Method getFieldInstanceByName
has 41 lines of code (exceeds 25 allowed). Consider refactoring. Open
public function getFieldInstanceByName($name)
{
if (!isset($this->customFields[$name])) {
return parent::getFieldInstanceByName($name);
}
Function setDataFromRequest
has a Cognitive Complexity of 7 (exceeds 5 allowed). Consider refactoring. Open
public function setDataFromRequest(App\Request $request)
{
parent::setDataFromRequest($request);
foreach ($this->customFields as $fieldName => $fieldInfo) {
if ($request->has($fieldName)) {
- Read upRead up
Cognitive Complexity
Cognitive Complexity is a measure of how difficult a unit of code is to intuitively understand. Unlike Cyclomatic Complexity, which determines how difficult your code will be to test, Cognitive Complexity tells you how difficult your code will be to read and comprehend.
A method's cognitive complexity is based on a few simple rules:
- Code is not considered more complex when it uses shorthand that the language provides for collapsing multiple statements into one
- Code is considered more complex for each "break in the linear flow of the code"
- Code is considered more complex when "flow breaking structures are nested"
Further reading
Function getFieldInstanceByName
has a Cognitive Complexity of 6 (exceeds 5 allowed). Consider refactoring. Open
public function getFieldInstanceByName($name)
{
if (!isset($this->customFields[$name])) {
return parent::getFieldInstanceByName($name);
}
- Read upRead up
Cognitive Complexity
Cognitive Complexity is a measure of how difficult a unit of code is to intuitively understand. Unlike Cyclomatic Complexity, which determines how difficult your code will be to test, Cognitive Complexity tells you how difficult your code will be to read and comprehend.
A method's cognitive complexity is based on a few simple rules:
- Code is not considered more complex when it uses shorthand that the language provides for collapsing multiple statements into one
- Code is considered more complex for each "break in the linear flow of the code"
- Code is considered more complex when "flow breaking structures are nested"
Further reading
Refactor this function to reduce its Cognitive Complexity from 18 to the 15 allowed. Open
public function setDataFromRequest(App\Request $request)
- Read upRead up
- Exclude checks
Cognitive Complexity is a measure of how hard the control flow of a function is to understand. Functions with high Cognitive Complexity will be difficult to maintain.
See
Avoid using static access to class '\App\Json' in method 'setDataFromRequest'. Open
$data = $this->get('data') ? \App\Json::decode($this->get('data')) : [];
- Read upRead up
- Exclude checks
StaticAccess
Since: 1.4.0
Static access causes unexchangeable dependencies to other classes and leads to hard to test code. Avoid using static access at all costs and instead inject dependencies through the constructor. The only case when static access is acceptable is when used for factory methods.
Example
class Foo
{
public function bar()
{
Bar::baz();
}
}
Source https://phpmd.org/rules/cleancode.html#staticaccess
Avoid using static access to class '\App\Json' in method 'setDataFromRequest'. Open
$owners = $this->get('owners') ? \App\Json::decode($this->get('owners')) : [];
- Read upRead up
- Exclude checks
StaticAccess
Since: 1.4.0
Static access causes unexchangeable dependencies to other classes and leads to hard to test code. Avoid using static access at all costs and instead inject dependencies through the constructor. The only case when static access is acceptable is when used for factory methods.
Example
class Foo
{
public function bar()
{
Bar::baz();
}
}
Source https://phpmd.org/rules/cleancode.html#staticaccess
Avoid using static access to class '\Vtiger_Field_Model' in method 'getFieldInstanceByName'. Open
return \Vtiger_Field_Model::init($moduleName, $params, $name);
- Read upRead up
- Exclude checks
StaticAccess
Since: 1.4.0
Static access causes unexchangeable dependencies to other classes and leads to hard to test code. Avoid using static access at all costs and instead inject dependencies through the constructor. The only case when static access is acceptable is when used for factory methods.
