Function _temperature has a Cognitive Complexity of 89 (exceeds 5 allowed). Consider refactoring. Open
private function _temperature()
{
if (PSI_OS == 'WINNT') {
if ($this->_buf) foreach ($this->_buf as $buffer) {
if (isset($buffer['CurrentTemperature']) && (($value = ($buffer['CurrentTemperature'] - 2732)/10) > -100)) {- Read upRead up
Cognitive Complexity
Cognitive Complexity is a measure of how difficult a unit of code is to intuitively understand. Unlike Cyclomatic Complexity, which determines how difficult your code will be to test, Cognitive Complexity tells you how difficult your code will be to read and comprehend.
A method's cognitive complexity is based on a few simple rules:
- Code is not considered more complex when it uses shorthand that the language provides for collapsing multiple statements into one
- Code is considered more complex for each "break in the linear flow of the code"
- Code is considered more complex when "flow breaking structures are nested"
Further reading
Method _temperature has 69 lines of code (exceeds 25 allowed). Consider refactoring. Open
private function _temperature()
{
if (PSI_OS == 'WINNT') {
if ($this->_buf) foreach ($this->_buf as $buffer) {
if (isset($buffer['CurrentTemperature']) && (($value = ($buffer['CurrentTemperature'] - 2732)/10) > -100)) {The method _temperature() has an NPath complexity of 850. The configured NPath complexity threshold is 200. Open
private function _temperature()
{
if (PSI_OS == 'WINNT') {
if ($this->_buf) foreach ($this->_buf as $buffer) {
if (isset($buffer['CurrentTemperature']) && (($value = ($buffer['CurrentTemperature'] - 2732)/10) > -100)) {- Read upRead up
- Exclude checks
NPathComplexity
Since: 0.1
The NPath complexity of a method is the number of acyclic execution paths through that method. A threshold of 200 is generally considered the point where measures should be taken to reduce complexity.
Example
class Foo {
function bar() {
// lots of complicated code
}
}Source https://phpmd.org/rules/codesize.html#npathcomplexity
The method _temperature() has a Cyclomatic Complexity of 36. The configured cyclomatic complexity threshold is 10. Open
private function _temperature()
{
if (PSI_OS == 'WINNT') {
if ($this->_buf) foreach ($this->_buf as $buffer) {
if (isset($buffer['CurrentTemperature']) && (($value = ($buffer['CurrentTemperature'] - 2732)/10) > -100)) {- Read upRead up
- Exclude checks
CyclomaticComplexity
Since: 0.1
Complexity is determined by the number of decision points in a method plus one for the method entry. The decision points are 'if', 'while', 'for', and 'case labels'. Generally, 1-4 is low complexity, 5-7 indicates moderate complexity, 8-10 is high complexity, and 11+ is very high complexity.
Example
// Cyclomatic Complexity = 11
class Foo {
1 public function example() {
2 if ($a == $b) {
3 if ($a1 == $b1) {
fiddle();
4 } elseif ($a2 == $b2) {
fiddle();
} else {
fiddle();
}
5 } elseif ($c == $d) {
6 while ($c == $d) {
fiddle();
}
7 } elseif ($e == $f) {
8 for ($n = 0; $n < $h; $n++) {
fiddle();
}
} else {
switch ($z) {
9 case 1:
fiddle();
break;
10 case 2:
fiddle();
break;
11 case 3:
fiddle();
break;
default:
fiddle();
break;
}
}
}
}Source https://phpmd.org/rules/codesize.html#cyclomaticcomplexity
Missing class import via use statement (line '85', column '36'). Open
$dev = new SensorDevice();- Read upRead up
- Exclude checks
MissingImport
Since: 2.7.0
Importing all external classes in a file through use statements makes them clearly visible.
Example
function make() {
return new \stdClass();
}Source http://phpmd.org/rules/cleancode.html#MissingImport
Missing class import via use statement (line '55', column '32'). Open
$dev = new SensorDevice();- Read upRead up
- Exclude checks
MissingImport
Since: 2.7.0
Importing all external classes in a file through use statements makes them clearly visible.
