Function _network
has a Cognitive Complexity of 47 (exceeds 5 allowed). Consider refactoring. Open
private function _network()
{
CommonFunctions::executeProgram('netstat', '-nbdi | cut -c1-25,44- | grep "^[a-z]*[0-9][ \t].*Link"', $netstat_b);
CommonFunctions::executeProgram('netstat', '-ndi | cut -c1-25,44- | grep "^[a-z]*[0-9][ \t].*Link"', $netstat_n);
$lines_b = preg_split("/\n/", $netstat_b, -1, PREG_SPLIT_NO_EMPTY);
- Read upRead up
Cognitive Complexity
Cognitive Complexity is a measure of how difficult a unit of code is to intuitively understand. Unlike Cyclomatic Complexity, which determines how difficult your code will be to test, Cognitive Complexity tells you how difficult your code will be to read and comprehend.
A method's cognitive complexity is based on a few simple rules:
- Code is not considered more complex when it uses shorthand that the language provides for collapsing multiple statements into one
- Code is considered more complex for each "break in the linear flow of the code"
- Code is considered more complex when "flow breaking structures are nested"
Further reading
Function ide
has a Cognitive Complexity of 36 (exceeds 5 allowed). Consider refactoring. Open
protected function ide()
{
foreach ($this->readdmesg() as $line) {
if (preg_match('/^(.*) at (pciide|wdc|atabus|atapibus)[0-9]+ (.*): <(.*)>/', $line, $ar_buf)
|| preg_match('/^(.*) at (pciide|wdc|atabus|atapibus)[0-9]+ /', $line, $ar_buf)) {
- Read upRead up
Cognitive Complexity
Cognitive Complexity is a measure of how difficult a unit of code is to intuitively understand. Unlike Cyclomatic Complexity, which determines how difficult your code will be to test, Cognitive Complexity tells you how difficult your code will be to read and comprehend.
A method's cognitive complexity is based on a few simple rules:
- Code is not considered more complex when it uses shorthand that the language provides for collapsing multiple statements into one
- Code is considered more complex for each "break in the linear flow of the code"
- Code is considered more complex when "flow breaking structures are nested"
Further reading
The class NetBSD has an overall complexity of 56 which is very high. The configured complexity threshold is 50. Open
class NetBSD extends BSDCommon
{
/**
* define the regexp for log parser
*/
- Exclude checks
Function _processes
has a Cognitive Complexity of 18 (exceeds 5 allowed). Consider refactoring. Open
protected function _processes()
{
if (CommonFunctions::executeProgram('ps', 'aux', $bufr, PSI_DEBUG)) {
$lines = preg_split("/\n/", $bufr, -1, PREG_SPLIT_NO_EMPTY);
$processes['*'] = 0;
- Read upRead up
Cognitive Complexity
Cognitive Complexity is a measure of how difficult a unit of code is to intuitively understand. Unlike Cyclomatic Complexity, which determines how difficult your code will be to test, Cognitive Complexity tells you how difficult your code will be to read and comprehend.
A method's cognitive complexity is based on a few simple rules:
- Code is not considered more complex when it uses shorthand that the language provides for collapsing multiple statements into one
- Code is considered more complex for each "break in the linear flow of the code"
- Code is considered more complex when "flow breaking structures are nested"
Further reading
Method _network
has 43 lines of code (exceeds 25 allowed). Consider refactoring. Open
private function _network()
{
CommonFunctions::executeProgram('netstat', '-nbdi | cut -c1-25,44- | grep "^[a-z]*[0-9][ \t].*Link"', $netstat_b);
CommonFunctions::executeProgram('netstat', '-ndi | cut -c1-25,44- | grep "^[a-z]*[0-9][ \t].*Link"', $netstat_n);
$lines_b = preg_split("/\n/", $netstat_b, -1, PREG_SPLIT_NO_EMPTY);
Method ide
has 32 lines of code (exceeds 25 allowed). Consider refactoring. Open
protected function ide()
{
foreach ($this->readdmesg() as $line) {
if (preg_match('/^(.*) at (pciide|wdc|atabus|atapibus)[0-9]+ (.*): <(.*)>/', $line, $ar_buf)
|| preg_match('/^(.*) at (pciide|wdc|atabus|atapibus)[0-9]+ /', $line, $ar_buf)) {
Avoid deeply nested control flow statements. Open
if (!defined('PSI_HIDE_NETWORK_MACADDR') || !PSI_HIDE_NETWORK_MACADDR) $dev->setInfo(($dev->getInfo()?$dev->getInfo().';':'').preg_replace('/:/', '-', strtoupper($ar_buf2[1])));
The method ide() has a Cyclomatic Complexity of 13. The configured cyclomatic complexity threshold is 10. Open
protected function ide()
{
foreach ($this->readdmesg() as $line) {
if (preg_match('/^(.*) at (pciide|wdc|atabus|atapibus)[0-9]+ (.*): <(.*)>/', $line, $ar_buf)
|| preg_match('/^(.*) at (pciide|wdc|atabus|atapibus)[0-9]+ /', $line, $ar_buf)) {
- Read upRead up
- Exclude checks
CyclomaticComplexity
Since: 0.1
Complexity is determined by the number of decision points in a method plus one for the method entry. The decision points are 'if', 'while', 'for', and 'case labels'. Generally, 1-4 is low complexity, 5-7 indicates moderate complexity, 8-10 is high complexity, and 11+ is very high complexity.
Example
// Cyclomatic Complexity = 11
class Foo {
1 public function example() {
2 if ($a == $b) {
3 if ($a1 == $b1) {
fiddle();
4 } elseif ($a2 == $b2) {
fiddle();
} else {
fiddle();
}
5 } elseif ($c == $d) {
6 while ($c == $d) {
fiddle();
}
7 } elseif ($e == $f) {
8 for ($n = 0; $n < $h; $n++) {
fiddle();
}
} else {
switch ($z) {
9 case 1:
fiddle();
break;
10 case 2:
fiddle();
break;
11 case 3:
fiddle();
break;
default:
fiddle();
break;
}
}
}
}
Source https://phpmd.org/rules/codesize.html#cyclomaticcomplexity
The method _network() has a Cyclomatic Complexity of 27. The configured cyclomatic complexity threshold is 10. Open
private function _network()
{
CommonFunctions::executeProgram('netstat', '-nbdi | cut -c1-25,44- | grep "^[a-z]*[0-9][ \t].*Link"', $netstat_b);
CommonFunctions::executeProgram('netstat', '-ndi | cut -c1-25,44- | grep "^[a-z]*[0-9][ \t].*Link"', $netstat_n);
$lines_b = preg_split("/\n/", $netstat_b, -1, PREG_SPLIT_NO_EMPTY);
- Read upRead up
- Exclude checks
CyclomaticComplexity
Since: 0.1
Complexity is determined by the number of decision points in a method plus one for the method entry. The decision points are 'if', 'while', 'for', and 'case labels'. Generally, 1-4 is low complexity, 5-7 indicates moderate complexity, 8-10 is high complexity, and 11+ is very high complexity.
Example
// Cyclomatic Complexity = 11
class Foo {
1 public function example() {
2 if ($a == $b) {
3 if ($a1 == $b1) {
fiddle();
4 } elseif ($a2 == $b2) {
fiddle();
} else {
fiddle();
}
5 } elseif ($c == $d) {
6 while ($c == $d) {
fiddle();
}
7 } elseif ($e == $f) {
8 for ($n = 0; $n < $h; $n++) {
fiddle();
}
} else {
switch ($z) {
9 case 1:
fiddle();
break;
10 case 2:
fiddle();
break;
11 case 3:
fiddle();
break;
default:
fiddle();
break;
}
}
}
}
Source https://phpmd.org/rules/codesize.html#cyclomaticcomplexity
Avoid using undefined variables such as '$bufr' which will lead to PHP notices. Open
$lines = preg_split("/\n/", $bufr, -1, PREG_SPLIT_NO_EMPTY);
- Read upRead up
- Exclude checks
UndefinedVariable
Since: 2.8.0
Detects when a variable is used that has not been defined before.
Example
class Foo
{
private function bar()
{
// $message is undefined
echo $message;
}
}
Source https://phpmd.org/rules/cleancode.html#undefinedvariable
Avoid using undefined variables such as '$bufr2' which will lead to PHP notices. Open
if (defined('PSI_SHOW_NETWORK_INFOS') && (PSI_SHOW_NETWORK_INFOS) && (CommonFunctions::executeProgram('ifconfig', $ar_buf_b[0].' 2>/dev/null', $bufr2, PSI_DEBUG))) {
- Read upRead up
- Exclude checks
UndefinedVariable
Since: 2.8.0
Detects when a variable is used that has not been defined before.
