README.md
# ChinaAqi
[![Gem Version](https://badge.fury.io/rb/china_aqi.png)](http://badge.fury.io/rb/china_aqi)
[![Build Status](https://travis-ci.org/Xuhao/china_aqi.png?branch=master)](https://travis-ci.org/Xuhao/china_aqi)
[![Code Climate](https://codeclimate.com/github/Xuhao/china_aqi.png)](https://codeclimate.com/github/Xuhao/china_aqi)
[![Dependency Status](https://gemnasium.com/Xuhao/china_aqi.png)](https://gemnasium.com/Xuhao/china_aqi)
[![Coverage Status](https://coveralls.io/repos/Xuhao/china_aqi/badge.png?branch=master)](https://coveralls.io/r/Xuhao/china_aqi?branch=master)
China Air Quality Index API for Ruby. Thanks [pm25.in][pm25_in] for providing all the AQI data to us for free. All the data is form China's official sector. It's a reall gread work! ChinaAqi gem provides some interface based on Ruby On Rails. Before using it, you need to ask for a token form [pm25.in][pm25_in_api].
AQI data from all monitoring stations in the majority of cities are available:
- **CO**: 一氧化碳
- **NO2**: 二氧化氮
- **O3**: 臭氧
- **PM10**: 颗粒物(粒径小于等于10μm)
- **PM2.5**: 颗粒物(粒径小于等于2.5μm)
- **SO2**: 二氧化硫
### Chinese PM2.5 reporting from U.S. Consulate
About PM2.5 reporting from U.S. Consulate please check out: [pm25
](https://github.com/ekohe/pm25)
## Compatibility
MRI(aka CRuby) 2.0 or greater, 2.2+ recommended, JRuby not sure.
**For MRI 1.9, please use [v0.0.5](https://github.com/Xuhao/china_aqi/tree/v0.0.5).**
Support for Rails:
* Rails 3 (not sure)
* Rails 4 (tested)
* Rails 5 (tested)
## Installation
Add this line to your application's Gemfile:
gem 'china_aqi'
And then execute:
$ bundle
Or install it yourself as:
$ gem install china_aqi
### For Rails app
Run install generator:
$ rails generate china_aqi:install
It will add a new line in config/application.rb:
```ruby
config.china_aqi_token = 'you_token_here'
```
Put your token there.
### For non-Rails app
Just require `china_aqi` and then assign a valid token for it:
```ruby
require 'rubygems'
require 'china_aqi'
ChinaAqi.token = 'you_token_here'
```
## Usage
As we mentioned at the beginning, we must get a token form [pm25.in][pm25_in_api] before using this API. It's free!
### Parameters
Most APIs accept three parameters:
- `city`: city name can be chinese characters, pinyin or area code('上海' or 'shanghai' or '021')
- `avg`: true/false, optional, if true, return average for all monitoring stations, default is true.
- `stations`: yes/no, optional, if yes, return data for all monitoring stations; if no, just return average without stations data, default is yes.
`avg` and `stations` params is optional, it will use defaut value if not set them.
### Examples
##### CO: 一氧化碳
```ruby
shanghai = ChinaAqi::CO.new('上海', avg: true, stations: :yes) # same as ChinaAqi::CO.new('上海')
# => #<ChinaAqi::CO:0x007fbf9d953238 @city="021", @parmas={:avg=>true ...
shanghai.get
# => [{"aqi"=>57, "area"=>"上海", "co"=>0.0, "co_24h"=>0.0, "position_name"=>"普陀", "primary_pollutant" ...
ChinaAqi::CO.get('上海', avg: true, stations: :yes) # => Same as above
```
##### NO2: 二氧化氮
```ruby
ChinaAqi::NO2.new('021').get # or ChinaAqi::NO2.get('021')