Example
class Foo
{
public function bar()
{
Bar::baz();
}
}
Source https://phpmd.org/rules/cleancode.html#staticaccess
Avoid using static access to class '\App\Json' in method 'setDataFromRequest'. Open
$this->set('data', \App\Json::encode($data));
- Read upRead up
- Exclude checks
StaticAccess
Since: 1.4.0
Static access causes unexchangeable dependencies to other classes and leads to hard to test code. Avoid using static access at all costs and instead inject dependencies through the constructor. The only case when static access is acceptable is when used for factory methods.
Example
class Foo
{
public function bar()
{
Bar::baz();
}
}
Source https://phpmd.org/rules/cleancode.html#staticaccess
Avoid using static access to class '\App\Json' in method 'setDataFromRequest'. Open
$this->set('owners', \App\Json::encode($owners));
- Read upRead up
- Exclude checks
StaticAccess
Since: 1.4.0
Static access causes unexchangeable dependencies to other classes and leads to hard to test code. Avoid using static access at all costs and instead inject dependencies through the constructor. The only case when static access is acceptable is when used for factory methods.
Example
class Foo
{
public function bar()
{
Bar::baz();
}
}
Source https://phpmd.org/rules/cleancode.html#staticaccess
Avoid using static access to class '\App\Json' in method 'getFieldInstanceByName'. Open
$data = $this->get('data') ? \App\Json::decode($this->get('data')) : [];
- Read upRead up
- Exclude checks
StaticAccess
Since: 1.4.0
Static access causes unexchangeable dependencies to other classes and leads to hard to test code. Avoid using static access at all costs and instead inject dependencies through the constructor. The only case when static access is acceptable is when used for factory methods.
Example
class Foo
{
public function bar()
{
Bar::baz();
}
}
Source https://phpmd.org/rules/cleancode.html#staticaccess
Avoid using static access to class '\App\Language' in method 'getFieldInstanceByName'. Open
$params['picklistValues'][$key] = \App\Language::translate($label, $moduleName);
- Read upRead up
- Exclude checks
StaticAccess
Since: 1.4.0
Static access causes unexchangeable dependencies to other classes and leads to hard to test code. Avoid using static access at all costs and instead inject dependencies through the constructor. The only case when static access is acceptable is when used for factory methods.
Example
class Foo
{
public function bar()
{
Bar::baz();
}
}
Source https://phpmd.org/rules/cleancode.html#staticaccess
Avoid using static access to class '\App\Json' in method 'getFieldInstanceByName'. Open
$owners = $this->get('owners') ? \App\Json::decode($this->get('owners')) : [];
- Read upRead up
- Exclude checks
StaticAccess
Since: 1.4.0
Static access causes unexchangeable dependencies to other classes and leads to hard to test code. Avoid using static access at all costs and instead inject dependencies through the constructor. The only case when static access is acceptable is when used for factory methods.
Example
class Foo
{
public function bar()
{
Bar::baz();
}
}
Source https://phpmd.org/rules/cleancode.html#staticaccess
Define a constant instead of duplicating this literal "owners" 5 times. Open
$owners = $this->get('owners') ? \App\Json::decode($this->get('owners')) : [];
- Read upRead up
- Exclude checks
Duplicated string literals make the process of refactoring error-prone, since you must be sure to update all occurrences.
On the other hand, constants can be referenced from many places, but only need to be updated in a single place.
Noncompliant Code Example
With the default threshold of 3:
function run() { prepare('action1'); // Non-Compliant - 'action1' is duplicated 3 times execute('action1'); release('action1'); }
Compliant Solution
ACTION_1 = 'action1'; function run() { prepare(ACTION_1); execute(ACTION_1); release(ACTION_1); }
Exceptions
To prevent generating some false-positives, literals having less than 5 characters are excluded.
Define a constant instead of duplicating this literal "label" 6 times. Open
'owners_all' => ['label' => 'LBL_FILTERS_AVAILABLE', 'purifyType' => \App\Purifier::STANDARD],
- Read upRead up
- Exclude checks
Duplicated string literals make the process of refactoring error-prone, since you must be sure to update all occurrences.