Example
class Foo
{
private function bar()
{
// $message is undefined
echo $message;
}
}
Source https://phpmd.org/rules/cleancode.html#undefinedvariable
Avoid using undefined variables such as '$netstat_n' which will lead to PHP notices. Open
$lines_n = preg_split("/\n/", $netstat_n, -1, PREG_SPLIT_NO_EMPTY);
- Read upRead up
- Exclude checks
UndefinedVariable
Since: 2.8.0
Detects when a variable is used that has not been defined before.
Example
class Foo
{
private function bar()
{
// $message is undefined
echo $message;
}
}
Source https://phpmd.org/rules/cleancode.html#undefinedvariable
Avoid using undefined variables such as '$processes' which will lead to PHP notices. Open
if ($processes['*'] > 0) {
- Read upRead up
- Exclude checks
UndefinedVariable
Since: 2.8.0
Detects when a variable is used that has not been defined before.
Example
class Foo
{
private function bar()
{
// $message is undefined
echo $message;
}
}
Source https://phpmd.org/rules/cleancode.html#undefinedvariable
Avoid using undefined variables such as '$netstat_b' which will lead to PHP notices. Open
CommonFunctions::executeProgram('netstat', '-nbdi | cut -c1-25,44- | grep "^[a-z]*[0-9][ \t].*Link"', $netstat_b);
- Read upRead up
- Exclude checks
UndefinedVariable
Since: 2.8.0
Detects when a variable is used that has not been defined before.
Example
class Foo
{
private function bar()
{
// $message is undefined
echo $message;
}
}
Source https://phpmd.org/rules/cleancode.html#undefinedvariable
Avoid using undefined variables such as '$bufr' which will lead to PHP notices. Open
if (CommonFunctions::executeProgram('ps', 'aux', $bufr, PSI_DEBUG)) {
- Read upRead up
- Exclude checks
UndefinedVariable
Since: 2.8.0
Detects when a variable is used that has not been defined before.
Example
class Foo
{
private function bar()
{
// $message is undefined
echo $message;
}
}
Source https://phpmd.org/rules/cleancode.html#undefinedvariable
Avoid using undefined variables such as '$processes' which will lead to PHP notices. Open
$processes['*'] = 0;
- Read upRead up
- Exclude checks
UndefinedVariable
Since: 2.8.0
Detects when a variable is used that has not been defined before.
Example
class Foo
{
private function bar()
{
// $message is undefined
echo $message;
}
}
Source https://phpmd.org/rules/cleancode.html#undefinedvariable
Avoid using undefined variables such as '$processes' which will lead to PHP notices. Open
if (isset($processes[$state])) {
- Read upRead up
- Exclude checks
UndefinedVariable
Since: 2.8.0
Detects when a variable is used that has not been defined before.
Example
class Foo
{
private function bar()
{
// $message is undefined
echo $message;
}
}
Source https://phpmd.org/rules/cleancode.html#undefinedvariable
Avoid using undefined variables such as '$processes' which will lead to PHP notices. Open
$processes['*']++;
- Read upRead up
- Exclude checks
UndefinedVariable
Since: 2.8.0
Detects when a variable is used that has not been defined before.
Example
class Foo
{
private function bar()
{
// $message is undefined
echo $message;
}
}
Source https://phpmd.org/rules/cleancode.html#undefinedvariable
Avoid using undefined variables such as '$processes' which will lead to PHP notices. Open
$processes[$state]++;
- Read upRead up
- Exclude checks
UndefinedVariable
Since: 2.8.0
Detects when a variable is used that has not been defined before.
Example
class Foo
{
private function bar()
{
// $message is undefined
echo $message;
}
}
Source https://phpmd.org/rules/cleancode.html#undefinedvariable
Avoid using undefined variables such as '$netstat_n' which will lead to PHP notices. Open
CommonFunctions::executeProgram('netstat', '-ndi | cut -c1-25,44- | grep "^[a-z]*[0-9][ \t].*Link"', $netstat_n);
- Read upRead up
- Exclude checks
UndefinedVariable
Since: 2.8.0
Detects when a variable is used that has not been defined before.
Example
class Foo
{
private function bar()
{
// $message is undefined
echo $message;
}
}
Source https://phpmd.org/rules/cleancode.html#undefinedvariable
Avoid using undefined variables such as '$bufr2' which will lead to PHP notices. Open
$bufe2 = preg_split("/\n/", $bufr2, -1, PREG_SPLIT_NO_EMPTY);
- Read upRead up
- Exclude checks
UndefinedVariable
Since: 2.8.0
Detects when a variable is used that has not been defined before.
Example
class Foo
{
private function bar()
{
// $message is undefined
echo $message;
}
}
Source https://phpmd.org/rules/cleancode.html#undefinedvariable
Avoid using undefined variables such as '$processes' which will lead to PHP notices. Open
$processes[$state] = 1;
- Read upRead up
- Exclude checks
UndefinedVariable
Since: 2.8.0
Detects when a variable is used that has not been defined before.
Example
class Foo
{
private function bar()
{
// $message is undefined
echo $message;
}
}
Source https://phpmd.org/rules/cleancode.html#undefinedvariable
Avoid using undefined variables such as '$netstat_b' which will lead to PHP notices. Open
$lines_b = preg_split("/\n/", $netstat_b, -1, PREG_SPLIT_NO_EMPTY);
- Read upRead up
- Exclude checks
UndefinedVariable
Since: 2.8.0
Detects when a variable is used that has not been defined before.
Example
class Foo
{
private function bar()
{
// $message is undefined
echo $message;
}
}
Source https://phpmd.org/rules/cleancode.html#undefinedvariable
Avoid using undefined variables such as '$processes' which will lead to PHP notices. Open
$this->sys->setProcesses($processes);
- Read upRead up
- Exclude checks
UndefinedVariable
Since: 2.8.0
Detects when a variable is used that has not been defined before.
Example
class Foo
{
private function bar()
{
// $message is undefined
echo $message;
}
}
Source https://phpmd.org/rules/cleancode.html#undefinedvariable
Missing class import via use statement (line '117', column '28'). Open
$dev = new HWDevice();
- Read upRead up
- Exclude checks
MissingImport
Since: 2.7.0
Importing all external classes in a file through use statements makes them clearly visible.
Example
function make() {
return new \stdClass();
}
Source http://phpmd.org/rules/cleancode.html#MissingImport
The method __construct has a boolean flag argument $blockname, which is a certain sign of a Single Responsibility Principle violation. Open
public function __construct($blockname = false)
- Read upRead up
- Exclude checks
BooleanArgumentFlag
Since: 1.4.0
A boolean flag argument is a reliable indicator for a violation of the Single Responsibility Principle (SRP). You can fix this problem by extracting the logic in the boolean flag into its own class or method.
Example
class Foo {
public function bar($flag = true) {
}
}
Source https://phpmd.org/rules/cleancode.html#booleanargumentflag
Missing class import via use statement (line '70', column '28'). Open
$dev = new NetDevice();
- Read upRead up
- Exclude checks
MissingImport
Since: 2.7.0
Importing all external classes in a file through use statements makes them clearly visible.
Example
function make() {
return new \stdClass();
}
Source http://phpmd.org/rules/cleancode.html#MissingImport
Avoid using static access to class 'CommonFunctions' in method '_network'. Open
if (defined('PSI_SHOW_NETWORK_INFOS') && (PSI_SHOW_NETWORK_INFOS) && (CommonFunctions::executeProgram('ifconfig', $ar_buf_b[0].' 2>/dev/null', $bufr2, PSI_DEBUG))) {
- Read upRead up
- Exclude checks
StaticAccess
Since: 1.4.0
Static access causes unexchangeable dependencies to other classes and leads to hard to test code. Avoid using static access at all costs and instead inject dependencies through the constructor. The only case when static access is acceptable is when used for factory methods.
Example
class Foo
{
public function bar()
{
Bar::baz();
}
}
Source https://phpmd.org/rules/cleancode.html#staticaccess
The method _network uses an else expression. Else clauses are basically not necessary and you can simplify the code by not using them. Open
} else {
$unit = "M";
}
- Read upRead up
- Exclude checks
ElseExpression
Since: 1.4.0
An if expression with an else branch is basically not necessary. You can rewrite the conditions in a way that the else clause is not necessary and the code becomes simpler to read. To achieve this, use early return statements, though you may need to split the code it several smaller methods. For very simple assignments you could also use the ternary operations.
Example
class Foo
{
public function bar($flag)
{
if ($flag) {
// one branch
} else {
// another branch
}
}
}
Source https://phpmd.org/rules/cleancode.html#elseexpression
The method ide uses an else expression. Else clauses are basically not necessary and you can simplify the code by not using them. Open
} else {
$dev->setName($ar_buf[1]);
// now loop again and find the name
foreach ($this->readdmesg() as $line2) {
if (preg_match("/^(".$ar_buf[1]."): <(.*)>$/", $line2, $ar_buf_n)) {
- Read upRead up
- Exclude checks
ElseExpression
Since: 1.4.0
An if expression with an else branch is basically not necessary. You can rewrite the conditions in a way that the else clause is not necessary and the code becomes simpler to read. To achieve this, use early return statements, though you may need to split the code it several smaller methods. For very simple assignments you could also use the ternary operations.
