up
- Exclude checks
CamelCaseVariableName
Since: 0.2
It is considered best practice to use the camelCase notation to name variables.
Example
class ClassName {
public function doSomething() {
$data_module = new DataModule();
}
}
Source
The variable $mount_param is not named in camelCase. Open
public static function df($df_param = "", $get_inodes = true)
{
$arrResult = array();
if (CommonFunctions::executeProgram('mount', '', $mount, PSI_DEBUG)) {
$mount = preg_split("/\n/", $mount, -1, PREG_SPLIT_NO_EMPTY);
- Read upRead up
- Exclude checks
CamelCaseVariableName
Since: 0.2
It is considered best practice to use the camelCase notation to name variables.
Example
class ClassName {
public function doSomething() {
$data_module = new DataModule();
}
}
Source
The variable $mount_param is not named in camelCase. Open
public static function df($df_param = "", $get_inodes = true)
{
$arrResult = array();
if (CommonFunctions::executeProgram('mount', '', $mount, PSI_DEBUG)) {
$mount = preg_split("/\n/", $mount, -1, PREG_SPLIT_NO_EMPTY);
- Read upRead up
- Exclude checks
CamelCaseVariableName
Since: 0.2
It is considered best practice to use the camelCase notation to name variables.
Example
class ClassName {
public function doSomething() {
$data_module = new DataModule();
}
}
Source
The variable $mount_line is not named in camelCase. Open
public static function df($df_param = "", $get_inodes = true)
{
$arrResult = array();
if (CommonFunctions::executeProgram('mount', '', $mount, PSI_DEBUG)) {
$mount = preg_split("/\n/", $mount, -1, PREG_SPLIT_NO_EMPTY);
- Read upRead up
- Exclude checks
CamelCaseVariableName
Since: 0.2
It is considered best practice to use the camelCase notation to name variables.
Example
class ClassName {
public function doSomething() {
$data_module = new DataModule();
}
}
Source
The variable $mount_line is not named in camelCase. Open
public static function df($df_param = "", $get_inodes = true)
{
$arrResult = array();
if (CommonFunctions::executeProgram('mount', '', $mount, PSI_DEBUG)) {
$mount = preg_split("/\n/", $mount, -1, PREG_SPLIT_NO_EMPTY);
- Read upRead up
- Exclude checks
CamelCaseVariableName
Since: 0.2
It is considered best practice to use the camelCase notation to name variables.
Example
class ClassName {
public function doSomething() {
$data_module = new DataModule();
}
}
Source
The variable $mount_buf is not named in camelCase. Open
public static function df($df_param = "", $get_inodes = true)
{
$arrResult = array();
if (CommonFunctions::executeProgram('mount', '', $mount, PSI_DEBUG)) {
$mount = preg_split("/\n/", $mount, -1, PREG_SPLIT_NO_EMPTY);
- Read upRead up
- Exclude checks
CamelCaseVariableName
Since: 0.2
It is considered best practice to use the camelCase notation to name variables.
Example
class ClassName {
public function doSomething() {
$data_module = new DataModule();
}
}
Source
The variable $mount_parm is not named in camelCase. Open
public static function df($df_param = "", $get_inodes = true)
{
$arrResult = array();
if (CommonFunctions::executeProgram('mount', '', $mount, PSI_DEBUG)) {
$mount = preg_split("/\n/", $mount, -1, PREG_SPLIT_NO_EMPTY);
- Read upRead up
- Exclude checks
CamelCaseVariableName
Since: 0.2
It is considered best practice to use the camelCase notation to name variables.
Example
class ClassName {
public function doSomething() {
$data_module = new DataModule();
}
}
Source
The variable $mount_buf is not named in camelCase. Open
public static function df($df_param = "", $get_inodes = true)
{
$arrResult = array();
if (CommonFunctions::executeProgram('mount', '', $mount, PSI_DEBUG)) {
$mount = preg_split("/\n/", $mount, -1, PREG_SPLIT_NO_EMPTY);
- Read upRead up
- Exclude checks
CamelCaseVariableName
Since: 0.2
It is considered best practice to use the camelCase notation to name variables.
Example
class ClassName {
public function doSomething() {
$data_module = new DataModule();
}
}
Source
The variable $get_inodes is not named in camelCase. Open
public static function df($df_param = "", $get_inodes = true)
{
$arrResult = array();
if (CommonFunctions::executeProgram('mount', '', $mount, PSI_DEBUG)) {
$mount = preg_split("/\n/", $mount, -1, PREG_SPLIT_NO_EMPTY);
- Read upRead up
- Exclude checks
CamelCaseVariableName
Since: 0.2
It is considered best practice to use the camelCase notation to name variables.
Example
class ClassName {
public function doSomething() {
$data_module = new DataModule();
}
}
Source
The variable $inode_buf is not named in camelCase. Open
public static function df($df_param = "", $get_inodes = true)
{
$arrResult = array();
if (CommonFunctions::executeProgram('mount', '', $mount, PSI_DEBUG)) {
$mount = preg_split("/\n/", $mount, -1, PREG_SPLIT_NO_EMPTY);
- Read upRead up
- Exclude checks
CamelCaseVariableName
Since: 0.2
It is considered best practice to use the camelCase notation to name variables.
Example
class ClassName {
public function doSomething() {
$data_module = new DataModule();
}
}
Source
The variable $df_buf1 is not named in camelCase. Open
public static function df($df_param = "", $get_inodes = true)
{
$arrResult = array();
if (CommonFunctions::executeProgram('mount', '', $mount, PSI_DEBUG)) {
$mount = preg_split("/\n/", $mount, -1, PREG_SPLIT_NO_EMPTY);
- Read upRead up
- Exclude checks
CamelCaseVariableName
Since: 0.2
It is considered best practice to use the camelCase notation to name variables.
Example
class ClassName {
public function doSomething() {
$data_module = new DataModule();
}
}