On the other hand, constants can be referenced from many places, but only need to be updated in a single place.
Noncompliant Code Example
With the default threshold of 3:
function run() { prepare('action1'); // Non-Compliant - 'action1' is duplicated 3 times execute('action1'); release('action1'); }
Compliant Solution
ACTION_1 = 'action1'; function run() { prepare(ACTION_1); execute(ACTION_1); release(ACTION_1); }
Exceptions
To prevent generating some false-positives, literals having less than 5 characters are excluded.
Define a constant instead of duplicating this literal "purifyType" 5 times. Open
'owners_all' => ['label' => 'LBL_FILTERS_AVAILABLE', 'purifyType' => \App\Purifier::STANDARD],
- Read upRead up
- Exclude checks
Duplicated string literals make the process of refactoring error-prone, since you must be sure to update all occurrences.
On the other hand, constants can be referenced from many places, but only need to be updated in a single place.
Noncompliant Code Example
With the default threshold of 3:
function run() { prepare('action1'); // Non-Compliant - 'action1' is duplicated 3 times execute('action1'); release('action1'); }
Compliant Solution
ACTION_1 = 'action1'; function run() { prepare(ACTION_1); execute(ACTION_1); release(ACTION_1); }
Exceptions
To prevent generating some false-positives, literals having less than 5 characters are excluded.
Define a constant instead of duplicating this literal "owners_all" 3 times. Open
'owners_all' => ['label' => 'LBL_FILTERS_AVAILABLE', 'purifyType' => \App\Purifier::STANDARD],
- Read upRead up
- Exclude checks
Duplicated string literals make the process of refactoring error-prone, since you must be sure to update all occurrences.
On the other hand, constants can be referenced from many places, but only need to be updated in a single place.
Noncompliant Code Example
With the default threshold of 3:
function run() { prepare('action1'); // Non-Compliant - 'action1' is duplicated 3 times execute('action1'); release('action1'); }
Compliant Solution
ACTION_1 = 'action1'; function run() { prepare(ACTION_1); execute(ACTION_1); release(ACTION_1); }
Exceptions
To prevent generating some false-positives, literals having less than 5 characters are excluded.
Define a constant instead of duplicating this literal "plotTickSize" 3 times. Open
'plotTickSize' => ['label' => 'LBL_TICK_SIZE', 'purifyType' => \App\Purifier::TEXT],
- Read upRead up
- Exclude checks
Duplicated string literals make the process of refactoring error-prone, since you must be sure to update all occurrences.
On the other hand, constants can be referenced from many places, but only need to be updated in a single place.
Noncompliant Code Example
With the default threshold of 3:
function run() { prepare('action1'); // Non-Compliant - 'action1' is duplicated 3 times execute('action1'); release('action1'); }
Compliant Solution
ACTION_1 = 'action1'; function run() { prepare(ACTION_1); execute(ACTION_1); release(ACTION_1); }
Exceptions
To prevent generating some false-positives, literals having less than 5 characters are excluded.
Define a constant instead of duplicating this literal "plotLimit" 3 times. Open
'plotLimit' => ['label' => 'LBL_MAXIMUM_VALUE', 'purifyType' => \App\Purifier::TEXT]
- Read upRead up
- Exclude checks
Duplicated string literals make the process of refactoring error-prone, since you must be sure to update all occurrences.
On the other hand, constants can be referenced from many places, but only need to be updated in a single place.
Noncompliant Code Example
With the default threshold of 3:
function run() { prepare('action1'); // Non-Compliant - 'action1' is duplicated 3 times execute('action1'); release('action1'); }
Compliant Solution
ACTION_1 = 'action1'; function run() { prepare(ACTION_1); execute(ACTION_1); release(ACTION_1); }
Exceptions
To prevent generating some false-positives, literals having less than 5 characters are excluded.