Example
class Foo
{
public function bar($flag)
{
if ($flag) {
// one branch
} else {
// another branch
}
}
}
Source https://phpmd.org/rules/cleancode.html#elseexpression
Avoid using static access to class 'CommonFunctions' in method '_network'. Open
CommonFunctions::executeProgram('netstat', '-ndi | cut -c1-25,44- | grep "^[a-z]*[0-9][ \t].*Link"', $netstat_n);
- Read upRead up
- Exclude checks
StaticAccess
Since: 1.4.0
Static access causes unexchangeable dependencies to other classes and leads to hard to test code. Avoid using static access at all costs and instead inject dependencies through the constructor. The only case when static access is acceptable is when used for factory methods.
Example
class Foo
{
public function bar()
{
Bar::baz();
}
}
Source https://phpmd.org/rules/cleancode.html#staticaccess
Avoid using static access to class 'CommonFunctions' in method '_processes'. Open
if (CommonFunctions::executeProgram('ps', 'aux', $bufr, PSI_DEBUG)) {
- Read upRead up
- Exclude checks
StaticAccess
Since: 1.4.0
Static access causes unexchangeable dependencies to other classes and leads to hard to test code. Avoid using static access at all costs and instead inject dependencies through the constructor. The only case when static access is acceptable is when used for factory methods.
Example
class Foo
{
public function bar()
{
Bar::baz();
}
}
Source https://phpmd.org/rules/cleancode.html#staticaccess
The method _processes uses an else expression. Else clauses are basically not necessary and you can simplify the code by not using them. Open
} else {
$processes[$state] = 1;
}
- Read upRead up
- Exclude checks
ElseExpression
Since: 1.4.0
An if expression with an else branch is basically not necessary. You can rewrite the conditions in a way that the else clause is not necessary and the code becomes simpler to read. To achieve this, use early return statements, though you may need to split the code it several smaller methods. For very simple assignments you could also use the ternary operations.
Example
class Foo
{
public function bar($flag)
{
if ($flag) {
// one branch
} else {
// another branch
}
}
}
Source https://phpmd.org/rules/cleancode.html#elseexpression
Avoid using static access to class 'CommonFunctions' in method '_network'. Open
CommonFunctions::executeProgram('netstat', '-nbdi | cut -c1-25,44- | grep "^[a-z]*[0-9][ \t].*Link"', $netstat_b);
- Read upRead up
- Exclude checks
StaticAccess
Since: 1.4.0
Static access causes unexchangeable dependencies to other classes and leads to hard to test code. Avoid using static access at all costs and instead inject dependencies through the constructor. The only case when static access is acceptable is when used for factory methods.
Example
class Foo
{
public function bar()
{
Bar::baz();
}
}
Source https://phpmd.org/rules/cleancode.html#staticaccess
Similar blocks of code found in 2 locations. Consider refactoring. Open
if (defined('PSI_SHOW_NETWORK_INFOS') && (PSI_SHOW_NETWORK_INFOS) && (CommonFunctions::executeProgram('ifconfig', $ar_buf_b[0].' 2>/dev/null', $bufr2, PSI_DEBUG))) {
$speedinfo = "";
$bufe2 = preg_split("/\n/", $bufr2, -1, PREG_SPLIT_NO_EMPTY);
foreach ($bufe2 as $buf2) {
if (preg_match('/^\s+address:\s+(\S+)/i', $buf2, $ar_buf2)) {
- Read upRead up
Duplicated Code
Duplicated code can lead to software that is hard to understand and difficult to change. The Don't Repeat Yourself (DRY) principle states:
Every piece of knowledge must have a single, unambiguous, authoritative representation within a system.
When you violate DRY, bugs and maintenance problems are sure to follow. Duplicated code has a tendency to both continue to replicate and also to diverge (leaving bugs as two similar implementations differ in subtle ways).
Tuning
This issue has a mass of 531.
We set useful threshold defaults for the languages we support but you may want to adjust these settings based on your project guidelines.
The threshold configuration represents the minimum mass a code block must have to be analyzed for duplication. The lower the threshold, the more fine-grained the comparison.
If the engine is too easily reporting duplication, try raising the threshold. If you suspect that the engine isn't catching enough duplication, try lowering the threshold. The best setting tends to differ from language to language.
See codeclimate-duplication
's documentation for more information about tuning the mass threshold in your .codeclimate.yml
.
Refactorings
- Extract Method
- Extract Class
- Form Template Method
- Introduce Null Object
- Pull Up Method
- Pull Up Field
- Substitute Algorithm
Further Reading
- Don't Repeat Yourself on the C2 Wiki
- Duplicated Code on SourceMaking
- Refactoring: Improving the Design of Existing Code by Martin Fowler. Duplicated Code, p76
Similar blocks of code found in 3 locations. Consider refactoring. Open
protected function _processes()
{
if (CommonFunctions::executeProgram('ps', 'aux', $bufr, PSI_DEBUG)) {
$lines = preg_split("/\n/", $bufr, -1, PREG_SPLIT_NO_EMPTY);
$processes['*'] = 0;
- Read upRead up
Duplicated Code
Duplicated code can lead to software that is hard to understand and difficult to change. The Don't Repeat Yourself (DRY) principle states:
Every piece of knowledge must have a single, unambiguous, authoritative representation within a system.
When you violate DRY, bugs and maintenance problems are sure to follow. Duplicated code has a tendency to both continue to replicate and also to diverge (leaving bugs as two similar implementations differ in subtle ways).
Tuning
This issue has a mass of 200.
We set useful threshold defaults for the languages we support but you may want to adjust these settings based on your project guidelines.
The threshold configuration represents the minimum mass a code block must have to be analyzed for duplication. The lower the threshold, the more fine-grained the comparison.
If the engine is too easily reporting duplication, try raising the threshold. If you suspect that the engine isn't catching enough duplication, try lowering the threshold. The best setting tends to differ from language to language.
See codeclimate-duplication
's documentation for more information about tuning the mass threshold in your .codeclimate.yml
.
Refactorings
- Extract Method
- Extract Class
- Form Template Method
- Introduce Null Object
- Pull Up Method
- Pull Up Field
- Substitute Algorithm
Further Reading
- Don't Repeat Yourself on the C2 Wiki
- Duplicated Code on SourceMaking
- Refactoring: Improving the Design of Existing Code by Martin Fowler. Duplicated Code, p76
Each class must be in a namespace of at least one level (a top-level vendor name) Open
class NetBSD extends BSDCommon
- Exclude checks
Avoid variables with short names like $a. Configured minimum length is 3. Open
$a = $this->grabkey('kern.boottime');
- Read upRead up
- Exclude checks
ShortVariable
Since: 0.2
Detects when a field, local, or parameter has a very short name.