Example
function make() {
return new \stdClass();
}Source http://phpmd.org/rules/cleancode.html#MissingImport
Missing class import via use statement (line '34', column '35'). Open
$objLocator = new COM('WbemScripting.SWbemLocator');- Read upRead up
- Exclude checks
MissingImport
Since: 2.7.0
Importing all external classes in a file through use statements makes them clearly visible.
Example
function make() {
return new \stdClass();
}Source http://phpmd.org/rules/cleancode.html#MissingImport
Missing class import via use statement (line '114', column '36'). Open
$dev = new SensorDevice();- Read upRead up
- Exclude checks
MissingImport
Since: 2.7.0
Importing all external classes in a file through use statements makes them clearly visible.
Example
function make() {
return new \stdClass();
}Source http://phpmd.org/rules/cleancode.html#MissingImport
The method _temperature uses an else expression. Else clauses are basically not necessary and you can simplify the code by not using them. Open
} else {
$div = 1;
}- Read upRead up
- Exclude checks
ElseExpression
Since: 1.4.0
An if expression with an else branch is basically not necessary. You can rewrite the conditions in a way that the else clause is not necessary and the code becomes simpler to read. To achieve this, use early return statements, though you may need to split the code it several smaller methods. For very simple assignments you could also use the ternary operations.
Example
class Foo
{
public function bar($flag)
{
if ($flag) {
// one branch
} else {
// another branch
}
}
}Source https://phpmd.org/rules/cleancode.html#elseexpression
Avoid using static access to class 'CommonFunctions' in method '__construct'. Open
$this->_buf = CommonFunctions::getWMI($_wmi, 'MSAcpi_ThermalZoneTemperature', array('InstanceName', 'CriticalTripPoint', 'CurrentTemperature'));- Read upRead up
- Exclude checks
StaticAccess
Since: 1.4.0
Static access causes unexchangeable dependencies to other classes and leads to hard to test code. Avoid using static access at all costs and instead inject dependencies through the constructor. The only case when static access is acceptable is when used for factory methods.
Example
class Foo
{
public function bar()
{
Bar::baz();
}
}Source https://phpmd.org/rules/cleancode.html#staticaccess
Avoid assigning values to variables in if clauses and the like (line '74', column '108'). Open
private function _temperature()
{
if (PSI_OS == 'WINNT') {
if ($this->_buf) foreach ($this->_buf as $buffer) {
if (isset($buffer['CurrentTemperature']) && (($value = ($buffer['CurrentTemperature'] - 2732)/10) > -100)) {- Read upRead up
- Exclude checks
IfStatementAssignment
Since: 2.7.0
Assignments in if clauses and the like are considered a code smell. Assignments in PHP return the right operand as their result. In many cases, this is an expected behavior, but can lead to many difficult to spot bugs, especially when the right operand could result in zero, null or an empty string and the like.
Example
class Foo
{
public function bar($flag)
{
if ($foo = 'bar') { // possible typo
// ...
}
if ($baz = 0) { // always false
// ...
}
}
}Source http://phpmd.org/rules/cleancode.html#ifstatementassignment
The method _temperature uses an else expression. Else clauses are basically not necessary and you can simplify the code by not using them. Open
} else {
$dev->setName('ThermalZone THM0_0');
}- Read upRead up
- Exclude checks
ElseExpression
Since: 1.4.0
An if expression with an else branch is basically not necessary. You can rewrite the conditions in a way that the else clause is not necessary and the code becomes simpler to read. To achieve this, use early return statements, though you may need to split the code it several smaller methods. For very simple assignments you could also use the ternary operations.
Example
class Foo
{
public function bar($flag)
{
if ($flag) {
// one branch
} else {
// another branch
}
}
}Source https://phpmd.org/rules/cleancode.html#elseexpression
Avoid assigning values to variables in if clauses and the like (line '89', column '129'). Open
private function _temperature()
{
if (PSI_OS == 'WINNT') {
if ($this->_buf) foreach ($this->_buf as $buffer) {
if (isset($buffer['CurrentTemperature']) && (($value = ($buffer['CurrentTemperature'] - 2732)/10) > -100)) {- Read upRead up
- Exclude checks
IfStatementAssignment
Since: 2.7.0
Assignments in if clauses and the like are considered a code smell. Assignments in PHP return the right operand as their result. In many cases, this is an expected behavior, but can lead to many difficult to spot bugs, especially when the right operand could result in zero, null or an empty string and the like.