Call to undeclared method \FInvoice_SummationByMonthsModel_Dashboard::get
Open
$data = $this->get('data') ? \App\Json::decode($this->get('data')) : [];
- Exclude checks
Call to undeclared method \FInvoice_SummationByMonthsModel_Dashboard::set
Open
$this->set('data', \App\Json::encode($data));
- Exclude checks
Reference to undeclared property \FInvoice_SummationByMonthsModel_Dashboard->editFields
Open
return $this->editFields + $fields + $this->customFields;
- Exclude checks
Class extends undeclared class \Vtiger_Widget_Model
Open
class FInvoice_SummationByMonthsModel_Dashboard extends Vtiger_Widget_Model
- Exclude checks
Reference to undeclared class \Vtiger_Widget_Model
Open
return parent::getFieldInstanceByName($name);
- Exclude checks
Call to undeclared method \FInvoice_SummationByMonthsModel_Dashboard::get
Open
$owners = $this->get('owners') ? \App\Json::decode($this->get('owners')) : [];
- Exclude checks
Call to undeclared method \FInvoice_SummationByMonthsModel_Dashboard::get
Open
$data = $this->get('data') ? \App\Json::decode($this->get('data')) : [];
- Exclude checks
Call to undeclared method \FInvoice_SummationByMonthsModel_Dashboard::set
Open
$this->set('owners', \App\Json::encode($owners));
- Exclude checks
Reference to undeclared class \Vtiger_Widget_Model
Open
parent::setDataFromRequest($request);
- Exclude checks
Call to undeclared method \FInvoice_SummationByMonthsModel_Dashboard::get
Open
$owners = $this->get('owners') ? \App\Json::decode($this->get('owners')) : [];
- Exclude checks
Identical blocks of code found in 2 locations. Consider refactoring. Open
case 'owners_all':
$value = $value ? explode(' |##| ', $value) : [];
$owners = $this->get('owners') ? \App\Json::decode($this->get('owners')) : [];
$owners['available'] = $value;
$this->set('owners', \App\Json::encode($owners));
- Read upRead up
Duplicated Code
Duplicated code can lead to software that is hard to understand and difficult to change. The Don't Repeat Yourself (DRY) principle states:
Every piece of knowledge must have a single, unambiguous, authoritative representation within a system.
When you violate DRY, bugs and maintenance problems are sure to follow. Duplicated code has a tendency to both continue to replicate and also to diverge (leaving bugs as two similar implementations differ in subtle ways).
Tuning
This issue has a mass of 92.
We set useful threshold defaults for the languages we support but you may want to adjust these settings based on your project guidelines.
The threshold configuration represents the minimum mass a code block must have to be analyzed for duplication. The lower the threshold, the more fine-grained the comparison.
If the engine is too easily reporting duplication, try raising the threshold. If you suspect that the engine isn't catching enough duplication, try lowering the threshold. The best setting tends to differ from language to language.
See codeclimate-duplication
's documentation for more information about tuning the mass threshold in your .codeclimate.yml
.
Refactorings
- Extract Method
- Extract Class
- Form Template Method
- Introduce Null Object
- Pull Up Method
- Pull Up Field
- Substitute Algorithm
Further Reading
- Don't Repeat Yourself on the C2 Wiki
- Duplicated Code on SourceMaking
- Refactoring: Improving the Design of Existing Code by Martin Fowler. Duplicated Code, p76
Avoid excessively long class names like FInvoice_SummationByMonthsModel_Dashboard. Keep class name length under 40. Open
class FInvoice_SummationByMonthsModel_Dashboard extends Vtiger_Widget_Model
{
/** {@inheritdoc} */
public $customFields = [
'owners_all' => ['label' => 'LBL_FILTERS_AVAILABLE', 'purifyType' => \App\Purifier::STANDARD],
- Read upRead up
- Exclude checks
LongClassName
Since: 2.9
Detects when classes or interfaces are declared with excessively long names.