Example
class Something {
private $q = 15; // VIOLATION - Field
public static function main( array $as ) { // VIOLATION - Formal
$r = 20 + $this->q; // VIOLATION - Local
for (int $i = 0; $i < 10; $i++) { // Not a Violation (inside FOR)
$r += $this->q;
}
}
}
Source https://phpmd.org/rules/naming.html#shortvariable
Method name "_processes" should not be prefixed with an underscore to indicate visibility Open
protected function _processes()
- Exclude checks
Method name "_distroicon" should not be prefixed with an underscore to indicate visibility Open
private function _distroicon()
- Exclude checks
Method name "_network" should not be prefixed with an underscore to indicate visibility Open
private function _network()
- Exclude checks
Method name "_uptime" should not be prefixed with an underscore to indicate visibility Open
private function _uptime()
- Exclude checks
Line exceeds 120 characters; contains 131 characters Open
} elseif (preg_match('/^\s+media:\s+/i', $buf2) && preg_match('/[\(\s](\d+)(G*)base/i', $buf2, $ar_buf2)) {
- Exclude checks
Line exceeds 120 characters; contains 132 characters Open
* @license http://opensource.org/licenses/gpl-2.0.php GNU General Public License version 2, or (at your option) any later version
- Exclude checks
Inline control structures are not allowed Open
if ($state == 'O') $state = 'R'; //linux format
- Exclude checks
Line exceeds 120 characters; contains 122 characters Open
CommonFunctions::executeProgram('netstat', '-nbdi | cut -c1-25,44- | grep "^[a-z]*[0-9][ \t].*Link"', $netstat_b);
- Exclude checks
Line exceeds 120 characters; contains 121 characters Open
CommonFunctions::executeProgram('netstat', '-ndi | cut -c1-25,44- | grep "^[a-z]*[0-9][ \t].*Link"', $netstat_n);
- Exclude checks
Inline control structures are not allowed Open
if (!defined('PSI_HIDE_NETWORK_MACADDR') || !PSI_HIDE_NETWORK_MACADDR) $dev->setInfo(($dev->getInfo()?$dev->getInfo().';':'').preg_replace('/:/', '-', strtoupper($ar_buf2[1])));
- Exclude checks
Line exceeds 120 characters; contains 205 characters Open
if (!defined('PSI_HIDE_NETWORK_MACADDR') || !PSI_HIDE_NETWORK_MACADDR) $dev->setInfo(($dev->getInfo()?$dev->getInfo().';':'').preg_replace('/:/', '-', strtoupper($ar_buf2[1])));
- Exclude checks
Inline control structures are not allowed Open
if ($speedinfo != "") $dev->setInfo(($dev->getInfo()?$dev->getInfo().';':'').$speedinfo);
- Exclude checks
Line exceeds 120 characters; contains 132 characters Open
* @license http://opensource.org/licenses/gpl-2.0.php GNU General Public License version 2, or (at your option) any later version
- Exclude checks
Line exceeds 120 characters; contains 181 characters Open
if (defined('PSI_SHOW_NETWORK_INFOS') && (PSI_SHOW_NETWORK_INFOS) && (CommonFunctions::executeProgram('ifconfig', $ar_buf_b[0].' 2>/dev/null', $bufr2, PSI_DEBUG))) {
- Exclude checks
Inline control structures are not allowed Open
else
- Exclude checks
Inline control structures are not allowed Open
if (preg_match('/\s(\S+)-duplex/i', $buf2, $ar_buf3))
- Exclude checks
Inline control structures are not allowed Open
elseif ($state == 'I') $state = 'S';
- Exclude checks
Expected 1 space after ELSE keyword; newline found Open
else
- Exclude checks
The variable $lines_b is not named in camelCase. Open
private function _network()
{
CommonFunctions::executeProgram('netstat', '-nbdi | cut -c1-25,44- | grep "^[a-z]*[0-9][ \t].*Link"', $netstat_b);
CommonFunctions::executeProgram('netstat', '-ndi | cut -c1-25,44- | grep "^[a-z]*[0-9][ \t].*Link"', $netstat_n);
$lines_b = preg_split("/\n/", $netstat_b, -1, PREG_SPLIT_NO_EMPTY);
- Read upRead up
- Exclude checks
CamelCaseVariableName
Since: 0.2
It is considered best practice to use the camelCase notation to name variables.
Example
class ClassName {
public function doSomething() {
$data_module = new DataModule();
}
}
Source
The variable $ar_buf3 is not named in camelCase. Open
private function _network()
{
CommonFunctions::executeProgram('netstat', '-nbdi | cut -c1-25,44- | grep "^[a-z]*[0-9][ \t].*Link"', $netstat_b);
CommonFunctions::executeProgram('netstat', '-ndi | cut -c1-25,44- | grep "^[a-z]*[0-9][ \t].*Link"', $netstat_n);
$lines_b = preg_split("/\n/", $netstat_b, -1, PREG_SPLIT_NO_EMPTY);
- Read upRead up
- Exclude checks
CamelCaseVariableName
Since: 0.2
It is considered best practice to use the camelCase notation to name variables.
Example
class ClassName {
public function doSomething() {
$data_module = new DataModule();
}
}
Source
The variable $ar_buf2 is not named in camelCase. Open
private function _network()
{
CommonFunctions::executeProgram('netstat', '-nbdi | cut -c1-25,44- | grep "^[a-z]*[0-9][ \t].*Link"', $netstat_b);
CommonFunctions::executeProgram('netstat', '-ndi | cut -c1-25,44- | grep "^[a-z]*[0-9][ \t].*Link"', $netstat_n);
$lines_b = preg_split("/\n/", $netstat_b, -1, PREG_SPLIT_NO_EMPTY);
- Read upRead up
- Exclude checks
CamelCaseVariableName
Since: 0.2
It is considered best practice to use the camelCase notation to name variables.
Example
class ClassName {
public function doSomething() {
$data_module = new DataModule();
}
}
Source
The variable $ar_buf is not named in camelCase. Open
protected function ide()
{
foreach ($this->readdmesg() as $line) {
if (preg_match('/^(.*) at (pciide|wdc|atabus|atapibus)[0-9]+ (.*): <(.*)>/', $line, $ar_buf)
|| preg_match('/^(.*) at (pciide|wdc|atabus|atapibus)[0-9]+ /', $line, $ar_buf)) {
- Read upRead up
- Exclude checks
CamelCaseVariableName
Since: 0.2
It is considered best practice to use the camelCase notation to name variables.
Example
class ClassName {
public function doSomething() {
$data_module = new DataModule();
}
}
Source
The variable $lines_n is not named in camelCase. Open
private function _network()
{
CommonFunctions::executeProgram('netstat', '-nbdi | cut -c1-25,44- | grep "^[a-z]*[0-9][ \t].*Link"', $netstat_b);
CommonFunctions::executeProgram('netstat', '-ndi | cut -c1-25,44- | grep "^[a-z]*[0-9][ \t].*Link"', $netstat_n);
$lines_b = preg_split("/\n/", $netstat_b, -1, PREG_SPLIT_NO_EMPTY);
- Read upRead up
- Exclude checks
CamelCaseVariableName
Since: 0.2
It is considered best practice to use the camelCase notation to name variables.
Example
class ClassName {
public function doSomething() {
$data_module = new DataModule();
}
}
Source
The variable $netstat_b is not named in camelCase. Open
private function _network()
{
CommonFunctions::executeProgram('netstat', '-nbdi | cut -c1-25,44- | grep "^[a-z]*[0-9][ \t].*Link"', $netstat_b);
CommonFunctions::executeProgram('netstat', '-ndi | cut -c1-25,44- | grep "^[a-z]*[0-9][ \t].*Link"', $netstat_n);
$lines_b = preg_split("/\n/", $netstat_b, -1, PREG_SPLIT_NO_EMPTY);
- Read upRead up
- Exclude checks
CamelCaseVariableName
Since: 0.2
It is considered best practice to use the camelCase notation to name variables.
Example
class ClassName {
public function doSomething() {
$data_module = new DataModule();
}
}
Source
The variable $ar_buf_n is not named in camelCase. Open
private function _network()
{
CommonFunctions::executeProgram('netstat', '-nbdi | cut -c1-25,44- | grep "^[a-z]*[0-9][ \t].*Link"', $netstat_b);
CommonFunctions::executeProgram('netstat', '-ndi | cut -c1-25,44- | grep "^[a-z]*[0-9][ \t].*Link"', $netstat_n);
$lines_b = preg_split("/\n/", $netstat_b, -1, PREG_SPLIT_NO_EMPTY);
- Read upRead up
- Exclude checks
CamelCaseVariableName
Since: 0.2
It is considered best practice to use the camelCase notation to name variables.
Example
class ClassName {
public function doSomething() {
$data_module = new DataModule();
}
}
Source
The variable $ar_buf is not named in camelCase. Open
protected function ide()
{
foreach ($this->readdmesg() as $line) {
if (preg_match('/^(.*) at (pciide|wdc|atabus|atapibus)[0-9]+ (.*): <(.*)>/', $line, $ar_buf)
|| preg_match('/^(.*) at (pciide|wdc|atabus|atapibus)[0-9]+ /', $line, $ar_buf)) {
- Read upRead up
- Exclude checks
CamelCaseVariableName
Since: 0.2
It is considered best practice to use the camelCase notation to name variables.
Example
class ClassName {
public function doSomething() {
$data_module = new DataModule();
}
}
Source
The variable $ar_buf is not named in camelCase. Open
protected function _processes()
{
if (CommonFunctions::executeProgram('ps', 'aux', $bufr, PSI_DEBUG)) {
$lines = preg_split("/\n/", $bufr, -1, PREG_SPLIT_NO_EMPTY);
$processes['*'] = 0;
- Read upRead up
- Exclude checks
CamelCaseVariableName
Since: 0.2
It is considered best practice to use the camelCase notation to name variables.
Example
class ClassName {
public function doSomething() {
$data_module = new DataModule();
}
}
Source
The variable $ar_buf2 is not named in camelCase. Open
private function _network()
{
CommonFunctions::executeProgram('netstat', '-nbdi | cut -c1-25,44- | grep "^[a-z]*[0-9][ \t].*Link"', $netstat_b);
CommonFunctions::executeProgram('netstat', '-ndi | cut -c1-25,44- | grep "^[a-z]*[0-9][ \t].*Link"', $netstat_n);
$lines_b = preg_split("/\n/", $netstat_b, -1, PREG_SPLIT_NO_EMPTY);
- Read upRead up
- Exclude checks
CamelCaseVariableName
Since: 0.2
It is considered best practice to use the camelCase notation to name variables.