Example
class Foo
{
public function bar($flag)
{
if ($foo = 'bar') { // possible typo
// ...
}
if ($baz = 0) { // always false
// ...
}
}
}Source http://phpmd.org/rules/cleancode.html#ifstatementassignment
Avoid using static access to class 'CommonFunctions' in method '_temperature'. Open
if (CommonFunctions::rfts($thermalzonetemp, $temp, 1, 4096, false) && !is_null($temp) && (($temp = trim($temp)) != "")) {- Read upRead up
- Exclude checks
StaticAccess
Since: 1.4.0
Static access causes unexchangeable dependencies to other classes and leads to hard to test code. Avoid using static access at all costs and instead inject dependencies through the constructor. The only case when static access is acceptable is when used for factory methods.
Example
class Foo
{
public function bar()
{
Bar::baz();
}
}Source https://phpmd.org/rules/cleancode.html#staticaccess
Avoid using static access to class 'CommonFunctions' in method '_temperature'. Open
if (CommonFunctions::rfts($thermalzone, $temp, 1, 4096, false) && !is_null($temp) && (($temp = trim($temp)) != "")) {- Read upRead up
- Exclude checks
StaticAccess
Since: 1.4.0
Static access causes unexchangeable dependencies to other classes and leads to hard to test code. Avoid using static access at all costs and instead inject dependencies through the constructor. The only case when static access is acceptable is when used for factory methods.
Example
class Foo
{
public function bar()
{
Bar::baz();
}
}Source https://phpmd.org/rules/cleancode.html#staticaccess
Avoid assigning values to variables in if clauses and the like (line '62', column '66'). Open
private function _temperature()
{
if (PSI_OS == 'WINNT') {
if ($this->_buf) foreach ($this->_buf as $buffer) {
if (isset($buffer['CurrentTemperature']) && (($value = ($buffer['CurrentTemperature'] - 2732)/10) > -100)) {- Read upRead up
- Exclude checks
IfStatementAssignment
Since: 2.7.0
Assignments in if clauses and the like are considered a code smell. Assignments in PHP return the right operand as their result. In many cases, this is an expected behavior, but can lead to many difficult to spot bugs, especially when the right operand could result in zero, null or an empty string and the like.
Example
class Foo
{
public function bar($flag)
{
if ($foo = 'bar') { // possible typo
// ...
}
if ($baz = 0) { // always false
// ...
}
}
}Source http://phpmd.org/rules/cleancode.html#ifstatementassignment
Avoid using static access to class 'CommonFunctions' in method '_temperature'. Open
if (CommonFunctions::rfts($thermalzone.'trip_point_0_temp', $temp_max, 1, 4096, false) && !is_null($temp_max) && (($temp_max = trim($temp_max)) != "") && ($temp_max > -40)) {- Read upRead up
- Exclude checks
StaticAccess
Since: 1.4.0
Static access causes unexchangeable dependencies to other classes and leads to hard to test code. Avoid using static access at all costs and instead inject dependencies through the constructor. The only case when static access is acceptable is when used for factory methods.
Example
class Foo
{
public function bar()
{
Bar::baz();
}
}Source https://phpmd.org/rules/cleancode.html#staticaccess
Avoid assigning values to variables in if clauses and the like (line '96', column '140'). Open
private function _temperature()
{
if (PSI_OS == 'WINNT') {
if ($this->_buf) foreach ($this->_buf as $buffer) {
if (isset($buffer['CurrentTemperature']) && (($value = ($buffer['CurrentTemperature'] - 2732)/10) > -100)) {- Read upRead up
- Exclude checks
IfStatementAssignment
Since: 2.7.0
Assignments in if clauses and the like are considered a code smell. Assignments in PHP return the right operand as their result. In many cases, this is an expected behavior, but can lead to many difficult to spot bugs, especially when the right operand could result in zero, null or an empty string and the like.