# => [{"aqi"=>57, "area"=>"上海", "no2"=>0, "no2_24h"=>0, "position_name"=>"普陀", "primary_pollutant" ...
```
##### O3: 臭氧
```ruby
ChinaAqi::O3.new('shanghai').get # or ChinaAqi::O3.get('shanghai')
# => [{"aqi"=>57, "area"=>"上海", "o3"=>0, "o3_24h"=>0, "o3_8h"=>0, "o3_8h_24h"=>0, "position_name" ...
```
##### PM10: 颗粒物(粒径小于等于10μm)
```ruby
ChinaAqi::PM10.new('上海').get # or ChinaAqi::PM10.get('上海')
# => [{"aqi"=>57, "area"=>"上海", "pm10"=>55, "pm10_24h"=>64, "position_name"=>"普陀", "primary_pollutant" ...
```
##### PM2.5: 颗粒物(粒径小于等于2.5μm)
```ruby
ChinaAqi::PM25.new('shanghai').get # or ChinaAqi::PM25.get('shanghai')
# => [{"aqi"=>57, "area"=>"上海", "pm2_5"=>21, "pm2_5_24h"=>38, "position_name"=>"普陀", "primary_pollutant" ...
```
##### SO2: 二氧化硫
```ruby
ChinaAqi::SO2.new('shanghai').get # or ChinaAqi::SO2.get('shanghai')
# => [{"aqi"=>57, "area"=>"上海", "so2"=>0, "so2_24h"=>0, "position_name"=>"普陀", "primary_pollutant" ...
```
##### Simple data for all monitoring stations in one city
```ruby
ChinaAqi::City.new('shanghai').get # or ChinaAqi::City.get('shanghai')
# => [{"aqi"=>57, "area"=>"上海", "so2"=>0, "so2_24h"=>0, "position_name"=>"普陀", "primary_pollutant" ...
```
##### Detail data for all monitoring stations in one city
```ruby
ChinaAqi::CityPro.new('shanghai').get # or ChinaAqi::CityPro.get('shanghai')
# => [{"aqi"=>57, "area"=>"上海", "co"=>0.0, "co_24h"=>0.0, "no2"=>0, "no2_24h"=>0, ...
```
##### Detail data for one monitoring station
```ruby
ChinaAqi::Station.new('1141A').get # or ChinaAqi::Station.get('1141A')
# => [{"aqi"=>57, "area"=>"上海", "co"=>0.0, "co_24h"=>0.0, "no2"=>0, "no2_24h"=>0, ...
```
##### Fetch all data
```ruby
ChinaAqi::Global.new.get
# same as below:
ChinaAqi::Global.get
# => [{"aqi"=>57, "area"=>"上海", "co"=>0.0, "co_24h"=>0.0, "no2"=>0, "no2_24h"=>0, ...
```
##### AQI Ranking for China
```ruby
ChinaAqi::Ranking.new.get
# same as below:
ChinaAqi::Ranking.get
# => [{"aqi"=>57, "area"=>"上海", "co"=>0.0, "co_24h"=>0.0, "no2"=>0, "no2_24h"=>0, ...
```
### Helpers
```ruby
# Get station names and station codes for one city
ChinaAqi.get_stations_for_city('上海')
ChinaAqi.get_stations_for_city('shanghai')
ChinaAqi.get_stations_for_city('021')
# same as:
ChinaAqi::CityStations.get('上海/shanghai/021')
# {"city"=>"上海", "stations"=>[{"station_name"=>"普陀" ...
# Get the list for cities which have AQI data.
ChinaAqi.available_cities
# {"cities"=>["七台河", "三亚", "三明", "三门峡" ...
```
## Contributing
1. Fork it
2. Create your feature branch (`git checkout -b my-new-feature`)
3. Commit your changes (`git commit -am 'Add some feature'`)
4. Push to the branch (`git push origin my-new-feature`)
5. Create new Pull Request
[pm25_in]: http://www.pm25.in
[pm25_in_api]: http://www.pm25.in/api_doc