Example
class ClassName {
public function doSomething() {
$data_module = new DataModule();
}
}
Source
The variable $ar_buf is not named in camelCase. Open
protected function ide()
{
foreach ($this->readdmesg() as $line) {
if (preg_match('/^(.*) at (pciide|wdc|atabus|atapibus)[0-9]+ (.*): <(.*)>/', $line, $ar_buf)
|| preg_match('/^(.*) at (pciide|wdc|atabus|atapibus)[0-9]+ /', $line, $ar_buf)) {
- Read upRead up
- Exclude checks
CamelCaseVariableName
Since: 0.2
It is considered best practice to use the camelCase notation to name variables.
Example
class ClassName {
public function doSomething() {
$data_module = new DataModule();
}
}
Source
The variable $ar_buf_b is not named in camelCase. Open
private function _network()
{
CommonFunctions::executeProgram('netstat', '-nbdi | cut -c1-25,44- | grep "^[a-z]*[0-9][ \t].*Link"', $netstat_b);
CommonFunctions::executeProgram('netstat', '-ndi | cut -c1-25,44- | grep "^[a-z]*[0-9][ \t].*Link"', $netstat_n);
$lines_b = preg_split("/\n/", $netstat_b, -1, PREG_SPLIT_NO_EMPTY);
- Read upRead up
- Exclude checks
CamelCaseVariableName
Since: 0.2
It is considered best practice to use the camelCase notation to name variables.
Example
class ClassName {
public function doSomething() {
$data_module = new DataModule();
}
}
Source
The variable $ar_buf_b is not named in camelCase. Open
private function _network()
{
CommonFunctions::executeProgram('netstat', '-nbdi | cut -c1-25,44- | grep "^[a-z]*[0-9][ \t].*Link"', $netstat_b);
CommonFunctions::executeProgram('netstat', '-ndi | cut -c1-25,44- | grep "^[a-z]*[0-9][ \t].*Link"', $netstat_n);
$lines_b = preg_split("/\n/", $netstat_b, -1, PREG_SPLIT_NO_EMPTY);
- Read upRead up
- Exclude checks
CamelCaseVariableName
Since: 0.2
It is considered best practice to use the camelCase notation to name variables.
Example
class ClassName {
public function doSomething() {
$data_module = new DataModule();
}
}
Source
The variable $netstat_n is not named in camelCase. Open
private function _network()
{
CommonFunctions::executeProgram('netstat', '-nbdi | cut -c1-25,44- | grep "^[a-z]*[0-9][ \t].*Link"', $netstat_b);
CommonFunctions::executeProgram('netstat', '-ndi | cut -c1-25,44- | grep "^[a-z]*[0-9][ \t].*Link"', $netstat_n);
$lines_b = preg_split("/\n/", $netstat_b, -1, PREG_SPLIT_NO_EMPTY);
- Read upRead up
- Exclude checks
CamelCaseVariableName
Since: 0.2
It is considered best practice to use the camelCase notation to name variables.
Example
class ClassName {
public function doSomething() {
$data_module = new DataModule();
}
}
Source
The variable $lines_n is not named in camelCase. Open
private function _network()
{
CommonFunctions::executeProgram('netstat', '-nbdi | cut -c1-25,44- | grep "^[a-z]*[0-9][ \t].*Link"', $netstat_b);
CommonFunctions::executeProgram('netstat', '-ndi | cut -c1-25,44- | grep "^[a-z]*[0-9][ \t].*Link"', $netstat_n);
$lines_b = preg_split("/\n/", $netstat_b, -1, PREG_SPLIT_NO_EMPTY);
- Read upRead up
- Exclude checks
CamelCaseVariableName
Since: 0.2
It is considered best practice to use the camelCase notation to name variables.
Example
class ClassName {
public function doSomething() {
$data_module = new DataModule();
}
}
Source
The variable $ar_buf_b is not named in camelCase. Open
private function _network()
{
CommonFunctions::executeProgram('netstat', '-nbdi | cut -c1-25,44- | grep "^[a-z]*[0-9][ \t].*Link"', $netstat_b);
CommonFunctions::executeProgram('netstat', '-ndi | cut -c1-25,44- | grep "^[a-z]*[0-9][ \t].*Link"', $netstat_n);
$lines_b = preg_split("/\n/", $netstat_b, -1, PREG_SPLIT_NO_EMPTY);
- Read upRead up
- Exclude checks
CamelCaseVariableName
Since: 0.2
It is considered best practice to use the camelCase notation to name variables.
Example
class ClassName {
public function doSomething() {
$data_module = new DataModule();
}
}
Source
The variable $lines_b is not named in camelCase. Open
private function _network()
{
CommonFunctions::executeProgram('netstat', '-nbdi | cut -c1-25,44- | grep "^[a-z]*[0-9][ \t].*Link"', $netstat_b);
CommonFunctions::executeProgram('netstat', '-ndi | cut -c1-25,44- | grep "^[a-z]*[0-9][ \t].*Link"', $netstat_n);
$lines_b = preg_split("/\n/", $netstat_b, -1, PREG_SPLIT_NO_EMPTY);
- Read upRead up
- Exclude checks
CamelCaseVariableName
Since: 0.2
It is considered best practice to use the camelCase notation to name variables.
Example
class ClassName {
public function doSomething() {
$data_module = new DataModule();
}
}
Source
The variable $ar_buf_n is not named in camelCase. Open
private function _network()
{
CommonFunctions::executeProgram('netstat', '-nbdi | cut -c1-25,44- | grep "^[a-z]*[0-9][ \t].*Link"', $netstat_b);
CommonFunctions::executeProgram('netstat', '-ndi | cut -c1-25,44- | grep "^[a-z]*[0-9][ \t].*Link"', $netstat_n);
$lines_b = preg_split("/\n/", $netstat_b, -1, PREG_SPLIT_NO_EMPTY);
- Read upRead up
- Exclude checks
CamelCaseVariableName
Since: 0.2
It is considered best practice to use the camelCase notation to name variables.
Example
class ClassName {
public function doSomething() {
$data_module = new DataModule();
}
}
Source
The variable $ar_buf2 is not named in camelCase. Open
private function _network()
{
CommonFunctions::executeProgram('netstat', '-nbdi | cut -c1-25,44- | grep "^[a-z]*[0-9][ \t].*Link"', $netstat_b);
CommonFunctions::executeProgram('netstat', '-ndi | cut -c1-25,44- | grep "^[a-z]*[0-9][ \t].*Link"', $netstat_n);
$lines_b = preg_split("/\n/", $netstat_b, -1, PREG_SPLIT_NO_EMPTY);
- Read upRead up
- Exclude checks
CamelCaseVariableName
Since: 0.2
It is considered best practice to use the camelCase notation to name variables.
Example
class ClassName {
public function doSomething() {
$data_module = new DataModule();
}
}
Source
The variable $ar_buf is not named in camelCase. Open
protected function ide()
{
foreach ($this->readdmesg() as $line) {
if (preg_match('/^(.*) at (pciide|wdc|atabus|atapibus)[0-9]+ (.*): <(.*)>/', $line, $ar_buf)
|| preg_match('/^(.*) at (pciide|wdc|atabus|atapibus)[0-9]+ /', $line, $ar_buf)) {
- Read upRead up
- Exclude checks
CamelCaseVariableName
Since: 0.2
It is considered best practice to use the camelCase notation to name variables.
Example
class ClassName {
public function doSomething() {
$data_module = new DataModule();
}
}
Source
The variable $ar_buf_n is not named in camelCase. Open
protected function ide()
{
foreach ($this->readdmesg() as $line) {
if (preg_match('/^(.*) at (pciide|wdc|atabus|atapibus)[0-9]+ (.*): <(.*)>/', $line, $ar_buf)
|| preg_match('/^(.*) at (pciide|wdc|atabus|atapibus)[0-9]+ /', $line, $ar_buf)) {
- Read upRead up
- Exclude checks
CamelCaseVariableName
Since: 0.2
It is considered best practice to use the camelCase notation to name variables.
Example
class ClassName {
public function doSomething() {
$data_module = new DataModule();
}
}
Source
The variable $lines_b is not named in camelCase. Open
private function _network()
{
CommonFunctions::executeProgram('netstat', '-nbdi | cut -c1-25,44- | grep "^[a-z]*[0-9][ \t].*Link"', $netstat_b);
CommonFunctions::executeProgram('netstat', '-ndi | cut -c1-25,44- | grep "^[a-z]*[0-9][ \t].*Link"', $netstat_n);
$lines_b = preg_split("/\n/", $netstat_b, -1, PREG_SPLIT_NO_EMPTY);
- Read upRead up
- Exclude checks
CamelCaseVariableName
Since: 0.2
It is considered best practice to use the camelCase notation to name variables.