Example
class Foo
{
public function bar($flag)
{
if ($foo = 'bar') { // possible typo
// ...
}
if ($baz = 0) { // always false
// ...
}
}
}Source http://phpmd.org/rules/cleancode.html#ifstatementassignment
Avoid using static access to class 'CommonFunctions' in method '_temperature'. Open
if (CommonFunctions::rfts($thermalzone.'type', $temp_type, 1, 4096, false) && !is_null($temp_type) && (($temp_type = trim($temp_type)) != "")) {- Read upRead up
- Exclude checks
StaticAccess
Since: 1.4.0
Static access causes unexchangeable dependencies to other classes and leads to hard to test code. Avoid using static access at all costs and instead inject dependencies through the constructor. The only case when static access is acceptable is when used for factory methods.
Example
class Foo
{
public function bar()
{
Bar::baz();
}
}Source https://phpmd.org/rules/cleancode.html#staticaccess
The method _temperature uses an else expression. Else clauses are basically not necessary and you can simplify the code by not using them. Open
} else {
$dev->setName("ThermalZone");
}- Read upRead up
- Exclude checks
ElseExpression
Since: 1.4.0
An if expression with an else branch is basically not necessary. You can rewrite the conditions in a way that the else clause is not necessary and the code becomes simpler to read. To achieve this, use early return statements, though you may need to split the code it several smaller methods. For very simple assignments you could also use the ternary operations.
Example
class Foo
{
public function bar($flag)
{
if ($flag) {
// one branch
} else {
// another branch
}
}
}Source https://phpmd.org/rules/cleancode.html#elseexpression
The method _temperature uses an else expression. Else clauses are basically not necessary and you can simplify the code by not using them. Open
} else {
$notwas = true;
$thermalzones = glob('/sys/class/thermal/thermal_zone*/');
if (is_array($thermalzones) && (count($thermalzones) > 0)) foreach ($thermalzones as $thermalzone) {
$thermalzonetemp = $thermalzone.'temp';- Read upRead up
- Exclude checks
ElseExpression
Since: 1.4.0
An if expression with an else branch is basically not necessary. You can rewrite the conditions in a way that the else clause is not necessary and the code becomes simpler to read. To achieve this, use early return statements, though you may need to split the code it several smaller methods. For very simple assignments you could also use the ternary operations.
Example
class Foo
{
public function bar($flag)
{
if ($flag) {
// one branch
} else {
// another branch
}
}
}Source https://phpmd.org/rules/cleancode.html#elseexpression
Avoid assigning values to variables in if clauses and the like (line '54', column '63'). Open
private function _temperature()
{
if (PSI_OS == 'WINNT') {
if ($this->_buf) foreach ($this->_buf as $buffer) {
if (isset($buffer['CurrentTemperature']) && (($value = ($buffer['CurrentTemperature'] - 2732)/10) > -100)) {- Read upRead up
- Exclude checks
IfStatementAssignment
Since: 2.7.0
Assignments in if clauses and the like are considered a code smell. Assignments in PHP return the right operand as their result. In many cases, this is an expected behavior, but can lead to many difficult to spot bugs, especially when the right operand could result in zero, null or an empty string and the like.
Example
class Foo
{
public function bar($flag)
{
if ($foo = 'bar') { // possible typo
// ...
}
if ($baz = 0) { // always false
// ...
}
}
}Source http://phpmd.org/rules/cleancode.html#ifstatementassignment
Avoid assigning values to variables in if clauses and the like (line '113', column '108'). Open
private function _temperature()
{
if (PSI_OS == 'WINNT') {
if ($this->_buf) foreach ($this->_buf as $buffer) {
if (isset($buffer['CurrentTemperature']) && (($value = ($buffer['CurrentTemperature'] - 2732)/10) > -100)) {- Read upRead up
- Exclude checks
IfStatementAssignment
Since: 2.7.0
Assignments in if clauses and the like are considered a code smell. Assignments in PHP return the right operand as their result. In many cases, this is an expected behavior, but can lead to many difficult to spot bugs, especially when the right operand could result in zero, null or an empty string and the like.