Example
class ATooLongClassNameThatHintsAtADesignProblem {
}
interface ATooLongInterfaceNameThatHintsAtADesignProblem {
}
Source https://phpmd.org/rules/naming.html#longclassname
Each class must be in a namespace of at least one level (a top-level vendor name) Open
class FInvoice_SummationByMonthsModel_Dashboard extends Vtiger_Widget_Model
- Exclude checks
The class FInvoice_SummationByMonthsModel_Dashboard is not named in CamelCase. Open
class FInvoice_SummationByMonthsModel_Dashboard extends Vtiger_Widget_Model
{
/** {@inheritdoc} */
public $customFields = [
'owners_all' => ['label' => 'LBL_FILTERS_AVAILABLE', 'purifyType' => \App\Purifier::STANDARD],
- Read upRead up
- Exclude checks
CamelCaseClassName
Since: 0.2
It is considered best practice to use the CamelCase notation to name classes.
Example
class class_name {
}
Source
Terminating statement must be on a line by itself Open
default: break;
- Exclude checks
The DEFAULT body must start on the line following the statement Open
default: break;
- Exclude checks
Terminating statement must be on a line by itself Open
default: break;
- Exclude checks
The DEFAULT body must start on the line following the statement Open
default: break;
- Exclude checks
Spaces must be used to indent lines; tabs are not allowed Open
'plotLimit' => ['label' => 'LBL_MAXIMUM_VALUE', 'purifyType' => \App\Purifier::TEXT]
- Exclude checks
Spaces must be used to indent lines; tabs are not allowed Open
$fields['default_owner'] = ['label' => 'LBL_DEFAULT_FILTER', 'purifyType' => \App\Purifier::STANDARD];
- Exclude checks
Spaces must be used to indent lines; tabs are not allowed Open
}
- Exclude checks
Spaces must be used to indent lines; tabs are not allowed Open
public function setDataFromRequest(App\Request $request)
- Exclude checks
Spaces must be used to indent lines; tabs are not allowed Open
$params['uitype'] = 7;
- Exclude checks
Spaces must be used to indent lines; tabs are not allowed Open
}
- Exclude checks
Spaces must be used to indent lines; tabs are not allowed Open
'groups' => 'LBL_GROUPS',
- Exclude checks
Spaces must be used to indent lines; tabs are not allowed Open
if (!isset($this->customFields[$name])) {
- Exclude checks
Spaces must be used to indent lines; tabs are not allowed Open
'tooltip' => $this->getEditFields()[$name]['tooltip'] ?? ''
- Exclude checks
Spaces must be used to indent lines; tabs are not allowed Open
case 'plotLimit':
- Exclude checks
Spaces must be used to indent lines; tabs are not allowed Open
$params['maximumlength'] = '100';
- Exclude checks
Spaces must be used to indent lines; tabs are not allowed Open
}
- Exclude checks
Spaces must be used to indent lines; tabs are not allowed Open
$owners = $this->get('owners') ? \App\Json::decode($this->get('owners')) : [];
- Exclude checks
Spaces must be used to indent lines; tabs are not allowed Open
$params['fieldvalue'] = implode(' |##| ', $value);
- Exclude checks
Spaces must be used to indent lines; tabs are not allowed Open
}
- Exclude checks
Spaces must be used to indent lines; tabs are not allowed Open
$moduleName = 'Settings:WidgetsManagement';
- Exclude checks
Spaces must be used to indent lines; tabs are not allowed Open
$params['typeofdata'] = 'I~M';
- Exclude checks
Spaces must be used to indent lines; tabs are not allowed Open
{
- Exclude checks
Spaces must be used to indent lines; tabs are not allowed Open
$value = $fieldModel->getDBValue($value);
- Exclude checks
Spaces must be used to indent lines; tabs are not allowed Open
return parent::getFieldInstanceByName($name);
- Exclude checks
Spaces must be used to indent lines; tabs are not allowed Open
break;
- Exclude checks
Spaces must be used to indent lines; tabs are not allowed Open
'groupUsers' => 'LBL_GROUP_USERS',