Example
class ClassName {
public function doSomething() {
$data_module = new DataModule();
}
}
Source
The variable $ar_buf_b is not named in camelCase. Open
private function _network()
{
CommonFunctions::executeProgram('netstat', '-nbdi | cut -c1-25,44- | grep "^[a-z]*[0-9][ \t].*Link"', $netstat_b);
CommonFunctions::executeProgram('netstat', '-ndi | cut -c1-25,44- | grep "^[a-z]*[0-9][ \t].*Link"', $netstat_n);
$lines_b = preg_split("/\n/", $netstat_b, -1, PREG_SPLIT_NO_EMPTY);
- Read upRead up
- Exclude checks
CamelCaseVariableName
Since: 0.2
It is considered best practice to use the camelCase notation to name variables.
Example
class ClassName {
public function doSomething() {
$data_module = new DataModule();
}
}
Source
The variable $ar_buf is not named in camelCase. Open
protected function ide()
{
foreach ($this->readdmesg() as $line) {
if (preg_match('/^(.*) at (pciide|wdc|atabus|atapibus)[0-9]+ (.*): <(.*)>/', $line, $ar_buf)
|| preg_match('/^(.*) at (pciide|wdc|atabus|atapibus)[0-9]+ /', $line, $ar_buf)) {
- Read upRead up
- Exclude checks
CamelCaseVariableName
Since: 0.2
It is considered best practice to use the camelCase notation to name variables.
Example
class ClassName {
public function doSomething() {
$data_module = new DataModule();
}
}
Source
The variable $ar_buf_n is not named in camelCase. Open
protected function ide()
{
foreach ($this->readdmesg() as $line) {
if (preg_match('/^(.*) at (pciide|wdc|atabus|atapibus)[0-9]+ (.*): <(.*)>/', $line, $ar_buf)
|| preg_match('/^(.*) at (pciide|wdc|atabus|atapibus)[0-9]+ /', $line, $ar_buf)) {
- Read upRead up
- Exclude checks
CamelCaseVariableName
Since: 0.2
It is considered best practice to use the camelCase notation to name variables.
Example
class ClassName {
public function doSomething() {
$data_module = new DataModule();
}
}
Source
The variable $ar_buf_n is not named in camelCase. Open
private function _network()
{
CommonFunctions::executeProgram('netstat', '-nbdi | cut -c1-25,44- | grep "^[a-z]*[0-9][ \t].*Link"', $netstat_b);
CommonFunctions::executeProgram('netstat', '-ndi | cut -c1-25,44- | grep "^[a-z]*[0-9][ \t].*Link"', $netstat_n);
$lines_b = preg_split("/\n/", $netstat_b, -1, PREG_SPLIT_NO_EMPTY);
- Read upRead up
- Exclude checks
CamelCaseVariableName
Since: 0.2
It is considered best practice to use the camelCase notation to name variables.
Example
class ClassName {
public function doSomething() {
$data_module = new DataModule();
}
}
Source
The variable $ar_buf2 is not named in camelCase. Open
private function _network()
{
CommonFunctions::executeProgram('netstat', '-nbdi | cut -c1-25,44- | grep "^[a-z]*[0-9][ \t].*Link"', $netstat_b);
CommonFunctions::executeProgram('netstat', '-ndi | cut -c1-25,44- | grep "^[a-z]*[0-9][ \t].*Link"', $netstat_n);
$lines_b = preg_split("/\n/", $netstat_b, -1, PREG_SPLIT_NO_EMPTY);
- Read upRead up
- Exclude checks
CamelCaseVariableName
Since: 0.2
It is considered best practice to use the camelCase notation to name variables.
Example
class ClassName {
public function doSomething() {
$data_module = new DataModule();
}
}
Source
The variable $ar_buf2 is not named in camelCase. Open
private function _network()
{
CommonFunctions::executeProgram('netstat', '-nbdi | cut -c1-25,44- | grep "^[a-z]*[0-9][ \t].*Link"', $netstat_b);
CommonFunctions::executeProgram('netstat', '-ndi | cut -c1-25,44- | grep "^[a-z]*[0-9][ \t].*Link"', $netstat_n);
$lines_b = preg_split("/\n/", $netstat_b, -1, PREG_SPLIT_NO_EMPTY);
- Read upRead up
- Exclude checks
CamelCaseVariableName
Since: 0.2
It is considered best practice to use the camelCase notation to name variables.
Example
class ClassName {
public function doSomething() {
$data_module = new DataModule();
}
}
Source
The variable $ar_buf is not named in camelCase. Open
protected function ide()
{
foreach ($this->readdmesg() as $line) {
if (preg_match('/^(.*) at (pciide|wdc|atabus|atapibus)[0-9]+ (.*): <(.*)>/', $line, $ar_buf)
|| preg_match('/^(.*) at (pciide|wdc|atabus|atapibus)[0-9]+ /', $line, $ar_buf)) {
- Read upRead up
- Exclude checks
CamelCaseVariableName
Since: 0.2
It is considered best practice to use the camelCase notation to name variables.
Example
class ClassName {
public function doSomething() {
$data_module = new DataModule();
}
}
Source
The variable $ar_buf_n is not named in camelCase. Open
protected function ide()
{
foreach ($this->readdmesg() as $line) {
if (preg_match('/^(.*) at (pciide|wdc|atabus|atapibus)[0-9]+ (.*): <(.*)>/', $line, $ar_buf)
|| preg_match('/^(.*) at (pciide|wdc|atabus|atapibus)[0-9]+ /', $line, $ar_buf)) {
- Read upRead up
- Exclude checks
CamelCaseVariableName
Since: 0.2
It is considered best practice to use the camelCase notation to name variables.
Example
class ClassName {
public function doSomething() {
$data_module = new DataModule();
}
}
Source
The variable $ar_buf_n is not named in camelCase. Open
protected function ide()
{
foreach ($this->readdmesg() as $line) {
if (preg_match('/^(.*) at (pciide|wdc|atabus|atapibus)[0-9]+ (.*): <(.*)>/', $line, $ar_buf)
|| preg_match('/^(.*) at (pciide|wdc|atabus|atapibus)[0-9]+ /', $line, $ar_buf)) {
- Read upRead up
- Exclude checks
CamelCaseVariableName
Since: 0.2
It is considered best practice to use the camelCase notation to name variables.
Example
class ClassName {
public function doSomething() {
$data_module = new DataModule();
}
}
Source
The variable $netstat_b is not named in camelCase. Open
private function _network()
{
CommonFunctions::executeProgram('netstat', '-nbdi | cut -c1-25,44- | grep "^[a-z]*[0-9][ \t].*Link"', $netstat_b);
CommonFunctions::executeProgram('netstat', '-ndi | cut -c1-25,44- | grep "^[a-z]*[0-9][ \t].*Link"', $netstat_n);
$lines_b = preg_split("/\n/", $netstat_b, -1, PREG_SPLIT_NO_EMPTY);
- Read upRead up
- Exclude checks
CamelCaseVariableName
Since: 0.2
It is considered best practice to use the camelCase notation to name variables.
Example
class ClassName {
public function doSomething() {
$data_module = new DataModule();
}
}
Source
The variable $ar_buf2 is not named in camelCase. Open
private function _network()
{
CommonFunctions::executeProgram('netstat', '-nbdi | cut -c1-25,44- | grep "^[a-z]*[0-9][ \t].*Link"', $netstat_b);
CommonFunctions::executeProgram('netstat', '-ndi | cut -c1-25,44- | grep "^[a-z]*[0-9][ \t].*Link"', $netstat_n);
$lines_b = preg_split("/\n/", $netstat_b, -1, PREG_SPLIT_NO_EMPTY);
- Read upRead up
- Exclude checks
CamelCaseVariableName
Since: 0.2
It is considered best practice to use the camelCase notation to name variables.
Example
class ClassName {
public function doSomething() {
$data_module = new DataModule();
}
}
Source
The variable $ar_buf2 is not named in camelCase. Open
private function _network()
{
CommonFunctions::executeProgram('netstat', '-nbdi | cut -c1-25,44- | grep "^[a-z]*[0-9][ \t].*Link"', $netstat_b);
CommonFunctions::executeProgram('netstat', '-ndi | cut -c1-25,44- | grep "^[a-z]*[0-9][ \t].*Link"', $netstat_n);
$lines_b = preg_split("/\n/", $netstat_b, -1, PREG_SPLIT_NO_EMPTY);
- Read upRead up
- Exclude checks
CamelCaseVariableName
Since: 0.2
It is considered best practice to use the camelCase notation to name variables.