Example
class Foo
{
public function bar($flag)
{
if ($foo = 'bar') { // possible typo
// ...
}
if ($baz = 0) { // always false
// ...
}
}
}Source http://phpmd.org/rules/cleancode.html#ifstatementassignment
The method _temperature uses an else expression. Else clauses are basically not necessary and you can simplify the code by not using them. Open
} else {
$dev->setName("ThermalZone");
}- Read upRead up
- Exclude checks
ElseExpression
Since: 1.4.0
An if expression with an else branch is basically not necessary. You can rewrite the conditions in a way that the else clause is not necessary and the code becomes simpler to read. To achieve this, use early return statements, though you may need to split the code it several smaller methods. For very simple assignments you could also use the ternary operations.
Example
class Foo
{
public function bar($flag)
{
if ($flag) {
// one branch
} else {
// another branch
}
}
}Source https://phpmd.org/rules/cleancode.html#elseexpression
The method _temperature uses an else expression. Else clauses are basically not necessary and you can simplify the code by not using them. Open
} else {
$this->mbinfo->setMbTemp($dev);
}- Read upRead up
- Exclude checks
ElseExpression
Since: 1.4.0
An if expression with an else branch is basically not necessary. You can rewrite the conditions in a way that the else clause is not necessary and the code becomes simpler to read. To achieve this, use early return statements, though you may need to split the code it several smaller methods. For very simple assignments you could also use the ternary operations.
Example
class Foo
{
public function bar($flag)
{
if ($flag) {
// one branch
} else {
// another branch
}
}
}Source https://phpmd.org/rules/cleancode.html#elseexpression
Each class must be in a namespace of at least one level (a top-level vendor name) Open
class ThermalZone extends Sensors- Exclude checks
The property $_buf is not named in camelCase. Open
class ThermalZone extends Sensors
{
/**
* holds the COM object that we pull all the WMI data from
*- Read upRead up
- Exclude checks
CamelCasePropertyName
Since: 0.2
It is considered best practice to use the camelCase notation to name attributes.
Example
class ClassName {
protected $property_name;
}Source
Method name "_temperature" should not be prefixed with an underscore to indicate visibility Open
private function _temperature()- Exclude checks
Property name "$_buf" should not be prefixed with an underscore to indicate visibility Open
private $_buf = array();- Exclude checks
Line exceeds 120 characters; contains 160 characters Open
$this->_buf = CommonFunctions::getWMI($_wmi, 'MSAcpi_ThermalZoneTemperature', array('InstanceName', 'CriticalTripPoint', 'CurrentTemperature'));- Exclude checks
Line exceeds 120 characters; contains 137 characters Open
if (CommonFunctions::rfts($thermalzone, $temp, 1, 4096, false) && !is_null($temp) && (($temp = trim($temp)) != "")) {- Exclude checks
Line exceeds 120 characters; contains 126 characters Open
if (isset($buffer['CriticalTripPoint']) && (($maxvalue = ($buffer['CriticalTripPoint'] - 2732)/10) > 0)) {- Exclude checks
Inline control structures are not allowed Open
if (is_array($thermalzones) && (count($thermalzones) > 0)) foreach ($thermalzones as $thermalzone) {- Exclude checks
Line exceeds 120 characters; contains 133 characters Open
$this->error->addError("WMI connect error", "PhpSysInfo can not connect to the WMI interface for ThermalZone data.");- Exclude checks
Line exceeds 120 characters; contains 123 characters Open
if (isset($buffer['InstanceName']) && preg_match("/([^\\\\ ]+)$/", $buffer['InstanceName'], $outbuf)) {- Exclude checks
Line exceeds 120 characters; contains 168 characters Open
if (CommonFunctions::rfts($thermalzone.'type', $temp_type, 1, 4096, false) && !is_null($temp_type) && (($temp_type = trim($temp_type)) != "")) {- Exclude checks