- Exclude checks
Spaces must be used to indent lines; tabs are not allowed Open
'rsUsers' => 'LBL_ROLE_AND_SUBORDINATES_USERS'
- Exclude checks
Spaces must be used to indent lines; tabs are not allowed Open
break;
- Exclude checks
Spaces must be used to indent lines; tabs are not allowed Open
$this->set('owners', \App\Json::encode($owners));
- Exclude checks
Spaces must be used to indent lines; tabs are not allowed Open
return $this->editFields + $fields + $this->customFields;
- Exclude checks
Spaces must be used to indent lines; tabs are not allowed Open
public function getFieldInstanceByName($name)
- Exclude checks
Spaces must be used to indent lines; tabs are not allowed Open
$data = $this->get('data') ? \App\Json::decode($this->get('data')) : [];
- Exclude checks
Spaces must be used to indent lines; tabs are not allowed Open
];
- Exclude checks
Spaces must be used to indent lines; tabs are not allowed Open
return \Vtiger_Field_Model::init($moduleName, $params, $name);
- Exclude checks
Spaces must be used to indent lines; tabs are not allowed Open
break;
- Exclude checks
Spaces must be used to indent lines; tabs are not allowed Open
public $customFields = [
- Exclude checks
Spaces must be used to indent lines; tabs are not allowed Open
default: break;
- Exclude checks
Spaces must be used to indent lines; tabs are not allowed Open
/** {@inheritdoc} */
- Exclude checks
Spaces must be used to indent lines; tabs are not allowed Open
foreach ($this->customFields as $fieldName => $fieldInfo) {
- Exclude checks
Spaces must be used to indent lines; tabs are not allowed Open
$data = $this->get('data') ? \App\Json::decode($this->get('data')) : [];
- Exclude checks
Spaces must be used to indent lines; tabs are not allowed Open
$value = $value ? explode(' |##| ', $value) : [];
- Exclude checks
Spaces must be used to indent lines; tabs are not allowed Open
/** {@inheritdoc} */
- Exclude checks
Spaces must be used to indent lines; tabs are not allowed Open
public function getEditFields(): array
- Exclude checks
Spaces must be used to indent lines; tabs are not allowed Open
{
- Exclude checks
Spaces must be used to indent lines; tabs are not allowed Open
'label' => $this->getEditFields()[$name]['label'],
- Exclude checks
Spaces must be used to indent lines; tabs are not allowed Open
$fieldModel->validate($value, true);
- Exclude checks
Spaces must be used to indent lines; tabs are not allowed Open
'plotTickSize' => ['label' => 'LBL_TICK_SIZE', 'purifyType' => \App\Purifier::TEXT],
- Exclude checks
Spaces must be used to indent lines; tabs are not allowed Open
'mine' => 'LBL_MINE',
- Exclude checks
Spaces must be used to indent lines; tabs are not allowed Open
}
- Exclude checks
Spaces must be used to indent lines; tabs are not allowed Open
$value = $request->getByType($fieldName, $fieldInfo['purifyType']);
- Exclude checks
Spaces must be used to indent lines; tabs are not allowed Open
$data[$fieldName] = $value;
- Exclude checks
Spaces must be used to indent lines; tabs are not allowed Open
$this->set('data', \App\Json::encode($data));
- Exclude checks
Spaces must be used to indent lines; tabs are not allowed Open
$fields = [];
- Exclude checks
Spaces must be used to indent lines; tabs are not allowed Open
];
- Exclude checks
Spaces must be used to indent lines; tabs are not allowed Open
switch ($name) {
- Exclude checks
Spaces must be used to indent lines; tabs are not allowed Open
$picklistValue = [
- Exclude checks
Spaces must be used to indent lines; tabs are not allowed Open
case 'plotLimit':
- Exclude checks
Spaces must be used to indent lines; tabs are not allowed Open
'owners_all' => ['label' => 'LBL_FILTERS_AVAILABLE', 'purifyType' => \App\Purifier::STANDARD],
- Exclude checks