Example
class ClassName {
public function doSomething() {
$data_module = new DataModule();
}
}
Source
The variable $ar_buf_n is not named in camelCase. Open
private function _network()
{
CommonFunctions::executeProgram('netstat', '-nbdi | cut -c1-25,44- | grep "^[a-z]*[0-9][ \t].*Link"', $netstat_b);
CommonFunctions::executeProgram('netstat', '-ndi | cut -c1-25,44- | grep "^[a-z]*[0-9][ \t].*Link"', $netstat_n);
$lines_b = preg_split("/\n/", $netstat_b, -1, PREG_SPLIT_NO_EMPTY);
- Read upRead up
- Exclude checks
CamelCaseVariableName
Since: 0.2
It is considered best practice to use the camelCase notation to name variables.
Example
class ClassName {
public function doSomething() {
$data_module = new DataModule();
}
}
Source
The variable $ar_buf2 is not named in camelCase. Open
private function _network()
{
CommonFunctions::executeProgram('netstat', '-nbdi | cut -c1-25,44- | grep "^[a-z]*[0-9][ \t].*Link"', $netstat_b);
CommonFunctions::executeProgram('netstat', '-ndi | cut -c1-25,44- | grep "^[a-z]*[0-9][ \t].*Link"', $netstat_n);
$lines_b = preg_split("/\n/", $netstat_b, -1, PREG_SPLIT_NO_EMPTY);
- Read upRead up
- Exclude checks
CamelCaseVariableName
Since: 0.2
It is considered best practice to use the camelCase notation to name variables.
Example
class ClassName {
public function doSomething() {
$data_module = new DataModule();
}
}
Source
The variable $ar_buf2 is not named in camelCase. Open
private function _network()
{
CommonFunctions::executeProgram('netstat', '-nbdi | cut -c1-25,44- | grep "^[a-z]*[0-9][ \t].*Link"', $netstat_b);
CommonFunctions::executeProgram('netstat', '-ndi | cut -c1-25,44- | grep "^[a-z]*[0-9][ \t].*Link"', $netstat_n);
$lines_b = preg_split("/\n/", $netstat_b, -1, PREG_SPLIT_NO_EMPTY);
- Read upRead up
- Exclude checks
CamelCaseVariableName
Since: 0.2
It is considered best practice to use the camelCase notation to name variables.
Example
class ClassName {
public function doSomething() {
$data_module = new DataModule();
}
}
Source
The variable $ar_buf2 is not named in camelCase. Open
private function _network()
{
CommonFunctions::executeProgram('netstat', '-nbdi | cut -c1-25,44- | grep "^[a-z]*[0-9][ \t].*Link"', $netstat_b);
CommonFunctions::executeProgram('netstat', '-ndi | cut -c1-25,44- | grep "^[a-z]*[0-9][ \t].*Link"', $netstat_n);
$lines_b = preg_split("/\n/", $netstat_b, -1, PREG_SPLIT_NO_EMPTY);
- Read upRead up
- Exclude checks
CamelCaseVariableName
Since: 0.2
It is considered best practice to use the camelCase notation to name variables.
Example
class ClassName {
public function doSomething() {
$data_module = new DataModule();
}
}
Source
The variable $ar_buf_n is not named in camelCase. Open
protected function ide()
{
foreach ($this->readdmesg() as $line) {
if (preg_match('/^(.*) at (pciide|wdc|atabus|atapibus)[0-9]+ (.*): <(.*)>/', $line, $ar_buf)
|| preg_match('/^(.*) at (pciide|wdc|atabus|atapibus)[0-9]+ /', $line, $ar_buf)) {
- Read upRead up
- Exclude checks
CamelCaseVariableName
Since: 0.2
It is considered best practice to use the camelCase notation to name variables.
Example
class ClassName {
public function doSomething() {
$data_module = new DataModule();
}
}
Source
The variable $netstat_n is not named in camelCase. Open
private function _network()
{
CommonFunctions::executeProgram('netstat', '-nbdi | cut -c1-25,44- | grep "^[a-z]*[0-9][ \t].*Link"', $netstat_b);
CommonFunctions::executeProgram('netstat', '-ndi | cut -c1-25,44- | grep "^[a-z]*[0-9][ \t].*Link"', $netstat_n);
$lines_b = preg_split("/\n/", $netstat_b, -1, PREG_SPLIT_NO_EMPTY);
- Read upRead up
- Exclude checks
CamelCaseVariableName
Since: 0.2
It is considered best practice to use the camelCase notation to name variables.
Example
class ClassName {
public function doSomething() {
$data_module = new DataModule();
}
}
Source
The variable $ar_buf2 is not named in camelCase. Open
private function _network()
{
CommonFunctions::executeProgram('netstat', '-nbdi | cut -c1-25,44- | grep "^[a-z]*[0-9][ \t].*Link"', $netstat_b);
CommonFunctions::executeProgram('netstat', '-ndi | cut -c1-25,44- | grep "^[a-z]*[0-9][ \t].*Link"', $netstat_n);
$lines_b = preg_split("/\n/", $netstat_b, -1, PREG_SPLIT_NO_EMPTY);
- Read upRead up
- Exclude checks
CamelCaseVariableName
Since: 0.2
It is considered best practice to use the camelCase notation to name variables.
Example
class ClassName {
public function doSomething() {
$data_module = new DataModule();
}
}
Source
The variable $ar_buf2 is not named in camelCase. Open
private function _network()
{
CommonFunctions::executeProgram('netstat', '-nbdi | cut -c1-25,44- | grep "^[a-z]*[0-9][ \t].*Link"', $netstat_b);
CommonFunctions::executeProgram('netstat', '-ndi | cut -c1-25,44- | grep "^[a-z]*[0-9][ \t].*Link"', $netstat_n);
$lines_b = preg_split("/\n/", $netstat_b, -1, PREG_SPLIT_NO_EMPTY);
- Read upRead up
- Exclude checks
CamelCaseVariableName
Since: 0.2
It is considered best practice to use the camelCase notation to name variables.
Example
class ClassName {
public function doSomething() {
$data_module = new DataModule();
}
}
Source
The variable $ar_buf is not named in camelCase. Open
protected function ide()
{
foreach ($this->readdmesg() as $line) {
if (preg_match('/^(.*) at (pciide|wdc|atabus|atapibus)[0-9]+ (.*): <(.*)>/', $line, $ar_buf)
|| preg_match('/^(.*) at (pciide|wdc|atabus|atapibus)[0-9]+ /', $line, $ar_buf)) {
- Read upRead up
- Exclude checks
CamelCaseVariableName
Since: 0.2
It is considered best practice to use the camelCase notation to name variables.
Example
class ClassName {
public function doSomething() {
$data_module = new DataModule();
}
}
Source
The variable $ar_buf_n is not named in camelCase. Open
protected function ide()
{
foreach ($this->readdmesg() as $line) {
if (preg_match('/^(.*) at (pciide|wdc|atabus|atapibus)[0-9]+ (.*): <(.*)>/', $line, $ar_buf)
|| preg_match('/^(.*) at (pciide|wdc|atabus|atapibus)[0-9]+ /', $line, $ar_buf)) {
- Read upRead up
- Exclude checks
CamelCaseVariableName
Since: 0.2
It is considered best practice to use the camelCase notation to name variables.
Example
class ClassName {
public function doSomething() {
$data_module = new DataModule();
}
}
Source
The variable $ar_buf is not named in camelCase. Open
protected function ide()
{
foreach ($this->readdmesg() as $line) {
if (preg_match('/^(.*) at (pciide|wdc|atabus|atapibus)[0-9]+ (.*): <(.*)>/', $line, $ar_buf)
|| preg_match('/^(.*) at (pciide|wdc|atabus|atapibus)[0-9]+ /', $line, $ar_buf)) {
- Read upRead up
- Exclude checks
CamelCaseVariableName
Since: 0.2
It is considered best practice to use the camelCase notation to name variables.
Example
class ClassName {
public function doSomething() {
$data_module = new DataModule();
}
}
Source
The variable $ar_buf is not named in camelCase. Open
protected function _processes()
{
if (CommonFunctions::executeProgram('ps', 'aux', $bufr, PSI_DEBUG)) {
$lines = preg_split("/\n/", $bufr, -1, PREG_SPLIT_NO_EMPTY);
$processes['*'] = 0;
- Read upRead up
- Exclude checks
CamelCaseVariableName
Since: 0.2
It is considered best practice to use the camelCase notation to name variables.
Example
class ClassName {
public function doSomething() {
$data_module = new DataModule();
}
}
Source
The variable $ar_buf_n is not named in camelCase. Open
private function _network()
{
CommonFunctions::executeProgram('netstat', '-nbdi | cut -c1-25,44- | grep "^[a-z]*[0-9][ \t].*Link"', $netstat_b);
CommonFunctions::executeProgram('netstat', '-ndi | cut -c1-25,44- | grep "^[a-z]*[0-9][ \t].*Link"', $netstat_n);
$lines_b = preg_split("/\n/", $netstat_b, -1, PREG_SPLIT_NO_EMPTY);
- Read upRead up
- Exclude checks
CamelCaseVariableName
Since: 0.2
It is considered best practice to use the camelCase notation to name variables.