Line exceeds 120 characters; contains 137 characters Open
if (CommonFunctions::rfts($thermalzonetemp, $temp, 1, 4096, false) && !is_null($temp) && (($temp = trim($temp)) != "")) {- Exclude checks
Line exceeds 120 characters; contains 124 characters Open
if (isset($buffer['CurrentTemperature']) && (($value = ($buffer['CurrentTemperature'] - 2732)/10) > -100)) {- Exclude checks
Inline control structures are not allowed Open
if ($this->_buf) foreach ($this->_buf as $buffer) {- Exclude checks
Line exceeds 120 characters; contains 198 characters Open
if (CommonFunctions::rfts($thermalzone.'trip_point_0_temp', $temp_max, 1, 4096, false) && !is_null($temp_max) && (($temp_max = trim($temp_max)) != "") && ($temp_max > -40)) {- Exclude checks
Line exceeds 120 characters; contains 132 characters Open
* @license http://opensource.org/licenses/gpl-2.0.php GNU General Public License version 2, or (at your option) any later version- Exclude checks
Inline control structures are not allowed Open
if (is_array($thermalzones) && (count($thermalzones) > 0)) foreach ($thermalzones as $thermalzone) {- Exclude checks
Line indented incorrectly; expected at least 8 spaces, found 6 Open
$this->_temperature();- Exclude checks
Line indented incorrectly; expected at least 24 spaces, found 23 Open
$div = 1;- Exclude checks
Line indented incorrectly; expected at least 28 spaces, found 27 Open
$dev->setName("ThermalZone ".$name[1]);- Exclude checks
The variable $temp_type is not named in camelCase. Open
private function _temperature()
{
if (PSI_OS == 'WINNT') {
if ($this->_buf) foreach ($this->_buf as $buffer) {
if (isset($buffer['CurrentTemperature']) && (($value = ($buffer['CurrentTemperature'] - 2732)/10) > -100)) {- Read upRead up
- Exclude checks
CamelCaseVariableName
Since: 0.2
It is considered best practice to use the camelCase notation to name variables.
Example
class ClassName {
public function doSomething() {
$data_module = new DataModule();
}
}Source
The variable $temp_type is not named in camelCase. Open
private function _temperature()
{
if (PSI_OS == 'WINNT') {
if ($this->_buf) foreach ($this->_buf as $buffer) {
if (isset($buffer['CurrentTemperature']) && (($value = ($buffer['CurrentTemperature'] - 2732)/10) > -100)) {- Read upRead up
- Exclude checks
CamelCaseVariableName
Since: 0.2
It is considered best practice to use the camelCase notation to name variables.
Example
class ClassName {
public function doSomething() {
$data_module = new DataModule();
}
}Source
The variable $temp_max is not named in camelCase. Open
private function _temperature()
{
if (PSI_OS == 'WINNT') {
if ($this->_buf) foreach ($this->_buf as $buffer) {
if (isset($buffer['CurrentTemperature']) && (($value = ($buffer['CurrentTemperature'] - 2732)/10) > -100)) {- Read upRead up
- Exclude checks
CamelCaseVariableName
Since: 0.2
It is considered best practice to use the camelCase notation to name variables.
Example
class ClassName {
public function doSomething() {
$data_module = new DataModule();
}
}Source
The variable $temp_max is not named in camelCase. Open
private function _temperature()
{
if (PSI_OS == 'WINNT') {
if ($this->_buf) foreach ($this->_buf as $buffer) {
if (isset($buffer['CurrentTemperature']) && (($value = ($buffer['CurrentTemperature'] - 2732)/10) > -100)) {- Read upRead up
- Exclude checks
CamelCaseVariableName
Since: 0.2
It is considered best practice to use the camelCase notation to name variables.
Example
class ClassName {
public function doSomething() {
$data_module = new DataModule();
}
}Source
The variable $_wmi is not named in camelCase. Open
public function __construct()
{
parent::__construct();
if (PSI_OS == 'WINNT') {
$_wmi = null;- Read upRead up
- Exclude checks
CamelCaseVariableName
Since: 0.2
It is considered best practice to use the camelCase notation to name variables.