Spaces must be used to indent lines; tabs are not allowed Open
/** {@inheritdoc} */
- Exclude checks
Spaces must be used to indent lines; tabs are not allowed Open
'name' => $name,
- Exclude checks
Spaces must be used to indent lines; tabs are not allowed Open
case 'plotTickSize':
- Exclude checks
Spaces must be used to indent lines; tabs are not allowed Open
$params['maximumlength'] = '0,99999999999';
- Exclude checks
Spaces must be used to indent lines; tabs are not allowed Open
$params['uitype'] = 33;
- Exclude checks
Spaces must be used to indent lines; tabs are not allowed Open
$params['typeofdata'] = 'V~M';
- Exclude checks
Spaces must be used to indent lines; tabs are not allowed Open
'users' => 'LBL_USERS',
- Exclude checks
Spaces must be used to indent lines; tabs are not allowed Open
'roleUsers' => 'LBL_ROLE_USERS',
- Exclude checks
Spaces must be used to indent lines; tabs are not allowed Open
foreach ($picklistValue as $key => $label) {
- Exclude checks
Spaces must be used to indent lines; tabs are not allowed Open
$params['picklistValues'][$key] = \App\Language::translate($label, $moduleName);
- Exclude checks
Spaces must be used to indent lines; tabs are not allowed Open
if ($request->has($fieldName)) {
- Exclude checks
Spaces must be used to indent lines; tabs are not allowed Open
default: break;
- Exclude checks
Spaces must be used to indent lines; tabs are not allowed Open
}
- Exclude checks
Spaces must be used to indent lines; tabs are not allowed Open
case 'owners_all':
- Exclude checks
Spaces must be used to indent lines; tabs are not allowed Open
parent::setDataFromRequest($request);
- Exclude checks
Spaces must be used to indent lines; tabs are not allowed Open
case 'owners_all':
- Exclude checks
Spaces must be used to indent lines; tabs are not allowed Open
}
- Exclude checks
Spaces must be used to indent lines; tabs are not allowed Open
$params = [
- Exclude checks
Spaces must be used to indent lines; tabs are not allowed Open
$params['fieldvalue'] = $data[$name] ?? 0;
- Exclude checks
Spaces must be used to indent lines; tabs are not allowed Open
}
- Exclude checks
Spaces must be used to indent lines; tabs are not allowed Open
switch ($fieldName) {
- Exclude checks
Spaces must be used to indent lines; tabs are not allowed Open
$owners = $this->get('owners') ? \App\Json::decode($this->get('owners')) : [];
- Exclude checks
Spaces must be used to indent lines; tabs are not allowed Open
break;
- Exclude checks
Spaces must be used to indent lines; tabs are not allowed Open
'all' => 'LBL_ALL',
- Exclude checks
Spaces must be used to indent lines; tabs are not allowed Open
{
- Exclude checks
Spaces must be used to indent lines; tabs are not allowed Open
case 'plotTickSize':
- Exclude checks
Spaces must be used to indent lines; tabs are not allowed Open
$owners['available'] = $value;
- Exclude checks
Spaces must be used to indent lines; tabs are not allowed Open
/** {@inheritdoc} */
- Exclude checks
Spaces must be used to indent lines; tabs are not allowed Open
];
- Exclude checks
Spaces must be used to indent lines; tabs are not allowed Open
$value = $owners['available'] ?? [];
- Exclude checks
Spaces must be used to indent lines; tabs are not allowed Open
$fieldModel = $this->getFieldInstanceByName($fieldName)->getUITypeModel();
- Exclude checks
Spaces must be used to indent lines; tabs are not allowed Open
}
- Exclude checks
Class name "FInvoice_SummationByMonthsModel_Dashboard" is not in camel caps format Open
class FInvoice_SummationByMonthsModel_Dashboard extends Vtiger_Widget_Model
- Exclude checks
Closing brace must be on a line by itself Open
default: break;
- Exclude checks
Closing brace must be on a line by itself Open
default: break;
- Exclude checks