Example
class ClassName {
public function doSomething() {
$data_module = new DataModule();
}
}
Source
The variable $ar_buf_n is not named in camelCase. Open
private function _network()
{
CommonFunctions::executeProgram('netstat', '-nbdi | cut -c1-25,44- | grep "^[a-z]*[0-9][ \t].*Link"', $netstat_b);
CommonFunctions::executeProgram('netstat', '-ndi | cut -c1-25,44- | grep "^[a-z]*[0-9][ \t].*Link"', $netstat_n);
$lines_b = preg_split("/\n/", $netstat_b, -1, PREG_SPLIT_NO_EMPTY);
- Read upRead up
- Exclude checks
CamelCaseVariableName
Since: 0.2
It is considered best practice to use the camelCase notation to name variables.
Example
class ClassName {
public function doSomething() {
$data_module = new DataModule();
}
}
Source
The variable $ar_buf2 is not named in camelCase. Open
private function _network()
{
CommonFunctions::executeProgram('netstat', '-nbdi | cut -c1-25,44- | grep "^[a-z]*[0-9][ \t].*Link"', $netstat_b);
CommonFunctions::executeProgram('netstat', '-ndi | cut -c1-25,44- | grep "^[a-z]*[0-9][ \t].*Link"', $netstat_n);
$lines_b = preg_split("/\n/", $netstat_b, -1, PREG_SPLIT_NO_EMPTY);
- Read upRead up
- Exclude checks
CamelCaseVariableName
Since: 0.2
It is considered best practice to use the camelCase notation to name variables.
Example
class ClassName {
public function doSomething() {
$data_module = new DataModule();
}
}
Source
The variable $ar_buf3 is not named in camelCase. Open
private function _network()
{
CommonFunctions::executeProgram('netstat', '-nbdi | cut -c1-25,44- | grep "^[a-z]*[0-9][ \t].*Link"', $netstat_b);
CommonFunctions::executeProgram('netstat', '-ndi | cut -c1-25,44- | grep "^[a-z]*[0-9][ \t].*Link"', $netstat_n);
$lines_b = preg_split("/\n/", $netstat_b, -1, PREG_SPLIT_NO_EMPTY);
- Read upRead up
- Exclude checks
CamelCaseVariableName
Since: 0.2
It is considered best practice to use the camelCase notation to name variables.
Example
class ClassName {
public function doSomething() {
$data_module = new DataModule();
}
}
Source
The variable $ar_buf2 is not named in camelCase. Open
private function _network()
{
CommonFunctions::executeProgram('netstat', '-nbdi | cut -c1-25,44- | grep "^[a-z]*[0-9][ \t].*Link"', $netstat_b);
CommonFunctions::executeProgram('netstat', '-ndi | cut -c1-25,44- | grep "^[a-z]*[0-9][ \t].*Link"', $netstat_n);
$lines_b = preg_split("/\n/", $netstat_b, -1, PREG_SPLIT_NO_EMPTY);
- Read upRead up
- Exclude checks
CamelCaseVariableName
Since: 0.2
It is considered best practice to use the camelCase notation to name variables.
Example
class ClassName {
public function doSomething() {
$data_module = new DataModule();
}
}
Source
The variable $ar_buf is not named in camelCase. Open
protected function ide()
{
foreach ($this->readdmesg() as $line) {
if (preg_match('/^(.*) at (pciide|wdc|atabus|atapibus)[0-9]+ (.*): <(.*)>/', $line, $ar_buf)
|| preg_match('/^(.*) at (pciide|wdc|atabus|atapibus)[0-9]+ /', $line, $ar_buf)) {
- Read upRead up
- Exclude checks
CamelCaseVariableName
Since: 0.2
It is considered best practice to use the camelCase notation to name variables.
Example
class ClassName {
public function doSomething() {
$data_module = new DataModule();
}
}
Source
The variable $ar_buf_b is not named in camelCase. Open
private function _network()
{
CommonFunctions::executeProgram('netstat', '-nbdi | cut -c1-25,44- | grep "^[a-z]*[0-9][ \t].*Link"', $netstat_b);
CommonFunctions::executeProgram('netstat', '-ndi | cut -c1-25,44- | grep "^[a-z]*[0-9][ \t].*Link"', $netstat_n);
$lines_b = preg_split("/\n/", $netstat_b, -1, PREG_SPLIT_NO_EMPTY);
- Read upRead up
- Exclude checks
CamelCaseVariableName
Since: 0.2
It is considered best practice to use the camelCase notation to name variables.
Example
class ClassName {
public function doSomething() {
$data_module = new DataModule();
}
}
Source
The variable $ar_buf_b is not named in camelCase. Open
private function _network()
{
CommonFunctions::executeProgram('netstat', '-nbdi | cut -c1-25,44- | grep "^[a-z]*[0-9][ \t].*Link"', $netstat_b);
CommonFunctions::executeProgram('netstat', '-ndi | cut -c1-25,44- | grep "^[a-z]*[0-9][ \t].*Link"', $netstat_n);
$lines_b = preg_split("/\n/", $netstat_b, -1, PREG_SPLIT_NO_EMPTY);
- Read upRead up
- Exclude checks
CamelCaseVariableName
Since: 0.2
It is considered best practice to use the camelCase notation to name variables.
Example
class ClassName {
public function doSomething() {
$data_module = new DataModule();
}
}
Source
The variable $ar_buf_n is not named in camelCase. Open
protected function ide()
{
foreach ($this->readdmesg() as $line) {
if (preg_match('/^(.*) at (pciide|wdc|atabus|atapibus)[0-9]+ (.*): <(.*)>/', $line, $ar_buf)
|| preg_match('/^(.*) at (pciide|wdc|atabus|atapibus)[0-9]+ /', $line, $ar_buf)) {
- Read upRead up
- Exclude checks
CamelCaseVariableName
Since: 0.2
It is considered best practice to use the camelCase notation to name variables.
Example
class ClassName {
public function doSomething() {
$data_module = new DataModule();
}
}
Source
The variable $ar_buf_n is not named in camelCase. Open
protected function ide()
{
foreach ($this->readdmesg() as $line) {
if (preg_match('/^(.*) at (pciide|wdc|atabus|atapibus)[0-9]+ (.*): <(.*)>/', $line, $ar_buf)
|| preg_match('/^(.*) at (pciide|wdc|atabus|atapibus)[0-9]+ /', $line, $ar_buf)) {
- Read upRead up
- Exclude checks
CamelCaseVariableName
Since: 0.2
It is considered best practice to use the camelCase notation to name variables.
Example
class ClassName {
public function doSomething() {
$data_module = new DataModule();
}
}
Source
The method _uptime is not named in camelCase. Open
private function _uptime()
{
$a = $this->grabkey('kern.boottime');
$this->sys->setUptime(time() - $a);
}
- Read upRead up
- Exclude checks
CamelCaseMethodName
Since: 0.2
It is considered best practice to use the camelCase notation to name methods.
Example
class ClassName {
public function get_name() {
}
}
Source
The method _processes is not named in camelCase. Open
protected function _processes()
{
if (CommonFunctions::executeProgram('ps', 'aux', $bufr, PSI_DEBUG)) {
$lines = preg_split("/\n/", $bufr, -1, PREG_SPLIT_NO_EMPTY);
$processes['*'] = 0;
- Read upRead up
- Exclude checks
CamelCaseMethodName
Since: 0.2
It is considered best practice to use the camelCase notation to name methods.
Example
class ClassName {
public function get_name() {
}
}
Source
The method _distroicon is not named in camelCase. Open
private function _distroicon()
{
$this->sys->setDistributionIcon('NetBSD.png');
}
- Read upRead up
- Exclude checks
CamelCaseMethodName
Since: 0.2
It is considered best practice to use the camelCase notation to name methods.
Example
class ClassName {
public function get_name() {
}
}
Source
The method _network is not named in camelCase. Open
private function _network()
{
CommonFunctions::executeProgram('netstat', '-nbdi | cut -c1-25,44- | grep "^[a-z]*[0-9][ \t].*Link"', $netstat_b);
CommonFunctions::executeProgram('netstat', '-ndi | cut -c1-25,44- | grep "^[a-z]*[0-9][ \t].*Link"', $netstat_n);
$lines_b = preg_split("/\n/", $netstat_b, -1, PREG_SPLIT_NO_EMPTY);
- Read upRead up
- Exclude checks
CamelCaseMethodName
Since: 0.2
It is considered best practice to use the camelCase notation to name methods.
Example
class ClassName {
public function get_name() {
}
}