Example
class ClassName {
public function doSomething() {
$data_module = new DataModule();
}
}Source
The variable $temp_max is not named in camelCase. Open
private function _temperature()
{
if (PSI_OS == 'WINNT') {
if ($this->_buf) foreach ($this->_buf as $buffer) {
if (isset($buffer['CurrentTemperature']) && (($value = ($buffer['CurrentTemperature'] - 2732)/10) > -100)) {- Read upRead up
- Exclude checks
CamelCaseVariableName
Since: 0.2
It is considered best practice to use the camelCase notation to name variables.
Example
class ClassName {
public function doSomething() {
$data_module = new DataModule();
}
}Source
The variable $_wmi is not named in camelCase. Open
public function __construct()
{
parent::__construct();
if (PSI_OS == 'WINNT') {
$_wmi = null;- Read upRead up
- Exclude checks
CamelCaseVariableName
Since: 0.2
It is considered best practice to use the camelCase notation to name variables.
Example
class ClassName {
public function doSomething() {
$data_module = new DataModule();
}
}Source
The variable $temp_max is not named in camelCase. Open
private function _temperature()
{
if (PSI_OS == 'WINNT') {
if ($this->_buf) foreach ($this->_buf as $buffer) {
if (isset($buffer['CurrentTemperature']) && (($value = ($buffer['CurrentTemperature'] - 2732)/10) > -100)) {- Read upRead up
- Exclude checks
CamelCaseVariableName
Since: 0.2
It is considered best practice to use the camelCase notation to name variables.
Example
class ClassName {
public function doSomething() {
$data_module = new DataModule();
}
}Source
The variable $temp_type is not named in camelCase. Open
private function _temperature()
{
if (PSI_OS == 'WINNT') {
if ($this->_buf) foreach ($this->_buf as $buffer) {
if (isset($buffer['CurrentTemperature']) && (($value = ($buffer['CurrentTemperature'] - 2732)/10) > -100)) {- Read upRead up
- Exclude checks
CamelCaseVariableName
Since: 0.2
It is considered best practice to use the camelCase notation to name variables.
Example
class ClassName {
public function doSomething() {
$data_module = new DataModule();
}
}Source
The variable $temp_type is not named in camelCase. Open
private function _temperature()
{
if (PSI_OS == 'WINNT') {
if ($this->_buf) foreach ($this->_buf as $buffer) {
if (isset($buffer['CurrentTemperature']) && (($value = ($buffer['CurrentTemperature'] - 2732)/10) > -100)) {- Read upRead up
- Exclude checks
CamelCaseVariableName
Since: 0.2
It is considered best practice to use the camelCase notation to name variables.
Example
class ClassName {
public function doSomething() {
$data_module = new DataModule();
}
}Source
The variable $temp_max is not named in camelCase. Open
private function _temperature()
{
if (PSI_OS == 'WINNT') {
if ($this->_buf) foreach ($this->_buf as $buffer) {
if (isset($buffer['CurrentTemperature']) && (($value = ($buffer['CurrentTemperature'] - 2732)/10) > -100)) {- Read upRead up
- Exclude checks
CamelCaseVariableName
Since: 0.2
It is considered best practice to use the camelCase notation to name variables.
Example
class ClassName {
public function doSomething() {
$data_module = new DataModule();
}
}Source
The variable $temp_type is not named in camelCase. Open
private function _temperature()
{
if (PSI_OS == 'WINNT') {
if ($this->_buf) foreach ($this->_buf as $buffer) {
if (isset($buffer['CurrentTemperature']) && (($value = ($buffer['CurrentTemperature'] - 2732)/10) > -100)) {- Read upRead up
- Exclude checks
CamelCaseVariableName
Since: 0.2
It is considered best practice to use the camelCase notation to name variables.
Example
class ClassName {
public function doSomething() {
$data_module = new DataModule();
}
}Source
The variable $temp_max is not named in camelCase. Open
private function _temperature()
{
if (PSI_OS == 'WINNT') {
if ($this->_buf) foreach ($this->_buf as $buffer) {
if (isset($buffer['CurrentTemperature']) && (($value = ($buffer['CurrentTemperature'] - 2732)/10) > -100)) {- Read upRead up
- Exclude checks
CamelCaseVariableName
Since: 0.2
It is considered best practice to use the camelCase notation to name variables.
Example
class ClassName {
public function doSomething() {
$data_module = new DataModule();
}
}Source
The variable $temp_max is not named in camelCase. Open
private function _temperature()
{
if (PSI_OS == 'WINNT') {
if ($this->_buf) foreach ($this->_buf as $buffer) {
if (isset($buffer['CurrentTemperature']) && (($value = ($buffer['CurrentTemperature'] - 2732)/10) > -100)) {- Read upRead up
- Exclude checks
CamelCaseVariableName
Since: 0.2
It is considered best practice to use the camelCase notation to name variables.
Example
class ClassName {
public function doSomething() {
$data_module = new DataModule();
}
}Source
The variable $temp_max is not named in camelCase. Open
private function _temperature()
{
if (PSI_OS == 'WINNT') {
if ($this->_buf) foreach ($this->_buf as $buffer) {
if (isset($buffer['CurrentTemperature']) && (($value = ($buffer['CurrentTemperature'] - 2732)/10) > -100)) {- Read upRead up
- Exclude checks
CamelCaseVariableName
Since: 0.2
It is considered best practice to use the camelCase notation to name variables.
Example
class ClassName {
public function doSomething() {
$data_module = new DataModule();
}
}Source
The variable $_wmi is not named in camelCase. Open
public function __construct()
{
parent::__construct();
if (PSI_OS == 'WINNT') {
$_wmi = null;- Read upRead up
- Exclude checks
CamelCaseVariableName
Since: 0.2
It is considered best practice to use the camelCase notation to name variables.
Example
class ClassName {
public function doSomething() {
$data_module = new DataModule();
}
}Source
The variable $temp_max is not named in camelCase. Open
private function _temperature()
{
if (PSI_OS == 'WINNT') {
if ($this->_buf) foreach ($this->_buf as $buffer) {
if (isset($buffer['CurrentTemperature']) && (($value = ($buffer['CurrentTemperature'] - 2732)/10) > -100)) {- Read upRead up
- Exclude checks
CamelCaseVariableName
Since: 0.2
It is considered best practice to use the camelCase notation to name variables.
Example
class ClassName {
public function doSomething() {
$data_module = new DataModule();
}
}Source
The variable $_wmi is not named in camelCase. Open
public function __construct()
{
parent::__construct();
if (PSI_OS == 'WINNT') {
$_wmi = null;- Read upRead up
- Exclude checks
CamelCaseVariableName
Since: 0.2
It is considered best practice to use the camelCase notation to name variables.
Example
class ClassName {
public function doSomething() {
$data_module = new DataModule();
}
}Source
The variable $temp_type is not named in camelCase. Open
private function _temperature()
{
if (PSI_OS == 'WINNT') {
if ($this->_buf) foreach ($this->_buf as $buffer) {
if (isset($buffer['CurrentTemperature']) && (($value = ($buffer['CurrentTemperature'] - 2732)/10) > -100)) {- Read upRead up
- Exclude checks
CamelCaseVariableName
Since: 0.2
It is considered best practice to use the camelCase notation to name variables.
Example
class ClassName {
public function doSomething() {
$data_module = new DataModule();
}
}Source
The variable $temp_max is not named in camelCase. Open
private function _temperature()
{
if (PSI_OS == 'WINNT') {
if ($this->_buf) foreach ($this->_buf as $buffer) {
if (isset($buffer['CurrentTemperature']) && (($value = ($buffer['CurrentTemperature'] - 2732)/10) > -100)) {- Read upRead up
- Exclude checks
CamelCaseVariableName
Since: 0.2
It is considered best practice to use the camelCase notation to name variables.
Example
class ClassName {
public function doSomething() {
$data_module = new DataModule();
}
}Source
The method _temperature is not named in camelCase. Open
private function _temperature()
{
if (PSI_OS == 'WINNT') {
if ($this->_buf) foreach ($this->_buf as $buffer) {
if (isset($buffer['CurrentTemperature']) && (($value = ($buffer['CurrentTemperature'] - 2732)/10) > -100)) {- Read upRead up
- Exclude checks
CamelCaseMethodName
Since: 0.2
It is considered best practice to use the camelCase notation to name methods.
Example
class ClassName {
public function get_name() {
}
}